Studio Monitor Stands, Mounts & Isolation Pads

Notes: The ISO-PUCK mini is the new little brother of the popular ISO-PUCK, offering the same benefits but designed for lighter speakers and monitors. The IsoAcoustics ISO-PUCK mini provide an innovative new approach in isolating studio monitors, speakers and other systems. This unique design provides a high degree of isolation while resisting lateral movement and oscillations, which results in greater sound clarity and focus. This versatile isolation tool is possibly the most cost effective upgrade available for improving the performance and clarity of your speakers or monitors.

Notes: IsoAcoustics introduce the next evolution of their specialized line of speaker stands for the audio professional, music hobbyist, audiophile, and music lover. The new ISO Series of speaker stands provide superior acoustic isolation and enhance the sound clarity of any speakers including studio monitors, home theatre systems and sound reinforcement.

With a lower profile and new contemporary design, the ISO Series of stands positions your studio closer to the supporting surface or meter bridge, and the new redesigned isolators moves the acoustic performance another step forward.

IsoAcoustics ISO Series speaker stands are built with a unique, patented isolation technology that provides a high degree of isolations and manages the speaker's energy to deliver authentic, uncoloured sound. This next generation of speaker stands effectively eliminates energy transfer into the supporting surfaces. Bass becomes tighter, overall imaging is enhanced and your speakers are enabled to perform to their full potential. Following the same design philosophy as the ISO-L8R Series, these isolation stands provide 14 variations of height and tilt adjustment to optimize the placement and performance of studio monitors by getting the tweeters in the correct alignment with the listening position.

Whether you're a pro mixing in the studio - a musician creating in a home project environment - or an audiophile who appreciates every nuance of music and sound - you'll hear and appreciate the difference with the ISO Series speaker stands. It's simply the best investment you can make for superior audio.

ISO-155:

Designed for medium size speakers and studio monitors. These stands provide 14 variations of height and tilt to optimize speaker placement and performance. Isolate your studio monitors from the supporting surface and allow them to breathe so they can deliver the clearest and most accurate sound possible.

6.1"x7.5"/15.5x19cm Short: 2.9"/9.5cm Tall: 8.75"/22.5cm 40 lbs/18kg

Notes: The IsoAcoustics ISO-L8R155 sound isolating speaker stands are fully adjustable speaker stands designed to reduce sympathetic vibrations thus increasing monitoring accuracy.

The ISO-L8R155 speaker stands provide superior acoustic isolation and enhance the sound clarity of any speakers including studio monitors, home theatre systems and sound reinforcement.

An important aspect of the speaker stand design is the ability to adjust the height and tilt angle of the supported speaker enclosure to optimize its position relative to the listener.

2 lengths of tubing along with 2 sets of end-plug pairs provide 14 steps of height adjustment as the combinations are used to tilt the speaker up and down. The stand can be assembled and reconfigured repeatedly to establish the ideal position off the supporting surface and focused towards the listener.

The tube lengths and end-caps combinations provide a simple means to establish optimal adjustment of large and small monitors over the typical 36" to 48" listening distance for mixing and evaluation.

The ISO-L8R155s speaker stands prevent the transfer of speaker cabinet energy to surrounding surfaces, effectively isolating the speaker from the desktop, bookshelf or other surface. By allowing the speaker to perform in free space, it's able to sound the way it was intended. The end result is a more accurate, satisfying sound, which makes mixing and listening a better experience.

The stands can be configured to 3" or 8" in height with the inserts that provide a variety of tilt-up and tilt-down adjustments.

Notes: If you're just starting out and have smaller studio monitors that you'd like to set on stands, the JS-MS70 is the perfect solution for you! The stable low profile base can easily be positioned into tight spaces and includes both leveling floor spikes for carpeted areas and rubber feet for hard wood and tile surfaces. The JS-MS70 has four heights from 32.5" to 44.25" and can be securely locked into place with the included locking pin.

Notes: IsoAcoustics introduce the next evolution of their specialized line of speaker stands for the audio professional, music hobbyist, audiophile, and music lover. The new ISO Series of speaker stands provide superior acoustic isolation and enhance the sound clarity of any speakers including studio monitors, home theatre systems and sound reinforcement.

With a lower profile and new contemporary design, the ISO Series of stands positions your studio closer to the supporting surface or meter bridge, and the new redesigned isolators moves the acoustic performance another step forward.

IsoAcoustics ISO Series speaker stands are built with a unique, patented isolation technology that provides a high degree of isolations and manages the speaker's energy to deliver authentic, uncoloured sound. This next generation of speaker stands effectively eliminates energy transfer into the supporting surfaces. Bass becomes tighter, overall imaging is enhanced and your speakers are enabled to perform to their full potential. Following the same design philosophy as the ISO-L8R Series, these isolation stands provide 14 variations of height and tilt adjustment to optimize the placement and performance of studio monitors by getting the tweeters in the correct alignment with the listening position.

Whether you're a pro mixing in the studio - a musician creating in a home project environment - or an audiophile who appreciates every nuance of music and sound - you'll hear and appreciate the difference with the ISO Series speaker stands. It's simply the best investment you can make for superior audio.

ISO-130:

Designed for smaller speakers and studio monitors. These stands provide 14 variations of height and tilt to optimize speaker placement and performance. Isolate your studio monitors from the supporting surface and allow them to breathe so they can deliver the clearest and most accurate sound possible.

5.1"x6"/13x15cm Short: 2.7"/8cm Tall: 8"/20.3cm 20 lbs/9kg

Notes: This robust monitor speaker stand is an ideal solution for studio, home or small projects. The stand has a low profile triangular base, is height adjustable with locking pin.

Notes: The Quik-Lok BS300 is an affordable, strong, height-adjustable near-field monitor/speaker stand, designed for home, project and recording studios.

The BS-300 is designed for home, project and recording studios with a stable, 3-point triangle base with adjustable leveling floor spikes. The Quik-Lok BS300 can support up to 100lb/45.2kg on its large, sturdy 9"/23cm square metal top plate.

Notes: Acoustic isolation pads decouple monitor speakers and eliminate vibrations/resonance, and in some instances eliminates resonant coupling from the surface to which the speakers are situated. Using the angled isolation pads gives greater detail and depth across the frequency spectrum, allowing for easier and cleaner mixing.

The high density foam allows the speaker to be separated from the surface while the non-slip surface ensures the speaker stays in place. The kit contains 2 components for different configurations (horizontal/angled).

Product Dimensions (mm): 190x240

Notes: Acoustic isolation pads decouple monitor speakers and eliminate vibrations/resonance, and in some instances eliminates resonant coupling from the surface to which the speakers are situated.

Using the angled isolation pads gives greater detail and depth across the frequency spectrum, allowing for easier and cleaner mixing. The high density foam allows the speaker to be separated from the surface while the non-slip surface ensures the speaker stays in place. The kit contains 2 components for different configurations (horizontal/angled).

Product Dimensions (mm): 263mm x 380mm

Notes: IsoAcoustics introduce the next evolution of their specialized line of speaker stands for the audio professional, music hobbyist, audiophile, and music lover. The new ISO Series of speaker stands provide superior acoustic isolation and enhance the sound clarity of any speakers including studio monitors, home theatre systems and sound reinforcement.

With a lower profile and new contemporary design, the ISO Series of stands positions your studio closer to the supporting surface or meter bridge, and the new redesigned isolators moves the acoustic performance another step forward.

IsoAcoustics ISO Series speaker stands are built with a unique, patented isolation technology that provides a high degree of isolations and manages the speaker's energy to deliver authentic, uncoloured sound. This next generation of speaker stands effectively eliminates energy transfer into the supporting surfaces. Bass becomes tighter, overall imaging is enhanced and your speakers are enabled to perform to their full potential. Following the same design philosophy as the ISO-L8R Series, these isolation stands provide 14 variations of height and tilt adjustment to optimize the placement and performance of studio monitors by getting the tweeters in the correct alignment with the listening position.

Whether you're a pro mixing in the studio - a musician creating in a home project environment - or an audiophile who appreciates every nuance of music and sound - you'll hear and appreciate the difference with the ISO Series speaker stands. It's simply the best investment you can make for superior audio.

ISO-200:

Designed for larger speakers and studio monitors. These stands provide 14 variations of height and tilt to optimize speaker placement and performance. Isolate your studio monitors from the supporting surface and allow them to breathe so they can deliver the clearest and most accurate sound possible.

7.8"x10"/20×25.4cm Short: 3.5"/12.5cm Tall: 8.75"/22.5cm 60 lbs/27.2kg

Notes: Over 90 of a speaker's radiated power is of frequencies below 200Hz. Enormous amounts of energy are dissipated. That energy is partially dissipated into the cabinet structure which in turn vibrates the supporting structure, ie floorboards and joists. Witness the bass thump from sounds from other rooms. A foam mat will absorb most of this low frequency energy. The manufacturer evaluated various formulations of foam rubber and found this to provide the greatest attenuation and also provide a greater definition to the sound within the studio.

Dimensions: 400mm x 300mm x 75mm.

Notes: We're familiar with IsoAcoustics' highly effective line of monitor isolation stands that seem to bring out the best from any speaker. NAMM 2017 will see IsoAcoustics release the new Iso-Puck - the same concept as the bigger stands, yet in a low-profile, flexible, scalable version. The little puck-like discs are placed under your speaker to isolate them from the surface they're sitting on.

An Iso-Puck is pretty small - just 3cm tall and 6cm in diameter. Its round shape makes positioning a bit easier than with stands, especially on varied surfaces like the narrow space on top of a console meter bridge. The multipart isolation construction of the Iso-Puck lets it move to isolate and manage the energy in line with the same isolation concepts employed in other IsoAcoustics products. The Pucks feature a flange suction cup on the top to hold tight the speaker surface, as well as a bottom suction cup flange for the supporting surface. Energy is transferred to the core of the multipart isolator in between which resists lateral movement and offers better isolation.

Notes: The Samson MS200 is a pair of professional-grade isolated studio monitor stands. Telescopic height 50 inches. It includes carpet spikes.

Notes: The Auralex SubDude II is a lower profile version of our classic SubDude and is perfect for small subwoofers in home theaters and hi-fi systems. This patented isolation platform features a stylish velour covering over an inert structural layer that floats on a cushion of acclaimed Auralex Platfoam. This carefully engineered solution allows the true sound of your sub to come through by negating resonance artifacts.

Based on the same Auralex technology that famous recording artists use on-stage and in the studio, this carefully chosen combination of specialized materials instantly diminishes structural vibrations, resulting in cleaner and tighter bass, reduced coloration and a more accurate low-frequency response.

The SubDude-II is an incredibly effective isolation platform that instantly improves your subwoofer's performance.

Notes: Two steel monitor stands, extendible from 75-130 cm. Max. load each: 30 kg.

- Adjustable monitor stands with cotter lock
- Particularly suited for 5.1 systems or close-range monitors
- Sturdy cast iron foot
- Comes as a pair
- Powder-coated steel version
- Colour: Black

Notes: Acoustic isolation pads decouple monitor speakers and eliminate vibrations/resonance, and in some instances eliminates resonant coupling from the surface to which the speakers are situated. Using the angled isolation pads gives greater detail and depth across the frequency spectrum, allowing for easier and cleaner mixing.

The high density foam allows the speaker to be separated from the surface while the non-slip surface ensures the speaker stays in place. The kit contains 2 components for different configurations (horizontal/angled).

Product Dimensions (mm): 310x310

Notes: Acoustic isolation pads decouple monitor speakers and eliminate vibrations/resonance, and in some instances eliminates resonant coupling from the surface to which the speakers are situated.

Using the angled isolation pads gives greater detail and depth across the frequency spectrum, allowing for easier and cleaner mixing. The high density foam allows the speaker to be separated from the surface while the non-slip surface ensures the speaker stays in place.

Notes: A pair of stylish monitor stands ideal for studio, home or small projects. Supplied with floor spikes to increase stability providing a sturdy stand for monitor speakers.

In the box:

- 2 x Studio Monitor Stands
- 8 x Floor Spikes
- 16 x Sticky pads
- 1 x Clamping Lever
- Pack of M6x25 fixing screws

Notes: 2 professional-grade isolated studio monitor stands, including carpet spikes. Telescopic height from 30 to 50 inches.

Notes: The monitor pads keep the sound coming from the speakers, not the surface they are standing on. Everything that can vibrate will colour the sound and that includes the surface that the monitors are mounted on.

The monitor pads decouple the energy from the supporting surface which in turn helps to give a more accurate monitoring environment. They are suitable for speakers up to 20kg. Their dimensions of the supporting area are 280mm long x 100mm wide x 25mm thick. They are sold as a pack of 4 pads, which is enough to isolate one pair of monitors.

Notes: A pair of robust wall brackets for mounting speakers with a 35mm pole-mount. Features vertical adjustment and an extendable arm.

Notes: An aluminium top hat for fitting into a speaker cabinet, thus allowing the speaker to be mounted on a 35mmO stand.

Notes: A pair of robust steel stands with lockable height adjustment. Can support large speakers with 35mm top hats. Supplied with a heavy duty carry bag.

Notes: The Auralex SubDude-HT is a larger, lower-profile version of our classic SubDude. The SubDude-HT is designed to work with most large-format home theater and hi-fi system subwoofers.

This patented isolation platform features a stylish velour covering over an inert structural layer that floats on a cushion of acclaimed Auralex Platfoam. This carefully engineered solution allows the true sound of your sub to come through. Its isolation system negates, and does not produce, resonant artifacts.

This carefully chosen combination of specialized materials instantly diminishes structural vibrations, resulting in cleaner and tighter bass, reduced coloration and a more accurate low-frequency response. The SubDude-HT supports most subs up to 300 lbs. and is an incredibly effective isolation platform that instantly improves subwoofer performance.

Notes: Your loudspeakers are the most critical components you use to verify the quality of your work. No matter how good your mixer, mics, preamps, cables, and other pieces of gear that you've invested in, you're not truly hearing what your recordings sound like until you isolate your monitors from their environment.

This is where the Auralex MoPADs come in. MoPAD Monitor Isolation Pads provide sonic isolation between your monitors and whatever your monitors are resting on, INSTANTLY improving the accuracy of your entire monitoring system.

MoPADs are affordable, easy to implement and really effective at decoupling your monitors from your room and all its contents. You've gotta get some! Until you do, you'll never know what your recordings really sound like.

***MONITORS NOT INCLUDED***

Notes: Regardless of how good your monitors are, they aren't fulfilling their potential unless they are properly isolated. We've developed Project MonPads to solve this exact problem with zero hassle and for minimum expense. Formed from our unique anti-vibration foam, MonPads decouple your speaker cabinets from whatever surface you place them on.

By reducing resonance, MonPads give you a much clearer picture of what is happening in your mix. You notice the low frequencies are more even, the stereo image better defined and a sudden increase in detail across the frequency spectrum.

Each pack contains 4 MonPads and 4 angle wedges so you can point your tweeters directly towards your ears. Check out the images for suggested configurations.

Sit your monitors on a set of Project MonPads and you'll agree they offer the fastest and most valuable upgrade you can make to your studio.

*Monitors not included*

Notes: The TeleLock Series speaker stands from Ultimate Support are extraordinarily strong yet lightweight due to its over-sized heavy wall aluminum tubing. They're everything you'd expect from an Ultimate Support speaker stand - they're strong, sturdy, lightweight, 100% field serviceable, and easy to set up and take down. However, the TeleLock collar gives the user the ability to safely raise or lower the stand WHILE a speaker is on it thanks to the Auto-lock technology that securely grips the telescoping tube in place as you set its height.

The TS-90 is one of the easiest speaker stands to use thanks to its patented TeleLock collar. Set the TeleLock collar to either the "Raise" or "Lower" setting and the Auto-lock technology provides just the right amount of resistance to allow you to raise or lower the speaker while locking the tube in place as you go. It's like having tour support built into your speaker stand!

The TS-90's offset tripod base design provides more support than typical "off-the-shelf" speaker stands. The design makes for very tight internal fittings, doing away with unnecessary sloppy leg problems, and includes a super strong die-cast metal collar that prevents over-tightening and breakage issues associated with all plastic designs.

The entire stand (legs, mast, and telescoping tube) uses oversized, heavy-walled aluminum tubing for durability, functionality, and weight savings. The TS-90 will not rust or corrode (thanks to its architectural anodized finish), is very smooth to operate, and is extraordinarily strong yet lightweight.

From the foot caps on the bottom of the tripod legs all the way up to the speaker adapter at the top of the stand, the TS-90 is serviceable by parts as needed over its very long lifespan. In the unlikely event that something does break on the TS-90, simply replace with an affordable part instead of throwing the entire stand away and buying a whole new one!

Notes: A pair of studio monitor desktop stands with adjustable angle top plates. Features High-quality studio monitor stands for desktop placement Adjustable height up to 380mm /15 inches Variable tilt angle on the top plate for precision placement in studio Fitted with non-slip, anti-resonance, rubber isolating feet.

Kit includes the following:

2x SMS50R monitor speaker stands
2x sets of anti-slip foam
1x instruction manual

Specifications:
Maximum load: 30Kg / 66lb
The steel top plate measures 23cm x 22.5cm
Material: O 35mm / 1.37 inches and O 41mm / 1.6 inches steel pole and base
Surface and colour: black powder coated
Dimensions 240mm - 380 mm
Weight 2.15 kg

Notes: The MS Series studio reference monitor stands from Ultimate Support offer unparalleled innovation and strength for professional, project, and home studios alike. The MS-80 is a desktop monitor stand that features non-slip, high-density acoustic foam and an angle-adjustable base that enables the end user to fine tune the sweet spot. The MS-90 is a column monitor stand that offers internal cable management channels and 6000 Series aluminum construction while the MS-100 is essentially a combination of the two!

The MS-100 and MS-80 both feature patent-pending technology and design that gives control over the angle and axis of your studio monitors. Fine tune the position of your monitors for the perfect mix or listening position with the turn of the front-panel dial. What's more, you can angle your monitors up OR down based on your needs!

From top to bottom, all three MS Series stands feature sonic isolation and decoupling components. The MS-100 delivers acoustic foam/stabilizing pads on top, two rubber couplers between the column and the top and bottom bases, and spike decoupling designs under the top and bottom base plates. Add the MS-100 to your studio and discover what you've been missing in your mix!

The MS-100 and MS-90 offer three internal channels that run the length of the column. So your studio remains clear of untidy cables, two channels are designed for audio and power respectively. For additional stability, the larger third channel can be filled with shot or sand.

The MS Series studio monitor stands are made from the highest quality materials backed by award-winning design that marries both form and fashion. The modern studio owner will love the contemporary look while the veteran engineer will appreciate the solid build and versatility.

Notes: With this stand it is easy to position the speaker vertically on a table with better aiming to the listening position. The stand improves the acoustical performance by raising the monitors above the table level, causing less reflections from the table surface. The sturdy stand has a 0-20-degree upward tilt angle adjustment upwards. Available in black and white powder coat finish.

Width
110 mm
Height
199 mm

Notes: Black steel pole for mounting speaker cabinets on bass boxes that have top hats fitted.

Notes: A robust steel stand with lockable height adjustment that can support large speakers.

Notes: Elevated Desktop Speaker Stands

These desktop speaker stands from QTX are compactly designed for use in the studio, home and office. These stands provide a platform for your speakers allowing perfect positioning and optimize listening height. Foam surface pads are provided to minimize unwanted vibrations. These stands are designed for use with small nearfield monitor speakers and bookshelf speakers.

Plate dimensions: 160 x 130mm
Base dimensions: 190 x 130mm
Height: 130mm
Max. load: 5" speaker
Dimensions: 190 x 130 x 130mm
Weight: 2.3kg

In the box

The box for this item contains :
Elevated Desktop Speaker Stand Pair

Notes: The floor stand comes with a cast iron base with an anti-vibration rubber ring. The height of the stand is adjustable from 870 to 1565 mm. It weighs 5.4 kg and its base diameter is 250 mm. Available in black color. Packed in a single cardboard box.

Stand plates which are designed to fit the Iso-Pod stand are recommended to use with this product. Please note, that we don't recommend using this product with the 8331 monitor.

Length min.
870 mm
Length max.
1565 mm
Width
250 mm

Notes: Black steel pole for mounting speaker cabinets on bass boxes that have top hats fitted.

Notes: The Bag-90 by Ultimate Support is the perfect addition to your gigging rig! Each Bag-90 holds one of our regular sized speaker stands, including the TS-100B, TS-90B, TS-80B/TS-80S, and TS-70B. It is a heavy-duty tote bag with a reliable zipper and enhanced pulls. The Ultimate Support Bag-90 also features two strong, durable hand grips that velcro together to give you added carrying strength and comfort.

Notes: Over 90% of a speaker's radiated power is of frequencies below 200Hz. Enormous amounts of energy are dissipated. That energy is partially dissipated into the cabinet structure which in turn vibrates the supporting structure, ie floorboards and joists. Witness the bass thump from sounds from other rooms. A foam mat will absorb most of this low frequency energy. Our manufacturer evaluated various formulations of foam rubber and found this to provide the greatest attenuation. Also provides a greater definition to the sound within the studio. Dimensions (mm) 400 x 300 x 75.

Notes: This economy speaker stand kit is perfect for mobile DJ's, bands and schools and more. This speaker stand kit comprises of a pair of black speaker stands which are strong and reliable.

Also included is a large carry case for easy transporting & storage.

Each speaker stand is height adjustable from 1100 - 1600mm so ideal for most venues.

The speaker poles are a standard 35mm diameter and have a max. load of 45kgs.

The carry-bag is made from a lightweight material and helps to protect the stands in transit as well as making them easy to carry, zip fastened with a carrying handle.

Notes: High quality foam isolation pads for the Genelec M-Series monitor.

These isolation pads allow for 3 different positioning angles of your monitors, and include a metal plate to attach to the base of the monitor for securing.

Notes: Studio Monitor Stands - 2pcs

A pair of stylish monitor stands ideal for studio, home or small projects. Supplied with floor spikes to increase stability providing a sturdy stand for monitor speakers.

The box for this item contains :

2 x Studio Monitor Stands
8 x Floor Spikes
1 x Hex Key
Pack of M6x25 fixing screws

Notes: High quality foam isolation pads for the Genelec M-Series monitor.

These isolation pads allow for 3 different positioning angles of your monitors, and include a metal plate to attach to the base of the monitor for securing.

Notes: 8000 series Genelec stand plates are designed for use together with the Iso-Pod that comes with all 8000 series monitors. The Iso-Pod allows you to tilt the monitor for optimal alignment. Simply mount the stand plate onto the 3/8" thread on the tube and ensure tight screw connection. Place the Iso-Pod over the four pins of the stand plate. Available in black.

Width: 114 mm

Notes: Adjustable Studio Monitor Floor Stand

The adjustable monitor floor stand by QTX is perfectly designed for studio and home use, providing a sturdy platform for your speakers. Adjust the height of the stand using the hand fastener and safety pin to one of the 5 height positions, up to 540mm high. Foam surface pads are provided to minimize unwanted vibrations and ensure your monitor stays firmly in place. This stand is recommended for use with small and midfield studio monitors. Maximum weight capacity.

Plate dimensions: 240 x 230mm
Base: dimensions: 250 x 225mm
Height: 300mm (minimum)
Height adjustments: 340mm, 390mm, 440mm, 490mm, 540mm
Max. weight load: 15kg
Weight: 2.53kg

In the box

The box for this item contains:
1pcs adjustable studio monitor floor stand

Notes: The new MS Series studio reference monitor stands from Ultimate Support offer unparalleled innovation and strength for professional, project, and home studios alike. The MS-80 is a desktop monitor stand that features non-slip, high-density acoustic foam and an angle-adjustable base that allows the end user to fine tune the sweet spot. The MS-90 is a column monitor stand that offers internal cable management channels and 6000 Series aluminum construction while the MS-100 is essentially a combination of the two!

From top to bottom, all three MS Series stands feature sonic isolation and decoupling components. The MS-90 delivers four non-marring sound decoupling pads that stabilize monitors of varying sizes. The MS-100 and MS-90 feature two rubber couplers between the column and the top/bottom plates and spike decoupling designs under the top and bottom base plates. Add the MS-90 to your studio and discover what you've been missing in your mix!

The MS-100 and MS-90 offer three internal channels that run the length of the column. So your studio remains clear of untidy cables, two channels are designed for audio and power respectively. For additional stability, the larger third channel can be filled with shot or sand.

The MS Series studio monitor stands are made from the highest quality materials, such as Series 6000 aluminum, and backed by award-winning design that marries both form and fashion. The modern studio owner will love the contemporary look while the veteran engineer will appreciate the solid build and versatility.

Depending on the needs of your studio, the MS-90 is available in two studio standard heights: 45" and 36". Both are identical in construction and features except for height. Choose the height that's best for your studio design!

Notes: Universal speaker stand for loudspeakers till 35 kg, black powder coated.

Triangular foot, 35 mm square section tube, Tube 40/35 mm, T-screw for locking.

For heavy speakers you can lock the height on 102 - 114 - 126 - 138 - 150 with the included safety pin.

Utility space for speakers: 230 x 230 mm, steel material thickness 2 mm, slip resistant surface. Plastic cable clip on upper tube for adequate and discreet cable guiding.

The foot can be equipped with 3 adjustable plastic feet or steel-spikes. Without the plate you can use the speaker stand with a standard speaker stand receptacle (35mm).

The product is delivered dismantled, with screws and hexagon socket screw key, 3 plastic feet and 3 steel spikes with lock nut.

Notes: Two height adjustable monitor stands

A pair of high quality studio monitor stands with unique auto-lock ratchet system and tripod base

High quality studio monitor stands

Adjustable height up to 1.1 metre / 43.3 inches

Auto-lock ratchet system

3 x foot tripod base for easy studio placement

Height: 680mm x 1100mm / 26.7 x 43.3 inches
Maximum load: 40Kg / 88lb
Material: O 35mm / 1.37 inches aluminum pole and steel outer pole
Surface and colour: black powder coated
Weight: 3.2Kg / 7lb
The top plate is 224mm x 232mm

The Novopro SMS80R studio monitor speaker stands have been designed for ease of use as well as safety. The stand has an integral auto-lock ratchet system which allows you to adjust the height and lock in that adjustment without the usual slipping, dropping and inconvenience you get with standard monitor stands.

Kit includes the following:

2 x SMS80R monitor speaker stands
1 x allen (hex) key
2 x cable management clips
1 x instruction manual

Notes: The GRAMMA v2 (Gig and Recording, Amp and Monitor, Modulation Attenuator) is an incredibly effective patented device that's used to float an amp or loudspeaker. This highly effective isolation platform features an Ozite covering over an inert structural layer that floats on a 1" pad of acclaimed Auralex Platfoam. This carefully engineered studio and live performance solution allows the true sound of your amp or loudspeaker to come through by negating resonance artifacts that can muddy up the tone of your amp.

GRAMMA yields nearly total acoustic isolation, resulting in a purity of tone that has to be heard to be believed!

Notes: A strong speaker bracket for wall mounting speaker boxes. The bracket provides vertical adjustment.

Notes: Short table stand providing a raised position for loudspeakers. Heavy black cast iron base with anti-vibration rubber ring, diameter 17 mm. Mounting 3/8" thread on the tube top. Preferably used together with stand plates for better positioning. Suitable for 8010, 8020, 8030 and corresponding G and 4000 Series models (G One, G Two, G Three, 4010, 4020 and 4030). These models have an integrated 3/8" thread for possible direct fixing without stand plate. 8040, G Four and 4040 require also a 8040-408 Stand plate, because they have an unsuitable M10 thread. As the 4040 is shipped without an Iso-Pod, also an Iso-Pod kit 8040-440 is needed.

Not to be used with 8331.

Width: 180 mm
Height: 170 mm

Notes: Air-Powered Series speaker stands from Ultimate Support represent everything all other speaker stands aspire to be. They're incredibly strong, extraordinarily sturdy, lightweight, 100% field serviceable, AND raise and lower speaker stands on their own! Driven by innovation and years of research and development, the Air-Powered Series feature an internal shock that lifts speakers weighing 35 lbs and less with no effort, and requires just one hand's worth of effort to raise speakers weighing more than 35 lbs! There are three models to choose from: the TS-100B, TS-110B which offers additional height, and the TS-110BL which also offers additional height plus a leveling leg that allows the speaker stand to stay level on risers, stairs, and other uneven surfaces.

The TS-100 is the easiest speaker stand to use thanks to the internal air-powered shock that literally raises the speaker for you. The stand's internal shock easily raises speakers weighing 35 lbs and less with no effort from the user. And, the TS-100 requires very little effort from the end user to raise speakers weighing more than 35 lbs. When you're ready to lower the speaker, we've provided a convenient and ergonomic hand grip from which you can lower the speaker - with just one hand. There's never been an easier, more convenient, or safer way to set up and tear down speakers.

The TS-100's offset tripod base design provides more support than typical "off-the-shelf" speaker stands. The design makes for very tight internal fittings, doing away with unnecessary sloppy leg problems, and includes a super strong die-cast metal collar that prevents over-tightening and breakage issues associated with all plastic designs.

The entire stand (legs, mast, and telescoping tube) uses oversized, heavy-walled aluminum tubing for durability, functionality, and weight savings. The TS-100 will not rust or corrode (thanks to its architectural anodized finish), is very smooth to operate, and is extraordinarily strong yet lightweight.

From the foot caps on the bottom of the tripod legs all the way up to the speaker adapter at the top of the stand, the TS-100 is serviceable by parts as needed over its very long lifespan. In the unlikely event that something does break on the TS-100, simply replace with an affordable part instead of throwing the entire stand away and buying a whole new one!