Rode

Notes: The DS2 is a compact desktop studio arm that's ideal for microphones, cameras, smartphones, lights and other accessories up to 900g. With its heavy base stand, there's no need for clamps or mounting points - simply sit it on your desk or other flat surface. It features two pivot points so you can quickly reposition your equipment, and its integrated cable guide slots will ensure your desktop remains tidy.

Weight (grams): 1471g
Dimensions (millimetres):
Length: 170mm
Width: 120mm
Height (folded): 190mm
Height (extended): 380mm
Maximum Capacity: 900g

Compatible Products (including, but not limited to): Can be used with any microphone, accessory or other product that is under 900g and either features or is compatible with an accessory that has a 3/8" or 1/4" thread mount.

Thread Mount: 3/8"-16 UNC Thread (1/4"- 20 UNC adapter included in the box)

In The Box:
DS2 Arm
DS2 Base
M4 Screws (x2)
3/8" to 1/4" thread adapter
M3 Hex key
Quick Start Guide

Notes: The Rode M2 is a rugged live performance condenser microphone designed to provide a full frequency response and premium performance.

Featuring a tailored-for-stage super-cardioid polar pattern and an internally shock mounted 1/2" condenser capsule, the M2 provides a high quality alternative to dynamic microphones for live performance. The addition of an on/off switch adds versatility for artists that prefer greater control over their sound, while a lock ensures that the microphone cannot be accidentally switched.

The Rode M2 live performance condenser microphone is covered by Rode Microphones' industry leading 10 year warranty.

Notes: The Rode M3 is a highly versatile condenser microphone powered by 9V battery or phantom power.

Featuring a heavy duty metal body and internally shock mounted 1/2" condenser capsule mounted for end-address, the M3 is at home in the studio, on stage or on location and is equally suitable as a vocal microphone, guitar microphone, drum microphone or presenter microphone.

A -10 dB and -20 dB level attenuation (or PAD), selectable from inside the battery compartment, allows recording of loud sound sources, such as a guitar amplifier or drum. A high-pass filter selectable on the microphone power switch introduces a filter at 80Hz to reduce low frequency sounds and handling noise.

The M3 also comes complete with windshield and a stand mount, and can be powered via a 9V battery or 24-48V Phantom.

The Rode M3 versatile multi-powered microphone is covered by Rode Microphones' industry leading 10 year warranty.

Notes: The Magnetic Mount is a versatile magnetic mounting system for attaching microphones, lights and other accessories to any MagSafe iPhone or other smartphone with a magnetic case. It features an ultra-strong magnet for complete security, even with vigorous use, and comes with three removeable attachments for maximum flexibility. This includes both short and long cold shoe arms for shooting in landscape or portrait mode, plus a long arm for mounting your smartphone onto a tripod, handle or desktop arm for use in a wide range of video or content creation applications.

Mechanical specifications- Magnetic Mount

Weight (grams): 75
Dimensions (millimetres):
Length: 57
Width: 12
Height: 57

Mechanical specifications- long cold shoe arm

Weight (grams): 15
Dimensions (millimetres): Length: 22
Height: 97

Mechanical specifications- short cold shoe arm

Weight (grams): 9
Dimensions (millimetres): Length: 22
Height: 52

Mechanical specifications - 14 inch tripod mount

Weight (grams): 31
Dimensions (millimetres): Length: 28
Height: 113

What's in the box

1 x Magnetic Mount
1 x Long Cold Shoe Arm
1 x Short Cold Shoe Arm
1 x 1/4-inch Tripod Mount

Notes: RODELink LAV is a professional-grade wearable microphone designed for use in a wide range of applications. The locking TRS connector is designed to pair perfectly with the RODELink range of wireless microphones and most recorders with a 3.5mm locking microphone input.

The RODELink LAV is perfect for anyone in need of a high-quality lavalier microphone with a rock-solid locking connector. It features a discreet 4.5mm omnidirectional microphone, which picks up sound from all directions, making it very forgiving when it comes to placement on talent.

A foam pop shield is supplied to minimise wind noise and vocal plosives (hard 'b', 't' and 'p' sounds), as well as a durable mounting clip with in-built cable management for quick and easy rigging. It also features a hard-wearing Kevlarr reinforced cable, designed to withstand the rigours of any...

Notes: The smartLav+ is a broadcast-grade wearable microphone designed for use in a wide range of film, television and broadcast scenarios, or wherever broadcast quality audio is required in a discreet, portable format without the complication and expense of additional wireless equipment.

With the smartLav+ the user simply mounts the microphone on the talent, connects it to a smartphone or tablet headset jack and records via the RODE Rec app for iOS, or any other audio app of their choice.

By employing a professional quality omni-directional condenser capsule the smartLav+ picks up sound equally from all around the microphone, allowing for versatility when mounting and ensuring a high degree of user-friendly operation.

A foam pop shield is supplied to minimise wind noise and vocal plosives (hard 'b', 't' and 'p' sounds), as well as a durable mounting clip with in-built cable management. Its Kevlarr reinforced cable ensures that you never stretch or snap your microphone under normal usage conditions.

The smartLav+ is compatible with any audio app that accepts input from the headset connection, however it has been designed to pair perfectly with RODE's RODE Rec app for Apple iOS devices. RODE Rec turns the user's iOS device into a fully-featured field recorder, with a wide range of equalisation presets to suit various recording situations, in addition to professional editing functions and the ability to publish to SoundCloud and Dropbox direct from the app.

Notes: The VideoMic GO II is a compact, lightweight on-camera shotgun microphone that makes capturing incredible audio incredibly easy. It features both an analogue 3.5mm TRS output and a digital USB-C output for use with a camera, smartphone, or computer*, making it super versatile. Annular line tube technology delivers crisp, clear sound for all content creation applications, and the included windshield and innovative HELIX isolation mount ensure your recordings are crystal-clear.

Ultra-lightweight shotgun microphone (just 60g)
3.5mm TRS output for use with cameras
Digital USB-C output for use with phones, tablets and computers*
HELIX isolation mount
No batteries required
Compatible with the RODE software suite for advanced features, including RODE Connect and RODE Capture

Acoustic & electrical specifications

Acoustic Principle: Pressure gradient electret condenser
Polar Pattern: Supercardioid
Frequency Response: 20Hz - 20kHz
Output Impedance: 2K2O
Signal to Noise Ratio: 79 dBA
Equivalent Noise (A-weighted): 15 dBA
Dynamic Range: 95 dBA Typical
Sensitivity: -31dBV(28.78mV @ 94dB SPL) i 1dB @ 1kHz
Max Input SPL: 110 dB SPL
Output Connections: 3.5mm TRS
USB-C
Computer Connectivity: USB-C (USB 2.0)
Simultaneous I/O: Stereo input and output when in USB mode
Power Requirements: 3.5mm plug-in power 2 - 5V
USB 5V
Bit Depth: 24-bit
Sample Rates: 48 kHz

Minimum OS Requirement:
macOS 10.15

Windows 10 (20H2)
iOS 14
Android 9.0

Mechanical specifications

Weight (grams): VideoMic GO II: 33 VideoMic GO II and included accessories: 60

Dimensions (millimetres):

VideoMic GO II:
Length: 120
Diameter: 21.6

VideoMic GO II and included accessories:
Length: 120
Width: 50.3
Height: 52.4

Compatible RODE Accessories:: WS12, SC14, SC15, SC16, SC17, SC18, SC19, SC20, SC21, SC22, SC23, SC24, SC25, SC26

Compatible RODE Software:
RODE Connect
RODE Central
RODE Reporter
RODE Capture

Included Accessories:
1 x SC14 TRS-TRS Cable
1 x Foam Windshield
1 x HELIX Isolation Mount

Notes: The VideoMic Me-C + is a high-quality microphone for Android and iOS mobile devices with a USB-C port, designed to give you incredible audio when shooting video. The microphone's directionality reduces surrounding noises to focus on exactly what you are filming, making sure your videos sound clear and intelligible. The 3.5mm jack provides a headphone output for audio monitoring and playback.

*Not compatible with iOS devices with a Lightning port

Designed for Android and iOS mobile devices with a USB-C port
3.5mm headphone output jack for direct monitoring
Furry windshield included to help reduce wind noise
Works seamlessly with RODE Capture, RODE Reporter and other recording apps

Acoustic & electrical specifications

Acoustic Principle: Pressure gradient electret condenser
Polar Pattern: Cardioid
Frequency Range: 20Hz - 20kHz
Equivalent Noise: 19.5 dBA SPL (as per IEC651)
Maximum SPL: 115dB SPL (1Hz @ 1m)
Power Requirements: 5VDC-100mA (bus-powered)
Analog Outputs: 3.5mm TRS headphone
Device Connectivity: USB Type-C
Bit Depth: 24-bit
Signal-to-Noise Ratio: 74.5 dB
Sample Rates: 44.1 and 48kHz
OS Requirements: iOS 17 or higher
Android 12 or higher

Mechanical specifications

Weight (grams): 27

Dimensions (millimetres):
Length: 74
Width: 20
Height: 28

What's in the box

VideoMic Me-C+
Mounting Clip
WS9

Notes: The VideoMic Me-L is a Lightning connector equipped high-quality directional microphone with a compact and lightweight body designed for Apple iOS devices. Its Lightning connector plugs directly into the device, utilising the device's internal power for instant plug-and-play - no batteries necessary. A standard 3.5mm headphone jack on the rear allows audio play-through in real-time and effortless audio playback.

The VideoMic Me-L is made from durable aluminium and coated in a military-grade ceramic finish, providing a hardwearing chassis that's resistant to scratching. It's a build quality far and away from the competition, reflected in superior sound. The microphone also comes packaged with a deluxe furry windshield for shooting outdoors and in adverse weather.

The VideoMic Me-L is suitable for vloggers, musicians and any iPhone users seeking to drastically improve their iOS device's quality of sound.

Notes: ***B-STOCK: Box damaged, product in perfect working order***


The VideoMic Me-L is a Lightning connector equipped high-quality directional microphone with a compact and lightweight body designed for Apple iOS devices. Its Lightning connector plugs directly into the device, utilising the device's internal power for instant plug-and-play - no batteries necessary. A standard 3.5mm headphone jack on the rear allows audio play-through in real-time and effortless audio playback.

The VideoMic Me-L is made from durable aluminium and coated in a military-grade ceramic finish, providing a hardwearing chassis that's resistant to scratching. It's a build quality far and away from the competition, reflected in superior sound. The microphone also comes packaged with a deluxe furry windshield for shooting outdoors and in adverse weather.

The VideoMic Me-L is suitable for vloggers, musicians and any iPhone users seeking to drastically improve their iOS device's quality of sound.

Notes: The Charge Case+ is a compact case for the Wireless GO (Gen 3) that keeps the entire system safe and secure when storing or taking it out on the road.

It features an integrated battery that delivers two full recharges for up to 21 hours of use and allows simultaneous data access to the complete system for Transferring recordings, adjusting settings and updating firmware.

Top Up and Transfer

The Charge Case+ provides a tidy solution for charging all three of your Wireless GO (Gen 3) units with a single USB-C cable, and thanks to its built-in battery, you can keep topping your units up while on the go as well with an extra two recharges on-board (21 hours total). You can also use the Charge Case+ to access the on-board recordings and update firmware for all of your units simultaneously.

Snug, Safe and Secure

With its tough exterior combined with an innovative zipping design, the Charge Case+ is perfect for keeping all three of your Wireless GO (Gen 3) units protected from knocks and bumps while on the road. Not only will your transmitters and receivers be recharging between jobs, but they will all be kept safe, secure and together.

Specifications

Electrical

Battery Capacity: 4200 mAH
Power Requirements: 5V/3A
Charging Time: Approx. 2 hours
Charge Current: 3A (max)
Configuration: 1 x RX, 2 x RX

Input: USB-C
Data Transfer: Yes

Mechanical:
Weight (grams)
185g (case only), 280 (with Wireless GO (Gen 3))
Dimensions (millimetres): 71 (H) x 98 (W) x 78 (D)

What's in the box:

1 x Charge Case+

Notes: The Charge Case is a handy charging case for the Wireless GO II. It accommodates both transmitters and the receiver and features an integrated battery that facilitates three full recharges for up to 30 hours of continuous use. With a rugged enclosure and zip system, it is also perfect for protecting the Wireless GO II when in transit or storage.

Notes: The Wireless ME TX is an ultra-compact wireless transmitter that makes recording professional audio for your videos effortless - perfect for expanding a RODE Series IV wireless system. It features both a 3.5mm TRS input for connecting external microphones like lavaliers or VideoMics, along with a built in omnidirectional mic, and thanks to the intelligent GainAssist technology, you can simply clip it onto your subject to be recording crystal-clear wireless audio in seconds.

Note: This product requires a RODE Series IV RX (receiver) to operate, such as the Wireless ME RX, Wireless GO II RX, RODECaster Pro II, RODECaster Duo or Streamer X.

RODE offers a 5-year warranty on this product.

This warranty will function just like any other RODE product warranty and the claim process remains unchanged - as long as the customer purchased an eligible product from an authorised dealer and can present proof of purchase, they can make a warranty claim within 5 years of the date of purchase.

Simple-to-use wireless transmitter for the RODE Series IV wireless system
Series IV 2.4 GHz digital transmission for crystal-clear recording with over 100m range
Intelligent GainAssist technology automatically adjusts volume levels on-the-fly
High-quality, built-in omnidirectional microphone
3.5mm TRS input for connecting external lavalier microphones or VideoMics
In-built rechargeable lithium-ion battery - up to 7 hours battery life
Requires a RODE Series IV receiver to operate (including Wireless ME RX, Wireless GO II RX, RODECaster Pro II, RODECaster Duo or Streamer X)

Acoustic & electrical specifications

Acoustic Principle: Pre-polarised pressure transducer
Polar Pattern: Omnidirectional
Frequency Range: 50Hz - 20kHz
Frequency Response:50 Hz - 20 kHz +/-3 dB
Maximum Input Level (3.5mm): 0 Gain 96.8dB
Microphone Preamp Gain: 0 Gain 118.0dBSPL per IEC 60268
Equivalent Noise (dBA): 0 Gain 17.7dBA, 50 Gain 18.3dBA, 75 Gain 19.7dBA, 100 Gain 19.9dBA
Analogue Inputs: TRS (Lavalier Microphone Input)
Analogue Outputs: TRS
Input Impedance: 2.2kO
Output Impedance:100O
Output Connection: 3.5mm headphone jack, USB-C
Computer Connectivity: USB-C (USB 2.0)
Form Factor: USB-C Broadcast Microphone
Power Requirements:5V @ 500mA (USB Bus Power)
Number of Preamps: One (1)Bit
Depth: 24-bit
Sample Rate:48 kHz

Operating Systems Requirements:

macOS 10.11 above, Windows 7 and above
iOS: iPhone 12 Pro Max, iPhone 12 Pro, iPhone 12, iPhone 12 mini, iPhone 11 Pro Max, iPhone 11 Pro, iPhone 11, iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPad Pro 10.5-inch, iPad Pro 12.9-inch (2nd generation), iPad Pro 9.7-inch, iPad Pro 12.9-inch (1st generation), iPad Air (3rd generation), iPad Air 2, iPad Air, iPad mini (5th generation), iPad mini 4, iPad mini 3, iPad mini 2, iPad (7th generation), iPad (6th generation), iPad (5th generation), iPod touch (7th generation), iPod touch (6th generation)
Android: Samsung S10+, Samsung A20, Samsung A51, Nokia 5.1, Nokia 8.1, Google Pixel 3a, Moto G7 Power
Power Requirements: Inbuilt Rechargeable Lithium-ion Battery Charged Via USB5V, 0.3A
Operating Time: 7 Hours
Transmission Range: 200m Line of sight

Mechanical specifications

Weight: 32g
Length: 44mm
Width: 45.3mm
Height: 18.3mm

Included Accessories:2 x Furry Windshields1 x SC22, 30cm USB-C to USB-C cable
RODE Software Compatibility: RODE Central, RODE Connect, RODE Reporter, RODE Capture

What's in the box

Wireless ME Transmitter Transmitter (TX)
Furry Windshields
SC22