100% Sicheres Einkaufen

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Sicheres Einkaufen

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Tiptop Audio

View:
Options
Artikel 1 bis 42 von 42 auf Seite 1 von 1 anzeigen
Cat: 605238 Rel: 19 May 16
 
AC/DC Adapter for uZeus micro power supply
Notes: AC/DC Adapter for uZeus micro power supply
Read more
 2 in stock $25.86
Cat: 605240 Rel: 19 May 16
 
Brick style AC adapter for new Mantis cases & uZeus.Happy Ending kits
Notes: This brick style AC power adapter is made to power both the new Mantis cases and uZeus/Happy Ending Kits. When powering a uZeus, it will double the capacity of the uZeus +12V rail up to 2000mA. This is especially great for systems with digital modules that consume most of their current from the +12V rail. It is rated at 3000mA and is made with heavy gauge wire for better grounding and a specifically set output voltage that helps keep the uZeus cooler. It is a good option for users maxing out the standard adapter shipped with the Happy Ending Kit.

Please note, this item does not include an IEC cable or international alternative to an IEC cable
Read more
 1 in stock $33.96
Cat: 605241 Rel: 19 May 16
 
Brick type power supply for the Zeus Studio Bus
Notes: Brick type power supply for the Zeus Studio Bus
Read more
 1 in stock $58.21
Cat: 590416 Rel: 09 Nov 15
 
Analog bass drum snythesizer module - 4HP wide
Notes: Introducing the BD808, part of our new series of drum modules that brings analog percussion into the modular synth world, instantly turning your system into a self-contained music machine. Its small size, minimalist design, and modern production methods have allowed us to bring the world's most famous bass drum sound generator back at a very low cost. The real thing is here again.

The BD808 is the Roland TR-808's Bass Drum circuit adapted for use in Eurorack format and tuned to sound like a machine that comes fresh off the original 80's assembly line. The adaptation to modular format has allowed us to add some special features like independent Accent levels, a high-powered gain stage, dual-input pulse-shaper, and extended decay - all without compromising the signature sound of the TR-808.

A widely used technique with TR-808 machines is to run the drum sounds through outboard amplifiers to add gain and then pass the sound through just about anything to generate additional harmonics caused by clipping and distortion. In the BD808, we have already included this high-powered output gain stage capable of producing signals up to 20Vpp, extending from the original palette of sounds and allowing you to get an assorted array of harmonized bass drums ranging from sharp attacks to crushed tones using this simple yet effective technique! On the inputs, we have also designed a dual pulse-shaper circuit so you can trigger your BD808 with Trigger/Gate signals from step sequencers, clock dividers, or any other pulse/clock sources. This saves you the need to shape the pulses sent to the module and ensuring the same stable sound at its peak power, regardless of differences in your pulse source.

All these little, but unique, features make integrating this legendary sound generator into your modular easy, unleashing the power of real analog drums and making those speaker cones shake.
Read more
 1 in stock $100.80
Cat: 595782 Rel: 19 Jan 16
 
Percussion module based on sounds from a classic 909 - 8HP wide
Notes: Tiptop Audio Cymbal 909

The module was designed, tuned and tested to sound like the crash and ride sounds from a 909 fresh off the factory line. The sound circuits use a combination of low-fi 6 bit sound samples that pass through a series of analog elements that provide envelope and filtering to the source sound.
TipTop Audio enhanced the circuits by adding manual and voltage controllable tuning to each voice which result in a wide sound range: from hard industrial sound at the low end to the original crash/ride sounds to brilliant HihHts at high settings.

Like other TipTop drum voices also the Cymbl909 has high output level, allowing you to further enhance the sound by distortion and clipping. Play dynamically with the volume of the drum sounds with the Accent parameter, whose CV input is normalized to the gate input. Which means you just need to turn up the accent knob to play the sound with full punch.

Crash: tune CV input; gate input, normalized to accent CV input; Crash audio output
Ride: tune CV input; gate input, normalized to accent CV input; Ride audio output

60 mA +12V
40 mA -12V
0 mA 5V
8HP
Read more
 2 in stock $159.55
Cat: 646204 Rel: 30 May 17
 
Wave multiplier & sub-octave generator - 12HP
Notes: The Fold Processor is a voltage controlled wave multiplier and sub-octave generator. The circuit is based on a classic diode design that adds odd harmonics by folding the incoming signal, followed by subdivided square waves.

The wave folder creates new waveforms from the standard sine, triangle, sawtooth and square waves, has a dedicated output jack and CV input with an attenuator making it very easy to create beautifully animated folding sounds. Adjustable voltage controlled Inject alters the bias point creating an even wider palette of sounds.

The subdivide generator squares the fold output generating 4 more sounds spaced one octave apart, each with its own gain knob and mixed to the Subdivide output jack. Mixing the four can create anything from discordant square wave swarms to sweet harmonic oscillator stacks, from a stable square version of the folded wave to freaky PLL like glitched slides.

Overall results can sound evil at times and sweet at others, a true multi-faced devil.
Read more
 1 in stock $133.67
Cat: 595778 Rel: 19 Jan 16
 
Reverb Z-DSP cartridge featuring a collection of 8 Voltage-Controlled reverb algorithms for the Tiptop Audio Z-DSP module
Notes: The Tiptop Audio and Valhalla DSP 'Halls Of Valhalla' is a reverb Z-DSP cartridge featuring a collection of 8 Voltage-Controlled reverb algorithms for the Tiptop Audio Z-DSP module.

The cartridge contains 8 original reverb algorithms, custom designed for the Z-DSP and the Eurorack environment. Voltage-control over reverb decay, tone, and modulation allows the user to create reverbs ranging from small rooms to large halls to near-infinite decays. The reverbs in the Halls Of Valhalla are arranged in order of perceived size, from small to big to huge to uncomfortably enormous!

The Halls Of Valhalla brings the artifacts of fixed point digital signal processing to the forefront, resulting in a thickness and warmth that evokes the classic digital gear of the 1970s through the early 1990s. The goal of the algorithms is not to evoke physical environments, but rather to create unreal spaces that range from subtle to bombastic, from light to dark, with a lushness that turns simple input sounds into rich orchestral washes. The Halls Of Valhalla brings the Valhalla DSP aesthetics into the hardware world: Minimalist interface, Maximalist sound.

Features:
Program 1: Room
Program 2: Chamber
Program 3: Plate
Program 4: EnsembleVerb
Program 5: Cathedral
Program 6: Nilfheim
Program 7: Asgard
Program 8: Ginnungagap
Read more
 3 in stock $52.83
Tiptop Audio Happy Ending Kit (silver) (modular synth starter kit)
Cat: 590438 Rel: 10 Nov 15
 
Modular starter kit containing rails, rack ears and power supply
Notes: The Happy Ending Kit is an easy way to get everything needed to start a Eurorack modular system.

The Happy Ending Kit includes:
1 x Z-Rails set plus screws to attach to Z-Ears
1 x uZeus 4HP PSU with 2 x flying bus boards
1 x UK 3-pin mains adapter
Read more
 1 in stock $141.77
Cat: 590419 Rel: 09 Nov 15
 
Hi-hat percussion synth module made from the legendary TR-808's closed & open hi-hat circuits - 8HP wide
Notes: Introducing the HATS808, part of Tiptop Audio's new series of drum modules that bring analog percussion into the modular synth world, instantly turning your system into a self-contained music machine.

The HATS808 is the TR-808's real, analog closed and open hi-hat circuits adapted for use in Eurorack modular synthesizer format and tested to sound just like it did back in the 80's. Adapting to modular foramt has allowed Tiptop Audio to add some special features for each voice, like independent accent levels, a high-powered gain stage, and a dual-input pulse-shaper. Filter Q and VC-Q knobs were added to the main band-pass filter for additional tuning and to allow you to generate crushed tones and self-oscillation at the knob's max position - all without comprimising the signature sound of the TR-808 hi-hats.

The HATS808 sizzling sound is made using six analog square wave oscillators mixed and processed by band-pass filters. This multi-oscillator design is what give the 808 hi-hat sounds their unique metallic character and akes each HATS808 sound slightlty different from one-another. The original "choke" circuitry that makes it sound so dynamic and tight is fully implemented, just like the original, but can also be disabled if needed, by disconnecting the internal connection between the two hats.

Just like the other drums in this series, the HATS808 high-powered output gain stage allows you to further harmonize the sound using distortion and clipping. On each input, there is a dual pulse-shaper circuit so you can trigger your HATS808 with Trigger/Gate signals from step sequencers, clock dividers or any other pulse/clock sources. This eliminates the need to shape pulses sent to the module and ensures the same stable sound at peak power, regardless of your pulse source. All these unique features make integrating this legendary sound generator into your modular synth easy, unleashing the power of real analog drums.
Read more
 1 in stock $145.53
Cat: 590435 Rel: 09 Nov 15
 
Percussion synth module with TR-909's original closed and open hi-hats circuits adapted for use in Eurorack modular synthesiser format - 8HP wide
Notes: Introducing the HATS909, part of our new series of drum modules that brings those classic percussion sounds into the modular synth world, instantly turning your system into a self-contained music machine.

The HATS909 is the TR-909's original Closed and Open Hi-Hats circuits adapted for use in Eurorack modular synthesizer format and was tested to sound like a machine coming fresh off the assembly line back in the 80's Improving on the original, we have added some great new features that expand the sound palette of hats that can be produced with this small, powerful module.

The original TR-909 circuit is made with a combination of low-fi 6-bit sound samples that pass through a series of analog elements to provide envelope and filtering to the source sound. The HATS909 module allows for manual and voltage control of the sample's tuning, which provides anything from crushed hats and short ticks to the original sound and anything in between. A modulation switch allows you to tap a voltage control to either the tune input or the internal VCA for modulation with external control signals or for adding AM or FM synthesis in the audio range from external oscillators, other drum sounds, or just about any sound source. HATS909 also offers a switch for a direct tap to the output of the original sample, bypassing all other internal analog processing, giving you the pure source sound for synthesis any way you want with your own modules.

Just like the other drums in this series, the HATS909 high-powered output gain stage allows you to further harmonize the sound through distortion and clipping. On each gate input, we have designed a dual pulse-shaper circuit so you can trigger your HATS909 with trigger/gate signals from step sequencers, clock dividers, or any other pulse/clock sources.
Read more
 2 in stock $170.33
Cat: 590431 Rel: 09 Nov 15
 
Percussion synthesiser module with original TR-808 analog maracas drum voice and a white noise generator - 4HP wide
Notes: The MA808 is the TR-808's original analog Maracas drum voice and a white noise generator in Eurorack format. It's a low-cost module that brings back that classic sound, continuing to expand your Tiptop Audio modular drum machine.

The MA808 is a must have sound with its fluffy, harmonically rich presence that greatly enhances the dynamics of Hi Hats sounds in the groove. The Attack control knob can turn the sound from a sharp edged Hi Hat and up to a slow rise exponential attack Maracas sound; a dot on the scale indicates the original 808 set position. The MA808 also provides the continuous analog white noise generator of the 808 machine: a full spectrum of harmonics ideal for use as a starting point for patching your own drum sounds or for general use of white noise. The MA808 is an exact reproduction of the original circuit which sounds like a fresh machine coming off the assembly line back in the 80's.

Compatible with all the other drums in this series, the MA808 includes a hot modular level output gain stage. On the inputs, we have designed a dual-input pulse-shaper circuit so you can trigger the MA808 with trigger/gate signals from step sequencers, clock dividers, or any other pulse/clock sources. This eliminates the need to shape pulses sent to the module ensuring the same stable sound at peak power, regardless of your pulse source. These distinctive features make integrating this legendary sound generator into your modular synth easy, unleashing the power of real analog drums.
Read more
 1 in stock $90.55
Cat: 693139 Rel: 02 Jul 18
 
Delay/reverb expansion card for the TipTop Audio Z-DSP Digital Signal Processor
Notes: Mariana Trench is an FDN card for the Z-DSP. Feedback Delay Networks (FDNs) are built around multiple delays which are connected to their inputs thanks to a feedback matrix designed for its stability and lossless properties. FDN can mimic the recursive process of sound waves bouncing back and forth in an acoustic space. They were first suggested for artificial reverberation by Michael Gerzon (1971) and later John Stautner and Miller Puckette (1982) introduced four-channel FDN reverberator with general stability conditions.

FDN can also be used as a special case of digital waveguides, they can be tuned, or also used as complex delays. The Mariana Trench Z-DSP cartridge is designed to explore these more unusual sides of the FDN algorithms. Mariana Trench Z-DSP cartridge is designed by Christophe Duquesne Anckorage - Haken Audio developement team - La Voix du Luthier.
Read more
 3 in stock $68.99
Cat: 725794 Rel: 15 Apr 19
 
10HP Eurorack CV modulator module
Notes: MISO is a multipurpose utility module, a laboratory for synthesizing control voltage signals and audio. MISO combines multiple CV tools into one module for making complex CV shapes at the output stage. The name comes from the four main functions available: Mix, Invert, Scale, and Offset.

MISO's 2 sections (1/2 IN and A/B IN) are identical. Each section has two inputs that can be used to Mix signals, Invert polarity/shape, Scale magnitude and Offset voltage. Each function can be used independently or simultaneously with the total shape summed to the mix output.

At the centre of the module is another processor, an accurate smooth linear voltage-controlled crossfader that mixes equally between the outputs of the top and the bottom MISO sections. Feed the MISOs with envelopes, LFOs, Sequences to create new shapes and then crossfade them manually or with CV using the centre section for even further complexity of shapes and animation of control signals. Crossfade between the waveforms of a VCO or audio samples with CV for more motion.

There are an endless number of ways to patch MISO with unexpected and inspiring results. MISO is the kind of module that gives modular synthesizers its incredible replay value, rewarding hours of creative explorations and its experimental and non-traditional mixing.

MISO offers a lot in a small comfortable module that matches Tiptop's system look with clean white faceplate styling. A red/yellow indicator light next to each section makes it easy to see signals and visualize polarity.
Read more
 2 in stock $85.16
Cat: 708032 Rel: 29 Oct 18
 
Seven channel mixer with classic analogue sound - 3HP
Notes: MIX7 is a seven channel analogue summing mixer module for Eurorack. It is designed for summing any of the different types of signals you'll find in a modular system: Audio, CV, Triggers, or Gate.

MIX7 gives ability to sweeten your mix with more headroom using the power of low noise analogue summing. A compact 3HP Eurorack utility module, MIX7 is an attractive mixing addition to any rig, especially with the ability to also combine rhythms, note patterns or CV automations from different control sources. The main output of one section can be connected to the input of another MIX7 to create larger mixing groups and complex signal routes inside your modular.

The MIX7 summing mixing circuit is built with low-noise operational amplifiers, giving it an excellent sound quality for mixing audio, the beautiful texture of classic analogue mixing with plenty of headroom to handle hot modular signals, and the versatility to sum non-audio signals in your system to open up new creative possibilities.

Each input is labelled with a number of dots, 1-7, yellow for input and green for output. The module matches Tiptop's system look with clean white faceplate styling.

At the back of the module is a user-configurable jumper allowing users to configure the MIX7 for either unity gain (OUT = IN) or give increased headroom (OUT = 0.4IN) for use with hot audio signals, which makes it a great pairing for Tiptop Audio percussive modules. A peak indicator light on the front panel warns the user of even the slightest audio clipping in the mix, helping to keep all the incoming sound sources at their full original quality.
Read more
 3 in stock $85.16
Cat: 718720 Rel: 29 Oct 18
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


MIX7 is a seven channel analogue summing mixer module for Eurorack. It is designed for summing any of the different types of signals you'll find in a modular system: Audio, CV, Triggers, or Gate.

MIX7 gives ability to sweeten your mix with more headroom using the power of low noise analogue summing. A compact 3HP Eurorack utility module, MIX7 is an attractive mixing addition to any rig, especially with the ability to also combine rhythms, note patterns or CV automations from different control sources. The main output of one section can be connected to the input of another MIX7 to create larger mixing groups and complex signal routes inside your modular.

The MIX7 summing mixing circuit is built with low-noise operational amplifiers, giving it an excellent sound quality for mixing audio, the beautiful texture of classic analogue mixing with plenty of headroom to handle hot modular signals, and the versatility to sum non-audio signals in your system to open up new creative possibilities.

Each input is labelled with a number of dots, 1-7, yellow for input and green for output. The module matches Tiptop's system look with clean white faceplate styling.

At the back of the module is a user-configurable jumper allowing users to configure the MIX7 for either unity gain (OUT = IN) or give increased headroom (OUT = 0.4IN) for use with hot audio signals, which makes it a great pairing for Tiptop Audio percussive modules. A peak indicator light on the front panel warns the user of even the slightest audio clipping in the mix, helping to keep all the incoming sound sources at their full original quality.
Read more
 1 in stock $88.32
Cat: 641102 Rel: 27 Feb 17
 
24bit, 96k 4HP mono sample player
Notes: ONE brings organic sound and super low latency sample playback to the modular. It differs from other sample players in that it handles the digital audio bits as a continuously manipulated electrical flow, a feature inspired by our analog knowhow. This unique core makes ONE truly integral within the Tiptop percussive modular ecosystem thanks to a lightweight and responsive digital circuit with a very analog feel.

ONE brings a world of colours to the modular right out of the package. We have invited some of the best sound designers in the Industry to create professional sound libraries with content tailored to the unique sonic framework of the modular synthesizer and that fully takes advantage of ONE's unique qualities. To start with, ONE comes with a SD card loaded with a free set of 60 sounds designed by Glitchmachines. More cards are available to purchase separately each containing carefully selected material with up to 256 sound files. Using your own sample libraries or recordings is easy too, just copy 16 or 24bit mono WAV files onto the SD card, pop the card into ONE and go.

ONE offers several modes of operation, with the primary being the super low latency Trigger mode that retrieves audio data off the SD card adding no artificial processing such as click removal, crossfading, EQ or gain normalization. In this mode, it's a highly transparent player up to 24 bit 96kHz with no interpolation of the audio data: what you put in is what you get out. With a delay as low as 0.25ms from the moment the trigger hits, ONE offers harmonically dense, clear and detailed audio with a great rhythmic feel.

ONE handles external CV through a user selectable multifunction jack. Pitch is the main control with two modes available: Free pitch allows for fine tuning of the playback rate, great for adding subtle vibrato or wild tape speed effects; Quantized pitch maps CV to the standard 12 tone system over 3.5 octaves and is ideal for melodic content. CV can also be used to sequence through files off the SD card allowing far more varied sounds from a single source; almost like an entire percussion section behind the slim panel.

Although originally designed to play tightly with our analog drums and envelopes, ONE's rich sound quality encouraged us to make it work in a variety of other applications that are less demanding of sub millisecond timing response. The extra headroom at the core level allows features such as Gated playback, Looping, and Triggering with fades in and out to accommodate different types of sound sources from drum loops to polysynth chords to noise sources and other yet unimagined uses.

ONE offers another useful dimension since it can play CV signals too. Drop in a card with LFO signals, random CV, slopes and envelopes for a whole set of new control and modulation possibilities.

ONE is as simple to use as it is affordable and plays extremely well with its analog cousins - our vision for bringing samples into the modular world.
Read more
 4 in stock $157.39
Cat: 634778 Rel: 06 Feb 17
 
Digital processor with high precision analog CV circuitry
Notes: QuantiZer is a creative melody composing module that uses cutting edge analog electronics and DSP to tune analog VCOs precisely into Western musical scales. The front panel is packed with functions that makes it very playable and intuitive to use, with a layout that moves forward from the typical quantizer design. At its centre is a slider that can be set to play notes, add Portamento to an incoming sequence, transpose a sequence with in an octave range or transpose a sequence within 5 octave range. The 12 note keyboard can be set to play notes manually, add and subtract notes from scales, transpose a sequence as well as setup a variety of settings that define the quantizer behaviour and sync with other modules.

Major and Minor keys are both built in to let you switch scales in a very playable way, making it pretty easy to explore musical progression. There are also 24 user scales ready to be filled up with your own custom scales. A built in sketch pad records and plays back keys entered manually on the keyboard and slider in sync with external clock and reset signal, or Tiptop's SyncBus which chains the QuantiZer recording function to the Circadian Rhythms time line for precise recording and playback. Scale CV in can be set to switch between changing scales or transposing pitches using CV from sequencers. Quantization can be set for free run or Trigger mode for even more interesting ways to interact with external sequencers.

Quantizer sets a new performance standard for Eurorack that offers incredibly stable CV quantization minimizing glitches on input, utilizes high precision temperature compensated 1V/Oct CV generation on output and features stunning conversion latency of less than half a millisecond. QuantiZer can be set to process a wide variety of CV voltage input ranges, +/-5V CV from LFOs, bi-polar envelopes and such, or 0-10V / 0-5V standard CV from sequencers. Continuing the tradition of advanced Tiptop digital modules, the QuantiZer Firmware running the digital brain is upgradeable via a USB thumb drive interface at its back allowing for continuous improvement and fine tuning of function and stability over time.
Read more
 1 in stock $256.58
Cat: 618527 Rel: 03 Aug 16
 
Rimshot drum module based on voice from legendary TR-909 - 4HP wide
Notes: Another voice from the legendary TR-909 in Tiptop audio's product portfolio is this Rimshot. Its two oscillators can be tuned, unlike on the original.

Details:
As every drum module from Tiptop Audio also the RS909 has a gate input which is normalized to the accent input, making possible to play the drum with full power without the need to patch a lot.. Of course the accent input's intensity can be controlled as well as the output level of the module.

The rimshot sound is generated by two oscillators which in the original TR-909 were tuned to fixed frequencies. This limitation was omitted by Tiptop Audio as they equipped the module with two frequency potentiometers for detuning the oscillators. The original settings of the 909 are marked with black dots.
Read more
 1 in stock $63.61
Cat: 590417 Rel: 09 Nov 15
 
Snare drum module made from the TR808's circuit adapted for Eurorack use - 4HP wide
Notes: Introducing the SD808, part of our new series of drum modules that brings analog percussion to the modular synth world, instantly turning your system into a self-contained music machine.

The SD808 is the TR-808's analog snare drum circuit adapted for use in Eurorack modular synthesizer format and was designed to sound like a fresh-out-of-the-box, 1980s TR-808 snare. Adapting the circuit to the modular format has allowed us to add special features like independent accent levels, a high-powered gain stage, a dual-input pulse-shaper, and an adjustable noise source - all without compromising the signature sound of the TR-808 snare drum.

The SD808 sounds tight and extremely snappy because it's analog - the real thing, not samples. The sound is made with three analog sound generators mixed together: two oscillating sine waves and a noise source. The SD808's front panel controls have a lot of sweet spots with sounds that are not just limited to snare drum sounds; it can also create other electronic percussive elements.

The noise source generator in the original TR-808 machines were revised in later production batches, resulting in variations in sound across the production run. The SD808 uses this later, revised circuit to create a snare drum hit that is slightly darker, has more body, and is more realistic. Just like other drums in this series, the SD808 includes a high-powered output gain stage capable of producing signals up to 20Vpp, allowing you to get an array of harmonized snare drums sounds with even tighter attacks. On the inputs, we have designed a dual-input pulse-shaper circuit so you can trigger the SD808 with Trigger/Gate signals from step sequencers, clock dividers, or any other pulse/clock sources. This eliminates the need to shape pulses sent to the module and ensures the same stable sound at peak power, regardless of your pulse source. All these unique features make integrating this legendary sound generator into your modular synth easy, unleashing the power of real analog drums.
Read more
 2 in stock $107.80
Cat: 658617 Rel: 13 Sep 17
 
Snare drum module in Eurorack format - 8HP
Notes: The SD909 adapts the iconic TR-909 snare drum and noise generator for use in the Eurorack modular synthesizer format. We painstakingly tested the module in our lab to sound like a fresh machine coming off of the assembly line back in the 80s. On top of the original circuit, we have added new features that expand the palette of what can be produced with this analog circuit.

The sound of the SD909 consists of two main sections: the binary noise generator and two modulated triangle oscillators. The oscillators provide the low end punch while the noise makes up the upper sonic spectrum, resulting in a combination that makes the 909 snare sound so rich. In the SD909 module the noise generator and oscillators are variable and voltage controlled, which pushes the circuit beyond its original boundaries offering new sounds as well as many variations of the original tone. The panel has markings to guide setting the knobs to reproduce the snare sound of the vintage machine.

Just like the other drums in this series, the SD909’s high-powered output gain stage allows further enhancement of the sound through distortion and clipping. We have designed a dual pulse-shaper circuit on each gate input so you can trigger your SD909 with Trigger/Gate signals from step sequencers, clock dividers, or any other pulse/clock sources. Also, the SD909 is equipped with access to the MIXZ MixBus matching the rest of the Tiptop line of percussive modules.
Read more
 2 in stock $159.55
Cat: 595791 Rel: 19 Jan 16
 
Stackable patch cable
Notes: The TipTop Audio Stackcables allow you to stack your cables to give you complex signal flows with greater visibility
Read more
 1 in stock $9.16
Cat: 595783 Rel: 19 Jan 16
 
Stackable patch cable
Notes: The TipTop Audio Stackcables allow you to stack your cables to give you complex signal flows with greater visibility
Read more
 More than 10 in stock $6.46
Cat: 595787 Rel: 19 Jan 16
 
Stackable patch cable
Notes: The TipTop Audio Stackcables allow you to stack your cables to give you complex signal flows with greater visibility
Read more
 More than 10 in stock $6.46
Cat: 595790 Rel: 19 Jan 16
 
Stackable patch cable
Notes: The TipTop Audio Stackcables allow you to stack your cables to give you complex signal flows with greater visibility
Read more
 4 in stock $6.46
FORTHCOMING
Tiptop Audio STRIKE Acoustic Percussion Card For One Sample Player Module
coming soon $TBA
Cat: 693138 Rel: 02 Jul 18
 
FX expansion card bundle for ZDSP digital effects processor
Notes: The Time Domain Bundle is all about rich delay effects. The package consists of three Z-DSP cards with eight algorithms each. Modulated Delays specializes in animated echo programs, which can be used to create, for instance, diffusion, chorus or pan effects. Hydra provides multi-tap algorithms. These can be used to generate rhythmical delays. Spiral combines a pitch shifter and a multi-tap echo to create atmospheric to slightly psychedelic effects.

Mod Delay:

Modulated Delays brings various forms of animation to the delay lines. These types of algorithms further extend the signal path of delay effects with extra processing and routing of the audio signal. The sonic results put the Mod Delay effects in a category of their own.

Each program adds different processing like diffusion, chorus, panning and other modulation to the basic mono or dual delay line structure. The two Modulator programs are intended for use with external CV - opening up vast modulation possibilities of the modular synthesiser. Each card comes loaded with 8 presets.

Hydra:

Hydra is the multi-armed DSP creature tapping its tentacles into a buffered delay line and creating a range of multi-tap delay rhythmic and spatial effects. The Spread parameter sweeping through rhythmic variations allowing some of the programs bridge the gap between single delays and reverbs by using diffusion while others use taps to create rhythmic patterns.

The basic Hydra algorithm sums the inputs to mono and writes the signal to a single delay line. Multiple output taps are taken from the delay line and spread across the stereo outputs. Each program adds additional features like panning, filtering, pitch shifting and/or diffusion to create a unique Z-DSP Hydra experience. The last two programs add external Clock input for more precise sync to the beat.

Spirals:

Spirals is a pitch and multi-tap delay card for the Z-DSP. This card uses numerous multi-tap delay techniques in combination with dual pitch shifters to create a wide range of harmonizing choruses, echo and harmonic reverb sounds. Programs on this card derive from the complex algorithms found on high-end studio effects processors, which, while powerful, have a complex editing process. On the Z-DSP all of the power of the internal code is controlled by three simple adjustments for sculpting the sound - making the experience more about performance and live tweaking rather than navigating through dozens of menu pages.
Read more
 4 in stock $76.53
Click for better price!
quote 693138
Cat: 590408 Rel: 19 Jan 16
 
Trigger sequencer
Notes: From a conceptual view, the Trigger Riot generates 16 clock streams consisting of multiple time manipulation functions (division, offsets, etc) that interact to create the trigger output, and direct access to each parameter via individual knobs allows for quick manipulation. The 8 outputs are the sum of those manipulated streams per row. The outputs of the module are arranged as either a 4x4 matrix, where each of the 16 knobs affects both row and column, or as a set of independent outputs for each row or column. This allows forming 8 complex musical interactions in a 'Matrix' mode or 8 independent streams in 'Independent' mode and is switchable from one to the other on press of a button for some unexpected results.

Since each of the 16 knobs represents a real time tweakable trigger generator/modifier the Trigger Riot is extremely playable and can result very complex patterns with only few knob turns; patterns that would otherwise take much longer and in some instances be almost impossible to produce using grid based step sequencing. Patterns can have unique time signatures that can repeat or be randomized through probability, time shifted and phased, divided, multiplied and counted, it's unbelievable how complex this module can get with minimal input.
Read more
 1 in stock $422.60
Cat: 601462 Rel: 05 Apr 16
 
Reverb cartridge for TipTop Audio Z-DSP with 8 original algorithms
Notes: The Z-DSP Shimmer cartridge has 8 original algorithms, designed to combine lush reverberation with multiple voices of pitch shifting, to create ethereal pads, rich chordal textures, dissonant clouds of sound, and a variety of other sounds that are perfect for electronic music. The algorithms are customized to work with the Tiptop Audio Z-DSP Eurorack module.

There are 6 reverb algorithms in the Z-DSP Shimmer cart, arranged in order of complexity:
- Fast Shimmer: A modulated reverb that quickly decays away into an endlessly pitch shifting tail. The shift interval can be set between +/- 12 semitones. Perfect for that classic "octave up" shimmer sound.
- Slow Shimmer: Similar to Fast Shimmer, but with a much slower attack.
- Dual Shimmer: Two pitch shifted voices, embedded within a larger modulated reverb network, shifting the reverb decay in both positive and negative directions. Try slowly sweeping the Shift control in this mode for ridiculously cinematic sounds.
- Triple Shimmer: Two pitch shifted voices embedded within the reverb decay network, plus a third voice external to the network. This allows the user to have a reverb with +12 and -12 semitones of feedback, plus a stable +7 semitones voice without feedback.
- Quad Shimmer: Four pitch shifted voices feeding into a lush modulated reverb. This allows for a variety of dissonant and consonant chordal textures, with the max Shift setting corresponding to a rich major chord.
- ClusterVerb: Four pitch shifted voices embedded within the feedback network of a modulated reverb. The result quickly becomes dissonant or metallic. Perfect for insta-Ligeti, or Penderecki In A Box.

In addition, the Z-DSP Shimmer cart features 2 special effects algorithms:
- Quad Detune: 4 short pitch shifted delays, feeding back on each other. A variety of chorus, detuned, and dissonant effects can be obtained through this mode. Turn up the Feedback for maximum fun.
- PitchEcho: A single pitch shifting voice, combined with a tape echo emulation = sound mangling joy. Turn up the feedback for barberpole self-oscillation, and sweep the decay time for all sorts of swoopy glitches.
Read more
 3 in stock $66.83
Cat: 717728 Rel: 25 Jan 19
 
Precision calibrated analogue VCA - 4HP
Notes: The Tiptop Audio VCA is a full featured, precision calibrated, analogue Voltage Controlled Amplifier. At its heart is a novel design of a control circuitry - a function that lets you sweep continuously through three different response curves: Logarithmic, Linear, Exponential - giving you all three shapes in a single module. This special control circuitry design by Mr. Osamu Hoshuyama was adopted into the VCA module to make it a great sounding synthesizer VCA with flexibility to address all duties: level control for both audio and CV modulation, gating audio into silence, and amplitude modulation effects.

A VCA, Voltage Controlled Amplifier, sometimes referred to as an audio gate, is an essential module to any Eurorack and no system is complete without one. The concept is an input, an output and a control that sets how much of the input signal passes through to the output.

A great VCA means minimum feedthrough of the control signal bleeding into the passing signal and minimum distortion applied to the passing signal. An excellent audio gate means minimal leakage of signal from IN to OUT when the control tells the VCA to fully close. These are the most critical conditions for a good sounding, good responding VCA and are what the Tiptop Audio design carefully addresses. 2 LED peak indicator lights on the front panel light up with incoming CV or audio signals. While a clipping indicator for audio is expected, clipping of CV is often overlooked and it's included here to visually maintain the full dynamic range of an envelope driving the VCA.

The Tiptop Audio VCA lets you concentrate on creative uses rather than figuring out the module's anomalies. The result is an excellent sounding synthesizer VCA that's a joy to use and pleasing to hear.
Read more
 2 in stock $114.27
Click for better price!
quote 717728
Cat: 595808 Rel: 19 Jan 16
 
3U rack ears for use as either tabletop or rack mount frame
Notes: The Z-Ears Tabletop are standard 3U rack ears that can be used as either a tabletop frame or standard rack mount frame. These parts are made of anodized aluminium and are custom made to work with Eurorack mounting rails like Z-Rails.
Read more
 2 in stock $25.86
Cat: 595807 Rel: 19 Jan 16
 
3U rack ears for use as either tabletop or rack mount frame
Notes: The Z-Ears Tabletop are standard 3U rack ears that can be used as either a tabletop frame or standard rack mount frame. These parts are made of anodized aluminium and are custom made to work with Eurorack mounting rails like Z-Rails.
Read more
 2 in stock $23.18
Cat: 595801 Rel: 19 Jan 16
 
Mounting rails for Eurorack modular synthesiser format - 104HP
Notes: Z-Rails are mounting rails for the Eurorack modular synthesizer format and are designed to be used for professional and DIY case mounting assemblies.

Z-Rails are sold in sets of two (2) aluminium, clear or black anodized rails, each containing a nickel-plated brass threaded strip with 3mm threads using 5.08mm spacing. The racks are easy to install into any frame using two (2) M4 screws, one for each side of the individual Z-Rails.
Read more
 2 in stock $46.63
Cat: 595802 Rel: 19 Jan 16
 
Mounting rails for Eurorack modular synthesiser format - 126HP
Notes: Z-Rails are mounting rails for the Eurorack modular synthesizer format and are designed to be used for professional and DIY case mounting assemblies.

Z-Rails are sold in sets of two (2) aluminium, clear or black anodized rails, each containing a nickel-plated brass threaded strip with 3mm threads using 5.08mm spacing. The racks are easy to install into any frame using two (2) M4 screws, one for each side of the individual Z-Rails.
Read more
 2 in stock $58.21
Click for better price!
quote 595802
Cat: 595805 Rel: 19 Jan 16
 
Mounting rails for Eurorack modular synthesiser format - 168HP
Notes: Z-Rails are mounting rails for the Eurorack modular synthesizer format and are designed to be used for professional and DIY case mounting assemblies.

Z-Rails are sold in sets of two (2) aluminium, clear or black anodized rails, each containing a nickel-plated brass threaded strip with 3mm threads using 5.08mm spacing. The racks are easy to install into any frame using two (2) M4 screws, one for each side of the individual Z-Rails.
Read more
 1 in stock $83.00
Click for better price!
quote 595805
FORTHCOMING
Tiptop Audio Z Rails Brackets For Attaching Z Rails To Wood Cases (pair, silver)
coming soon $TBA
Cat: 590405 Rel: 09 Nov 15
 
Analog voltage controlled oscillator synth module - 14HP wide
Notes: The Z3000 is an all-analog, voltage-controlled oscillator that gives you the ability to implement synthesis techniques in a controlled and planned manner, turning your modular system into an even more powerful musical instrument.

The Z3000 is bilingual - equally fluent in the language of sound (frequency) and music (notes and octaves). Its intelligence comes from its built-in arithmetic processor, which allows for relevant data to be displayed constantly, taking the guesswork out of tuning your modular.

The 73000's analog core generates four waveforms with substantial character, giving you the sound signature that can only be created by a true analog VCO. The Z3000 unique circuitry allows for high levels of synthesis complexity such as frequency modulation, all while maintaining excellent wide-range tracking and without falling into chaos. The Z3000 brings a world of new possibilities that will give rise to a whole new sound spectra within your modular synthesizer.
Read more
 1 in stock $226.39
Cat: 696915 Rel: 27 Jul 18
 
8HP voltage-controlled ADSR envelope with CV processor - 'New Style'
Notes: The Z4000 NS is a snappy voltage-controlled analogue envelope generator with a built-in CV processor for scaling, inverting, and voltage-controlled deviating of the envelope shape. The Z4000 generates an envelope made of the four classic segments: Attack, Decay, Sustain and Release, in which each segment can be manually set using knobs or dynamically set under voltage control.

Control knobs for the Attack, Decay, and Release segments are scaled. The first 0-50% of the knobs rotation is dedicated to high resolution adjustment in the millisecond range.

The output levels are fully adjustable with signals that can reach up to 10V in either polarity and can be mirrored into the opposite polarity or clipped using the voltage-controlled deviater-scaler. A bi-colour LED indicates intermediate values in both polarities and their crossfade state.

The Attack slope switch allows selection of a logarithmic or exponential curve for the Attack segment. This subtle effect helps further the fine adjustment of the Attack segment slope. A Shoot button is provided to let you fire the envelope manually. The Z4000 also provides a retrigger input allowing you to create legato notes when using a classic keyboard interface.

Going down to nuts and bolts, the Z4000's smoothness and snappiness is made possible by a four-segment active-charge discrete circuit which is an extended version of circuits found in classic two-segment rise/fall transient generators.
Read more
 2 in stock $175.72
Click for better price!
quote 696915
Cat: 590406 Rel: 10 Nov 15
 
Matric sequencer synth module - 28HP wide
Notes: The Z8000 Matrix Sequencer is a powerful modulation source in a compact package. The 16 knobs of the Z8000 are accessed by ten sequencers each with their own clock, direction and reset inputs. The ten sequencers are as follows:

- Four 4-step CV sequencers on the horizontal.
- Four 4-step CV sequencers on the vertical.
- One 16-step CV sequencer on the horizontal.
- One 16-step CV sequencer on the vertical.

With the Z8000, you can simultaneously modulate many parameters in your synthesizer polyrhythmically, with unprecedented motion. One knob affects all 10 CV outputs! Imagine modifying 10 parameters from one knob, and all clock inputs can be driven at audio rates.

Your synthesizer is modular, so your sequencer should be too. The Z8000's open design allows you to create a custom sequencing environment to fit your personal needs. Add clock dividers, clock sequencers, switches, trigger sequencers and logic gates to create a completely unique system.
Read more
 3 in stock $313.71
Cat: 688915 Rel: 25 Jun 18
 
Open-source, cartridge-based, digital sound processing & generating platform
Notes: Tiptop Audio's Z-DSP is a cartridge-based open source digital sound processing and effects generating platform for your modular synthesizer. Lush audio processing, greater stereo depth and a unique set of digital synthesis is what the Z-DSP is all about.

The Z-DSP has a stereo digital sound processor with 24-bit sampling, 15kHz of bandwidth, voltage-controlled parameters of stereo feedback, program switching, DSP parameters, equal power crossfading dry/wet mixing, as well as sequential program control switching and a clear display - all in Eurorack format. A dedicated clocking input for the DSP chip does wonders to passing sound by bending the algorithms in an unexpected way, a hardware technique computer plugins can't do and is unique to the Z-DSP.

In a recent update, the Z-DSP (NS) got an all new design of its analogue circuitry, contributing to a lower noise signal path, clearer sound of the entire frequency range, lower distortion and better immunity to noise emitted by other modules sharing the same power supply. A new analogue dry/wet circuit has been implemented to remove the 3db gain drop when the mix knob passes through the centre of the dial making the use of this function more practical in a live application. A reverse polarity protection has been added as well. The new front-panel matches Tiptop's colourful design, and a single printed circuit board and surface mount technology improve reliability during production and use. The powerful Z-DSP engine remains the same as the original Z-DSP module and all cards are compatible across both versions.

An assortment of interchangeable cards, programmed by Tiptop Audio and specialists like Valhalla DSP, provide a wide range of boutique effects algorithms such as Halls of Valhalla, Time Fabric, Clocked Delays and Grain De Folie. Tiptop Audio also offers blank Z-DSP cartridges and a development tool called NumberZ for developers, students and power users who want to design their own effects and cards with the FV-1 DSP chip programming language. Blank cards can be loaded using programs that are freely available for non-commercial use and can be found in the modular community through online forums. With each card swap, the Z-DSP takes on new effect algorithms, changing like a digital chameleon and bringing colourful digital effects processing to your Eurorack setup.

The Z-DSP comes included with 2 cards: Halls of Valhalla and Dragonfly Delay MKII.
Read more
 1 in stock $401.04
Cat: 595820 Rel: 03 Aug 16
 
Links up to 3 Zeus Studio Bus boards with an external power supply - 4HP wide
Notes: Zeus Access provides a simple, fast, and cost-effective solution for linking up to three Zeus Studio Bus boards with an external Cincon-TTA brick-style power supply. It is a tethered 4HP space-saving front panel with a long lasting high power rating On/Off switch and power socket.

It comes fully assembled and wired with 16AWG wire and plated copper terminals leads that require no additional assembly or special tools for connecting to a Zeus Studio Bus board.
Read more
 2 in stock $30.99
Cat: 595824 Rel: 19 Jan 16
 
Power supply for Eurorack synth module systems, with guaranteed low noise and minimal bleed between modules
Notes: The Zeus Studio Bus is Tiptop Audio's next generation of the Zeus Eurorack power system and is the world's only high-power system that can guarantee low noise with minimal bleed-through between modules for a clear sounding synth. The power supply is the backbone of your modular system and will define how well it all works; this is not some simple circuit that flashes LEDs on but is a complex analog circuit, not something you want to chance with the various boutique power supplies.

The Zeus SB takes the next step to simplify wiring up power into cases that scale from a simple 3U row to complete walls of modular synthesizers, all done without dealing with hot AC power lines. The Zeus system comprises of an external brick Cincon-TTA power supply, Zeus Access and a Zeus Studio Bus, providing everything needed for a DIY or a professional Eurorack case. The Zeus Studio Bus board is equipped with fourteen Eurorack standard power connectors and two AS power connectors. Connecting wires to and from the board is done using a spring action connector, no special tools are needed, all it takes is to push the lever down and insert the wire. The spring action connector provides multiple points of connection allowing for different types of power configurations, starting with simple daisy chains and up to professional multi-thread star wiring. At the heart of the Zeus SB is our new design of discrete linear power regulators, aimed at providing robust, Low noise studio-grade power to deal with today's growing challenge of a great selection of modules from many different manufacturers that must share the same power bus. And with an eye towards the future, the Zeus SB prepares you for the new wave of high-current digital modules and the upcoming Tiptop Audio Analog Polyphonic system.
Read more
 1 in stock $117.51
Cat: 658619 Rel: 13 Sep 17
 
SD card for the ONE modular synth module
Notes: DOTS features 256 short/dots one shot sounds created specifically for ONE to further extend ZV_K's live Tiptop drum setup. These sounds were selected for their percussive transient response but are also great as monophonic sound sources to use alongside analog synth when sequenced. DOTS are samples of the signature sounds of Buchla, Cwejman, Mutable Instruments, Jomox, Mungo, Industrial Music Electronics (aka The Harvestman), HexInverter, Make Noise, Monomachine, Vermona, Audio Damage. Bastl, Epoch, Mungo, Delptronics as well as some human voice artefacts and even a prepared piano. Each sound was carefully selected from hours of recordings, edited but not altered to retain the original sound's qualities and dynamics and was extensively tested using the module to make sure all the sounds sound good at any setting. DOTS are very easy to fit into a mix, run through effects and are very well suited to be used and abused by a modular system.
Read more
 1 in stock $28.03
Artikel 1 bis 42 von 42 auf Seite 1 von 1 anzeigen

Filter

Tiptop Audio
Release Date
Featured
Close