All genres charts

Notes: Classic closed-back headphones in a low-impedance version designed to play nicely with outputs on phones, laptops and interfaces. One of the best all-round options for production.

Supplier's notes:
The Beyerdynamic DT 770 Headphones 80 Ohm are closed back dynamic headphones that use the same comfortable, sound isolating design as the 250 Ohm studio version, but with a lower resistance for general purpose and mobile applications. Because of the lower resistance, the DT 770 Pro 80 Ohm headphones are louder and work on low power devices such as smart phones, MP3 player, laptops and bus powered interfaces. Therefore, if you are working in a loud environment or using a battery operated device, the Beyerdynamic DT 770Pro 80 Ohm headphones make the perfect choice of headphone.

When out and about, you really need to block as much ambient noise out as possible and a lot of headphones do this by clamping the ear-pads as tightly to your ears as possible and using materials that absorb a lot of sound. This produces two unwanted issues; discomfort, after prolonged use; and a loss of audio quality as sound being generated by the driver is absorbed by the cup. The DT 700 Pro series avoids this by using a clever bass reflex system and a large circumaural cup design with velour pads. Of course the real technology is in the transducer itself, which produces a nominal frequency response of 5Hz to 35kHz and a nominal SPL of 96dB, an exceptional performance.

Notes: PRO Expanders:

Extra Pam Outputs.

ALM034-EX

PPEXP1 & PPEXP2 are two expander modules for Pamela's PRO Workout that both offer additional dedicated fixed clock, Din Sync & MIDI clock outputs.

Extend Pam as a master to clock external gear with super solid dedicated MIDI & Din Sync clock outputs. The Din Sync clock (x24) and Run outputs can also be patched into a 2nd Pam to easily sync it.

Use the extra fixed clocked gate outputs to free up Pam's main outputs for unique sequencing or complex modulation duties.

Connects directly to and is powered by the 'MIDI-EX' expander header on rear of Pamela's PRO Workout.

Only a single output expander is supported at any time but either can be used alongside an AXON-1 CV input expander.

A MIDI adapter cable and a Din Sync adapter cable are both available for connecting to 5 pin 'Din' type connectors. The PPEXP 1 includes a MIDI Din adapter cable.

Technical Specifications

Power: Additional approx +12V 40mA (PPEXP1) / 20mA (PPEXP2)
Size: 4HP & 2HP
Depth: 32mm

Notes: FONT is a massive sounding liquid filter- designed to bring you powerful basslines, tons of FM modulation and a clean resonance over your audio path.

It features two simultaneous outputs:
2-pole Low Pass
2-pole Band Pass

It can also work as a sine oscillator, tracking 1V/OCT when the resonance is at its maximum level.

FONT can be used to make basslines, acid patterns thanks to its organic and musically sounding resonance.

Ping it to produce percussion sounds such as, bongos, congas or toms.

Applying a pitch envelope, it really shines as a kick-drum machine!

22 mA +12V
25 mA -12V
0 mA 5V
15 mm deep
O 4.60 (10 Votes) Average Rating

Notes: This small utility is the pedal's lover best friend, it allows 2 diferent chains of pedals to be independently connected to your synth.

The Send channels attenuate the synth level to instrument level.

The Return channels amplify the signal from instrument to synth level.

Specs:
- Width: 4 HP
- Depth: 3 cm
- Max current: 10mA

Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod26 is 26HP with 1.34" (34mm) of available module depth. The built-in power supply has two power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod26 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.

Notes: MMF is an analogue, multimode filter with a 12dB per octave slope. Its sonic character swings all the way from classic low pass to squelchy acid lines. Simultaneous outputs of low pass, high pass, and band pass filter types are provided allowing for many variations of the input signal. Whether you're looking for smooth and creamy, or resonant and wild, MMF can go there.

Notes: The Whammy Ricochet lets you bounce your playing up or down in pitch in controlled or crazy shifts. A momentary switch and customizable independent rise and fall time ballistics, allow you to get the Whammy action you know and love without the use of a treadle. Just hold your foot on the footswitch and let the Ricochet do the rest. Seven pitch selections - 2nd, 4th, 5th, 7th, Octave, Double Octave, and Octave+Dry, as well as a toggle to select up or down for the selected pitch. The Whammy Ricochet also has latching footswitch mode so you can rise or fall to pitch and stay there, and an LED ladder that shows your shift trajectory at all times. All these controls combine to create classic Whammy pitch-shifting as well as new sounds never heard before.

General Specifications
ControlsBallistics Control, Pitch Control, Range Switch, Momentary Switch, Effect On/Off
Sample Rate44.1 kHz in classic mode, 22 kHz in chords mode
Frequency Response20 Hz-16 kHz (classic mode), 20 Hz-11 kHz (chords mode)
Signal to Noise Ratio> -106dB (A weighted); ref = max level, 22 kHz bandwidth
A/D/A Converter24-bit
THD0.004% @ 1 kHz; ref = 1 dBu w/ unity gain
Power Consumption2.1 Watts (235 mA typical @ 9 VDC)
Power Requirements9 VDC External Adapter (sold separately)
Power SupplyPS0913DC-01 (US, JA, EU); PS0913DC-02 (AU, UK)
Power Adapter Output9 VDC 1.3 A
Dimensions
Length4.75"
Width2.875"
Height1.75"
Weight0.8 lbs.
Audio Output
Output1/4" Unbalanced (Tip-Sleeve)
Max Output Level+10 dBu
Output Impedance1 kO (Effect enabled or effect bypassed w/ Momentary switch on) True Bypass (Effect bypassed w/ Momentary switch off)
Audio Input
Input1/4" Unbalanced (Tip-Sleeve)
Max Input Level+5 dBu
Input Impedance1 MO (Effect enabled or effect bypassed w/ Momentary switch on) True Bypass (Effect bypassed w/ Momentary switch off)

Notes: A standalone instrument to get you into the world of analogue synthesis. Hand-built, simple to use and capable of some excellent drones and tones. Just add headphones.

Supplier's Notes:
OVUM is where you start: a standalone all-analogue tool for exploratory sound synthesis - all you need to start creating is headphones.

OVUM is designed for exploring pure tones, drones, and microtonal sound textures. Five independently controlled triangle-core oscillators give you five lush voices to layer and evolve. Each voice has a separate control for volume, pitch, and tone, and can be switched between a bright square wave and a crisp triangle wave.

OVUM is hand-built from 100% analogue circuitry, with no digital components, screens, quantization, or key-combinations to memorize - everything is immediate and at your fingertips.

OVUM is enclosed in a beautiful and sturdy wood and aluminum case that feels as good in your hands as it looks on your tabletop.

OVUM has a USB-C port for power, and a single 3.5mm audio output jack for headphones or line-out to connect to an amplifier, audio interface, or effects.

To reduce waste, by default OVUM comes with just the instrument and a USB to USB-C power cable. If you don't have a spare USB power supply, they can be added to your purchase at checkout. OVUM is portable, but does not contain a battery. It can be powered by any USB powerbank.

Notes: Module A-101-8 is a 8-stage phase shifter which uses light-sensitive resistors (LDR) and is a replica of the Compact Phasing A manufactured by the company Schulte in the seventies. The actual phasing circuit is identical to the historic model. Only the illumination control of the LDRs is different: the A-101-8 uses LEDs to illuminate the LDRs, the historic model used incandescent miniature lamps. And the A-101-8 has no built-in LFO but can be controlled by any external control voltage source (e.g. LFO, ADSR, random, Theremin, ribbon controller, sequencer, midi). The phasing offset (i.e. the base value for the phase shifting) and the modulation depth of the external control signal can be adjusted separately. The Compact Phasing A had no offset control but only a depth control for the built-in LFO. Feedback and mixing ratio of the output signal are set by two controls. The audio input is equipped with an attenuator. The module has two audio outputs available (same as the historic model) and a visual display of the phase shifting.

The module has these controls and in/outputs available:

Control Man. : manual control of the phase shift offset (base value)

Control CV: attenuator for the signal applied to the CV socket

Control Feedb.: Feedback or Resonance (similar function as filter resonance/feedback/emphasis)

Control Mix: sets the mixing ratio between original and phase shift signal appearing at output 1

fully CCW: only the modified input signal appears at output 1 (see note below *)

center: a mixture between the modified input signal and the phase shift signal appears at output 1, that's the standard position for the classical phasing effect

fully CW: the pure phase shifted signal appears at output 1 (e.g. for vibrato effects)

Control Input Level: attenuator for signal applied to the In socket

Socket In: audio input

Socket CV: control voltage input

Socket Out 1: audio output 1 (mix signal)

Socket Out 2: audio output 2 (modified input signal)

LED: visual control of the phase shift

The module has some peculiarities (same as the historic model):

The input signal is processed at first by a pre-stage which outputs a "modified" input signal (*). This signal is not processed by the phase shift stages but is affected by the feedback setting. Only when feedback is set to zero this signal is identical to the input signal. Otherwise it contains feedback components.

This signal is output on socket Out 2.

When both output sockets Out 1 and Out 2 are used as stereo channels one obtains a spatial stereo sound effect.

The same signals is also used for the CCW position of the mix control. With mix control fully CCW the unmodified signal appears only if the feedback control is set to zero. Otherwise it contains feedback components.

The historic model had two audio inputs: one 5-pin DIN socket and a 1/4" jack socket. The DIN socket was intended for high-level line signals. When the 1/4" jack socket was used the amplification of the pre-stage increased by about 100. The 1/4" jack socket was intended for low level signals (e.g. electric guitars or microphones). For this feature the A-101-8 has an internal jumper that can be used to increase the amplification. As long as the module is used within the A-100 system usually the lower amplification is used to avoid distortion.

The 8 photo resistors and LEDs are assembled within an small lighproof box. In addition the pc boards are made of lighproof black material to avoid interfering light from other modules or the bus board.

Dimensions
4 HP
45 mm deep

Current Draw
30 mA +12V
30 mA -12V

Notes: The Looper X2 is the culmination of over a decade of experience developing easy-to-use standalone and combination pedals. The Looper X2 supercharges practice sessions as well as live performances by empowering the player to start jamming as soon as possible.

The Looper X2 is a dual-footswitch operated looper pedal aimed at providing fast loop creation with no shortage of space to save your favorite tracks and samples. With 11 song banks, each bank featuring 7 save slots, the Looper X2 provides a total of 300 minutes recording time (2.5 mins per slot in bank 1-9, 10 min each in bank 10, 11). Each slot also corresponds to common song structures as to make organizing sections and tracks easier, as indicated on the front of the pedal. Save slots and recorded tracks can also be managed using the specialized editor software that can be downloaded for free, and compatible with Mac and Windows PCs.

Additional features of the Looper X2 include a FADE knob for controlling and toggling the Fade out function for each loop. Users can also toggle an Auto Rec function to start recording a loop every time a guitar signal input is detected by employing the THRESHOLD knob. Additional knobs include separate volume level controls for Recording and Playback, as well as an 11-option knob for scrolling through the song banks. The dual footswitch setup offers familiar Looper controls and for users desiring more control, the Looper X2 also supports an external footswitch that can perform a variety of operations like cycling through different parts of the current selected song bank. See the manual for more information on compatibility.

The Looper X2, like with other X2 devices, includes Stereo I/O and a 14" External Control out for connecting a footswitch as well as True Bypass to stay quiet when not in use.

Specifications:

Input: 2*1/4" mono audio input jack (impedance value 1Mohm)
Output: 2*1/4" mono audio output jack (impedance value 510ohm)
Num. of saving slot: 77
Recording capacity: Approximate 300 minutes (stereo)
Sample rate/sample depth: 44.1kHz/24bit
Import audio file format: MP3/WAV/FLAC/APE
Export audio file format: WAV
Power requirements: 9V 300mA, center negative (Original power supply is recommended, to avoid unexpected noise)
Dimension: 75mm(D) * 115mm(W) * 33mm(H)
Accessories: Power supply, USB-C to USB-A cable, Quick Guide, LOGO Sticker

Notes: Hizumitas was designed for the one and only Wata from the legendary experimental band Boris, one of the heaviest bands ever to come out of Japan. The trio of guitar sorceress Wata, drummer and vocalist Atsuo, and double-neck bassist, guitarist and vocalist Takeshi has almost 100 releases filled with genre and brain-melting music.

In their nearly three decades together, Boris has infused doom, hardcore, thrash, noise-core, ambient, free improv, drone, psychedelia, and more into their extensive discography. Boris is also known for their unique collaborations with mutually adventurous artists, including American Doom mongers Sunn O))), noise legends Merzbow, Keiji Haino, and Ian Astbury of The Cult.

Wata, always seen and heard on stage wielding her black Les Paul Custom, mixes killer riffs with searing, fluid, or jaggedly melodic leads and controlled walls of feedback, often with help from an EBow. It's a connection of chaos and melody that has enchanted Boris fans worldwide and influenced many bands that have followed in their considerable wake. Simply stated, no other band sounds like Boris, and no other guitarist rocks like Wata.

But with EQD's Hizumitas fuzz on your pedalboard, you can carve out your own singular, mega-heavy tone.

Hizumitas is a faithful recreation of Wata's go-to distortion pedal, the Elk BM Sustainar. The Elk is a Japanese variant of the very well-known "Triangle" BMP. The designers at EQD tried several vintage BMP's during development, found that each pedal was wildly different and realized that to truly capture the magic they needed the original. Wata graciously sent her beloved pedal halfway around the world, and EQD discovered that it had something special the others didn't have: heavy saturation with a gritty edge and massive bottom while maintaining a clear and dynamic tone with enough mids and top end to cut through any sludge. The studious wizards at EQD have built all of those characteristics into the Hizumitas.

Notes: Your USB device is plugged into the MIDI USB Host mk3 instead of into a computer. It provides MIDI In & Out sockets for USB MIDI keyboards and controllers which have only a USB B type socket. For example, used with a USB-Solo, it allows the USB-Solo to be used in a standard MIDI setup, just like a Pro-Solo. It has a USB Host port (USB A type socket), a MIDI In and a MIDI Out (both 5 pin DIN).

The MIDI USB Host mk3 now has additional features. In addition to the standard operating mode, there are now two further modes.

Standard mode (LED Green):
MIDI data received at the MIDI In socket is sent to the USB device and MID data from the USB device is sent to the MIDI Out socket.

Merge 1 mode (LED Amber):
MIDI IN does not go to USB device but instead is merged with MIDI data coming from the USB device which is then sent to the MIDI Out socket.

Merge 2 mode (LED Red):
MIDI IN data is sent to the USB device & is also merged with MIDI data from the USB device which is then sent to the MIDI Out socket.

The modes are selected sequentially by pressing the recessed push button - the LED colour indicating which mode is current.

The attached USB MIDI device MUST be 'Class Compliant'.

The MIDI USB HOST is powered by a regulated 5V mains adaptor (supplied), and can supply up to 1 Amp of buss power to the attached USB device. This product is supplied with a multi-region power supply suitable for use in most countries.

Attractively finished in brushed aluminium with black screen print

Dimensions: 110mm x 55mm x 32mm

Connecting
You can connect one "Class Compliant" USB device directly into the MIDI USB Host. If your host has the latest firmware already installed then you can plug in a powered USB hub and up to four USB devices can then be connected. Earlier MIDI USB Host mkIIs can be updated with a free download which is available from the support section of our website. Serial numbers N6-2421 already have the hub compatible firmware. Serial numbers N3-0541and upward can be updated.

It is recommended that you attach your USB device to the MIDI USB Host before applying power. Then plug-in and power the power adaptor. The active LED should be lit up. If you apply power with nothing plugged into the MIDI USB Host, the Active LED will flash steadily; this is to indicate that it is waiting for a suitable device to be attached. If it is still flashing when you have attached your device, then it is possible that your device is not class compliant, however you could try turning off the power and start again.

Some USB MIDI devices have two modes of operation and can be set to operate in Class Compliant mode even if this is not the default. The Class Compliant mode might be called "generic driver", the other mode may be called something like "advanced driver". Consult the device manual to see if the mode can be set for Class Compliant.

If you unplug then re-plug the USB cable while it is powered the device might reconnect, but it is not certain.

Power

It is essential to use only the supplied 5V regulated power adaptor. Applying a voltage higher than 5V to the MIDI USB Host will probably not damage the MIDI USB Host itself, but it could damage any attached USB device as the 5V is passed on to the attached USB device for buss power. There is protection circuitry inside the MIDI USB Host to protect against reverse polarity and over-voltage, but these should be treated as a last resort and are not guaranteed to prevent damage to an attached USB device in the event of over-voltage as the USB buss voltage could rise to 6.5V before being clamped.

Care should be taken to ensure that power adaptors for other pieces of equipment are not accidentally plugged into the MIDI USB Host.

If the input voltage rises above 6.5 volts then power will be shut off. The LED will go out and the unit will not operate again until power has been removed for at least 60 seconds. This allows time for the thermal fuse to reset.

The following Yamaha keyboards ar known to be class compliant and therefore should work OK:

PSR-E353, PSR-E443
PSR-S670, PSR-S770, PSR-S970, PSR-A3000, TYROS-5
NP-12, NP-32
DGX-650, DGX-660
P-105, P-115, P-255

The following keyboards are known to incorporate a USB hub and therefore will only work with firmware v2005 or later (s/n N6-2421 and above) for the MIDI USB Host:

Korg Microkey 61
Korg Microkey 49
Korg Microkey 37

Power: 90mA, USB mini-B socket - leaving 910 mA available for the attached USB device
Dimensions: 110 x 55 x 32 mm
Weight: 100g (excluding power supply)
MIDI: 1x IN, 1x OUT - both 5 pin DIN
Power Supply: 5V DC / 1 Amp regulated - (never use an unregulated supply as unregulated supplies typically give a higher output voltage than shown).

This product is supplied with a multi-region power supply which is suitable for use in the UK, EU, US/Canada and AUS/NZ.

Notes: Celebrating the classic, shimmering flanger sounds of Andy Summers, the EHX Walking on the Moon is a tribute to the tones Andy employed while carving his niche in the early days of playing with the Police. Liquid flange effects that hint toward chorus with extra depth and nuance make Andy's sound one of the most coveted in all of the guitar universe.

"This beautiful shimmering which sort of made the sound more bigger and more glamourous - became a sort of characteristic of my guitar sound - A big part of my guitar sound at that time in The Police was the flange sound which we have here today in this great new pedal." - Andy Summers

The Andy Summers Walking on the Moon is an analogue flanger with a simple but powerful control set of RATE, RANGE, and COLOR. RATE sets the speed of modulation which ranges from slow, smooth filter sweeps to jittering vibrato. RANGE controls how narrow or wide the effect sweeps into the bass frequency range. The COLOR control effects the intensity of the flanger effect from subtle chorusing effects to classic jet woosh sounds. These three controls interact to create a wide breath of modulation effects.

Additionally, the Walking on the Moon includes a FILTER MATRIX which disengages the LFO from the flanger circuit, freezing the flanger giving a fixed filter effect, which can add chime or metallic overtones to your sound without the movement of a traditional modulation pedal. A DRY output allows you to split your dry signal from the effected signal.

Special Artist Edition graphics featuring Andy's signature adorn the chassis and a tribute Walking on the Moon poster with art by Laura Josephson is included with each pedal.

Analogue Flanger / Filter Matrix sounds of Andy Summers
RATE sets modulation speed
RANGE adjusts lower limit of flanger sweep
COLOR controls intensity of flanger effect
Dedicated DRY output
Special Artist Edition Graphics
Includes Walking on the Moon poster design by Laura Josephson
True Bypass
9V Power Supply included (optional 9V battery not included)

Specifications
Circuit: Analogue
Bypass: True Bypass
Audio: Mono
Power Supply: 9.6VDC-200mA power adapter included (optional 9V battery not included)
Dimensions (in): 4.75 x 4 x 2.25
Current Draw: 40mA
Year Released: 2023

Notes: The Behringer Wing, acclaimed for its advanced technological capabilities and unparalleled flexibility in mixing, has swiftly become something of a linchpin in the audio production realm. Acknowledging its pivotal role and in answer to a strong demand for reliable protection, Decksaver are delighted to unveil the cover for the Behringer Wing.

This cover, painstakingly fashioned from premium-grade polycarbonate, is tailored to provide the highest level of protection for your Wing, shielding it from dust, liquid spills, and accidental knocks, thus ensuring the mixer's durability and operational excellence.

Engineered with precision to match the Wing's distinctive design, this cover ensures a flawless fit, covering all the mixer's components, including faders, knobs, and screens, whilst still allowing easy access to all essential connections. This consideration is crucial for audio professionals who demand both robust protection and swift, efficient access for setup and dismantling, as well as safeguarding against unintended interference during live setups. Whether in a lively live setting, a bustling studio, or whilst in storage, this cover acts as a steadfast guardian, preserving both the functional and aesthetic integrity of your Wing.

Choosing this cover for your Wing is not just about providing protection; it's about pledging to the upkeep and maintenance of a key piece of audio equipment. Esteemed and sought after by industry professionals, this cover is an essential asset for anyone committed to keeping their Behringer Wing in immaculate condition, ready for any mixing scenario or creative pursuit.

Dimensions

Weight: 1.957 kg
Length: 87.9 cm
Width: 59.6 cm
Height: 6.8 cm

Material: Smoked clear polycarbonate.

WARNING: When your Decksaver cover is in place, please ensure that your equipment is kept away from direct and high heat sources, such as radiators, fires and sunlight.

Notes: Modern classics. Open-backed design means they leak some sound but give a really clear impression of your music. Solid option for production work and mixing.

Supplier notes:
The DT 990 PRO is an open dynamic headphone for studio applications. Due to a weight reduction of the diaphragm an excellent sound reproduction quality is achieved. Its rugged design with a spring steel headband ensures a secure fit and withstands all demands. Soft headband and ear cushioning systems ensure a high comfort over long periods of time.

Beyerdynamic's DT PRO headphone series has it's roots in the early 1980s. Since then, millions of audio professionals from all parts of the world have become loyal users of beyerdynamic products. The series has been designed to cater for listening in a wide variety of environments, thanks to different headphone construction.

Notes: Are you and your session players and bandmates tired of straining to hear underpowered headphones? That's why Jim Odom and his jambalaya-fueled team of engineers designed 150 mW headphone amps for the HP4 headphone-distribution system.

These headphone amps are not just loud enough for session and stage use, they're loud enough to explode the oysters in a Po' Boy sandwich. Yet the sound is clear and clean, with a wide dynamic range. At last, everybody will be able to heariassuming they are capable of hearing. Be careful with that level control.

Simplicity is the HP4's hallmark. You get left and right line inputs, left and right line outputs with level control, and the 4 x headphone outs. You can globally mute the headphone outs, adjust the overall headphone level, sum the stereo signals to mono, and mute the rear-panel Monitor outputs.

The HP4 can sit on a tabletop or can be screw-mounted to a standard rack tray (not included), where it requires just 1/3 rackspace. And if your needs grow, you can use the line outputs to feed the inputs of a second HP4 or an HP60. Chain as many headphone systems as you need.

So listen up. Quit struggling with mediocre headphone amps. Get the HP4 and hear everything loud and clear. You owe it to your music.

www.youtube.com/watch?v=GOt3LDMtsFM

Notes: When the pros need an EQ, they turn to dbx. With a proven track record that spans four decades, the dbx EQs are the industry standard for touring, studios, and audio installations. With the dbx heritage of revered pro EQs, the 131s meets the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls.

The dbx 131s includes a single 31-band channel of 1/3-octave equalization, 12 dB input gain, switchable +/-6 dB or +/-12 dB boost/cut range, 20mm nonconductive sliders, an intuitive user interface, and output level metering. From its extended 10Hz to 50kHz frequency response and 110 dB dynamic range to the quality componentry and meticulous attention to detail, the 131s offers exceptional sound and rugged reliability that guarantees you will always sound your best.

Sure to find a home in the studio, on tour and with installed sound venues, the dbx 131s is destined to take its rightful place in the lineage of great dbx signal processors that are the professional's choice in signal processing. With such affordable quality, there's no longer any excuse for compromising your sound.

Notes: The Korg Volca Keys is an ideal introductory synthesizer, with a simple, yet powerful polyphonic analog sound engine and loop sequencer.

The Volca Keys is a long awaited synthesizer that adds a new chapter to the long and storied history of Korg's analog synthesizers. This 27 key analog lead synth delivers unbelievably powerful sound in a compact body. Starting with a filter section that uses the circuitry of the legendary miniKORG700S (1974), it delivers astonishing sound that takes full advantage of Korg's half-century of know-how in circuit design.

With a simple structure that includes delay effect and a sequencer, it's also an ideal choice for a first analog synth. It offers the richly expressive sounds that are distinctive of analog, providing the enjoyment of simple yet deep sound-creation. The possibilities are endless; you can use the three oscillators to play chords, use them in unison with detune to produce solid lead lines, or apply ring modulation to create far-out metallic sounds.

The Voicing function makes it easy to specify how the three oscillators will be combined. Choose between poly, unison, octave, fifth, unison ring or poly ring simply by turning a dial. Easy for those taking thier first steps into synthesisers, the Volca's simple design makes it easy to obtain a wide variety of sounds.

Record phrases as you play them with the Volca Keys using the loop sequencer. With up to 16 steps, it's easy to create phrases as they come to mind. Use the overdub recording function to produce complex loops, with up to 8 sequence patterns able to be stored in internal memory. Craft your loops with the motion seqence function, apply time varying changes to your sound to enhance loops and add originality to your life performances.

Skip a step during sequence playback with active step, a function that creates effects similar to a short loop or unexpectedly irregular rhythms. This allows you to create a dynamic performance just as though you were performing the sequence itself. Flux function lets you play back the phrase without quantizing the steps, producing a loop with a distinctive sense of groove.

A useful self-tuning function constantly tunes the oscillators, so you never need to tune during a performance or wait for the pitch to stabilise after turning the power on.

Connect the Volca Keys with the rest of the Volca Series or a Monotribe using the sync jack. A MIDI in connector lets you synchronise with other devices, play the Volca from any MIDI keyboard and send note messages from your DAW.

The Volca Keys analogue loop synth has a compact size and a built-in speaker, easily playable anytime, anywhere. The ideal starter-synth.

http://www.youtube.com/watch?feature=player_embedded&v=7rbcYJ326EI

Notes: Peerless beats generated by solid analog drum sounds and an Electribe-style sequencer.

A vintage-style analog drum machine from Korg's recently announced Volca series. The Volca Beats includes a 16-step sequencer and 6 x editable analog parts including kick, snare, Hi/Lo toms and open & closed Hi-Hats designed to provide sounds reminiscent of classic 80s drum machines. It also has an additional PCM engine which is said to produce 4 x Lo-Fi percussion sounds including clap, claves, agogo and crash sounds.

There is one-knob-per-function parameter control for crafting each of the six analog sounds including click, snappy, pitch, decay and grain. The PCM sounds have control over pitch and speed. There is also a Level knob allowing volume adjustment of each part.

The 16-step LED-lit sequencer has 8 x memory locations for saving patterns. It includes a recordable stutter function for generating repeated triggers (or drum rolls) and delay effects, an active step feature for quickly adding or removing individual steps, and a step jump function that will instantly play any step. Notes can be entered live as the sequencer is running.

You can also wirelessly synchronise playback of all of the units in the Volca series with any iOS music app that support Korg's Wireless Sync-Start Technology (WIST) using their SyncKontrol iPhone app. This also allows control of the swing settings and fine control of the tempo (including tap tempo).

The Volca Beats is battery powered (with optional AC power) and includes a built-in speaker. It weighs in at only 372g with dimensions of 193 × 115 × 45 mm (W x D x H).

The Volca Beats editable controls include:

Kick (click, pitch, decay, level)
Snare (snappy, pitch, decay, level)
Hi/Lo toms (hi pitch, low pitch, decay, level)
Open/closed Hi-Hat (closed decay, open decay, level)
PCM sounds (pitch, speed, level)

Notes: "Old school tube mellow" is the phrase most often used to describe the sound of the V67G. Designed mainly for vocals, the V67G combines Class A FET circuitry and a transformer-coupled output resulting in a pure and warm sound. Its classic green body and gold plated grill provide stunning good looks. The V67G adds body to vocals for all styles of music. This top-seller has been used on countless recordings and is a welcome addition to your microphone collection.

Classic FET design with warmth and midrange makes this mic perfect on both drums and vocals
Perfect addition to any mic locker adding "classic" character to ordinary sources
Transformer balanced output ensures more of your source and less noise

Technical specifications:

Mic type: Condenser microphone
Capsule: 32mm capsule with Gold-sputtered, 6 micron diaphragm
Frequency response: 20 Hz - 20 kHz
Polar pattern: Cardioid
Sensitivity: 15mV/Pa
Impedance: 200 ohms
Equivalent noise level: 20 dB (A-weighted IEC 268-4)
S/N Ratio: 74 dB (Ref. 1 PA A-weighted)
Max SPL for .5% THD: 130 dB
Power requirements: 48V Phantom power

Size and weight:

47 mm x 184 mm / 1.85 in. x 7.24 in.
590g / 1.3 lbs

Metal finish: Green with gold grill

Included accessories: MT-001 hardmount

In the box:

MXL V67G Mic
Hard Mount Mic Stand Adapter
Carrying Pouch

Notes: There are lots of good reasons why these are some of the most popular studio headphones on the market. Clear sound, comfortable and good isolation. Perennial favourites from Japanese headphone specialists Audio-Technica.

Supplier's notes:
This is the most critically acclaimed model in the M-Series line, praised by top audio engineers and pro audio reviewers year after year.

The ATH-M50x features the same coveted sonic signature, now with refined earpads and detachable cables.

From large-aperture drivers to sound isolating earcups and robust construction, the M50x provides an unmatched experience for the most critical audio professionals.

This product includes interchangeable coiled and straight cables, a carry pouch and a 1/4" jack adapter for universal compatibility.

Notes: The UDG Ultimate DIGI Backpack Black/Orange Inside is specially designed to cater for the laptop-based generation DJ affording them maximum functionality with performance orientated style.

Fits: Pioneer DJM-S5, DDJ-XP2, DDJ-200, Akai MPC Live II, NI Maschine MK3/ Jam, Numark Scratch, PT01 Scratch, or similar size controllers.

Ultimate DIGI Backpack specially designed for the laptop DJ. Constructed from high quality water resistant Nylon, it contains a cleverly designed side entry compartment for a laptop up to 15.4" without having the hassle of going through the main body of the bag. The bag main compartment can hold an extra laptop and it can also hold a Native Instruments MASCHINE MK2 size MIDI controller. There is a detachable interface pouch and on top of the bag there is a padded, quick access headphone pocket. There are 5 zipped compartments to securely store USB sticks, SD cards, wires and cables, AC power adapters, compact camera's, MP3 player, and other accessories.

Specifications

Colour: Black, Orange inside
Weight: 1,80 kg / 3.96 lbs
Outer Dimensions (W x H x D): 43.0 x 31.0 x 28.0 cm | 16.9 x 12.2 x 11.0 inch
Inner Dimensions (W x H x D): 42.0 x 30.0 x 13.0 cm | 16.5 x 11.8 x 5.1 inch
Material: Water Resistant Nylon 450D
Protection: Various padding used

Extras

Front compartment with organization panel and detachable pouch for audio interface
5 exterior pockets for personal essentials, including one with earbud pass-through for Mp3 players
S-curved shoulder straps for ultimate comfort.

Fits:

Up to 15.4" laptop, LP's
Pioneer DJM-S5, DDJ-XP2, DDJ-200, DDJ-XP1, DDJ-SP1, DDJ-WeGO 3/ 4, Toraiz Squid
NI Maschine MK3/ Jam/ MK2
Denon DJ MC2000, SC2000
Akai MPC Live/ II, MPD226, MPD232, MPD32, MPD26, MPK Mini MK II, MPC Element, MPC 500, APC 20, APC Key 25
Ableton Push/ 2
Allen & Heath Xone 23/ C, Xone 43C
Novation Launch Control XL, LaunchPad Pro, Circuit, Twitch, Numark Scratch, Omni Control, Stealth Control, Party Mix, iDJ Live II, Mixtrack Edge
Reloop Beatmix, Digital Jockey III/ II, Mixage IE, Neon
Roland Aira MX-1, TR-707, MC-202, TR-8, TR-8S
Korg MicroKey 25
M-Audio Oxygen 25, Trigger Finger Pro,
Arturia Drumbrute
Gemini FirstMix Pro, Slate2, Slate4, CDJ-700,
Hercules P32 DJ Controller, Universal DJ, DJ Consule 4-MX, DJ Control Air S, DJ Control Wave, DJ Control Instinct
Livid CNTRL:R
Stanton DJC.4
Vestax Spin 2, VCI-300/MK2, VCI-100/MK2
Audio interface or MP3/MP4 player, books and magazines

Notes: The Kenton Merge 4 can merge the data from up to 4 separate MIDI sources (e.g. Master keyboards or controllers) into a single MIDI data stream which appears at both of the MIDI out sockets. It features 4 opto-isolated MIDI inputs and 2 MIDI outputs.

The Kenton Merge 4 is powered from a mains adaptor (wall wart) so you can fit and forget.

Comes with multi-region power supply

Notes: The Oxygen Pro 25 is a powerful, 25-key USB powered MIDI controller that allows you to create the music you want to make even easier! The new Oxygen Pro controllers open up worlds of expression and creativity and make bringing your production ideas to life more seamless than ever. Taking feedback from users and artists alike, these controllers are the ultimate studio and live performance tools, allowing you to keep your focus on creating music- not programming your software. It doesn't matter if you want to create music on the go or in the studio, the M-Audio Oxygen Pro series is perfectly flexible for your workflow.

It's simple to use the Oxygen Pro 25 controller with any DAW with the Oxygen Pro 25's automatically mapped controls such as Transport, Faders, Channel controls (Record Arm, Solo, Mute, and Select), Pan controls and more. Whether you use Ableton, Pro Tools, MPC Beats, Cubase, Logic, Studio One or any other major DAW, just select your DAW in the Oxygen Pro 25's and select the correct configuration in your DAW, and the Oxygen Pro 25's controls will be completely integrated into your DAW! It also instantly maps to all the virtual instruments included with the Oxygen Pro 25's (Velvet, Mini Grand, Vacuum, Boom, DB33, Xpand!2). These world-class Air Music Tech plugins can be fully controlled by the Oxygen Pro 25's and used in real-time as you create and mix your music.

With Smart Chord and Smart Scale technology, creating music and transferring what's in your imagination to what you hear coming out of your computer has never been easier!

With Smart Chord activated, pressing a single key or pad will play a full chord rather than just one note. The key or pad you press will determine the root note in the chord. The rest of the chord's properties (Major, Minor, and Voicing - 1,3,5; 1,3,7; 1,3,5,7, etc.) are determined by the settings you choose. Smart Chord also has a Custom Mode which lets you to determine the chord structure that will be assigned to each key by manually playing it. For example, if you select Custom Mode, and play a 1-b3-5-b7 chord, every key will then be assigned to play this chord structure. The note of the key you press will serve as the root of the chord and all of the parameters can be edited right on the Oxygen Pro 25!

The Oxygen Pro 25 also features intelligent Smart Scale technology. With Smart Scale, you can set the key bed so that only notes in the selected scale are able to be played. This allows you to play within a chosen scale without the risk of playing any "wrong" notes. You can choose from 16 different scale variations when assigning a scale to the keyboard. Smart Scale is easy to activate and deactivate and allows you to set the scale parameters you need to keep you focused on creating.

Built into the Oxygen Pro 25 are features that are essential to creating modern day pop, electronic, hip hop, and dance music. Note Repeat and the built-in Arpeggiator open up a world of precise music production and live sound techniques to make your music sound professional.

Note Repeat allows you to hold down any of the custom-made M-Audio performance pads and you'll hear a repeated rhythmic pattern at a selectable note division. The Note Repeat feature can be activated momentarily or can be used in Latch mode. If you choose Momentary, holding the Note Repeat button will make the note played by the pad automatically repeat. If you choose Latch, pressing any pad will cause its assigned note to repeat without you having to hold down the Note Repeat button.

The built-in Arpeggiator Arpeggiator will affect anything you are playing on the keys from any virtual instrument in your DAW. When the Arpeggiator is activated, the keyboard will repeatedly play the pressed keys in sequence. The arpeggiator's timing and rhythm is based on the keyboard's time division setting and either the keyboard's or your DAW's tempo setting. Each note in the arpeggio will be the length you've selected for the time division setting; for example, if you select 1/4, each note in the arpeggio will be a quarter note. This powerful tool can operate in Latch or Momentary mode, making it easy to unleash your creativity.

What's In The Box:
Oxygen Pro 25
USB Cable
Software Download Card
Quickstart Guide
Safety & Warranty Manual

Dimensions: 10.4" x 19.3" x 3.3" / 264.1 x 490.2 x 83.3 mm
Weight: 5.4 lbs / 2.46 kg

Notes: Mix up to four stereo channels in just 4hp, or chain multiple modules together to add channels. Inputs are normalled for mono operation. Simple, compact and high quality at a reasonable price.

Supplier's Notes:
4xSt.Mixer is 4 HP quad stereo mixer.

Right inputs are normalled to Left inputs for easy mono operation

Several 4xSt.Mixers can be chained together or with other HN stereo modules via sockets on the back side

65 mA +12V
50 mA -12V
35 mm deep

Notes: Buzz. Beep and bloop. Get high on the lo-fi sounds of "old-school" games, toys and terminals!

The Mainframe provides sample rate reduction ranging from 48kHz to 110Hz. A little background... the sample rate is the number of times per second that a sample or snapshot of an analogue signal is taken. For example, CDs (remember them?) had a sample rate of 44.1kHz which means that the original analogue signal is sampled 44,100 times per second.

The sample rate defines the frequency range that can be reproduced while maintaining good fidelity. When the sample rate is reduced the quality of the audio is degraded and aliasing occurs. Aliasing means audible artifacts created when higher frequencies are sampled at an inadequate rate and the result is distortion. The Mainframe's sample rate range is wide enough to take you from sounds that are quite pristine to sounds that are unrecognizable when compared to the input signal.

It also provides bit crushing ranging from 24-bit to 1-bit. What does that mean? Bit crushing is bit depth reduction. Back to the CD example... CDs used a 16-bit bit depth meaning that each of its samples was represented by 16-bits of information. Higher bit depths can accurately represent a greater dynamic range while bit crushing increases the number of sampling errors and creatively degrades the sound to bring us back to those nasty "old school" sounds we love.

The Mainframe's selectable High/Low/Band-Pass filter lets the user shape the artifacts of the bit crushing and sample rate. Another very cool feature is its Sample Rate Tuning Mode where the pedal analyses your input signal in real-time and sets the sample rate to match the pitch of your signal, or a set interval above your signal. This allows you to set the sample rate to match the key of a song, or it will continually adjust the sample rate based on what you play!"

Specifications

Circuit: Digital
Bypass: Buffered Bypass
Audio: Mono
Power Supply: 9.6VDC-200mA power adapter included
Dimensions (in): 4.5 x 2.75 x 2.1
Current Draw: 90mA
Year Released: 2020

Notes: The Fold Processor is a voltage-controlled wave multiplier and sub-octave generator. The circuit is based on a classic diode design that adds odd harmonics by folding the incoming signal, followed by subdivided square waves.

The wave folder creates new waveforms from standard sine, triangle, sawtooth, and square waves and includes a CV input with an attenuator, making it very easy to create beautifully animated folding sounds. Adjustable voltage-controlled Inject alters the bias point creating an even wider palette of sounds.

The subdivide generator squares the fold output generating 4 more sounds spaced one octave apart, each with its own gain knob and mixed to the Subdivide output jack. Mixing the four can create anything from discordant square wave swarms to sweet harmonic oscillator stacks, from a stable square version of the folded wave to freaky PLL-like glitched slides.

Overall results can sound evil at times and sweet at others, a true multi-faced devil.

Size: 12HP
Depth: 31mm
Power: +12V 60ma / -12V 55ma

Notes: Clever FM module that does digital-style through-zero FM using analogue circuits. Use any signals from other modules as your carrier and modulator, then phase modulate or wavefold in the FM Aid.

Supplier's Notes:
FM AID is a module designed to perform through-zero linear Frequency Modulation (FM) in the analog modular world. Any arbitrary signals can be used as a Carrier and Modulator. The module copies FM in how it is done in digital implementation, but in a completely analog circuit free of digital aliasing artifacts. Digital or software FM oscillators are mainly based on a ramp waveform which is then shaped to other waveforms. This is also represented in the FM AID module: sawtooth signal is expected on the Carrier input to give the indicated sine, triangle, sawtooth and square waveforms on the respective outputs. However the user is not limited to only use sawtooth for the Carrier and any other signal can be plugged giving many complex waveforms at the outputs.

All known FM tricks from digital implementation are also applied - you can endlessly experiment with the Carrier/Modulator frequency ratios, Modulation index (FM knob), Modulator's amplitude shaping (CV knob), feedback FM (output is fed back to the Modulator's input) and many other.
Carrier input has normalled connection to the Modulator's input. This internal routing is disconnected each time a plug is inserted in the Modulator's input. That is a handy option which allows the module to be used with only one signal source - this single signal will act as Carrier and Modulator at the same time. There won't be any frequency differences between Carrier and Modulator in this case, but many interesting wave folding sounds will be available anyway.

Technically speaking FM AID uses Phase Modulation, not Frequency Modulation. The sonic difference is that the produces sound is brighter.

SPECIFICATIONS

Carrier input level: -5V ... + 5V (can also accept inputs ranging from -1V ... +1V] to [-12V ...+12V] / [-15V ...+15V] using onboard trimmer)

Modulator input level: preferably -5V ... + 5V

CV input level: preferably -5V ... + 5V

outputs level: -5V ... + 5V

outputs impedance: 1 kOhm

module depth: 3 cm or 1,5 inches

power consumption: +45 /-45 mA at +/-12 Vdc, +50 /-50 mA at +/-15 Vdc

Notes: All channels support headphones with 16 - 600 Ohm impendances.

Superb sound with low distortion and great low end.

Linkable channels (B to A and C to A).

All inputs with multiples, ie feeding different mixer channels.

Mono input is normalized to stereo.

Protected with relais, assuring soft starts and DC protection for your headphones (> +/- 10V input)

Width: 12 HP

Notes: This module is a 8 ins and 8 outs precision buffered matrix.

Every output has a rotary switch to select an input. You can make the same input go through several outputs but not several inputs go to the same output.

There's also a bicolor led next to every switch for visual info of the signal that is going thru it.

Allows fast patch changes and easy rerouting signals, both audio and cv.

Can be used as a traditional buffered multiple, pretty flexible one: 1 x 8 outs, 2 x 4 outs, 4 x 2 outs or any other combination.

62 mA +12V
65 mA -12V

Notes: Nice dual-module gate/envelope generator which can run off any audio signal. Feed it drums, synths, samples or a mic input and and generate CV modulation signals.

Supplier's Notes:
The Percussion Interface (PI) and PI Expander are a pair of Eurorack modules that generate gates and envelopes from acoustic drums, samplers, drum machines, and virtually any audio source.

Converting microphone, instrument, line and modular signals into CV and clock/gate signals, the PI and PI Expander are suited for synchronizing sequencers or other modules to the rhythm of an audio track or live percussion. The modules can simultaneously be used as a pre-amp for microphones or line-level signals, while generating inverted envelopes useful for side-chaining. The PI module contains all the core functionality and can be used without the Expander to conserve space. The Expander requires the main PI modules and adds three gain stage options, a modular-level audio output jack, a 1/4" (6.35mm) input jack, and envelope attenuation capabilities. The two modules are only sold together, they are not available separately.

Electrical and Mechanical Specifications:
Module size (PI):
4 HP Eurorack formal module
0.98" (25mm) maximum depth with power cable
10-pin Eurorack power header

Module size (PI EXP):
4 HP Eurorack formal module
0.98" (25mm) maximum depth with power cable
8-pin cable connects to PI

Power consumption:
with PI Expander
+12V: 104mA
-12V: 65mA
without PI Expander
+12V: 69mA
-12V: 56mA

Audio Inputs:
1/8" [3.5mm] on PI main module, and 1/4" [6.35mm] on PI Expander
100k input impedance, AC-coupled

Audio Outputs:
Voltage range: -10.4V to +10.8V, DC-coupled
1k output impedance
Gain Characteristics
Gain range: < -100dB to +54dB (500x)
Clip light turns blue when signal (post-gain) exceeds 2.5Vpp
Gate is triggered when signal (post-gain) exceeds 6.3Vpp
Clip light flashes red when signal clips on Audio Out jack (exceeds +10.8V)
Gate Out Jack
1k output impedance
+8V gate/trigger signal
6ms - 0.5s pulse width
+ Env Out jack (jack on PI main module)
1k output impedance
+9V peak (sustain), -60mV resting (off)
15ms attack time
70ms - 6s exponential decay time (1% of peak voltage)
- Env Out Jack (jack on PI main module)
1k output impedance
+9V resting (off), -150mV peak (sustain)
15ms attack time
70ms - 6s exponential decay time (1% of peak voltage)
Env. Out jack (attenuated jack on PI Expander)
1k to 26k variable output impedance
+9V maximum
-60mV minimum
Inv. Out jack (attenuated jack on PI Expander)
1k to 26k variable output impedance
+9V maximum
-150mV minimum
Included with the PI+EXP:
8-to-16 pin power cable
8-to-8 pin cable for connecting to the Expander
M3 Knurlie screws (4)

Notes: High-resolution sound at a low price thanks to Tascam's US-HR range, provided here in 2-in, 2-out format with integrated MIDI in and out. Simple, no-fuss solution for hooking up to your DAW.

Supplier's Notes:
High-Resolution USB Audio/MIDI Interface (2 in, 2 out)

The US-2x2HR is a member of the Tascam US-HR series of high-resolution USB audio interfaces. It provides two mic/line/instrument switchable inputs and two balanced line outputs as well as MIDI I/O to your Windows or Mac computer or your iPhone or iPad. This interface is ideal for music creation and home recording with high demands on simple operation and studio-quality sound. The included loopback function and support for Open Broadcaster Software (OBS Studio), however, makes it also an excellent choice for podcast creation and live streaming.

The compact US-2x2HR incorporates a wealth of features, including high audio resolution up to 24-bit/192 kHz, ultra-low latency with a Windows buffer size starting at four samples, Ultra-HDDA mic preamplifiers with 48-volt phantom power for superior sound quality with ultra-low noise, a robust USB Type C connector, and a rich assortment of included software to start producing audio right away. This interface can also be used for mobile production or live streaming using your iPhone or iPad with the included Cubasis LE. Simply put, the US-2x2HR helps you create and distribute great-sounding audio wherever you go.

All US-HR models offer a unique dye-cast aluminum honeycomb structure on the side panels with a slight upward tilt. This design not only results in a sleek, eye-catching design, it also provides just the right amount of weight so the interface won't move when cables are connected or disconnected. Equally important, the upward tilt offers the ergonomic benefit of being angled in such a way as to make the interface easy to work with.

If you're a musician, producer or home-recordist who needs a solid, uncluttered, easy-to-use audio interface with superb sound quality, the Tascam US-2x2HR can be your reliable partner for many years.

The Ultra-HDDA (High-Definition Discrete Architecture) mic preamps used on the US-HR series feature a discrete construction. They have a higher number of components and are far away from mass-produced preamps. Their EIN (equivalent input noise) rating, which measures the absence of noise, is truly low for the US-2x2HR and US-4x4HR. Combined with a newly improved audio circuit and support for sampling rates up to 192 kHz, our in-house developed microphone preamplifier delivers enhanced audio performance with the most transparent and low-noise sound, reflected in a signal-to-noise ratio of 110 dB.

One issue when recording using a computer is latency, which is when audio signals are delayed through digital circuitry. Another is setting up the driver software that is used when connecting an audio interface to a computer. In order to eliminate these problems, our driver software introduces only very little latency and is easy to install. Furthermore, by making the external structure of these interfaces as simple as possible, the Tascam US-2x2HR and US-4x4HR allow users who are not expert users of audio equipment to operate them without concern.

The Settings Panel, which is installed on your computer, comes with a variety of functions. You can choose whether direct monitoring is done in mono or stereo and adjust the balance between input and computer signals. You can also switch the hardware inputs on and off individually and set the Windows buffer size according to your working environment.

For online broadcasting, Internet communication and other live streaming applications, the US-HR series interfaces offer a Loopback function which can merge input signals 1/2 with signals 1/2 coming from the computer (each can be set to mono or stereo) and send that mix to the broadcasting or other software on the computer. A software slider allows to adjust the final "broadcast" volume independently from the unit's line output level setting.

Instead of a computer, you can also use an iPad or iPhone together with the US-2x2HR/US-4x4HR to make music. Performance has been tested with not only the bundled digital audio workstation (Cubasis LE3), but also with other popular recording software - you can continue to use them even if you change DAW software. Since these units include MIDI inputs and outputs, you can connect MIDI keyboards, drum computers etc. to play sounds on the iPad or computer and thus expand your personal orchestra.

Maximum input level (Mic/Line/Inst): +10 dBu / +20 dBu / +10 dBV
Maximum input gain: 56 dB
Maximum output level: +20 dBu
Mic preamp equivalent input noise: 128 dBu
S/N ratio: 108 dB / 110 dB
Distortion (THD+N, mic to computer): 0,0013 %
Crosstalk: 95 dB
Power supply: USB / DC 5 V, 700 mA
Power consumption: 1.75 W
Overall dimensions (W x H x D): 186 mm x 65 mm x 160 mm
Weight: 1.1 kg

Notes: Sindikat is made to be placed in the heart of every modular setup: copy, invert, attenuate, scale, get different polarity versions simultaneously of two pair of mixes, mix CV as well as audio (up to 8 sources in total), mute or switch to add desired source to a bigger unity mix, scale two separate mixes with chosen gain.. All circuits can preserve their independent use and/or be combined!

Details & use:

The module consists of circuits designed to group the most useful operations for signal mingling in modular synth setups -but in the more fun manner!

It is designed in the way that the circuits can function independently -be patched to the other modules- or to be combined inside the module at the same time!

On the top of the module there is a buffered multiple (the bi-color led is indicating signal input and its polarity) : Next to the input there are two outputs giving the exact copy of the incoming signal. On the third output you'll get the 'attenuverted" version of that signal which is controllable by the dedicated attenuator/inverter potentiometer.

This signal can be further added (or muted) via its switch, internally to a unity gain mixer situated on the bottom of the module via its SUMM OUT.

This mixer has its own 3 inputs who will accept CVs as well as audio signals with an output gain of 1/3.

Its bi-color led will indicate the polarity of the incoming signals.

In the center of the module there is a CV Processor consisting of two mixers each mixing two signals- in the way that:
The first one takes two signals (A and B) and outputs simultaneously the positive version of their mix (AB+ OUT) and the negative version (AB- OUT).
Their gain is scaled by the potentiometer: going on 1x in the middle position to 2x fully turned. (After middle position with a stronger signal and due to higher gain it will start to saturate producing an distortion-like effect)
Further, via their switch, those mixes also can be added to a unity gain mix (SUMM OUT) and therefore creating a larger mix.
You'll do that by choosing which polarity output you want to send to a summing mix.
In the middle position of the switch the signal is "off" so you can use this to mute/un-mute the signal in the unity mix. Also, even if it is in "off" position this only breaks the internal link to a unity mix but you can still use their distinctive outputs to send your positive and negative mixes elsewhere in your system.

Goes the same for the second one: C and D inputs giving positive (CD+) output result and negative (CD-) simultaneously , all with gain select and the switch choice for summ positive or negative (or none) to a bigger unity mix.

You can also choose to use those two circuits as a simple attenuators for ex. by patching only one signal so you'll get an attenuator and polarizer at once!

The module can process CV and audio as well in every circuit.

Therefore, by summing eventually all the signals to a final "SUMM OUT" output you can create up to 8 sources -in the module- large mix!

Made for more fun with a modular!

This module fits perfectly well with Modulaire Maritime "Decca" switch-based manual control module.

As these modules are developed from practicing recording in "one take" (same for a live performing), combining them you get an extended control over CVs, gates and audio going on in the system, allowing to switch- stop/mute, change polarity, introduce/mix more gates, drums,.. on the fly.

8hp
25mm deep
Reverse voltage protected

Notes: DVCA

DVCA is a dual VCA based on the Mutable Instruments Veils. It features two separate voltage-controlled amplifiers, both with a gain and a response curve potentiometer, that is variable from linear to exponential. The outputs are normalized, so when no patch cable is present on output 1, output 2 will contain both signals, allowing the module to be used as a mixer. Several DVCAs can be daisy-chained for voltage-controlled mixer operation. It comes with jack lights that can be disabled via a jumper on the back.

These modules use tall bushing potentiometers to offer a more stable feel.

The module is fully assembled and tested. Eurorack power cable included.

Notes: Dual xFade is a compact voltage controlled crossfader suitable for both audio and CVs. Smaller knobs set manual crossfade between A<>B, and bigger knobs are CV attenuverters. LEDs show the adjusted positive and negative CV sides for easy monitoring.

Upper inputs (section 1) are normalled to lower inputs (section 2). Thus the same signal pair A&B can be differently crossfaded in both sections.

The switch clones section's 1 controls to the section 2, which is useful to make stereo Dry/Wet adjustment or stereo VCA.

This module can be used as:

two independent crossfades

two independent VCAs

stereo crossfade or Dry/Wet control

stereo VCA

panner

Four jumpers on the back can give optional 5x amplification for each A or B input. Sot it is easy to crossfade modular level with linear level from pedals. Installed jumpers give 1x amplification, removing jumpers gives 5x amplification.

Output 1 is mixed with output 2 if left unconnected.

Notes: Pico EF is Erica Synths' take on envelope follower module in 3hp! Pico EF features a preamp with +40dB gain (enough to boost even guitar and dynamic microphone signals for use in a modular system), envelope output with adjustable attack time and a gate output with adjustable threshold. The Pico EF can be used as a preamp, overdrive unit or for controlling VCFs with audio signal, or to use with external instruments to control your modular system in other creative and experimental applications.

Technical specifications:

Preamp boost: up to +40dB
Audio output level: 10Vptp
Envelope output level: 0 - +10V
Gate level: +5V
Power consumption: 25mA, -15mA
Module width: 3HP
Module depth: 35mm

Notes: Incredible sounding VCO module that helps you get incredibly rich signals out of your synthesizer. The Dreadbox Hysteria VCO features a huge frequency range of 16hZ to 32kHz. This gives you a lot of functional pitch to work with, allowing you to explore the sounds capable from this module.

The sounds themselves rest on a variable waveform selector - meaning you can scroll through the waveforms and blend them together. This can even be CV controlled, so you can obtain an evolving sound that changes over time. The modules in the Chromatic series give you a great starting point in the world of modular synths and are a must-have for beginners and professionals alike.

Power Consumption: 114mA @ +12V , 46mA @ -12V
10HP
35 mm deep

Notes: Great value for FL Studio users with this dedicated controller which channels Akai's expertise in order to offer a hands-on experience for your DAW. Quicker workflow and easier access to settings.

Supplier's Notes:
The new Akai Professional Fire represents the first of its kind, a dedicated hardware controller for the FL Studio Digital Audio Workstation (DAW) platform. Created in close partnership with Image-Line, Fire is a high-performance tool designed to enhance the workflow and music-creating experience for all FL Studio producers.

Fire features a dedicated browser function to navigate, audition and load your audio samples, recall project files and open plugins. Simply select browser and use the Select rotary encoder to preview and load content and devices within FL Studio - The graphical OLED display makes for easy browsing and controlling the various files, menus and parameters within your session a breeze.

Featuring plug-and-play integration, within seconds you'll be creating patterns and building tracks using Fire's 4 x 16 velocity-sensitive RGB pad matrix, designed for immediate interaction with FL Studio's celebrated step sequencer.

Get hands-on with your production with everything you need to control FL Studio's channels and patterns. With direct hardware control over your session, you can easily mute and solo channels, expand the grid matrix, select new channels, navigate through patterns and much more without touching a mouse.

From searing synth leads to lush pads, Fire's Note mode provides the ultimate platform to add melody and harmony to your production. Simply push the Note button and Fire's RGB pads switch-up to a MIDI keyboard giving you three octaves of note data, perfect for playing all of your instruments hosted in FL Studio.

Fire's pad matrix features an MPC-style 16-pad layout for seamless integration with FPC and SliceX. This is great for FL Studio producers who want a traditional beat-making experience or want to use their finger-drumming chops on the track.

Whether you're a studio producer refining an arrangement or live performer looking to take your sessions to the stage, Fire's Performance mode provides the ideal platform to remix and reimagine your tracks. Simply select Performance mode and launch MIDI clips and audio directly from Fire's RGB pad matrix for a truly inspiring live production experience.

Fire also provides immediate access to transport controls straight from the hardware. Record, Stop, Play, as well as a button to instantly switch between Pattern and Song mode are intuitively placed for mouse-free control of FL Studio. Plus, these all double up with secondary controls providing access to Loop Record, Countdown, Wait and Metronome.

Bringing a tactile, mouse-free mixing solution to the FL Studio environment, Fire includes 4 banks of 4 touch-capacitive knobs that enable the user to instantly see and adjust parameter values. Providing control over channel, mixer and user-assignable parameters, this enables a more intuitive and enjoyable workflow. From tweaking volume and pan within FL Studio's mixer to adjusting filter controls within the selected channel and recording automation, you'll spend less time clicking and more time executing.

Speed is power. Up to four Fire devices can be connected at once, enabling unprecedented hardware control over the FL Studio mixing and production workflow. Expand channels or make more in the sequencer accessible by selecting Multi-Device Mode from the OLED display. Instantly expand the 4 x16 matrix of one Fire unit to an 8 x 32 workflow.

Enter the ground-breaking, high-powered workflow heard all over the charts with the FL Studio Fruity Fire Edition software, included with Fire. FL Studio is a complete software music production environment, the culmination of more than 20 years of innovative development. The software features everything you need in one package to compose, arrange, edit, mix and master professional quality music. With access to FL Studio's piano roll editor, step sequencer, playlist, VST instrument support, full automation functionality, plus 18+ virtual instruments and over a dozen built-in effects and processors, FL Studio Fruity Fire Edition provides the ultimate platform to spark that initial idea, ignite your creativity and complete your masterpiece - all in an ultra-intuitive, inspiring environment engineered to keep you tuned in to what's important, your music.

Pads: (64) Velocity-Sensitive RGB Backlit Pads

Knobs:
4 x 360 degree Assignable Touch-Capacitive Knobs
1 x 360 Encoder for Display Navigation

Buttons: 20 x Dedicated function buttons; Red, Amber or Green backlit
Display: OLED Display
Connections: 1 USB Type-B Port

SYSTEM REQUIREMENTS
Windows 7, 8, 10 or later
4GB of RAM or higher recommended
4GB free disk space
FL Studio 20.0.5 or later

Mac OS:
10.11 or later
4GB of RAM or higher recommended
4GB free disk space
FL Studio 20.0.5 or later

Notes: The new Akai Professional Fire represents the first of its kind, a dedicated hardware controller for the FL Studio Digital Audio Workstation (DAW) platform. Created in close partnership with Image-Line, Fire is a high-performance tool designed to enhance the workflow and music-creating experience for all FL Studio producers.

Fire features a dedicated browser function to navigate, audition and load your audio samples, recall project files and open plugins. Simply select browser and use the Select rotary encoder to preview and load content and devices within FL Studio - The graphical OLED display makes for easy browsing and controlling the various files, menus and parameters within your session a breeze.

Featuring plug-and-play integration, within seconds you'll be creating patterns and building tracks using Fire's 4 x 16 velocity-sensitive RGB pad matrix, designed for immediate interaction with FL Studio's celebrated step sequencer. Get hands-on with your production with everything you need to control FL Studio's channels and patterns. With direct hardware control over your session, you can easily mute and solo channels, expand the grid matrix, select new channels, navigate through patterns and much more without touching a mouse.

Get hands-on with your production with everything you need to control FL Studio's channels and patterns. With direct hardware control over your session, you can easily mute and solo channels, expand the grid matrix, select new channels, navigate through patterns and much more without touching a mouse.

From searing synth leads to lush pads, Fire's Note mode provides the ultimate platform to add melody and harmony to your production. Simply push the Note button and Fire's RGB pads switch-up to a MIDI keyboard giving you three octaves of note data, perfect for playing all of your instruments hosted in FL Studio.

Fire's pad matrix features an MPC-style 16-pad layout for seamless integration with FPC and SliceX. This is great for FL Studio producers who want a traditional beat-making experience or want to use their finger-drumming chops on the track.

Whether you're a studio producer refining an arrangement or live performer looking to take your sessions to the stage, Fire's Performance mode provides the ideal platform to remix and reimagine your tracks. Simply select Performance mode and launch MIDI clips and audio directly from Fire's RGB pad matrix for a truly inspiring live production experience.

Fire also provides immediate access to transport controls straight from the hardware. Record, Stop, Play, as well as a button to instantly switch between Pattern and Song mode are intuitively placed for mouse-free control of FL Studio. Plus, these all double up with secondary controls providing access to Loop Record, Countdown, Wait and Metronome.

Bringing a tactile, mouse-free mixing solution to the FL Studio environment, Fire includes 4 banks of 4 touch-capacitive knobs that enable the user to instantly see and adjust parameter values. Providing control over channel, mixer and user-assignable parameters, this enables a more intuitive and enjoyable workflow. From tweaking volume and pan within FL Studio's mixer to adjusting filter controls within the selected channel and recording automation, you'll spend less time clicking and more time executing.

Speed is power. Up to four Fire devices can be connected at once, enabling unprecedented hardware control over the FL Studio mixing and production workflow. Expand channels or make more in the sequencer accessible by selecting Multi-Device Mode from the OLED display. Instantly expand the 4 x16 matrix of one Fire unit to an 8 x 32 workflow.

Pads: (64) Velocity-Sensitive RGB Backlit Pads

Knobs:
4 x 360 degree Assignable Touch-Capacitive Knobs
1 x 360 Encoder for Display Navigation

Buttons: 20 x Dedicated function buttons; Red, Amber or Green backlit
Display: OLED Display
Connections: 1 USB Type-B Port

SYSTEM REQUIREMENTS
Windows:
Windows 7, 8, 10 or later
4GB of RAM or higher recommended
4GB free disk space
FL Studio 20.0.5 or later

Mac OS:
10.11 or later
4GB of RAM or higher recommended
4GB free disk space
FL Studio 20.0.5 or later

Notes: The Beautifier is a flexible OTA based filter, featuring a lowpass/bandpass switch and a selectable slope of 24db and 12dB. Two attenuated CV inputs for frequency cut-off and resonance. The filter self-oscillates at a given point and can be driven quite hard if you crank up the gain. All in all, a versatile analogue workhorse with a lot of character; from smooth and creamy to quite raw and screamy.

47 mA +12V
19 mA -12V
0 mA 5V
26 mm deep

Notes: Super-versatile dual digital delay in this all-round echo powerhouse. Analog, Tape, Digital, Modulation Delay and Verb modes give you all the options you need, plus a 40-second looper function for good measure.

Supplier's Notes:
Duo Time is a digital delay pedal with dual simultaneous delays, each with independent time and repeat settings. A choice of five very different sounding delay models include Analog, Tape, Digital, Modulation Delay and a unique shimmering Verb delay. A choice of fully independent stereo or mono signal paths are possible, with an option to process a mono input to separate stereo outputs with different delay settings. Controlled via an on/off foot switch and a Tap Tempo foot switch, which also functions as a toggle for the OLED display when held. Add to this versatility a full 40 second looper function and you may never need another delay pedal in your rig except this one.

Specifications:

Power supply: 9Vdc, 300mA (min) pin-negative (not included)
Controls: Level, Model, Parameter, Time 1+2, Repeat 1+2
Modes: Analog, Tape, Digital, Modulation, Verb
Delay time (seconds): Up to 1.8 seconds
Dimensions: 115 x 105 x 58mm
Weight: 440g

The box for this item contains :

Duo Time dual delay modeler pedal
Instruction manual

Notes: Expander module adds four more assignable CV inputs to Squid Salmple for advanced modulation and sample manipulation. A must for all Squid Salmple owners.

Supplier's Notes:
AXON-1 is a 4HP expander module for the SQUID SALMPLE that provides 4 additional freely assignable CV inputs.

The addition of AXON-1 brings Squid's total number of CV inputs to 7, greatly increasing the possibilities for vast modular sample manipulation.

Each modulation assignment includes digital attenuation and offset and behaves just like Squid's 3 built in CV inputs.

AXON-1 requires firmware 166 or later installed on the Squid Salmple to function!

Notes: Upgrade to Studio One 4 Professional from any prior version of Studio One Professional OR Producer!

There's a very good reason why so many musicians have switched to Studio One from older, more rigid programs. Built on a modern foundation that's not bogged down by legacy code, Studio One provides an efficient, creative companion from initial inspiration to final master. Its efficient, single-screen interface houses an unlimited number of tracks, intuitive editing tools, advanced virtual instruments, mastering, and video player- you spend your time creating music, not wondering what to click next. The 64-bit double-precision mix engine is state of the art, while the smooth, analog quality of the virtual instruments comes from proprietary techniques that provide much higher controller resolution. That's why Studio One just plain sounds better.

The reason why Studio One resonates with musicians is simple: PreSonus listens. Many new features in Version 4 are the direct result of user feedback, including AAF import/export so users can bring song data from their old DAW into Studio One. Add the most flexible arranging tools of any music program, full integration with Notion for superior notation, over 20 GB of carefully curated content, analog console emulation, advanced step sequencing, unified hardware control with the FaderPort series of hands-on controllers, and much moreiit's no wonder that Studio One continues to gain new followers every day.

Create Without Boundaries - Produce Without Limits

System Requirements:
Windows

Windows 7 (SP1 + platform update), Windows 8.1 or Windows 10 x64
Studio One 4 operates on 64-bit operating systems only.
Intelr Core Duo or AMD AthlonX2 processor (Intel Core 2 Duo or AMD Athlon X4 or better recommended)
4 GB RAM minimum (8 GB or more recommended)
Internet connection (needed for installation and activation)
Monitor with 1366 x 768 resolution (high-dpi monitor recommended)
A multi-touch enabled monitor is required for touch operation
40 GB hard-drive space
Mac

macOSr 10.11 or higher
Studio One 4 operates on 64-bit operating systems only.
Intelr CoreTM 2 Duo processor (Core i3 or better recommended)
4 GB RAM minimum (8 GB or more recommended)
Internet connection (needed for installation and activation)
Monitor with 1366 x 768 resolution (Retina display recommended)
A multi-touch enabled monitor with TUIO support is required for touch operation
40 GB hard-drive space

Notes: The Hungry Robot Sample & Hold provides basic S&H functionality with some added bells and whistles. It uses an internal clock dialed into a very useful range. If the internal clock rate is not to your liking, you can bypass the Rate knob by patching a clock signal into Clk In. The Sample & Hold has a built in attenuverter giving a bit of added control over the random voltages that are outputted. White noise out for uses elsewhere. Traditionally a S&H samples voltages from chaotic white noise, but E.In allows you to bypass the white noise and patch in your own sample source (i.e. patching an LFO in for a bit crushed LFO). As with all Hungry Robot "Modular Boxes" the Sample & Hold can be powered with a simple 9V DC, Negative Center power supply.

KNOBS
-MINUS/PLUS: Attenuverter for output. Allows you to sweep between positive and negative voltage outputs.
-RATE: On board clock source ranging from approximately 25ms to 1000ms.

PATCH POINTS
-E.IN: Bypasses internal white noise as a sample source. Patch in any CV source that you want to sample from
-STATIC: Taps into white noise output (0-5V range)
-CLK IN: Bypasses internal clock with your provided external clock
-S&H OUT: Two buffered outputs of S&H voltage

Dimensions: 4.7" x 2.6" x 1.5"
Power: 9V DC - Negative Center - 2.1mm Barrel

Notes: Lovely little mono filter module in a compact desktop format. Based on the classic Prophet 5 filter, ideal for processing synths and signals, hooking up to Eurorack or other Hungry Robot modules.

Supplier's Notes:

The Hungry Robot VCF is an all analog, 4-pole low pass filter with a self-oscillating resonance control. It is a close replication of the filter circuit found on the famous Prophet 5. It uses a HM2040 which is a high quality, faithful replication of the original SSM2040 chip. This resonant filter has a beautiful tonal quality. The over-sized knobs provide a satisfying tactile response. The cutoff frequency can be controlled by external control voltage. It has a built-in attenuator and invert switch for the incoming CV. CV input does not track at 1V/Oct, but is scaled to act as a VCA when a 5V signal is applied to CV input. As with all Hungry Robot "Modular Boxes" the VCF can be powered by a simple 9V DC, Negative Center power supply.

KNOBS
-FREQUENCY: Sweeps the cutoff frequency of the filter.
-CV: Attenuator for incoming CV input.
-RESONANCE: Sets resonance of filter. Small volume drop is to be expected. Will self-oscillate at higher settings.

SWITCHES
-INVERT: Inverts the incoming CV input. Toggle to the right to invert incoming CV

PATCH POINTS
-IN: Patch Audio Signal In
-CV: CV input for Frequency. Allows for CV control of this parameter.
-OUT: Patch Audio Signal Out

Dimensions: 4.7" x 2.6" x 1.5"
Power: 9V DC - Negative Center - 2.1mm Barrel

Notes: The Acapulco Gold is a dirt-simple distortion Device modeled after the sound of a cranked vintage Model T amplifier, bringing the openness, clarity, and crunch that only a dimed tube amp can provide, at a fraction of the size, and without expensive maintenance costs!

Since tone is in the hands, the controls of the Acapulco Gold are as simple as possible. The footswitch turns the pedal on and off, and the giant knob controls the output volume. That's it. The rest is at your fingertips. Want less gain? Turn down your guitar's volume knob. Need a darker rhythm tone? Roll back your guitar's tone control. Easy, right?

Big Knob: The big knob sets the output level, sometimes known as Volume. PLEASE BE CAREFUL, the Acapulco Gold is extremely loud!

With your guitar's volume all the way up, the Acapulco Gold roars like a wide-open Model T on the verge of explosion. At just-barely-backed-off, the Gold becomes a raunchy overdrive. At minimum guitar volume settings, the Acapulco Gold delivers a hazy, Nashville-sounding spank to your tone.

How about this? If your guitar has separate volume and tone controls for each pickup and a three-way selector switch, this little one-knob banger becomes a three-channel tone monster at the flick of your wrist!

This device is true bypass and uses electronic relay-based switching. Audio will not pass without power.

This device can be powered by a 9v battery or a standard 9-volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise.

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs

Current Draw: 18 mA

Notes: Open up your signal routing options with this neat and simple pedal. Split one signal into three, run effects in parallel, mix three signals together, set up ABY routing or set levels. Versatile.

Supplier's Notes:
The Signal Blender provides a number of parallel routing solutions through its use of a pair of send/returns, primary input and output, switching, and volume control.

Signal Blender can be used as a:
Parallel effect blender
3-to-1 mixer
1-to-3 splitter
Active ABY in either direction
Volume level setter

and more.

A courtesy 9V power outlet and phase correction switches for both Sends add further versatility to this box. Clever switching allows for latching or momentary on/off action.

The Signal Blender uses standard 9V center negative power, and has a current draw of 31 mA.

Notes: The Keeley Compressor is the most popular boutique compressor in the world.

The Keeley Compressor Plus is the first true advancement in Keeley's 2 and 4 knob compressor line. The new features are simple and straight forward. Now, there is a simple Release Switch that is tuned for single coils or humbuckers. No more wondering if you have the attack or release set right. Your humbuckers will have all the attack and punch that they should. The Tone Control was also added, which emphasizes the most sensitive harmonics that can be lost in compression. The Compressor Plus now sports a Blend Control that retains the peaks in your playing and, more importantly, the proper phasing of your guitar signal. The Keeley Compressor Plus offers the same gorgeous push of frequencies and sweetening of tone that the old comps gave you, now with the flexibility to easily handle any instrument.

The Keeley Compressor Plus is a compressor with an expander/sustainer. Not only does it act as a regular compressor, limiting the peaks in your playing, it adds more and more gain as notes fade out. Now you have sustain. Nothing worse than a note or a bend that has died before its time. The Keeley Compressor Plus adds just the right amount of sustain and expressive bloom to your notes.

The new Release Switch on the Keeley Compressor Plus is designed to make it very easy to transition between single coil and humbucker guitars. Humbuckers have more average energy than single coils which can cause compressors to stay in "compression mode" for a lot longer. When this happens, any series of notes you play will sound dull. With the quick release of the new Compressor Plus, your humbuckers remain true sounding, and each note retains dynamic attack and definition.

The Tone Control is Keeley's own design taken from analog delays and other vintage effects. Those effects used an emphasis circuit to recover treble and highs after they went through the BBD or other analog delay lines. That circuit was then taken and made it into a full fledged tone controll- it is the perfect way to gently add back in those highs lost in the compression process.

The Blend Control is a way of getting the peaks to come through while having sustain at the same time. So if you want sustain more than peak-limiting, this style of Manhattan Compression is for you! Keep all the peaks and transients with the Blend and Tone Controls while adding sustain on the back end. Heaven!

This compressor isn't just for heavy funk or chicken pickin' anymore.The new Compressor Plus is for players wanting a smooth, subtle wash from their guitar. Remove just the right amount of peaks for an ambient layer and then blend in the right amount of treble for a nice shimmer to your guitar. Use with your favorite fuzz to create a wall of tone like you've only heard on records. Looping has never been easier than with this compressor. Consider it an essential tool when creating loops that sound well-balanced. Forget it all and use the Compressor Plus for the best amp boost you've heard. Nothing pushes an amp better than the Keeley Compressor Plus.

Notes: The Nektar Impact GXP49 USB MIDI controller keyboard is designed for players: Experience 49 semi-weighted keys and instant access to performance controls including a real-time repeat engine, powerful Nektarine plugin patch management and Nektar DAW Integration. GXP gives you the keys to a great performance!

GXP Keys
PLAY - Treat your fingers to a dynamic semi-weighted keyboard with velocity and aftertouch that captures all aspects of your performances.

GXP Repeat Section
REPEAT - The Repeat Engine lets you create inspiring rhythmic elements with direct and intuitive realtime access from dedicated Repeat controls.

Impact GXP Transport
DAW CONTROL - Control essential DAW functions directly from Impact GXP using the dedicated transport controls. Supports 12 DAWs.

GXP Software Bundle
PRODUCE - All you need to create is included: Licenses for Steinberg's acclaimed Cubase LE Music Production Software and Retrologue virtual synthesizer.

KEYS: JUST THE RIGHT TOUCH
At the core of GXP49 is a newly designed and carefully balanced keyboard action. Its 49 semi-weighted full-size keys with velocity and aftertouch deliver a nice, firm touch and great playability.

Impact GXP 49 Front left view
Choose from 5 different velocity curves to tailor Impact GXP's keyboard sensitivity to your personal needs. The curves cover a wide dynamic range from soft to hard touch. The default curve "normal" is optimized to deliver good control across the whole velocity range right out of the box. In addition, 3 fixed levels let you send fixed velocity values across the whole keyboard if needed.

Nektar Impact GXP49 Control

DIRECT ACCESS: THE CONTROLS YOU NEED
The streamlined no-fuss control panel is based on the successful Nektar Impact GX-series, enabling advanced DAW integration with extended transport control, track selection and volume control as well as options to open/close DAW windows and navigate songs. In addition, GXP88's user interface also has 14 assignable illuminated RGB buttons for direct MIDI program- and bank-selection.

Impact GXP is a MIDI controller as well as a DAW controller:
If you use MIDI software that's not supported by Nektar DAW Integration, you can also set up MIDI control yourself. The assignable buttons in the transport section can be configured to send out Program message or MMC (MIDI Machine Control) transport control. In addition, any of the 28 assignable MIDI buttons, the modulation wheel, keyboard aftertouch, foot switches and of course the big control knob, can be assigned to send out MIDI cc messages. The settings are stored over power cycling.

GREAT CONNECTIVITY:
MIDI, PEDALS, POWER
The GXP49 gives keyboard players all the right expression options needed for live and studio work. It offers large pitch bend & modulation wheels and connections for up to 3 optional external pedals: Connect any standard expression pedal to the first, and any standard footswitch to the second socket. And if you use an optional Y-cable adapter, the footswitch socket even supports two independent switches.

Impact GXP Pedal Connections
Impact GXP Back Panel
Impact GXP can also be used stand-alone with external MIDI gear: The rear panel includes a 5-pin MIDI out jack and an external power supply socket for powering the unit when not connected via USB.

GXP Repeat Section 2

REPEAT: GET INSPIRED
The Repeat Engine is great for creating inspiring rhythmic elements: Simply press the dedicated Repeat button, play and get inspired.

The RGB buttons now give you direct one-button access to Repeat Rates, Accent, Interval, Swing and routing aftertouch or modulation to velocity. The large Data/Tempo Encoder turns into a dedicated tempo control, unless synchronization is set to external MIDI clock.

Choose from 5 different key trigger modes to change the repeat behaviour from interesting arpeggio-style effects with human feel to hard-quantized repetitive rhythms. Repeat is a fun way to experiment and create those famous "happy accidents", that make you come up with unexpected new ideas.

GXP Repeat Engine

NEKTAR DAW INTEGRATION: GIVE YOUR MOUSE A BREAK!
Install Nektar DAW Integration and the 8 buttons right above the wheels let you take control of essential tasks in your DAW right from Impact GXP. Features cover extended transport control including goto and set locators, track navigation, volume control, launching windows and patch navigation - without ever reaching for the mouse.