Synth Accessories

Notes: Introducing the new Buchla Auxiliary Oscillator Card, a brand new revision of the BEMI era AUX Card, designed to perfectly compliment 208c series / Easel instruments.

Buchla Music Easel users remember fondly the BEMI-Era Easel Aux Expander Card, which added an auxiliary modulation source which could also be used as an audio rate oscillator and more!

Now, the Aux Card returns as the Aux Osc Card - A new Auxiliary Oscillator Card which perfectly compliments the current generation Music Easel Modern, Retro, Easel Command, and Anniversary Edition.

The new AUX Card unlocks an incredible range of features, dramatically expanding the Easel's capabilities and taking your creative potential to the next level.

Notes: Voice cards expand the functionality of the Bullfrog and make it even more versatile. Some voice cards replace patch cables - they connect the "modules* of the Bullfrog internally, while others have built-in mixers, signal generators, and advanced electrical circuits to control the synthesizer, for example, the Sequencer sends CV to control pitch and gate to start events on the synthesizer and the Sampler/Looper emulates reel to reel tape recorder functionality.

The Gesture Controller voice card gives a new type of control over the Bullfrog, allowing for it to be played like a Theremin, with some handy extras. The PITCH and VCA/VCF sensors of the Gesture Controller are internally routed to the VCO pitch and VCA level/VCF cutoff parameters of the Bullfrog once connected. The card also features a built-in pitch quantizer that can be turned on or off as desired, an adjustable pitch range for the sensors (1V, 3V or 5V) and another toggle switch for an additional internal connection which allows for sending gates to the Bullfrog's EG's from the VCA/VCF sensor. Besides the internal connections, the card also has separate outputs for PITCH CV and VCA/VCF CV from the sensors that can be patched elsewhere.

Notes: 4 Magnetic bows for the SoMa Laboratory Flux.

Notes: These knobs fit all 1010music products. Replace your damaged knobs or just swap them for a different colour. These knobs will fit blackbox, bluebox, the nanoboxes, bitbox mk1, bitbox mk2, bitbox micro, bluebox Eurorack edition, and Waverazor Dual Oscillator. They are sold in single colour packs of 4.

These are the official knobs used on 1010music products since the release of the bluebox. They fit the stems of the potentiometers on all current and past 1010music products. They come in packs of 4, all one colour.

Each knob is 0.65" / 18 mm high with a base diameter of 0.65" / 18 mm.

Notes: The Chorda Strap Pack includes a premium adjustable shoulder strap and custom-designed strap pegs. Crafted from high-quality seatbelt material and vegan leather, the strap adjusts from 38 to 65 inches, offering the perfect fit for every musician.

The pack also includes two aluminum pegs, allowing you to easily and securely attach this strap - or any other favorite - to your Artiphon Chorda.

Notes: This is a convenient solution for anyone who wants to use the Flux in performance or wants an optimum operating position on stage or in the studio.

Notes: Set of spare sensors for Terra (16x).

Notes: This lightweight soft case has a carrying handle, shoulder strap and a padded interior to protect your Flux. It also contains a compartment for the power supple, cable and any other accessories.

Notes: Offering optimum protection for transporting and storing your Flux synthesiser, this case of coated multiplex, with aluminium edge protection and two butterfly locks. Foam padding inside for protection and multiple accessory compartments contained within.

Notes: This lightweight, durable padded nylon Chorda Carry Case is custom-designed to securely hold your Artiphon Chorda, along with essential accessories like cables, a power supply, and the Chorda Strap Pack.

Featuring a sleek black design with the signature Chorda blueprint, it's not only protective but also a stylish conversation starter. The versatile case offers dual carrying options: carry it by hand or sling it over your shoulder with the included adjustable strap.

With a secure zipper closure, this portable case is perfect for musicians on the go, Keep your Chorda safe and sound wherever your music takes you.

Notes: Soft, black leather wrap with suede lining and embossed logo, handmade in london. The individual holes are cut perfectly to fit each rotary encoder, with hook and loop adjustment to secure it to your OP-XY or OP-1 field.

dimensions: 300 x 115 x 20 mm

Notes: Voice cards expand the functionality of the Bullfrog and make it even more versatile. Some voice cards replace patch cables - they connect the "modules* of the Bullfrog internally, while others have built-in mixers, signal generators, and advanced electrical circuits to control the synthesizer, for example, the Sequencer sends CV to control pitch and gate to start events on the synthesizer and the Sampler/Looper emulates reel to reel tape recorder functionality.

The ADSR voice card adds a full four-stage attack/decay/sustain/release envelope that can be triggered by the Bullfrog's GATE button (or notes played on a connected MIDI keyboard). It is internally routed to the VCA once connected and features a RELEASE CV input, as well as a seperate OUTPUT to get another copy of the ADSR envelope that can be patched elsewhere.

Notes: ***B-STOCK: Box damaged with tears on packaging, but product is in excellent condition and in perfect working order***


The Headliner 3-Tier Desktop Synth Stand was designed to improve your workflow and help you stay organized while fitting more gear on your production desk. It fits three compact devices like synthesizers, controllers, drum machines, and effects modules. The angled design makes it easier to reach knobs and view LCD screens.

The Headliner 3-Tier Desktop Synth Stand is adjustable in width from 7.3" to 11.5" and fits a variety of devices from Roland, Korg, Elektron, and more (partial list below). It is made from solid steel and includes non-slip rubber strips for added stability.

Features
Improve your workflow and stay organized while fitting more gear on your production desk.
Fits three devices such as synthesizers, controllers, drum machines, and effects modules.
Angled stand makes it easier to reach knobs and view LCD screens.
Solid steel construction with non-slip rubber strips keep stand and equipment in place.
Width adjustable from 7.25" to 11.5". Best fits devices from 8" to 14" in width.
The lower tier has a depth of 7". The middle and upper tiers have a depth of 5.25".
Overall dimensions of stand (WxDxH): 7.25"-11.5" x 17" x 17.5".
Includes non-slip rubber strips.

Fits*: Akai Fire, Alesis SR-16, Arturia SparkLE, Behringer Crave, Behringer TD-3, Behringer RD-6, Elektron Digitone, Native Instruments Maschine Mikro MK3, PreSonus ATOM SQ, Akai LPD8, Akai MPX8, Dreadbox Typhon, Korg nanoPAD2, Korg SQ-1, Korg Volca Bass, Korg Volca Beats, Korg Volca Drum, Korg Volca Kick, Korg Volca NuBass, Korg Volca Sample 2, Roland Boutique Series, Roland MC-101, Roland TB-3 Touch Bassline, Roland TR-6S
*Some devices may not fit on all tiers.

Notes: This lightweight soft case has a carrying handle, shoulder strap and inner padding to protect your Lyra-4. Inside is a compartment for your mains adapter, cable and other accessories.

Notes: This lightweight soft case has a carrying handle, shoulder strap and inner padding to protect your Lyra-4s. Inside is a compartment for your mains adapter, cable and other accessories.

Notes: A microphone stand adapter and a neck strap adapter.

Notes: Made from transparent polycarbonate, this protective cover is sturdy, easy to attach and fits perfectly over the Lyra-4.