Back catalogue: All genres

Notes: With the Orbit dBucket Flanger, Strymon have painstakingly recreated every aspect of some of the greatest vintage analog flangers. To go beyond that, they have also added features such as through zero flanging to take you where few have ever ventured before. Their high performance DSP is dedicated entirely to doing one thing and one thing only, delivering the ultimate flanger. Add true bypass, extensive expression pedal control, a favorite preset, super high quality analog front end and output sections, low power consumption and you'll never want to let go of your Orbit.

Features

Hand crafted dBucket algorithm for highly accurate reproduction of every stage of an analog bucket brigade chip. Built on the dBucket building blocks developed for our Brigadier delay.

Super low noise, high performance A/D and D/A converters w/ 110dB signal to noise

High performance DSP stuffed into a compact form factor

3 LFO types (log, lin, through zero)

3 Feedback types (positive, negative, pos/neg)

TRUE BYPASS (electromechanical relay switching)

Stereo output

Expression pedal input with selectable control over any knob parameter

Favorite footswitch for saving your favorite setting

Powered with a standard 9V center negative DC supply. Compatible with all major DC supply brands. Current consumption 200mA - (250mA recommended supply)

Premium analog front end and output section

No-nonsense user interface

Strong and lightweight purple anodized aluminum chassis

Crafted with love in the USA

Notes: Discover your amp's potential

Riverside's cascading gain stages create harmonically rich tones that are immensely musical and natural-from silky clean overdrive to colossal distortion, and all points between. The analogue JFET front-end ensures that Riverside responds to your guitar with uncompromised dynamics and feel. The precision crafted DSP generates dynamic complexity and pleasing harmonics at every stage, letting your amp shine at any gain level. Riverside takes your amp to places you never knew it could go.

Overview

Infinite sweet spot

Riverside's continuously variable circuit tuning dynamically tweaks multiple parameters under the hood so that the sweet spot follows you at any gain setting. As you turn the Drive knob, Riverside makes continuous adjustments, tuning the circuit for optimum tone. This results in an incredibly versatile drive pedal that is equally capable of providing sparking cleans, mild overdrives, high-gain leads, and heavy saturated distortions.

Flexibility to adapt to any amp

Your amp choice has a large influence on the sound of any drive pedal connected to it. Riverside's musical 3-band EQ, with independent Bass, Middle and Treble knobs, is designed to complement your amp's tone with the flexibility needed to dial in your sound effectively and efficiently. The three-position Presence switch tailors the highest frequencies, allowing Riverside to integrate perfectly with any amp or setup, no matter how dark or bright.

Digital or analogue? Strymon choose both

The first stage of Riverside's custom multistage drive topology is an all-analogue, ultra low noise, discrete, class-A JFET circuit. This gain stage is digitally controlled to maximize headroom while adding as much as 20dB of pure analogue gain, with tight integration to the subsequent DSP gain stages. With Strymon's hybrid approach you get the best of both analogue and digital worlds: The JFET stage provides exceptional touch sensitivity and dynamic interaction with your guitar, while the incredibly powerful SHARC DSP facilitates the great level of detailed complexity and responsiveness you'll want to hear.

Tone Adjustment and Shaping

Drive adjusts the amount of gain applied to the signal. Employs continuously variable circuit tuning which adjusts many parameters as you turn the knob.

Level controls the output volume level when the effect is engaged.

Gain toggles between low or high gain channels.

Low sets a gain structure allowing for a wide range of low to medium gain sounds. At high Drive settings the sound is heavily overdriven, and slightly 'loose' like a dimed vintage amp.

High increases the gain throughout the signal path and tightens things up. Stays relatively clean at low Drive settings, shifting to heavy saturated distortion at maximum.

Push toggles between flat or enhanced midrange frequencies.

Norm can be used for cleaner, more transparent tones.

Mid adds a mid-band EQ push just after the analogue front-end gain. This pushes the subsequent drive stages harder, tightening up the response. Perfect for fat drive tones, or pushing a distorted or on- the-edge amp into further breakup.

Bass is an active shelving/parametric low frequency control. The control is post-drive, shaping your drive tones before they reach your amp.
Middle is a parametric mid boost/cut control with optimized frequency centre. The control is post-drive, shaping your drive tones before they reach your amp.

Treble is a wide-ranging high frequency active shelf control. The control is post-drive, shaping your drive tones before they reach your amp.

Rear Panel

Presence is a three position switch that tailors the highest frequencies of the output signal.

Minus (-) provides clarity with a controlled top end that works well with many amps that have a brighter voice.

Enhanced (centre) extends the top end to allow for more sizzle on high gain tones. Useful if you want enhanced detail in the uppermost frequencies.

Plus (+) delivers extended high end detail to the darkest amps, and is also useful when plugging directly into a power amp.

In is a high impedance mono input. Plug your instrument in here.

Out is a mono signal output. Connect to your amp, other pedals, mixing board, etc.

Boost allows use of an external switch to toggle up to +6dB of post boost on/off. Or connect to the EXP input of another Strymon pedal and simultaneously engage the Favorite settings on both pedals with Riverside's Favorite switch.

Expression Pedal Input provides continuous expression pedal control over any or all of the knobs, in any direction, with your foot. Or can be used in Volume Mode to control the volume level of the effect.
Power - Plug your power supply in here. Maximum 9 volts DC centre-negative, with a minimum of 250mA of current. Standard 5.5mm x 2.1mm barrel connection.

Secondary Functions

Press and hold ON footswitch to enter Secondary Function mode. Release the footswitch, then turn the desired knob to adjust the parameter.

Optional variable-threshold Noise Reduction tames hum, buzz, and system noise when you're not playing. A downward expander with advanced signal detection techniques creates a seamless transition to noise reduced silence with all types of input signal dynamics.

Boost Level sets up to +6dB of available boost when using an external Boost footswitch.

Ins, Outs, Switches

High impedance mono input
Mono output
Favorite footswitch to save a favorite setting
Favorite Input to connect an external MiniSwitch to recall a Favorite preset
Expression pedal input allows the connection an expression pedal for simultaneous morphing control over multiple parameters (Expression mode), or logarithmic taper for smooth volume control (Volume mode)
MIDI accessible via Expression jack for remote parameter control and access to 300 preset locations
Boost pedal input allows connection of an external footswitch for up to +6dB of analog boost, or to toggle the Favorite preset on other Strymon pedals (Favorite Out mode)

Analogue Quality

Ultra low noise, high performance 24-bit 96kHz A/D and D/A converters provide uncompromising audio quality
Premium analog front end and output section
Super high performance SHARC DSP in a compact form factor
32-bit floating point processing

More

True Bypass (electromechanical relay switching) or selectable transparent Analog Buffered Bypass
Strong and lightweight anodized gold aluminum chassis
9V DC power supply included
Power requirements: maximum 9 volts DC center-negative, with a minimum of 250mA of current
4.5" deep (11.43 cm) x 4" wide (10.16 cm) x 2.4" tall (6.1 cm)
Designed and built in the USA

Notes: Sunset

Classic overdrive sound, x2.

Sunset gives you the best of the best classic overdrive circuits, custom voiced for instantly gratifying control over a huge range of sought-after tones. Strymon studied six circuit types found in many truly timeless and iconic overdrive pedals, and put their takes on all six of them into a single two-channel unit.

Overview

Two pedals at once.

Sunset is really two customisable overdrive pedals, independently selectable and flexibly routable, designed and voiced for complementary tones when stacked. Six distinct circuits each feel and react differently in your hands, two at once, all in one convenient package. Push your amp any way you want, from transparent "more amp" to heavy saturated fuzz, and all the best places in between.

Holy Grail tone, minus the quest.

We are all familiar with the endless search for the ultimate overdrive pedal and the perfect tone. Strymon did the critical listening and custom voicing to design each side of Sunset with just one tone knob, so you can quickly dial in the sound you want. The knob ranges for each circuit type are custom calibrated to provide maximal usable control. Strymon applied the same design philosophy and care to the stacking options, ensuring each combination interacts optimally and sounds great, so a huge range of classic overdrive tones are instantly achievable.

Optimized stacking.

Since the time when overdrives were created to simply push an amp in order to achieve an overdriven sound even at sane volume levels, players have evolved to want more layered, multistage tonalities. Stacking gives you more flexibility and tone range on the floor. You can find an overdrive that sounds good on its own, then run it through a second drive to add new dimensions to your tone. Sunset allows you to use any of its six overdrive circuits on their own, or route the Channel A drive circuit through Channel B, or Channel B through Channel A, or use two circuits in parallel. When stacking overdrive pedals, some combinations work especially well together. Sunset eliminates the guesswork. Routing options have been chosen deliberately to present the best-sounding combinations of drive circuits.

Digital or analogue? Strymon chose both.

Sunset's input features an ultra low noise, discrete, class-A JFET circuit providing up to 20dB of pure analogue gain. With Strymon's hybrid approach you get the best of both analogue and digital worlds: The JFET stage provides exceptional touch sensitivity and dynamic interaction with your guitar, while the incredibly powerful SHARC DSP facilitates the great level of detailed complexity and responsiveness you'll want to hear.

Channel A overdrive circuits

The Ge overdrive combines the softer response of germanium diodes with a parallel path that blends in the dry signal as the Drive is lowered. At higher gains the lower-midrange frequencies are emphasized to create a tight, thick response. This overdrive really fattens up single coil pickups, and responds with a bold push when paired with humbuckers.

The Texas overdrive employs a single stage soft-clipper configuration that is filtered before and after the gain stage to create a smooth and dynamic overdrive. The original signal dynamics are retained as the gain is increased - perfect for playing the blues or just fattening up your sound with a signature midrange bump.

Channel B overdrive circuits

The 2 stage overdrive combines a soft-clipping stage followed by a hard-clipping stage, creating a complex overdrive with a wide range of gain. Its EQ structure preserves the low end while adding some muscle to push your amp. This overdrive can easily take you from lightly clipped to beefy saturation.

The Hard overdrive uses a single-stage hard- clipping circuit that has a ton of available gain, approaching fuzz territory with the Drive knob maxed. At lower gains, mildly clipped transparent tones are achieved with this versatile drive. The wide-ranging Tone knob lets you shape the top end from smooth to buzzy.

Channel A boost circuit

The Treble type is a treble booster that removes the low frequencies as the Tone knob is turned up - great for tightening up an overdriven amp, or driving another gain pedal that's a bit looser on the low end. Turning the Tone knob down brings in the low end, making for a versatile all- around boost.

Channel B boost circuit

The JFET type is a clean boost that subtly

beefs up your signal with the dynamics and responsiveness created from the JFET front end. As you turn up the drive, the signal gets rounded and warmer. The is a great option when your amp just "needs a little extra."

Ins, Outs, Switches

High impedance mono input
Mono output
Favorite Input to connect an external MiniSwitch to recall a Favorite preset
Expression pedal input allows the connection an expression pedal for simultaneous morphing control over multiple parameters (Expression mode), or logarithmic taper for smooth volume control (Volume mode)
MIDI accessible via Expression jack for remote parameter control and access to 300 preset locations

Audio Quality

Ultra low noise, high performance 24-bit 96kHz A/D and D/A converters provide uncompromising audio quality
Premium analog front end and output section
Super high performance SHARC DSP in a compact form factor
32-bit floating point processing

More

True Bypass (electromechanical relay switching) or selectable transparent Analog Buffered Bypass
Strong and lightweight anodized red aluminum chassis
9V DC power supply included
Power requirements: maximum 9 volts DC center-negative, with a minimum of 250mA of current
4.5" deep (11.43 cm) x 4" wide (10.16 cm) x 2.4" tall (6.1 cm)
Designed and built in the USA

Notes: A warm grittiness to the warble, a rippling, wooshing, bubbling irregularity to the modulation and a dynamic response to your picking are all hallmarks of the true vibe experience. Thicker and chewier than any chorus, earthier than any phaser and uniquely magical in front of a driven amp, the perfect vibe pedal moves you to dig in and play without inhibition. This feeling has been difficult to find outside of large and expensive fully-analog boutique units, but the search for that elusive experience is now over.

UltraViolet's simple and responsive controls provide a wider range of sounds than traditional vibe pedals. In addition to the familiar Chorus (50% wet) and Vibrato (100% wet) settings, there is a new Blend setting (30% wet) for an inspiring variety of more subtle effects. A Bias switch gives you three distinct flavors of sweep shape and tone emphasis, allowing for tons of sonic variation. At slow speeds, the intensity range has been expanded beyond that of traditional vibe circuits to push even further into warmly undulating sonic territory.

For UltraViolet's new vibe algorithm, all the elements of the classic optical vibe circuit (and their interdependencies) have been meticulously recreated for a dynamic playing response. From the effects of bias, speed and LFO waveshape on the pulsing of the lamp, to the response of the light-dependent resistors that set the center frequencies of the staggered phasing filters, the entire system has been duplicated and carefully tuned to produce the very best sounds a vibe pedal can offer.

TRS stereo input and output in a dual mono configuration means you can place UltraViolet at any point in your pedal chain with no impact on your stereo image.

Full MIDI implementation with 300 available preset locations ensures that UltraViolet is ready for your MIDI rig. In addition to TRS MIDI, there is a USB-C jack for controlling the pedal via MIDI from a computer or for performing firmware updates. For hands-free control without MIDI you can connect an expression pedal for control over any combination of knobs in any direction (Expression pedal controls Speed by default.) Or attach an optional external switch for tap tempo or favorite recall.

Finally, a high-impedance, ultra-low noise discrete Class A JFET stereo input preamp provides exceptional touch sensitivity, dynamics and feeliall in a rugged and elegantly compact form factor.

Notes: The Voyager MKII is a mid-focused overdrive/preamp that contains all the mythical magic from the original Voyager and adds a wealth of features not seen before in a Klon-style pedal.

From its lowest to highest settings, the Voyager provides a uniquely superb amount of clarity to any playing style. At lower gain settings, it brightens the signal and adds clarity to each note. With the gain turned up, the Voyager transforms into a thick overdrive, providing depth to chorded playing while retaining the clarity needed to break through solos.

The Voyager MKII breaks out of the traditional Centaur three-knob topography by adding a foot-switchable parametric mid-frequency EQ with a boost/cut range of +/-12dB. The Freq (Frequency) knob then controls the centre frequency of where the Mid knob is set, giving a range of 250Hz-2kHz. Great for accommodating any guitar and pickup combination and tailoring your tone to your own style of playing.

Further customize the Voyager's sound with the five-way rotary switch:
1. Classic 1N34A Germanium Diodes (most compressed). This is the original Voyager sound.
2. Classic 1N34A Germanium Diodes with bass boost (trust us).
3. Symmetric Silicon Diodes (more open and dynamic).
4. Asymmetric Silicon Diodes (least compressed, open & driven).
5. Asymmetric Silicon Diodes with bass boost (least compressed, open & driven with a bass boost.)

Think of each position as a different "flavour" of the pedal. Fine-tune each of these modes with the Mid/Freq EQ for a near-infinite supply of gain options.

Notes: The Voyager MKII is a mid-focused overdrive/preamp that contains all the mythical magic from the original Voyager and adds a wealth of features not seen before in a Klon-style pedal.

From its lowest to highest settings, the Voyager provides a uniquely superb amount of clarity to any playing style. At lower gain settings, it brightens the signal and adds clarity to each note. With the gain turned up, the Voyager transforms into a thick overdrive, providing depth to chorded playing while retaining the clarity needed to break through solos.

The Voyager MKII breaks out of the traditional Centaur three-knob topography by adding a foot-switchable parametric mid-frequency EQ with a boost/cut range of +/-12dB. The Freq (Frequency) knob then controls the centre frequency of where the Mid knob is set, giving a range of 250Hz-2kHz. Great for accommodating any guitar and pickup combination and tailoring your tone to your own style of playing.

Further customize the Voyager's sound with the five-way rotary switch:
1. Classic 1N34A Germanium Diodes (most compressed). This is the original Voyager sound.
2. Classic 1N34A Germanium Diodes with bass boost (trust us).
3. Symmetric Silicon Diodes (more open and dynamic).
4. Asymmetric Silicon Diodes (least compressed, open & driven).
5. Asymmetric Silicon Diodes with bass boost (least compressed, open & driven with a bass boost.)

Think of each position as a different "flavour" of the pedal. Fine-tune each of these modes with the Mid/Freq EQ for a near-infinite supply of gain options.

Notes: Introducing Catacombs - a pedal that eliminates the compromise altogether. It packs 11 of the most popular delay and reverb sounds into one intuitive, powerful package. Whether you're after a trusty digital delay and a plate reverb or a musical shimmer and a spaced out echo - Wampler have you covered!

The team at Wampler have worked for a long time on ensuring Catacombs will become an indispensable part of your rig. You can run one of six delay and one of five reverb programs together simultaneously. Each program offers tap-tempo control and can be saved into one of the pedal's eight onboard preset locations for instant recall. Delays and reverbs can be run in Mono, Stereo, in parallel or in series. It's like having a studio's worth of delay and reverb effects right at your feet.

But it doesn't end there - the pedal also comes with a complete software version as a plugin for your DAW in AAX, AU, and VST3 format for both Mac and PC. The Catacombs plugin is FREE to all customers that register their Warranty online (plugin suite is $49.99 if purchased separately).

Legendary Delays

With six delay programs, you can feel the warmth and depth of analogue delays (ANLG), the harmonic nuances of a Bucket Brigade Device delay (BBD), or the nostalgic modulated vibe of classic artisanal tape and mechanical delays (TAPE). Feeling adventurous? The other-worldly Echo-Space Delay (SPC) awaits. The favourite Wampler Faux Tape Echo (FTE) and an accurate recreation of the classic 2290 digital delay (DIGI) also feature.

Iconic Reverbs

The Catacombs houses five finely tuned reverb programs. With just a twist of a knob, you'll discover expansive halls (HALL), a warm vintage plate (PLT), and that classic spring reverb (SPR) with plenty of "drip." The shimmer reverb (SHMR) allows a whole new layer of sonic texture, especially when paired with an expression pedal, and the intimate ambiance of the ROOM setting creates that perfect studio reverb.

Stompbox-like Control

Like the Terraform and Metaverse before it, the Catacombs is designed to be as quick to dial in as possible. Wampler replaced confusing menus and fiddly touch screens with clearly marked knobs you can adjust on the fly. Controls for Time, Feedback, Modulation, and Level (with Alt functions for each effect type) put all the essential tools right at your fingertips. Each setting offers tap-tempo control and can be easily saved into one of the pedal's eight front panel preset locations for instant recall. It's like having a studio's worth of delay effects right at your feet.

Digital Power with an Analogue Soul

The Catacombs uses a high-performance DSP engine to bring each effect to life with authentic character and gives you eight front panel preset locations where you can save and instantly recall your favourite settings. If you're looking to expand even further, you can access up to 128 presets with full MIDI control, it has configurable mono and stereo routing, a parallel or series switch, and an assignable expression pedal input to control any parameter (or multiple parameters).

Notes: ***B-STOCK: Box opened, product in perfect working order***


Introducing Catacombs - a pedal that eliminates the compromise altogether. It packs 11 of the most popular delay and reverb sounds into one intuitive, powerful package. Whether you're after a trusty digital delay and a plate reverb or a musical shimmer and a spaced out echo - Wampler have you covered!

The team at Wampler have worked for a long time on ensuring Catacombs will become an indispensable part of your rig. You can run one of six delay and one of five reverb programs together simultaneously. Each program offers tap-tempo control and can be saved into one of the pedal's eight onboard preset locations for instant recall. Delays and reverbs can be run in Mono, Stereo, in parallel or in series. It's like having a studio's worth of delay and reverb effects right at your feet.

But it doesn't end there - the pedal also comes with a complete software version as a plugin for your DAW in AAX, AU, and VST3 format for both Mac and PC. The Catacombs plugin is FREE to all customers that register their Warranty online (plugin suite is $49.99 if purchased separately).

Legendary Delays

With six delay programs, you can feel the warmth and depth of analogue delays (ANLG), the harmonic nuances of a Bucket Brigade Device delay (BBD), or the nostalgic modulated vibe of classic artisanal tape and mechanical delays (TAPE). Feeling adventurous? The other-worldly Echo-Space Delay (SPC) awaits. The favourite Wampler Faux Tape Echo (FTE) and an accurate recreation of the classic 2290 digital delay (DIGI) also feature.

Iconic Reverbs

The Catacombs houses five finely tuned reverb programs. With just a twist of a knob, you'll discover expansive halls (HALL), a warm vintage plate (PLT), and that classic spring reverb (SPR) with plenty of "drip." The shimmer reverb (SHMR) allows a whole new layer of sonic texture, especially when paired with an expression pedal, and the intimate ambiance of the ROOM setting creates that perfect studio reverb.

Stompbox-like Control

Like the Terraform and Metaverse before it, the Catacombs is designed to be as quick to dial in as possible. Wampler replaced confusing menus and fiddly touch screens with clearly marked knobs you can adjust on the fly. Controls for Time, Feedback, Modulation, and Level (with Alt functions for each effect type) put all the essential tools right at your fingertips. Each setting offers tap-tempo control and can be easily saved into one of the pedal's eight front panel preset locations for instant recall. It's like having a studio's worth of delay effects right at your feet.

Digital Power with an Analogue Soul

The Catacombs uses a high-performance DSP engine to bring each effect to life with authentic character and gives you eight front panel preset locations where you can save and instantly recall your favourite settings. If you're looking to expand even further, you can access up to 128 presets with full MIDI control, it has configurable mono and stereo routing, a parallel or series switch, and an assignable expression pedal input to control any parameter (or multiple parameters).