100% Sicheres Einkaufen

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Sicheres Einkaufen

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Eight Weeks: All Genres

View:
Options
Artikel 1 bis 50 von 3,934 auf Seite 1 von 79 anzeigen
1  2  3  ...  77  78  79  »
Cat: 698459 Rel: 08 Aug 18
 
Universal low-impedance bus board
Notes: The ACL EVE 1 busboard is used to distribute the operating voltages of a power supply unit to supply up to 20 modules in a Eurorack case.

It was developed with the aim of achieving the lowest possible electrical contact resistance between the power supply unit and the modules connected to it.

This is reflected in minimal potential differences between the power supply unit and between all connection terminals of the modules and the terminals, which almost completely eliminates any couplings between modules and the resulting interference.

This is achieved by a six-layer sandwich design in which each voltage supplied by the power supply unit has its own complete layer for distribution to the module connection terminals, i.e. +12V, -12V and +5V each have the complete surface of the bus board available as copper surface, while the ground even has three layers available, resulting in an extremely low resistance of the ground bar (ground). The arrangement of the layers is like a sandwich, there is almost no influence between e.g. the +5V rail on which often disturbing digital modules are connected and ground or the +/- 12V rails. In addition, there are 4 buffer capacitors with 22uF and 100nF each for the +12V and -12V rail, which are arranged as parallel connected packets with 22uF and 100nF each at the outer ends left and right. These capacitors are Ultra Low ESR MLCC types.

Furthermore, a CV and a gate bus are available up to four times (two at the top and two at the bottom, each bridged by a jumper). These are consequently shielded from each other and from the voltage bars and thus cannot influence each other or other voltage bars (+/- 12V, +5V) by crosstalk, which further rounds off the "low-noise design".
Read more
 1 in stock $77.60
ACL Kazu To EVE1 Connection Cable (module connection cable)
Cat: 698460 Rel: 08 Aug 18
 
Module connection cable
Notes: This cable is needed to connect the ACL KAZU PSU module to the EVE busboard. The cable is equipped with two five-pin connectors, which are compatible to KAZU and EVE-1.

Module and bus board are not included.
Read more
 1 in stock $11.69
Cat: 693407 Rel: 16 Jul 18
 
Compact, versatile drum-synth featuring 17 analogue drum & percussion instruments with built-in 64-step sequencer
Notes: Arturia's best-selling analogue drum machine has been re-designed with a new black and metallic colour scheme.

The striking stylized snippet of "The Creation of Adam" by Michelangelo, one of humanity's finest works of art, is emblazoned across the front panel, and the whole instrument has been decked out with metallic trim.

The Arturia DrumBrute Drum Machine is a compact, versatile drum-synth featuring 17 analogue drum and percussion instruments with a built-in 64-step sequencer. The DrumBrute Drum Machine's portable size makes it perfect for studio and live performances alike, allowing you to incorporate live finger-drumming into your sets and productions. The ergonomic layout and full-size controls allows you generate sounds and rhythms with ease, with 64 built-in pattern memories allowing you to create and store your custom patterns. The DrumBrute also features USB/MIDI and Analog Clock I/O for added versatility.

Analog Percussion:
The Arturia DrumBrute Drum Machine features 17 fully analogue drum and percussion instruments including: two kicks, snare, clap, open and closed hi-hats, high and low toms as well as conga, maracas, rimshot, clave, tambourine, zap cymbal and a reverse cymbal. This wide variety of different percussive instruments allow you to create intricate and interesting rhythm patterns with ease. One of the most unique features is the main output which includes a renowned two-mode Steiner-Parker filter. This filter allows you to add frequency sweep and bass drops with ease. Every drum sound also features multiple parameters that can be tweaked and edited to your desire, allowing you to create your perfect kit.

Portable Design, Ergonomic Layout:
The compact and portable design of the Arturia DrumBrute Drum Machine makes it perfect for taking with you to both studio settings and stage performances. The built-in 64-step sequencer allows you to utilise up to 64 steps, which can be chained together in song mode to create original performances. The DrumBrute's layout features a dedicated button, knob or pad for every features available, allowing you to easily navigate between parameters while eliminating the need for tedious menu selections. Its rugged, chunky pads and sturdy knobs are highly reliable, ensuring optimal durability that will withstand the rigors of transportation and extensive use.

In-Depth Editing:
The DrumBrute features a wide variety of effects and editing tools to add a new dynamic to your patterns and sequences. You can use the natural 'Swing' feature to add extra groove into your sequences, adding subtle time shifts to create a natural feel. The 'Randomness' function allows you to add in sporadic glitches into your sequences, while the Step Repeat, Roller and Looper functions allow you to mix up your rhythm entirely. These advanced features give you full rein over all your sequences and patterns, ideal for live performances.

Ideal For Live & Studio Applications:
The wide range of performance effects and portable size makes the Arturia DrumBrute ideal for both live performances and studio settings alike. The DrumBrute features a variety of digital and analogue connectivity plus sync options including: MIDI, Clock, 1PPS, 2PPQ, DIN24, and DIN48. This allows you to integrate your DrumBrute in your existing setup and work with all your other modular, synth and sequencing units. 3.5mm and 1.4'' headphone outputs are included to accommodate both headphone connection sizes, plus the USB and MIDI connections allow you to use the DrumBrute as a dedicated MIDI interface to control your favourite DAW.
Read more
 More than 10 in stock $360.36
Cat: 697102 Rel: 06 Aug 18
 
Drum machine featuring bold, hard-hitting pure analogue sounds
Notes: This is the drum machine you've been waiting for.

Combining bold, hard-hitting analogue sounds, a monstrous output distortion, performable controls, superb connectivity, and a powerful sequencer, DrumBrute Impact will fill your music with energy and muscle.

Putting the focus on "Brute", DrumBrute Impact features 10 high-energy, refined, punchy analogue sounds.

You can also use the exclusive "Colour" sound-shapers to introduce unique, per instrument effect for some variation. Boost the harmonic content, add some drive, snap, or crack at the touch of a button, you can even automate tonal changes by creating a "Colour" sequence. If you want your drums to push even harder, use the built-in distortion on the output for some drum-optimized crunch.

DrumBrute Impact is a drum machine for musicians and producers who crave raw power and monstrous tone.

Awesome drums made easy:

Sharing the same prize-fighting sequencing architecture found in the original DrumBrute, you'll love the simple, fun, and intuitive sequencer in DrumBrute Impact.

Whether you want to create complex, phasing polyrhythms or straight, pounding rhythms; record a finger-drumming performance; punch in a step-sequenced masterpiece; DrumBrute Impact beats to your rhythm. Use the touch strip to create some real-time glitchy, beat-repeat breakdowns, spice up a single instrument or your whole pattern with a dedicated 'Random' knob, and add some syncopation and groove with the 'Swing' feature.

A true analogue experience:

Connect to your other gear, sync up, and make some music the old-school way.

Get away from computer screens, say goodbye to sub-menus, and jump into the world of tactile, instant, analogue satisfaction. Featuring a huge array of sync and connectivity options, you'll be able to hook up and jam with practically any other synth, sequencer, or MIDI-enabled instrument. Mix on the fly with dedicated controls for every function, multitrack, record, effect, and mix the sound your way with multiple bus outputs. Save patterns that you love, chain them together, and create full songs and live sets, all without looking at a single screen.

DrumBrute Impact is a massive sounding, creativity fuelling beast, with effortless workflow and amazing performance controls.
Read more
 More than 10 in stock $281.70
Cat: 686574 Rel: 29 Jun 18
 
Professional-grade 49 key semi-weighted MIDI keyboard & controller, with Analog Lab 2 Software
Notes: With everything you need to express your musical ideas, take command of your studio, and perform like you've always dreamed, KeyLab Essential is an intuitive, powerful, carefully crafted controller keyboard that's easy to master.

Music is at the heart of this controller. Every aspect of KeyLab Essential has been carefully chosen to give you the best possible experience when creating and performing. From the responsive keyboard to the intelligently assigned knobs and faders, you'll feel like everything you touch turns to gold. KeyLab Essential makes navigating your track a breeze thanks to the dedicated DAW Command Center, and makes browsing your presets an exciting, inspiring experience.

It's easy to let your concentration drift and your inspiration slip when you spend hours on tedious tasks. KeyLab Essential is the result of careful research, with the aim of streamlining your creative process, giving you more time to express yourself through music. With the KeyLab Essential on your desk and its comprehensive set of music software loaded in your computer, the only required step to start experimenting, composing and recording is sitting in front of them.

Once you've experienced the creative workflow of KeyLab Essential, you'll wonder how you ever made music without it.

Geared for maximum compatibility, KeyLab Essential gives you unadulterated control of your digital world, seamlessly integrating with virtual instruments and DAW software.

KeyLab Essential is packed with clever controls that help you make swift work of everyday tasks within your recording software. Play your track, jog forwards and back, save, toggle your metronome and loop, record, and punch in on the fly. This functionality keeps your hands on the controller and your mind in the music. As well as offering ultimate integration with Analog Lab 2, KeyLab Essential is a universal MIDI controller, compatible with any third-party instruments or software. KeyLab Essential also comes with Ableton Live Lite so you can start recording, editing, and releasing your music with one of the most popular music platforms on the planet.

Whether you're a total newcomer to the world of recording, or a seasoned pro who's set in their ways, KeyLab Essential has the potential to revolutionize your creative process.

A complete keyboard production studio, KeyLab Essential comes with some incredible software titles. Whether you want a searing-hot synth lead or an ethereal string pad, a vintage upright piano or a complex, animated soundscape, KeyLab Essential gives you everything you need to perform and record. All the ingredients of the cocktail are there and ready to be mixed according to your own style.
Read more
 4 in stock $179.65
Cat: 693412 Rel: 16 Jul 18
 
Compact synthesiser with pure analogue signal path - Creation edition
Notes: Arturia's best-selling small-format analogue monosynth has been re-designed with a new black and metallic colour scheme.

The striking stylized snippet of "The Creation of Adam" by Michelangelo, one of humanity's finest works of art, is emblazoned across the front panel, and the whole instrument has been decked out with metallic trim.

MicroBrute is pure analogue sonic powerhouse of a synth. Small in size but loaded with features, it follows in the footsteps laid by its big brother the MiniBrute.

Packed with mixable waveforms, a new sub oscillator design, the famous Steiner-Parker multimode filter, super-fast envelope, syncable LFO and the new step sequencer, not to mention the patchable mod matrix the MicroBrute is a landmark new synth at an incredible price.

The MicroBrute is new but carries the award-winning heritage of its big brother, the MiniBrute.

The MicroBrute was designed to be small but still retain an amazing sound quality. With a 100% pure analogue voice path and advanced interconnectivity via MIDI, USB, CV/GATE, this machine is a true powerhouse synthesiser that takes your sound to a new level.

A synthesiser is a musical instrument that is meant to be played. However, playing a synthesiser is more than just playing some notes on a keyboard and recalling someone else's presets. If that was the goal you could be looking at accordions or going to a department store to buy your keyboard (along with socks, milk and toilet paper) - but you aren't because you are more creative than that.

No presets, no menus, nothing to get between you and the ability to sculpt your sound live. Not only does MicroBrute give you the means to create, perform and be completely original every time you power up, it does so with astounding sound quality.
Read more
 More than 10 in stock $268.94
Cat: 676104 Rel: 28 Jun 18
 
20in/24out audio interface featuring 4 class A mic preamplifiers
Notes: Inspired by our 20 years of expertise in analogue hardware design, iD44 is Audient's most powerful audio interface yet. Featuring four Audient console mic pres, class-leading converters, ADAT expandability and more, iD44 delivers the audio performance of an Audient console on your desktop, giving you the professional sound you deserve.

iD44 features four Class-A console mic pres, the same discrete circuit design found in Audient's renowned recording console the ASP8024-HE and throughout their product range. Designed to deliver ultra- low noise and low distortion, the Audient mic pre will provide an accurate reproduction of your source, along with enough analogue warmth to add a bit of character, making it the go to mic pre for any project.

Hear your audio more accurately than ever with iD44's all new high performance AD/DA converter technology. Next generation converters have been designed to deliver optimised dynamic range, ensuring you hear the most honest and natural translation of your recording. Hear subtle detail, make better mix decisions and experience remarkable clarity from the moment you press play.

As well as offering you 4 channels of mic pre, iD44 has two harmonically rich JFET D.I inputs designed to replicate the input stage of a classic valve amplifier. Simply plug in your guitar, bass or synth whenever inspiration strikes and start recording instantly.

Two fully balanced insert points enable you to integrate your outboard gear prior to conversion, letting you quickly insert your favourite compressors, vintage mic pres or EQs. The insert return also gives you direct access to the analogue to digital converters - providing the cleanest signal path possible, making it great for print-backs or integrating outboard analogue line level sources. Whether you're creating vocal chains or processing stems iD44 gives you the flexibility you need.

Comfort, clarity, confidence - Two Independent Headphone Outputs:

Get the most out of your headphones and your artist with iD44's advanced headphone amp technology. Whether you're tracking an artist or working on a mix, iD44's two stereo headphone amps have been designed to provide enough power for your headphones to perform to their highest potential. Set up two separate cue mixes through iD44s independent stereo outputs, each driven by their own DAC - giving you incredible depth and accuracy at all times.

Console Style Monitor Control - The Power of Simplicity:

Taking inspiration from our heritage in analogue console design, iD44 features a range of flexible monitor control functions including dedicated talkback, cut and dim buttons along with polarity, mono, speaker select and cue mix monitoring.

All monitoring functions can be assigned to three programmable function buttons. No more time spent searching for software controlled features or scrolling through menus, just assign the monitoring functions you need and quickly take control of your session. Real hardware control at your fingertips.

Software you can rely on:

iD44's all new mix focused software the iD Mixer has been designed with simplicity and elegance in mind. Create up to four stereo artist cue mixes, name and customise channels, save layout presets, assign hardware function buttons, quickly setup advanced routing, use presets in standalone mode and more. Tightly integrating hardware and software, the iD Mixer makes the recording process easy giving you total control and reliability where you need it most.

Communication is key:

iD44's new dedicated talkback technology enables you to utilize any audio source connected to your computer such as a built in or USB microphone as your talkback mic, freeing up valuable mic pres while offering an effective talkback solution no matter where you are.

Hardware for your software:

With a touch of a button iD44's volume encoder becomes a virtual scroll wheel, enabling you to take control of your DAW, plug-in parameters and more - just like you're adjusting a piece of hardware. Quickly dial in settings, adjust faders or even write in automation without spending hours staring at a screen.

USB connection:

iD44 comes with both a standard USB cable and a USB Type-C cable enabling you to connect to any USB compatible Mac or PC supporting USB 2.0 or above.

Quality deserves protection:

Unlike many interfaces on the market iD44 has an all-metal construction, meaning it will stand up to those countless late nights in the studio and days on the road. From its hand finished aluminium knobs to its high grade component selection, iD44 matches professional sound with precision engineering and the end result is stunning.
Read more
 3 in stock $530.44
Cat: 695404 Rel: 10 Aug 18
 
On-ear professional monitor headphones
Notes: Designed for studio, broadcast and mobile applications, the ATH-M60x on-ear professional monitor headphones utilize the same proprietary 45 mm large-aperture drivers found in the legendary ATH-M50x headphones, delivering exceptional clarity throughout an extended frequency range with accurate bass response. The low-profile, closed-back, on-ear design provides excellent sound isolation and a great fit, which is enhanced by the exceptional comfort and durability of the memory foam earpads and headband. The headphones come with three interchangeable cables (1.2 m - 3.0 m coiled, 3.0 m straight, and 1.2 m straight - each with a 3.5 mm (1/8") mini-plug), a 6.3 mm (1/4") screw-on adapter, and a protective carrying pouch.
Read more
 1 in stock $179.65
Cat: 674899 Rel: 04 Jul 18
 
Bluetooth active fit earphones in black
Notes: The ATH-SPORT50BT wireless in-ear headphones pair great sound with great fit and freedom of movement to fuel your workout wherever it takes you. The comfortable ear-hook design keeps the headphones securely in place so the powerful 9 mm drivers can deliver all the crystal-clear audio received through the Bluetooth wireless signal. And with a mic and controls conveniently built into the left housing, it's easy to handle calls and control your music on the run.

The fit and sound characteristics can be adjusted further through the interchange of two types of included eartips: standard silicone eartips (XS/S/M/L) that provide outstanding sound isolation and ridged eartips (S/M/L) that allow some ambient noise to seep in for safer use outdoors. The internal lithium polymer rechargeable battery delivers six hours of continuous use and recharges easily with the included 30 cm (1') USB charging cable. The headphones are also IPX5 Waterproof Certified, so you can wash them off when your workout is through.
Read more
 1 in stock $69.04
Cat: 674902 Rel: 05 Jul 18
 
Bluetooth active fit earphones in pink
Notes: The ATH-SPORT50BT wireless in-ear headphones pair great sound with great fit and freedom of movement to fuel your workout wherever it takes you. The comfortable ear-hook design keeps the headphones securely in place so the powerful 9 mm drivers can deliver all the crystal-clear audio received through the Bluetooth wireless signal. And with a mic and controls conveniently built into the left housing, it's easy to handle calls and control your music on the run.

The fit and sound characteristics can be adjusted further through the interchange of two types of included eartips: standard silicone eartips (XS/S/M/L) that provide outstanding sound isolation and ridged eartips (S/M/L) that allow some ambient noise to seep in for safer use outdoors. The internal lithium polymer rechargeable battery delivers six hours of continuous use and recharges easily with the included 30 cm (1') USB charging cable. The headphones are also IPX5 Waterproof Certified, so you can wash them off when your workout is through.
Read more
 1 in stock $69.04
Cat: 674900 Rel: 05 Jul 18
 
Bluetooth active fit earphones in turquoise blue
Notes: The ATH-SPORT50BT wireless in-ear headphones pair great sound with great fit and freedom of movement to fuel your workout wherever it takes you. The comfortable ear-hook design keeps the headphones securely in place so the powerful 9 mm drivers can deliver all the crystal-clear audio received through the Bluetooth wireless signal. And with a mic and controls conveniently built into the left housing, it's easy to handle calls and control your music on the run.

The fit and sound characteristics can be adjusted further through the interchange of two types of included eartips: standard silicone eartips (XS/S/M/L) that provide outstanding sound isolation and ridged eartips (S/M/L) that allow some ambient noise to seep in for safer use outdoors. The internal lithium polymer rechargeable battery delivers six hours of continuous use and recharges easily with the included 30 cm (1') USB charging cable. The headphones are also IPX5 Waterproof Certified, so you can wash them off when your workout is through.
Read more
 1 in stock $69.04
Cat: 674901 Rel: 05 Jul 18
 
Bluetooth active fit earphones in yellow
Notes: The ATH-SPORT50BT wireless in-ear headphones pair great sound with great fit and freedom of movement to fuel your workout wherever it takes you. The comfortable ear-hook design keeps the headphones securely in place so the powerful 9 mm drivers can deliver all the crystal-clear audio received through the Bluetooth wireless signal. And with a mic and controls conveniently built into the left housing, it's easy to handle calls and control your music on the run.

The fit and sound characteristics can be adjusted further through the interchange of two types of included eartips: standard silicone eartips (XS/S/M/L) that provide outstanding sound isolation and ridged eartips (S/M/L) that allow some ambient noise to seep in for safer use outdoors. The internal lithium polymer rechargeable battery delivers six hours of continuous use and recharges easily with the included 30 cm (1') USB charging cable. The headphones are also IPX5 Waterproof Certified, so you can wash them off when your workout is through.
Read more
 1 in stock $69.04
Cat: 694857 Rel: 29 Jun 18
 
MIDI restarter for starting & stopping a MIDI slave, without the need to touch the master clock
Notes: The MIDI-Restarter makes it possible to send start/stop commands with the push of a button - not immediately, but synchronized to the next bar of your track. Thus, you can conveniently (de)activate and reset MIDI slaves. Three modes of operation are available:

First mode: The Restarter sends stop and start commands one after the other as soon as the next bar is reached. This means that you can easily start sequencers and pull back already running devices to correct timing. Note: Some MIDI devices are not compatible with this mode, as stop and start messages are sent out very quickly one after the other. If you have such a piece of gear, please switch to the second mode of operation.

Second mode: Similar to the first mode, but the stop command is sent one MIDI clock tick before the new bar is reached.

Third mode: With the connected sequencer running, the Restarter sends a MIDI stop command at the beginning of the next bar. If the sequencer is inactive, a start command is send.

You can choose 4/4 or 3/4 time signatures. Additionally, it is possible to determine whether only the generated MIDI clock and MMC commands (Start, Stop, Continue) are send or if you'd like the Restarter to hand-off incoming MIDI data at the output as well.
Read more
 2 in stock $169.02
Cat: 695389 Rel: 18 Jul 18
 
Passport 5V adapter
Notes: The coolest solution for +5V needy modules! Bastl's new tiny adaptor can convert +-12V from your power supply into +5V, and it can access the powerline on your bus board and feed all modules connected to it. Optionally it can feed only one single module through the in-built pin connector, while leaving the +5V line on your bus board untouched. In both situations it will perform flawlessly, and you can change the setting anytime with dedicated jumper.
Read more
 1 in stock $15.95
Cat: 695388 Rel: 18 Jul 18
 
Plywood case for Eurorack modules
Notes: Outside dimensions: 385 (width) x 280 (length) x 110 (height) mm

Inside dimensions: 2 x 72 HP, 100 mm depth (approx. 60 mm in the power supply area)

Material: plywood, 10 mm (thick)

Electrical parameters:

Input: 100-240V AC

Output voltages/current: +5V/5000mA, +12V/2800mA, -12V/500mA
Read more
 1 in stock $235.99
Cat: 696145 Rel: 18 Jul 18
 
Monophonic granular sampler with MicroSD card slot - Black Noir edition
Notes: MicroGranny 2 is monophonic granular sampler. It reads wav samples from microSD card and applies granular algorithms to them. You can also adjust start, end, sample rate (tuned or free run), crush and envelope (attack release). MIDI Input allows external control of all parameters as well as transposition of the samples, or playing individual grains by different keys.

Hand assembled instrument with full enclosure comes in printed gift box which includes:

- Assembled instrument - full enclosure
- 9V battery
- User manual
- Chain connectors
- Stickers
- MicroSD card with samples
Read more
 1 in stock $192.40
Cat: 694136 Rel: 29 Jun 18
 
Monophonic granular sampler with MicroSD card slot - transparent enclosure
Notes: MicroGranny 2 is monophonic granular sampler. It reads wav samples from microSD card and applies granular algorithms to them. You can also adjust start, end, sample rate (tuned or free run), crush and envelope (attack release). MIDI Input allows external control of all parameters as well as transposition of the samples, or playing individual grains by different keys.

Hand assembled instrument with full enclosure comes in printed gift box which includes:

- Assembled instrument - full enclosure
- 9V battery
- User manual
- Chain connectors
- Stickers
- MicroSD card with samples
Read more
 3 in stock $192.40
Cat: 700090 Rel: 29 Jun 18
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


MicroGranny 2 is monophonic granular sampler. It reads wav samples from microSD card and applies granular algorithms to them. You can also adjust start, end, sample rate (tuned or free run), crush and envelope (attack release). MIDI Input allows external control of all parameters as well as transposition of the samples, or playing individual grains by different keys.

Hand assembled instrument with full enclosure comes in printed gift box which includes:

- Assembled instrument - full enclosure
- 9V battery
- User manual
- Chain connectors
- Stickers
- MicroSD card with samples
Read more
 1 in stock $179.70
Cat: 677574 Rel: 20 Jul 18
 
Professional USB studio microphone
Notes: Wherever music is created, Beyerdynamic, microphones and musicians go hand in hand. On the world's largest and smallest stages and studios. The new USB Studio Microphone FOX captures music anywhere, anytime.

For home studio and mobile recordings Singer-Songwriters, Vocalists, Musicians, Podcasters, Gamers and YouTubers Perform arts free of technical distraction.

With its classy style and outstanding design elements, FOX fits in every home studio or any place away from home. No melody will be lost because your studio is always with you. FOX can easily connect to a PC or smartphone via Apple or Android adapter. Record songs, podcast and much more with the according software.

FOX is a novel tool that brings passionate artists to the fore. Produce sensational studio sound, remarkable acoustics for voice, vocal or instrumental recordings. Maintain your artistic freedom with the easy plug-and-play USB connection. The included adapter guarantees a fast and easy mounting on a microphone stand. Create better with FOX and stand out in a crowd.

Package includes:

- FOX pop shield
- Desk stand with ring mount
- FOX USB cable
- 5/8 - 3/8 Thread adapter
Read more
 2 in stock $167.95
Cat: 630234 Rel: 12 Jul 18
 
Cotton tote bag with Clone print
Notes: Black cotton bag with white Clone logo on the front and list of records on the back. Holds 15 records with ease and about 20 with a bit of effort.
Read more
 2 in stock $5.05
Cat: 695536 Rel: 13 Jul 18
 
Cotton tote bag with Clone print
Notes: Blue cotton bag with white Clone logo on the front and list of records on the back. Holds 15 records with ease and about 20 with a bit of effort.
Read more
 1 in stock $5.05
Cat: 695533 Rel: 13 Jul 18
 
Cotton tote bag with Clone print
Notes: Purple cotton bag with white Clone logo on the front and list of records on the back. Holds 15 records with ease and about 20 with a bit of effort.
Read more
 1 in stock $5.05
Cat: 695535 Rel: 13 Jul 18
 
Cotton tote bag with Clone print
Notes: Red cotton bag with white Clone logo on the front and list of records on the back. Holds 15 records with ease and about 20 with a bit of effort.
Read more
 1 in stock $5.05
Cat: 688856 Rel: 23 Jul 18
 
Semi-modular lo-fi analogue desktop synthesiser
Notes: The Music From Outer Space Noise Toaster features a wide range VCO, white noise generator, cool low pass filter, simple VCA, AR envelope generator with repeat or manual triggering and a modulation LFO with Square, Integrated Square and Differentiated Square waves. Elettrorama have modded the original design which offers a full patchable control panel for creating sounds by setting the switches, cables required.

The MFOS NOISE TOASTER circuit consists of seven main components: a voltage-controlled oscillator (VCO), a white noise generator, a voltage controlled low pass filter (VCF), a low frequency oscillator (LFO), a simple AR envelope generator (AREG), a simple voltage controlled amplifier.

PLEASE NOTE: Comes with Euro 2-pin power supply
Read more
 8 in stock $190.28
Cat: 695368 Rel: 01 Aug 18
 
Angled 2 x 84 HP Eurorack case with PSU & power cord
Notes: Eowave Studio Cases are made of metal, with wooden side panels to give them a modern look. The case here is angled, and features two rows with 84 HP each. A power supply and Bus Boards are built-in.
Read more
 3 in stock $232.80
Cat: 695374 Rel: 10 Jul 18
 
Male 3.5mm TRS to Female 5 pin DIN
Notes: The MIDI adapter has a male 3.5mm TRS minijack at one end, and a female 5 pin DIN MIDI connector on the other, and is 22 cm/8.5" long.
Read more
 4 in stock $3.18
Cat: 686607 Rel: 23 Jul 18
 
Durable solid aluminium record adapter
Notes: Centre adapter for 7 inch records.
Read more
 More than 10 in stock $4.24
Cat: 686606 Rel: 23 Jul 18
 
Record stabiliser
Notes: High quality, heavyweight vinyl record stabiliser. Comes in a padded case.
Read more
 More than 10 in stock $31.88
Cat: 698450 Rel: 09 Aug 18
 
1 MIDI in to 12 MIDI thru
Notes: Receives MIDI data from a single MIDI OUT (e.g. sequencer or master keyboard) and produces identical copies at the 12 MIDI THRU sockets. These can then be connected to the MIDI IN of sound modules or other devices which require MIDI signals sent to them.

High quality Kenton MIDI Thru box with opto-isolated MIDI In and separate drive for each MIDI Out. Powered from a mains adapter so you can fit and forget.
Read more
 More than 10 in stock $119.06
Cat: 677269 Rel: 28 Jun 18
 
48V power supply for condenser microphones & other equipment
Notes: The M48 48v Phantom Power Supply allows you to use your devices and microphones that require external power in any setup. It can also provide an easy solution when the phantom power being supplied from a venue is inadequate. With the M48 you will always get a clean, full 48v of power for the best sound and low-noise performance. Perfect for home and professional studios, live sound, podcasters, content creators, and more.

Power Your Gear:
Perfect for all of your gear that requires Phantom Power like condenser mics.

No Nonsense:
With a single XLR input and XLR output, get connected quickly.

Stay Informed:
No guessing if it's working or how the battery life is doing. Dual LEDs let you know if it's on and if the battery is low.

Get All The Voltage:
Some "48v Phantom Power" supplies don't quite give you the full voltage you need. The M48 always delivers 48 Volts of clean power.

Power From The Wall or 9v Battery:
Choose AC adapter power or a battery for maximum flexibility especially when working on location.

'Built-Like-A-Tank':
Made from heavy gauge steel, the M48 is built to last and withstand years of punishment.
Read more
 1 in stock $48.89
Cat: 677268 Rel: 28 Jun 18
 
Professional cable tester, compatible with common connectors
Notes: The MTest-1 features a simple 5-way switch to test every pin, even with mismatched connectors, for all common connector types and more. Whether you have a few in your gig bag or multiple crates filled with cables, you don't want to be stuck in the middle of a performance when the last strand of wire gives out during a guitar solo or the vocal performance of a lifetime. What about troubleshooting a system? No problem. Powered by a 9v battery, the MTEST-1 can go with you when you explore beneath the stage or behind an imposing stack of speakers.

Connect All Your Favourites:
Male and female connectors for all the most commonly used types.

Any Combo of Connectors:
XLR to TRS? 1/8" to RCA? No problem! The MTEST-1 intelligently knows what you're plugging in and matches pins accordingly.

Signal Probes:
Don't see the connector you need? Just plug in the included probes and you can test continuity on virtually any cable or non-active circuit.

Visual Feedback:
Bright and easy-to-read LED readout tells you exactly which pins are working properly.

Battery Powered:
When you have some testing to do on the fly, you don't have time for an AC adapter. Just pop in a 9v battery and the MTEST-1 is good to go.

Built-Like-A-Tank:
The MTEST-1 is built to last and withstand years of use thanks to its road-worthy, steel construction, and long-wearing components.
Read more
 1 in stock $35.34
Cat: 691591 Rel: 18 Jul 18
 
Lightweight protective case for Akai MPC Touch & Live
Notes: The CTRL CASE MPC Live is specially designed to hold the Akai MPC Live or MPC Touch. Crafted from durable and lightweight Durashock moulded EVA foam and a water-rejecting polyester exterior, it is furthermore equipped with a removable (velcro) foam that provides extra protection for all encoders, knobs and buttons.

Fits: Akai MPC Live, Akai MPC Touch
Read more
 1 in stock $49.96
Cat: 691588 Rel: 16 Jul 18
 
Durable, lightweight case designed to hold the Rane Seventy Two
Notes: The CTRL Case Seventy-Two hardshell case is custom designed to a hold the new Rane Seventy-Two battle-mixer. Crafted from lightweight and rigid Durashock moulded EVA shell it's a very compact and protective carrying solution that fits easily into the overhead bin or under the seat of most airlines.
Read more
 1 in stock $81.85
Notes: The CTRL CASE XL II is a super lightweight and compact hard shell case, offering a safe and comfortable way to carry (incl. shoulder-strap) your NI Kontrol S4 or Denon MC6000 controller. Made of lightweight and rigid Durashock moulded EVA shell, the inside lid is lined with high density egg-crate foam to protect the displays, jog wheels, and controls.

Fits: Native Instruments Kontrol S5, Native Instruments Kontrol S4, Native Instruments Kontrol S2, Denon MC-4000, Denon MC-6000, Numark Mixdeck II, American Audio VMS4, Vestax VCI-400, Akai MPC Renaissance, Akai MPK 25, Gemini GV 2, Gemini Slate 4, Gemini Slate 2, Reloop Jockey 3 RMX
Read more
 1 in stock $55.81
Cat: 691590 Rel: 18 Jul 18
 
Durable, lightweight protective DJ controller case
Notes: The CTRL CASE XXL II is a super lightweight and compact hard shell case, offering a safe and comfortable way to carry (incl. shoulder-strap) your Reloop Beatmix 4Mk2 or Numark NS6 controller. Made of lightweight and rigid Durashock moulded EVA shell, the inside lid is lined with high density egg-crate foam to protect the displays, jog wheels, and controls.

Fits: Numark NS6, Numark N4, Numark iDJ Pro, Numark 4 Track, Pioneer XDJ-Aero, Reloop Beatmix 4 MK2, Reloop Terminal Mix 4
Read more
 1 in stock $60.59
Cat: 698908 Rel: 08 Aug 18
 
Lightweight case for your Numark controller
Notes: The CTRL Case NV2 is a super lightweight and compact carrying solution for your Numark NV2 Controller. The case is crafted from lightweight Durashock moulded EVA foam and water repellent polyester exterior. The lid is lined with high density egg-crate foam to protect the displays, jog wheels, and controls.

Fits: Numark NV, Numark NV2, Numark Mixtrack Pro 3, Numark Mixtrack Platinum
Read more
 1 in stock $59.52
Cat: 697937 Rel: 31 Jul 18
 
Premium quality turntable weight developed for club & home use - black
Notes: MasterSounds turntable weights are carefully designed to reduce a turntable's noise floor and thus improve the musical soundstage. Users enjoy improved bass response, tighter mids and controlled highs as the turntable weight reduces unwanted resonance when placed via the spindle on top of a record. These weights are just over 400 grams (+/- 14oz), light enough to not cause damage to a turntable's bearing system, but heavy enough to give sonic improvement.

The weights have been tested on a large variety of non-suspended belt drive and direct drive turntables with great success. Pressing plants try to achieve quality control on every record made, however there are intrinsic issues such as dished and warped records. MasterSounds turntable weights help to combat this too. DJ's love this, as it aids cueing a problematic a record prior to mixing and eliminates needle skip.

The weights have an anti-slip base, and thus each turntable weight has been designed to grip the record, which is fantastic for DJ'ing as it really stabilises records in the mix. Try using MasterSounds turntable weights for a couple of weeks, then remove to realise what a difference they make!
Read more
 7 in stock $53.15
Cat: 697938 Rel: 31 Jul 18
 
Premium quality turntable weight developed for club & home use - silver
Notes: MasterSounds turntable weights are carefully designed to reduce a turntable's noise floor and thus improve the musical soundstage. Users enjoy improved bass response, tighter mids and controlled highs as the turntable weight reduces unwanted resonance when placed via the spindle on top of a record. These weights are just over 400 grams (+/- 14oz), light enough to not cause damage to a turntable's bearing system, but heavy enough to give sonic improvement.

The weights have been tested on a large variety of non-suspended belt drive and direct drive turntables with great success. Pressing plants try to achieve quality control on every record made, however there are intrinsic issues such as dished and warped records. MasterSounds turntable weights help to combat this too. DJ's love this, as it aids cueing a problematic a record prior to mixing and eliminates needle skip.

The weights have an anti-slip base, and thus each turntable weight has been designed to grip the record, which is fantastic for DJ'ing as it really stabilises records in the mix. Try using MasterSounds turntable weights for a couple of weeks, then remove to realise what a difference they make!
Read more
 6 in stock $53.15
Cat: 697801 Rel: 27 Jul 18
 
16 Input Analogue Live & Studio Mixer with MIDAS Microphone Preamplifiers
Notes: The compact DM16 honours your stage or studio desktop space, while providing incredible sonic performance, amazing versatility and an unheard of level of affordability.

What is the secret behind DM16's superb, studio-quality sound? The DM16 features 12 award-winning, MIDAS microphone preamplifiers with true +48 V Phantom Power, acclaimed by audio engineers the world over for their transparency and nuanced low noise, high-headroom design. Add to this TRS Line Inputs on all 16 channels (8 mono and 2 stereo), mono channel Inserts and 3-band EQ with mid-frequency sweep, 2 switchable pre/post-fader aux sends, 2 monitor outs and 2-track RCA I/O, and you have an analogue work of art, the fully featured DM16!

With 16 channels, the DM16 has more than enough microphone and line inputs to manage a small band or worship team with channels to spare both on the stage and in the studio. It is also the ideal choice for use as a keyboard or drum sub-mixer for larger scale performances.

Line channels 13/14 - 15/16 are dedicated stereo channels, making them ideal for stereo instruments, such as keyboards and can also be used for mono signals thanks to a convenient balance control on each 2-channel grouping. These channels can also be used as return inputs for signals sent external effects processing equipment.

The British consoles of the 1960s and '70s changed the sound of rock and roll without them the British Invasion might not have happened. Those legendary mixing desks soon became the envy of engineers and producers all over the world. The 3-band channel EQ on our DM16 mixers is based on that very same circuitry, allowing you to imbue signals with incredible warmth and detailed musical character. The sweepable mid-frequency band provides a broad tonal palette with which to fine tune the ideal signal. Even when applied generously, these equalisers exhibit sweet forgiveness and superb audio quality.

The DM16 is also equipped with 2 aux sends with pre/post fader switching for added versatility. Users can select to use them for external effects processing, custom monitor mixes, or a combination of the two. Additional monitoring outputs are provided of the main mix for stage or studio monitor applications.
Read more
 2 in stock $295.50
Cat: 564332 Rel: 11 Jul 18
 
Intuitive 12-track Matrix Sequencer for MIDI production & live performing
Notes: The SEQ12 is a MIDI Matrix Sequencer (in a console housing) and offers one MIDI Input and three MIDI Outputs. It gives access to 12 tracks and you are able to choose between three track types: drum, chord and monophone. Each track has 2 or 3 controller tracks, routing on MIDI outputs and MIDI channel adjustable. Also, each track has 16 patterns, these can be played in freely programmable sequences one behind the other. Each pattern has its own shuffle pattern, 2 to 3 controller tracks and additional ratchet modes with programmable pitch and trigger patterns.

The product can record MIDI notes and controller values via MIDI In and the data can be edited using the LED buttons. There are 32 memory slots in the device and it has a very stable and accurate timing.

Seq Mode:

The MIDI data are displayed in dedicated views on the LED button matrix.

There are 3 selectable track types:

- Type monophonic sends note, velocity, note length, controller 1,2,3
- Type chord sends note, velocity, note length, controller 1,2, chord
- Type drum sends to 12 subtracks freely definable notes with adjustable velocity, accented notes, controller 1.2

Each sequence has a freely adjustable shuffle pattern and clock divider. This also triplets, etc. are possible for each sequence, the nonlinear mode can be activated with different multiple trigger patterns and clock dividers per step. Shortest possible grade: 1/32.

Automatic smoothing of controller values can be activated. Free choice of midi channel and exit per track.

Song Mode:

Each track can play their sequences in a given order (Chain). There are 8 parts (stanza, chorus, bridge etc) with 12 tracks each for the tracks.
Read more
 1 in stock $926.94
Cat: 693159 Rel: 27 Jul 18
 
Multi power supply for effects units
Notes: The MACRO POWER S12 from MOOER is a high output professional pedalboard power supply.

Sporting 2 toroidal transformers and 12 completely independent outputs the MACRO S12 can deliver up to 3.4 Amps (3400mA) of clean, quiet and consistent DC power for all of your pedal power needs.

- 6 x 200mA 9V outputs for all your favourite analogue pedals
- 3 x 300mA 9V outputs for your preamps and digital pedals
- 1 x 300mA output with selectable voltage (9V, 12V, 15V, 18V)
- 2 x 500mA 9V outputs for powering your current hungry monster pedals
- Switchable input voltage for use in different regions across the globe

All of this is crammed into a tour ready metal housing and comes packaged with all the cables you need to get up and running.
Read more
 1 in stock $131.81
Cat: 691778 Rel: 25 Jun 18
 
High quality plywood vinyl record storage box with carved Mukatsuku Records logo
Notes: Juno exclusive bespoke heavy duty black laminated plywood 45 record box with dovetail joints. Box features carved Mukatsuku logo to the front and 2 sides with chamfered carry handles.

- Holds roughly 175 x 7'' singles
- Length approx 46.5 cm x 22cm
- Width x Height 18 cm
- Comes with additional stickers & laser-etched steel 45 adapter
Read more
 3 in stock $53.14
Cat: 693246 Rel: 18 Jul 18
 
High quality plywood vinyl record storage box with carved Mukatsuku Records logo
Notes: Juno exclusive bespoke heavy duty dark brown laminated plywood 45 record box with dovetail joints. Box features carved Mukatsuku logo to the front and 2 sides with chamfered carry handles.

- Holds roughly 175 x 7'' singles
- Length approx 46.5 cm x 22cm
- Width x Height 18 cm
- Comes with additional stickers & laser-etched steel 45 adapter
Read more
 2 in stock $53.14
Cat: 693047 Rel: 26 Jun 18
 
Mukatsuku branded wooden 45 adapter
Notes: Wooden adapter for playing dinked 45's with laser-etched Mukatsuku logo and rays. Comes with free sticker.
Read more
 2 in stock $4.77
Cat: 693049 Rel: 18 Jul 18
 
Mukatsuku Records branded wooden 45 adapter
Notes: Wooden adapter for playing dinked 45's with laser-etched Mukatsuku Records logo and rays. Comes with free sticker.
Read more
 2 in stock $4.77
Cat: 694973 Rel: 25 Jul 18
 
49 note 2nd generation synth-action keyboard with performance controls designed to improve your workflow
Notes: Panorama T4 is the first controller to deliver Nektar-level instrument plugin control in any VST/AU compatible DAW. Load patches directly from the keyboard and start controlling parameters immediately, with every change instantly visible on the LED display. Control any instrument plugin with one of the many included maps or customize and create your own. Discover new performance tools like the powerful chord, hold and note repeat functions. Tweak repeat parameters, plugin parameters and record it all in your DAW. Panorama T4 connects to most DAWs delivering track navigation, mixer and transport control with either Nektar DAW integration or MCU compatibility. Experience the unsurpassed integration of Panorama T4!

2nd Gen Panorama Keybed:

Panorama T4 features a 2nd generation Panorama synth-action keybed. Dampened and carefully balanced across the keyboard with medium tension, which means the activation force required is in the middle of the range established for professional keyboards. Five velocity curves shift the emphasis from soft to hard, giving enough choice to cater for any playing style. A fixed option enables velocity values to be set by controls, including the wheels.

The 2nd Gen Panorama keybed is our most expressive keybed yet and features the AfterTouch strip: Easily triggered and controlled, AfterTouch makes it possible to dynamically alter tone or volume by gently applying just a bit of pressure.

Beats on tap:

Designed with finger drumming in mind, Panorama T4's 8 large velocity and pressure sensitive pads are the perfect tool for beat creation. Triggering at an extremely low threshold, they will capture ghost notes and flams as easily as you can play them. If the factory settings are not expressive enough for you, it's even possible to calibrate each pad individually for optimum performance.

Each pad can be assigned any MIDI note number or MIDI CC message for use as MIDI trigger or toggle buttons - and assigning sounds couldn't be easier: Activate Pad Learn, select a pad, play the required note or drum sound on the keyboard and assignment is done. A Pad Bank Button left to the pads gives you access to another 8 pads, for a total of 16 pads within a pad map. 8 such pad maps are available for recall at any time.

Key and pad repeat:

Located just above the wheels are the Key Repeat and Pad Repeat buttons. Press to activate the repeat function and notes will be repeated at the set rate. Change the rate in real-time from 1/4 - 1/96 note values, change the tempo, add some swing and set an accent interval.

Repeat settings for pads and keys are independent of each other, so one can be set for the drum beat and the other for an instrumentation part. The Repeat's trigger mode can be set to repeat from the point of playing a note or to sync with the beat. Clock source can either be internal or external MIDI clock.

Access all areas:

Nine 30mm faders, 8 assignable LED buttons and 8 encoders are at the centre of the T-series' control panel. Each control is fully programmable to send any MIDI CC message for use with hardware or software MIDI products.

When used with Nektar DAW integration or Nektarine, the controls provide flexible pre-mapped DAW- or plugin-control, giving you deep tactile control right from the hardware. The DAW integration files also contain automatic catch-up and soft-takeover functions to avoid parameter jumping when you switch between devices.

Instant feedback:

The custom LCD display provides crisp and clear feedback for all your settings: Here is where you select Panorama's different modes, access global parameters and navigate your software. With DAW Integration and Nektarine, you will even see your software's mixer and plugin parameters right there.

The 4 soft buttons below the display will change their function according to the selected menu for fast access. The 4 mode buttons to the right of the display allow you to change from internal mode to DAW or plugin control at the touch of a button. The Multi button is reserved for Nektarine.

Bitwig 8-track included:

Bitwig 8-Track is included with every Panorama T4. So you can start producing, performing, and designing sounds like a pro from day one. Bitwig 8-Track gives you access to over 50 software instruments and effects for use on up to 8 audio or MIDI project tracks, and you can use any 3rd party VST plug-ins you might own, too. The 'Bitwig Essentials Package', a highly versatile handpicked selection of loops, clips and samples, is also included to help you get started. So put all that together and you have a powerful sketchpad for your musical ideas featuring the acclaimed workflow of Bitwig Studio.
Read more
 3 in stock $217.62
Cat: 694965 Rel: 25 Jul 18
 
61 note 2nd generation synth-action keyboard with performance controls designed to improve your workflow
Notes: Panorama T6 is the first controller to deliver Nektar-level instrument plugin control in any VST/AU compatible DAW. Load patches directly from the keyboard and start controlling parameters immediately, with every change instantly visible on the LED display. Control any instrument plugin with one of the many included maps or customize and create your own. Discover new performance tools like the powerful chord, hold and note repeat functions. Tweak repeat parameters, plugin parameters and record it all in your DAW. Panorama T6 connects to most DAWs delivering track navigation, mixer and transport control with either Nektar DAW integration or MCU compatibility. Experience the unsurpassed integration of Panorama T6!

2nd Gen Panorama Keybed:

Panorama T6 features a 2nd generation Panorama synth-action keybed. Dampened and carefully balanced across the keyboard with medium tension, which means the activation force required is in the middle of the range established for professional keyboards. Five velocity curves shift the emphasis from soft to hard, giving enough choice to cater for any playing style. A fixed option enables velocity values to be set by controls, including the wheels.

The 2nd Gen Panorama keybed is our most expressive keybed yet and features the AfterTouch strip: Easily triggered and controlled, AfterTouch makes it possible to dynamically alter tone or volume by gently applying just a bit of pressure.

Beats on tap:

Designed with finger drumming in mind, Panorama T6's 8 large velocity and pressure sensitive pads are the perfect tool for beat creation. Triggering at an extremely low threshold, they will capture ghost notes and flams as easily as you can play them. If the factory settings are not expressive enough for you, it's even possible to calibrate each pad individually for optimum performance.

Each pad can be assigned any MIDI note number or MIDI CC message for use as MIDI trigger or toggle buttons - and assigning sounds couldn't be easier: Activate Pad Learn, select a pad, play the required note or drum sound on the keyboard and assignment is done. A Pad Bank Button left to the pads gives you access to another 8 pads, for a total of 16 pads within a pad map. 8 such pad maps are available for recall at any time.

Key and pad repeat:

Located just above the wheels are the Key Repeat and Pad Repeat buttons. Press to activate the repeat function and notes will be repeated at the set rate. Change the rate in real-time from 1/4 - 1/96 note values, change the tempo, add some swing and set an accent interval.

Repeat settings for pads and keys are independent of each other, so one can be set for the drum beat and the other for an instrumentation part. The Repeat's trigger mode can be set to repeat from the point of playing a note or to sync with the beat. Clock source can either be internal or external MIDI clock.

Access all areas:

Nine 30mm faders, 8 assignable LED buttons and 8 encoders are at the centre of the T-series' control panel. Each control is fully programmable to send any MIDI CC message for use with hardware or software MIDI products.

When used with Nektar DAW integration or Nektarine, the controls provide flexible pre-mapped DAW- or plugin-control, giving you deep tactile control right from the hardware. The DAW integration files also contain automatic catch-up and soft-takeover functions to avoid parameter jumping when you switch between devices.

Instant feedback:

The custom LCD display provides crisp and clear feedback for all your settings: Here is where you select Panorama's different modes, access global parameters and navigate your software. With DAW Integration and Nektarine, you will even see your software's mixer and plugin parameters right there.

The 4 soft buttons below the display will change their function according to the selected menu for fast access. The 4 mode buttons to the right of the display allow you to change from internal mode to DAW or plugin control at the touch of a button. The Multi button is reserved for Nektarine.

Bitwig 8-track included:

Bitwig 8-Track is included with every Panorama T6. So you can start producing, performing, and designing sounds like a pro from day one. Bitwig 8-Track gives you access to over 50 software instruments and effects for use on up to 8 audio or MIDI project tracks, and you can use any 3rd party VST plug-ins you might own, too. The 'Bitwig Essentials Package', a highly versatile handpicked selection of loops, clips and samples, is also included to help you get started. So put all that together and you have a powerful sketchpad for your musical ideas featuring the acclaimed workflow of Bitwig Studio.
Read more
 4 in stock $319.96
Cat: 694941 Rel: 06 Jul 18
 
Lightweight 2-channel DJ controller designed for rekordbox DJ software
Notes: Learning to DJ has never been easier than with the DDJ-400 2-channel DJ controller for rekordbox dj. Packed with features to help you comfortably develop your skills, this controller's layout mirrors that of our flagship NXS2 set-up, with shared elements like dedicated cue buttons, Beat FX, CDJ-style looping controls and more. As a result, our advanced DJ gear will feel natural to use when you're ready to progress.

Bundled with our professional performance software, rekordbox dj, its compatible Tutorial feature will help you master this controller's creative capabilities. Lightweight and portable, take the DDJ-400 with you to practice sessions or parties. You'll soon feel at home while performing.

Tutorials:
You'll have access to rekordbox dj's Tutorial feature. Follow along via your computer screen to learn how to use the gear and master DJ techniques.

Club-style layout:
The DDJ-400's buttons and knobs are arranged in the same way as those on our professional NXS2 set-up. Develop your skills using an interface similar to that of our club-standard player, and enhance your mixes with Sound Colour FX and Beat FX featuring curves taken from our DJM-900NXS2 mixer. You'll soon feel comfortable performing in DJ booths.

Beat FX:
Apply professional FX that match the tempo of the track that's currently playing by using the Beat FX feature. This will help you craft unique sets even if you're just starting out.

Rekordbox DJ:
You get a rekordbox dj licence key bundled with this controller. Simply activate your licence key for our DJ software, connect the controller and start DJing.

PC Master Out:
For flexibility you can choose to hear your mix through your computer's internal speakers or connected desktop speakers. At the same time, you can use your headphones to cue independently of the master out.

Plug and play:
With a built-in sound card, simply connect the controller to your computer using the provided USB cable to power up and begin playing.
Read more
 2 in stock $264.69
Cat: 677576 Rel: 03 Jul 18
 
Compact, desktop monophonic synthesiser featuring a pre-tuned analogue oscillator
Notes: A Love Letter to the Analogue Monosynth:

A modern, semi-modular synthesiser inspired by the instruments designed by our heroes. The Pittsburgh Modular Microvolt 3900 takes a new approach to building a raw, analogue monosynth with a host of unconventional and inspirational features. Patch cables optional.

Creative Synthesis Design:

With our new temperature stabilized, dual VCA oscillator core, the analogue audio engine of the Microvolt 3900 feeds a set of timbral waveshapers crafted for deep harmonic shaping, enabling a layer of additive synthesis alongside the classic subtractive synthesis waveforms. Waveforms are fed into our binary filter, a custom state variable filter architecture offering near infinite resonance with or without self-oscillation. Sonically this creates a juicy, fluid filter adding depth and energy to the oscillator that can scream if you ask it to.

The heart of the Microvolt 3900's sound is our new dynamic VCA technology. Where a standard VCA works in two dimensions, the Microvolt 3900 dynamic VCA technology adds a third dimension. As the dynamic VCA closes, decreasing the amplitude, harmonics are removed from the source. As the dynamic VCA opens, the harmonics are restored. This mimics the behaviour of sounds in nature. The result is a lively, organic sounding synthesiser full of energy. The design of the dynamic VCA also allows the instrument to be plucked or struck, opening up another set of percussive musical possibilities.

Open Electronic Experimentation:

The Microvolt 3900 is patched internally and does not require patch cables to dial in a wide variety of unique and powerful sounds. For deeper experimentation, the Microvolt 3900 includes a 39-point Eurorack format friendly 1/8" jack patchbay for complete signal routing control over a full complement of audio and modulation options. A four-stage envelope generator, multi-purpose function generator, wide range LFO, chaotic random source, arpeggiator, sequencer, and MIDI to CV control are also available to create dynamic sounds unique to the Microvolt 3900.

Includes:

- 5 Nazca Audio brand patch cables
- MIDI connector cable
- Universal DC power adapter
Read more
 5 in stock $587.84
Cat: 685229 Rel: 16 Jul 18
 
Professional over-ear monitoring headphones
Notes: When you need to do serious work without bothering anyone in your living space and without being distracted by outside sound, choose PreSonus HD9 headphones. They're clean-sounding, extra-comfortable, and offer a broad, transparent frequency response that ensures accurate mixing.

The HD9's closed-back acoustic design provides superior listening isolation and reduces headphone bleed, so you hear nothing but music - and your housemates hear nothing at all.

The HD9's 45 mm dynamic, neodymium drivers and high-power handling (900 mW per channel into 40 ohms) deliver loud, clear, clean audio, minimizing listening fatigue. Best of all, its tailored frequency response extends all the way from 10 Hz to 26 kHz, with accurate bass response, enabling precise mixes.

The lightweight HD9 features an adjustable headband, cups that rotate 180 degrees on two axes, and comfortable, durable ear pads. The straight, ten-foot cable drops down one side so it doesn't get in your way. The result is a comfortable listening experience that you'll continue to enjoy during long sessions. And the HD9 is built tough so you can rely on it wherever your travels take you.

The PreSonus HD9's are an invaluable addition to your sonic toolbox. While there will always be a place in the studio for powerful and articulate studio monitors, fact is that more people are choosing portable, personal listening solutions nowadays. As trends in listening shift, it's wise for you to check your mixes on high-quality headphones as well as on your finely calibrated studio monitors. With the HD9's, you can rest assured that your mixes are translating well across myriad listening environments.

And with the HD9's combination of comfort, adjustability, sturdy construction, and acoustic isolation, you can mix better for longer.
Read more
 1 in stock $85.74
Artikel 1 bis 50 von 3,934 auf Seite 1 von 79 anzeigen
1  2  3  ...  77  78  79  »

Filter

Eight Weeks: All Genres
Monthly payment
Number of monthly payments
Cash price
Deposit to pay
Loan amount
Loan repayment
Cost of loan
Total amount payable

Only available to UK residents over 18, subject to terms and conditions. More info here.

These rates of finance are based on this specific product and can be applied for once this item has been added to the cart. Adding other products to your cart may change the rate of finance or deposit required.

Checkout and apply for finance now
Close