Juno Daily

Music and tech news, interviews, features, reviews and more.

Visit Juno Daily

100% Sicheres Einkaufen

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Sicheres Einkaufen

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices. Visit Juno DJ

vinyl bestsellers
USD
Meine Sprache
Meine Währung
Your wishlist is empty
Items in wishlist:
Recently added:
Loading...
Cart
Dein Warenkorb ist leer.
Items in cart:
Zwischensumme:
Recently added:
Loading...
Warenkorb anzeigen
Startseite  Bestsellers  Studio Equipment  Studio Equipment  Diese Woche
Subscribe here to receive our weekly roundup of the latest studio equipment products

Filter

Show titles sold
Options
Artikel 1 bis 50 von 500 auf Seite 1 von 10 anzeigen
1  2  3  4  5  6  7  8  9  10  »
1
Vermona MEX3 meloDICER Expander Module
Cat: 990514 Rel: 02 Jan 24
 
Expander module designed for the meloDICER - 4HP
Notes: The Vermona MEX3 is a midi extension for the meloDICER sequencer and allows the sequencing of synthesizers outside the modular system.

Features:

MIDI output of sequences
Sequences can now be polyphonic with up to three voices
meloDICER can receive MIDI Control Change messages to remotely control all parameters.
All meloDICER controls can send MIDI Control Change messages
Direct synchronisation to a MIDI clock including shuffle conversion (e.g. from a Multiclock)
MeloDICER converts the MIDI real-time messages START, STOP and CONTINUE.
Module width: 4 TE
Power supply via meloDICER

Included in delivery:

MEX3
Connection cable to meloDICER
2 x MIDI cable DIN-3.5mm; 150 cm (Type A)
To use the meloDICER with the MEX3, the latest firmware must be installed. This can be downloaded from the manufacturer's website.
Read more
! low stock $161.56
Click for better price!
or call +44 20 7424 1960
quote 990514
2
Befaco 50cm Patch Cables (orange, pack of 5)
Cat: 668657 Rel: 09 Nov 17
 
5 x high quality orange patch cables
Notes: Pack of high Quality patch cables. Not too stiff, not too loose!

One colour for each size make Befaco patch cables just perfect to keep them organized!

This pack contains 5 high quality orange patch cables.
Read more
MRP:$12.67 SAVE 19%
 7 in stock $10.30
3
Befaco DIN5 MIDI To TRS Mini-Jack Type B Cable (grey, 1.5m, pack of 3)
Cat: 784170 Rel: 07 Dec 20
 
DIN5 to TRS cable
Notes: 3,5mm TRS to male DIN 5

150cm length
Read more
MRP:$12.67 SAVE 19%
 5 in stock $10.30
4
Make Noise Strega Semi-Modular Desktop Synthesiser
Make Noise Strega Semi-Modular Desktop Synthesiser (semi-modular desktop synthesiser)
Cat: 812045 Rel: 22 Mar 21
 
Desktop synthesiser
Notes: Make Noise is proud to introduce Strega!Strega is an audio alchemical experiment. Activate! Spill the tonic into time and let time decay through the filter to hear the results.

Strega is an instrument designed in collaboration with Alessandro Cortini. Inspired by Cortini's music and sonic experimentations, Strega embodies the seen and unseen, the sign and magic, the alchemy of sound.

Strega is able to conjure audio tones, generate control signals, and process external sounds. Patch the 0-COAST or any other line level source into the Strega to unlock new sounds!

This new instrument takes the same form factor as the 0-COAST and 0-CTRL. It was designed to be controlled by the 0-CTRL or the 0-COAST's MIDI CV B outputs and is equally happy interfacing with Eurorack modules as well.

Dimensions: 5.5 x 9 x .75 inches

Weight: 1.7lbs

Power Requirement: +15VDC @1A, 2.1mm Tip Positive Connector
Read more
MRP:$621.98 SAVE 12%
 1 in stock $548.06
5
Chord 5 Pin Din Plug To 5 Pin Din Plug MIDI Cable (1.5m)
Cat: 416484 Rel: 26 Jan 11
 
5 pin DIN to 5 pin DIN MIDI cable
Notes: A High quality MIDI cable for connecting music controllers and devices together. Strong and flexible cable with low loss conductors and global shielding ensure a clean data stream. Terminated at each end with a 180 degree 5 pin DIN plug.
Read more
MRP:$4.22 SAVE 50%
 4 in stock $2.10
6
4ms 90W Power Brick For Pods Or Row Powers (powers 300-500HP)
Cat: 711995 Rel: 12 Dec 18
 
External power supply for Pod enclosure
Notes: Power brick for powering Pods. One power brick can power up to 10 typical Pods. Pods can be daisy-chained using a Barrel Cable or Long Barrel Cable.

15-20V / 90W / 2.1mm Barrel Plug (5.5mm outer diameter) / Positive Centre.

Compatible power bricks are available wherever ROW POWER modules are sold. You also may use your own power brick if it meets the following requirements:

- 15V to 20V DC
- Positive centre 2.1mm barrel plug
- Minimum 30W output power
- Low-noise output
- Compatible with an IEC C5 cable

Please note: IEC cable not supplied
Read more
 1 in stock $27.98
7
Chord 6.3mm TRS Jack Plug To 6.3mm TRS Jack Plug Cable (0.75m)
Cat: 444517 Rel: 05 Jan 12
 
Audio cable
Notes: The Chord cable lead is the high quality audio lead for exceptional sound quality and reliability. The high grade cable comprises 2 insulated pure copper cores and global shielding. The durable PVC sheath has a soft texture and is reinforced with cotton cord to avoid tangling. Each end is terminated with a pro-quality 6.3mm stereo (TRS) jack plug.

Read more
MRP:$4.22 SAVE 19%
 2 in stock $3.43
8
Klavis Grainity Granular Digitally-Controlled Full-Analogue Path Granular & Multi-Mode VCF Module (silver)
Cat: 934965 Rel: 19 Dec 23
 
Digitally-controlled full-analogue path granular & multi-mode VCF module in 10HP.
Notes: A unique analogue take on granular synthesis, inspired by Yannis Xenakis, the Grainity pairs a granular filter with a multimode filter to create new textures and harmonics.

Supplier's Notes:
The Grainity brings a unique and never-heard-before concept to the world of analogue VCF.

While being based on analogue filtering only, the Grainity expands and enriches the sound in creating subharmonics, harmonies, unison, flanging effects and formant filtering all at once.

The module presents two sections, the granular filter itself and a typical multimode filter, each with its own output.

A third output offers a mix of both filter paths. Numerous controls and CV allow a very wide palette of results.

What is the Grainity

Granular?

The word granular was chosen for this filter module in relation to the concept invented by the composer Yannis Xenakis, and which is described as assembling small chops of sounds - he called grains - according to a pattern.

This is exactly what the Grainity does, no more no less ... but, digital control allows doing it in ways that are decades away from what tape and scissors allowed at the time.

Technology wise ...

In the granular section, the incoming sound cycle is determined in order to step through various filtering and phase variations of itself according to predefined patterns called structures.

The controls allow alterations to the cycling phase, cycling frequency offset (tuning), structure selection and frequency division of the filters cycling. This comes in addition to the usual filter frequency and resonance controls.

What the Grainity is not

Technology wise ...

Despite relying on a microprocessor, the Grainity is not a digital audio processor. At any time, the sound remains in the analog domain and goes through analog circuits from in to out.
The digital processor does not convert or generate audio signals; it is there to control the analog circuitry and manage the interface and display.

Sound wise ...

Several digital modules offering granular processing rely on the layering of sound grains, which leads to blurry and cloudy textures.
Layering of the grains is a late addition to the concept of granular synthesis and is not a mandatory feature of the concept.
The Grainity does not use delay lines or sampling memory but is nevertheless true to the foundations of the granular synthesis concept.

The granular VCF in the Grainity is unconventional in that, most of times, it is not filtering the sound in the common expectation of removing something. Typically, the granular process adds more than it removes by expanding both the lower range, creating subharmonics, and the upper harmonic contents in multiples ways.

Dimensions
10 HP
21 mm deep

Current Draw
101 mA +12V
59 mA -12V
Read more
 7 in stock $272.44
9
After Later Audio Resonate Rings-Redesigned Module
After Later Audio Resonate Rings-Redesigned Module (external/oscillator/filter synth module)
Cat: 900386 Rel: 20 Sep 22
 
Replica of the Mutable Instruments Rings module.
Notes: After Later's redesigned take on the classic Mutable Instruments Rings module offers all the distinctive resonant synth sounds you'd expect, from strings to percussion. Great value.

Supplier notes:
This is an exact hardware replica of the Mutable Instruments Rings module.
Read more
 1 in stock $196.40
Click for better price!
or call +44 20 7424 1960
quote 900386
10
Beyerdynamic DT770 Pro Closed Dynamic Studio Headphones (80 Ohm)
Cat: 386767 Rel: 14 Jun 12
 
Closed, diffuse-field studio headphone
Notes: Classic closed-back headphones in a low-impedance version designed to play nicely with outputs on phones, laptops and interfaces. One of the best all-round options for production.

Supplier's notes:
The Beyerdynamic DT 770 Headphones 80 Ohm are closed back dynamic headphones that use the same comfortable, sound isolating design as the 250 Ohm studio version, but with a lower resistance for general purpose and mobile applications. Because of the lower resistance, the DT 770 Pro 80 Ohm headphones are louder and work on low power devices such as smart phones, MP3 player, laptops and bus powered interfaces. Therefore, if you are working in a loud environment or using a battery operated device, the Beyerdynamic DT 770Pro 80 Ohm headphones make the perfect choice of headphone.

When out and about, you really need to block as much ambient noise out as possible and a lot of headphones do this by clamping the ear-pads as tightly to your ears as possible and using materials that absorb a lot of sound. This produces two unwanted issues; discomfort, after prolonged use; and a loss of audio quality as sound being generated by the driver is absorbed by the cup. The DT 700 Pro series avoids this by using a clever bass reflex system and a large circumaural cup design with velour pads. Of course the real technology is in the transducer itself, which produces a nominal frequency response of 5Hz to 35kHz and a nominal SPL of 96dB, an exceptional performance.
Read more
 2 in stock $134.30
11
Befaco 6-Way Multiple Stars Adapter (pack of 3)
Cat: 703559 Rel: 10 Oct 18
 
Passive signal distributors with six connectors
Notes: Pack of three, six-way, Befaco-branded multiples with six 3.5mm inputs.
Read more
MRP:$12.67 SAVE 19%
 5 in stock $10.30
12
ALM PPEXP-1 Pamela's Pro Workout Expander Module
Cat: 922391 Rel: 20 Jan 23
 
An expander module for Pamela's Pro Workout module in 4HP.
Notes: PRO Expanders:

Extra Pam Outputs.

ALM034-EX

PPEXP1 & PPEXP2 are two expander modules for Pamela's PRO Workout that both offer additional dedicated fixed clock, Din Sync & MIDI clock outputs.

Extend Pam as a master to clock external gear with super solid dedicated MIDI & Din Sync clock outputs. The Din Sync clock (x24) and Run outputs can also be patched into a 2nd Pam to easily sync it.

Use the extra fixed clocked gate outputs to free up Pam's main outputs for unique sequencing or complex modulation duties.

Connects directly to and is powered by the 'MIDI-EX' expander header on rear of Pamela's PRO Workout.

Only a single output expander is supported at any time but either can be used alongside an AXON-1 CV input expander.

A MIDI adapter cable and a Din Sync adapter cable are both available for connecting to 5 pin 'Din' type connectors. The PPEXP 1 includes a MIDI Din adapter cable.

Technical Specifications

Power: Additional approx +12V 40mA (PPEXP1) / 20mA (PPEXP2)
Size: 4HP & 2HP
Depth: 32mm
Read more
 1 in stock $124.60
Click for better price!
or call +44 20 7424 1960
quote 922391
13
Arturia KeyLab Essential 3 49-Key USB MIDI Keyboard Controller (white)
Cat: 946019 Rel: 23 May 23
 
A 49-key USB MIDI keyboard controller.
Notes: Arturia's new KeyLab Essential 3 offers a new level of accessible, enjoyable, and creative music making, redefining the essence of a modern universal keyboard controller.

From its refreshing new design, to its vastly upgraded creative workflow, to an expanded software package, it promises to shake up the affordable controller market by empowering modern musicians and sound explorers looking to expand their setup without breaking the bank.

Main selling points

Fit for any style and any setup

For DAW producers, musicians with hybrid setups, or performers using hardware; enhance any creative setup or musical style with MIDI out & USB power, deep DAW compatibility, and premium software.

The new standard for affordable keyboard controllers

A keyboard controller that doesn't need tons of controls, menu diving, or complex configuration to operate. KeyLab Essential 3 looks modern, feels great, and removes creative barriers for next-level music making.

Directly-linked with Arturia's industry-leading software ranges

Many musicians and producers will be familiar with Arturia's award-winning software; KeyLab Essential 3 is part of the same range, seamlessly integrating with Analog Lab V, Pigments, and V Collection.

New Features:
New creative features: Scale Mode, Chord Mode, and Arpeggiator, making composition, songwriting, and beat-making more intuitive than ever.
Custom DAW integration: KeyLab Essential 3 features custom scripts for deeper control over DAWs, including Ableton Live Logic Pro X, FL Studio, and more.
More versatile presets: The 2000 presets included with Analog Lab V are no longer limited to vintage sounds; users can enjoy unique hybrids, modern synths, orchestral sounds, and more.
Easier controls & interface: RGB-backlit pads with velocity and pressure sensitivity, contextual button, and a bright new 2.5" LCD screen for real-time feedback.
Expanded software package for beginners & pros: Now includes Analog Lab V, 2 pianos (UVI Model D, NI's The Gentleman), plus subscriptions to Loopcloud and Melodics.
Read more
MRP:$199.58 SAVE 15%
 1 in stock $170.54
14
Conductive Labs The NDLR v2 MIDI 4-Track Sequenced Arpeggiator/Chord & Drone Player
Cat: 968112 Rel: 10 Oct 23
 
Multi-part MIDI Arpeggiator.
Notes: Second-generation version of the 'noodler' device from Conductive Labs, the NDLR v2 aims to simplify music theory and unlock creative ideas, making it easy to create and perform arpeggios, drones, chords and other patterns. Hook up to your synths and software over MIDI, USB or analogue clock.

Supplier's notes:

Conductive Labs have turned complex music theory into a killer synthesizer jamming MIDI controller. With four parts that can play up to 8 synths, you can make fantastic electronic music, such as soundscapes, electronica, ambient, electro, or techno to name a few. Whether noodling in your music space after work or jamming with friends, The NDLR can take your music to amazing places!

Press one of the seven chord buttons, and the two arpeggiators and drone follow the chord notes while your polyphonic synth sings with pads.

There are start and stop buttons for each of the four parts, and a button to start/stop all parts. And there's a "panic" button to stop all MIDI notes.

A colour LCD screen shows you everything that's going on. A very flat menu structure keeps menu diving to a minimum.

Pick a key, a mode and control the BPM of The NDLR's MIDI clock.

With two sets of 5 pin DIN MIDI inputs and outputs, and four USB MIDI virtual ports you have lots of ways to connect your MIDI devices. There is also CV clock in and out connectors to sync with your Korg Volcas, modular or semi modular synths.

It works with MIDI hardware synths, and your DAW or tablet, if that's your thing.

Once you master the basics, dive into the 8x modulation matrix. It lets you animate most of The NDLR's parameters. You can even send LFOs to your MIDI gear.

The NDLR includes a Pattern editor to make arp and modulation patterns, a rhythm editor and now a Chord Sequencer too! Once you have your perfect piece, you can save your patches.

What's new in The NDLR (v2)?
By popular demand, a soft-power button has added. The NDLR (v2) is powder coated with a black faceplate and beautiful red base. And the internals were modified for a new, faster microcontroller. The feature set remains the same, though there are some surprises waiting to be discovered in the menus. So far, new features are being back ported to the original The NDLR via firmware updates, as long as it does not require the faster processor.

The Four Parts


The PAD part is a polyphonic chord player for getting beautiful PADs out of your favourite poly synth. Like all of the other parts, the PAD plays notes based on the selected global chord. When you press a chord button the notes stay on until you press the next chord or stop the part, so you can twist knobs on your synths or play a lead part on guitar. Change or modulate the chord octave position, note range, spread, and strum.

A really cool feature of the PAD part is the "Interleaved Poly-Chain". When enabled, this will send the chord notes to up to 4 MIDI channels in a round robin fashion. Really great for ethereal evolving patches on a multi-timbral synth, or for turning multiple mono-synths into a poly synth! Six voices from 2 Volca FMs? Sure!

There are two "Motifs" which are extremely versatile sequenced arpeggiators. Select a pattern for each one and press Play! Independently tweak on clock division, pattern length, octave position and more. You can create your own patterns with the onboard pattern editor, and add rhythm with the onboard Rhythm editor. The motifs play the notes contained in the currently selected chord, so you don't need to pick notes on a keyboard. The NDLR supports a 10 to 300 BPM clock so play as fast or slow as you like, or use an external clock source.

The Drone part can play a single continuous note like a traditional drone does... or choose from various retrigging options, such as having the note retrigger on a chord change, the down beat, every beat, up beat, etc. You can also choose to add a 3rd and/or 5th note to the root note for a polyphonic drone. Or have the drone play a thundering kick drum if you want to.

Hardware

Requirements:

USB Power Supply not included; The NDLR (v2) runs on 5V DC, 140mA. The original is 90mA.
The NDLR comes with a 6 foot USB cable. You can purchase longer or shorter cables as needed, with USB A to USB B connectors. Users of newer Macs may need to purchase a USB B to USB C cable or use an adapter.
MIDI Synthesizer(s); The NDLR is a MIDI playing device, it doesn't make any sound on its own, it sends MIDI messages to your MIDI sound modules. It can play most anything with MIDI input including vintage synths, modern synths, mono and polyphonic synths, software synthesizers, on an iPad, PC, stand-alone or VSTs in a DAW. Note that some vintage synths or synths with poor MIDI implementations may be prone to getting stuck notes. Use the Panic button on The NDLR when needed.
To connect many synths, and for the best MIDI timing we recommend using an active, 1 input to 4 or more outputs MIDI thru device or MIDI router, such as the MRCC.
The NDLR has rich velocity controls if your synths support velocity, not all do.
The NDLR can be controlled with an external MIDI controller or sequencer. See The NDLR Setup Examples in The NDLR User Manual for details.

Physical Layout:
Dims: Size 9"W x 6.3"L x 2.8?H (22.8 x 16 x 7.1cm)
Color LCD Screen 1.8" (128×160)
8 Rotary Encoders w/ switch
7 Chord Buttons (degree / type)
4 Play/Pause Buttons (PAD, Drone, Motif 1, Motif 2)
Motif 1 or Motif 2 Select
Global Play/Stop Button
Shift & Menu Buttons
Recessed Firmware Update Button (upgrades via USB)

Physical Input/Output:
2x MIDI 5-Pin Inputs
2x MIDI 5-Pin Outputs
1x USB w/ 4 Virtual USB MIDI I/O ports + Power
1x Clock Out 1/8th inch jack
1x Clock In 1/8th inch jack
Limited Warranty:
The NDLR comes with a limited warranty to the original owner for 1 year (or the minimum time required by law in your country) from the time you received it.
Consumables, such as the USB cable and accessories have a 90 day limited warranty.

MIDI

MIDI-in Options:
Connect a MIDI keyboard or sequencer and The NDLR selectable transpose MIDI channel to transpose from the key of "C" to the current NDLR key & mode.
Use a MIDI keyboard or sequencer to select chords. Choose The NDLR "Control-In" MIDI channel. The white keys map to chord degrees I-VII. Optionally black keys map to the chord type. Sonority is automatic based on key & mode.
Most features of The NDLR can be controlled by inbound CC messages.
All notes and CCs pass thru except for The NDLR control channel.
With 2 MIDI 5 pin and 4 USB MIDI in and outs, The NDLR is a MIDI merger and a MIDI splitter. See the manual for details.
MIDI-out Options:
Selectable Drone MIDI-out channel (Off, Pad, 1-16). Pad choice means same as Pad channel.
Selectable Pad MIDI-out channel (1-16). Poly-chains play on next successive MIDI-out channel(s). Example: Pad MIDI-out ch = 4. Polychain = 1 - all pad notes on ch 4. Polychain = 2 - every two notes plays on channels 4/5. Polychain = 4 - every 4 notes plays on channels 4/5/6/7. If you are playing 6 notes with Polychain = 2, note1->ch4, note2->ch5, note3->ch4, note4->ch5, note5->ch4, etc.
Selectable Motif 1 MIDI-out port and channel.
Selectable Motif 2 MIDI-out port and channel.
MIDI out ports are USB 1 thru 4, and 5 pin din MIDI A and MIDI B.
Read more
 1 in stock $390.72
Click for better price!
or call +44 20 7424 1960
quote 968112
15
Hexinverter Mutant Machine Analogue Percussion Module
Hexinverter Mutant Machine Analogue Percussion Module (drum/clock generator/envelope generator/noise/oscillator/synth voice module)
Cat: 995966 Rel: 06 Feb 24
 
Analogue percussion module - 22HP
Notes: A unique analogue percussion module, based on principles from the legendary 909 twisted into new sonic territory. Capable of everything from classic kicks and snares to more experimental hits and complex VCO effects.

Supplier's Notes:
A machine is born

The Machine began as a quest to create a rich-sounding eurorack snare drum synthesis module to complement the existing Mutant Drums. The project quickly became too large and costly to justify the module being capable only of snare drum sounds. So, the decision was made to learn from the architecture of the TR-909's snare and kick circuits, in order to develop a module capable of generating multiple forms of analogue percussion, and various other effects.

Like the other Mutant Drums, the Machine has its roots in classic analogue percussion synthesis. Even though it can create totally alien sounds, it still has the capability to deliver those classic 909 house snares and kicks if you want them. There are no microcontrollers in the Machine. The signals and waveforms are all generated by discrete components and ICs, for a distinctly analogue sound, and user experience.

Features

Microcontroller-free analogue percussion synthesis engine
Unique Inverter Core oscillators form the MEMBRANE. Each analogue oscillator has three waveforms to select from
Capable of synthesizing everything from heavy-hitting bassdrums to classic 909-style snares and other complex timbres
Modular design gives the Machine many auxiliary purposes, great for modular sound design of many varieties, and not just percussion
The SNAPPY section is comprised of a voltage controlled noise oscillator, for modelling the noisy part of drum timbres
Both MEMBRANE and SNAPPY elements have an external input for replacing the built-in sound sources, opening up many avenues of possibility
13 control voltage and audio inputs, for a fully modular drum experience
7 audio and CV/gate outputs for maximum integration with other modules
Dedicated outputs for each WAVE and NOISE oscillator mean you can use the Machine as a complex VCO in your system, when not synthesizing percussion
Waveform scanning feature generates complex timbres from analog waveforms
The MEMBRANE's waveforms can be scanned through automatically by the wavescanner's voltage controlled clock generator, or an external clock or VCO can be used
SCAN FREQ CV forms a unique form of timbre control, making the Machine act like a complex oscillator at its WAVES output
The ENABLE input allows you to gate the wavescanner on and off with a CV or gate signal

Technical specifications

Width: 29HP | Depth: 30mm
Current draw: +139mA, -115mA @ 12V
Read more
 2 in stock $335.80
Click for better price!
or call +44 20 7424 1960
quote 995966
16
Rode RODECaster Duo Integrated Audio Production Studio
Rode RODECaster Duo Integrated Audio Production Studio (integrated audio production studio)
Cat: 944724 Rel: 29 Jun 23
 
Compact integrated audio production studio for podcasters, streamers and content creators.
Notes: Compact and user-friendly all-in-one production studio from Rode's excellent RodeCaster series. Aimed at podcasters and content creators, the RodeCaster Duo makes it easy to achieve great results.

Supplier's Notes:
The RODECaster Duo is the ultimate compact audio solution for podcasters and content creators. Combining revolutionary features with superior sound quality, endless customisability and unmatched ease of use, the RODECaster Duo is all you will ever need to record incredible audio for your content.

Everything You Need to Sound Spectacular

The RODECaster Duo is the world's most powerful all-in-one audio production solution. Condensing a complete professional broadcast studio into a compact and intuitive console, it gives you everything you need to sound spectacular, whether you're podcasting, streaming or creating any kind of content. Loaded with cutting-edge next-gen features and supercharged by a high-performance quad-core audio engine, this is all you need to produce exceptional content.
Incredible Audio, Incredibly Easy

The RODECaster Duo is incredibly simple to navigate with its large high-definition touchscreen, tactile rotary encoder and broadcast-quality faders giving you hands-on control over every aspect of your sound. Get your project set up in seconds, and with professionally tailored presets and our intuitive VoxLab™ processing editor, you can dial in your perfect sound with the tap of button or twist of a knob. It's never been easier to create amazing content.
Revolutionary Sound

The RODECaster Duo features world-class Revolution Preamps that deliver pristine audio quality with any microphone, instrument, headset or line-level source. Designed from the ground up specifically for the RODECaster series, these ultra-low-noise, high-gain preamps will give you plenty of output while remaining incredibly quiet, eliminating the need for microphone boosters, lifters or external processing

Professional Processing, Powered by APHEX

Craft your sound with studio-quality audio processing powered by one of the most revered names in pro audio: APHEX. On-board is a suite of authentic emulations of legendary hardware audio processors, including the Aural Exciter, Big Bottom and Compellor master compressor/leveller. There is also a studio-quality compressor, noise gate, high-pass filter, de-esser and three-band equaliser for each channel. Sound exceptional every time you hit record.

Super Compact, Highly Portable

The RODECaster Duo is incredibly versatile and powerful, but it's also exceptionally compact and portable. Take your podcast on the road, create content from home or the office or simply liberate some desk space to keep your livestream looking clean.
Customise To Your Creative Flow

No matter what kind of content you're creating, the RODECaster Duo can be configured to perfectly suit your workflow. Assign the eight inputs to any of the physical or virtual faders to suit your setup, customise the effects and processing for each channel, and transform the RODECaster Duo into your own personalised studio.
Take Creative Control with SMART Pads

The RODECaster Duo features six programmable SMART pads that give you huge creative control at your fingertips. Trigger sounds, music beds, or on-the-fly voice effects like reverb, echo, pitch and robot FX, send MIDI commands to external software, activate automated mixer actions like fade-ins and fade-outs, and so much more.

Connect Any Audio Device

No matter what your setup looks like, the RODECaster Duo offers complete flexibility when it comes to connectivity, making it the perfect control centre for your audio productions. It features two USB interfaces for dual computer setups, an MFi-certified USB port that works seamlessly with iOS devices, and you can record ultra-high-quality phone calls or stream audio in high-definition via the advanced Bluetooth connection.

Key Features:

Fully integrated audio production studio for podcasters and content creators
Ultra-low-noise, high-gain Revolution Preamps (-131.5dBV EIN, 76dB gain)
Two high-quality Neutrik combo inputs for connecting microphones, instruments or line-level devices
Seven individually assignable channels with four broadcast-quality physical faders and three virtual faders
Integrated wireless receiver for connecting RODE Series IV wireless devices (including the Wireless GO II and Wireless ME)
High-performance quad-core audio engine
Studio-grade APHEX audio processing and on-board effects
Six fully programmable SMART pads with bank switching
3.5mm TRRS input for connecting headphones and headsets
Dual USB-C interfaces for connecting two computers or mobile devices
Advanced Bluetooth connectivity for high-quality phone call integration
Designed and made in RODE's state-of-the-art facilities in Sydney, Australia

Specifications

Acoustic, Video & Electrical
Frequency Range: Mic Inputs: 20Hz - 20kHz, Monitor Outputs: 20Hz - 20kHz
Microphone Input Impedance: 4KO
Instrument Input Impedance: 1MO
Preamplifier Gain Range: 0 - 76dB
Equivalent Noise: -131.5dBV (A-weighted)
Line Output Maximum Level: 4dBu
Headphone Output Power: 250mW
Power Requirements: USB-C PD (9V, 3A)
Analogue Audio Output Connectivity: 2 x combo jack (mic, instrument, line), 1 x 3.5 TRRS headset jack (I/O)
USB Interface 1: 1 x 2-in/14-out multichannel device, 1 x 2-in/2-out with mix-minus
USB Interface 2: 1 x 2-in/2-out with mix-minus
Bit Depth: 24-bit
Sample Rate: 48kHz
Recording Storage: microSDHC, microSDXC, USB-C removable drive (exFAT - minimum 100MB/s)
Data Transfer: USB 3.0 SD card reader 130MB/s
Network Connectivity: WiFi 802.11g/n/ac 2.4GHz and 5GHz, Ethernet 100/100
Internal Storage (GB): 4GB (SMART pads)
OS Requirements: macOS 10.15 or later, Windows 10 Version 1803 or later, Windows 11

Mehcanical:

Weight (grams): 1131
Dimensions (millimetres): Length: 235, Width: 225, Height: 76

What's in the box:

1 x RODECaster Duo, 1 x USB-C to USB-C cable (1.5m), 1 x power supply
Read more
MRP:$526.94 SAVE 15%
 6 in stock $447.74
17
Torso Electronics T-1 16-Track Algorithmic Sequencer (black)
Cat: 832903 Rel: 15 Jan 24
 
16-track algorithmic sequencer
Notes: One of the most eagerly anticipated new releases in recent years, the T-1 is a powerful 16-track sequencer with countless features aiming to streamline creativity, from melody generation to Euclidean rhythms.

Supplier's Notes:
Not your average sequencer
A 16 track algorithmic sequencer at the center of your studio. The T-1 offers a generative workflow with focus on immediacy and playful exploration. Whether on stage or in the studio, the T-1 will inspire you with fresh ideas and help you push the boundaries of your music. In short, this is a fundamental rethinking of the sequencer as a modern, fun and inspiring instrument

This machine speaks music
Enter a creative dialogue with T-1, and let its musical algorithms spark your creative process, or bring it on stage to perform your musical ideas live and spice them up with variations created on-the-fly

It's your instrument
The T-1 can be customized to suit your music. In fact, it is many instruments in one: Each of the T-1's 16 tracks can be set up in one of three modes.
Note: Compose rhythms and melodies from scratch with creative musical algorithms, and tweak them to your desire with detailed step editing.
CC: Take absolute control over sound design with 16 CC knobs and add automation via random modulation and step editing
FX: Create real-time midi fx to expand and transform your musical ideas. Connect a midi keyboard for hands on live performance

Connect to everything
The signal flow of any modern studio is a complex web of analog, digital and wireless signals and keeping your instruments connected and in sync can be a drain for your creativity. The T-1 solves this by communicating via MIDI, USB, analog CV and gates, Ableton Link and Wi-Fi connections with all of your gear.

Musical structure in a knob
Sculpt the timing, tonality and overall structure of your music in the same intuitive way you would a parameter on a synthesizer: By the twist of a knob. The T-1 lets you dial in any rhythm in a manner of seconds with euclidean rhythms.
Want to surprise your audience and even yourself? Add a bit of random modulation or change the probability of a step being played or not. Try the T-1 style looping random modulator

Tangible visuals
What you see is what you get: at every touch of a knob or push of a button, 16 RGB buttons show you the state of the instrument while offering up a quick way to jump to a new setting in real-time

Performing is composing
The T-1 is an instrument designed to be played in the here and now. Whether you are working in a studio or on stage, the path between musical inspiration and performance has never been shorter.
Make relative parameter changes on one or multiple tracks simultaneously, save the changes or return to the starting point. With the T-1, your music making process is a constantly evolving flow

Technical specifications

Sequencer
Euclidean rhythm generator (w. step editing)
Advanced note repeater / arpeggiator
Melody generator
7 musical scales + 1 user scale per track
Harmonic pitch control
Random modulation on every parameter

Tracks
16 tracks per pattern
16 MIDI channels
Polyphony on every track

Storage
Auto-save
16 patterns per bank
16 banks

User interface
18 endless rotary encoders with push
23 RGB backlit silicone keypads

Physical
Matte black aluminium casing
Dimensions: L:304, W:114, H:39mm ?(11.9", 4.5", 1.5")
Weight: 815g (1.8 lbs)

In the box
1 x T-1
1 x USB cable
1 x MIDI adapter (type A)

Connectivity
USB C (midi/power)
MIDI in / out / thru (TRS type A)
CV & gate i/o
Ableton Link (WiFi)
Read more
 3 in stock $527.99
18
Chord 6.3mm TRS Jack Plug To 6.3mm TRS Jack Plug Audio Cable (3.0m)
Cat: 444521 Rel: 05 Jan 12
 
1/4" TRS jack audio cable, male to male
Notes: The Chord cable lead is the high quality audio lead for exceptional sound quality and reliability. The high grade cable comprises 2 insulated pure copper cores and global shielding. The durable PVC sheath has a soft texture and is reinforced with cotton cord to avoid tangling. Each end is terminated with a pro-quality 6.3mm stereo (TRS) jack plug.

Read more
MRP:$5.28 SAVE 15%
! low stock $4.49
19
Buchla & TipTop Audio Dual Oscillator Model 258t Module
Buchla & TipTop Audio Dual Oscillator Model 258t Module (dual & stereo/oscillator synth module)
Cat: 846759 Rel: 07 Mar 22
 
Dual oscillator module
Notes: Best value Buchla module ever? An official Buchla module produced by TipTop Audio, the 258t is a dual triangle-core oscillator, with sine/sawtooth wave shapes in the top half and sine/square at the bottom. Bags of character.

Supplier's Notes:
Two independent voltage-controlled oscillators. Each has one processing input, a frequency modulation input and a 1V/oct input.

Waveshapes, as well as frequency, can be voltage controlled. Model 258 oscillators feature low sine wave harmonic content, negligible settling error, and high short and long-term stability, even with rapidly changing ambient temperatures.

Trimmers:

There are three trimmers for each oscillator on the back of the module:

1V/oct is the octave tracking trimmer and is set at the factory using high precision instruments.
SHAPE is the trimmer that set the sine wave, for the lower harmonic content of the sine wave.
VC WAVE SHAPE sets the response of the waveshaper to the incoming control voltage. Both SHAPE and VC WAVE SHAPE trimmers are used to adjust the sine wave purity.

Size: 18HP
Depth: 45mm
Power: +12V 70mA / -12V 40mA
Read more
 2 in stock $177.40
20
Doepfer A-124 VCF5 Wasp Filter 12dB Multimode Filter Module (special edition, black/yellow)
Cat: 671564 Rel: 29 Nov 17
 
12dB multi-mode filter with unique classic circuitry, based on the filter from the 70s EDP Wasp synth
Notes: Module A-124 is a special 12dB multimode filter using the "strange" filter circuit of the "EDP Wasp" (an analog synthesizer with black/yellow case built end of the seventies, manufactured by the UK company "Electronic Dream Plant" with Chris Huggett und Adrian Wagner). This design "abuses" digital inverters as analog operational amplifiers leading to distortions and other "dirty" effects that generate the specific sound of this filter. The filter is equipped with a band pass output and a combined low/notch/high pass output. For this output a control knob defines the relation between low and high pass signal. If both signals appear at the same level (i.e. middle position of the Mix knob) one obtains a notch filter. Otherwise the low or high pass signal predominates. The module does not feature self-oscillation in contrast to most of the other filters of the A-100 system.

Inputs: Audio In, CV In (2x)
Outputs: Bandpass Out, Low/Highpass Mix-Out
Controls: Audio and CV attenuator, Frequency, Resonance, LP/HP Mix

The function and operation of this module is very similar to the module SEM VCF A-106-5. But the sound of both filters is very different! The only functional difference is the position of the sockets and controls, and the function of the controls CV2 (A-124: normal attenuator, A-106-5: polarizer).

- 3U Eurorack module, 8HP wide, 45mm deep
- Current draw 30mA
Read more
MRP:$88.70 SAVE 10%
 3 in stock $80.25
Click for better price!
or call +44 20 7424 1960
quote 671564
21
UDG Ultimate Headphone 3.5mm To 6.35mm Jack Adapter Screw (single, gold)
Cat: 927743 Rel: 23 Feb 23
 
Headphone jack adapter screw 3.5mm (1/8") to 6.35mm (1/4").
Notes: The UDG Ultimate Headphone Jack Adapter Screw 3.5mm (1/8") to 6.35mm (1/4") connects your headphone's mini-jack plug to a larger stereo jack output. It has a grippy surface to help you grab hold of it. The gold-plated adapter provides a solid connection without compromising sound quality.

Specifications

Colour: Gold
Weight: 0,01 kg
Outer Dimensions (W x H x D): 4.5 x 1.0 x 1.0 cm | 1.77 x 0.39 x 0.39 inch
Inner Dimensions (W x H x D): Not Applicable
Material: Metal
Protection: Gold-plated contacts
Adapter Stereo Mini Jack F / Stereo Jack M (Screw-in)
Nice grippy surface to help you grab hold of it

Extras

High-end realisation
Stereo jack adapter - 3.5mm (1/8 inch) mini jack socket stereo - 6.35mm (1/4 inch) jack plug stereo

Fits: Fits correctly on most headphones - Just screw and play
Please note that this 3.5mm female ports only compatible the 3.5mm male cable with screw threaded
Read more
 3 in stock $6.32
22
Sonicware Liven Texture Lab Granular Synthesiser With Granular Effects Processor
Cat: 945971 Rel: 01 Jun 23
 
Granular synthesiser with granular effects processor and 128-step sequencer.
Notes: Part of Sonicware's Liven groovebox series, this time focussing on granular synthesis and effects processing. 128-step sequencer and shimmer reverb allow you to create grooves.

Supplier's Notes:
Sample, slice, transform and reconstruct audio to synthesize completely new sounds

The LIVEN Texture Lab offers a wide variety of sound textures ranging from beautifully lush ambient pads to chaotically aggressive experimental noise that will take you to new sonic frontiers.

The Texture Lab uses a granular processor that slices sounds into grains ranging from 2 ms to 1 second in length, then transforms and reconstructs them in a variety of ways, including manipulating grain shape, density, time warp, spatial position, and playback method to create entirely new sounds.

Granular synthesis parameters are easily accessed from 10 knobs and are designed for intuitive control

Granular synthesizer with granular effects processor mode

The LIVEN Texture Lab is a 4-voice polyphonic synthesizer that can record 32 samples of up to 6 seconds, generate grains from any part of a sample, and synthesize them using two modulations sources, an envelope generator, and process the sound through different filter types.

The Texture Lab can also be used as an effects processor for real-time granular processing of stereo signals from the line input. It is also possible to freeze the flowing sounds for 6 seconds to add granulated sound effects.

Shimmer reverb for fantastical and majestic sounding spaces

The LIVEN Texture Lab features six high-quality stereo reverb types. All reverb types have a shimmer parameter that allows you to layer reverb on top of reverb in octaves to create fantastical and majestic sounding spaces.

128-step sequencer with parameter locking

The LIVEN Texture Lab is equipped with a high-performance 128-step sequencer that has earned the LIVEN series a solid reputation. In addition to recording notes, it can also record changes in granular processing parameters over time.

You can record knob operations in real time or directly record parameters to specific steps allowing for more complex sound textures.

Specifications

[Granular processor]

Synthesizer mode
- Sampling up to 6 seconds per sample (16bit - 32kHz mono, Start/end point adjustment)
- Auto start sampling function with the input level (input level can be set)
- Internal resampling function
- 32 sample memory slots

Effects processor mode
- Real-time processing of stereo signals from the line inputs
- Freeze function


- Pitch: Pitch of the sample (i2 octaves)
- Position, Length/FB: The sample range for generating grains (with random position function)
- Speed, Direction: Playback speed, scan direction, and playback direction of the grains.
- Size, Shape: Size and shape of the grains (with random function)
- Timing, Jitter: Interval of generating grains (with our original LUSH setting)
- Density: Number of the grains (up to 64 grains in legato mode)
- Diffusion: Diffusion width of the grains
- Blend: Balance between the sample and the granular sound mix
- Modulation 1: LFO assignable to various parameters (with wave shape selection, start fade-in time, retrigger, and tempo sync)
- Modulation 2: LFO assignable to various parameters (with wave shape selection, retrigger, and tempo sync)


- Attack
- Release


- Low Pass
- High Pass
- Band Pass

Reverb effects
6 high-quality reverbs with Shimmer reverb parameters
- Hall
- Room
- Arena
- Plate
- Tunnel
- Infinity


- 4-note polyphonic mode (Up to 16 grains per voice, internal sequencer records up to 3 voices of polyphony)
- Mono mode (Up to 32 grains, adjustable glide time)
- Legato mode (Up to 64 grains, adjustable glide time)
- Arpeggiator modes (Up, Down, UpDown, DownUp, Up&Down, Down&Up, Up+1, Up+2, Down-1, Down-2, Random, Play Order)

[Sequencer]
- 1 track
- Up to 128 steps per pattern
- 128 patterns
- Step length can be set from 1/1 to 1/32
- Real-time recording
- Directly enter notes for each step when sequencer is on or off
- Enter longer notes (Tied notes)
- Metronome and pre-count function
- Undo/Redo function
- Transpose function
- Swing function
- Pattern BPM / Global BPM can be set
- Pattern chain function
- Parameter Lock function to record parameter settings for each step
- RANDOM function to play back steps in random order
- STUTTER function to play back only the step being pressed

[MIDI]
- Notes, control changes, clock input/output
- IMPORT/EXPORT of user data (Including samples) via Sysex
- Firmware update via Sysex

[Unit]

27 keys (with a hold function)


- 15 physical control knobs
- Optional LATCH function prevents jumps in value when knob position and parameter values do not match.
- One physical encoder for fine adjustments.
- LCD dot indicates when a parameter value matches the saved value, or when the value has been changed.

Read more
MRP:$294.62 SAVE 15%
 2 in stock $249.21
23
Dreadbox Typhon Monophonic Analogue Desktop Synthesiser
Cat: 809378 Rel: 20 Jan 21
 
Monophonic analogue synthesiser
Notes: Typhon has been developed with ultimate care and love, so as to be a great-sounding, portable and affordable synthesizer. It has a complex modulation routing, 256 preset memory, a 32 note sequencer, and powerful stereo effects developed by Sinevibes.

Since it is packed in a compact USB powered box, it can be carried everywhere you go!

Specifications & Connections:

USB powered (at least 500mA)
60 Playing hours with 20,000mA portable power bank
MIDI Din IN and OUT
1/4 in Stereo Out
1/8 in Headphone Out
1/8 in Mono Audio In (for routing via Typhon FX)

Dimensions: 23 x 13 x 6 cm
Weight: 1kg
Read more
MRP:$396.00 SAVE 19%
 6 in stock $322.11
24
ALM Pamela's PRO Workout Clocking Modulator Module
ALM Pamela's PRO Workout Clocking Modulator Module (clock generator/clock modulator/function generator/LFO/sequencer/digital/quantizer/random synth module)
Cat: 911097 Rel: 18 Nov 22
 
'Pamela's PRO Workout' is a compact programmable clocked modulation source for your Eurorack modular system.
Notes: 'Pamela's PRO Workout' is a compact programmable clocked modulation source for your Eurorack modular system. It provides 8 highly editable outputs producing various control voltage signals correlated and synced to a BPM based master clock.

Each output can provide everything from simple clocked triggers, complex rhythmic waveforms, quantised melodic patterns to random chaos with direct and assignable CV control over numerous parameters. These features together with a quick and easy to use interface provide almost limitless synced modulation possibilities in a tiny space.

Building on the original 'Pamela's Workout' & 'Pamela's NEW Workout' the evolved 'PRO' Pam maintains the precursor's form factor and intuitive workflow but improves and adds many new features with upgraded hardware, more CV inputs, a new full colour hi res display and rewritten software adding many new enhancements like micro grid timings and cross output modulations.

Through optional expander modules more CV input and outputs can be added with support for external non euro equipment through Midi and Din Sync outputs. Please enjoy your next generation PRO workout!

Size: 8HP
Power: +12v 60ma / -12v 10ma
Depth: 32mm (approx with power header)
Outputs: 0-5v buffered low impedance. 12 bit res. 3.8khz max update freq.
Inputs: CV 0v-5v / Clock, Run - rising edge 700mV min.
Read more
 5 in stock $272.44
Click for better price!
or call +44 20 7424 1960
quote 911097
25
Dreadbox Eudemonia Filter-Mixer-VCA Module
Cat: 809393 Rel: 20 Jan 21
 
Filter/mixer/VCA eurorack module
Notes: The compact and complete VCA. Filtering and mixing rolled into one powerful unit. The Dreadbox Eudemonia Filter is an analog wave generator processor. It provides accurate mixing capabilities and features a dual filter in series. The filters are a 24dB resonant Low Pass Filter and an 18dB non-resonant High Pass Filter - these allow you to shape your sound before sending to your output. In order to keep things in line, the exponential VCA has a peak indicator to help you reference your levels.

Power Consumption: 61mA @ +12V , 69mA @ -12V
61 mA +12V
69 mA -12V
35 mm deep
10HP
Read more
MRP:$100.32 SAVE 19%
 2 in stock $81.60
26
Nu-X ADC-006A Adaptor For Effect Pedals (9Vdc - 500mA)
Cat: 812918 Rel: 10 Feb 21
 
Power adapter for effects pedals
Notes: Mains switch-mode power adaptor to operate 9Vdc effect pedals up to 500mA (polarity is pin-negative)

Suitable for NuX effect pedals and most other brands

The box for this item contains :

9Vdc 500mA adaptor

Specifications:
Power supply: 100-240Vac, 50/60Hz
Output voltage: 9Vdc
Output current max.: 500mA
Polarity: Pin-negative
Dimensions: 90 x 80 x 60mm
Connector: DC jack 5.5 x 2.1mm
Weight: 90g
Read more
 1 in stock $10.04
27
Neo d+ XFR Class B - XLR (female) To RCA (male) Audio Cable (3.0m, pair)
Cat: 509722 Rel: 16 Feb 15
 
High quality Class B audio cable - dual XLR - dual RCA (3m)
Notes: d+ series bring the highest quality and a cool designed in your sound system such as DJ gears, audio interface, speaker, mixer, effector, synthesizer and all sound gears.

About the product planning for the d+ series, we contemplated the best combination of materials and the structure for today's music and situations.

You might already have seen d+ class B series somewhere. That's why they always have a desire to improve the sound quality and the cable's transmission influences the total sounds.

Many professionals are using the d+ series and you can easily get the goodness on your sound system.
Read more
 1 in stock $36.70
28
Adastra Studio Rack Fixing Kit With Nuts Bolts & Plastic Washers (20 piece set)
Cat: 491470 Rel: 09 May 13
 
20 piece set consisting of M6 captive nuts, bolts and plastic washers for fixing equipment to standard rack strip
 1 in stock $3.16
29
MIDI Solutions Merger V2 2-Input MIDI Merger
Cat: 524233 Rel: 13 Mar 14
 
Compact 2 in 2 out MIDI merger
Notes: The MIDI Solutions Merger is a 2-in 2-out MIDI Merger. All MIDI messages appearing at the two inputs are merged to the outputs (including System Exclusive, MIDI Clock, and MIDI Time Code messages). A fast merging algorithm ensures that all MIDI data is processed accurately with the minimal possible delay.

The Merger is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.
Read more
 3 in stock $88.44
Click for better price!
or call +44 20 7424 1960
quote 524233
30
ALM Custom 3.5mm Male Mono Patch Cables (30cm, red, pack of 5)
Cat: 801498 Rel: 20 Nov 20
 
Pack of 5 3.5mm patch cables
Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.
Read more
 1 in stock $8.45
31
ALM Custom 3.5mm Male Mono Patch Cables (30cm, green, pack of 5)
Cat: 801503 Rel: 20 Nov 20
 
Pack of 3.5mm green patch cables
Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.
Read more
 1 in stock $11.89
32
Decksaver Empress Effects Zoia Dust Cover
Cat: 801888 Rel: 21 Dec 20
 
Polycarbonate shell cover for Empress Effects Zoia Effects Pedal
Notes: Custom engineered in the UK for the Empress Effects Zoia Effects Pedal, Decksaver's super durable polycarbonate shell protects against dust, liquid and accidental impact. Precision trimmed for an exact fit whilst accommodating cables, your MPC can sit ready for operation. Slides straight into a flight case or bag ready for transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.
Read more
MRP:$31.68 SAVE 29%
 2 in stock $22.44
33
AJH Synth Wave Swarm Dual 6 Stage Wave Animators Module (black)
AJH Synth Wave Swarm Dual 6 Stage Wave Animators Module (black) (dual/stereo/effect/waveshaper synth module)
Cat: 688824 Rel: 01 Aug 18
 
Analogue waveform animator & dual channel device - black, 14HP
Notes: The WaveSwarm is a waveform animator and all analogue dual channel device.

Each channel simulates up to six VCO's beating in unison with a different beat frequency between each animation. The fixed beat frequencies are generated by twelve onboard LFO's, and the front panel pots control the level of each of the six animators, along with the level of the dry signal to the final mix. In addition to independent channel inputs and outputs it also has an A+B output, which sums the outputs of the two channels, creating an effect similar to twelve VCO's in unison! This is possible because channel B uses slightly different beat frequencies to channel A, they are not identical.

The input waveform can be saw, triangle, sine or wavetable/complex waveforms, in fact most waveforms with the exception of square or PWM waves will give some form of animation.

A soft clip circuit is built in so that at higher signal levels the signal magnitude is limited by rounding the top and bottom of the waveforms, thus slightly softening the sound. There are soft clip LED indicators for both channels.

It can produce huge, fat drones or supersaw type waveforms from a single sawtooth or triangle wave input.
Read more
 1 in stock $273.50
34
Befaco 80cm Patch Cables (red, pack of 4)
Cat: 668658 Rel: 09 Nov 17
 
4 x high quality red patch cables
Notes: Pack of high Quality patch cables. Not too stiff, not too loose!

One colour for each size make Befaco patch cables just perfect to keep them organized!

This pack contains 4 high quality red patch cables.
Read more
MRP:$12.67 SAVE 21%
 2 in stock $10.04
35
Chord 6.3mm TRS Jack Plug To XLR Male Audio Cable (3.0m)
Cat: 673454 Rel: 15 Dec 17
 
6.3mm (1/4") TRS jack connector to male XLR connector cable, 3m
Notes: High quality audio leads for exceptional sound quality and reliability. High grade cable comprises an insulated pure copper core and global shielding.

The durable PVC sheath has a soft texture and is reinforced with cotton cord to avoid tangling. Terminated at one end with a 6.3mm stereo (TRS) jack plug and at the other end with a male XLR connector.
Read more
MRP:$6.34 SAVE 29%
 5 in stock $4.49
36
Intellijel Mixup Chainable Mono & Stereo Audio Utility Mixer Module
Intellijel Mixup Chainable Mono & Stereo Audio Utility Mixer Module (attenuator/mixer/multiple/utility/dual/stereo synth module)
Cat: 673868 Rel: 12 Jan 18
 
Versatile audio mixer module - 6HP
Notes: Mixup is a versatile, expandable audio mixer for Eurorack format. It has eight inputs (6 on the front panel) and two outputs. Inputs 1 and 2 are single-channel mono inputs, each with its own mute switch and level control; Input 3 is a dual-channel stereo input with a shared mute and level control; and input 4 is an auxiliary unity-gain, non-mutable stereo input.

Using bus connectors on the back panel, you can chain multiple Mixups together in series, giving you the ability to mix together even more inputs, or to create sub-mixes for routing around larger systems.

Because Mixup is designed specifically for audio (and not for CV mixing), it uses AC-coupled circuitry (which reduces the potential for 'pops' when muting and unmuting audio), and it uses audio-grade, logarithmic attenuators for a smooth, even response across the entire volume range.
Read more
 4 in stock $89.76
Click for better price!
or call +44 20 7424 1960
quote 673868
37
4ms Pod32 32HP Powered Synth Module Enclosure Case
Cat: 706840 Rel: 12 Dec 18
 
32HP metal enclosure for Eurorack modules with built-in power supply
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod32 is 32HP with 1.34" (34mm) of available module depth. The built-in power supply has two power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod32 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.
Read more
 1 in stock $119.32
Click for better price!
or call +44 20 7424 1960
quote 706840
38
AJH Synth Next Phase 12-Stage Analogue Multi-Tap Stereo Phaser Module (black)
Cat: 708079 Rel: 22 Jan 19
 
12 stage multi tap stereo phaser - black, 18HP
Notes: The next generation 12 stage, analogue multi tap Phaser, which is a development of, and replacement for, our earlier MegaPhase 12 unit. It includes all the features of the MegaPhase 12 and is also built around the circuitry of the superb sounding EH Smallstone Phaser, which was used to such great effect on synthesisers and string machines by J M Jarre on his early albums. It has the same versatile Stage and Emphasis stage switching, and the same configuration of stereo outputs, where the left channel is taken from the Stage switch, and the Right output from the Emphasis Stage Switch.

New features include independent Level Controls for Input 1 and Input 2, and a Phase "Colour" Control, which can lighten or darken the phasing effect. We have also used much lower noise internal VCA's and low noise audio op-amps along with a four layer PCB design, so that the S/N ratio is improved and the noise floor is considerably reduced compared with the previous MegaPhase 12 phaser. Like its predecessor it occupies 18HP of Eurorack space.
Read more
MRP:$401.28 SAVE 11%
 1 in stock $357.97
39
Decksaver Tiptop Audio Mantis Dust Cover
Decksaver Tiptop Audio Mantis Dust Cover (modular synthesiser case dust cover)
Cat: 708789 Rel: 05 Nov 18
 
Protective cover specifically designed to fit the Tiptop Audio Mantis Eurorack case
Notes: The tools we use to compose and produce music are dear to our hearts. Dust, liquid and accidental impact have taken many a good synth down over the years - this is where Decksaver steps in. Precision trimmed for perfect fit whilst accommodating cables, the TipTop Audio Mantis Case can sit ready for operation. This cover is designed with 55mm clearance for patch cables, meaning you can leave your cables in place when travelling or protecting your modular setup in the studio. Shields delicate controls and internal components from damage at home, on the road and on stage.
Read more
 2 in stock $45.40
Click for better price!
or call +44 20 7424 1960
quote 708789
40
4ms 10 Pin Multi Power Cable
4ms 10 Pin Multi Power Cable (synth module power cable)
Cat: 711993 Rel: 12 Dec 18
 
Flexible power cable for Eurorack modules
Notes: 10-conductor ribbon cable with three 10-pin connectors and a 16-pin connector on one end (20" total length), for connecting more than 2 modules in a Pod.
Read more
 2 in stock $7.13
41
Electrosmith 16-16 Pin Synth Module Power Cable (25cm)
Cat: 714423 Rel: 31 Dec 18
 
16-16 Pin Eurorack Power Cable
 2 in stock $1.58
42
ASM Hydrasynth 8-Voice Wavetable Desktop Synthesiser With 24 Polytouch Polyphonic Aftertouch Pads
Cat: 768004 Rel: 06 Mar 20
 
wavetable desktop synthesiser
Notes: Desktop version of the mega Hydrasynth. The same amazing synth engine, paired with polyphonic, pressure-sensitive touchpads, making it an interesting creative alternative to the keyboard version.

*** New 2.0 Firmware update for all Hydrasynth models - March 2023 ***

This is a free of charge update for all current and new users of Hydrasynth. The biggest news in this update includes:
Expanded memory to 8 banks (Keyboard, Desktop, and Explorer only)
NEW modulation source: VOICE MODULATOR
OSC Bit reducer
LFO quantizer
ENV quantizer
LFO Step Advance
Global FX bypass
Increased Vibrato resolution
New Sustain pedal options including Sostenuto
More LED options
Glissando in glide options
Arp Range goes to 6 octaves
Arp Step Offset parameter
More Rand/Init shortcuts (all STEP LFO steps, Wavescan waves, Voice mod offsets)
Local On/Off saved
......And more!
This is the first major update to the Hydrasynth family in a little, which adds a tonne of new features.


Supplier's notes:
The HYDRASYNTH Desktop / Rack has the same great sound engine as the HYDRASYNTH Keyboard. The sound engine is a sound designers dream synth as well as a performing musicians ideal. The sound engine is designed for maximum flexibility. At the same time, we designed the user interface in a way to allow you to edit the patch quickly with a minimal amount of paging and many workflow shortcuts.

Utilizing an advanced wavetable synthesis engine, 3 Oscillators, dual Wave Mutators and 2 filters that can be configured in series or parallel, the tone generating capabilities are unmatched.

As for the performance capabilities, The Hydrasynth Desktop / Rack has 24 polyphonic pressure touch pads so that you can play the unit without needing to connect a keyboard or other controller. Using multiple pad layout modes as well as quick to access scale modes, the Hydrasynth Desktop / Rack is easy to make music on.

The Hydrasynth Desktop / Rack comes with rack ears so that you can mount it in a standard 19" rack.
Read more
MRP:$949.34 SAVE 25%
 1 in stock $715.96
Click for better price!
or call +44 20 7424 1960
quote 768004
43
Rode Lavalier GO Professional Lavalier Microphone (black)
Cat: 742132 Rel: 16 Aug 19
 
Professional-grade wearable microphone
Notes: Lavalier GO is a professional-grade wearable microphone designed for use in a wide range of applications. The 3.5mm TRS connector is designed to pair perfectly with the RODE Wireless GO and most recording devices with a 3.5mm TRS microphone input.

Lavalier GO is designed to perform excellently in any broadcast application. Featuring a discreet 4.5mm omnidirectional microphone, it delivers crystal clear audio in all environments and is incredibly forgiving when it comes to placement on talent, allowing for greater flexibility in fast-paced situations.

A foam pop shield is supplied to minimise wind noise and vocal plosives (hard 'b', 't' and 'p' sounds), as well as a durable mounting clip with in-built cable management for quick and easy rigging. It also features a hard-wearing Kevlarr reinforced cable, designed to withstand the rigours of any shoot.
Read more
MRP:$73.92 SAVE 24%
 6 in stock $55.85
44
4ms SWN Spherical Wavetable Navigator 6-Channel Synthesiser Module (black)
4ms SWN Spherical Wavetable Navigator 6-Channel Synthesiser Module (black) (oscillator/digital/LFO/synth voice synth module)
Cat: 648377 Rel: 29 Apr 19
 
Six-channel synthesiser module - 26HP
Notes: The Spherical Wavetable Navigator (SWN) is a six-channel synthesiser that makes it easy to create slowly morphing drones, polyphonic melodies, evolving sequences, and rich textures.

The SWN features six wavetable oscillators with independent pitch, level, and waveform controls. Six LFOs (Low Frequency Oscillators) can be used as modulation sources and/or envelopes, making it easy to add dynamic motion to your patch. Each channel is a full voice and can be "played" using the top row of buttons, the internal LFOs, or note-change detection on the 1V/oct jacks. The SWN ships with 12 three-dimensional (spherical) wavetables and an easy interface which allows you to record and edit custom wavetables from live audio. Open-source software for Mac, Windows, and Linux called SphereEdit can be freely downloaded and allows you computer to create, edit, and convert .wav files into Spherical wavetables to transfer into the SWN with an audio cable.

New firmware available which adds extra features, visit https://4mscompany.com/p.php?p=820&c=5 for details.
Read more
 1 in stock $568.12
Click for better price!
or call +44 20 7424 1960
quote 648377
45
Doepfer A-140-2 Dual Micro ADSR Module (silver)
Doepfer A-140-2 Dual Micro ADSR Module (silver) (dual/stereo/envelope generator synth module)
Cat: 684450 Rel: 18 Jul 18
 
Dual ADSR envelope generator - 8HP
Notes: Module A-140-2 contains two ADSR type envelope generators behind a front panel with 8 HP only.

Each ADSR provides these controls and in/outputs:

- LED (displays the envelope output)
- A: manual Attack control
- D: manual Decay control
- S: manual Sustain control
- R: manual Release control
- Gate Input
- Retrigger Input
- CVT Input with attenuator (CVT = CV Time)
- Envelope Output 1
- Envelope Output 2

The output voltage range for each envelope is 0 - 10V. The time range of Attack/Decay/Release is about 1ms to 30s.

By means of internal jumpers one can select which time parameters are controlled by the CVT input (e.g. D only or D+R or A+D+R) and in which direction (i.e. if an increasing CVT shortens or stretches the time parameter in question).

Socket CVT can be normalled to an internal fixed voltage (i.e. the switching contact is connected to an internal fixed voltage). That way it's possible to change all time parameters simultaneously by means of the CVT control.

Another jumper is used to set output 2 to normal or inverted envelope.

And another jumper is used for the normalling of Gate 2 to Gate 1 (i.e. ADSR#2 is also triggered by Gate 1).

Two more jumpers are used for the optional bus access to the gate signal of the bus for each ADSR. Changing the positions of the mentioned jumpers allows to modify the factory settings.
Read more
 1 in stock $142.55
Click for better price!
or call +44 20 7424 1960
quote 684450
46
Arturia Keylab 61 MKII 61-Key USB MIDI Controller Keyboard (black)
Cat: 694337 Rel: 30 Aug 18
 
Expressive, versatile & powerful next-generation 61-note USB MIDI controller keyboard - black
Notes: The definitive MIDI controller keyboard, KeyLab MkII is a luxurious, expressive tool for your studio or live rig. Unsurpassed connectivity, effortless integration, customizable interface, and inspiring included software; there simply is no other MIDI controller quite like KeyLab MkII.

KeyLab MkII is an expressive, versatile, and superbly powerful next-generation USB MIDI controller keyboard. It features dynamic performance and studio controls, including a high quality 49-note keyboard with aftertouch, 16 RGB backlit pads, 9 faders, 9 rotary knobs, and dedicated DAW and transport controls. Its huge connectivity also includes CV/Gate outputs, so you can take command of outboard synth and Eurorack modules with ease. Factor in the amazing included software, and you've just found your ideal creative companion for the studio and stage.

Another level in terms of quality and luxury, KeyLab MkII is a treat for the fingertips and gives unprecedented levels of control over your music and software.

Both 49-key and 61-key versions of KeyLab MkII feature Arturia's Pro-Feel action, the same lusciously playable keybed as the MatrixBrute and MiniBrute 2. Sensitive enough to accurately capture the subtleties and nuances of delicate playing, while still being robust enough to feel the energy of high-impact playing.

Every version of KeyLab MkII also offers 16 RGB-backlit, multi-function performance pads which can be used in a huge variety of ways, whatever suits your performance style or studio needs best. Trigger custom chords, activate samples, quickly switch user maps, KeyLab MkII puts the "control" firmly back into "controller".

A gateway to software, KeyLab MkII features 9 rotary encoders, 9 faders, and a selection of fully assignable buttons to give you unfettered access to your virtual instruments, effects, and recording environment. Send and receive CV/gate data to bridge the gap between modular and MIDI, with a fully customizable setup.

To allow for maximum expression, and to put that unmistakable "human touch" into your music, KeyLab MkII features multiple expression pedal inputs, that can be assigned to whatever parameters you desire in your DAW or virtual instruments, and sports robust, luxurious machined metal pitch and mod wheels. Truly a live-performers dream!

Amazingly versatile, hugely expressive, and geared up to enhance your creativity and workflow wherever your music takes you.

Included is an impressive software bundle: Arturia's complete Piano V virtual piano instrument, Analog Lab 3, and Ableton Live Lite.
Read more
MRP:$537.50 SAVE 14%
 1 in stock $462.52
47
Erica Synths DB-01 Analogue Desktop Bassline Synthesiser & Sequencer
Cat: 753844 Rel: 17 Apr 20
 
Desktop bassline synthesiser & sequencer
Notes: From basslines and rave sounds to massive drones and drums - the Erica Synths Bassline DB-01 synthesizer lets you explore new territories of sound and performance techniques and go from a melody to noise and back in no time. The DB-01 packs an analogue Erica Synths signature sound engine with an advanced sequencer on top of it.

Features:
All analogue sound engine
Aggresive acidbox filter design
One knob overdrive for even more destructive sound
Transistor based sub-oscillator
Independent amplitude, filter cutoff and pitch envelopes
BBD based detune for massive swarm sound
Syncable LFO with multiple waveforms for FM and VCF modulation
Noise source
Intuitive, easy to use sequencer for up to 64 step patterns
Sequence transposing
Pattern randomization
Arpeggiator
Modulation track with VCF cutoff automation
Built in and user defined scales with micro tonal possibilities
Analogue clock in and out
CV/Gate output/input
MIDI IN and THRU - play it with a keyboard!
8 banks of 16 pattern memory
Compact, durable aluminium enclosure
Read more
 1 in stock $478.36
Click for better price!
or call +44 20 7424 1960
quote 753844
48
Doepfer A-100B2 Blank Panel 2TE (silver)
Cat: 755424 Rel: 14 Nov 19
 
Robust, blank front panel for use with modular racks & other applications - 2HP wide
Notes: Blank panel, 2HP, constructed from anodised aluminium, silver.
Read more
 4 in stock $3.16
49
AJH Synth MiniMod Precision Voltages Accurate Voltage Adder/Transposer Module (black)
Cat: 755446 Rel: 07 Nov 19
 
Precision voltages module - dark edition
Notes: Sometimes real precision is required with pitch control voltages - this module features a super accurate "Cal" output, which is accurate to <1mV over 20V, translates to one cent over 20 octaves! It is ideal for calibrating the scaling of VCO's, indeed we have been using our own version of this circuit to calibrate our own MiniMod VCO's for the last three years.

As well as being a precision voltage source it is also a very accurate voltage adder, it has two channels (A & B) and both full volts (octaves) or 1/12th volt increments (notes) can be either added to or subtracted from the incoming signal. Perfect for adding a voltage offset to the output of a sequencer or it can be used to add switchable octaves to a VCO which only has course and fine tunes controls.

It also has a "mix" output, which allows either A channel on its own, or with the three way toggle switch channel B can either be added to, or subtracted from channel B, and this is in addition to the addition and subtraction per channel mentioned earlier.

Dimensions: 10HP wide, 26mm Deep
Read more
 1 in stock $220.70
50
MOTU M4 USB-C 4x4 Audio Interface
MOTU M4 USB-C 4x4 Audio Interface (audio/MIDI interface)
Cat: 755895 Rel: 30 Dec 19
 
USB audio interface
Notes: Equipped with the same ESS Sabre32 Ultra DAC Technology found in audio interfaces costing thousands, the M4 delivers an astonishing 120 dB Dynamic Range on its main outputs. ESS converters also drive the headphone output, which rivals dedicated headphone amplifiers costing hundreds. Ultra-clean preamp circuits produce a measured -129 dBu EIN on the mic inputs. Capture and monitor your audio with pristine clarity.

The M4 provides best-in-class speed for monitoring live inputs (mic, guitar or keyboard) through your computer, thanks to MOTU's expertly engineered USB drivers, which deliver class-leading, ultra-low 2.5 ms Round Trip Latency (at 96 kHz with a 32 sample buffer).

When recording and mixing, nothing is more critical than achieving optimum levels. The M4 is the only audio interface in its class with a full color LCD featuring clear, detailed level meters for all inputs and outputs. Enjoy professional-level volume control and feedback to get your sound just right.

The M4 driver provides convenient loopback channels to your host computer, so you can easily route computer output back to the computer, where you can mix it with live mics and/or guitar inputs from the M4 in your host software for live streaming or podcasting. Streaming and podcasting has never been easier and better-sounding!

Decades of award-winning product engineering for hit songs, mega tours, primetime shows and blockbuster movies goes into every MOTU audio interface.
Read more
MRP:$262.94 SAVE 12%
 4 in stock $230.20
Artikel 1 bis 50 von 500 auf Seite 1 von 10 anzeigen
1  2  3  4  5  6  7  8  9  10  »
Cart subtotal: