Suchergebnisse: Dance Music

Notes: This is a digital effects pedal in a compact format, including reverse delay - pitch shifter - delay and modulated reverb.

Effects engine is 12 bit and includes analogue filtering before and after digital conversion, based on vintage eighties units' topologies, but it allows for all the effects to be simultaneously available.

Despite its complexity, operation is simple and intuitive, all functions are directly controlled by the corresponding knob.

Pots controls:

1-Blend controls mix of effects over final output signal
2-Octave blend mix a pitched signal to the input of the reverb
3-Octave -1 +1 controls tuning of pitch component
4-Repeat controls feedback of delay component 5-Balance controls mixture from reverb and
delay.
6-Sample rate controls the frequency operation for the whole pedal, modifying delay time
and reverb decay.
7-Reverse blends the reverse component with the direct signal.

Indicators:

Signal: indicates clipping, the input path has compression and limiting so it gives an idea of how hard you are driving the pedal.

Tap: blinks at the rate of the delay, depending on tap and sample rate.

Tap/freeze: turns red while tapping time, blue indicates reverb freeze.

Bypass: global effect on/off

Footswitches:

1-Tap/ freeze works as a tap tempo for the delay and reverse delay, and freeze/infinite for reverb, selected by the associated toggle switch. Max delay time is around 6 seconds, depending on sample rate setting.

2-Bypass: buffered bypass for the whole pedal.

Power consumption: 150 milliamps.

Notes: One of the hardest in the game. Dedicated kick drum synth from analogue experts Vermona. Shape your own sounds from scratch. Killer.

Supplier's notes:
The Kick Lancet generator is a handy analogue percussion synthesizer with priority to kick-drum sounds.

The heart of the Kick Lancet's sound structure is an analogue oscillator that produces sine and square waves, which can blend seamlessly from one to the other. 2 independent envelope generators with a decay/release phase can modulate the oscillator's frequency and the VCA. Additionally the VCO pitch can be modulated by the fast LFO (3Hz to 3 kHz, triangle). Noise and a pulse signal can be added in the mixer section. Vermona have a balls-controller for making it really big.

The Kick Lancet can be triggered by MIDI but beside that there are 3 different trigger inputs. A gate trigger, which impulse can trigger the Kick Lancet in normal way with additional accent or completely dynamical depending on the incoming voltage, a simply short current trigger (i.e. momentary foot switch) and an audio input, which offers the possibility to trigger the Kick Lancet by an audio signal statically or dynamically. Drum pads can also be connected here.

Notes: Instantly create matching harmonies to what you play.

The EHX Intelligent Harmony Machine instantly creates matching harmonies to what you play. It's like having one - or even two - guitarists jamming with you at the same time and always in perfect sync. The Intelligent Harmony Machine opens a door to the music of great multi-lead guitar bands and multi-part harmonized solos. Plus, its ability to apply harmonies ranging from simple to sophisticated will totally transform what you play. Of course, it also boasts EHX's renowned impeccable tracking and genuine musical tone.

Select your key and the Intelligent Harmony Machines will generate single note, diatonic harmonies* with a huge range of choices that includes both two- and three-part harmonies. Here are your choices:

1: 6th Down
2: Perfect 4th Down
3: 3rd Down
4: 3rd Up
5: Perfect 4th Up
6: Perfect 5th Up
7: 6th Up
8: 7th Up
9: 3rd Up + 5th Up
10: 3rd Up + 7th Up
11: Perfect 5th Up + Octave Up

These sound so cool that EHX have included them as extra options for the multi-harmony parts (selections 9, 10 and 11) to give you even more choices:

9 optional: 4th Down + 3rd Up
10 optional: 3rd Up + 6th Up
11 optional: Octave Down + 5th Up
9 optional: 6th Down + 4th Down
10 optional: 3rd Down + 3rd Up
11 optional: Octave Down + 4th Down
The Intelligent Harmony Machine also performs perfect polyphonic pitch shifts so the pitch shifts you dial up are applied to chords as well as single notes. We've even included a Major/Minor switch so you can select whether 2nds and 3rds will be major or minor. Here are the interval selections that are available:

1: Doubler
2: Perfect 4th Down
3: 3rd Down (minor on major)
4: 3rd Up (minor or major)
5: Perfect 4th Up
6: Perfect 5th Up
7: 2nd Down (minor or major)
8: 2nd Up (minor or major)
9: Octave Down
10: Octave Up
11: Perfect 5th Up + Octave Up

The Intelligent Harmony Machine's Moment Mode lets you instantly change pitch by simply depressing the pedal's footswitch. The pitch shift is engaged as long as you hold down the F/S. There's also an option so you can apply a user-set sweep time between dry and effect. Choose instant pitch changes or control the time it takes for the Intelligent Harmony Machine to sweep up and down between the set interval and the dry signal!

EHX Founder, Mike Matthews said: "We designed the Intelligent Harmony Machine for the player who craves maximum power, but in a minimal footprint. You'll dig its sweet, musical tone and spotless tracking!"

*Diatonic harmony means notes within a specific key that relate to each other.

Compact harmony generating, pitch-shifting powerhouse
Impeccable tracking and superb musical tone
Two distinct modes: Intelligent Harmony and Polyphonic.
Intelligent Harmony Mode generates diatonic harmonies in a set key based on the single notes you play. Key Selector and #/- switches provide access to all 12 keys.
In Polyphonic Override Mode you can play single notes and chords. The IHM's 11-position Interval Selector switch lets you select the harmony.
In Momentary Mode the effect is only active when the footswitch is depressed. Choose from instant shifts or set the time it takes the signal to sweep up and down.
Mix control sets the mix between your dry and shifted signals. Dry output adds signal routing and control options and flexibility
Comes equipped with an EHX 9 Volt power supply, can also run on 9 Volt battery

Specifications

Circuit: Digital
Bypass: Buffered Bypass
Audio: Mono
Power Supply: 9.6VDC-200mA power adapter included (optional 9V battery not included)
Dimensions (in): 4.5 x 2.75 x 2.1
Current Draw: 26mA
Year Released: 2021

Notes: The Bitmap is a bitcrusher with fractional bit reduction and sample rate modulation. The Bitmap 2 adds waveshaping, wavefolding, and a window comparator for extreme digital distortion. A drive control handles everything from single coil guitars to synthesizers, with +8 dBu maximum signal level and enough gain to sound like an overdriven mixer channel. Modulation and envelope control create dynamic, responsive distortion and digital artifacts.

The Bitmap 2 is tuned to provide maximum sustain without sputtering on staccato notes. Less extreme settings add layers of nonlinearities that interact in subtle ways, giving you the warmth and grit of 8- and 12-bit samplers. Sample rate reduction turns your guitar into 8-bit video game sounds or twists scales into inharmonic melodies. Sample rate modulation adds subtle motion or morphs your guitar into entirely new textures.

The Bitmap works with guitar, bass, synthesizers, drum machines, and other instruments or line level sources.

Size:3.05" x 4.75" x 2.5"
Input impedance:1 MO
Output impedance:< 1 kO
Bypass: analog buffered
Power: 9 VDC, center negative
Current: 250 mA

Notes: Second-gen Immerse offers true studio-quality stereo reverb in a compact pedal format. Eight high-quality algorithms with simple, user-friendly controls and top quality sound. Lush.

Supplier's Notes:
The Immerse Mk II raises the bar with eight rich stereo reverbs in one easy to use pedal. No user manual required. Experience studio-quality tone that can be used with instruments of all stripes.

Five controls:

Effect Select
Mix, from 100% dry to 100% wet
Reverb Depth
Tone / Echo Time / Hold Time (depending on effect)
Pre-Delay / Modulation / Blend (depending on effect)

Specifications:

Electrical

Input level: instrument / consumer line level
Input impedance: > 1 MO
Gain: unity
Frequency response: 20 Hz - 20 kHz
Total harmonic distortion: < 0.005%
Signal-to-noise ratio: > 107 dBA

Power

Input: 9-12 V DC, 80 mA
Connector: center-negative, 5.5 mm OD x 2.1 mm ID

Physical
Dimensions: 2.9" x 4.6" x 2.0" / 73 mm x 117 mm x 51 mm
Weight: 8.84 oz / 251 g

Notes: Designed with mixing and mastering in mind, Sennheiser's HD400 Pros are a competitively priced pair of open-backed headphones with excellent clarity and fatigueless sound.

Supplier's Notes:
It's all in the mix.

When working at home or in the studio, you need your mix to sound as it does when your listeners hear it. The HD 400 PRO reference headphones are your everyday tool to get the job done. Its open-back design provides a natural and accurate listening experience for fine tuning your signature sound. The core of the HD 400 PRO is the 120 ohm transducer developed by Sennheiser engineers, featuring a specialized polymer blend in its diaphragm. The drive magnet offers high power while its damping system manages ventilation - this combination yields deeper bass while mitigating the distortion that otherwise impacts clarity - a difference our professional users will appreciate. This makes the HD 400 PRO a precise monitoring tool which reveals your mix in every detail. Velour earpads and a distinct lightweight design provide the comfort you need during long sessions. The robust housing endures everyday wear and tear regardless of your application, whether editing, mixing or mastering. A single-sided and coiled cable gives you the freedom to operate. For convenience, a straight cable is also included in the delivery. In addition, open ear cups and angled transducers allow for a wide and transparent soundstage, recreating the optimal listening position found in high-end recording studios. Artifacts of a confined space are a thing of the past. The HD 400 PRO is a true reliable companion for those who put quality and precision above all else.

Specifications:

Acoustic principle dynamic, open
Ear coupling circumoral
Ear pad material Velour
Jack plug 3.5 mm jack plug with 6.3 mm adapter
Impedance: 120 O
Frequency response: 6 Hz to 38 kHz (-10 dB)
Sound pressure level: (SPL) 110 dB (1 kHz / 1 V RMS)
THD (total harmonic distortion): < 0.05 % (1 kHz / 90 dB SPL)
Weight (w/o cable): 240 g
Temperature
Operation:
Storage:
-15 -C to +55 -C (5 -F to 131 -F)
-55 -C to +70 -C (-67 -F to 158 -F)
Relative humidity = 90 %

Included in the box:

HD 400 PRO Studio Reference Headphone
3 m coiled cable with 3.5 mm jack plug
3.5 mm jack plug to 6.3 mm adapter
1.8 m straight cable
Quick Guide
Safety Guide

Notes: Echolution 3 is a multi-tap stereo modulation delay offering a myriad of sound design options including reverse, jump, pong, modulation tempo sync, variable low pass filter, flexible signal routing and comprehensive MIDI control. Delay times ranging from 100ms to 5 seconds can be dialed in using the Time knob or via Tap Tempo using the left footswitch. A second delay tap can be set to the same length or a fraction of the main delay time to create rhythmic echoes. The ¾ fraction creates a dotted eight note delay, while the Golden fraction uses the sacred geometry of the Golden Ratio (.382) as the multiplier for the second tap. The multi-tap settings can be even further enhanced by the stereo ping pong effect, which causes the different delay taps to switch sides on each repeat. Store up to 4 presets, unlock hidden features with the Universal Remote footswitch, and design yet unheard delay lines. Runs on standard 9VDC.

KNOB-BY-KNOB
Time: Sets the length of the delay line. Overrides tap tempo and vice versa. Select sub-divisions with the small push button. Can activate any two sub-divisions at once.

Mix: Sets the volume level of the delay signal.

Repeats: Sets the amount of regeneration in the delay line.

Mod: Select and set the modulation Speed, Depth, and Tone. Hold push button to sync Speed to tap tempo.

Preset Select: Push to toggle through presets, press and hold to select. To save a preset after making changes, press and hold. Presets can be toggled and selected using only footswitches (see manual).

Special FX: Reverse makes the delay line go backwards. Jump makes the delay line jump up one octave. Pong (activated with a push and hold) causes echoes to alternate between the left and right channels, meant to be used in stereo.

BREAK RULES AND BUILD WORLDS
Designed to offer a streamlined user experience and a massive feature set, Echolution 3 is a worldbuilder. In a compact package, "E3" offers multi-tap delay lines, with sound design FX options ranging from the subtly cinematic to the outlandishly dramatic. I/O options include stereo output, MIDI sync, and additional footswitch features. On board presets make revisiting your favorite corners of the Echolution 3 universe simple.

HOW TO DISAPPEAR COMPLETELY
Marvin has come across Echolutions in the Pigtronix universe beforeibut never quite like this. Echolution 3 is a supermassive black hole leading to a vivid dimension stuffed with color, light, and the unexplainable, causing the voyager to lose his or herself more deeply than they knew was possible. In this dimension, the imagination tends to expand: familiar figures appear in cloud formations, meteorites can be sat on like bean bag chairs, and ropes of light can be swung on like vines.

MODEL ECHOLUTION 3

MODEL NAME: Echolution 3
SKU: E3
FUNCTION: Stereo Multi-Tap Delay
CATEGORY 1: Delay
CATEGORY 2: Modulation
EXPRESSION: TRS Remote / MIDI
BYPASS: Buffered

ELECTRONICS
VOLTAGE: 9VDC
CURRENT DRAW: 100mA
INPUT IMPEDANCE: High
OUTPUT IMPEDANCE: 1k

BODY
LENGTH (IN): 3.25
WIDTH (IN): 4.5
HEIGHT (IN): 2.2
WEIGHT (LBS): 1

Notes: Messor is a stereo compressor with lots of tricks up its sleeves. From gluing a mix together to squashing drums, sidechaining kicks and sculpting transients.

It's a VCA based feed-forward compressor with a high quality low noise signal path. The magic happens in the internal sidechain that shapes the gain reduction envelope.

There are the familiar controls of a compressor, attack, release, threshold, ratio and makeup gain, as well as a switchable high-pass / low-pass sidechain filter.

The ratio can go past limiting and into over-compression, which can completely reshape transients, a great tool for sound design.

Being modular, of course there are CV inputs for Attack, Release and the Filter cutoff.

The Gain CV controls the makeup gain, but also doubles as a Stereo VCA with the Gain knob off.

The gain reduction envelope is also available, for turning filters or other VCA's into compressors for example.

There's a bypass switch, and another Warm/Pure switch, that can bring in a bit of additional saturation and compression in the form of analog tube simulation circuitry.

Lastly there's the possibility to insert an external sidechain, for that classic kick sidechain compression.

Dimensions
8 HP
25 mm deep

Current Draw
45 mA +12V
26 mA -12V

Notes: The classic Pantheon pedal gets even better with this Deluxe version. Two independent overdrive circuits give you classic Blues Breaker-style tone plus modern boutique sounds.

Supplier's Notes:
The now legendary Wampler Pantheon provided a unique interpretation of the classic "Blues Breaker" style stomp box, by capturing all the tonal nuance of the original, but with added flexibility and style. In doing so, it found its way onto thousands of pedalboards across the world. Enter the new Pantheon Deluxe - a dual overdrive pedal that takes this evolution several steps further by offering a flexible design with two completely independent Pantheon circuits, one voiced as a classic blues breaker and one with a more modern boutique sound. This palace of tone delivers a staggering 200 combinations of gain settings, featuring dual Inputs and Outputs, and for the first time ever, Wampler have added MIDI channel switching to one of their gain pedals.

The Pantheon Deluxe lets you dial in two channels of organic creamy gain, gritty overdrive, or heavy distortion while retaining Wampler's famous ease of use and flexibility. Channel 1 delivers a classic Blues Breaker tone, Channel 2 is a recreation of the original Pantheon, a similar circuit to the Blues Breaker but with a modern boutique feel. Independent side mounted Voicing and Gain Level switches allow you to further shape your tone to perfection.

DOUBLE UP

The Pantheon Deluxe lets you dial in two channels of organic creamy gain, gritty overdrive, or heavy distortion while retaining Wampler's famous ease of use and flexibility. Channel 1 delivers a classic Blues Breaker tone, Channel 2 is a recreation of the original Pantheon, a similar circuit to the Blues Breaker but with a modern boutique feel.

ALWAYS THE RIGHT FIT

Each Channel of the Pantheon Deluxe Dual Overdrive feature independent Gain, Level, Treble, and Bass controls to enhance the shaping of your tone. The Baxandall-style active Bass control is neutral at noon but boasts an extremely powerful sweep as you move through the range. A single global Presence control simultaneously alters each channel to add just the right amount of top-end chime to suit different guitars and amplifiers - perfect for when playing live or when in the studio.

MAXIMUM CONNECTIVITY

With the addition of MIDI In and Out, you can now also switch the analog channels of each circuit on and off with a MIDI switcher - saving you valuable hardware loops on your loop switcher. With dual analog inputs and outputs, you can split both channels in a loop switcher, insert pedals between each side, or run in stereo.

BUILT FOR FOREVER

Brian Wampler's attention to detail and commitment to bringing you the best-sounding & most usable Effects Boxes on the market is nothing new. Those qualities are on full display within the Pantheon Overdrive. We're all tone-freaks, and we're always trying new things, but we hope this pedal finds its forever home on your pedalboard, so we built it to last that long.

TECHNICAL DETAILS

Built in the U.S.A
Dual Independent drive channels using Brian Wampler's classic Pantheon circuits; Channel 1 Classic Blues Breaker voicing, Channel 2 Modern Boutique voicing.
Independent Volume, Gain, Treble and Bass controls for both channels, global Presence control, front mounted Channel Order Switch, side mounted independent Gain Level and Voicing switches, MIDI In and Out (3.5mm TRS) and 2 sets of input and output jacks.
Top-mounted jacks make pedalboard placement effortless
Power draw: 55mA
9-18V power jack: DC supply only, do not exceed 18V DC, battery Included.
Includes Wampler's limited 5-year warranty
5" x 4.5" x 1.5" (88.9mm x 114.3mm x 38.1mm) - height excludes knobs and switches

Notes: ***B-STOCK: Box damaged, product in perfect working order***


Effects masters Eventide serve up a lush bucket brigade chorus inspired by the analogue classics of the 70s and 80s. Three chorus voices plus MicroPitch detuning for stereo width and complexity.

Supplier's Notes:
Short Description: Stereo Bucket Brigade-style Tri-Chorus with Psychedelic Swirl; Eventide's lushest chorus ever! Product copy: Deep Modulation & Dreamy Textures

Inspired by the classic Tri-choruses and stompbox choruses of the 1970s and early 1980s, the TriceraChorus pedal pairs rich Bucket Brigade-style chorusing with Eventide's legendary MicroPitch detuning for a lushness that rivals the jungles of the late Cretaceous Period. TriceraChorus features three chorus voices and three unique chorus effects which can be used to create a wide stereo spread with pulsing waves of modulation. The innovative "Swirl" footswitch adds psychedelic flanging, phasing and Univibe-style tones. It has never been easier to dial in syrupy smooth deep modulation on guitar, bass, synths, strings, vocals and more.

Deep Modulation & Dreamy Textures

TriceraChorus has three chorus voices: Left, Center, and Right, which can be detuned to add even more depth. A three-phase LFO modulates the delay times for these voices, producing a dazzling movement across the stereo field. The combination of the three modulated delays creates a huge wash of chorus reminiscent of that big, dreamy '80s sound.

A Trifecta of Tone

Like the mighty three-horned Dino, TriceraChorus is a powerhouse of chorus offering three effect types complemented by detuning and Swirl. For a quintessential vintage chorus sound, set TriceraChorus to "Chorus" mode. If you need something with more complexity and movement, "Chorale" produces lush, heavenly choruses inspired by classic rackmount Tri-chorus units. For a more warbly, pulsing effect, try "Vibrato." Add detune for subtle pitch shifting sweetness. Engage the "Swirl" footswitch to get lost in a whirlpool of kaleidoscopic sound.

Notes: The Germanium Filter is Death By Audio's love letter to sticking a pencil in your speaker.

Start with a console-style drive circuit, add in a dash of obsolete germanium transistors and finish it off with a super intense DBA-style filter - BLAMO! You've got a sound heavy enough to crush on and sharp enough to slice a tomato.

The Filter control is extremely unconventional - it'll take you from bottomless, sub-woofered out lows to super searing and brittle highs, with a universe of tone in between. The Germanium Filter will help you find the sweet spot for your instrument in any situation - at a show, in the studio, or even stranded on the side of the highway after your tour van catches fire - hey, it happens!

The Gain knob starts with a dirty boost that then spans through saturated drive, spitting distortion, and a blistering fuzz tone. Get ready for your sound to be cranked up to infinity-and-a-half and captured on tape by the most incredible recording engineer you've ever heard - only there's no engineer and no studio. Just you, your guitar, your amp and the Germanium Filter.

Controls

Filter: Controls the frequency response of the pedal, featuring huge low end, scooped mids, and sharp, piercing highs.

Gain: Sweeps from mild overdrive to blasted-out fuzz. Very interactive with your guitar's volume control.

Volume (internal): Controls the overall output level of the pedal.

Specifications

Dimensions: 5" x 2.5" x 2.25" (including hardware).

Weight: 10.6 oz

Power: 9V (runs on standard 2.1mm negative center 9V adapter or included 9V battery).

Current Draw: 5 mA.

Notes: Welcome to the DROID X7 expander. The X7 gives you USB and MIDI connectivity for your master and also four gate outputs with modular levels.

You can process incoming and generate outgoing MIDI streams, both via classical DIN cables and via USB. Both the in and the out direction support polyphony with eight or even more voices in parallel.

For size reasons the X7 uses 3.5 mm TRS jacks for MIDI instead of the classical DIN jacks. But it comes with two DIN to TRS adapters, so you are free to use either form factor.

As a bonus feature, the X7 provides super fast loading of DROID patches via USB - without any need for putting the SD card in and out anymore.

Here are some examples of what you can do with the X7:

Attach an external keyboard to your modular.
Use an external hardware sequencer for playing melodies and beats in your modular.
Use an external MIDI controller to influence your DROID patch.
Do the same with a MIDI controller app on your tablet or phone (via USB).
Use your modular for playing polyphonic music and beats on your hardware synths or software synth plugins in your DAW, tablet or phone.
Connect two DROIDs (both with X7) and exchange real time CVs and triggers.
Use the four additional gate outputs on the X7 for sending clocks, gates and triggers and free your valuable CV outputs for other things.
Access the SD card in your master just like a USB stick for direct access to it via your PC, Mac, phone or tablet.
Alternatively load new patches to your master via MIDI sysex from your PC - and get your new patch ideas up and running in less than a second.

Dimensions
4 HP
23 mm deep

Current Draw
94 mA +12V
0 mA -12V
0 mA 5V

Notes: The Collective is a brand new fuzz pedal designed by Hungry Robot. The Collective is an over-designed, complex fuzz pedal, a true desert island fuzz designed to please the most ardent fuzz connoisseur. The Collective covers a lot of ground with plenty of external controls as well as over a DOZEN internal parameters to narrow down that perfect fuzz tone. The Collective is a pedal that requires and encourages exploration. The Collective has three fuzz circuits in one box. On top of that there is a 2-band State Variable Filter and a chatotic feedback loop.

Starting at the top of the pedal, the "Conventional" knob is a traditional sounding fuzz. This is meant to balance out the more chaotic fuzz tones and provides a bread-and-butter sound when you need it. The "Low Spectrum" and "High Spectrum" knobs are part of an active State-Variable Filter, similar to the one found on The Lumen. The "Synthetic" knob is a logic based CMOS fuzz that can be described using the words, velcro-ey, synth-ey, gate-ey, and glitch-ey. The "Pristine" knob allows you to blend in your clean signal when you need a bit of pureness to balance out the crazier sounds. On the left is the "Overload" knob. This controls the amount of signal let back through an internal feedback loop. The output of the fuzz is fed back into the input causing self-oscillation and some gnarly textures. Underneath the knob is a dedicated momentary footswitch to activate the feedback loop or you can latch the feedback loop ON by flipping the toggle switch up. On the right is the "Submerge" knob. This is a monophonic sub-octave fuzz. Similar to the "Synthetic" fuzz, this is also CMOS-based, so similar gated, unstable tones. The "Submerge" also has a dedicated momentary footswitch to add in the sub-octave with its own toggle switch that can latch the sub-octave.

Controls

Conventional: Adjusts the volume of the Conventional Fuzz
Synthetic: Adjusts the volume of the Synthetic Fuzz
Pristine: Adjusts the volume of the clean signal.
Overload: Controls how much feedback is looped back into front end when Overload is active.
Latching Toggle Next to Overload: Latches the Overload effect ON when up. When down, the effect is bypassed.
Footswitch Below Overload: Momentary control of Overload effect. Does the opposite of what the Toggle Mode is set to.
Submerge: Amount of Submerge, monophonic sub-octave is sent to the output.
Latching Toggle to Submerge: Latches the Submerge effect ON when up. When down, the effect is bypassed.
Footswitch Below Submerge: Momentary control of Submerge effect. Does the opposite of what the Toggle Mode is set to.
Middle Footswitch: Master Bypass

Technical specifications:

Current Draw: 97 mA
Dimensions: 5.7" x 4.7"
Powering: 9V DC - Negative Center - 2.1mm Barrel

Notes: Dynamic hold effects are the aim with this creative reverb pedal. Three reverb modes (tape, comb filtering and resonant bandpass filtering) can be frozen and triggered to create infinite sustaining textures.

Supplier's Notes:
Dynamics. It's the shifting ebb and flow of the tide. It's the ups and downs of life. It's witnessing night turn into day, as the sun attacks and sustains through the nightly veil, making the darkness release its gloomy grasp and decay. It's where you'll find the Old Blood Noise Endeavors Sunlight Dynamic Freeze Reverb. An envelope triggered multi-mode reverb with the ability to dynamically freeze and sustain your notes forever, seeing you create truly mesmerising sunlit soundscapes.

Building on what made OBNE's top-selling Dark Star such a stellar early-chain pad reverb, Sunlight twists it into the other dimension as a reverb pedal centred around the idea of a dynamic hold. When you play, your new notes are let through and old notes are allowed to fade away, but when you stop playing, old notes have the chance to repeat forever.

A dead simple to use interface of just two knobs controls the nature of this relationship. In addition, there are three sonic modes that highlight modulation, comb filtering and resonant bandpass filtering, each of which takes their own spin on the reverb signal. The Mix, Input and Decay controls work exactly the same across each mode, as they help control the dynamics.

Mix sets the loudness of the reverb, which goes from all dry to all wet and anywhere in between, allowing you to create everything from subtle reverberations to deep ambient textures. Now, the interplay between Input and Decay is where the real Sunlight magic starts to happen. Decay determines how long the reverb trails will sustain, which will go from quick ephemeral evaporations to infinite reverb pads. On the other hand, Input controls how much of your signal is allowed into and fed back within the reverb. At zero, no new input will be added to your reverb, but as you increase it, more signal is let through, letting you create gently evolving ambient textures or drastically changing synth-like pads.

Rate and Depth are mode-dependent controls. TAPE Mode is a modulated reverb inspired by the unexpected shifts of a tape machine wobbling. Here, Rate and Depth set the speed and intensity of the lopsided vibrato applied to the reverb signal. COMB Mode is a combination of reverb and delay. Four delay lines are placed after the reverb, and the emphasis on stacked short delays creates comb filters like a fixed flanger. Rate sets the time of all four delays, and Depth sets the feedback (or resonance) of the delay section. PASS Mode is a bandpass filter applied between two reverb paths, where a random sample-hold function sets the cutoff frequency of the bandpass. Rate sets the timing of the sample-hold and Depth sets the range of possible cutoff frequencies. If Rate is set to 0, Depth sets a fixed cutoff frequency.

But the sound shaping adventure doesn't end here. Sunlight also contains a bunch of expressive capabilities performed through the on-board ALT switch, which can be set to change control settings either momentarily or latching. It can be assigned to the Rate, Depth, Decay or Input controls or any combination of the four. You can also control them externally via an external expression pedal, the OBNE Expression Slider or even the OBNE Expression Ramper, which will open up even more creative possibilities.

Dimensions:

Product Height (cm): 5.800
Product Width (cm): 6.600
Product Depth (cm): 12.000
Product Weight (kg): 0.300

Box Height (cm): 7.800
Box Width (cm): 8.200
Box Depth (cm): 14.400
Boxed Weight (kg): 0.453

Notes: A seriously versatile filter here, much more than meets the eye. Stereo, state-variable, multi-mode design gives you huge control over frequency response and stereo image.

Supplier's Notes:
Zagrzeb is a stereo multimode 4-pole (24dB/oct) state variable voltage-controlled filter (SV VCF). It offers five distinct frequency responses, three of which are available simultaneously. Spread control allows for animation of the stereo image by moving the left and right filter cutoff frequencies in opposite directions. Zagrzeb is designed to sound smooth and clean unless it is overdriven with a hot signal- however, it does not lack character! We believe it will be appreciated by fans of old Japanese synthesizers, but bear in mind that Zagrzeb is not a clone of any existing design. The four-pole state variable structure is a new development and offers unique sonic characteristics. While Zagrzeb is designed for filtering stereo signals (e.g. samples or stereo oscillators like Xaoc Devices Odessa), it can easily handle mono signals and is capable of creating a faux stereo pair thanks to a special phase shifting network at the input.

Dimensions:
8 HP

Current Draw:
70 mA +12V
60 mA -12V
0 mA 5V

Notes: The Buchla & Tiptop Audio 245T Sequential Voltage Source Model is a powerful and flexible voltage generator that authentically recreates the original Buchla 245, now in Eurorack format. Comprised of four rows of five steps, the 245T offers a wide range of sequencing abilities for your modular synth. With three available options for accessing the steps of the 245T, you can seamlessly integrate into almost any modular system to unlock the creative potential of the Sequential Voltage Source.

A wealth of connectivity, CV and parameter control options gives you complete control over your sequences. The 245T Sequential Voltage Source includes CV and manual control over the pulse length to ensure you are matching your material as well as a slew of output options to connect to other modules in your system. Both Pulse and Ref outputs allow you to take control over your sequencing, with Pulse outputting a trigger at each step and then controlled via the Pulse Length parameter and Ref offering a short envelope on the currently selected step.

Dimensions: 30 HP

Notes: Great value subwoofer designed to suit the bass requirements of modern music. Updated for 2022, the SUB8's bass response extends down to 35 Hz. Presented here in sleek matte black finish (also available in white).

Supplier's Notes:
Updated in 2022, this Sub8 gives you the speed and accuracy that only a sealed subwoofer can deliver. An 8" woofer driven by a 300W amp responds quickly to transients and keeps distortion to a minimum. Its compact size provides full-range sound without sacrificing floor space and a crossover filter and phase control allow for easy integration into any audio system. Sub8 provides worry-free longevity with its rigid MDF construction, solid rubber feet, metal grill, and durable vinyl finish. With matching aesthetics, sub8 is the perfect companion to any Kanto speaker or wherever else tight bass in a tight space is needed.

Experience the full impact of every song and soundtrack.

Sealed enclosure

Sealed subwoofers react to changes in audio more quickly than vented designs. Every bass note is reproduced accurately with little distortion allowing you to hear pure audio and not the subwoofers' influence on the sound.

Compact Design

At roughly 11" in each direction, sub8 fits under desks or in the smallest of apartments where traditional home theater subwoofers may dominate the space.

Drivers

8" Paper Cone Woofer

Audio

Class D Amplifier
300W Peak Power (150 Watts Total RMS)
Frequency Response: 35 Hz - 175 Hz

Inputs

RCA L/R Line Level

What's in the box

Power Cord
RCA Cable
Manual

Weights & measurements

Dimensions:
11" x 11" x 11.9" (28 x 28 x 30.3 cm)
Net Weight: 18.3 lb (8.3 kg)

Notes: Moonwalker is a versatile signal generator that performs as an envelope, lfo, and audio oscillator, with attack and decay time controls

Phase offset is continuously variable from 0 to 360° and inverts the waveform without changing it’s amplitude, and with or without changing it's polarity.

Unipolar mode preserves the output range by offsetting the starting voltage, so it always stays between 0 and +10v

Bipolar mode preserves the starting voltage by offsetting the output range, so it always starts at 0v. The output range will shift from +unipolar, through +bipolar, to -unipolar, through -bipolar back to +unipolar.

The reference waveform does not change phase, but the timing of the rate change between Attack and Decay shift with the phase offset, to ensure synchronous movement.

The phase offset output is half-normalled to the phase offset cv input and skews the waveform from triangle to saw or ramp without changing frequency (when attack = decay).

Dimensions
10 HP
39 mm deep

Current Draw
110 mA +12V
80 mA -12V
0 mA 5V

Notes: Consider this your clean slate. The Canvas Stereo is a Direct Box/LIne Isolator designed to remove any resistance between you and your audience by giving a pristine, sonic foundation to build your stereo masterpiece upon. From houses of worship to the dive bar downtown, Canvas Stereo is built to be the performance tool that goes wherever you are making your music.

Canvas Stereo is a Passive Line Isolator (LI) and Direct Injection (DI) device that converts your unbalanced signals into balanced signals for interfacing properly with your recording interface or mixer at front-of-house. If you're using an amp-in-a-box (DSP Guitar Rig), like our ACS1, keyboards, or any other instrument utilizing both left and right outputs, then the Canvas Stereo is your new bridge to the front-of-house. The Canvas Series DIs pack everything you need from a DI/LI into a standard pedal-sized enclosure designed to look great right on top of your board.

Direct Injection:
Use DI mode when connecting an unbalanced, high impedance source (Electric Guitar, Bass Guitar, etc). The signal will be reduced by -20dB (-35dB with pad engaged) and converted to a balanced signal via the transformer connected to the XLR output. Use the gain on your mixer or preamp to bring up to line level.

Line Isolator:
Use the LI when needing to connect your unbalanced, low impedance source (Amp + Cab Sim like the ACS1, keys, etc.). The signals will remain full volume and be converted to balanced signals via the transformer connected to the XLR output. Less preamp gain will be required in LI.

DI or LI?
When deciding between DI or LI, check with the manufacturer of your gear to find the output impedance of the device you are wanting to interface. For a general guide:High Impedance = anything above 1k = Use DILow Impedance = less than 1k = Use LI .

Troubleshooting:
This is a passive device, so you will not damage anything if connected improperly, but it could affect the signal level and frequency response if not connected properly. This is an easy thing to test since the LI/DI switch is built into Canvas. If you lose high-frequency information when using LI mode, then you should probably be in DI mode.

Notes: Most musicians use their feet as an extension of their playing, either pushing piano pedals, sustain pedals, guitar pedals.

However, feet have been underrated while using modulars. In the past ADDAC released a series of modules using sustain and expression pedals for triggering or controlling signals to help breaking the ice. While these are small and still useful for simple uses, ADDAC wanted to create something more specific this time.

This new solution features 5 footswitches and 5 inputs for external expression pedals with independent controls for each.

The aim was to save HP rack space and so created an external floor pedal with all the footswitches and controls, keeping the module HP to the minimum possible featuring only the 10 outputs and the connector to the external floor pedal.

There are many expression pedals in the market and although the most common one is the TRS pedal there are 2 other standards: RTS and TS.

All five ADDAC311 inputs expect TRS pedals, if you're looking into buying one choose a TRS pedal.

If you already have other pedals channel 4 features jumpers that can be switched in order to be used with a RTS pedal.

Channel 5 features a jumper that can be switched in order to be used with a TS pedal.

External expression pedals are required for their outputs to work.

External expression pedals are not included

Notes: Create without boundaries.

Record, produce, compose, mix, master, and perform-all from a single, intuitive application. Only Studio Oner 5 provides integrated tools that take you from initial inspiration to mastered production, from full-length album to setlist on stage. The standard for end-to-end production, Studio One is the DAW that does it all.

Drag-and-drop everything.

Studio One pioneered the often-imitated drag-and-drop workflow that continues to be a guiding principle in Presonus' design philosophy. Audioloops, virtual instruments, plug-in effects, and even presets can all be dragged into your session from Studio One's innovative Browser. Copy FX Chains from one channel to another simply by dragging-and-dropping. Convert MIDI to audio or audio to MIDI using drag-and-drop. Upload and download files to and from your PreSonus Sphere Workspaces by drag-and-drop. Ease of use is at the heart of Studio One, so your mind stays focused on your inspiration.

Perfect harmony.

The only DAW with Harmonic Editing for both audio and MIDI, Studio Oner 5 offers Chord Track, a songwriter's dream come true. Create, audition, and change chord progressions and even have older parts follow a newer, better chord structure, thanks to the inspiration Harmonic Editing can provide. With version 5.3, you can now drag chords from the Chord Track to an Instrument Track to begin composing right away. Chord notes can even be extracted directly from audio by detecting chords and then dragging the audio event to an Instrument Track.

Inspiring plug-ins.

With a complete suite of effects plug-ins, Studio Oner 5 supercharges your mixing. These plug-ins are so good we've made a few available for use in any DAW by popular demand. From State Space Modeled guitar amps to lush reverbs and polyrhythmic delays, Studio One has all the plug-ins you need to mix and produce. Studio One Professional's unique Pipeline XT plug-in lets you use boutique and vintage analogue signal processors as easily as software plug-ins. Studio One's powerful Splitter plug-in lets you run multiple plug-ins in parallel on a single channel.

Analogue mixing with digital ease.

The proprietary Mix Engine FX plug-ins provide State Space Models of classic analogue consoles that can process your mix across channels on any bus, collectively. This isn't a stereo bus plug-in, this is multi-source processing that re-creates true analogue circuit behaviour like console input-gain saturation, analogue noise, and crosstalk-all painstakingly modelled component by component from real-world hardware.

Produce without limits.

Forget laborious transposition, cutting, pasting, and moving when arranging. Audition new arrangement ideas on the fly with a simple click of your mouse. Use Scratch Pads to test arrangements. The flexible Arranger Track makes moving sections of Songs as easy as moving Parts. Powerful comping tools make assembling a perfect take simple, efficient, and fun. A robust suite of tools ranging from transient detection to multiple slicing and time-stretching features makes editing multitrack drums blazingly fast. And with groundbreaking Harmonic Editing-the most flexible implementation ever-no other program can approach the ease of arranging and songwriting that Studio One 5 delivers.

Edit audio and MIDI- fast.

Clip Gain Envelopes let you polish performances or remove glitches with adding a plug-in to your effects chain. Convert audio to MIDI and MIDI to audio with a simple drag-and-drop for blazing fast sample replacement. Replace drum sounds with samples simply by dragging the source track to an Impact XT track. The combined Arrow and Range Tools boost your audio editing efficiency by merging the most frequently used tools into one. Select, move, split, or duplicate Events; trim start and end points of Events; adjust fades; and change the overall Event level in one seamless action.

A sound as unique as you.

Inspiring virtual instruments and unique Multi Instruments let you combine instruments to create your own unique library of sounds. You'll create beats faster than ever with Impact XT, our comprehensive rhythm-production environment. Build your own sampled instrument with Sample One XT. From polyphonic analogue to monophonic subtractive synthesis, Studio One has the sounds that make you want to create. Presence XT can be expanded with Add-on packs like Deep Flight One and PreSonus Studio Grand. Aux Channels let you easily use your hardware synths, drum machines, and groove boxes as part of your productions, so dust off that TX81Z or Portastudio and put them back to work! However you create, Studio One has a tool that makes the job easy.

Notes: Field recorder meets interface in this clever offering from IK's iRig range. Essentially a 4-in/2-out audio and MIDI interface with built-in mics, the Quattro is portable, versatile and high quality.

Supplier's Notes:
Pro recording and performing, in the palm of your hand

iRig Pro Quattro I/O is a professional-quality 4 in / 2 out portable audio and MIDI interface packed with everything needed for field recording and content creation, for serious sound and flexibility - anywhere.

Small enough to fit in the palm of your hand, the iRig Pro Quattro I/O still packs in four high-quality, low-noise mic preamps; instrument, RCA and TRS inputs; plus XLR balanced, 3.5mm stereo and headphone outputs - and full MIDI I/O!

iRig Pro Quattro I/O works right out of the box with iPhone, iPad, Android, Mac and PC, but can also serve as a stand-alone mic preamp or line mixer, with a built-in limiter and direct monitoring so you're always guaranteed the perfect take.

Packed with a swiss-army-knife's worth of tools, iRig Pro Quattro I/O ensures you're ready for anything, anywhere.

As a mobile interface

Connected to a computer or mobile device, the iRig Pro Quattro I/O will work as a high-quality, multi-channel audio and MIDI interface with a full array of inputs and outputs so you'll always be prepared for any recording or need. Fully MFi-certified, no adaptors are required for iPhone or iPad for reliable field performance on any device.

As a broadcast / podcast interface

Enable STEREO mode and iRig Pro Quattro I/O mixes all sources down to stereo for streaming or recording. Monitoring is easy thanks to a dedicated headphone output with independent volume control and direct monitoring. Or use MONO mode for streaming to social media; Loopback lets you duet your favourite videos easily.

As a field recording interface

With an onboard microphone and optional stereo mic capsules, iRig Pro Quattro I/O turns your iPhone, iPad, Android device into a full-featured, professional field recorder.

As a stand-alone mixer

iRig Pro Quattro I/O also works as a preamp and mixer: just power it via battery, USB or DC IN and use the full set of inputs/outputs to capture and mix multiple sources to your DSLR camera with professional quality.

Always perfect recordings with the safety backup channels

In STEREO and MONO mode, inputs 3 and 4 can be used as safety channels: recording the same signal as input 1 and 2 but reduced by 12dB as a backup in case the sound source unexpectedly overloads the main channels.

Audio quality without compromise... wherever you are

Up to 24-bit, 96 kHz sample rate Ultra-low-noise mic preamps with full +48v phantom power Professional-quality, transparent A/D and D/A conversion Built-in limiter, for input 1-2, to protect against clipping Multitrack, stereo or mono internal mixdown.

Specifications

Microphone Input
Microphone Input: balanced female 3-pin, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
Microphone Input Level: from 6 mVpp to 1.4 Vpp
Microphone Input Impedance: 3.2 kOhms
Gain Range: 40 dB
Phantom Power: +48V i 4V
Frequency Response: 20 Hz - 20 kHz +/-1.5dB
Input Noise: -103 dB(A), -97 dB RMS

Instrument Input
Instrument Input: unbalanced, Hi-Z, TS 1/4" Jack, Tip: signal / Shield: ground
Instrument Input Level: from 30 mVpp to 6.9 Vpp
Instrument Input Impedance: 1 MOhms
Gain Range: 27 dB
Frequency Response: 20 Hz - 20 kHz +/-1.5dB
Input Noise: -103 dB(A), -97 dB RMS
Stereo Headphone Output
Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
Headphone Level Control numbered thumbwheel
Headphone Level Power 100mW into 50 Ohms

Stereo Headphone Output
Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
Headphone Level Power 100mW into 50 Ohms

MIDI Input/Output
Connector: 2x2.5mm TS Jack
Other Input/Output
DC barrel: 1x DC barrel. For power and device charging.
Device Connector: mini-DIN

Common
Conversion: 24-bit A/D, 24-bit D/A
Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz

Power:
- USB bus powered when used with a computer
- Battery powered (2xAA included) when used with an iOS device
- DC power supply (not included, iRig PSU 3A sold separately)*

Package includes
iRig Pro I/O universal Audio-MIDI interface
Lightning to Mini-DIN connection cable with charging features (60cm/23.62")
USB-A to Mini-DIN connection cable (60cm/23.62")
USB-C to Mini-DIN connection cable (60cm/23.62")
2.5mm TRS male to MIDI female adapter (10cm / 3.9")
2 x 1.5V AA Battery
Velcro strip

Dimensions
Size: 43mm/1.69" x 127mm/5" x 37mm/1.46"
Weight: 120g/4.23oz (batteries excluded)

Notes: The MiniMod Multi Burst Envelopes module generates variable length bursts of repeating envelopes that can change over time, with CV control of all functions.

The BURSTS control selects a "Burst Sequence" of between 1 and 40 individual envelopes. The envelope shape of a burst is chosen with the rotary switch, or it can be varied using an external CV, so that it is even possible to chose a different envelope shape for each individual burst in a sequence.

The width of the envelope (i.e. the attack and decay time) is varied with the P-WIDTH control and this can also be CV controlled as a sequence is progressing, so it is possible to vary the envelope speed of each individual envelope burst while a Burst Sequence is running.

The repeat time of individual bursts in a Burst Sequence is set with the LFO Rate control. The LFO rate can be varied with an external CV as a sequence is progressing, so the gap between envelopes can speed up or slow down over time. An external clock can also time the bursts in a burst sequence instead of, or in addition to the internal LFO. Bursts can also be manually incremented with the CLK push button.

The SLOPE control allows Bursts to start quietly and build in level to maximum, or they can start at full level and then reduce in level as the Burst Sequence progresses. In the centre position all Bursts are of equal level.

Specifications

Module Width: 12hp
Module Depth: 26mm (Including power lead)
Current Usage: 28mA Positive, 12mA Negative
Individual Envelope Length: 20msecs to 2.5 seconds
Internal clock rate: Off, 0.24Hz to 51Hz, or every 4.2 seconds to every 20msecs
Envelope waveshapes: Sine, LogDown, LogUp, ExpoDown, RampUp, Triangle, RampDown, Pulse
Repeats: 1 to 40
Slope: bipolar, sloping up from 4%->100%, and sloping down from 100%->4%

Notes: Atlas Compressor

The Atlas Compressor offers a comprehensive collection of compression circuits that perfectly capture the tone and feel of the industry's most sought-after compressors. Straight out of the box, Atlas delivers six different styles of compression, ranging from classic stompbox compressors like the now-discontinued Diamond Optical Compressor to high-end rack units such as the snappy 1176 compressor and the smooth and gentle LA2A optical compressor. Atlas also features advanced dual-band compression, which provides an independent set of controls for both the high and low frequencies. Each compression engine has onboard controls for Threshold, Ratio, Attack, Release, Output, Tone, and Blend, allowing for fine-tuned control over the compact One Series hardware.

A History Lesson in Compression

The Atlas is packed with so many different types of compression that it could serve as a tour guide through the history of compressor equipment. First stop: classic stompbox squashers such as the legendary the Dan Armstrong Orange Squeezer and the excellent (but discontinued) Diamond Compressor. Next stop: universal and ubiquitous studio rack gear like the smooth and gentle LA2A optical compressor and the ultra-responsive 1176 FET compressor. Finally, we're taking you to all-out nerd territory with Peak, RMS, VCA, and Dual compression, and an onboard Expander circuit... the Atlas has it all and does it well.

Optical Rack

The Optical Rack compressor engine is based on the legendary LA2A studio opto compressors from the early 60s. Optical compression controls its output level with light. Increasing the incoming audio level in the original units caused an electro luminescent panel to shine brighter. A photo resistor monitors that light panel and decreased the audio output level, as the panel got brighter. The result is a very smooth and gentle attack that imparts a full-bodied and natural sound on guitar, bass, or vocal. This compressor sounds great with clean strummed or arpeggiated guitar lines as well as acoustic guitars.

Studio 76
The Studio 76 compressor is based on the 1176 studio rack compressors of the late 60s and early 70s. This solid state FET compressor is known for its full body and super-fast attack. All of the attack times in 1176 compressors clock in at less than a millisecond. Studio 76 is a great compressor for fast and aggressive country pickin' (think Johnny Hiland), slap bass, slide guitar and much more.

Cubic Zirconia

The Cubic Zirconia was inspired by opto compressors that use an LED in place of the LA2A's electro luminescent panel. This technology is usually what you find inside effects pedals. Using an LED as an optical compressor's light source creates faster attack and release times, which generate artifacts that tend to make the compression sound a bit dirtier. This is a great sound for playing tight and funky riffs on the guitar.

Studio snap

A very aggressive and modern sounding compressor. It's based on hard-knee, VCA feed forward type compressor. It uses two compressors in parallel to handle both RMS level controls ("Root Mean Square" compression means that the compressor will react according to the "average loudness") AND the peaks. The combination of these two compression approaches gives STUDIO SNAP its character.

Dual band

The Atlas has two independent compressors that can be routed in a number of different ways. They can run in Series Mode (one running into another). They can also run in Parallel Mode and be mixed together with a Crossfade control. The Dual Band compressor runs in Band Split Mode, which is a version of parallel routing where one compressor controls only the higher frequencies (everything above 333Hz) and the other controls the lower frequencies (everything below 333Hz). With the Dual Band Compressor the high frequencies release faster than the lower frequencies, so as you sustain a chord the low frequencies remain compressed while the second compressor releases the high frequencies. The result is a beautiful blooming effect that accentuates high harmonics. This is a great compressor for slow ringing chords or lead lines with long sustained notes.

Includes 9v DC power supply (300mA / Negative Tip)
Includes 1/8" to 1/4" cable for Neuro Mobile App connection.
Power Consumption - 165mA
USB port - Connects to Mac or Windows PC for firmware updates and the forthcoming in-depth effects editing software.
Brushed anodized aluminum housing.
Dimensions: L: 4.5 in./11.4cm x W: 2.75 in./7cm x H: 2 in./5.1cm (including knobs)

Notes: Module A-121s is a dual multimode filter which can be used for stereo applications as well as for parallel or serial organized dual mono filters. The core is a 12dB multimode filter identical to the modules A-121-2 and A-121-3. The selection of the filter type is continuously from lowpass via notch and highpass to bandpass. We attached great importance to the usability of the manual controls and CV inputs for both stereo and dual mono applications. For the filter parameters frequency (F), resonance (Q) and type (T) common controls and CV inputs as well as single controls and CV inputs are available. For the filter frequency in addition a manual control and CV input for the filter spread (frequency difference or delta F) is available.

Controls:
F: master frequency control for both filters (large knob)
Type 1 / Type 2: filter type panning/morphing L-N-H-B
Link to 1: Toggle switch so that Type 1 also controls type of filter 2 (i.e. simultaneous filter type control for both filters)
SFM1 / SFM2: Single Frequency Modulation controls (polarizers), connected to the corresponding sockets SFM1/SFM2 (socket SFM1 is normalled to a fixed positive voltage, SFM2 is normalled to SFM1, that way the controls SFM1/SFM2 work as frequency controls for each filter provided that no modulation signals are patched to the SFM1/SFM2 sockets)
CFM: common frequency control, controls two VC-polarizers which process the signals connected to the two sockets CFM1/CFM2, CFM2 is normalled to CFM1, that way also the same modulation signal (e.g. an envelope generator) can be used for both filters and the level controlled simultaneously by the CFM control
Delta F: controls the difference between the frequencies of the two filters manually (frequency "spread"), at centre position the frequencies are the same
Delta FM: controls the level of the Delta FM signal (socket), which allows to control the spread between the frequencies also by an external control voltage (e.g. by an LFO or ADSR)
Q: controls the resonance of both filters simultaneously
Level 1 / Level 2: attenuators for the two audio inputs
QM/TM1, QM/TM2: attenuators for the modulation inputs QM/TM1 and QM/TM2

Sockets:
In1 / In2: audio inputs (In2 is normalled to In1)
Out1 / Out2: audio outputs
F: common frequency control input for both filters (~ 1V/oct)
Delta FM: Control voltage for frequency spread, processed by the polarizer Delta FM
SFM1 / SFM2: single frequency modulation inputs, processed by the polarizers SFM1 and SFM2, SFM1 is normalled to a fixed positive voltage, SFM2 is normalled to SFM1#
CFM1 / CFM2: common frequency modulation inputs, processed by the two voltage controlled polarizers controlled by CFM knob, CFM2 is normalled to CFM1
QM/TM1, QM/TM2: the addressing of these sockets/attenuators is defined by internal jumpers. QM means Q modulation (i.e. resonance modulation), TM means filter type modulation (QM1 = resonance modulation filter 1, QM2 = resonance modulation filter 2, TM1 = filter type modulation filter 1, TM2 = filter type modulation filter 2), socket QM/TM1 is normalled to a fixed positive voltage, QM/TM2 is normalled to QM/TM1
A 45 degrees triangle next to a socket means that the switching contact of the socket is normalled to a fixed positive voltage (SFM1, QM/TM1).
A vertical triangle indicates the normalling of two sockets (In1>In2, SFM1>SFM2, CFM1>CFM2, QM/TM1>QM/TM2).

If the filters do not behave as expected please pay attention to these peculiarities:

For the controls SFM1, SFM2, CFM, Delta F and Delta FM the centre position is the neutral position as these are polarizers. If the filter behaves unexpected these controls should be set to centre positions for the time being.

For the controls F, Q, Level 1, Level 2, QM/TM1 und QM/TM2 the fully CCW position is the neutral position as these are standard attenuators. If the filter behaves unexpected at least the controls QM/TM1 and QM/TM2 should be set to fully CCW. Via the normalling of the sockets QM/TM1 and QM/TM2 and the associated controls the filter parameters adjusted by the major controls (e.g. Type 1, Type 2 or Q) may be overwritten.

By means of small circles at the bottom right side of the front panel the user can mark the function of the QM/TM inputs. These assignments are possible:

QM/TM1 controls QM1, QM/TM2 controls QM2, the filter types are not controlled by external CVs
QM/TM1 controls TM1, QM/TM2 controls TM2, the resonances are not controlled by external CVs
QM/TM1 controls QM1 and QM2 simultaneously, QM/TM2 controls TM1 and TM2 simultaneously

Depth: 45mm
HP : 12

Notes: Module A-121s is a dual multimode filter which can be used for stereo applications as well as for parallel or serial organized dual mono filters. The core is a 12dB multimode filter identical to the modules A-121-2 and A-121-3. The selection of the filter type is continuously from lowpass via notch and highpass to bandpass. We attached great importance to the usability of the manual controls and CV inputs for both stereo and dual mono applications. For the filter parameters frequency (F), resonance (Q) and type (T) common controls and CV inputs as well as single controls and CV inputs are available. For the filter frequency in addition a manual control and CV input for the filter spread (frequency difference or delta F) is available.

Controls:
F: master frequency control for both filters (large knob)
Type 1 / Type 2: filter type panning/morphing L-N-H-B
Link to 1: Toggle switch so that Type 1 also controls type of filter 2 (i.e. simultaneous filter type control for both filters)
SFM1 / SFM2: Single Frequency Modulation controls (polarizers), connected to the corresponding sockets SFM1/SFM2 (socket SFM1 is normalled to a fixed positive voltage, SFM2 is normalled to SFM1, that way the controls SFM1/SFM2 work as frequency controls for each filter provided that no modulation signals are patched to the SFM1/SFM2 sockets)
CFM: common frequency control, controls two VC-polarizers which process the signals connected to the two sockets CFM1/CFM2, CFM2 is normalled to CFM1, that way also the same modulation signal (e.g. an envelope generator) can be used for both filters and the level controlled simultaneously by the CFM control
Delta F: controls the difference between the frequencies of the two filters manually (frequency "spread"), at centre position the frequencies are the same
Delta FM: controls the level of the Delta FM signal (socket), which allows to control the spread between the frequencies also by an external control voltage (e.g. by an LFO or ADSR)
Q: controls the resonance of both filters simultaneously
Level 1 / Level 2: attenuators for the two audio inputs
QM/TM1, QM/TM2: attenuators for the modulation inputs QM/TM1 and QM/TM2

Sockets:
In1 / In2: audio inputs (In2 is normalled to In1)
Out1 / Out2: audio outputs
F: common frequency control input for both filters (~ 1V/oct)
Delta FM: Control voltage for frequency spread, processed by the polarizer Delta FM
SFM1 / SFM2: single frequency modulation inputs, processed by the polarizers SFM1 and SFM2, SFM1 is normalled to a fixed positive voltage, SFM2 is normalled to SFM1#
CFM1 / CFM2: common frequency modulation inputs, processed by the two voltage controlled polarizers controlled by CFM knob, CFM2 is normalled to CFM1
QM/TM1, QM/TM2: the addressing of these sockets/attenuators is defined by internal jumpers. QM means Q modulation (i.e. resonance modulation), TM means filter type modulation (QM1 = resonance modulation filter 1, QM2 = resonance modulation filter 2, TM1 = filter type modulation filter 1, TM2 = filter type modulation filter 2), socket QM/TM1 is normalled to a fixed positive voltage, QM/TM2 is normalled to QM/TM1
A 45 degrees triangle next to a socket means that the switching contact of the socket is normalled to a fixed positive voltage (SFM1, QM/TM1).
A vertical triangle indicates the normalling of two sockets (In1>In2, SFM1>SFM2, CFM1>CFM2, QM/TM1>QM/TM2).

If the filters do not behave as expected please pay attention to these peculiarities:

For the controls SFM1, SFM2, CFM, Delta F and Delta FM the centre position is the neutral position as these are polarizers. If the filter behaves unexpected these controls should be set to centre positions for the time being.

For the controls F, Q, Level 1, Level 2, QM/TM1 und QM/TM2 the fully CCW position is the neutral position as these are standard attenuators. If the filter behaves unexpected at least the controls QM/TM1 and QM/TM2 should be set to fully CCW. Via the normalling of the sockets QM/TM1 and QM/TM2 and the associated controls the filter parameters adjusted by the major controls (e.g. Type 1, Type 2 or Q) may be overwritten.

By means of small circles at the bottom right side of the front panel the user can mark the function of the QM/TM inputs. These assignments are possible:
QM/TM1 controls QM1, QM/TM2 controls QM2, the filter types are not controlled by external CVs
QM/TM1 controls TM1, QM/TM2 controls TM2, the resonances are not controlled by external CVs
QM/TM1 controls QM1 and QM2 simultaneously, QM/TM2 controls TM1 and TM2 simultaneously

Notes: The Synadrone consists in four combined oscillators that create powerful and organic sounds.

The mix of the four oscillators as well as their arrangement can be varied by acting on the switches. Oscillators modulate each other in a complex way, but you can control the results of this modulation manually with the pots.

The oscillation section includes after the oscillation section a low pass filter with cutoff and resonance controls.

Cutoff and resonance allow to change from very powerful and "full" bass sounds to delicate and very refined highs.

It has the option to send the filter output signal to a delay, with repeat and level controls.

The Synadrone also incorporates a built-in LFO with rate and level controls to modulate the delay time.

Specifications:
Power supply +9v (center Positive)
4 oscimodulations
Filter - cutoff - resonance
LFO
Analogue delay

Notes: Astrogorus is an standalone compact synthesizer focused to harsh noise and drones. Huge sound with infinte possibilities. Easy to operate and built into alluminium case.

Compact synthesizer ideal for harsh noise and drones, three independent oscillators with rate control -a fourth oscillator is the sum of the three previous ones plus noise mixer of the four oscillators + noise

Six controls to select the type of noise on the fourth oscillator

Harmonics

Six band filter/eq
Feedback and level control

Distortion

Distortion level
Feedback
Two band tone control

Power supply

Transformer 24 v positive to the center (included with the device)
1/4" mono jack output

Notes: T-Wrex is an analogue bitcrusher and decimator!

T-Wrex has two separate sections: STOMP is a bitcrusher and CHOMP is a decimator. You can sweep each effect from imperceptible all the way to rumbly, growling sonic debris. Use each section's voltage-controllable dry/wet circuit to find the perfect balance of harmony and havoc!

At the core of each section is a high-speed, low-leakage analog sample & hold circuit. The bitcrusher's SYNC input is ORed with its internal s&h trigger which steps the output voltage. Mult IN to SYNC to force a static waveform, or use another VCO for the bitcrusher equivalent of hardsync!

The decimator's internal analog VCO controls its sample rate, but you can override it by patching your own signal to the SAMPLE input. Use complex waveforms to flavor your decimation (spicy!), or even use subaudio-rate signals for a traditional helping of sample & hold!

T-Wrex provides an attenuverter on each CV input for your patching convenience. Crank the CHOMP attenuverter fully counterclockwise to make the decimator's internal VCO track its CV at 1V/octave!

Specifications:
Power: +12V / 80mA, -12V / 70mA
Width: 12HP
Depth: 30mm (including power connector)

Includes power cable and Befaco Knurlies M3 mounting screws.

Notes: Next-level version of KMA's excellent Tyler frequency splitter pedal. Variable 12dB/oct high- and low-pass filters, isolated effect loop sends, wet/dry mix control and relay-based soft switching.

Supplier's Notes:
Expanding on the already rich feature-set of KMA Machines' popular Tyler pedal, the upgraded Tyler Deluxe is the ultimate Swiss Army Knife for creative musicians to use on their pedalboards, live or in the studio. Ideal for Bass, Guitar or any other amplified instrument, it offers a host of new features and functions and is perfect for developing new sounds with an existing collection of pedals or splitting signals into multiple amplifiers/differing signal chains. All of this helping to lead musicians' creativity down new inspiring parallel paths.

Do you remember the sounds coming from the woods, as a rough and towering man was wielding his frequency-splitting axe? Driven by nature's most primordial force, that man then dropped his simple axe, picked up his power saw and evolved into something more. Something bigger, stronger and more versatile. Standing tall is Tyler Deluxe - the ultimate frequency-selective signal-splitting tool, ideal for developing new sounds and leading your creativity down new inspiring parallel paths.

KMA Machines' Tyler (active and variable two channel crossover/signal splitter) has successfully found its place on many bass and guitar players' boards around the world, helping them refine and define their tone. However never to stand still, the team at KMA Machines decided to step up the game and create a more advanced, versatile and flexible solution, based on the great feedback from users.

The heart of the pedal is still the same essential filter sections, which splits your signal into different loops with HIGH PASS and LOW PASS paths (both filters have a 12 dB/oct. roll-off with a variable cut-off frequency from 20 Hz to 3 kHz). The rest of the vital tonal organs have had a thorough upgrade, which has resulted in an improved noise floor too. So, let's dive into everything that makes this pedal Deluxe.

Since the original Tyler was also used as an advanced AB/Y box by many, it was found that ground loops could occur - no more with Tyler Deluxe ! Both SENDs are now transformer coupled (with TRIAD Magnetics) to give you a nice and warm saturation, while avoiding ground-loops (internal slide-switched ground-lift). To be prepared for almost every situation and every pedal, both loops also got their own phase inversion switch (+/-) to get rid of potential unwanted phase cancellation.

The next new must-have feature is there to ensure the transparency of your setup; the good old CLEAN blend has been added

So far so good, but the deluxe delights don't stop here! A master phase-switch ensures a fixed and reliable interaction with your set filter frequency in every situation, no matter if you either have a loop engaged or not. But wait, for all of you who wants to follow Tyler's evolution, another claimed feature has been added. The LP-CUT and HP-CUT switches will now mute your loops when bypassed, which will give you tons of new options to be creative, by only using the engaged loops without having clean artefacts pass through when disengaging one of the loops.

Modern times brings modern needs, so Tyler Deluxe is now equipped with relay-based soft-switches, an internal step-up to increase the headroom for hotter input signals and low-noise op-amps to improve the overall sound-quality and usability.

Some fun examples of use: Bass players want to retain their low end while using their favourite fuzz or dirt pedal. Insert your dirt box in the high-pass FX-Loop and adjust the cut-off frequency of the High and Low Pass to your needs. Dial in your preferred ratio of those Low and High Pass signals, engage the HP LOOP footswitch and you will never turn off Tyler Deluxe again! You can also insert different modulation pedals, for example insert a lush phaser for the lows and a nice shimmering delay for the highs and Tyler Deluxe will make it sound like two different guitars are playing at once. Mix up your modulation pedals with any of your dirt pedals, for a very pronounced and punchy sound all coming from one amp.

If there ever was a Swiss army knife for your tone, then Tyler Deluxe must surely be it. So, fire up your frequency saw and start defining your own unique sonic path.

Notes: Heavily redesigned for version three, Twisted Electrons offer up a new take on their compact acid synth: dual oscillators, new digital filter, real-time effects and more. Great value.

Supplier's Notes:
acid8 is an 8Bit bass-line synthesizer with a revisited sound and interface.

MKIII has been rethought from the ground up. The filter has been replaced with an new all digital one, the handling has been redesigned for more immediate handling and many other real time features have been added including transposition automation, filter wobbler, stutter and vinyl spin-down effects.

The synth engine now has dual oscillators allowing fat and harmonized sounds.

acid8 MKIII offers the same features as its slimsynth uAcid8 counterpart, but with the addition of hardware MIDI and analog sync in and out connectivity and packed in a rugged metal case.

A vst plugin is available to easily take control of the synth's parameters.

FREQUENTLY ASKED QUESTIONS:

Q:How do I copy/paste a pattern?

A:Hold SLIDE and press OCT- to copy and OCT+ to paste

Q:The briefly LEDS go out when I stop the sequencer - is something wrong?

A:This is normal and occurs when the memory is updated (a few seconds after the sequencer is stopped when a change has been made).

Notes: The Mankato Filter is a four-pole lowpass filter with positive and negative outputs at every pole, giving you slopes of 6 dB/oct, 12 dB/oct, 18 dB/oct, and 24 dB/oct simultaneously. The negative slope outputs allow you to use the Mankato as a quadrature sine oscillator with 8 available phases. The Mankato will self-resonate from subaudio to superaudio, and responds to one volt per octave through its unattenuated control inputs. When resonating, the 6dB/oct outputs are slightly hotter than the others and can be driven to lightly saturate at full resonance. The signal inputs are DC coupled, which allows you to use the Mankato as a voltage-controlled slew limiter at very low cutoff frequencies.

Notes: It's time to break free

Bring your perfect studio guitar sound onstage with the new AmpliTube X-TIME delay pedal. This boutique pedal features 16 all-new delay effects leveraging IK's latest AmpliTube technologies, accompanied by an exclusive virtual X-GEAR version of the exact same effects. Use the virtual version with AmpliTube 5 (SE version included) to record and tweak settings and save as presets on your X-TIME pedal for world-class tone anywhere.

Best-in-show DSP

AmpliTube X-TIME leverages IK's latest technologies for hyper-realistic emulations of real-world gear. The state-of-the-art DSP onboard offers 16 high-end algorithms, while a special X-MODE opens additional infinite-feedback effects. All combined, X-TIME delivers amazing clarity to the stage with the realism and response that users love about AmpliTube 5.

Hardware that stands out

For AmpliTube X-TIME, great effort was made to guarantee your tone stays as pure and pristine as possible, no matter how simple or sophisticated your signal chain becomes.

Industry-leading integration

AmpliTube X-TIME includes a matching virtual version for Mac/PC and a copy of AmpliTube 5 SE. Open any version of AmpliTube 5 and you'll find your virtual X-TIME pedal available as a stomp for use within the program. Adjust any of your pedal settings with the convenience of AmpliTube's award-winning workflow and save them as presets. The X-GEAR Librarian lets you move presets between X-GEAR pedals and AmpliTube and easily reorganize them on the hardware pedal. You can store up to 300 presets per pedal.

All-in-one recording

With AmpliTube X-TIME there's no need for any other gear when it comes to recording guitar. The X-TIME features an USB audio interface and some must-have recording features right onboard.

5Hz to 24kHz frequency response to record the full range of your guitar or bass
Versatile routing options let you send the wet or dry signal to your DAW
Stereo out for monitoring sound between the X-TIME pedal and your computer
Full MIDI implementation to map control

From soundcheck to final encore

When it's time to play out, AmpliTube X-TIME holds everything you need to perform at your best. In fact, you can even leave your amp and cab at home, if you want to.

Fast, intuitive interface and control knobs to tweak your sound on the fly
High-contrast LED display keeps you informed on everything, indoors and out
Expression pedal input adds additional control over any parameter you choose
Full MIDI implementation is built-in for even the most complex setups
5 cabinet impulse responses let you connect directly to a powered cab or PA

With great tone comes great portability

With its open architecture for future updates, AmpliTube X-TIME will empower you no matter where you are and for years to come. Experience the freedom of moving between the studio and stage seamlessly, confident that you and the audience hear your sound exactly as you created it to be.

Notes: It's time to break free

Bring your perfect studio guitar sound onstage with the new AmpliTube X-VIBE modulation pedal. This boutique pedal features 16 all-new modulation effects leveraging IK's latest AmpliTube technologies, accompanied by an exclusive virtual X-GEAR version of the exact same effects. Use the virtual version with AmpliTube 5 (SE version included) to record and tweak settings and save as presets on your X-VIBE pedal for world-class tone anywhere.

Best-in-show DSP

AmpliTube X-VIBE leverages IK's latest technologies for hyper-realistic emulations of real-world gear. The state-of-the-art DSP onboard offers 16 high-end algorithms, while a special X-MODE opens additional hyper-modulation effects. All combined, X-VIBE delivers amazing clarity to the stage with the realism and response that users love about AmpliTube 5.

Hardware that stands out

For AmpliTube X-VIBE, great effort was made to guarantee your tone stays as pure and pristine as possible, no matter how simple or sophisticated your signal chain becomes.

Ultra-low noise, 24-bit/192kHz converters for class-leading sound quality
5 Hz-24 kHz frequency response to capture the full scope of your guitar's sound
112 dB dynamic range provides whisper-quiet operation at any gain setting
Selectable true or soft bypass for maximum control

Industry-leading integration

AmpliTube X-VIBE includes a matching virtual version for Mac/PC and a copy of AmpliTube 5 SE. Open any version of AmpliTube 5 and you'll find your virtual X-VIBE pedal available as a stomp for use within the program. Adjust any of your pedal settings with the convenience of AmpliTube's award-winning workflow and save them as presets. The X-GEAR Librarian lets you move presets between X-GEAR pedals and AmpliTube and easily reorganize them on the hardware pedal. You can store up to 300 presets per pedal.

All-in-one recording

With AmpliTube X-VIBE there's no need for any other gear when it comes to recording guitar. The X-VIBE has a USB audio interface and some must-have recording features right onboard.

5Hz to 24kHz frequency response to record the full range of your guitar or bass
Versatile routing options let you send the wet or dry signal to your DAW
Stereo out for monitoring sound between the X-VIBE pedal and your computer
Full MIDI implementation to map control of AmpliTube and/or any compatible DAW

From soundcheck to final encore

When it's time to play out, AmpliTube X-VIBE holds everything you need to perform at your best. In fact, you can even leave your amp and cab at home, if you want to.

Fast, intuitive interface and control knobs to tweak your sound on the fly
High-contrast LED display keeps you informed on everything, indoors and out
Expression pedal input adds additional control over any parameter you choose
Full MIDI implementation is built-in for even the most complex setups
5 cabinet impulse responses let you connect directly to a powered cab or PA

With great tone comes great portability

With its open architecture for future updates, AmpliTube X-VIBE will empower you no matter where you are and for years to come. Experience the freedom of moving between the studio and stage seamlessly, confident that you and the audience hear your sound exactly as you created it to be.

Notes: The ultimate metal tone? An evolution of the brand's excellent Wurm distortion with the addition of an ultra-fast VCA-based noise gate, ideal for HM-2-inspired chainsaw tones. Heavy.

Supplier's Notes:
Fusing together the powerful evolution of KMA's highly regarded Wurm Distortion with an intuitive, yet versatile and ultra-fast Noise Gate, Guardian of the Wurm is the perfect metal monster. From chugging hard-rock, droning doom metal and grinding Swedish death metal, the beast abides. But through its highly tweakable control set, the pedal can be tamed to provide impeccable clarity to your riffs, making this the definitive dirt pedal for metal, prog-rock, shoegaze, indie and beyond.

Power by opt. 9 V PSU (9 V DC, centre -, 2.1 mm, >150 mA max. current draw)

Notes: Part of Sonicware's excellent Liven groovebox series, the XFM is a modern take on classic digital FM sounds, offering a choice of intuitive and quick sounds or logical and deep programming.

Supplier's Notes:
Classic FM sounds, effortlessly merged with FM FUSION.

Using the 4-track sequencer and presets, you can construct an entire song.

Three Fusion FM Engines X-LAB Engine
Merge two FM sounds with a single knob to create a completely new sound.

XFORM Engine
Transform one FM sound into another over a specific period of time.

X-LFO Engine
Continuously transform between two FM sounds using an LFO.

Over 300 Inspiring Preset Sounds
Ready-to-use presets including, leads, keyboards, strings, winds, basses, pads, chords, drums, and sound effects.

Two approaches to FM sound design

Intuitive and Quick
Merge and sculpt FM sounds with a single, intuitive, knob turn.

The X-Lab engine merges two FM sounds by smoothly blending their envelopes, modulation routing, and feedback. The X-Lab algorithm can merge sounds with radically different FM structures and overtones, all without losing the fundamental tuning of the sound. Pitch locking can also be turned off to create brilliant atonal transitions between FM sounds.

Merged sound can then be saved, recalled, and merged with additional FM sounds. This is called merging process FUSION FM.

Logical and Deep

For those who want to dive into the FM Engine, the EDIT mode and included overlay provide full access to the innovative 4-OP XFM engine.

15 knobs and 30 buttons provide quick and intuitive access to all FM parameters.

Explore FM synthesis without the conventional menu diving and head scratching.

4-Track Step Sequencer

Perfect for song production and live performance

Manage lead, bass, rhythm, and more, each on separate tracks.

Sequence up to 64 steps per pattern.

Save up to 128 patterns.

The parameter locking function allows you to record knob changes into your patterns. This automation function can be recorded live, or programmed in step by step.

Sub-divide the tempo down to 32nd notes for higher resolution sequencing.

Sequence longer notes across several steps, AKA Tied Notes.

Specifications:

Size
297mm (W) x 176mm (D) x 48mm (H)
11.7 in (W) x 6.92 in (D) x 1.89 in (H)

Weight:
790g/1.74lb.

Keyboard:
27 keys (with a hold function)

Knob:
15 physical control knobs
Optional LATCH function prevents jumps in value when knob position and parameter values do not match. LCD dot indicates when a parameter value matches the saved value, or when the value has been changed.
One physical encoder

Audio output:
Stereo line out (stereo 3.5mm mini jack)
Headphone out (stereo 3.5mm mini jack)
Compatible with Teenage Engineering Pocket Operator2 Series SYNC OUT
Speaker

Audio in:
LINE IN (stereo 3.5mm mini-jack)
Compatible with Teenage Engineering Pocket Operator 2 Series SYNC IN

Interfaces:
MIDI IN connector (5-Pin DIN type)
MIDI OUT connector (5-Pin DIN type)
SYNC IN jack (monaural 3.5mm mini jack)
SYNC OUT jack (monaural 3.5mm mini jack)

Power supply:
9V DC output AC adapter
Current: 1A or greater
Plug Type: EIAJ3 Standard
Inner Diameter: 1.7mm
Outer Diameter: 4.75mm,
Polarity: Center +
Compatible with power supplies designed for the Korg Volca 1 .
6 AA batteries

Synth Engine:
Four FM synth engines, X-LAB, XFORM, X-LFO, and LIBRARY

Voice mode:
6-note polyphonic mode
Mono mode
Legato mode with adjustable glide time
Arpeggiator modes (Up, Down, UpDown, DownUp, Up&Down, Down&Up, Up+1, Up+2, Down-1, Down-
2, Random, Play Order)

Sweep:
Sweep with adjustable speed, range, and curve

Filter
Low Pass
High Pass
Band Pass
Each track has its own filter envelope.

Effects:
Chorus
Flanger
Send Delay
Insert Delay
Bit Crusher
Reverb
Distortion
Low Pass
High Pass
Isolator

LFO:
Each track has one LFO which can affect both pitch and filter cutoff.
Adjustable LFO Shapes.
Adjustable start time delay for each LFO.

Sound memory:
512 FM sound memory slots (16 x 32 banks)

Sequencer:
4 tracks
Up to 64 steps per pattern
128 patterns
Step length can be set from 1/1 to 1/32
Enter longer notes (Tie)
Track level and pan can be set independently
FX send amount can be set independently for each track
Pattern BPM / Global BPM can be set
Step copy and paste function
Track copy and paste function
Transpose function
Real-time recording
Directly enter notes for each step when sequencer is on or off
Parameter lock function
Random playback function (Playback step size can be set)
Stutter function
Note Trigger probability can be set between 25% and 100%
Pattern chain function
Metronome and pre-count function
Swing function

MIDI:
Notes, control changes, clock input/output
IMPORT/EXPORT of user data
Firmware update via Sysex

Accessories:
FM sound editing overlay
Warranty

The AC adapter is not included.
Please use 9V DC output AC adapter (1A or higher, EIAJ3 standard inner diameter 1.7mm outer diameter 4.75mm, center +).
Compatible with power supplies designed for the Korg Volca 1.

Notes: Designed for Frap's CGM Creative Mixer modules, the Masterone takes an input via IDC socket rather than standard Eurorack connections, then feeds out to headphone outs, balanced stereo XLR, TRS and mono.

Supplier's Notes:
The Masterone is the first Frap Tools module designed to be connected exclusively with non-Eurorack equipment.

It features four separate output sections with different Neutrik connectors and adjustable gain levels to suit the most common live and studio situations (and even some uncommon ones).

With no inputs and just large-format outputs, it pushes even further the concept behind the M module: being a Eurorack system's gateway to the outside world.

XLR Balanced Stereo Outputs

Two XLR connectors (left and right) provide a balanced output with the expected 6 dB extra gain. In many cases, they can allow bypassing a DI box.

TRS Pseudo-Balanced Stereo Outputs

These outputs are very similar in concepts to the ones on the M module, but with large 1/4" jack connectors. It is possible to patch standard TS cables and use them as unbalanced outputs, or use TRS cables to interface them with balanced equipment (the ground is routed to both the ring and the sleeve, for a better performance than regular unbalanced outputs).

Attenuation Switches for Flexible Connectivity

If the two stereo outputs are too hot, a set of switches can attenuate them. The Line/Mic switch on the XLR outputs attenuates them by ~30 dB, while the Line/Inst switch on the TRS outputs attenuates them by ~15 dB.

Stereo Headphones Output with Pre-Fader Listening

The Headphones section allows you to monitor the Master output with an independent volume knob and, at the same time, take advantage of the PFL function on the Channels and the Groups. Rotate the PFL crossfader towards the blue section to blend the PFL modules with the Master sum and check if everything is okay before launching the next scene.

Mono Output with Dedicated Fader

Should you need an extra monitor on stage, or run the whole system through a vintage amp in the studio for parallel processing, the auxiliary monophonic outputs is the answer. It provides the sum of both channels in a handy, pseudo-balanced output with a dedicated fader: attenuate the line level by 15 dB, or amplify it by 6 dB.

12-LED VU Meter with Memory

A detailed VU Meter monitors the signal amplitude from -40 to +15 dB with peak memory on the upper LEDs.

Dimensions:

12HP

38 mm deep

85 mA +12V - 80 mA -12V

with headphones at high level (250O)

110 mA +12V 105 mA -12V

Notes: Wave Expander bridges the gap between the Melody Miracle and Touch Tones synthesizers, and the rest of the synthesizer world. Control other synths by sending CV and gate signals via Wave Expander, and dial in the right amount of control with onboard CV tuners. Outputs are visually indicated with the Chrominancer color window at the center of Wave Expander, bringing cosmic insight to the signals at hand.

Melody Oracle and Touch Tones expander module
Use AMP synthesizers to control external gear
12 outputs (6 CV/6 Gate)
CV Range: 0V to +12V
Chrominancer color window

Notes: Unique touch-activated instrument with built-in speaker, allowing you to trigger notes with one hand and modulate the timbre via touch pads. Unorthodox tones, unorthodox interface. Lots of fun.

Supplier's Notes:
Touch Tones is a touch activated auto harmonic synthesizer, with a 3 octave tuning range, XOR logic modulator, Harmonicon auto harmony generator, and two onboard bandpass filters. The left side of the Touch Tones holds three capacitive touch pads for playing notes, while the right side contains a set of 7 touch pads to modulate the different parameters sequencing the synthesizer.

Three octave range plus XOR modulator.
Harmonicon automatic harmony keys play a perfect 5th of each tuned ROOT note.
Dual Luma filters for active timbral shaping via light control.
Wear the Touch Tones for Function or Fashion with the included chain lanyard.

Notes: Hue is an audio colour processing effect, in 6HP eurorack format. Hue is comprised of a chain of 5 effects (Drive, Filter, Tape Saturation, LoFi, Compressor). Each effect imparts a particular coloration, tone, distortion, and/or texture to the source audio. With Hue, Drums bang with more intensity & melodies morph into lush LoFi tones.

Hue's goal is to simply colour your sound. The initial concept was born of a debate about the techniques and processes used to make drum machines sound big, bold, and delicious. The sounds that tug at the hearts of boombap, LoFi, and subsequently modbap, enthusiasts are those that have great texture, lush degradation, soft distortion, and big bold strokes of colour. The classic beloved drum machines were often processed with outboard gear, recorded to tape, pressed to vinyl, played in big booming systems, sampled, and resampled and on and on. Ultimately, those are the sounds that become nostalgic and reminiscent of all that we love about classic LoFi boombap production. Hue is Modbap's attempt at bringing that vibe into eurorack with a cute little 6hp package.

The effects chain audio signal path is as follows; Drive, Filter, Tape Saturation, LoFi, Compressor. The panel layout allows for the DJ style filter knob to sit in first position for ease of tweaking. Drive boosts and lightly distorts the signal, while shift+Drive adjusts the Drive tone. The Filter is a low pass filter to the left and a high pass filter to the right. Tape effect is intended to impart cassette tape saturation, while shift+Tape adjusts the intensity. LoFi adjusts bit depth, while shift+LoFi adjusts sample rate. Lastly, the one knob compressor mini pot serves as the final glue in the signal path that brings it all together.CV inputs for Drive, Filter, Tape Saturation, and LoFi opens loads of creative possibilities. Hue is a textural beast when creative modulation is thrown at it.

Hue puts the power to shape and transform your sound at your fingertips. It's great for beefing up drums and equally as magical on melodic content. Hue can be the glue that brings it all together. It also, pairs well with Trinity and Osiris. All in all, Hue exemplifies the tagline "Made for eurorack, dope enough for boombap!"

Tech Specs

Width: 6HP
Depth: 28mm
Power: 50mA +12V, 50mA -12V

Features
5 effects (Drive, Filter, Tape Saturation, LoFi, Compressor.)
4 CV inputs for modulating the effects
Mono in and mono out
6HP

Notes: The #1 EQ pedal returns - better than ever

Empress Effects have brought back the most sought-after Parametric EQ pedal, with groundbreaking upgrades.

Everything people loved about the original ParaEq was kept, and more fidelity and control have been added.

More Control

Whether you're trying to cut through a mix or fix a feedback issue, you need precision! The ParaEq MKII offers the most control of any pedal EQ on the market.

More Sweetness

Effortlessly sweeten your tone with beautiful sounding, super smooth Baxandall filters for broad high and low frequency shelving adjustments on the Deluxe.

More Power

The ParaEq MKII pedals operates internally at 27V, providing clean headroom without unwanted clipping.

More Purity

This pedal is able to offer the most control without degradation to the tone due to minimal circuit topology00-the opposite of graphic EQs.

Why Choose Parametric EQ over Graphic EQ?
Parametric VS Graphic EQ Graph
Graphic equalizers provide a convenient visual sense of the EQ curve. However, there is a tradeoff in transparency and precision.

The graph here shows the ParaEq MKII Deluxe (cyan) and a 7-band graphic EQ pedal (magenta) both providing a +4dB boost at around 2 kHz. As can be seen, the ParaEq is much more precise in the changes it can make, whereas the graphic EQ affects nearly the entire frequency spectrum. Furthermore, at around 10kHz the ParaEq is providing unity gain, whereas the graphic EQ is attenuating the signal by nearly 6dB. This makes the ParaEq a more transparent circuit than the graphic EQ.

This combination of transparency and precision is why recording studio control rooms are dominated by parametric equalizers, and why they're a great choice for creative and corrective EQ on your pedalboard.

Which ParaEq Do You Need?

The original ParaEq has been loved and trusted by musicians on a variety of instruments for over a decade. Both the ParaEq MKII and the ParaEq MKII Deluxe feature a low-noise, transparent signal path that is extremely versatile.

With three fully parametric bands, you can simultaneously achieve broad tonal shaping and precise fine-tuning to sculpt your perfect sound.

The ParaEQ MKII Deluxe will appeal to players who:

Need high-pass and low-pass filters for precision work at the frequency extremes
Want the glorious sound of Bandaxall filters for sparkling high end or extra weight in the low end
Want to be prepared for any EQ situation

Specifications

Input Impedance: 1MO
Output Impedance: 100O
Frequency Response (-3dB): 22Hz - 25kHz
Total Harmonic Distortion: < 0.05%
Noise: > 107dB
Headroom: +30dBu
Input Voltage: 9VDC Centre-Negative
Required Current: 300mA
Power Input Connector: 2.1mm Barrel Connector
Height (Enclosure Only): 1.5"
Height (Including Controls): 2.5"
Length: 3.5"
Width: 4.5"
Weight: 1lb

Notes: A full size version of Mutable Instruments Warps. It is functionally identical and will run all firmware that ran on the original.

Width: 10hp
12V: 110mA
-12V: 5mA

Notes: Dusky drama

Gloamer is an all-analogue, polyphonic amplitude synthesizer that alters the attack and decay time of any sound source without sacrificing the fidelity of the original tone. Its attack function provides a pick-triggered volume swell: a cinematic "slow gear" effect that is smooth and controllable with variable timing from extremely fast to very slow. The volume swell cycle can be reset at any moment by muting, allowing players to craft bowed string-like lines and chords with ease. Gloamer also features a powerful optical compressor that can add subtle punch or extreme sustain, helping to maintain a smooth volume swell effect even with very long attack times. A Volume knob controls loudness at the peak of the attack cycle, while a master Blend control allows players to layer an uncompressed clean sound in with the volume swell effect. Additionally, when activated, the Decay function causes notes to fade out once the attack cycle is complete. When the decay cycle is completed, an auto-reset function causes the attack to begin again immediately, as long as there is audio input. This allows you to create a wide range of undulating, asymmetrical tremolos at slower settings as well as pulsating stutter effects when using faster attack and decay times.

Knob-by-knob

Volume: Sets the master output volume of the effect when engaged.
Compression: Determines the balance of clean and compressed signal.
Blend: Determines the balance of clean signal and effect.
Attack: Determines the duration of time it takes for a note to swell in from silent to full volume.
Decay: Determines the duration of time it takes for a note to fade out from full volume to silence.
Sensitivity: Determines how much input signal is needed to reset the attack and decay cycle.
Ready (LED): Signals when the pedal is armed and ready to begin the attack and/or decay cycle.

A hi-fi attack and decay master
Gloamer was designed to allow players to change the nature of their attack and decay while maintaining pristine, hi-fidelity audio. Easily swell blooming single note lines or full, lush chords and become the string section you've always wanted to hire but can't afford.

Model name: Gloamer
SKU: ATS
Function: Volume Swell with Compressor
Category 1: Modulation
Category 2: Compression

Bypass: True Bypass

Electronics

Voltage: 9VDC
Current draw: 100mA
Input impedance: 470K
Output impedance: 150 ohms

Body:

Length (in): 3.5
Width (in): 4.75
Height (in): 2.5
Weight (lbs): 1

Notes: The Aether is a modulating delay pedal.

The initial vision for the design of The Aether came shortly after the release of the Wardenclyffe Deluxe. The intention was to take design the philosophies and incorporate tonal characteristics that made the Wardenclyffe so special, but this time as a delay pedal.

At the heart of The Aether is a PT2399, tap tempo delay. It has the standard Echo, Feedback, and Time controls you would expect on any delay, but what makes it special is the Color, Saturation, and Degrade Controls. The Color toggle completely changes the character of the Aether and has two voices: Warm Analog and Bright Tape. The Saturation knob is a gain adjustment that overdrives the delay chip. The Degrade toggle adds lofi textures and artifacts to the delay line. The Degrade toggle removes a very vital section of the delay circuitry that keeps the delay stable with longer delay times. As you increase the delay time, the artifacts become more present and lofi.

The Aether uses a simple, but versatile modulation LFO core inspired by the Wardenclyffe, but with more features. The LFO cores sets it apart from other modulated delays out there. The speed of the modulation core can be set 3 different ways: Rate knob, tap tempo tact switch, and Sync toggle. When the Sync toggle is set to its middle position, the LFO can run at whatever speed you want. When the Sync toggle is in the up position it is synced to the delay time. When the Sync toggle is in the down position, it is synced to delay time, but in half-time for slower evolving moduation. The Shift knob determines the depth of the modulation; this has plenty of range in case you want to get really obscene. The Stray toggle changes the LFO from a typical Sine wave to a Slewed Random waveform. Creative exploration of the modulation section of The Aether is strongly encouraged. The way the delay rate and LFO rate interact with each other can yield very creative results.

Notes: Room #40

Marshall Mojo in a Box

Heavily inspired by the tone and feel of the following legendary Marshall amps: the non master volume series PLEXI Super Lead (1959/1987) & Super Bass (1992) and the master volume series JMP & JCM800 (2203/2204).

Over the years, Tsakalis have had many different types of Marshall amps on their workbench, some for repairs and others for customisation. Being huge fans of the sound of these classic amplifiers, Tsakalis decided to try and capture its mojo - the true essence of the soul of this sound - and carefully place it in a little box. Thus the Room #40 was born!

Using JFET technology, Tsakalis tried to stay loyal to the tone and feel of the following legendary Marshall amps: the non master volume series PLEXI Super Lead (1959/1987) & Super Bass (1992) and the master volume series JMP & JCM800 (2203/2204).

Tsakalis emphasized on emulating the compression and sag coming from the power amp section, when these amps are pushed to the edge, while at the same time giving access to two famous mods, mod #39 (PLEXI) and mod #34 (JMP & JCM800).

Finally, the Presence control was incorporated to make the sound adjustable to any circumstance, regardless of whether you are plugged into the front of an amp that may or may not have a bright cap or even straight to a power amp.

Product Height (cm): 5.600
Product Width (cm): 7.300
Product Depth (cm): 12.300
Product Weight (kg) 0.314

Box Height (cm): 6.500
Box Width (cm): 0.300
Box Depth (cm): 14.800
Boxed Weight (kg): 0.385

Notes: *** New features in version 2.0 ***

The new features expand its capabilities meaning it's easier to use whilst making it a more flexible music production tool.

Resampling

Patterns and tracks can be resampled by internally recording the audio output into a new sample. Real-time resampling of your keyboard playing is also possible.

Chopping

Two new voice modes called 'Drum' and 'Chop' auto-slice samples easily with the newly developed Downbeat Divider*. Sliced sections of a sample are then spread across the keyboard making finger drumming possible.

Remix Effect

A beat repeater effect 'R.MIX', added to the master effect options, makes glitchy real-time performances possible.

The new features are designed to work well with each other so you can easily create drum tracks with auto-slicing and record lively performances that are not constrained by the grid of the internal step sequencer.You can also resample samples and tracks for infinite effects processing.

A quirky take on sampling from this 12-bit groovebox inspired by classic 12-bit samplers like the Akai MPC60. Gritty, distinctive sound and some nice sequencing options.

Supplier's Notes:
Retro sampling engine with 12bit Sampler mode

The LIVEN Lofi-12 has a 16bit - 12kHz/24kHz sampling engine with the 12bit Sampler mode that will turn any sound into a pleasing lo-fi sound.

Like the many legendary samplers that were released in the late 80s, this is a genuine low-bit and low sampling frequency sound that cannot be obtained authentically with bit crusher effects and other modern sound degrading tools.

Up to 4 seconds mono sampling per sample slot (2 seconds mono sampling at the 24kHz mode). Start and end point trimming, pitch adjustment, reverse playback, sustain loop, filtering and LFO modulation are all possible.

Easily play samples chromatically across the keyboard

Sounds sampled by the LIVEN Lofi-12 are automatically assigned to the keyboard and can be played easily at different pitches.

The well-known vintage sampler technique of sampling a 33 RPM vinyl at 45 RPM then slowing it down created the gritty, lo-fi sound that is often heard in '90s hip-hop.
The LIVEN Lofi-12 makes it easy to recreate that sound!

80 carefully selected lo-fi preset sounds are included.

Powerful 4-track sequencer with parameter and sound locking
The LIVEN Lofi-12 is equipped with the powerful 4-track step sequencer that has earned the LIVEN XFM a solid reputation.

You can easily create a 4-part song by selecting a sampled sound for each track, and with the Sound Lock function, you can easily switch sampled sounds for each phrase or sequencer step, allowing you to use an almost infinite combination of sounds within a single song.

Sequence up to 64 steps per pattern.

Save up to 64 patterns.

Sub-divide the tempo down to 32nd notes.

Program notes step by step or record them in real time. Additionally, you can also input notes to specific steps while the sequencer is playing to add variation.

The Parameter Lock function allows you to record knob changes into your patterns. This can be recorded live, or programmed in step by step.

The Sound Lock function allows you to record selected sound changes into your patterns. You can use an almost infinite combination of sounds within a single song.

Laid-back knob for creating drunk beats
The Laid-back knob on the LIVEN Lofi-12 allows you to delay the start of the selected sampled sound.

For example, you can slightly delay the snare drum sound in your drum pattern, or use the Parameter Lock function to shift the sound timing later for each step individually.

11 types of Effects each track and 8 types of Master Effect
The LIVEN Lofi-12 features independent effects on all four tracks.
You can select from 11 types of effects from the LIVEN series, and the effect parameters can be automated in steps using the Parameter Lock function.

In addition, 6 types of high-quality Reverbs + Cassette Tape Simulator and Vinyl Simulator are included as the master effect.
The send amount can be adjusted for each track for mixing.

Specifications

Sampler
16bit - 12kHz or 24kHz (switchable) linear PCM sampling (mono)
12bit Sampler mode
Sampling up to 4 seconds per sample (12kHz) or 2 seconds per sample (24kHz)
Auto start sampling function with the input level (input level can be set)
Start/end point, attack, release, pitch, and level adjustment
Reverse playback
Sustain loop settings
Maximum polyphony: 10 voices
128 sample memory slots (16 x 8 banks)
Import and export of a slot or banks of samples (via MIDI)
*Import of audio files from PC/Mac is not supported.


10-note polyphonic mode
Mono mode with adjustable glide time
Legato mode with adjustable glide time
Arpeggiator modes (Up, Down, UpDown, DownUp, Up&Down, Down&Up, Up+1, Up+2, Down-1, Down-2, Random, Play Order)

Filter
Low Pass
High Pass
Band Pass
Each track has its own filter and envelope

LFO
Each track has one LFO which can affect both pitch and filter cutoff with separate adjustable levels
Adjustable LFO Shapes
Adjustable start time delay for each LFO

Sweep
Sweep with adjustable speed, range, and curve

Effects

Track effects

One effect per track
Chorus
Flanger
Tremolo
Delay
Distortion
Bit Crusher
Low Pass Filter
High Pass Filter
Isolator
Tilt EQ
Compressor

Master effects

Reverb send amount can be set independently for each track
Hall Reverb
Room Reverb
Arena Reverb
Plate Reverb
Tunnel Reverb
Infinity Reverb
Cassette Tape Simulator
Vinyl Simulator

Sequencer

4 tracks
Up to 64 steps per pattern
64 patterns
Step length can be set from 1/1 to 1/32
Real-time recording
Directly enter notes for each step when playback is on or off
Enter longer notes (Tied notes)
Metronome and pre-count function
Step copy and paste function
Track copy and paste function
Transpose function
Swing function
Pattern BPM / Global BPM can be set
Pattern chain function