100% Sicheres Einkaufen

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Sicheres Einkaufen

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Today: Studio Equipment

View:
Options
Artikel 1 bis 12 von 12 auf Seite 1 von 1 anzeigen
Monday 25 March 2019
Cat: 725948 Rel: 25 Mar 19 • View all Synth module accessories
 
Ribbon controller for the Field Kit
Notes: This is an awesome addition to the Field Kit. Slide your finger over the Softpot and the voltage will increase and decrease. The Softpot has a hold function, so you can play it like a keyboard, outputting voltages that are very useful to control motors and casually search through the radio bands, or to control a hacked walkman!

The product consists of:

- Field Kit Linear Softpot Sensor
- 1 x Dupont 3 contact cable to connect the Sensors to the Field Kit
Read more
 5 in stock $27.81
Cat: 725945 Rel: 25 Mar 19 • View all Synth module accessories
 
Sensor Pack A - features five useful components for owners of the Field Kit
Notes: The Field Kit Sensor Pack A consists of 5 sensors:

- Button/Jack
- Electret Microphone
- Light Sensor
- Temperature Sensor
- Ball Switch
- 2 x Dupont 3 contact cable to connect the Sensors to the Field Kit

Button/Jack:

This is rather a utility tool than an actual sensor. It allows you to either use a pushbutton or any CV-Signal (0- 5V) as a signal source. You can select to either use the button or any signal connected to the jack input with the jumper located right next to pin-header. The voltage present at the output upon a button press can be selected with the two jumpers next to the button. The button and jack can be used with both the ANALOG IN and the DIGITAL IN of the Field Kit's Sensor Interface.

Electret Microphone:

The electret microphone provides a simple solution to use your surroundings as a sample source. The board features a little trimmer to adjust the gain of the microphone pre-amplifier. Use a little screwdriver to adjust the gain according to the printing on the sensor board. It's preferable to adjust the signal level with the trimmer first and only use the level pot of the analog signal interface as a second adjustment stage. The electret microphone has an omnidirectional directivity and is capable of capturing the whole frequency spectrum from 20 to 20000 Hz. The electret microphone is best be used with the ANALOG IN of the Field Kit's Sensor Interface.

Light Sensor:

The light sensor will change the output voltage depending on the light intensity. The spectral sensitivity is similar to the human eye, covering the full spectra of visible light, with a peak at 570nm (green/yellow). The change of the voltage according to the light intensity can be set with the three jumpers on the board. Set those jumpers according to printing on the board. The light sensor can be used with the ANALOG IN and the DIGITAL IN of the Field Kit's Sensor Interface.

Temperature Sensor:

The temperature board features two output modes: a continuous CV or a trigger.

CV Mode: The board will output a continuous voltage in range 0 - 5 V depending on the measured temperature and scaled to the set lower and upper temperature limit.

Trigger Mode: The board will generate a trigger whenever the measured temperature rises above the set upper limit temperature. LED 1 will blink whenever a trigger is generated. The sensor covers a temperature range from -55-C to +125-C.

Ball Switch:

The ball switch consists of a little bouncy ball jumping around in a container connecting two contacts and thus acts like a switch. In contrary to a normal push button, which has very well defined states, the switching of a ball switch is more similar to a percussion shaker. There are two resting-positions which define a certain state of the switch: the board is lying flat on the table with its bottom facing the table: the switch is open the board is lying flat on the table with its top facing the table: the switch is closed. The voltage assigned to those states can be set with the two jumpers on the board. Refer to the printing on the board to identify the position that suits your needs. The ball switch can be used with the ANALOG IN and the DIGITAL IN of the Field Kit's Sensor Interface.
Read more
 5 in stock $53.95
Click for better price!
quote 725945
Cat: 725946 Rel: 25 Mar 19 • View all Synth module accessories
 
Sensor Pack B - features three useful components for owners of the Field Kit
Notes: The Field Kit Sensor Pack B consists of 3 sensors:

- Accelerometer
- Capacitive Touch
- Sequential Voltage Source
- 2 x Dupont 3 contact cable to connect the Sensors to the Field Kit

Accelerometer:

This board measures acceleration along three axis. Those measurements are used to generate CV signals or triggers. The accelerometer board features three modes:

- Tap Detector with continuous CV output
- Tap Detector with trigger output
- The 'motorcycle mode'

Capacitive Touch:

Connect the Capacitive Touch to organic items and use them as a controller, the Field Kit Sensor Interface will send out signals once you touch the matter. Banana rock, Cucumber Swing, Avocado Samba!

Sequential Voltage Source:

The Sequential Voltage Source is a little magical module which you can use in your musical setup quite easily and allows your Field Kit to become a Sequencer too. This board has three different modes: Stepped Random Voltage, CV Sequencer and a Euclidean Trigger Sequencer.
Read more
 5 in stock $53.95
Click for better price!
quote 725946
Cat: 725367 Rel: 25 Mar 19 • View all Decksavers + DJ equipment covers
 
Protective cover specifically designed to fit the Akai Fire
Notes: Engineered in the UK specifically for the Akai Professional Fire Controller, a tough but lightweight polycarbonate shell protects from dust, liquid and accidental impact. Precision moulded for an exact fit whilst accommodating cables, your Akai Professional Fire can sit ready for operation. Slides straight into a flight case or bag ready for transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.
Read more
 2 in stock $30.29
Cat: 725369 Rel: 25 Mar 19 • View all Decksavers + DJ equipment covers
 
Protective cover specifically designed to fit the Novation Bass Station 2
Notes: The tools we use to compose and produce music are dear to our hearts. Dust, liquid and accidental impact have taken many a good analogue synth down over the years - this is where Decksaver steps in. Precision trimmed for perfect fit whilst accommodating cables, the Bass Station 2 can sit ready for operation. Slides straight into a flight or soft case for maximum protection during transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.
Read more
 4 in stock $42.94
Click for better price!
quote 725369
Cat: 714708 Rel: 25 Mar 19 • View all Synth modules
 
Controller module for static & dynamic control of RGB LED stripes - 4HP
Notes: Module A-197-3 is a control unit for RGB LED stripes. The LED stripe is glued e.g. to the inner edges of the cases A-100P6/P9/PMS6/PMS9/PMS12 to illuminate the modules and patching statically or dynamically. Especially during live events the dynamic illumination in sync with the sound is an eye-catcher. Each colour (red, green, blue) has available a manual control for the background brightness and a CV input with attenuator that enables the dynamic brightness controlled by other control voltages of the modular system. For example three envelopes can be used which also control the loudness or filtering of sound processing modules. But even other control applications are possible, e.g. LFO, random voltages, clock/gate/trigger signals, sequencer, Midi-to-CV.
Read more
 1 in stock $78.18
Click for better price!
quote 714708
Cat: 725952 Rel: 25 Mar 19 • View all Synth modules
 
Two flexible mixers & function generator in one module - 18HP
Notes: The Control Voltage Processor from Verbos Electronics GmbH is a suite of control voltage processing possibilities divided into 3 sections in a slim 18HP package. The lower 2 sections are DC coupled mixers that allow mixing, inverting, offsetting, scaling, multiplying, dividing, crossfading or a combination of these functions. The top section is a voltage controlled slewing processor with independent control of Positive and Negative slew rate, with some unique tricks. The Positive and Negative slew, or Rise and Fall rates if you like, have reversing attenuators. The slopes can be blended from linear to RC curves (starting all slides fast and ending slow, like a proper "East Coast" Portamento) without a change in speed. It can be triggered like an AD envelope and has a Gate out that goes high when the CV out is below 100mV. Of course it can loop by patching the Gate out to the Trigger in. The Bounce control adds a unique flare of overshoot to CV changes, a bit like the effect of stopping a tape reel from turning and then letting it go. The combination of multiple voltage processors offers the user the functions of analogue computer.
Read more
 1 in stock $538.54
Click for better price!
quote 725952
Cat: 725954 Rel: 25 Mar 19 • View all Synth modules
 
Touch-sensitive, multi-dimensional 12-channel CV controller with master section - 42HP
Notes: The Mini Horse from Verbos Electronics GmbH is a multi-dimensional touch activated voltage controller. At 42HP wide and ultra thin, it can be added to a synthesizer system either inside the Eurorack or out front in the forthcoming Black Box extra low profile powered enclosure. Twelve keys run across the front, each with its own Gate out, Pressure out and Position out. In addition to the individual keys' outputs the master section presents the parameters of which key was last pressed in addition to a tuneable from the knob behind the key and a "Fixed" voltage, spanning from 0-10v across the keys from left to right. Position outs have memory of their position when last touched, allowing the user to draw a mix across the keys when connected to voltage controlled mixers as in the Harmonic Oscillator or Bark Filter Processor.
Read more
 1 in stock $657.49
Click for better price!
quote 725954
Cat: 725374 Rel: 25 Mar 19 • View all Microphone accessories
 
1x Mini Windjammer for Sennheiser Memory Mic
Notes: Rycote Mini Windjammers are easy-to-fit, slip-on fur covers that provide excellent wind protection. Designed use with camera microphones, portable recorders and mic foams, Mini Windjammers provide outstanding protection in applications such as outside broadcast and documentary film. Originally developed by Rycote, the Windjammer is a high-quality, synthetic fur-cover that provides excellent protection against extreme wind-noise.
Read more
 1 in stock $36.33
Cat: 725375 Rel: 25 Mar 19 • View all Microphone accessories
 
1x Mini Windjammer for Zoom H3-VR
Notes: Rycote Mini Windjammers are easy-to-fit, slip-on fur covers that provide excellent wind protection. Designed use with camera microphones, portable recorders and mic foams, Mini Windjammers provide outstanding protection in applications such as outside broadcast and documentary film. Originally developed by Rycote, the Windjammer is a high-quality, synthetic fur-cover that provides excellent protection against extreme wind-noise.
Read more
 1 in stock $44.04
Click for better price!
quote 725375
Cat: 725376 Rel: 25 Mar 19 • View all Microphone accessories
 
1x Mini Windjammer for Shure MV88
Notes: Rycote Mini Windjammers are easy-to-fit, slip-on fur covers that provide excellent wind protection. Designed use with camera microphones, portable recorders and mic foams, Mini Windjammers provide outstanding protection in applications such as outside broadcast and documentary film. Originally developed by Rycote, the Windjammer is a high-quality, synthetic fur-cover that provides excellent protection against extreme wind-noise.
Read more
 1 in stock $36.33
Cat: 725921 Rel: 25 Mar 19 • View all Speaker stands, pads & mounts
 
4 x isolators with rugged aluminium housing for positioning under heavier gear
Notes: The Stage 1 isolators effectively eliminate the vibrational variables that touring musicians experience while playing onstage in a variety of venues and locations, enabling them to have consistent, clear sound night after night. Enjoy Consistent results with greater sound clarity and focus, every time you play.

Awesome Sound. Stage to Stage. Studio & Home:

The Stage 1 isolators are rated for up to 200 lbs per set of four and are designed for equipment ranging from small bass combo amps to stacked 4-12 cabinets

The Stage 1 can be fastened to the underside of plywood to create an isolation platform, or fastened directly to the bottom of the Guitar/Bass amps, cabinets, subwoofers or stage monitors.

Use the Stage 1 isolators in the studio when tracking to capture that tight open sound, or at home to give your neighbours a break from the bass booming through the structure.

Enjoy consistent results every time you play.

Package contains:

4 - Iso Acoustics Stage 1 isolators
16 - #10 x 3/4" (19mm) wood screws
Read more
 1 in stock $142.07
Artikel 1 bis 12 von 12 auf Seite 1 von 1 anzeigen

Filter

Today: Studio Equipment
Close