Suchergebnisse: Dance Music

Notes: ***B-STOCK: Box opened, product in perfect working order***


ALM Eurorack cases are available in a range of sizes all including an integrated powered bus boards.

The cases all feature anodised aluminium construction, an on/off switch, rubber feet, and high quality switched powered bus boards with numerous keyed headers and ample power capacity.

These are simple and compact Eurorack cases, perfect for small, focused systems, taking along on travels, or as a tabletop addition to a larger setup.

Cases are available in 4 sizes; 3U 84HP / 6U 84HP / 3U 52HP / 6U 52HP sizes. They all offer 1 Amp on both the -12V and +12V rails per row.

Great modern cases

The ALM powered Eurorack case was originally designed for the System Coupe. Wider interest has seen it evolve into a range of different sized cases being made available by themselves.

A fixed solid bus board provides quality ample power and plentiful keyed power connectors. The shielded DC/DC power converter is low noise and includes overload and short circuit protection. Fixed, quality mounting rails are used over sometimes frustrating sliding nuts. The case has a great looking all anodised aluminium construction that is both strong and light.

The case proportions are designed to look great on a table or desk (not too deep, just enough) and also be easy to fit in a bag and transport.

Decksaver case covers are available currently for the 3U/84HP, 6U/52HP, and 6U/84HP cases.

3U / 52 HP

Provides up to 1 Amp power on each -12V & +12V rails.
Connections for up to 9 modules.
Includes 2 Amp power 'brick'

Notes: Pods are a perfect way to get started in Eurorack, or add more modules to your monster system!

Made from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go set ups. The power supply can handle up to 2.0A of +12V, which is plenty of juice for even the most modern digital modules. (Or if you prefer to DIY your power supply, Pods sized at 64hp and below are also available unpowered)

Each Pod104X typically will house up to 13 modules, but more can be accommodated using a multi-power cable accessory.

Mix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Pods can even daisy-chain with the 4ms Row Power system, making them a convenient outboard skiff. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!

Notes: ***B-STOCK: Box opened, product unused & in perfect condition***


Mantis have taken years of experience with Eurorack to create a low-cost case that makes the Eurorack modular synthesizer look, work, and feel like a professional instrument. Mantis is an instrument that is at home on stage, touring, or in the center of the studio.

Mantis has two rows of 104HP for you to rack your modules. It comes fully powered and assembled, just drop in your modules and play.

Using its sophisticated leg mechanism, you can set it to three different positions: 0, 45, and 90 degrees.

Power Power and more Power! With Mantis, say bye-bye to the tedious, never-ending calculation of current consumption for the i12V power. Mantis comes with a juicy Zeus power supply that delivers plenty of power both now and for the future.

Mantis deep black coloru gives you another option to customize your Eurorack look and matches perfectly with black Tiptop Audio modules.

Mantis comes with real Z-Rails made according to Eurorack enclosure standards. No sliding nuts or wrong spacing! It also has keyed power connectors to help protect your modules from damage from plugging the power in in reverse.

Weighing only 3kg/6.5lb, Mantis is so light, traveling has never been so relaxed.

Dual Mantis Studio Brackets

Using the optional bracket accessory Mantis can be doubled up to 416HP! Multiply your Mantis and watch your studio setup grow.

Notes: Protect the faders on your favorite modules while making them more comfortable to use at the same time!

Perfect size for modules like the WMD Performance Mixer, Malekko Voltage Block, STG Graphic Sequencer, TTSH, Roland JU-06, and more. Custom sized to fit faders snug and clear in color so you can still see the LED indicator. The WMD clear fader cap is a must have for any module with plastic faders.

Notes: LED CV 3.5mm mono patch cables

Visualise your patches like never before

Super slim aluminium barrel
Durable construction - Ultra flexible TPE cable
3.5mm mono jack connector

Compatibility

Works with CV patch signal, designed by us for modular and semi modular synthesisers
Great for Clocks, Gates and Trigger signals.

Please note: You may see a very small drop in voltage as the LED's do requires a small amount of power. May not be suitable for very voltage sensitive patches.

Notes: LED CV 3.5mm mono patch cables

Visualise your patches like never before

Super slim aluminium barrel
Durable construction - Ultra flexible TPE cable
3.5mm mono jack connector

Compatibility

Works with CV patch signal, designed by us for modular and semi modular synthesisers
Great for Clocks, Gates and Trigger signals.

Please note: You may see a very small drop in voltage as the LED's do requires a small amount of power. May not be suitable for very voltage sensitive patches.

Notes: LED CV 3.5mm mono patch cables

Visualise your patches like never before

Super slim aluminium barrel
Durable construction - Ultra flexible TPE cable
3.5mm mono jack connector

Compatibility

Works with CV patch signal, designed by us for modular and semi modular synthesisers
Great for Clocks, Gates and Trigger signals.

Please note: You may see a very small drop in voltage as the LED's do requires a small amount of power. May not be suitable for very voltage sensitive patches.

Notes: LED CV 3.5mm mono patch cables

Visualise your patches like never before

Super slim aluminium barrel
Durable construction - Ultra flexible TPE cable
3.5mm mono jack connector

Compatibility

Works with CV patch signal, designed by us for modular and semi modular synthesisers
Great for Clocks, Gates and Trigger signals.

Please note: You may see a very small drop in voltage as the LED's do requires a small amount of power. May not be suitable for very voltage sensitive patches.

Notes: LED CV 3.5mm mono patch cables

Visualise your patches like never before

Super slim aluminium barrel
Durable construction - Ultra flexible TPE cable
3.5mm mono jack connector

Compatibility

Works with CV patch signal, designed by us for modular and semi modular synthesisers
Great for Clocks, Gates and Trigger signals.

Please note: You may see a very small drop in voltage as the LED's do requires a small amount of power. May not be suitable for very voltage sensitive patches.

Notes: LED CV 3.5mm mono patch cables

Visualise your patches like never before

Super slim aluminium barrel
Durable construction - Ultra flexible TPE cable
3.5mm mono jack connector

Compatibility

Works with CV patch signal, designed by us for modular and semi modular synthesisers
Great for Clocks, Gates and Trigger signals.

Please note: You may see a very small drop in voltage as the LED's do requires a small amount of power. May not be suitable for very voltage sensitive patches.

Notes: ***B-STOCK: Box opened, product in perfect working order***


***POWER SET FOR EU AND AUSTRALIA 220-230V:
The Pittsburgh Modular Structure 208 and Structure 360 eurorack enclosures use a switching power supply that needs manually set to the correct AC input voltage. The internal switch has already be properly set for 220-230 VAC. This setting works for the EU and Australia or other countries that use 220-230 VAC power.
For use in countries that use 100-120 VAC power, such as North America and Japan, the switch inside the case on the AC/DC regulator needs to be switched to the left. The switch is marked with a Yellow sticker printed with "AC input voltage can be selected by switch. Check input voltage avoiding damage before power on." The switch is located on the side of the enclosure below the arrow.
Please contact Pittsburgh Modular with any questions. [email protected]***

Structure EP-208 Eurorack Enclosure -

Maximum Power for a New Generation



Beautifully stained hardwood double row, 208hp powered eurorack travel case with lid. Includes professional, heavy duty, internal power supply designed to exceed the needs of the most demanding analog and digital eurorack systems.




Everything is New:

With years of research and two case lines under our belt, we decided to start over and produce a line of cases for the next generation of eurorack synthesizers. The eurorack modular ecosystem is expanding faster than ever and manufacturers are constantly pushing eurorack cases and power supplies to the limits. What started as a power supply designed to drive primarily analog synthesizers has transformed into a supply that needs to simultaneously meet the unique demands of sensitive analog circuitry, power hungry digital processors, and ground sensitive user interface modules.

We started with what matters most. Clean power. A lot of it. Up to 3x the amount of clean power available in cases from other brands. Next we turned our focus to the enclosure itself and there was only one goal. Make the case stronger. Our engineers tested countless combinations utilizing different types of wood, joints, adhesives, assembly techniques, and hardware to ensure that Structure cases are as durable as they are beautiful.

With a clean and gorgeous design that promotes creative exploration, the Structure enclosures are our most robust and refined case line yet. With massive amounts of both room and clean power, you can reach completely new heights in your creative performances.




Features:

Structure EP-208 Power:
4 Amps of Clean +12v Power

3 Amps of Clean -12v Power

2 Amps of Clean +5v Power

Custom Powered Bus Board with 15 Keyed Eurorack Power Headers Per Row, 30 Power Headers Total

External On-off Rocker Power Switch with LED

Universal IEC Power Connector Works Anywhere



Structure EP-208 Enclosure
:
Hardwood and Steel Construction (No cheap plastic here)

Dual 104hp Rows

Removable Lid

Lid Fits Over Fully Patched System (No need to remove patch cables)

Edge to Edge Rail Design Reduces Gaps Between Modules and the Side of the Case

20 Smooth Sliding Square Nuts Per Rail (Holds up to 40 modules)

Beautifully Hand-Stained Hardwood

Matching Black Steel Hardware Set


Structure EP-208

Dimensions
:
External Depth with lid:9 1/4"
External Depth without Lid: 5 1/2"
External Height: 12 1/4"
External Width: 22"
Internal Depth Above Power Supply: 2 3/4"
Internal Depth Above Bus Board: 3 3/4"
Internal Depth Above Nothing: 4 1/4"

Notes: They are not just blanks, they are MULTS! Each white line connects holes which are electrically connected. Nicely fits the tip of a patch cable for a quick-n-easy signal splitting.

OR

The holes are sized for screws to fit, but not fall through, acting as a handy screw holder!

OR

Use it as a vent for your toasty warm skiff!

Notes: It's always nice to have some extra power cables handy. Omnitone's standard modular power cables come in a pack of 5. Each power cable is 26cm (~10 inches) long.

Notes: ***B-STOCK: Box opened, product in perfect working order***


This is the powered version that includes the case as described here, a Strom+ module, a Strom power supply (AC/DC adapter) and a Strom busboard with connector cable. You only need to plug modules into the case and you’re ready to go!

One case fits 84HP of modules with a depth of 70mm.

The cases can be used with an incredible amount of flexibility to swap in an out full rows and create larger setups using the Case Connectors and Case Standoffs.

The side cheeks are made of high-quality Finnish plywood and are coated with a durable transparent melamine film. The black surface is hardwearing and crack resistant as well as easy to clean.

All cases are shipped with a set of 4 rubber feet and 50 x M3 screws.

Notes: polytip is Tiptop Audio's new type of modular synthesiser patch cable that can pass multiple audio channels using minimal panel space. This innovative design finally adds to modular the capability to patch more than one signal at a time and unleash the full potential of polyphonic patching between modules. Polytips uses the industry standard USB Type C connector although it is not a USB cable (and USB cables do not work with Polytip). Internally multiple lines of shielded analog audio lines pass from end to end with excellent sound quality.

Notes: Polytip is Tiptop Audio's new type of modular synthesiser patch cable that can pass multiple audio channels using minimal panel space. This innovative design finally adds to modular the capability to patch more than one signal at a time and unleash the full potential of polyphonic patching between modules. Polytips uses the industry standard USB Type C connector although it is not a USB cable (and USB cables do not work with Polytip). Internally multiple lines of shielded analogue audio lines pass from end to end with excellent sound quality.

Notes: Polytip is Tiptop Audio's new type of modular synthesiser patch cable that can pass multiple audio channels using minimal panel space. This innovative design finally adds to modular the capability to patch more than one signal at a time and unleash the full potential of polyphonic patching between modules. Polytips uses the industry standard USB Type C connector although it is not a USB cable (and USB cables do not work with Polytip). Internally multiple lines of shielded analogue audio lines pass from end to end with excellent sound quality.

Notes: Polytip is Tiptop Audio's new type of modular synthesiser patch cable that can pass multiple audio channels using minimal panel space. This innovative design finally adds to modular the capability to patch more than one signal at a time and unleash the full potential of polyphonic patching between modules. Polytips uses the industry standard USB Type C connector although it is not a USB cable (and USB cables do not work with Polytip). Internally multiple lines of shielded analogue audio lines pass from end to end with excellent sound quality.

Notes: Polytip is Tiptop Audio's new type of modular synthesiser patch cable that can pass multiple audio channels using minimal panel space. This innovative design finally adds to modular the capability to patch more than one signal at a time and unleash the full potential of polyphonic patching between modules. Polytips uses the industry standard USB Type C connector although it is not a USB cable (and USB cables do not work with Polytip). Internally multiple lines of shielded analogue audio lines pass from end to end with excellent sound quality.

Notes: ***B-STOCK: Box opened, product in perfect working order***


This AC Power Adapter comes with a locking DC extension cable. The connector of the DC extension cable screws down to the DC jack, preventing noise interference when the cable is bumped.

There are two voltage options:
12V: used with original 5A Power Supply and newer Five Amp Power.
19V: used with Deluxe Power, Super Power, Case Power Mini and Case Power.
Note: If you are replacing a power brick on a Synthrotek power supply, use the same voltage as was originally sent (unless the brick is 15V, then change to it to 19V).

AC input: 100-240V, 1.6A, 50-60Hz

DC output:
12V at 5A
19V at 4.74A

Center positive 2.1mm pin

Comes with a 3-prong power cable, which will work in the US and some other countries. If you are in Europe, etc. you can get a separate volex connector that will work in your country. We don't carry international connecting cables, but you can find them easily on the web.

Notes: The 1-row QUICKSWAP CASE for AE modular is the high-end case for AE modular. It is based on a sturdy metal chassis with a beautiful matte black powder coating and - the key feature of this case - allows to plug in AE modules without any screws! The design makes sure that the modules sit really firm in the case and the bus connection is established automatically by the integrated bus board, so need for the separate bus cable known from the standard AE cases. This means, rearranging your modular system can't be easier!

This case is developed by Kyaa, a great 3rd party AE module developer; tangible waves is producing the case. We are happy about this great cooperation and this marvellous addition to our product range!

With a connector kit, another QUICKSWAP CASE of same width can be attached at certain angles, depending on the connector - and the power supply is linked between the cases also via the connector.

Other utilities, like a handle for carrying a folded case, are coming soon.


Please note: This rack does not include the Master or Power module. To connect the case to power you have the following options:
Install the Master Module
Install the Power Module
Connect to another, already powered QUICKSWAP CASE
Connect to another AE case via the RACKLINK module kit

Notes: The 1-row QUICKSWAP CASE for AE modular is the high-end case for AE modular. It is based on a sturdy metal chassis with a beautiful matte black powder coating and - the key feature of this case - allows to plug in AE modules without any screws! The design makes sure that the modules sit really firm in the case and the bus connection is established automatically by the integrated bus board, so need for the separate bus cable known from the standard AE cases. This means, rearranging your modular system can't be easier!

This case is developed by Kyaa, a great 3rd party AE module developer; tangible waves is producing the case. We are happy about this great cooperation and this marvellous addition to our product range!

With a connector kit, another QUICKSWAP CASE of same width can be attached at certain angles, depending on the connector - and the power supply is linked between the cases also via the connector.

Other utilities, like a handle for carrying a folded case, are coming soon.

Please note: This rack does not include the Master or Power module.
To connect the case to power you have the following options:
install the Master Module
install the Power Module
connect to another, already powered QUICKSWAP CASE
connect to another AE case via the RACKLINK module kit

Notes: The uBASE-QS 2 module is the carrier (or BASE) for four micro modules and explicitly designed for use in the QUICKSWAP CASEs. This carrier module can be plugged into the QS case as any other module; then, the uModules can be plugged in and removed itself into it, even with the AE system running, so you can reconfigure or add needed functions in form of micro modules "on the fly".

A number of sockets provide access to the bus signals, like CV, gate, cotroller, MIDI start/stop/clock.

Included is a small "key" to lift also modules without knobs in an easy way.

Notes: The uCASE is designed to hold AE micro modules of 1/3 size. It is available in the same widths like the other AE cases (12, 16, 20 units). It contains sockets for uModules over the whole width, so no need for extra carriers for the uModules. The uModules can be plugged in and removed easily, even with the AE system running, so you can reconfigure or add needed functions in form of micro modules "on the fly".

The bus connection to the parent case is made with a short ribbon cable, so the uCASE gets it's power supply plus other bus lines from there.

The functionality is basically the same as the uBASE module; here, to groups of four uModules the bus lines lie CV, GATE, MIDI clock etc. can be assigned individually (not used by the currently available uModules, but will become relevant for future uModules).

Included is a small "key" to lift also modules without knobs in an easy way.

Notes: The 3-Tier Mantis Studio Brackets pair lets you connect three Mantis together in a robust and elegant solution. This setup is fixed and is recommended mainly for studio use. The brackets are cut precisely by laser from a sturdy metal and then coated twice for a nice smooth finish that matches the Mantis light gray colour. They come with twenty screws and special washers that help hold the screw in place during assembly and keep a tiny gap between the brackets and the Mantis. Installation is fairly simple and takes about 30 minutes to complete.

Notes: The 1-row QUICKSWAP CASE for AE Modular is the high-end case for AE Modular. It is based on a sturdy metal chassis with a beautiful matte black powder coating and - allows to plug in AE modules without any screws, which is a key feature of this case! The design makes sure that the modules sit firmly inside the case and the bus connection is established automatically by the integrated bus board, so need for the separate bus cable known from the standard AE cases. Rearranging your modular system can't be easier!

This case is developed by Kyaa, a 3rd party AE module developer; Tangible Waves is producing the case.

With a connector kit, another QUICKSWAP CASE of same width can be attached at certain angles, depending on the connector - and the power supply is linked between the cases, also via the connector.

Other utilities, like a handle for carrying a folded case, are coming soon.

Please note: This rack does not include the Master or Power module.

To connect the case to power you have the following options:

Install the Master Module
Install the Power Module
Connect to another, already powered QUICKSWAP CASE
Connect to another AE case via the RACKLINK module kit

*** Please note: the modules are not included, they are shown for demonstration purposes only. ***

Notes: Especially when adding new modules to your AE modular system, it's recommended to check the status of the supply voltage. When too many modules are supplied by one MASTER or POWER module, the supply voltage can drop too low below 5 volts; this can cause some issues like oscillators losing the tracking/calibration, digital modules can show some malfunction and so on.

To make the voltage check convenient, you can use the VOLTAGE TESTER: You can plug it either into a free socket on the bus cable, or via the included adapter, to the extension header at the front/rear side of the case. Then, 5 LEDs show the supply voltage, either green for "ok" (supply voltage is in the range of 4.9 - 5.1 volts), or other colours for too high or too low voltage in steps of 0.1 volts.

Notes: 2mm thick aluminium panel, in bath-anodized finish, with high-quality light-grey printing.

Notes: 104hp wide with two 3U rows and a 1U row.
Powder coated aluminum construction
VESA mount compatible (100mm x 100mm)
Plastic handle for easy mobility
Metal feet can be installed to support multiple angles of jamming.
Secure latching lid with enough depth to keep your patches patched

Expandable

Lid - when you're ready to add more space, the lid can be expanded to be another 104hp x 7U. You can add another set of rails, power supply and power jack and double your available space. (Kit available)
Metal feet - The metal feet can have a pair of rails and rack mounted power added to support another 3U row of 104hp. (Kit available in future)

Connectivity

Audio jacks - set of four jacks for stereo in and stereo out.
MIDI jacks - DIN jacks to support IN, OUT, and THRU MIDI.
USB power - can be used for a lamp to light your case or to charge your phone while recording your set.

Dimensions
557mm x 334mm x 169mm
74mm depth for 1U and bottom 3U row
52mm depth for middle 3U row

Power
+12V - 3A (with plenty of allowance for in-rush current)
-12V - 3A
+5V - 3A (shared with USB power)
36 shrouded power headers

In The Box
Main case
Lid
Metal feet
Power adapter 20V at 6A

Notes: Save space in your rack with stackable cables.

These are the newer shorter stackable Eurorack Patch Cables. Patching is more stable and makes it easier to get a lid on that performance case.

Each end of the cable has a male and female jack. They come in sets of 5 cables.

Available in 6in (15cm), 12in (30cm), 18in (45cm), 24in (60cm).

Notes: Save space in your rack with stackable cables.

These are the newer shorter stackable Eurorack Patch Cables. Patching is more stable and makes it easier to get a lid on that performance case.

Each end of the cable has a male and female jack. They come in sets of 5 cables.

Available in 6in (15cm), 12in (30cm), 18in (45cm), 24in (60cm).

Notes: After Later Audio Braided Patch Cables for Eurorack in Gold and Black. One size per pack of five cables. Packs come in 15, 30, 45, and 60 centimeters, or 6, 12, 18, and 24 inches.

Notes: These rack screws for Eurorack can be screwed by hand for quick changes, or use a standard Phillips head screw driver.

Each Standard Size M3 X 8mm stainless steel screw comes with a black nylon washer in a black tin.

Notes: After Later Audio Braided Patch Cables for Eurorack in Gold and Black. One size per pack of five cables. Packs come in 15, 30, 45, and 60 centimeters, or 6, 12, 18, and 24 inches.

Notes: After Later Audio Braided Patch Cables for Eurorack in Gold and Black. One size per pack of five cables. Packs come in 15, 30, 45, and 60 centimeters, or 6, 12, 18, and 24 inches.

Notes: Save space in your rack with stackable cables.

These are the newer shorter stackable Eurorack Patch Cables. Patching is more stable and makes it easier to get a lid on that performance case.

Each end of the cable has a male and female jack. They come in sets of 5 cables.

Available in 6in (15cm), 12in (30cm), 18in (45cm), 24in (60cm).

Notes: Save space in your rack with stackable cables.

These are the newer shorter stackable Eurorack Patch Cables. Patching is more stable and makes it easier to get a lid on that performance case.

One end of the cable has a male and female jack, the other end as just a male connector. They come in sets of 5 cables.

Available in 6in (15cm), 12in (30cm), 18in (45cm), and 24in (60cm).

Notes: Save space in your rack with stackable cables.

These are the newer shorter stackable Eurorack Patch Cables. Patching is more stable and makes it easier to get a lid on that performance case.

One end of the cable has a male and female jack, the other end as just a male connector. They come in sets of 5 cables.

Available in 6in (15cm), 12in (30cm), 18in (45cm), and 24in (60cm).

Notes: These are skinny (sometimes called noodle) patch cables for Eurorack. This is a pack of five cables, size 6", pink in colour.

Notes: This is a pack of five, 12" skinny patch cable for Eurorack. Colour is green.

Notes: These are 6" (15cm) right angle patch cables for Eurorack. Colour is pink, pack of 5 cables.

Notes: These are right angle patch cables for Eurorack. Colour is blue, pack of 5 cables.

Notes: These rack screws for Eurorack can be screwed by hand for quick changes, or use a standard Phillips head screw driver.

Each Special Size M2.5 X 8mm stainless steel screw comes with a black nylon washer in a tin.

Notes: Save space in your rack with stackable cables.

These are the newer shorter stackable Eurorack Patch Cables. Patching is more stable and makes it easier to get a lid on that performance case.

One end of the cable has a male and female jack, the other end as just a male connector. They come in sets of 5 cables.

Available in 6in (15cm), 12in (30cm), 18in (45cm), and 24in (60cm).

Notes: Save space in your rack with stackable cables.

These are the newer shorter stackable Eurorack Patch Cables. Patching is more stable and makes it easier to get a lid on that performance case.

Each end of the cable has a male and female jack. They come in sets of 5 cables.

Available in 6in (15cm), 12in (30cm), 18in (45cm), 24in (60cm).

Notes: 2mm thick aluminium panel, in bath-anodized finish, with high-quality light-grey printing.

Notes: Optional accessory replacement panel.

Black anodised alu + heavy duty screen printing.

Notes: Nine zip cable ties in 3 different colours. Light Grey, Dark Grey, and Red. Each pack contains 3 cable ties of each colour.

Notes: LOCI Crate 30 is a 30hp case for small Eurorack configurations. Supplied with strong 3D printed LOCI Rails (inspired by vector rails) and stainless steel threaded strips. At just L49.99 RRP inc VAT it's an incredibly affordable route into the modular synth world.

Great for small Eurorack Modular setups.
Assembled in seconds.
Super strong.
Precision laser cut from ethically sourced and renewable 6mm Oak veneer.
Beautifully detailed with laser etched logo.
Non-slip pads.

Notes: 2mm thick aluminium panel, in bath-anodized finish, with high-quality light-grey printing.