Vinyl Record Weights | Turntable Weights

Notes: Any vibrations in the record during playback will be picked by the cartridge and will be reproduced by the amplifier and speakers causing muddy sound, distortion and reduced detail. In order to avoid record vibrations you must make sure that the contact between the record and the platter is as perfecrt as possible.The tonar record clamp presses the record flat against the platter. Put the record on the turntable and then put the clamp on the spindle, press down & turn the knob to tighten. The weight of the clamp is minimal so it can be used on any record player with a fixed spindle.

Also many older manufactured records are warped to varying degrees, this causes big problems for the diamond stylus of the cartridge to track the grooves properly. The stylus pressure fluctuates as the stylus moves up and down while trying to track the warps. With bad results: muddy sound reproduction with distortions and if the turntables drive isn't really strong... audible flutter. In some cases the stylus may actually loose contact with the groove causing a hissing sound. Using the Tonarclampit will press the record onto the turntable platter, and the problematic surface will be flattened while you play the record causing a dramatic improvement of the reproduced sound on old records.

Take care that the platter bearing of your turntable is able to accept the additional weight of 760 g. If in any doubt please consult your record player instructions or your dealer before buying or using this weight.

760 grams Brass weight
Covered with black enamel for protection
Measurements: 78 mm x 25 mm

Base covered with felt to protect the record label

Notes: The sound performance of a vinyl playback system can be significantly improved when all unwanted resonances between the record and the platter can be reduced during playback. Enter record clamps and pucks; simple devices which are designed solely to ensure the record and platter surfaces are held together tightly.

Standard record pucks, that use only weight to achieve this aim, can have 2 disadvantages:

- The weight can induce higher levels of rumble, when used with lower cost turntables which have smaller main bearings
- Instead of tightening the records surface to the platter, heavy weight record pucks can cause the opposite to happen and potentially warp the vinyl record into a slight 'bowl' shape

Pro-Ject's Clamp-IT is one of the most competent solutions available. It is a stylish accessory with a clamp mechanism around the centre spindle, that will not add weight but will press the record against the platter. The Clamp-IT also allows you to fine-adjust the pressure depending on the condition of your warped records.

Fitting of Pro-Ject's Clamp-IT is easily done, and once it's in place it won't only please your ears; because its beautifully machined diamond-cut edges will also stand out on any turntable!

Notes: The Recordcase Vinyl Stabilizer gets the most out of your record collection. The VS-10 is mounted on the middle of the turntable. Thanks to its high dead weight, it stabilizes the record and ensures a smoother run and an improvement in sound quality. The integrated spirit level allows the optimal alignment for the best run of the record.

No matter whether in loud environments where the bass vibrations interfere with the optimal reproduction of the record or at home to optimize the audio quality. The Disk Stabilizer is an indispensable tool for DJs and music enthusiasts and should not be missing in any setup.

Technical data:
Weight: 290 gram

Notes: Tonar Misty Record-Clamp - 'foggy' transparent. The Tonar Misty plate clamp is the perfect alternative if a "plate puck" is too heavy for your turntable.

Notes: Level up your vinyl sound with these stylish record weights...

Designed to keep your records flat on the platter, improve traction & tighten up your sound.

Record weight / puck / stabiliser

Reduce resonance, vibrations & feedback

Reduce skipping, improves stability & sound quality

Heavyweight Construction (570g)

Solid Stainless Steel

Precision Engineered

Includes Free Protective Box

Speedy Shipping

Money Back Guarantee

70mm x 70mm x 22mm

Notes: Super solid vinyl record clamp with reduction on 7' records.

This dual-purpose clamp is a perfect solution for any vinyl lover or DJ.

Optimised weight will reduce any vibrations or feedback. This clamp will help to flatten warps records and stabilise the disc.

7' adapter will pull off when big hole record is placed under the clamp.

Each clamp/stabilizer comes with wooden sapeli box - strong magnetic lock

This clamp is precision milled on CNC machine.

Designed for your listening pleasure

Made in EU


Height: 26mm
Diameter: 77mm
Packaging: wooden sapeli box - strong magnetic lock

Notes: Varia Instruments' turntable weights feature a smart mechanism: The 7" adapter inside the weight is moveable, as soon as you put the weight on a 7", the adapter will fall down through the big hole of the vinyl. Your record is now centered and stabilized by the TTW10. If you place the kit on a 12" record, the adapter will remain in the rear position and stabilizes your warped records. A sticky rubber mat on the bottom side protects your vinyl and allows you to control the record in a very direct way. The TTW10 comes in a neat printed box with a linen bag to take it out to your gigs.

Notes: Varia Instruments' turntable weights feature a smart mechanism: The 7" adapter inside the weight is moveable, as soon as you put the weight on a 7", the adapter will fall down through the big hole of the vinyl. Your record is now centered and stabilized by the TTW10. If you place the kit on a 12" record, the adapter will remain in the rear position and stabilizes your warped records. A sticky rubber mat on the bottom side protects your vinyl and allows you to control the record in a very direct way. The difference to the classic TTW10 is the material used for the outer part: The heavy weight edition is machined out of high-grade stainless steel which results in a final weight of 808g/1.78lbs. The TTW10H comes in a neat printed box with a linen bag to take it out to your gigs.