Studiomonitore

Notes: Loosely inspired by the look of the classic NS10 studio monitors, Yamaha's HS range offers much more modern sound. Punchy low end and clear highs from this 6.5-inch model.

Supplier's notes:
This second generation of 'HS' nearfield reference monitors, like their predecessors, share the same design philosophy as the legendary NS-10M studio monitors - Providing accurate signal reproduction and superior sonic performance.

The Yamaha HS7 employ a new, highly efficient tweeter providing an extended high frequency range up to 30KHz. The matching HS8S 150W powered subwoofer provides an extend bass when a well defined bottom end is required.

A low resonance enclosure built using a three way mitre joint technique ensures that the corners of the speaker are firmly anchored leading to dramatically improved durability and the elimination of unwanted resonances that can colour the original sound. Yamaha's 'Vortex Sound Control' technology is deployed to decrease unwanted airflows around the speaker ports. This in turn reduces audible noise by up to 6dB.

Product video: http://www.youtube.com/watch?feature=player_embedded&v=Dvj3StP4fVE

Notes: Perennial favourite nearfield monitor with a look inspired by the classic NS-10s. Punchy sound with the clarity and accuracy needed for production and mixdowns. Great value.

Supplier's notes:
The Yamaha HS8 is the new flagship model of Yamaha's HS series of active studio monitors, taking its cues from the ever popular and much demanded NS-10.

The Yamaha HS8 Active Studio Monitor features biamplified full range 2 way speakers rated at 75W and 45W and has been developed by Yamaha to offer an exceptionally flat and accurate frequency response for use in music production and composition as well as the home project studio. The HS range of monitors has been designed in the same tradition of the legendary NS10M monitors.

Yamaha HS8 speakers feature a low resonance bass reflex enclosure which improves the rigidity of the overall speaker, and less cabinet resonance means that the signal remains clear and uncoloured. This is very important in getting an accurate mix which translates across all systems.

Port noise has also been audibly reduced by up to 6dB using the new Yamaha proprietary technology right across the HS range, which also helps to deliver a clean and precise signal. The HS8 is equipped with XLR and TRS jack connectors as well as room control and hi trim response controls.

Notes: Small but deeply impressive desktop monitors. Two-way design based around a 4-inch woofer which produces much better bass response than you'd imagine possible for such a compact speaker.

Supplier's notes:
When workspace is at a premium, don't compromise on quality. With the 8020D, Genelec's renowned accuracy and reliability will fit your project and your space.

The Genelec 8020D is small in dimensions, but big in ambition. The 8020D, introduced in 2017, even delivers 4 dB higher SPL and has a lower energy consumption than earlier models of 8020. Designed to suit the broadest possible range of listening environments, 8020D thrives when space is at a premium, and draws on the innovation of the 8000 Series for an unrivalled near-field experience.

Trust in the colour-free, accurate reproduction of the Minimum Diffraction Enclosure (MDE), while relying on the precise on- and off-axis frequency reproduction of the Directivity Control Waveguide (DCW). And when you're finished, Genelec Intelligent Signal Sensing (ISS) circuitry detects when your system is no longer in use, placing it into an environmentally friendly, power-saving standby mode. From post-production studios to OB vans and DAW-based rooms, the 8020D is your near-field solution of choice.

Notes: Make music where you are most creative with portable, wireless studio monitors.

Seamlessly bring your studio sound to your most creative spaces. Portable studio monitors with 20 hours of battery life and reference monitor performance. Precise and neutral sound representation tuned for music creation and critical listening. Enjoy a cable-free set-up where you can quickly reposition to always find yourself in the sweet spot, enabled by ultra-low latency and uncompressed wireless audio. Play music from any device via Bluetooth or cable directly to a mixer, audio interface or other audio source. Built responsibly with 100% recycled plastics, and future-proof designed for easy disassembly and component replacement.

Bring your studio sound with you: Studio monitors designed for portability with 20 hours of battery life, robust design and lightweight build.

Experience reference monitor performance wherever you are: Precise and neutral sound representation with bass extension down to 40Hz, tuned for music creation and critical listening.

Seamless, cable-free set-up: Quickly reposition to always find yourself in the sweet spot, enabled by ultra-low latency and uncompressed wireless audio.

Connect to everything: Play music from any device via Bluetooth or cable directly to a mixer, audio interface or other audio source.

Reduce your environmental impact: Built with 100% recycled plastics, and designed for easy disassembly and component replacement.

Shape UNIT-4s sound to your environment from your phone: Choose from predefined sound profiles or micro-adjust the customisable 5-band EQ with the UNIT-4 mobile app.

Packaging

In the box:
UNIT-4 Wireless+ (2 pcs)
UNIT-4 Power Supply (2 pcs)
UNIT-4 Protective Pouch (2 pcs)
X02 W+ Link transmitter (1 pcs)

Items per master: 1
Packaging weight (g): 8200
Packaging width (mm): 332.5
Packaging height (mm): 331
Packaging depth (mm): 205
Product weight (g): 6144
Product width (mm): 156
Product height (mm): 258
Product depth (mm): 114

Specifications

Frequency range: 40Hz to 40kHz (-10dB)
Frequency response: 50Hz to 20kHz (+/-2dB)
W+ Link audio quality: Uncompressed 44.1kHz 16-bit
W+ Link operating range (m): 12
W+ Link latency (ms): 16
Bluetooth codec: SBC, AAC
Bluetooth version: 5.2
Bluetooth profiles: A2DP 1.3, AVRCP 1.6
Charging time (hours): 2
Peak SPL (dBSPL): 105
Self generated noise: <20dB
THD: <1% nominal, <10% peak output
Power supply: ACDC Converter, 120/240V to 20VDC 120W
Playback time on battery (hours): 20
Battery capacity (Wh): 77
Enclosure type: 2-way bass reflex
Woofer: 4-inch high excursion paper cone woofer
Tweeter: 1-inch silk dome tweeter
Amplifier power: 2 x 30W continuous, 2 x 80W peak
Amplifier type: Class D
DSP: Loudness adaptive bass boost
Crossover frequency (kHz): 3
EQ adjustment: 5-band adjustable EQ via AIAIAI app
Analogue inputs: 3.5mm mini-jack + 6.3mm TRS balanced
Grill material: Steel

Responsible design

Main material: 100% recycled plastics, post-consumer
Packaging material: 100% recycled paper and cardboard, FSC certified
Protective pouch material: 100% compostable fabrics
Design for disassembly: Yes
Glue-free design: Yes
Right to repair compliant: Yes
Repair parts available: Yes
Repair guides available: Yes

Notes: The iLoud Micro Monitor Pro delivers sound much bigger than its looks suggest. Sold here as a single monitor, also available as a stereo pair with room correction mic. Seriously impressive performance from a tiny package.

Supplier's Notes:
Check manufacturer's website for relevant content!

Unparalleled sound quality wherever you want

The original iLoud Micro Monitor revolutionized the way professionals and audio enthusiasts experience sound in an ultra-portable and compact form factor. It became renowned for its exceptional sound quality and portability, making it a popular choice as an audio reference monitor for both pro-studios, home-recording artists, and mobile setups. Now the iLoud Micro Monitor PRO takes the incredible qualities of the classic Micro Monitor to a new level blending together studio-quality reference audio and a compact form factor, along with a new built-in state-of-the-art speaker correction technology, to deliver unparalleled sound quality wherever you want.

Precise and balanced audio reproduction across the whole frequency spectrum

The Micro Monitor PRO features a bi-amped design with a 3" paper woofer and a 0.75" textile dome tweeter, delivering precise and balanced audio reproduction across the frequency spectrum. This enables you to experience crystal-clear highs, rich midrange, and tight, defined bass that rival larger studio monitors.

Thanks to the new built-in state-of-the-art speaker correction technology, the Micro Monitor PRO provides accurate audio reproduction and a balanced and precise soundstage, regardless of the ambience, ensuring high-quality sound wherever you are.
With XLR and RCA line inputs, the Micro Monitor PRO seamlessly integrates into professional audio environments and consumer systems alike, making it suitable for on-the-go setups as well.

Quick and easy setup and room correction

The flip foot design allows for quick and easy setup of the speaker position to achieve the perfect sweet spot, whether you're in a studio, home office, or on the go. It provides optimal positioning and angling for your listening experience.

The internal power supply eliminates the need for external adapters, streamlining your setup.

With its compact size and lightweight design, the iLoud Micro Monitor Pro is the perfect companion for any environment, delivering unparalleled sound quality wherever you want it.

A full-blown studio at home or on-the-go

The iLoud Micro Monitor PRO comes with various free bonus contents.

Registering your iLoud Micro Monitor PRO unlocks powerful software tools, as well as exclusive discounts on other IK products.

Best in class audio reference for studio, home and on-the-go setups

Type: 2-Way bi-amped, digitally controlled compact studio monitor
LF driver: 3" composite cellulose fiber, custom-made mid-woofer
HF driver: 1" low-distortion silk-dome tweeter
Acoustic design: DSP-tuned bass reflex
Number of amps per speaker: 2
Amplifier type: High-efficiency Class-D
Total power: 50 W RMS
LF power: 30 W RMS
HF power: 20 W RMS
Crossover type: Digital, Linear Phase
Crossover frequency: 2.5 kHz
Frequency response: 50 Hz to 20 kHz i 2dB, 42 Hz to 22 kHz @ -10dB
Phase response: System remains coherent within +/- 30- from 500 Hz to 20 kHz
Sensitivity: -10 dBu signal generates 90 dB SPL @ 1 m
Continuous max SPL: 94 dB
Peak SPL: 107.3 dB
Peak SPL: 109.3 dB
Placement setup: Manual switches for LF Extension, LF trim, HF trim, Desk position

Fully automatic built-in digital calibration, and compatible with X-Monitor control software

LF extension switch: Sets -3 dB point of the frequency response at 50 or 80 Hz (LFE)
LF switch: Low shelf, +2 dB or -3 dB from 100 Hz down
HF switch: High shelf, +2 dB or -3 dB from 8 kHz up
Desk switch: -3 dB at 250 Hz and +4 dB at 1.2 kHz
Calibration: Fully automatic and built-in digital calibration
Full DSP control
Compatible with X-MONITOR macOS and Windows control software
Total Latency (TOF): 3.00 ms
Totally DSP controlled
1 x XLR balanced input, 1 x RCA unbalanced input, 1 x USB type-C, C8 power socket
Flip foot for quick and comfortable desktop setup
Internal PSU - 90 to 240 V AC, auto-ranging, 50 or 60 Hz, 1 A max
MIC input for ARC from XLR connector

Dimensions

Size: 208 mm/8.18" x 105 mm/4.13" x 153 mm/6.02"
Weight: 1.37 kg/3.02 lb (each)

Notes: PreSonus showcase their expertise with these painstakingly crafted monitors. Coaxial design offers all the benefits of a point source, for precise stereo imagine and phase alignment.

Supplier's Notes:
Listen to your mixes reproduced with lifelike realism! The Erisr Pro 8's symmetric design and consistent acoustic centre provides superior phase alignment between components to deliver a wide sweet spot, precise stereo imaging, and symmetrical dispersion patterns, making them ideally suited for immersive Dolby Atmos rooms and stereo mix environments alike.

The Eris Pro 8's coaxial design provides a single acoustic point source that creates a natural listening experience, revealing the subtlest nuances in your recordings, while providing a three-dimensional soundstage, detailed transient response, and lifelike sonic reproduction. Combined with a punchy low-end that defies its compact size, the Eris Pro 8 provides a superior listening experience for both home studios and professional mix rooms.

A 1.25-inch, ultra-low mass, silk-dome tweeter ensures snappy, accurate transient reproduction, while a 8-inch, woven-composite woofer offers tight, clear bass, with plenty of punch and no flab. A ported enclosure and 140 watts of power allows the Eris Pro 8 to reach down to an astonishing 35 Hz, while a finely detailed transient response and stunning dynamics deliver a natural and less fatiguing experience.

Acoustic tuning controls and a three-way Acoustic Space tuning lets you accurately configure the Eris Pro 8 for your room. Flexible input options enable connection to almost any line-level source, from mixers to audio interfaces and more. Provisions for wall and ceiling mounts make it easy to integrate Eris Pro 8 monitors into any stereo or multi-channel system.

Features

Single point-source coaxial design for wider sweet spot and better phase alignment
8-inch, woven-composite, low-frequency driver
1.25-inch, silk-dome, high-frequency driver
140W, Class AB amplification
35 Hz to 20 kHz frequency response
105 dB SPL (Peak, @ 1 meter
Acoustic Tuning Controls: Acoustic Space (Flat, -2 dB, -4 dB), High Frequency (+/-6 dB, center 10 kHz, continuously variable), Mid Frequency (+/-6 dB, center 1 kHz, continuously variable), Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)
XLR and 14-inch TRS balanced and RCA unbalanced rear-panel stereo inputs
Protection: RF interference, output-current limiting, over-temperature, turn-on/off transient, subsonic filter
Power Saver mode (engages after 40 minutes)
Wall and ceiling mountable

Inspired design for inspiring results

Placing the high-frequency driver in the centre of the low-frequency driver increases clarity, widens stereo imaging, and produces an incredibly even mid-range. Vocal clarity, the attack of a snare, and guitar presence shine through, allowing you to quickly and accurately place them in a mix and get the results you desire faster than ever before.

Symmetric response

The Eris Pro 8's coaxial design provide a symmetrical dispersion resulting in a crisper stereo image, greater soundstage depth, and superior separation between components in a complex mix.

Set up your studio monitors for your room

Acoustic Tuning controls ensure you'll get the flattest frequency response possible in your mix environment. You get Low Cut, Mid, and High controls, as well as 3-way Acoustic Space tuning that allows you to easily compensate for the sonic consequences of speaker placement against a wall or in a corner.

Specs

Electronics

Voltage: 220-240V UK
Wattage: 140 Watts
INPUT IMPEDANCE
Input impedance: 10KO

Performance
Peak SPL: 108 dB (@ 1 Meter)

Speakers
Crossover frequency: 3.1 kHz

Hardware
Cabinet material: Vinyl-Laminated, Medium-Density Fiberboard

Audio controls: Volume High Frequency (+/-6 dB, center 10 kHz, continuously variable) Mid Frequency (+/-6 dB, center 1 kHz, continuously variable)

Audio switches

Acoustic Space (Flat, -2 dB, -4 dB) Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)

Monitor inputs: 1- Balanced XLR, 1- Balanced 14" TRS, 1- Unbalanced RCA

Power amplifier type: Class AB

Measurements

Dimensions: 12.80 x 10.60 x 12.20 in

Depth: 12.2" (30.1 cm)
Height: 12.82" (32.6 cm)
Width: 10.63" (27 cm)

Notes: Class-leading performance from Genelec's compact monitors, packing huge power into a small footprint. 32 Hz - 25 kHz frequency response and 110 dB maximum SPL for true professional sound in a tiny package.

Supplier's Notes:
Nearfield monitoring with real muscle. The 8050B has power in abundance, making it ideally suited to larger spaces and longer listening distances.

Detail and transparency

The 8050B represents a class-leading balance of extraordinary SPL output, expansive dynamic range and an intensely detailed, transparent performance. With superb directivity and a wide sweet spot, you're free to move position and still trust what you're hearing.

Mixes that translate

With its neutral performance and ability to adapt to your room via simple rear-panel room compensation switches, the 8050B ensures a flat playback response to help you really analyse the spectral balance of a recording and produce mixes that always translate reliably.

Package contains:
1 x 8050B monitor
1 x mains cable 1,8 m
1 x operating manual

8050B Technical Specifications

SPL:
110 dB

Amplifier Power:
150 W Bass (Class AB) + 120 W Treble (Class AB)


Frequency Response:
32 Hz - 25 kHz ("-6 dB")

Accuracy of Frequency Response
+/- 2 dB (38 Hz - 20 kHz)

Driver Dimensions
o 205 mm Bass + o 25 mm Treble

Dimensions:
H 452 x W 286 x D 278 mm, with Iso-Pod (view in inches)

Weight:
14.4 kg / 31.7 lb

Connections:
1 x XLR Analog Input

Notes: Iconic Genelec sound quality in a classic nearfield format, the 8050B offers 32 Hz - 25 kHz response (-6 dB), 110 dB max SPL and exceptional accuracy. Modern classics for good reason.

Supplier's Notes:
Class-leading performance from Genelec's compact monitors, packing huge power into a small footprint. 32 Hz - 25 kHz frequency response and 110 dB maximum SPL for true professional sound in a tiny package.

Nearfield monitoring with real muscle. The 8050B has power in abundance, making it ideally suited to larger spaces and longer listening distances.

The 8050B represents a class-leading balance of extraordinary SPL output, expansive dynamic range and an intensely detailed, transparent performance. With superb directivity and a wide sweet spot, you're free to move position and still trust what you're hearing.

With its neutral performance and ability to adapt to your room via simple rear-panel room compensation switches, the 8050B ensures a flat playback response to help you really analyse the spectral balance of a recording and produce mixes that always translate reliably.

Notes: White version of the iLoud Micro Pro packs a serious punch for its size. Less than 21 cm tall but offering frequency response all the way down to 50 Hz, these might be the ideal monitors for those short on space.

Supplier's Notes:
The iLoud Micro Monitor Pro delivers sound much bigger than its looks suggest. Sold here as a single monitor, also available as a stereo pair with room correction mic. Seriously impressive performance from a tiny package.

Supplier's Notes:

Unparalleled sound quality wherever you want

The original iLoud Micro Monitor revolutionized the way professionals and audio enthusiasts experience sound in an ultra-portable and compact form factor. It became renowned for its exceptional sound quality and portability, making it a popular choice as an audio reference monitor for both pro-studios, home-recording artists, and mobile setups. Now the iLoud Micro Monitor PRO takes the incredible qualities of the classic Micro Monitor to a new level blending together studio-quality reference audio and a compact form factor, along with a new built-in state-of-the-art speaker correction technology, to deliver unparalleled sound quality wherever you want.

Precise and balanced audio reproduction across the whole frequency spectrum

The Micro Monitor PRO features a bi-amped design with a 3" paper woofer and a 0.75" textile dome tweeter, delivering precise and balanced audio reproduction across the frequency spectrum. This enables you to experience crystal-clear highs, rich midrange, and tight, defined bass that rival larger studio monitors.

Thanks to the new built-in state-of-the-art speaker correction technology, the Micro Monitor PRO provides accurate audio reproduction and a balanced and precise soundstage, regardless of the ambience, ensuring high-quality sound wherever you are.
With XLR and RCA line inputs, the Micro Monitor PRO seamlessly integrates into professional audio environments and consumer systems alike, making it suitable for on-the-go setups as well.

Quick and easy setup and room correction

The flip foot design allows for quick and easy setup of the speaker position to achieve the perfect sweet spot, whether you're in a studio, home office, or on the go. It provides optimal positioning and angling for your listening experience.

The internal power supply eliminates the need for external adapters, streamlining your setup.

With its compact size and lightweight design, the iLoud Micro Monitor Pro is the perfect companion for any environment, delivering unparalleled sound quality wherever you want it.

A full-blown studio at home or on-the-go

The iLoud Micro Monitor PRO comes with various free bonus contents.

Registering your iLoud Micro Monitor PRO unlocks powerful software tools, as well as exclusive discounts on other IK products.

Best in class audio reference for studio, home and on-the-go setups

Type: 2-Way bi-amped, digitally controlled compact studio monitor
LF driver: 3" composite cellulose fiber, custom-made mid-woofer
HF driver: 1" low-distortion silk-dome tweeter
Acoustic design: DSP-tuned bass reflex
Number of amps per speaker: 2
Amplifier type: High-efficiency Class-D
Total power: 50 W RMS
LF power: 30 W RMS
HF power: 20 W RMS
Crossover type: Digital, Linear Phase
Crossover frequency: 2.5 kHz
Frequency response: 50 Hz to 20 kHz i 2dB, 42 Hz to 22 kHz @ -10dB
Phase response: System remains coherent within +/- 30- from 500 Hz to 20 kHz
Sensitivity: -10 dBu signal generates 90 dB SPL @ 1 m
Continuous max SPL: 94 dB
Peak SPL: 107.3 dB
Peak SPL: 109.3 dB
Placement setup: Manual switches for LF Extension, LF trim, HF trim, Desk position

Fully automatic built-in digital calibration, and compatible with X-Monitor control software

LF extension switch: Sets -3 dB point of the frequency response at 50 or 80 Hz (LFE)
LF switch: Low shelf, +2 dB or -3 dB from 100 Hz down
HF switch: High shelf, +2 dB or -3 dB from 8 kHz up
Desk switch: -3 dB at 250 Hz and +4 dB at 1.2 kHz
Calibration: Fully automatic and built-in digital calibration
Full DSP control
Compatible with X-MONITOR macOS and Windows control software
Total Latency (TOF): 3.00 ms
Totally DSP controlled
1 x XLR balanced input, 1 x RCA unbalanced input, 1 x USB type-C, C8 power socket
Flip foot for quick and comfortable desktop setup
Internal PSU - 90 to 240 V AC, auto-ranging, 50 or 60 Hz, 1 A max
MIC input for ARC from XLR connector

Dimensions

Size: 208 mm/8.18" x 105 mm/4.13" x 153 mm/6.02"
Weight: 1.37 kg/3.02 lb (each)

Notes: The Genelec 8040BMM studio monitor is a major upgrade from their 8040A model, adding ISS power management to an already amazing nearfield monitor. Boasting performance comparable to much larger systems, but in a compact package, the bi-amplified Genelec 8040BMM is ideal for use in many situations where a wide frequency response is needed but space is limited. Whether you're building your project studio, outfitting your mobile rig, or upgrading your editing suite, you're going to be glad you chose the Genelec 8040BMM studio monitors.

The 8040BMM features Genelec's MDE (Minimum Diffraction Enclosure) with rounded edges and gently curved front and sides. This allows the 8040BMM to achieve a very smooth frequency response and superb imaging qualities with minimised cabinet edge diffraction.

Like all Genelec 8000 Series monitors, the 8040BMM also features the advanced Genelec DCW (Directivity Control Waveguide). The revolutionary DCW has been further enhanced to provide extremely accurate control of the 8040BMM's directivity. Genelec designed this specially shaped, very smooth surface and integrated it with the enclosure. Its area has been maximised to achieve an astoundingly flat on and off axis frequency response. As a result, the 8040BMM has an astoundingly wide, flat frequency response both on and off axis. This also gives the 8040BMM superb imaging qualities and reduces listening fatigue.

To increase the 8040BMM woofer's low frequency extension and SPL capacity, Genelec designed an ingenious flow optimised reflex port. The long, curved tube maximises airflow, so the 8040BMM can reproduce deep bass without compression. The tube terminates with a wide flare, minimising port noises and providing excellent bass articulation. An optimised die cast aluminium structure with extremely durable semi matte finish and acoustically optimised metal grilles add to the 8040BMM's acoustic excellence.

Genelec's low distortion drivers (6.5" bass speakers and 3/4" metal dome tweeters) are driven by the 8040BMM's dedicated 90 watt bass and treble amplifiers after sophisticated filtering. Magnetic shielding, overload protection circuitry, and versatile room response controls are standard.

Thanks to Genelec's ISS (Intelligent Signal Sensing) power management system, you never have to remember to shut down your 8040BMM monitors again. ISS constantly checks for input signal. After a while, if ISS doesn't detect anything, it switches your 8040BMM over to a low power sleep state, safeguarding your gear and sparing you the wasted electricity.

The versatile mounting features on the 8040BMM include integrated rear support points for wall and floor stands plus a further M10 thread for mounting on the cabinet base. In addition, every Genelec 8040BMM monitor comes with a standard IsoPod (Isolation Positioner/Decoupler). The IsoPod is a clever mounting stand, which allows the 8040BMM to perform in either the vertical or horizontal position. The IsoPod also enables the acoustic axis of the monitor to be aimed at the listener while acoustically and mechanically decoupling the monitor from the surface it is resting on.