Synthesisers

Notes: JMT have designed a very complex interplay between the two oscillators, using two different oscillator circuits with different circuit configurations, and two different waveform conversion circuits attached to each. The output is then routed through a circuit that was developed from the SNB-2b, which emphasizes and distorts the bass, mids, and treble, and which have been tuned to work well with this oscillator.

Fine-tuning of circuit part values was performed to obtain a sound with depth as well as intense distortion by fine-tuning the knobs.

This runs on DC 9V negative center or a 9v battery.

Noisy analogue synthesizer oscillator with distortion function that can emphasize HI, MID, and LO.

The oscillator can be input to a VCO with a wide range and a SUB VCO adjustable by LEVEL.

The VCO and SUB VCO are designed to affect each other in complex ways, so a wide range of sounds can be created by subtle combinations of knob positions.

The MODE switch makes the connection between the SUB VCO and VCO more complex, and the LEVEL knob can be used to adjust the level of the SUB input to create different waveform changes.

By fine-tuning the LEVEL, SUB, VCO knob, you can create a variety of sounds by emphasizing high, mid, and low frequencies.

The CV IN jack is a 3.5mm jack. OUT PUT 6.5mm

Notes: The JMT RVO-3 is an analog noise synthesiser featuring 2 oscillators. 1 main oscillators with 1 sub oscillators paired to it. Each of the oscillators features their own frequency controls, and sync switches for each of the oscillators pairings allowing a wide range of textures. It has a main VCO with a frequency control knob and a push button allowing a short envelope to control the frequency. Additionally, controls for the waveshapes and stability of the VCO and sub frequency VCO allow for further manipulation of timbre.

Notes: The NOSC-12, from JMT Synth, is a 12 oscillator drone synthesiser, six main oscillators with six sub oscillators. There are frequency controls for each of the oscillators, including the sub oscillators, which also include sync switches for each of the oscillator pairs. Each of the oscillators are mixed together to a 1/4" output jack.

NOSC-12 Features

12 Oscillator Drone Synth
12 Suboscillators, one per Osc
Volume Controls for each OSC
Sync switches for each OSC.

Notes: The TVCO-2 is an analogue synth that is powered by a single DC9V~DC12V or 9V battery.

By touching the five sensors directly connected to the circuit of the analogue synth oscillator with your fingertips, the tone of the oscillator peculiar to thick analog synths changes in various ways.

Since it responds delicately, the tone changes depending on whether you touch it strongly or touch the sensor with or without touching it, and whether you touch two, three, or a combination.

The top two sensors are connected to the MAIN VCO and the SUB VCO for input to the VCF, so you can use this sensor to change the VCF (filter) with touch sense to create more complex tones.

The bottom three sensors are connected to the circuit of the MAIN VCO. This sensor can make a noisy change directly to the main sound output oscillator, and the way it changes changes with a combination of touches, such as touching it at the same time in combination with the touch of the SUB VCO.

With a simple structure of 2 VCOs and 1 VCF (band-pass and low-pass switchable), you can intuitively operate this equipment to create your own sounds.

The MAIN VCO and VCF have CV IN. By attaching a 3.5mm conversion jack, you can connect from sequencers, analog synths, and modular synths CV OUT for a wider variety of expressions.

Compared to cable patches and switches, subtle changes can be made instantly at the fingertips, so it is a model that can be controlled more sensitively.

This analogue synth runs on DC9V negative center or a 9V battery.

The main VCO can be controlled with FREQ. knob and 3 touch sennsors.

Sub VCO has two touch sensors and effects to main VCO and VCF as CV.

CV INs can recieve CV OUT of other instruments,sequencer, LFO, etc..

Notes: Really nice boutique analogue synth from JMT, based around a main oscillator with three sub signals, a frequency-synced resonant filter, noise source and three-speed random trigger.

Supplier's Notes:
DNVO-1 is a handmade, compact analog synthesizer from JMT Synth Its primary oscillator can be synced with three sub oscillators, each with a different range, as well as a noise source and wave generator. The latter source can be manipulated with the 3-speed random trigger for effective fluctuations within a single performance. The primary VCO is routed through a self-oscillating filter, which can sync with the VCO's frequency.

Notes: No-nonsense analogue business here from JMT. Square wave VCO and sub-oscillators can be morphed and wave folded to create unique timbres.

Supplier's Notes:
The JMT Synth EWG is a desktop analog synthesiser with a wide-ranging VCO and two reconfigurable sub-oscillators that emit square waves, ideal for thick bass tones. Two adjacent knobs can control the pulse of the square waves, allowing for a wide range of tones and timbres. Two reduce knobs govern the leve of each sub-oscillator, allowing the user to blend the tones to their taste. The EWG-1 is powered by a DC9V center negative adapter or a single 9V battery.

Notes: Part of JMT's no-frills synth range, the SNB-2b offers a single voltage-controlled oscillator with three sub-oscillators, allowing you to blend and distort harmonics to create thick, juicy tones.

Supplier's Notes:
The SNB-2b is powered by a centre negative DC 9V adapter or a single 9V battery.

The SNB-2b is a noisy analogue synth oscillator with a distortion function that can emphasize HI, MID, and LO.

The oscillator can be input to the MAIN VCO with a wide range, and the three complex input SUB oscillators can be adjusted at LEVEL and input to the MAIN VCO.

Each of the three SUB oscillators is designed to affect each other, so a wide range of settings are possible with subtle knob position combinations.

The three oscillators are directly input to the waveform of the MAIN VCO, and different waveform changes can be added by adjusting the input level with the LEVEL knob.

It is a model that expands the variety of sounds by fine-tuning the knob and emphasizing the high, mid, and low frequencies of various tones such as noisy dense sounds and intermittent sounds.

From CV IN, you can input CV OUT (sequencer, analogue synth, modular synth) of other equipment and change the MAIN VCO. Since it is a 6.5mm jack, please use a conversion plug when using a 3.5mm cable.

Runs on DC9V negative centre or a 9V battery.

3 sub oscillator effect each other go to main VCO with LEVEL knob.

The main VCO goes to DISTORTION circuit with HI,MID,LO knobs.

The SNB-2b makes a variety of sounds.

CV IN is for VCO pitch. It accepts+-9V voltages.

Notes: This model consists of two VCOs (oscillators), SAMPLE & HOLD, noise generator, low-pass filter, LFO, VCA, and envelope generator to create a powerful sound.

By itself, a wide range of sounds can be created, including random and regular intermittent sounds, mute timing, and fine-tuning of levels.

If you input sounds from other equipment through the A IN, you can apply a variety of filters, LFOs that oscillate the filters, and mutes to the input sounds in parallel with the built-in oscillator.

The variable range is wide enough to produce a variety of sounds. The filter is a 4-pole filter that works very smoothly, and external audio can be input via A IN.

You can also use it with a sequencer to create even more sounds.

CV INPUTs can accept - + 9V. Do not exceed this voltage.

The adapter is not included.

Please use centre negative 9V POWER SUPPLY or A 9V battery.