Genelec

Notes: Short table stand providing a raised position for loudspeakers. Heavy black cast iron base with anti-vibration rubber ring, diameter 17 mm. Mounting 3/8" thread on the tube top. Preferably used together with stand plates for better positioning. Suitable for 8010, 8020, 8030 and corresponding G and 4000 Series models (G One, G Two, G Three, 4010, 4020 and 4030). These models have an integrated 3/8" thread for possible direct fixing without stand plate. 8040, G Four and 4040 require also a 8040-408 Stand plate, because they have an unsuitable M10 thread. As the 4040 is shipped without an Iso-Pod, also an Iso-Pod kit 8040-440 is needed.

Not to be used with 8331.

Width: 180 mm
Height: 170 mm

Notes: 8000 series Genelec stand plates are designed for use together with the Iso-Pod that comes with all 8000 series monitors. The Iso-Pod allows you to tilt the monitor for optimal alignment. Simply mount the stand plate onto the 3/8" thread on the tube and ensure tight screw connection. Place the Iso-Pod over the four pins of the stand plate. Available in black.

Width: 114 mm

Notes: Dark grey version of the 8030C, part of Genelec's iconic range of compact monitors. Max SPL of 104 dB and frequency response of 47 Hz - 25 kHz mean that the 8030Cs pack a bigger punch than their 30 x 19 cm dimensions would suggest.

Supplier's Notes:
If you love the compact format of the 8010 and 8020 models but demand higher SPL and more bass extension, meet the 8030C.

Welcome to the sweet spot

Short term max SPL: >104 dB

Maximum short term sine wave acoustic output on axis in half space, averaged from 100 Hz to 3 kHz at 1 m.

Long term max SPL: >96 dB

Maximum long term RMS acoustic output in same conditions with IEC weighted noise (limited by driver unit protection circuit) at 1 m.

Self-generated noise: <5 dB SPL

Self generated noise level in free field at 1 m on axis (A-weighted).

Weight: 5 kg (11.0 lb)

Dimensions

Height: 285 mm (11 1/4 in)
Height with Iso-Pod: 299 mm (11 3/4 in)
Width: 189 mm (7 1/2 in)
Depth: 178 mm (7 in)

Enclosure

Enclosure material: Die cast aluminium
Enclosure type: Reflex port

Drivers

Bass

Driver type: Cone
Diameter: 130 mm (5 1/8 in)

Treble

Driver type: Metal dome
Diameter: 19 mm (3/4 in)
Harmonic distortion

50-100 Hz <2 %
> 100 Hz <0.5 %

Amplifiers

8030C bass amplifier: 50 W Class D
8030C treble amplifier: 50 W Class D

Mains voltage: 100-240 VAC 50/60Hz

Power consumption

ISS Active: <0.5 W
Idle@ <3 W
Full output: 60 W

Signal processing section

Connectors

Input: Analogue signal input connector XLR female, balanced 10 kOhm.

Crossover

Bass/Treble: 3000 Hz