Juno Daily

Music and tech news, interviews, features, reviews and more.

Visit Juno Daily

100% Sicheres Einkaufen

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Sicheres Einkaufen

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices. Visit Juno DJ

vinyl bestsellers
USD
Meine Sprache
Meine Währung
Your wishlist is empty
Items in wishlist:
Recently added:
Loading...
Cart
Dein Warenkorb ist leer.
Items in cart:
Zwischensumme:
Recently added:
Loading...
Warenkorb anzeigen
Startseite  Preorders  Studio Equipment  Studio Equipment
Subscribe here to receive our weekly roundup of the latest studio equipment products

Filter

Studio Equipment preorders

Welcome to our preorders page, where you can preorder vinyl & CDs due for release in the coming weeks and months.

All preorders are despatched as soon as they released, and you don't pay until they ship!
Artikel 1 bis 50 von 156 auf Seite 1 von 4 anzeigen
1  2  3  4  »
FORTHCOMING
SoMa Laboratory Terra Polyphonic Microtonal Synthesiser (light oak)
Cat: 951312
 
A complex polyphonic, microtonal synthesiser with a broad and flexible sound palette.
Notes: TERRA is a new SOMA Labs synth that is currently in development.

TERRA is a highly conceptual device. The core idea is unity of nature and technology, and a perfect balance between simplicity and versatility. Behind the extremely simple interface hides a complex polyphonic, microtonal synthesizer with a broad and flexible sound palette that ranges from classical beautiful tones to complex atonal noise, and offers smooth and fast transitions between these extremes.

The innovative keyboard design invites new playing techniques and covers the full range of a grand piano with the possibility to tune each note with an accuracy of 125 steps per semitone. To achieve this range with such a simple keyboard we designed a unique system of pitch shifting using four additional sensors. Pressing different combinations of them will result in 16 variations of keyboard transposing, including up to 3 octaves up and down, fifth, fourth, third, tone etc.

Not only do you get the full range of a grand piano in a very compact design, TERRA also offers an entirely new and different approach to playing melodies and chords.

The keyboard consists of 12-note sensors with velocity and pressure sensitivity allowing for the manual creation of slow attack and vibrato, 4 dynamic sensors for timbre modification and control, 4 pitch-shifting sensors and 2 hold sensors for holding the state of the timbre and note sensors.

Inside TERRA there is a three-axis motion sensor for creating a variety of different modulations by simple intuitive movements of your hands and body.

TERRA is digital and contains 32 complex synthesis algorithms. Each algorithm has been carefully designed to be a complete and flexible musical instrument on its own, ready for learning and playing in its own unique way. The goal is to free the musician from long exhausting programming, setting hundreds of parameters for creating one timbre, and instead putting the focus directly on music and performance and following your imagination and inspiration.

TERRA offers the best of both worlds: the direct intuitive tactile connection from acoustic instruments and the flexibility and versatility of synthesizers. TERRA inherits design principles from LYRA-8 and also contains application of the new principles that were announced for ReFLEX, exploring the future of synthesis.

TERRA has an extremely simple interface that gives you instant access to all its functions in several touches, including saving and loading the 96 presets that are stored directly on the playing sensors. TERRA has no display. Instead it shows and lets you dial all necessary data on the 6 LED-sensor triangle in the centre.

TERRA has a built-in FX processor so the stereo output is ready to use, making it a perfect stand-alone performance instrument. While the sound generation is digital, TERRA has a unique custom-built and top quality analogue part that makes it sound rich, natural, clear and powerful at the same time.

The housing of TERRA comes from a solid piece of wood, making each instrument unique and slightly different. In the photo above and in the announcement demo video you can see the prototype of the synth. The final design is in development and we intend to make several different versions.

TERRA is a sanctuary for a natural soul right in the middle of the rumbling plastic world, a ground where you can breathe in and out slowly, and hold on to your roots.

TERRA is our dream about a bright future where we will be both technologically advanced and more connected to nature, where machines and technology are not a prison for our feelings and spirit but their extension.

Synthesis algorithms: 32
Polyphony: 1-12 voices (depending on the algorithm)
Presets: 96
Pitch Shifter presets: 24
Line out: L, R TS/TRS 1/4-inch jacks / 6.35 mm jacks
Maximum line output signal: 13 V peak-to-peak
Nominal line output signal: ~1.5 V (volume 100%)
Headphone output: TRS 1/4 inch jack / 6.35 mm jacks
Headphones impedance: 6-64 ohm
CV-clock input voltage: 3-15 V
Power supply voltage: DC 12 V *
Consumption current: 0.2 A
DC jack: 5.5 x 2.1 mm, "+" in center
Dimensions: 405 x 365 x 57 mm
Weight: 2.2 kg
* TERRA comes with a high quality power supply . If it gets lost, use a high-quality modern switched-mode power supply with 12 V output voltage, at least 0.4 A maximum current, 5.5 x 2.1 mm DC jack, center "+".

What's included:

TERRA - 1 pc.
Power supply - 1 pc.
CV clock adapter (DIN5 - 3.5 mm mini-jack) - 1pc.
Short interface reference manual - 1 pc.
On-table mounting pads - 4 pcs.
Read more
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
coming soon $1,420.32
(No payment required now - pay when released)
FORTHCOMING
Torso Electronics S-4 4-Track Sculpting Sampler
Cat: 992942 Rel: 31 May 24
 
4-track sculpting sampler
Notes: Explore malleable sound. Mold, carve, bend.

The S-4 is a sculpting sampler designed to capture and transform sounds. Merging tape-era workflows with cutting-edge technology, the S-4 redefines sound mangling by providing a futuristic platform for crafting unique soundscapes and compositions, using samples and real-time audio processing.

S-4 is a tool made for sonic explorers. It has four parallel stereo tracks, each with an audio engine featuring a chain of audio devices including samplers, live granular processing, morphing resonators, and a range of audio effects. A novel modulation system allows anything and everything to be modulated with four modulators per track. Capture sounds on the fly with the onboard microphone and stereo line input, or load samples from the 4GB internal flash storage.

Use cases

The S-4 is a versatile powerhouse, capable of serving as an effects processor, transformative sound designer, tape machine, live looper, classic sample player, or textural synthesizer.

Tape machine

Capture your surroundings. Use S-4 as a transformative four-track tape machine.

Effect processor

Manipulate live audio, and add colour and textures to your beats, melodies, and sounds

Midi controlled sampler

Hook up a MIDI keyboard or sequencer and use S-4 as a powerful textural synthesizer and sample player.

Audio engine

Push the creative boundaries and transform audio into uncharted depths. S-4 has four parallel stereo tracks, each of which contains a chain of five audio devices tailored to cover specific sonic areas and applications. Create everything from glittering textures to broken soundscapes or evolving synth sounds.

Together, the devices form a playful toolbox for sculpting sample material and live audio.

Material

Stereo tape and sample players with live audio and looping capabilities.

Granular

Live granular processing with time-warping and pitch-shifting algorithms.

Filter

Morphing resonator: 48-band tuned filter bank with animation, tonal control, and classic filter functions.

Colour

Collection of destructive effects including bit crushing, drive, and compression.

Space

Combined reverb and delay with pitch-shifting and shimmer.

Modulation system

Animate and bring life to any parameter using the rich and unique modulation system. Each track has four configurable modulators that can be mapped to any parameter with unlimited mapping destinations. It is even possible to do cross-modulation between modulators. Choose between a range of different modulators from complex LFOs, and generative sequencers to envelopes.

Capture your surroundings

Utilize the built-in microphone to record sounds, sample and loop your external gear with the stereo line input, resample the internal tracks, or effortlessly load samples from the S-4's flash memory or an external drive.

Versatile powerhouse

The S-4 is designed with durable RGB buttons offering tactile feedback and a high-quality 3.5-inch LCD display ensuring all the visual feedback you need. It features USB connectivity for seamless connection to class-compliant devices and effortless file transfers to and from your laptop. Moreover, it can function as an audio interface when you require a simplified setup. You can also expand the number of inputs and outputs by connecting a class-compliant external USB interface.

Technical specifications

Audio engine features

4 parallel stereo audio tracks
Tape player with live looping capabilities
Polyphonic sample player
Live granular processing with time-warping and pitch-shifting algorithms
Morphing resonator (48-band filter bank)
Bit crushing, drive, and compression
Combined reverb and delay with pitch-shifting and shimmer

Modulation features

4 modulators per track
Modulate any parameter of the audio engine
Modulator types:
- Complex LFOs
- Generative sequencing tools
- Envelopes

Hardware

Quad-core 1.5 GHz processor
4 GB flash memory (sample pool)
24-bit / 48 kHz stereo audio in and out

I/O

2 line-inputs
2 line-outputs
Built-in microphone
Stereo headphone output
MIDI in/out
Analog sync in/out
USB-C

Miscellaneous

WiFi - Ableton Link
Class-compliant USB audio interface
Expandable number of inputs/outputs with class-compliant USB interfaces

User Interface

High-resolution LCD colour display, 3.5 inch
21 tactile RGB buttons
9 high-quality endless encoders

Physical

Matte black aluminium casing
Dimensions: 242 x 156 x 39 mm (9.5" x 6.1" x 1.5")
Weight: 820g (1.8 lbs)
Read more
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
est. release 31 May 24 $776.16
(No payment required now - pay when released)
FORTHCOMING
Xaoc Devices Poti II 1974 Batumi II Expander Module
Cat: 979277
 
Expander module for Batumi II - 4HP
Notes: Poti II expander notable features:

- per-channel input and output attenuation for the SINE and ASSGN outputs
- per-channel shape modulation with switchable destination (wave folding, shape switching, PWM)
- stores settings during a power cycle
- LED indication of the discrepancy between the stored setting and current pot position
- 4HP
- +10/-0mA from Batumi II

Read more
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
coming soon $81.32
(No payment required now - pay when released)
FORTHCOMING
Nava Extra9 Rhythm Composer Drum Machine
Cat: 973375
 
The clone of the Roland TR-909 who reproduces the sound of the original drum machine, the groove of the sequencer, the shuffle parameter is fully implemented.
Notes: Nava 909 with extra 9 expansion

The NAVA 909 is the only real clone of the Roland TR-909 who reproduce perfectly the sound of the original drum machine, even the sequencer has the same groove, the shuffle parameter is fully implemented.

It has a MIDI interface, Roland Dyn Sync, trigger out, just like the original model.

It replicates so well the sound to the point that it is no more a clone, but an exact replica!

The circuits are 100% analogic and identical to the TR-909 from Roland.

Over 1000 electronic components are soldered by hand.

It contains the exact same ROM samples (Ride, Crash Cymbals and hi-hats).

It sounds and feel like a Roland TR-909, but it's even better as all the components are new, where the old real TR-909 has most of its components that are tired and often leading to sound problems.

On the top of that, it has a LCD screen and comes with an upgradeable firmware.

NAVA 909 Specs:

128 Rhythm patterns from 1 to 16 steps
"All the sounds generated from from the original Roland TR909 analogue synth: BD, SD, LT, MT, HT, RS, HC & CH
16 tracks of 999 measures
1 external instrument track by pattern that can store 99 notes like SH101 sequencer style.
A Midi keyboard mode allow you to play external Midi device
Multi out for each instruments
Individual accent for BD, SD, LT, MT, HT, RS, HC and CH
A total accent track
Master out (L/R Mono) 6Vp-p 1Kohm
Tempo 30 - 250 Bpm
7 shuffle levels
4 scales (1/8t, 1/16, 1/16t and 1/32)
4 sequencer directions (forward, backward, ping-pong and random)
Easy copy and paste pattern function
Shift left or right the entire pattern or individual instrument
In/Out/Thru Midi
DinSync 24ppqn Out
Trig Out 2ms +5V
And More...

What's in the box
1 x NAVA 909 (V1.02 board)
1 x NAVA 909 Manual (English)
1 x 15V 1000MA PSU
Read more
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
coming soon $1,868.07
(No payment required now - pay when released)
FORTHCOMING
Elta Music Solar 42 Microtonal Polyphonic Ambient Machine Semi-Modular Analogue Synthesiser (black)
Cat: 996647 Rel: 30 Apr 24
 
Microtonal polyphonic ambient machine semi-modular analogue synthesiser
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
est. release 30 Apr 24 $1,963.11
(No payment required now - pay when released)
FORTHCOMING
Plum Audio ADVA Smart Multimode Filter Module (black)
Plum Audio ADVA Smart Multimode Filter Module (black) (distortion/filter/noise/VCA synth module)
Cat: 970492
 
24dB analogue multimode filter module with VCA, white noise generator, pre and post-distortions and a smart interface - 6HP.
Notes: ADVA is a fat-sounding 24dB ANALOGUE MULTIMODE FILTER packed with features including a VCA, white noise generator, pre and post-distortions and a smart interface that makes it a versatile beast in a surprisingly small package.

With 7 filter modes, ADVA provides high richness and a wide variety of tones; it can filter gently like an LPG or it can be pushed up to the edges of hot acid tones.

Unlike many other multimode filters, a phase keeper ensures that ADVA never inverts the input's phase in any of its filter modes.

Self-Oscillation is available for all modes, producing a range of waves from clean sine waves up to soft square waves when activating the post-distortion circuit. Together with V/OCT tracking, ADVA works brilliantly as an oscillator or as a percussive sound generator.

A resonance loudness compensation circuit ensures that ADVA does not compromise on volume when the resonance is increased.

An Internal analogue white noise generator is the little bit of spice that can make the world of difference. Blend it together with the input signal by rotating the dedicated knob to add more richness to your sound and further emphasize cutoff movements, or use it as an FM source to achieve the different flavors of dirty tones.

ADVA is packed with two separate distortion circuits. First, the soft-clipping overdrive is located in the sound path after the white noise blend knob and the input gain knob, a circuit which can push the incoming signal to thicken any waveform. If you blend the input with the noise generator it can compress the noise and exaggerate it to achieve more aggressive levels.

The second (post) distortion is located after the VCA, just before the output. This is a more aggressive distortion and can be used for acid and other dirty hot tones.

Although the sound path is completely analogue, ADVA has a digital support circuit that enables a smart routing system with the option to modulate filter modes via CV, and a very intuitive interface that includes 3 CLICKKNOBS and an RGB LED ring that provides visual feedback for whatever state the filter is in.

Dimensions
6 HP
35 mm deep

Current Draw
110 mA +12V
5 mA -12V
Read more
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
coming soon $298.84
(No payment required now - pay when released)
FORTHCOMING
PWM Mantis 37-Key Duophonic Hybrid Analogue Synthesiser
Cat: 944640 Rel: 30 Apr 24
 
A unique duophonic hybrid-analogue synthesiser with dual filter, patches and full USB-C MIDI Control.
Notes: Mantis is a unique, duophonic hybrid synthesizer that was co-developed by the late Chris Huggett (of EDP Wasp, OScar & more fame) and is dubbed as a spiritual successor to the OSCar, sporting precision digital oscillators, dual state variable filters and more.

Mantis is a premium synthesizer, sporting a high quality 37-note velocity and pressure sensitive keybed, SSI2164 IC's for the VCF's and VCA's, custom high performance processors for the oscillators coupled with a pristine analogue signal path, which features a twice amplified gain structure for maximum clipping capabilities plus lush stereo digital FX.

The modulation capabilities are vast with:
Two unique ADSR's that feature "sustain fall" that allows you to create a drop before release...even while a key is held for greater sound design possibilities. The envelopes can also be set to cycle.
Two tempo-syncable LFO's with four waves, fade in and fade out parameters and a seriously wide operating range.
Ring modulation available at the mixer
And a unique modulation routing controller with 6 choices of modulation parameters, 6 choices of modulation sources and scale control, which used to scale the effect of the modulation.

In development over the last period of his life Chris threw everything into Mantis. Although incomplete when he sadly passed away in 2020, he handed the project over to Paul of PWM to carry on and continue the project.

PWM, with the support of Chris' estate, think this synthesiser deserves to be born into the world for everyone to enjoy!

PWM MANTIS Key Features:
Hybrid-Analogue Synthesiser, powerful digital oscillators with dual analogue filters
With Mathematically Generated Oscillators with a Pure Analogue Signal Path
A Modernised Design Architecture based on the WASP with an OSCar style filter designed by the late, great Chris Huggett
Duophonic - Two Fully Independent Voices each with 2 Oscillators plus Sub-Oscillator per voice
Dual Filters - Multi-Mode State Variable VCF's with Overdrive per voice that can be combined in Series or Parallel with Width Control
Keyboard - 37-Note Full-Size Semi-Weighted Keybed with Aftertouch plus Joystick
Fully featured Keyboard, Joystick and USB-MIDI Control for Easy Integration with any Studio or Live Environment
Read more
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
est. release 30 Apr 24 $1,424.55
(No payment required now - pay when released)
FORTHCOMING
System80 810 MK2 Subtractive Analogue Voice Module
System80 810 MK2 Subtractive Analogue Voice Module (filter/mixer/oscillator/synth voice/VCA synth module)
Cat: 964068
 
3-in-1 subtractive analogue voice module - 30HP.
Notes: 3-in-1 Subtractive Analogue Voice Module

Overview

The System80 810 MK2 is a 30 HP Eurorack module consisting of a high quality subtractive analogue synthesizer voice: Voltage Controlled Oscillator (VCO), Voltage Controlled Filter (VCF), and Voltage Controlled Amplifier (VCA). More than just a clone, the design of each sub-module is inspired by the golden age of Japanese analogue, featuring elements of the System 700, System 100m, and the Jupiter-8. Add some modulation and an envelope generator to create a complete patchable analogue voice with a distinctly vintage character.

VCO
* Discrete Voltage Controlled Oscillator with temperature compensated exponential converter
* 1 V/octave tracking over 7-8 octaves
* Sync input with weak and strong oscillator sync modes
* 1 V/octave CV input + two attenuated exponential CV inputs for pitch/frequency modulation
* Six position octave range switch
* Selectable waveform output: Pulse, Ramp, Triangle, or Sine
* Pulse Width Modulation CV input
* Sub-oscillator

VCF
* Cascaded OTA design inspired by classic Roland topologies with selectable 12 or 24 dB response
* self-oscillating with 1 V/octave tracking (3-4 octaves, normalized to VCO KYBD CV input)
* VCO output and sub-oscillator normalized to two log attenuated inputs
* Two frequency CV inputs, one unipolar and one bipolar
* Voltage controlled resonance

VCA
* Traditional single OTA design
* Three log attenuated audio inputs with IN 1 normalized to VCF output
* Two CV inputs with selectable exponential or linear response

Updates to the MK2 version
* Solid-state octave switching
* Memory recall of waveform selection
* Steel back cover

Dimensions
30 HP
30 mm deep

Current Draw
60 mA +12V
50 mA -12V
Read more
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
coming soon $453.02
(No payment required now - pay when released)
FORTHCOMING
Folktek Resonant Garden Electronic-Acoustic Hybrid Instrument
Cat: 983105 Rel: 29 Feb 24
 
Electronic-acoustic hybrid instrument
Notes: The Resonant Garden is an electronic-acoustic hybrid instrument designed to create anything from beats and oddities to dense soundscapes.

The garden utilizes three Alter circuits each equipped with a mic pre-amp, and 4 sprout (stringed) panels for generating acoustics. By plucking, rubbing, tapping or even bowing, those micro-acoustic sounds become amplified and affected by the Alter in any number of ways. In essence, the garden is a large microphone designed to pick up vibrations.

Monolithic vs Discrete

A Monolithic version of the Resonant garden consists of a single faceplate for the entire instrument.

A Discrete version of the Resonant garden consists of 7 faceplates, three for each Alter module and four for the sprouts. The discrete version allows for individual sprout and Alter modules to be moved around or substituted with other modules. Keep in mind the power and audio distribution system is designed for the configuration shown here, but can easily be hand wired with standard cables (sold separately). The maximum depth for modules in the garden box is 33mm.

Effects

There are two Alter 1 units and one Alter 2 unit. Each Alter 1 has seven DSP effects which are selected by touching the copper hexagon:

1 - long delay (capable of near infinite feedback looping)
2 - notated granular delay
3 - plate reverb
4 - shimmering reverb
5 - distortion and multi-filter
6 - pitch delay
7 - stutter glitch

Alter 2 has the following effects:

1 - analogue delay
2 - reverb with infinite capture and lp + hp filters
3 - choral reverb
4 - palindrome reverse delay - backward/forward repeat
5 - time stretch
6 - pitch shift (notated semi-tones
7 - time stretch glitch

Control

On each of the Alter sections, the following is present:
- Control for the gain of the mic pre-amp or any incoming audio.
- Controls for Mix, X, Y and Sift as well as clock.
- All effects have a variation of a filter which may change effect to effect.
- X and Y control various rates.
- Clock control adjusts the rate which controls the DSP which can drastically change the effect. In doing so it does slightly lower the quality of the output signal but the results are fantastic. This clock is not for synchronization.
- Mix, X, Y and Sift all have CV control inputs.
- Each control level or CV input is visualized on the control panel.

Acoustics

Each garden panel is equipped with a contact mic. A contact mic is designed to pick up vibration. The mic pre-amp is specifically designed to deal with the frequencies of the contact mic by boosting certain frequencies and dulling others in order to optimize the sound quality. The mic pre-amp has a gain control so the level can be adjusted according to how you intend to play.

Routing

1/8" stereo inputs with separate level/gain control for right and left channels. These level controls can also act as mute as they can take the signal to 0. They can also add gain to a quiet signal.
In its natural state, each Alter utilizes the garden panel acoustics and each Alter outputs its own signal. By plugging in to the left input of any Alter, the mic amp is bypassed. This means that the signal can be chained from one alter to another, utilizing the single final output. This chain of effects can result in an incredibly broad range of sound.
- use all effects in parallel (3 sets of stereo output)
- use two in series and one in parallel (2 sets of stereo output)
- use all in series (single stereo output)
- peak level indicator for clipping levels at the input

Design

The box is constructed with Sapele African hardwood and a white birch bottom panel. It features anodized black aluminium rails for mounting the faceplates. Each sprout of strings is bolted in from the back and held in place with a backing panel under the main board.
Each box has unique wood grain patterns. The wood grain shown in the images will appear different for each instrument we ship.

Included
- Power Supply: 12v positive tip AC Adapter (included) - US - 100-240V ~ 50/60Hz 0.6A
- Printed manual
- Four (4) black 6" (15cm) 3.5mm TS mono patch cables
- Four (4) black 24" (60cm) 3.5mm TS mono patch cables

Dimensions
- 76 HP Total Width, Sprouts: 7 HP, Alters: 16HP
- Mounting Rails are 406.16mm long
Read more
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
est. release 29 Feb 24 $1,230.24
(No payment required now - pay when released)
FORTHCOMING
ADDAC System ADDAC508 Swell Physics Module
ADDAC System ADDAC508 Swell Physics Module (CV modulation/quad module)
Cat: 993830 Rel: 30 Apr 24
 
A CV generator based on the simulation of a physical system, ocean swells
Notes: Following ADDAC's ADDC503 Marble Physics here is a new simulation of a physical system. This time, imagine a small area in the middle of the ocean, in this area we place 4 equally spaced buoys anchored to the bottom in such a system that we can control the spacing between the buoys. Imagine we can control the elements and agitate the waters at will which in turn will make the buoys move up and down as the water surface moves.

Finally imagine the buoys would wirelessly transmit their absolute height directly to your module outputs where they would be mapped to a voltage signal.

ADDAC use a Gerstner Wave as the motor behind the two-dimensional wave generation. In fluid dynamics a Gerstner Wave is described as "a progressive wave of permanent form on the surface of an incompressible fluid of infinite depth". Gerstner waves are often used in computer graphics to simulate any type of water surface, if you've seen any animation film or computer game with water surfaces in it most probably it features a Gerstner wave generating it.

Tech Specs:

10HP
4.5cm deep

70mA +12V
40mA -12V
Read more
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
est. release 30 Apr 24 $347.43
(No payment required now - pay when released)
FORTHCOMING
Supercritical Redshift 6 6-Voice Analogue Variable Character Synthesiser
Cat: 992873 Rel: 31 Aug 24
 
Six-voice analogue variable character desktop synthesiser
Notes: Supercritical Synthesizers introduces their first desktop instrument, Redshift 6 - six voice analogue Variable Character Synthesizer

Supermassively dense analogue oscillator combined with a chameleon analogue filter with versatile gain staging. Now sixfold.

Redshift 6 combines technology from the company's previous products, the Demon Core Oscillator and the Neutron Flux Filter. Each of the six voices features a DCO with analogue waveforms generated under digital control. The filter core is an analogue 4-pole state variable filter also digitally controlled to act like almost any classic vintage synthesizer filter and more. In addition to the oscillators and filters, Redshift 6 has all the features expected of a modern synth - plenty of modulators, flexible voice routing, multitimbrality, MPE, and DSP effects.

Redshift 6's idea is something that is wrapped in the moniker "Variable Character Synthesizer". Each voice's analogue path regarding tuning, gain staging, filter, and more is under strict digital control. Redshift 6 has as lush and warm sweet spot inspired by the analogue polysynth tradition, but it can also cover the full range from almost digitally sterile and clean to distorted misbehaviour and beyond. No modelling here - it's all analogue until the bypassable stereo DSP effects processor.

The oscillator, already road-tested in the Demon Core Oscillator eurorack module, is featured in each of the six voices. The oscillator has multiple tricks up its sleeve, each one wrapped as an Engine for the user to choose between. Traditional twin oscillator engines, supersaw engines, flanging phase sync engines, and transistor organ engines are all powerful modes in user-friendly ways that are easily controllable and modulatable.

Redshift 6's six voices can be configured in plenty of ways. Choose between true six-voice polyphony, classic vintage poly dual layer mode with 3+3 voices, six individual voices each with their own patch and physical output, or any combination of the above. Each of the six voices can also operate as a paraphonic voice with up to 16 note paraphony. Additionally, multiple filters can be chained by routing audio from one voice to another.

The form factor of Redshift 6 is a modern, compact desktop device with a 2.7-inch colour screen. Menu diving is reduced to a minimum, with quick navigation via the shortcut button grid. A selection of familiar synth controls are featured on the front panel. A macro mode is included with six user-assignable controls. The back panel features main audio outputs with a DSP effects processor and four auxiliary voice outputs.

One of the major design principles of Redshift 6 is to have a versatile and capable analogue platform and a flexible UI for new Engines, easily updateable via software updates.

Supercritical Redshift 6 Desktop synthesizer module

Technical specifications

Six voices each featuring:
Full analogue signal chain
Digitally controlled analogue Supercritical Demon Core Oscillator
Analog four pole Variable Character Filter
Flexible gain staging with an analogue boost circuit
Physical audio output per voice (2 main outputs and 4 aux outputs)
Optional voice chaining
Bypassable digital effects in main outputs 1-2
2.7" TFT IPS colour screen with a bank of 8 endless clickable potentiometers and quick navigation via button grid
Quick powerful controls for oscillators and filters.
Six user-assignable macro controls
Six parts multitimbral
Modern MIDI implementation with USB-B connection and DIN IN/OUT
MPE
12V power supply
Physical dimensions: 378 mm x 254 mm x 63 mm
Read more
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
est. release 31 Aug 24 $1,139.43
(No payment required now - pay when released)
FORTHCOMING
Rides In The Storm SED-SCM Discrete Voltage Controlled Oscillator Module
Rides In The Storm SED-SCM Discrete Voltage Controlled Oscillator Module (envelope generator/external/filter/LFO/noise/oscillator/synth voice/VCA module)
Cat: 942310 Rel: 31 May 24
 
Discrete VCOs module in 36HP.
Notes: Discrete VCOs with three Subs, SYNC, Wavefolder, discrete VCA and VCF, Dual analog LFO (one also usable as VCO) into audio rate with Keytracking, huge Mixer section, Ring mod, Glide and Patchfield.

Power consumption: TBA

Rackspace: 36HP
Read more
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
est. release 31 May 24 $526.94
(No payment required now - pay when released)
FORTHCOMING
Torso Electronics T-1 16-Track Algorithmic Sequencer (white)
Cat: 992910 Rel: 30 Jun 24
 
16-track algorithmic sequencer
Notes: Not your average sequencer

A 16 track algorithmic sequencer at the center of your studio. The T-1 offers a generative workflow with focus on immediacy and playful exploration. Whether on stage or in the studio, the T-1 will inspire you with fresh ideas and help you push the boundaries of your music. In short, this is a fundamental rethinking of the sequencer as a modern, fun and inspiring instrument

This machine speaks music

Enter a creative dialogue with T-1, and let its musical algorithms spark your creative process, or bring it on stage to perform your musical ideas live and spice them up with variations created on-the-fly

It's your instrument

The T-1 can be customized to suit your music. In fact, it is many instruments in one: Each of the T-1's 16 tracks can be set up in one of three modes.

Note: Compose rhythms and melodies from scratch with creative musical algorithms, and tweak them to your desire with detailed step editing.

CC: Take absolute control over sound design with 16 CC knobs and add automation via random modulation and step editing

FX: Create real-time midi fx to expand and transform your musical ideas. Connect a midi keyboard for hands on live performance

Connect to everything

The signal flow of any modern studio is a complex web of analog, digital and wireless signals and keeping your instruments connected and in sync can be a drain for your creativity. The T-1 solves this by communicating via MIDI, USB, analog CV and gates, Ableton Link and Wi-Fi connections with all of your gear.

Musical structure in a knob

Sculpt the timing, tonality and overall structure of your music in the same intuitive way you would a parameter on a synthesizer: By the twist of a knob. The T-1 lets you dial in any rhythm in a manner of seconds with euclidean rhythms.

Want to surprise your audience and even yourself? Add a bit of random modulation or change the probability of a step being played or not. Try the T-1 style looping random modulator

Tangible visuals

What you see is what you get: at every touch of a knob or push of a button, 16 RGB buttons show you the state of the instrument while offering up a quick way to jump to a new setting in real-time

Performing is composing

The T-1 is an instrument designed to be played in the here and now. Whether you are working in a studio or on stage, the path between musical inspiration and performance has never been shorter.

Make relative parameter changes on one or multiple tracks simultaneously, save the changes or return to the starting point. With the T-1, your music making process is a constantly evolving flow

Technical specifications

Sequencer
Euclidean rhythm generator (w. step editing)
Advanced note repeater / arpeggiator
Melody generator
7 musical scales + 1 user scale per track
Harmonic pitch control
Random modulation on every parameter

Tracks
16 tracks per pattern
16 MIDI channels
Polyphony on every track

Storage
Auto-save
16 patterns per bank
16 banks

User interface
18 endless rotary encoders with push
23 RGB backlit silicone keypads

Physical
Matte black aluminium casing
Dimensions: L:304, W:114, H:39mm ?(11.9", 4.5", 1.5")
Weight: 815g (1.8 lbs)

In the box
1 x T-1
1 x USB cable
1 x MIDI adapter (type A)

Connectivity
USB C (midi/power)
MIDI in / out / thru (TRS type A)
CV & gate i/o
Ableton Link (WiFi)
Read more
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
est. release 30 Jun 24 $516.38
(No payment required now - pay when released)
FORTHCOMING
Folktek Nano Garden Acoustic Electronic Synthesiser & Audio Effect Processor
Cat: 983110 Rel: 29 Feb 24
 
Acoustic electronic synthesiser & audio effect processor
Notes: Acoustic Electronic "synthesiser" and external audio effect processor with CV control. Little sister of the Resonant Garden.

The Nano Garden is an acoustic-electronic hybrid designed to create anything from beats and oddities to dense soundscapes. From its inception in 2006, the original garden has gone through many changes and refinements: micro garden, luminist garden and illuminist garden and finally this latest and likely final version of what is essentially an expanded micro garden.

The Nano Garden essentially utilizes a single Alter circuit with 7 effects selected specifically for this instrument. Each is also equipped with a mic pre-amp, and 2 garden (stringed) panels for generating acoustics. By plucking, rubbing, tapping or even bowing, those micro-acoustic sounds become amplified and effected by the Alter in any number of ways. In essence, the garden is a large microphone designed to pick up vibrations. Aside from the internal mic, the nano can be used to process external signals with any of the internal effects as well.

Effects

There is a single Alter in the Nano which has seven different DSP effects, selected by touching the copper hexagon. The effect list is different than either Alter 1 or 2 - these are selected specifically for the Nano (this selection is subject to change):

1 - long delay (capable of near infinite feedback looping)
2 - notated granular delay
3 - plate reverb
4 - choral reverb
5 - palindrome reverse delay - backward/forward repeat
6 - pitch delay
7 - time stretch/glitch

Control

- Control for the gain of the mic pre-amp or any incoming audio.
- Controls for Mix, X, Y and Sift as well as clock.
- All effects have a variation of a filter which may change effect to effect.
- X and Y control various rates.
- Clock control adjusts the rate which controls the DSP which can drastically change the effect. In doing so it does slightly lower the quality of the output signal but the results are fantastic. This clock is not for synchronization.
- Mix, X, Y and Sift all have CV control inputs.
- Each control level or cv input is visualized on the control panel.


Acoustics

Each sprout panel is equipped with a contact mic. A contact mic is designed to pick up vibration. The mic pre-amp is specifically designed to deal with the frequencies of the contact mic by boosting certain frequencies and dulling others in order to optimize the sound quality. The mic pre-amp has a gain control so the level can be adjusted according to how you intend to play.

Design

The box is constructed with Sapele African hardwood and a white birch bottom panel. It features anodized black aluminium rails for mounting the faceplates. Each sprout of strings is bolted in from the back and held in place with a backing panel under the main board.

Each box has unique wood grain patterns. The wood grain shown in the images will appear different for each instrument Folktek ship.

Included

- Power Supply: 12V positive tip AC Adapter (included) - US - 100-240V ~ 50/60Hz 0.6A
- Four (4) black 24" (60cm) 3.5mm TS mono patch cables
Read more
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
est. release 29 Feb 24 $563.90
(No payment required now - pay when released)
FORTHCOMING
Tesseract Modular UFO 8 Low Frequency Oscillation Module
Cat: 974272
 
8 triangle low frequency oscillations module - 4HP.
Notes: 8 triangle LFOs with relative frequencies and CV control.

Output voltage is +/- 5.25v (10.5Vpp).

Upper LFO is the fastest and lower is the slowest one. The frequency ratio between LFOs is approx 3/2 (or 1.5), being at max speed the upper 13.5Hz and the lower one 1Hz .

The frequency range with the potentiometer is 80-90%.

Negative voltages present at the CV input will stop the oscillation of all LFOs, but the potentiometer it's an offset, which means that will act as a manual frequency control and will also set the voltage range for the CV input, allowing negative voltages when set to max.

Dimensions: 4 HP
25 mm deep
Read more
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
coming soon $92.92
(No payment required now - pay when released)
FORTHCOMING
X Audio Systems VCRadio Voltage Controlled FM/AM/SW Stereo Radio Receiver Module
Cat: 971187
 
Voltage controlled FM/AM/SW stereo radio receiver module with modulation capabilities - 8HP.
Notes: The VCRadio by X Audio Systems is a voltage controlled FM/AM/SW stereo radio receiver with modulation capabilities. The unit generates a continuous stream of audio content, noises, squelches and broadcasts, depending on where you are located in the world. It will easily pick-up any station or noises lurking at any frequency within the selected range.

Connect a LFO to the CV input to modulate the TUNER knob and create beats/patterns of mixed radio signals and noises! Lots of fun guaranteed!

Radio bands

FM (88 - 108 MHz)
AM (520 - 1710 kHz)
SW band 1 (2,3 - 2,5 MHz)
SW band 2 (3,9 - 4,0 MHz)
SW band 3 (5,6 - 6,4 MHz)
SW band 4 (6,8 - 7,6 MHz)
SW band 5 (9,2 - 10,0 MHz)
SW band 6 (11,6 - 12,2 MHz)

Features of the VCRadio
- 1 radio receiver (FM - AM - 6 bands of Short Wave)
- 2 LEDs for indicating if the radio signal is strong (STATION) or stereo (STEREO)
- 1 CV Input (with gain) to modulate the TUNER with an external signal (-5V - +5V)
- 3 audio line outputs (LEFT, RIGHT, SUM)
- 2 antennas (long telescopic antenna on the front for FM/SW and ferrite loop in the back for AM)
- Eurorack module 8HP
Read more
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
coming soon $162.62
(No payment required now - pay when released)
FORTHCOMING
ADDAC System ADDAC309 CV To Expression Module
ADDAC System ADDAC309 CV To Expression Module (attenuator/controller/CV modulation/effect/expression/external/utility module)
Cat: 992144 Rel: 30 Apr 24
 
CV to expression module - 4HP
Notes: ADDAC309 CV to Expression allows a simple and straight forward connection between modular and effect pedals that features expression pedal TRS inputs.

Instead of using an expression pedal into the effects pedal the user can use this module in between a CV source and the Effects pedal to be controlled.

This is a great way to control the available parameters on the effects pedals straight from a CV source.

ADDAC309 features 2 channels each with a CV Input with attenuator and a 1/4" jack output.

This is a passive module, the power needed for operation is taken from the pedal power instead of the modular frame, this allows for perfect matching of the pedal's operating voltage which can range from 3.3v to 9v.

Tech Specs:
4HP
3,5cm deep
Passive module
Read more
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
est. release 30 Apr 24 $65.48
(No payment required now - pay when released)
FORTHCOMING
Synthetic Sound Labs Soleil Lo-Fi MIDI String Synthesiser
Cat: 977158
 
Lo-fi MIDI string desktop synthesiser
Notes: Inspired by the early vintage string synths of the '70s such as the Elka Rhapsody and ARP Solina, the Soleil POD is a tiny low-cost Lo-Fi MIDI String Synth table-top box.

Capable of playing 4 paraphonic notes with 2 oscillator ranks per note. Waveforms are continuously variable from thick sawtooth thru variable pulse widths for more reedy sounds. The second rank is detunable for lush pads and honky-tonk riffs.

The Soleil contains built-in modulation / vibrato LFO, the depth of which can be controlled by MIDI. Attack and release envelope times are individually adjustable and share a single VCA making this a "paraphonic" instrument. A gate output jack allows convenient triggering of external effects and synth equipment, and its state is displayed by an LED.

MIDI is input via a 3.5mm TRS Type "A" jack, and responds to keyboard running status as well as pitch bend and modulation. An LED MIDI displays MIDI activity.

MIDI channel defaults to channel 1 but can be easily reset to other channels using a unique sequence from your controller keyboard at power-up, which is retained in non-volatile memory.

A fine tune control allows accurate tuning to other instruments, and an output volume control is provided. MIDI, Gate Out and Audio Out are standard 3.5mm (1/8") jacks.

Specifications:

Controls

Fine Tune - (Approx. +/- 1 semitone)
Detune - (Approx. +1 semitone)
Wave - (Sawtooth thru variable Pulse Width)
Modulation Rate
Attack Rate
Decay Rate
Volume

Inputs
3.5mm MIDI TRS Type "A" Standard wiring
2.1mm Co-axial 2.1mm Power - Center Positive - NOT included

Outputs
Audio Out - ~2V peak-to-peak
Gate Out - 0 to +5V

Indicator LEDs
MIDI Activity (Orange)
Gate Active (Orange)

MIDI Implementation
Note On, Note Off, Running Status
Mod Wheel: 176 (B0 hex)
Pitch Bend: 224 (E0 hex)

Power
2.1mm Coaxial, +8 to +18V DC Center positive, reverse polarity protected
(User supplied adapter)

Size
4.5" W x 2.4" H x 1.25" D (not including pot shafts)
Read more
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
coming soon $186.91
(No payment required now - pay when released)
FORTHCOMING
Flame Ton Duophonic Melody Looper & Quantizer Module
Flame Ton Duophonic Melody Looper & Quantizer Module (sequencer/looper/random/dual/stereo/quantize synth module)
Cat: 973767
 
Duophonic melody looper and quantizer module - 12HP.
Notes: "TON" is a 12HP wide Eurorack live sequencer module for creating two note sequences. There are two 1V/octave outputs with GATE/NOTE/VELOCITY. Notes can also be sent via MIDI. Both note tracks are independent of each other and can be used in different octave spreads. In addition to the analog connection, the module has full MIDI functionality. It can be synchronized via analogue clock or via MIDI.

The sequencer is designed as a looper. It plays a pattern of up to four bars in a loop. The notes can be played (or deleted) quantized with two buttons. One button is used for note repeats, another for setting individual events. The pitch is determined by either the potentiometer or the built-in distance sensor. The sensor works in a range of about 1 to 40 cm and is independent of extraneous light. Even bright sunlight does not affect it.

A 1-octave mini-keyboard allows transposing on the fly and setting a scale. Since the module has two CV inputs, it can also be used as a two-channel quantizer or arpeggiator. All settings of the current pattern are simply saved together in a patch. There are 5 banks with 7 seats each (per mini-keyboard) available. This allows up to 35 patterns to be managed. The patches can also be selected via CV or MIDI program change and can be saved and reloaded on the fly.

The pattern can be manipulated during and after the import with eg: gate length, velocity, random, last step, hold, mute, glide, scale and transposition. Both tracks can have different settings. With TRACK-Link, however, parameters can also be applied to both tracks at the same time. This is helpful, for example, with transpositions or duophonic playing.

Dimensions
12 HP
45 mm deep

Current Draw
80 mA +12V
Read more
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
coming soon $319.97
(No payment required now - pay when released)
FORTHCOMING
Zoom H1essential 32-Bit Float Stereo Handy Recorder
Cat: 997060 Rel: 30 Apr 24
 
32-bit float stereo handy recorder
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
est. release 30 Apr 24 $100.32
(No payment required now - pay when released)
FORTHCOMING
Red Panda Radius Ring Modulator & Frequency Shifter Effects Pedal
Cat: 995385 Rel: 30 Apr 24
 
Ring modulator & frequency shifter effects pedal
Notes: Ring modulator / frequency shifter.

The Radius is a ring modulator and frequency shifter with pitch tracking and an advanced LFO. It is designed around a novel "eight-quadrant multiplier" algorithm that smoothly transitions from ring modulation to frequency shifting and allows different frequency ratios for the upper and lower tones. Radius puts complex harmonic structures, bell-like tones, metallic textures, frequency shifting, soft tremolo, and bubbly phaser sounds at your fingertips.

A ring modulator multiplies two signal signals together to create new frequencies that are the sum and difference of the input frequencies. One signal is your instrument, and the other is an internal oscillator. The Radius can double the sum or difference frequency ratios and adjust their relative levels, unlocking a spectrum of timbres beyond traditional ring modulation.

Pitch tracking, a push-to-tune footswitch, and picking dynamics make the Radius responsive and predictable on stage. Hold the left footswitch and play a note to tune the carrier oscillator to that note. Pitch tracking maintains the pitch ratio as you play up and down the scale, or tracks by a ratio (or inverse) for more dynamic sounds. An expression pedal can be assigned to any combination of knobs.

The Radius has an advanced LFO with triangle, square, random waveforms and an eight step sequencer, all of which can be envelope triggered. The envelope follower makes it responsive to playing dynamics, and two "X" modulation waveforms create sweeping spectral changes.

Well-spaced controls and stereo input/output make the Radius perfect for sound design, synths, and creative mixing. A full MIDI implementation allows you to sync to MIDI clock, sequence parameter changes, and play the carrier oscillator from a keyboard.

The Radius is a musical ring modulator and frequency shifter that transforms the timbre of your instrument in new ways. With deep features and intuitive control, Radius modernizes classic electronic techniques for the future.

Dimensions: 3.1" x 4.75" x 2.5" (with knobs)
Shipping dimensions: 5.2" x 3.75" x 3.0"
Shipping weight: 1.1 lbs

Requires a 9V DC 250 mA power supply (not included).
Read more
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
est. release 30 Apr 24 $332.64
(No payment required now - pay when released)
FORTHCOMING
Rossum Electro-Music Assimil8or Multi-Timbral Phase Modulation Sampler Module (black)
Rossum Electro-Music Assimil8or Multi-Timbral Phase Modulation Sampler Module (black) (sampling/CV modulation/digital/drum/dual/stereo/multiple/LFO module)
Cat: 996331 Rel: 30 Apr 24
 
multi-timbral phase modulation sampler module - 28HP
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
est. release 30 Apr 24 $987.36
(No payment required now - pay when released)
FORTHCOMING
Plum Audio ADVA Smart Multimode Filter Module (silver)
Plum Audio ADVA Smart Multimode Filter Module (silver) (distortion/filter/noise/VCA synth module)
Cat: 970499
 
24dB analogue multimode filter module with VCA, white noise generator, pre and post-distortions and a smart interface - 6HP.
Notes: ADVA is a fat-sounding 24dB ANALOGUE MULTIMODE FILTER packed with features including a VCA, white noise generator, pre and post-distortions and a smart interface that makes it a versatile beast in a surprisingly small package.

With 7 filter modes, ADVA provides high richness and a wide variety of tones; it can filter gently like an LPG or it can be pushed up to the edges of hot acid tones.

Unlike many other multimode filters, a phase keeper ensures that ADVA never inverts the input's phase in any of its filter modes.

Self-Oscillation is available for all modes, producing a range of waves from clean sine waves up to soft square waves when activating the post-distortion circuit. Together with V/OCT tracking, ADVA works brilliantly as an oscillator or as a percussive sound generator.

A resonance loudness compensation circuit ensures that ADVA does not compromise on volume when the resonance is increased.

An Internal analogue white noise generator is the little bit of spice that can make the world of difference. Blend it together with the input signal by rotating the dedicated knob to add more richness to your sound and further emphasize cutoff movements, or use it as an FM source to achieve the different flavors of dirty tones.

ADVA is packed with two separate distortion circuits. First, the soft-clipping overdrive is located in the sound path after the white noise blend knob and the input gain knob, a circuit which can push the incoming signal to thicken any waveform. If you blend the input with the noise generator it can compress the noise and exaggerate it to achieve more aggressive levels.

The second (post) distortion is located after the VCA, just before the output. This is a more aggressive distortion and can be used for acid and other dirty hot tones.

Although the sound path is completely analogue, ADVA has a digital support circuit that enables a smart routing system with the option to modulate filter modes via CV, and a very intuitive interface that includes 3 CLICKKNOBS and an RGB LED ring that provides visual feedback for whatever state the filter is in.

Dimensions
6 HP
35 mm deep

Current Draw
110 mA +12V
5 mA -12V
Read more
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
coming soon $298.84
(No payment required now - pay when released)
FORTHCOMING
Plum Audio ADVA 1U Smart Multimode Filter Module (silver)
Plum Audio ADVA 1U Smart Multimode Filter Module (silver) (distortion/filter/noise/VCA synth module)
Cat: 970520
 
24dB analogue multimode filter module with VCA, white noise generator, pre and post-distortions and a smart interface - 22HP.
Notes: ADVA is a fat-sounding 24dB ANALOGUE MULTIMODE FILTER packed with features including a VCA, white noise generator, pre and post-distortions and a smart interface that makes it a versatile beast in a surprisingly small package.

With 7 filter modes, ADVA provides high richness and a wide variety of tones; it can filter gently like an LPG or it can be pushed up to the edges of hot acid tones.

Unlike many other multimode filters, a phase keeper ensures that ADVA never inverts the input's phase in any of its filter modes.

Self-Oscillation is available for all modes, producing a range of waves from clean sine waves up to soft square waves when activating the post-distortion circuit. Together with V/OCT tracking, ADVA works brilliantly as an oscillator or as a percussive sound generator.

A resonance loudness compensation circuit ensures that ADVA does not compromise on volume when the resonance is increased.

An Internal analogue white noise generator is the little bit of spice that can make the world of difference. Blend it together with the input signal by rotating the dedicated knob to add more richness to your sound and further emphasize cutoff movements, or use it as an FM source to achieve the different flavors of dirty tones.

ADVA is packed with two separate distortion circuits. First, the soft-clipping overdrive is located in the sound path after the white noise blend knob and the input gain knob, a circuit which can push the incoming signal to thicken any waveform. If you blend the input with the noise generator it can compress the noise and exaggerate it to achieve more aggressive levels.

The second (post) distortion is located after the VCA, just before the output. This is a more aggressive distortion and can be used for acid and other dirty hot tones.

Although the sound path is completely analogue, ADVA has a digital support circuit that enables a smart routing system with the option to modulate filter modes via CV, and a very intuitive interface that includes 3 CLICKKNOBS and an RGB LED ring that provides visual feedback for whatever state the filter is in.

Dimensions
22 HP
35 mm deep
Module is a 1U tile in Intellijel format

Current Draw
110 mA +12V
50 mA -12V
Read more
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
coming soon $298.84
(No payment required now - pay when released)
FORTHCOMING
Folktek Alter 2 Effects Processor Module
Folktek Alter 2 Effects Processor Module (delay/effect/filter/pitch shifter/reverb module)
Cat: 983094 Rel: 29 Feb 24
 
Effects processor module - 16HP
Notes: Alter 2 is an effects processor for Eurorack format. There are two versions of the Alter which are visually identical except the names "Alter 1" and "Alter 2". This is Alter 2. Internally, 1 & 2 have an entirely different set of effects from the other. Each version features 7 unique and meticulously designed DSP effects.

Control

- Controls for mix, X, Y and filter as well as clock.
- All effects have a variation of a filter which may change effect to effect.
- X and Y control various rates, feedback and time over the different effects.
(note that some of the images shows a prototype which says "rate" under two of the pots. The faceplate has been changed to X and Y.)
- Clock control adjusts the rate which controls the DSP which can drastically change the effect. In doing so it does slightly lower the quality of the output signal but the results are fantastic. This clock is not for synchronization.
- Mix, X, Y and filter all have CV control inputs.
- Each control level or cv input is visualized on the control panel.

Ins and outs

- Stereo inputs with separate level/gain control for right and left channels. These levels can also act as mute as it can take the signal to 0. They can also add gain to a quiet signal.
- Peak level indicator for clipping levels at the input.
- Mono input is made stereo within the DSP and outputs to both left and right channels.
- Stereo outputs for right and left channels.

Effects

The effect is selected by the hexagonal touch pad. The effects for Alter 2 are as follows:
1 - Analogue delay
2 - Reverb with infinite capture and LP + HP filters
3 - Choral reverb
4 - Palindrome reverse delay - backward/forward repeat
5 - Time stretch
6 - Pitch shift (notated semi-tones)
7 - Time stretch glitch

Specs

Includes printed manual
+12V: 160mA
-12V: 0mA
+5V: 0mA
16HP width
25 mm Depth
Read more
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
est. release 29 Feb 24 $307.30
(No payment required now - pay when released)
FORTHCOMING
Cosmotronic Messor Stereo Compressor & Transient Shaper Module (silver)
Cosmotronic Messor Stereo Compressor & Transient Shaper Module (silver) (dynamics/dual/stereo/envelope follower/expander/VCA module)
Cat: 995681 Rel: 30 Apr 24
 
Stereo compressor & transient shaper module - 8HP
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
est. release 30 Apr 24 $216.48
(No payment required now - pay when released)
FORTHCOMING
Tangible Waves AE Modular Cirrus Classic Granular Processor Module
Cat: 967160
 
Granular processor module.
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
coming soon $136.22
(No payment required now - pay when released)
FORTHCOMING
TipTop Audio Octopus USB/MIDI To ART Interface & Voice Manager Module
Cat: 947146 Rel: 31 Mar 24
 
USB/MIDI to ART interface & voice manager module - 18HP
Notes: OCTOPUS is a powerhouse ART controller that takes MIDI in via the USB or DIN connector and outputs 8 ART channels with 8 velocity CV plus 8 drum triggers. Together with the ART oscillators the OCTOPUS provide unprecedented simplicity connecting the modular to your computer sequencers, hardware midi sequencers and keyboards. Each ART channel can play polyphonic notes, monophonic notes or create multi-channel polyphony using an internal voice manager. All together OCTOPUS can play more voices and notes from a single controller than ever was possible in modular. Using ART high speed control signals OCTOPUS can maintain low jitter for tight timing. OCTOPUS is our first ART controller with more to follow, please select between Octopus or ART V/Oct Quantizer to get started with ART. Please note, OCTOPUS is not a 1V/Oct midi to CV and should not be confused as one.

Size: 18HP - Depth: 40mm / 1.5"
Power: +12V 140mA / -12V 100mA
Read more
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
est. release 31 Mar 24 $345.30
(No payment required now - pay when released)
FORTHCOMING
Korg Modwave Module 60-Voice Polyphonic Wavetable Synthesiser
Cat: 995048 Rel: 30 Apr 24
 
60-voice polyphonic wavetable desktop synthesiser
Notes: All the features of the Modwave MkII in a compact 4U 19" desktop/rackmount package. Modwave builds on the legacy of Korg's DW-8000 and transforms it into a modern monster synth, featuring incredibly deep wavetable oscillators, gorgeous filters, wildly flexible modulation, unmatched polyphony, comprehensive pattern sequencing, and immediately satisfying hands-on control to deliver unique, powerful, and easily customizable sounds and phrases.

Like Modwave MkII, the Modwave Module provides an astonishing 60 stereo voices of polyphony - almost double the original Modwave's 32, and an unprecedented number for a wavetable synth at any price. The new 4U rack-mount enclosure has the same controls as the keyboard models, yet is easily transportable and fits neatly into any studio or desktop production system.

Responding to user requests, Korg have updated all LFOs with options for free running, delayed start, and retriggering. Korg have also added a pre/post switch for reverb sends, new modulation sources, and more.

The Modwave Module is fully compatible with the sounds and samples of the original Modwave, Modwave Mk II, and Modwave Native software, as well as many third-party libraries. MIDI 2.0 Property Exchange and Polyphonic Aftertouch Support

With the latest software updates, all models of Modwave, hardware and software, now support MIDI 2.0 Property Exchange and easy access to Polyphonic Aftertouch - making them excellent companions to the Korg Keystage controller.

Rack-Mount and Desktop

The Modwave Module is cleverly designed for both desktop and rack-mount use. The panel is redesigned to fit into a standard 19" width, and the rear jack panel is recessed to allow easy access to cables even with gear mounted directly above. With desktop setups, brackets offer a choice of panel angles: flatter for performing standing up, or more upright for working while seated in your studio.

Specifications

Maximum Polyphony: 60 stereo voices
Dimensions (W x D x H): 483 x 172 x 107 mm / 19.02 x 6.77 x 4.21 inch
Weight: 1.7 kg / 3.75 lbs.
Accessories: AC adapter
Sound generating system: modwave synthesis engine

Modulation

Controllers: Mod Wheel, Pitch Wheel, Kaoss Physics, 4x Mod Knobs

Other Sources

4x Envelopes, 5x LFOs, 2x Mod Processors, 2x Key Track, Seq Lanes A-D, Step Pulse, Tempo, Program/Performance Note Count, Program/Performance Voice Count, Poly Legato, Velocity, Exponential Velocity, Release Velocity, Gate, Gate+Damper, Note-On Trigger, Note-On Trigger+Damper, Note Number, Aftertouch and Poly Aftertouch (external MIDI only), MIDI CCs +/-, MIDI CCs +

Destinations: Most parameters can be modulated, including parameters of individual Motion Sequence Steps: Depending on Motion Sequence length, there can be more than 1,000 potential modulation targets per Program.

Effects

Pre FX: Decimator, Graphic EQ, Guitar Amp, Modern Compressor, Parametric EQ, Red Compressor, Ring Modulator, Tremolo, Wave Shaper

Mod FX: Black Chorus/Flanger, Black Phase, CX-3 Vibrato Chorus, EP Chorus, Harmonic Chorus, Modern Chorus, Modern Phaser, Orange Phase, Polysix Ensemble, Small Phase, Talking Modulator, Vintage Chorus, Vintage Flanger, Vintage/Custom Wah, Vox Wah

Delay: L/C/R Delay, Multiband Mod Delay, Reverse Delay, Stereo/Cross Delay, Tape Echo

Master Reverb: Early Reflections, Overb

Master EQ: 4-band parametric EQ

General

Inputs/outputs: Headphone (6.3 mm stereo phone jack), OUTPUT L/MONO and R (impedance-balanced 6.3mm TRS phone jacks), DAMPER (6.3 mm phone jack, half-damper not supported), MIDI IN and OUT connectors, USB B port
Power supply: AC adapter (DC12V, 2500mA)
Power consumption: 5 W
Read more
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
est. release 30 Apr 24 $738.14
(No payment required now - pay when released)
FORTHCOMING
Korg Wavestate Module 96-Voice Polyphonic Wave Sequencing Synthesiser
Cat: 995074 Rel: 30 Apr 24
 
96-voice polyphonic wave sequencing desktop synthesiser
Notes: A new modular model that makes a big difference in the music production environment.

Introducing the Wavestate module - all of the features of the Wavestate mkII in a compact 19" desktop/rackmount package.

In 2020, the acclaimed Wavestate brought KORG's Wave Sequencing to the next level. Featuring the radically re-imagined Wave Sequencing 2.0, the Wavestate delivers astonishing, ever-changing sounds with extensive hands-on control. Far from a nostalgic reissue, the Wavestate was designed from the ground up for a new generation of musicians, producers, and composers, taking cues from sources as diverse as modular synths, groove boxes, and algorithmic composition.

120 voices of polyphony, updated LFOs, and more

Taking full advantage of both a new enclosure design and new processing hardware, the Wavestate module provides an impressive 120 stereo voices of polyphony. The new 4U rack-mount enclosure has the same controls as the keyboard models, yet is easily transportable and fits neatly into any studio or desktop production system.

Responding to user requests, we've also updated all LFOs with options for free running, delayed start, and retriggering, added new modulation sources, and more. A software update will also be available for the original Wavestate.

The Wavestate module is fully compatible with the sounds and samples of the original Wavestate, Wavestate mk II, Wavestate SE, and Wavestate native software, as well as many excellent third-party libraries.

MIDI 2.0 Property Exchange and Polyphonic Aftertouch support

With the latest software updates, all models of Wavestate, hardware and software, now support MIDI 2.0 Property Exchange. Hundreds of the original factory sounds have been updated to include Polyphonic Aftertouch modulation (Channel Aftertouch is supported as well). All of this makes the Wavestate module an excellent companion to KORG's Keystage controller.

Rack-Mount and Desktop

The Wavestate module is cleverly designed for both desktop and rack-mount use. The panel is redesigned to fit into a standard 19" width, and the rear jack panel is recessed to allow easy access to cables even with gear mounted directly above. With desktop setups, brackets offer a choice of panel angles: flatter for performing standing up, or more upright for working while seated in your studio.

Many musicians have requested a module version of the wavestate. Now that components are once again available after a long period of supply-chain disruption, KORG is pleased to make that request a reality.

Main Specifications

Maximum Polyphony: 120 stereo voices
Dimensions (W x D x H): 483 x 172 x 113 mm / 19.02 x 6.77 x 4.45 inch
Weight: 1.7 kg / 3.75 lbs.
Accessories: AC adapter
Sound generating system: Wave Sequencing 2.0
Maximum Polyphony: 96 stereo voices
Sounds: Ships with 261 Performances, 799 Programs, and 1,042 Wave Sequences
Storage for tens of thousands of user Performances Structure

Performance

4 Layers, Reverb, EQ; all edits are stored in the Performance, DAW-style (saving as separate Programs, Wave Sequences etc. is supported but not required)
Layer: Program, Arpeggiator, Key and Velocity Zones
Program: Wave Sequence, Filter, Amp, Pre FX, Mod FX, Delay
Filters: 2-pole LPF, 2-pole HPF, 2-pole BPF, 2-pole Band Reject, 4-pole LPF, 4-pole HPF, 4-pole BPF, 4-pole Band Reject, Multi Filter, MS-20 LPF, MS-20 HPF, Polysix
Modulation: Controllers
Mod Wheel, Pitch Wheel, Vector Joystick X/Y, 8x Program/Performance Mod Knobs
Other Sources: 3x Envelopes, Vector Envelope, 3x LFOs, 2x Mod Processors, 2x Key Track, Step Sequencer Lane, Step Pulse, Tempo, Program/Performance Note Count, Program/Performance Voice Count, Poly Legato, Velocity, Exponential Velocity, Release Velocity, Gate/Gate+Damper, Note-On Trigger/Note-On Trigger+Damper, Note Number, Aftertouch/Poly Aftertouch (external MIDI only), MIDI CCs +/-, MIDI CCs +
Destinations: Most parameters can be modulated, including parameters of individual Wave Sequence Steps. Depending on Wave Sequence length, there can be more than 1,000 potential modulation targets per Program.

Effects

Pre FX: Decimator, Graphic EQ, Guitar Amp, Modern Compressor, Parametric EQ, Red Compressor, Ring Modulator, Tremolo, Wave Shaper
Mod FX: Black Chorus/Flanger, Black Phase, CX-3 Vibrato Chorus, EP Chorus, Harmonic Chorus, Modern Chorus, Modern Phaser, Orange Phase, Polysix Ensemble, Small Phase, Talking Modulator, Vintage Chorus, Vintage Flanger, Vintage/Custom Wah, Vox Wah
Delay: L/C/R Delay, Multiband Mod Delay, Reverse Delay, Stereo/Cross Delay, Tape Echo
Reverb: Early Reflections, Overb
Performance EQ: 4-band parametric EQ

Inputs/outputs: Headphone (6.3 mm stereo phone jack), OUTPUT L/MONO and R (impedance-balanced 6.3 mm TRS phone jacks), DAMPER (6.3 mm phone jack), MIDI IN and OUT connectors, USB B port
Power supply: AC adapter (DC12V, 2500mA)
Power consumption: 5 W
Dimensions (W x D x H): 565 x 338 x 92 mm/22.24" x 13.31" x 3.62"
Weight: 2.9 kg/6.93 lb.

Included items

AC adapter
Accessories (sold separately)
DS-1H damper pedal, PS-1 pedal switch, PS-3 pedal switch
Read more
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
est. release 30 Apr 24 $685.34
(No payment required now - pay when released)
FORTHCOMING
UDG Ultimate DJ/Producer Backpack Trolley For Ableton Push 3/Ecler DJ Warm4/Pioneer DJ CDJ-3000/Reloop RMX-95/Roland SPD-SX Pro
Cat: 991988 Rel: 30 Apr 24
 
Backpack trolley designed to fit 18.4" laptop, Pioneer DJ CDJ-3000, Ecler Warm4, Reloop RMX-95, Roland SPD-SX Pro, Ableton Push 3, etc...
Notes: The ultimate companion for producers on the move - the UDG Ultimate Producer Backpack Trolley. This sleek and versatile backpack is designed to meet the demands of modern music producers and DJs, combining style, functionality, and durability in one package.

The Producer Backpack Trolley is more than just a bag; it's a travel companion designed to make your life easier while maintaining a sleek, professional look. Whether you're a DJ, music producer, or someone who needs a reliable, feature-packed backpack for travel, this is the perfect choice. Elevate your gear transportation experience with the ultimate in style and functionality. Get yours today!

Specifications

Colour: Black, Orange inside
Weight: 4,25 kg / 9.35 lbs
Outer Dimensions (W x H x D): 39.5 x 62.0 x 32.0 cm | 15.5 x 24.4 x 12.6 inch
Inner Dimensions (W x H x D): 35.0 x 45.5 x 15.5 cm | 13.8 x 17.9 x 6.1 inch
Material: Water Resistant Nylon 420D

Protection

Padded MIDI controller compartment
Inseparable wheel cover
Comfortable moisture absorbent shoulder straps
Ergonomic back padding provide exceptional comfort
Integrated with a TSA combination lock
Easy backpack to trolley mechanism

Extras

Multiple external pockets for accessories & smaller gear
Quick access top pocket
Top & side carry handles
Retractable handle with 2-stage trolley system
Smooth rolling in-line wheels with high quality in-line skate bearings

Fits

Main compartment fits up to 18.4" laptop.
Pioneer CDJ-3000, Ecler Warm4, Reloop RMX-95, Roland SPD-SX Pro, Ableton Push 3
Read more
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
est. release 30 Apr 24 $261.88
(No payment required now - pay when released)
FORTHCOMING
Plum Audio ADVA 1U Smart Multimode Filter Module (black)
Plum Audio ADVA 1U Smart Multimode Filter Module (black) (distortion/filter/noise/VCA synth module)
Cat: 970513
 
24dB analogue multimode filter module with VCA, white noise generator, pre and post-distortions and a smart interface - 22HP.
Notes: ADVA is a fat-sounding 24dB ANALOGUE MULTIMODE FILTER packed with features including a VCA, white noise generator, pre and post-distortions and a smart interface that makes it a versatile beast in a surprisingly small package.

With 7 filter modes, ADVA provides high richness and a wide variety of tones; it can filter gently like an LPG or it can be pushed up to the edges of hot acid tones.

Unlike many other multimode filters, a phase keeper ensures that ADVA never inverts the input's phase in any of its filter modes.

Self-Oscillation is available for all modes, producing a range of waves from clean sine waves up to soft square waves when activating the post-distortion circuit. Together with V/OCT tracking, ADVA works brilliantly as an oscillator or as a percussive sound generator.

A resonance loudness compensation circuit ensures that ADVA does not compromise on volume when the resonance is increased.

An Internal analogue white noise generator is the little bit of spice that can make the world of difference. Blend it together with the input signal by rotating the dedicated knob to add more richness to your sound and further emphasize cutoff movements, or use it as an FM source to achieve the different flavors of dirty tones.

ADVA is packed with two separate distortion circuits. First, the soft-clipping overdrive is located in the sound path after the white noise blend knob and the input gain knob, a circuit which can push the incoming signal to thicken any waveform. If you blend the input with the noise generator it can compress the noise and exaggerate it to achieve more aggressive levels.

The second (post) distortion is located after the VCA, just before the output. This is a more aggressive distortion and can be used for acid and other dirty hot tones.

Although the sound path is completely analogue, ADVA has a digital support circuit that enables a smart routing system with the option to modulate filter modes via CV, and a very intuitive interface that includes 3 CLICKKNOBS and an RGB LED ring that provides visual feedback for whatever state the filter is in.

Dimensions
22 HP
35 mm deep
Module is a 1U tile in Intellijel format

Current Draw
110 mA +12V
50 mA -12V
Read more
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
coming soon $298.84
(No payment required now - pay when released)
FORTHCOMING
Winterbloom Neptune Resonant Diode Ladder Filter Module
Cat: 1000562 Rel: 31 May 24
 
Resonant diode ladder filter module - 12HP
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
est. release 31 May 24 $220.71
(No payment required now - pay when released)
FORTHCOMING
Folktek Alter Y Multi-Effects Pedal
Cat: 983099 Rel: 29 Feb 24
 
Multi-effects pedal
Notes: Alter Y is the pedal version of Alter 2 eurorack module featuring four 1/4" jacks in addition to 1/8" as well as buffered switching that allows for trails.

Though it functions the same as other pedals, this pedal is a little different. Most pedals are made for guitars and then artists may choose to use them in different ways. Folktek made this pedal to work with either standard 1/4" jacks (for both input and output) or 1/8" (3.5mm) jacks for use with anything else. For those who like to use CV (control voltage) for any eurorack format, cv keyboard, or pedals which output cv (e.g. expression or sequencing), all four of the main knobs have cv inputs (mix, x, y, filter) so you can control your knobs without touching if the desire strikes you.

These pedals accept guitar, line or eurorack levels.

The enclosure is very thick, gold plated PCB (it's very, very tough).

Included power is standard for most pedals (2.1mm, -tip)

Folktek wanted a broad array of effects in each X and Y pedal so each is a mashup of effects which complimented one another when used together. Running X into Y or vis versa creates some powerful changes.

Control

- Controls for Mix, X, Y and Sift as well as clock.
- All effects have a variation of a filter which may change effect to effect.
- X and Y control various rates, feedback and time over the different effects (note that some of the images shows a prototype which says "rate" under two of the pots. The faceplate has been changed to "X" and "Y").
- Clock control adjusts the bitrate which controls the DSP which can drastically change the effect. In doing so it does slightly lower the quality of the output signal but the results are fantastic. This clock is not for synchronization.
- Mix, X, Y and Filter all have CV control inputs.
- Each control level or CV input is visualized on the control panel.
- Buffered relay-based bypass over 1/4" ins and out.

Ins and outs

- Stereo 1/4" ins and outs.
- Stereo 3.5mm inputs with separate level/gain control for right and left channels. These levels can also act as mute as it can take the signal to 0. They can also add gain to a quiet signal.
- Peak level indicator for clipping levels at the input.
- Mono input is made stereo within the DSP and outputs to both left and right channels.
- Stereo outputs for right and left channels.

Effects

1 - analogue delay
2 - reverb with infinite capture and LP + HP filters
3 - choral reverb
4 - palindrome reverse delay - backward/forward repeat
5 - time stretch
6 - pitch shift (notated semi-tones)
7 - time stretch glitch

Specs

- Power: 12v negative tip AC Adapter (included) - US - 100-240V ~ 50/60Hz 0.6A
- Dimensions: 6" x 5.1" x 2.2" (152.7mm x 128.5 x 56mm)
Read more
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
est. release 29 Feb 24 $357.98
(No payment required now - pay when released)
FORTHCOMING
Folktek Alter X Multi-Effects Pedal
Cat: 983098 Rel: 29 Feb 24
 
Multi-effects pedal
Notes: Alter X is the pedal version of Alter 1 eurorack module featuring four 1/4" jacks in addition to 1/8" as well as buffered switching that allows for trails.

Though it functions the same as other pedals, this pedal is a little different. Most pedals are made for guitars and then artists may choose to use them in different ways. Folktek made this pedal to work with either standard 1/4" jacks (for both input and output) or 1/8" (3.5mm) jacks for use with anything else. For those who like to use CV (control voltage) for any eurorack format, cv keyboard, or pedals which output cv (e.g. expression or sequencing), all four of the main knobs have cv inputs (mix, x, y, filter) so you can control your knobs without touching if the desire strikes you.

These pedals accept guitar, line or eurorack levels.

The enclosure is very thick, gold plated PCB (it's very, very tough).

Included power is standard for most pedals (2.1mm, -tip)

Folktek wanted a broad array of effects in each X and Y pedal so each is a mashup of effects which complimented one another when used together. Running X into Y or vis versa creates some powerful changes.

Control

- Controls for Mix, X, Y and Sift as well as clock.
- All effects have a variation of a filter which may change effect to effect.
- X and Y control various rates, feedback and time over the different effects (note that some of the images shows a prototype which says "rate" under two of the pots. The faceplate has been changed to "X" and "Y").
- Clock control adjusts the bitrate which controls the DSP which can drastically change the effect. In doing so it does slightly lower the quality of the output signal but the results are fantastic. This clock is not for synchronization.
- Mix, X, Y and filter all have CV control inputs.
- Each control level or cv input is visualized on the control panel.
- Buffered relay-based bypass over 1/4" ins and out.


Ins and outs

- Stereo 1/4" ins and outs.
- Stereo 3.5mm inputs with separate level/gain control for right and left channels. These levels can also act as mute as it can take the signal to 0. They can also add gain to a quiet signal.
- Peak level indicator for clipping levels at the input.
-Mono input is made stereo within the DSP and outputs to both left and right channels.
- Stereo outputs for right and left channels.

Effects

1 - long delay
2 - notated granular delay
3 - plate reverb
4 - shimmering reverb
5 - distortion and multi-filter
6 - pitch delay
7 - stutter glitch

Specs

- Power: 12v negative tip AC Adapter (included) - US - 100-240V ~ 50/60Hz 0.6A
- Dimensions: 6" x 5.1" x 2.2" (152.7mm x 128.5 x 56mm)
Read more
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
est. release 29 Feb 24 $357.98
(No payment required now - pay when released)
FORTHCOMING
4ms Catalyst Controller 8-Channel Macro Controller Module
4ms Catalyst Controller 8-Channel Macro Controller Module (controller/function generator/sequencer module)
Cat: 995953 Rel: 31 Mar 24
 
8-channel macro controller module - 20HP
Notes: The Catalyst Controller is a macro controller with eight precision CV outputs and a responsive crossfader to morph between scenes. A scene is a snapshot of up to eight CV outputs, like a modular preset. Traverse a "pathway" composed of multiple scenes using the crossfader or an external CV signal, or immediately jump using the scene buttons. Record CV and slider movements, and play recordings back via a button or external trigger.

Each output has sub-millivolt precision and a maximum range of -5V to +10V. Channels have an adjustable morphing curve, can be quantized to common scales, restricted to a particular voltage range, or set to output gates.

Whether used as a CV preset manager, seamless transition generator, chord sequencer, CV recorder, or experimental CV playground, the Catalyst Controller puts control of your modular at your fingertips.

The Catalyst Controller can also turn into a Catalyst Sequencer! Hold down a special button combination to change between controller and sequencer modes. If you end up liking the Sequencer more, you can even remove the double-sided faceplate, flip it over, and re-install with the Sequencer artwork visible.

Based on the original Catalyst module from Emblematic Systems.

Specifications:

Smooth, responsive crossfade morphs between scenes
Eight output channels, each can be CV or Gate
Arrange scenes into pathways of up to 64 scenes
Smooth, responsive crossfader morphs from scene to scene along the pathway
Set slew/lag to limit how fast scenes can change
Adjustable Morph time per output
Control crossfading with an external CV
Record and playback up to 20 seconds of CV and crossfader motion
CV outputs can be set to -5V to +10V maximum, or limited to +/-5V, +5V, +3V, or +1V
CV outputs can be unquantized (sub-1mV resolution), or Quantized to common scales
Randomization of channel values/gates
Copy/paste
Based on the original Catalyst from Emblematic Systems

Pairs with: 4ms Catalyst Sequencer
Read more
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
est. release 31 Mar 24 $371.71
(No payment required now - pay when released)
FORTHCOMING
1010 Music USB-B Splitter Cable For Bluebox
Cat: 1000427 Rel: 31 May 24
 
USB-B cable splitter designed to be used with the Bluebox mixer & recorder
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
MRP:$10.56 SAVE 15%
est. release 31 May 24 $8.97
(No payment required now - pay when released)
FORTHCOMING
Korg Opsix Module 64-Voice Polyphonic Altered FM Synthesiser
Cat: 995067 Rel: 30 Apr 24
 
64-voice polyphonic altered FM desktop synthesiser
Notes: A new modular model that revolutionizes the music production environment.

Opsix Module is a digital synth like no other. The Opsix Operator Mixer simplified FM synthesis for the first time, making it not just comprehensible but also controllable. With the addition of extra synthesis capabilities and programming, it offered a more efficient workflow and an even richer sound.

Now, Korg has created a new form of Opsix, the module. This model supports MIDI 2.0 property exchange and poly aftertouch, and is an excellent companion to Keystage. It's also fully compatible with the sounds of the original Opsix, Opsix mk II, Opsix SE, and Opsix native software, as well as numerous excellent third-party libraries, keeping the updated sounds and software fresh. The new 19" rack-mountable enclosure has the same controls as the keyed models, yet is easily transportable and fits neatly into any studio or desktop production system.

MIDI 2.0 Property Exchange and Polyphonic Aftertouch support

With the latest software updates, all models of Opsix, hardware and software, now support MIDI 2.0 Property Exchange. Hundreds of the original factory sounds have been updated to include Polyphonic Aftertouch modulation (Channel Aftertouch is supported as well). All of this makes the Opsix module an excellent companion to KORG's Keystage controller.

Rack-Mount and Desktop

The Opsix module is cleverly designed for both desktop and rack-mount use. The panel is redesigned to fit into a standard 19" width, and the rear jack panel is recessed to allow easy access to cables even with gear mounted directly above. With desktop setups, brackets offer a choice of panel angles: flatter for performing standing up, or more upright for working while seated in your studio.

Many musicians have requested a module version of the Opsix. Now that components are once again available after a long period of supply-chain disruption, KORG is pleased to make that request a reality.

Main Specifications
Maximum Polyphony: 80 voices
Dimensions (W x D x H): 482 x 172 x 104 mm / 19.02 x 6.77 x 4.09 inch
Weight: 1.7 kg / 3.75 lbs.
Accessories: AC adapter

Sound generating system: Altered FM sound generator
Structure: 6 operators, 1 filter, 3 EGs, 3 LFOs, 3 effects, step sequencer, arpeggiator
Algorithm: 40 presets + user algorithm (unique to each program)
Operator: 6 modes (FM, Ring Mod., Filter, Filter FM, Wave Folder, Effect)
Oscillator waveform: 23 waveforms (Sine, Sine 12bit, Sine 8bit, Triangle, Saw, Saw HD, Square, Square HD, Additive Saw3, Additive Sqr3, Additive Tri3, Additive 12345, Additive 1+2, Additive 1+3, Additive 1+4, Additive 1+5, Additive 1+6, Additive 1+7, Additive 1+8, Noise S/H, Noise White, Noise Pink, Noise Blue)
Filter: 11 types (LPF 12, LPF 24, LPF MS-20, LPF POLY6, HPF 12, HPF 24, HPF MS-20, BPF 6, BPF 12, BRF 6, BRF 12)
EG: ADSR
LFO: 23 waveforms (Triangle, Saw Down, Saw Up, Square, Sine, Sample&Hold, Guitar, Exp. Triangle, Exp. Saw Down, Exp. Saw Up, Step4 Triangle, Step6 Triangle, Step4 Saw Down, Step6 Saw Down, StepRnd:Time, StepRnd:Lvl&Time, StepRnd:Level, Random:Time, Random:Lvl&Time, Triangle + , Saw Down + , Saw Up + , Square +)
V.Patch: 12 routings
Effect: 30 types (Chorus, Unison Ensemble, Phaser, Phaser (BPM) , Auto Pan, Auto Pan (BPM), Flanger, Flanger (BPM) , Rotary Speaker, Auto Wah, Exciter, Enhancer, LFO Filter, 3-Band EQ, Distortion, Guitar Amp, Decimator, Grain Shifter, Master Limiter, Compressor, Delay, Delay (BPM) , Autopan Dly, Autopan Dly (BPM), Tape Echo, Tape Echo (BPM) , Early Reflection, Reverb, Shimmer Reverb, Spring Reverb)
Sequencer: Step Sequencer (up to 16 steps, up to 6 notes per step)
Motion Sequencer (up to 6 lanes)
Arpeggiator: 7 patterns (MANUAL, UP, DOWN, ALT1, ALT2, RANDOM, TRIGGER)
Number of programs: 500 (350 preset programs and 150 user programs as the factory-set default)
Favourite: 64 (16 Slots × 4 Banks)
Controllers: MODULATION wheel, PITCH wheel, RATIO OP 1-6 knobs, LEVEL OP 1-6 sliders, DATA ENTRY A-F knobs

Inputs/outputs:
Headphone (6.3 mm stereo phone jack)
OUTPUT L/MONO and R (impedance-balanced 6.3 mm TRS phone jacks)
DAMPER (6.3 mm phone jack, half-damper not supported)
MIDI IN and OUT connectors
USB B port
Read more
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
est. release 30 Apr 24 $685.34
(No payment required now - pay when released)
FORTHCOMING
TipTop Audio Vortex ART Wavetable Module
TipTop Audio Vortex ART Wavetable Module (oscillator/digital/dual/stereo module)
Cat: 947139 Rel: 31 Mar 24
 
ART wavetable dual oscillator mono voice source module - 8HP
Notes: An ART wavetable dual oscillator mono voice source that can be used to build polyphonic patches and multi voice patches. It generates its harmonically rich sound using two 80s vintage D/A converters to feed your filters and effect processors. VORTEX comes loaded with dozens of wavetables, plus additional user wavetables can be loaded from the front panel SD card. A detune knob controls the second VCO and adds effects from deep phasing to a sub octave. The position knob and CV input selects waves in the tables and vibrato from LFOs to create FM. Like other ART sound generators a dedicated Gate output manages the voice envelope or any modulation synced to that voice. VORTEX is a great companion to the analog ATX1 and a must for digital synthesist enthusiasts.

Size: 8HP - Depth: 40mm / 1.5"
Power: +12V 80mA / -12V 25mA
Read more
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
est. release 31 Mar 24 $244.99
(No payment required now - pay when released)
FORTHCOMING
Artiphon Corda USB-C MIDI Polyphonic Expression Controller/Synthesiser/Sampler (white)
Cat: 970201
 
A smart synth, looper and MIDI controller that adapts to the way you play: strum, tap, slide and tilt any sound in the world.
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
coming soon $227.04
(No payment required now - pay when released)
FORTHCOMING
Tangible Waves AE Modular Grains Granular Sound Player/Multi-Purpose Digital Sound Module
Cat: 967218
 
Arduino compatible granular sound player or multi-purpose digital sound module.
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
coming soon $59.66
(No payment required now - pay when released)
FORTHCOMING
TipTop Audio ATX1 VCO ART Analogue VCO Module
Cat: 947141 Rel: 31 Mar 24
 
Analogue voltage controlled oscillator module - 8HP
Notes: A classic all analog saw VCO core with 3 switchable modes, ART, 1V/Oct, LFO and is recommended as the basic building block for ART systems. It is designed for patching analog polyphonic synths from discrete modules or multi-mono patches in ART mode. When using ART the ATX1 takes care of the tuning including accounting for temperature changes. In 1V/Oct mode the ATX1 runs as a standard old school modular VCO. LFO mode drops the frequency range and is great for patching vibrato to other ATX1s among other things. The ATX1 outputs variable waveshapes with manual or CV control. Classic FM, PWM and hard sync are provided. A dedicated Gate Out in ART mode manages the voice envelopes or any modulation synced to that voice. We consider the ATX1 the best sounding analog VCO we ever created.

Size: 8HP - Depth: 40mm / 1.5"

Power: +12V 105mA / -12V 33mA
Read more
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
est. release 31 Mar 24 $224.92
(No payment required now - pay when released)
FORTHCOMING
Teenage Engineering EP-133 KO II Splash Cover
Cat: 996322 Rel: 30 Apr 24
 
Cover designed to fit the EP-133 KO II
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
est. release 30 Apr 24 $30.63
(No payment required now - pay when released)
FORTHCOMING
Teenage Engineering EP-133 KO II Soft Bag With Strap
Cat: 996330 Rel: 30 Apr 24
 
Bag designed to fit the EP-133 KO II
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
est. release 30 Apr 24 $72.86
(No payment required now - pay when released)
FORTHCOMING
UDG Ultimate Straight USB 3.2 Type C-C Audio Cable (red, 1, 5m)
Cat: 992116 Rel: 30 Apr 24
 
Straight USB 3.2 type C-C audio cable
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
est. release 30 Apr 24 $19.00
(No payment required now - pay when released)
FORTHCOMING
Collision Devices TARS Fuzz Effects Pedal With Analogue Filter (black on white)
Cat: 971909
 
Fuzz effects pedal with analogue filter.
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
MRP:$357.98 SAVE 12%
coming soon $315.75
(No payment required now - pay when released)
FORTHCOMING
Artiphon Corda USB-C MIDI Polyphonic Expression Controller/Synthesiser/Sampler (black)
Cat: 970189
 
A smart synth, looper and MIDI controller that adapts to the way you play: strum, tap, slide and tilt any sound in the world.
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
coming soon $227.04
(No payment required now - pay when released)
FORTHCOMING
Blue Lantern Modules Shimm Fully Voiced High Hat Module
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
est. release 29 Feb 24 $140.44
(No payment required now - pay when released)
FORTHCOMING
Folktek Alter 1 Effects Processor Module
Folktek Alter 1 Effects Processor Module (delay/effect/filter/reverb/dual/stereo module)
Cat: 983092 Rel: 29 Feb 24
 
Effects processor module - 16HP
Notes: Alter is an effects processor for Eurorack format. There are two versions of the Alter which are visually identical except the names "Alter 1" and "Alter 2". This is Alter 1. Internally, 1 & 2 have an entirely different set of effects from the other. Each version features 7 unique and meticulously designed DSP effects.

Control

- Controls for mix, X, Y and Sift as well as clock.
- All effects have a variation of a filter which may change effect to effect.
- X and Y control various rates, feedback and time over the different effects (note that some of the images shows a prototype which says "rate" under two of the pots. The faceplate has been changed to X and Y).
- Clock control adjusts the rate which controls the DSP which can drastically change the effect. In doing so it does slightly lower the quality of the output signal but the results are fantastic. This clock is not for synchronization.
- Mix, X, Y and Sift all have CV control inputs.
- Each control level or CV input is visualized on the control panel.

Ins and outs

- Stereo inputs with separate level/gain control for right and left channels. These levels can also act as mute as it can take the signal to 0. They can also add gain to a quiet signal.
- Peak level indicator for clipping levels at the input
- Mono input is made stereo within the DSP and outputs to both left and right channels
- Stereo outputs for right and left channels

Effects

The effect is selected by the hexagonal touch pad. The effects for Alter 1 are as follows:
1 - long delay
2 - tight, notated granular delay
3 - plate reverb
4 - shimmering reverb
5 - distortion multi-filter
6 - pitch delay
7 - stutter glitch

Specs

Includes printed manual
+12V: 160mA
-12V: 0mA
+5V: 0mA
16HP width
25 mm Depth
Read more
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
est. release 29 Feb 24 $307.30
(No payment required now - pay when released)
FORTHCOMING
Kiviak Instruments Wofi 10-Voice Polyphonic Sampler Keyboard Synthesiser
Cat: 1000935 Rel: 30 Apr 24
 
10-voice polyphonic sampler keyboard synthesiser & sequencer
Notes: WoFI is a portable Sampler keyboard that connects to the internet via WiFi, and features an innovative effect module called Texturer that combines elements of shimmer and granular synthesis to create unique and fascinating sounds. Its compact size and intuitive interface make it an ideal tool for musicians and producers who are always on the move. In addition, WoFI comes with a rechargeable battery, allowing you to create music anywhere you go without worrying about power. You can also share your patches and access sound banks from other sound designers through the mywo.fi community platform. Whether you're a beginner or a seasoned professional, WoFI offers endless possibilities for exploring new sonic territories and creating unique sounds.

Features

Player

The Player let you colour your sound with our emulations of classic samplers and their different sample player modes. Make it clean, dirty or anywhere in between.

Enveloppe

Sculpt your sound with the Enveloppe that can be assigned to WoFi's amp, filter or even both.

Manager

With the Manager and its display, get a visual feedback on all your tweakings, manage your sample library, access to mywo.fi content through WiFi and play with the touch strip. Oh, and there is no subscription needed for mywo.fi. Having WoFi gives you free access to community.

Filter

The Filter let you play the WoFi like classic subtractive synthesizers. It's a digital low-pass filter with two different slopes (12dB and 24dB) and a tasty resonance.

Texturer

The Texturer is here to bring you to unexplored sonic territories. Elevate your sound with this effect halfway between a shimmer FX and granular synthesis.

LFO

The LFO let you modulate your creation. With three different wave shapes, assign it to any parameter of the front panel and give motion to the sound.

Sequencer

The Sequencer let you build melodic patterns with the 16 polyphonic steps. It can be used as an arpeggiator. You can have your two hands free to play along the sequence and tweak your sound while it is looping. Oh, and you can also step sequence parameters, which makes it another modulation source in addition of the LFO and the Enveloppe.

Recorder

The Recorder let you either capture a sample from the line in or directly from the built-in microphone. It's easy as pie, pick your audio source with the switch, click on record and voila. Just like with the iconic first keyboard samplers.

Master

The Wofi is made to be played in many contexts, from your couch to the studio, so it has a full connectivity and two stereo audio outputs: one for your headphones and one for a master line-out and the WoFi internal speaker. Set your volumes easily.

Technical details

Player
- 48kHz 16 bits
- Direct streaming from flash, no preloading
- Polyphony 10 voices

Recorder
- 48kHz 16 bits mono
- Line / dynamic microphone / integrated microphone
- Gain adjust -6dB + 22dB
- Eurorack level compliant

Memory
- Flash embedded memory : 100 Mbytes, Flash cartridge memory : 100 Mbytes, Up to 200 User Patches + 50 Presets

100 MB allows storing 18 minutes of audio

Sequencer
- 16 steps track for notes
- 16 keys track for parameters sequencing


DSP
- Real time processing (No Preprocessing)
- Interpolation modes: sample & hold, linear, whittaker-shannon
- Pitch shift
- Time stretch
- Bit crusher
- Texturer
- Machine rendering emulation
- Resonant state variable filter (12dB/o-24dB/o)
- Parameter modulation from different sources : enveloppe, LFO, sequencer automations, external modulation (CV/MIDI), after touch, touch strip
- Texturer: self mixing renderer based on granular sampling - 8 grains - multi tap harmonizer

File servicing
- Direct file system management through USB
- Embedded sample editor

Network
- WIFI connectivity, up to 16 key pass
- Cloud access: Patch / Sample upload and download, sharing or backup.

Connectivity
- Sync clock + start/stop
- CV input, Gate input
- CV output, modulation output, gate output
- MIDI in, out, through DIN+USB
- Line In, Line out, Headphones


Miscellaneous
- USB powered
- Embedded battery - roughly 4h autonomy
- Integrated Microphone
- Integrated Speaker
- Full backup to Cartridge or mywo.fi
- User friendly workflow


- Aluminium / wood body
- Dimensions: 52cm x 23cm x 7cm
Read more
Pre-orders at Juno

This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.

We'll keep you informed of your order at every stage, and let you know if the release date changes.

If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.

If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.
est. release 30 Apr 24 $718.08
(No payment required now - pay when released)
Artikel 1 bis 50 von 156 auf Seite 1 von 4 anzeigen
1  2  3  4  »
Cart subtotal: