Effects pedals

Notes: The Cosmic ECHO is an analogue-sounding LoFi delay that will work with just about anything you plug into it.

The dark, lush, moody tones of the ever-popular PT2399 IC provide an out-of-this-world experience. Our take on this classic pedal pushes the chip's limits so you can explore all the gritty elements drifting at the edge of long delay rates. It already outperforms other bucket brigade style echoes, but just to be sure, we added 2 momentary switches, Zone and Warp.

Dark, rich sounds with the analogue vibe of a tape echo.

Uses the PT2399 IC, a bucket brigade style emulation. This IC has 16-bit sampling for 30-300 milliseconds. After that, the sample rate goes down in relation to the delay length. This results in artifacts and noise being introduced into the audio for weird, cosmic, psychedelic sounds.

Delay length: 30ms-1,250ms

3 knobs: Feedback, Mix and Rate. The Mix is a wet-only control that attenuates the amount of delayed signal in the signal chain. The Rate controls the number of repeats in an organic-sounding way.

Warp button: Momentary pushbutton switch that gives a bright, "small speaker" tone.

Zone button: Momentary pushbutton switch that introduces feedback into the circuit momentarily. Great for adding rhythmic feedback and other strange sounds. The Zone amount can be adjusted by an internal trim pot.

Pedal may have a slight volume drop.

Great for shoegaze, surf rock, ambient and experimental sounds.

Pedal uses a 125B case

Dimensions (L x W x H): 4 7/8" x 2 5/8" x 2 3/16" (124mm x 67mm x 56mm).

Takes a 9V battery or 9V centre negative 2.1mm barrel power supply (not included).

Notes: Great for live performances! The Cosmic ECHO Squared is an analogue-sounding LoFi delay that will work with just about anything you plug into it.

The dark, lush, moody tones of the ever-popular PT2399 IC provide an out-of-this-world experience. Our take on this classic pedal pushes the chip's limits so you can explore all the gritty elements drifting at the edge of long delay rates. It already outperforms other bucket brigade style echoes, but just to be sure, we added 2 stomp switches, Blast and Warp.

The "Squared" version of the pedal is tailored to live guitar and keyboard performers. It has all the features of the original plus:

Expression pedal input over Rate
Warp and Blast ("Zone" on the Cosmic Echo) are now momentary stomp switches
Blast amount knob now accessible externally

Features:

Dark, rich sounds with the analogue vibe of a tape echo.

Uses the PT2399 IC, a bucket brigade style emulation. This IC has 16-bit sampling for 30-300 milliseconds. After that, the sample rate goes down in relation to the delay length. This results in artifacts and noise being introduced into the audio for weird, cosmic, psychedelic sounds.

Delay length: 30ms-1,250ms

4 knobs: Feedback, Mix and Rate, Blast Amount. The Mix is a wet-only control that attenuates the amount of delayed signal in the signal chain. The Rate controls the number of repeats in an organic-sounding way.

Warp button: Stomp switch that gives a bright, "small speaker" tone.

Blast button: Stomp switch that introduces feedback into the circuit momentarily. Great for adding rhythmic feedback and other strange sounds. The Blast intensity is adjusted with the Blast Amount knob.

Pedal may have a slight volume drop.

Great for shoegaze, surf rock, ambient and experimental sounds.

Pedal uses a 1590XX case.

Dimensions (L x W x H): 5 3/4" x 4 3/4" x 2 1/8" (146mm x 121mm x 54mm)

Takes a 9V battery or 9V centre negative 2.1mm barrel power supply (not included)

Notes: Diamond Pedals proudly announces the launch of the Dark Cloud, an innovative delay pedal that represents the pinnacle of hybrid analogue-digital design. Drawing on the company's rich heritage in crafting exceptional analogue effects, the Dark Cloud merges classic tone with cutting edge technology to deliver a delay pedal like no other.

At the heart of the Dark Cloud is Diamond's revolutionary Digital Bucket Brigade Delay (dBBD) technology, which seamlessly blends the organic warmth of analogue companding with the precise control of an embedded digital system. This unique architecture allows the Dark Cloud to deliver three distinct and creative delay modes (Tape, Harmonic and Reverse), each meticulously crafted to provide a wide range of sonic possibilities.

Where analogue warmth meets digital precision, the Dark Cloud redefines delay effects to create a pedal like no other.

The Dark Cloud holds special significance as the final project conceived by the original Diamond team before their closure. What began as a modest attempt to repurpose older designs evolved into a masterful blend of the company's most beloved delay algorithms, combined with an entirely new Reverse Delay setting.

As a result, the Dark Cloud is essentially a "greatest hits" of Diamond's delay technology, refined into one powerful pedal that pushes the boundaries of what delay effects can achieve.

Notes: The concept for Diamond Pedals' Boost/EQ began in the early 2000s, with a request for a 'compression-less' version of the famed Diamond Compressor - combining a clean boost circuit with the Compressor's Tilt EQ.

Nearly 20 years after the resulting original pedal's launch, we've re-imagined this idea on the same platform as the Comp/EQ. Introducing the next-generation Diamond Boost/EQ. This versatile, low-noise pedal delivers a punchy, dynamic sound that's ideal for any set-up

Taking the lively, high-fidelity gain stages of the Comp/EQ, the Boost/EQ offers plenty of punch while maintaining clarity and transparency. While the Tilt and Mid controls give you complete freedom to sculpt your tone. Need more sparkle? Dial it in with the Tilt knob. Looking for a midrange boost to cut through your solos? The Mid control has you covered. Want to make your Marshall tone a bit more Fenderesque? It's all possible with Diamond's Boost/EQ.

In addition, the Boost/EQ features a second mode that provides a low-gain overdrive - transparent, yet full of character. This makes the Boost/EQ the ultimate Swiss Army knife for your pedalboard, combining clean boost, tone shaping and overdrive, into one powerful and versatile pedal.

The Boost/EO offers 2 distinct modes of operation. The first is a clean boost mode designed to increase the output of your signal enabling you to beef-up low-output pickups, drive tube amps and dirt pedals for increased sustain and saturation or simply have your solos jump out in the mix.

Set to the OD mode, the gain structure of the pedal is modified and soft clipping diodes are added to the circuit. This provides smooth, transparent, musical distortion that ranges from just a touch of hair and harmonic overtones, to a nice low to mid gain overdrive. Depending on where your Boost/EO is placed in your signal chain, it will either deliver an increase in volume or distortion/saturation. Place it at the end of your pedal chain or in an amp's series FX loop for a volume boost. Put it in front of your drives and fuzzes for more gain and distortion.

Notes: The original Diamond VIBRATO was conceived in late 2006 with a simple yet ambitious idea: crafting an analogue, true-pitch Vibrato pedal, built around the revered MN3007 bucket brigade chip and promptly became one of the world's most coveted and sought-after Vibrato pedals.

Now, nearly two decades later, the new Diamond VIBRATO is not only back - it's better than ever. This latest and greatest version of the VIBRATO incorporates decades-worth of end-user feedback, better tech, maximum efficiency, modern features, a meticulous redesign for enhanced player experience and the signature Diamond quality that made the original pedal so great.

This reinvented and coveted classic is now available in an updated, compact package, plus the first run of 800 pedals is equipped with NOS Panasonic MN3007 BBDs.

Half the size, all the sound

Don't let the size cause you to underestimate the power packed within. We've managed to stuff all the VIBRATO's analogue audio path, Compandor and BBD Delay circuits in pedalboard-friendly sized enclosure. By using dual stacked PCB's, we've not only optimised space but also enhanced the isolation of the audio path from the power and switching circuits. Add top jacks, soft-touch True Bypass switching, and standardized negative-centre 9-18 V DC input with polarity and over-voltage protection for a bulletproof pedal ready for any gig.

Analogue BBD delay line

At the heart of this pedal lies the revered MN3007 Bucket Brigade Delay chip, renowned for its ability to create the rich, organic, and warbling Vibrato & Chorus tones which make the sounds of the 70s and 80s guitar icons. The MN3007 infuses its signature character to your guitar signal-delivering a natural, liquid-like pitch modulation with a rounded vintage texture and mojo that is missing from modern digital counterparts.

Compander magic

The Compandor Circuit adds warmth and complexity by controlling your dynamics. Acting as both a compressor and expander, it not only gives the VIBRATO its signature feel and response but also reduces much of the noise inherently found in BBD technology. Borrowed from the Memory Lane Jr., the updated compandor design in the VIBRATO provides increased clarity, less distortion and is pre-trimmed therefore will never have to be recalibrated.

Input voltage

While the original VIBRATO could only be powered by an 18 V DC reverse polarity power supply (internally regulated to 15 V DC) - the new VIBRATO offers a much more versatile 9-18 V DC operating range. The voltage is internally regulated based on the power input and as a result, the pedal will sound slightly different depending on operating voltage as the clock frequency will shift.

For classic, pristine and lush Diamond VIBRATO tones with added headroom, power the pedal at 18VDC like the original. Powering it at 9 V DC will add a bit more colour and warble - much like the "High Mode" in the original big-box VIBRATO. You can take advantage of the added range or just dial back the depth. Better yet, grab a Cioks power supply and try it at 12VDC or 15VDC regardless of what you settle on, the Diamond VIBRATO will sound great! As always, it is recommend that you use a good quality, isolated power supply.

Notes: The Golden Boy Mini - the epitome of versatile and transparent overdrive, designed in collaboration with the renowned guitarist Joey Landreth. With its exceptional harmonic detail and abundant headroom, this compact overdrive pedal takes the concept of transparent overdrive to new heights, using a simple and powerful interface.

The Golden Boy Mini is the perfect addition to any guitarist's arsenal, allowing you to shape and enhance your tone in ways you've never imagined. Its transparent nature ensures that your core tone remains intact, while adding a dynamic of warmth, richness, and depth that elevates your playing to new levels.

Its intuitive controls allow you to dial in the perfect blend of overdrive, from subtle grit to soaring, harmonically rich tones. The pedal's wide-ranging gain control ensures that it can adapt to any musical style or genre, whether you're playing delicate fingerpicked melodies or unleashing blistering solos. Pair it with Asymmetrical or Led Clipping and put the final touches with it's 3-band Baxandall-style EQ.

Beyond its exceptional sound, the Golden Boy Mini is built to withstand the rigors of the road. Its rugged construction and top-quality components ensure reliability and durability, making it a reliable companion for both studio sessions and live performances.

Whether you're a seasoned professional or an aspiring guitarist, the Golden Boy Mini will transform your tone and ignite your creativity.

Discover the Golden Boy Mini and unlock the true potential of your guitar tone. Order yours today and witness the power of transparent overdrive like never before. Elevate your sound and embark on a sonic journey with the GOLDEN BOY Mini!

Notes: An original creative take on delays, looping, reverb and modulation, the Technician combines various digital programs to create a hugely versatile all-round audio tweaking toolbox.

Supplier's Notes:
Delay modes

Digital

Starting as a crisp digital delay, this mode, when paired with the tap footswitch, covers a lot of ground for your delay needs. The "Red" modulator lets you adjust the dampening of the delay, making the repeats either brighter (emulating towards a tape or HIFI sound) or darker

Reverse

Instead of reading the delay buffer in a forward direction like the "Digital" delay we read the buffer backwards creating unique sound possibilities. You can further modify this sound with the "Red" modulator to adjust the dampening of the repeats to grow brighter or darker.

Granular

Takes the delay buffer and chops it up into "Grains" and then plays those grains back. The size of the grains, direction (forward/reverse), the speed (pitch) and location in the buffer is all randomized so every time you experience this mode it will be a unique exploration into granular synthesis. The "Red" modulator allows you to adjust the max size of the randomized "size" of the grains and the amount of grains from 1-5.

Re-sample

What if you want a more complex soundscape like other instruments are playing with you? Re-sample accomplishes this by playing the delay buffer at different speeds which changes the pitch and timing of the delayed phrases creating a more complex musical expression of what you are playing. "Red" lets you adjust the mix of the octave down and the octave up.

Reverb modes

Hall

The least diffused of the reverb modes "Hall" allows you hear the reflective nature of the hallway your sound is in.

Plate

Emulating a classic plate reverb sound that is diffuse and reflective.

Chasm

An exploration into reverb design feedback networks that can allow for unnaturally large decay lengths.

Grim

Takes the "Chasm" mode and splits the output to a parallel octave down so you get the normal output + the octave down for a deep rich soundscape.

Looper modes

Gives you latching control over the rec/dub of your looper.

Momentary

Only rec/dub while holding the rec/dub switch.

Quantise

Works like the latching but will trim your loop to a division of the existing delay time.

MOD ONE and MOD TWO allow you adjust the following modulators

Modulators

Delay

Vibrato - an asymmetrical modulation of the reverbs pre-delay to create sonically pleasing movement in your reverb.
Auto-Filter - takes control of the "Filter" DSP block and modulates it with an LFO. Adjust the "Resonance" of the "Filter" block to get a more dramatic effect.
Shimmer - Adds an octave feedback path in each reverb mode and can be octave down or octave up.
Dampening - adjust the LPF and HPF of the reverb feedback path drastically changing the tone and how the reverb reacts to input.

Reverb

Vibrato - an asymmetrical modulation of the reverbs pre-delay to create sonically pleasing movement in your reverb.
Auto-Filter - takes control of the "Filter" DSP block and modulates it with an LFO. Adjust the "Resonance" of the "Filter" block to get a more dramatic effect.
Shimmer - Adds an octave feedback path in each reverb mode and can be octave down or octave up.
Dampening - adjust the LPF and HPF of the reverb feedback path drastically changing the tone and how the reverb reacts to input.

Looper

Clock: fine detail adjustment of the speed and direction of the clock.
Quantized Clock: Quantized adjustment of the speed and direction of the clock locked to octave intervals.
Loop Start: Adjust the starting point of the loop.
Loop End: Adjust where the loop will end.

MIDI: 3.5MM IN/OUT
USB: USB-C
Expression: TRS input

Controls

MIX (mod one)- The mix of the Reverb DSP block
DECAY (mod two)- The time it takes for your instruments reverberations to fade away, or die.
FEEDBACK (mod two)- How many repeats the delay will have
MIX (mod one)- The mix of the Delay DSP block
CLOCK (pre-delay)- Adjusts the "size" of the reverb DSP block
MIX (mod one)- The mix of the Looper DSP block
FREQUENCY (resonance)- Adjusts the Frequency of the Filter DSP block
TIME (dry mix)- Set the time of the Delay DSP block up to 2 sec

Modifiers

Reverb Mode (modulators)- Sets what Reverb Algorithm is active
Looper Mode (modulators)- Sets how you control the Looper DSP block
Tap Division (effect order)- Sets which tap division is active for the Delay DSP block. 1/2: Half note, 1/4: Quarter note, .1/8th: Dotted eighth note, 1/8th: Eighth note
Delay Mode (modulators)- Sets which Delay Algorithm is active

Input/Output: Stereo / mono - stereo / stereo - mono / parallel mono
Bypass: True Bypass / Tails
Power: 9v 400MA
Dimensions: 4.8 x 5.5
MIDI: Yes. 3.5mm Jack
USB: Yes
Jacks: Top Mounted Input And Output Jacks

Notes: Jackson Audio presents the TWIN TREM, a pedal that features two distinct tremolo effects: a Harmonic Tremolo on the right side and an Optical Tremolo on the left side. Each tremolo is equipped with independent Speed, Depth and Volume controls and can be used separately as stand-alone effects (or combined) to create rich, unique and percussive sounds.

Each tremolo side has different LED indicators (red for Harmonic, blue for Optical and magenta for Combined). These LEDs also visually display each section's speed, making it easy to sync the two tremolos together.

The TWIN TREM boasts four top-mounted jacks, allowing versatile signal routing. You can run it like a standard pedal, routing the signal in through the first jack and out through the last. Alternatively, you can route the signal through the Harmonic side first, pass it through a reverb or another effect, and then into the Optical side, preserving the classic placement of optical tremolo after reverb, just like in many amplifiers.

These routing options opens up endless possibilities for integrating the TWIN TREM with other effects in your signal chain. If you have a stereo setup, the right side can run through the Harmonic tremolo, while the left side passes through the Optical.

In addition, offering comprehensive control over pre- and post-effects tremolo placement all helps to make the TWIN TREM an essential tool for building a complete rig.

Notes: Re-Built from the ground up - a complete redesign of the original Lo-Fi Delay.

Enter the realm of sonic exploration with Colortones LO-FI DELAY. Featuring three distinct delay voicings, the LO-FI DELAY is a grainy lo-fi, old-school analogue tape sounding dub style delay engine with momentary oscillation feedback and speed switching options.

At its core the LO-FI DELAY is a tempo synchronized dual channel delay with each channel having independent Regen and Time controls.

Controls include Delay Time, Regen, Feedback, Mix and a 'Splash' footswitch to momentarily send the delay into a predetermined amount of regenerative feedback and or Tempo Change.

The SPLASH footswitch also acts as a Tap Tempo control requiring at least 4 quick taps to calculate a new tempo.

Controls

Wet | Dry Switch

Wet Mode acts like a normal delay where the delayed repeats can be mixed against the Dry Signal with the decay time set by the Regen knob. When the SPLASH Footswitch is momentarily pressed the decay time switches to the Regen+ knob setting allowing for more or less regenerative delays while the footswitch is pressed.

Dry Mode is designed for running in a quite mode and only activating the delay while the SPLASH footswitch is held down. Great for adding dub style accents to certain stabs / phrases or adding splashes of ambient delay or moments of crazy feedback to an otherwise Dry signal.

Hi-Fi | Lo-Fi Switch

Hi-FI mode has a crisp hi-fidelity non-destructive repeated delay.

The centre and down positions are Lo-Fi modes where the resulting delay repeats are a little darker like a tape delay with a slight hint of mechanical tape warble. The Centre position uses a Lowpass filter in the delay feedback line where as the Down position uses a HighPass filter.

Division Knob

The Div knob sets the alternative delay speed when Splash is pressed while in Wet Mode. At 3 O'Clock Repeats are at Unity 1:1. Turning anticlockwise the repeats are Multiplied (Faster) in by either x2 or x3. Turning Clockwise from unity the repeats are divided (slower) by either 2 or 3.

Tech Specs:

True Bypass
Current Draw: 145mA
Input Voltage: 9V DC (center negative)
external power supply not included

Notes: How It Works

Chaining up an EQ, compressor and overdrive pedal will never give you the same result as SkarBassOne achieves, not by a long shot! The precise filters in SkarBassOne is what gives you the extremely surgical tone and the wide range of possibilities without breaking a sweat!

No matter the settings you will always keep the clean powerful low end with this multiband overdrive and that is a must for bass. Controlling the mids of a bass sound has never been easier! You will get out of the way from other instruments masking frequencies and take up all the space that is ment for you and ONLY you!

It might look simple on the outside, but I assure you the inside is a matrix of years with development. The flexible multiband drive is smooth all the way thru it's range and I promise you it will never ever mess with your low end!

Details

Compression:

One knob FET compressor with fast attack and release. It handles dynamics with ease and creates a solid wall of tone.

Compression LED:

Visual indication of how hard the compressor is working.

Mid:

Mid filter to achieve the surgical studio tone! Create a defined, in the pocket frequency response for the bass to sound massive and to make it sit with other instruments. Your band mates will never beg you to turn down your bass again!

Mix:

Quickly set the tonal balance between low frequencies and high frequencies. Find the sweet spot in any situation.

Footswitch:

On/Off switch for Drive and Tone.
Red channel =Drive and Tone active.
Blue channel = Drive and Tone off.
Compression, Mid and Mix is active on both channels.

Drive:

Set the amount of multiband drive, from gentle push to full on bark!

Tone:

Hi-cut filter to control the high frequencies of the output.

Notes: Reach Infinity

Let's dive into a Black Hole!

The Black Hole Symmetry is a Modulated Delay / Pitch shifted Reverb / Destruction Fuzz pedal.

Travel through the Ergosphere, the Event Horizon and the Singularity. The 3 parts of the pedal which can be played together or separetely.

Each pedal is designed, assembled, tested and numbered by hand in the Collision Devices workshop in France.

The B.H.S. has a lifetime warranty.

3 effects, one pedal

Singularity

Destruction Fuzz
The single setting "Disintegrate" allows you to raise your sound.
Forget the fact that your drummer plays loudly.
Settings :
Desintegrate : Volume setting with a huge fuzz.
Protect your ears please.

Event horizon
Pitch shifted Reverb
Long reverb based on the FV1 chip.
Harmonizes the reverb signal with a pitch shifter.

Settings:
Mix: Proportion of wet signal in the mix
Echo: Echo time (max 15s)
Radiancy: Proportion of pitch shifter in the echo signal
Pitch: Shifts the pitch of the note

Ergosphere
Modulated Delay
Based on the PT2399 chip to have a warm echo.
The echo signal is modulated by two oscillators.

Settings:
Mix: Proportion of wet signal in the mix
Time: Time between each repetition (From 0s to 1s)
Feedback: Number of repetitions
Modulation: Proportion of modulation in the delay signal
Speed: Speed of the main oscillator
Trimmer: Speed of the triangle oscillator

Specifications

Maximum current draw: 250 mA
Input Impedance: 1 MOhm
Size: 186 x 119 x 56mm

The use of an isolated power supply is recommended for powering all Collision devices Pedals.

Power supply not included.

The pedal is true bypass

Lifetime warranty

Voltage: +9V DC (negative center)
Output Impedance: 1 KOhm
Weight: 200 grams

Notes: TARS DLX is a dual fuzz with 2 analogue filters inspired by the MS-20.

Probably the only pedal with 4 poles - resonant - Low Pass and High Pass Filters.

It is a stage & studio tool to shape your sound with high precision or an experimental device for loud noise makers.

It is an evolved version of TARS, a robot looking for life in space too. (and a pedal we released a year ago).

Notes from the designers :

Collision Devices took TARS and we pushed it forward.

The Fuzz circuit has been reworked to be opened in high end - so that it can now sound amazing as a low gain fuzz/distortion. The creamy one we all like in those post-hardcore riffs. It is also more aggressive when Gain is maxed out.

+ Collision Devices worked another fuzz (BLAST) which feedbacks a part of the circuit to give this "burning" feeling for HUGE and abrasive sounds.

The frequency response from both filters has been improved to better work on very low end sources with subby bass sounds.

TARS DLX can be used as clean blend on bass or in insert of a track mix.

The "ADD FUZZ" configuration which is found nowhere else is better than ever with the addition of the high pass after the low pass. It adds a filtered fuzz to the fuzz signal so that the filters can be used as EQ shape / phasing effects. This is amazing.

Of course, Fuzz and filters can be used separately in parallel or in serial. This truly is a beast of a dirt and filtering pedal.

Notes: The Singularity is basically the fuzz section from the Black Hole Symmetry which is unique in sending the signal through a JFET transistor then 3 silicon transistors to end up being destroyed!

The Singularity keeps the look and fun of the Disintegrate setting to a single output volume control and adds a 3-position toggle switch to cut the output Low-Pass filter at 3 different frequencies.

Controls

Volume: Fuzz level.
3-position switch: Low-Pass filter frequency at 1.5 kHz (BHS style), 3.3 kHz, 16 kHz.

Notes: The Singularity is basically the fuzz section from the Black Hole Symmetry which is unique in sending the signal through a JFET transistor then 3 silicon transistors to end up being destroyed!

The Singularity keeps the look and fun of the Disintegrate setting to a single output volume control and adds a 3-position toggle switch to cut the output Low-Pass filter at 3 different frequencies.

Controls

Volume: Fuzz level.
3-position switch: Low-Pass filter frequency at 1.5 kHz (BHS style), 3.3 kHz, 16 kHz.

Notes: The GALACTAVISE is Allpedal's flagship compressor. Built with the musician's needs in mind, it boasts an uncompromisingly sweet compressor circuit with a Mix control for dialling in that perfect balance of compressed tone and clean tone.

The top end can often be make or break with many compressor circuits, so AllPedal also added the ability to adjust just the right amount with the Presence control. Made with the highest quality components for a low noise floor and road-worthy durability.

Let the GALACTAVISE blast your tone into orbit!

GALACTAVISE is the best guitar compressor pedal for musicians seeking to balance their sound's dynamics. As the best compression pedal on the market, it allows guitarists to control their volume levels efficiently, ensuring a consistent sound output. This guitar compression pedal is an essential tool for both studio recording and live performance.

As with all their effect pedals, AllPedal took special care in the GALACTAVISE's aesthetics with its finish, sophisticated artwork and anodized knobs.

GALACTAVISE is proudly made by hand in Paducah, KY in the USA using the latest cutting-edge technology in the pursuit of ultimate tone.

Notes: The Larva is a 6-stage analog phaser with a built-in preamp and morphing capabilities. It offers two phaser settings, letting you easily switch between different sounds or morph between them for unique transitions. Whether used as a classic phaser, a vibe pedal, or just a preamp, the Larva delivers versatility and creative possibilities, always with the Beetronics unique signature.

The interface is intuitive and simple, yet the pedal can produce a huge amount of sounds and movements unique to this phaser. A bar of LEDs tracks the ramp movement, showing if you're in phase one or two, while the bypass LED doubles as a meter to monitor preamp distortion.

As our first phaser, the Larva brings together a large swathe of creative options with a streamlined, user-friendly design-modulation sweetness with a touch of gain.

Notes: The Nectar "Tone Sweetener" strikes aperfect balance between versatility and simplicity. It offers a wide range of tones, spanning from a vintage tweed-style crunch to a full-bodied overdrive, and even a modern high-gain fuzz that pairs wonderfully with any guitar, pedal or amp.

Use the mode toggle to switch between the DRIVE and FUZZZ modes, while the LEDS indicate the selected mode, even when the effect is bypassed. Fine-tune your sound with the TASTE control to set the perfect eq for each guitar or amp.

The Nectar's responsiveness is truly unparalleled, like a delicate bee collecting pollen. Every nuance of your playing is enhanced and sweetened in the best way possible, with plenty of headroom.

True Bypass Design
Power requirement: 9V, 30mA
Made in California, USA

Notes: ***B-STOCK: Box opened, product in perfect working order***


Introducing Catacombs - a pedal that eliminates the compromise altogether. It packs 11 of the most popular delay and reverb sounds into one intuitive, powerful package. Whether you're after a trusty digital delay and a plate reverb or a musical shimmer and a spaced out echo - Wampler have you covered!

The team at Wampler have worked for a long time on ensuring Catacombs will become an indispensable part of your rig. You can run one of six delay and one of five reverb programs together simultaneously. Each program offers tap-tempo control and can be saved into one of the pedal's eight onboard preset locations for instant recall. Delays and reverbs can be run in Mono, Stereo, in parallel or in series. It's like having a studio's worth of delay and reverb effects right at your feet.

But it doesn't end there - the pedal also comes with a complete software version as a plugin for your DAW in AAX, AU, and VST3 format for both Mac and PC. The Catacombs plugin is FREE to all customers that register their Warranty online (plugin suite is $49.99 if purchased separately).

Legendary Delays

With six delay programs, you can feel the warmth and depth of analogue delays (ANLG), the harmonic nuances of a Bucket Brigade Device delay (BBD), or the nostalgic modulated vibe of classic artisanal tape and mechanical delays (TAPE). Feeling adventurous? The other-worldly Echo-Space Delay (SPC) awaits. The favourite Wampler Faux Tape Echo (FTE) and an accurate recreation of the classic 2290 digital delay (DIGI) also feature.

Iconic Reverbs

The Catacombs houses five finely tuned reverb programs. With just a twist of a knob, you'll discover expansive halls (HALL), a warm vintage plate (PLT), and that classic spring reverb (SPR) with plenty of "drip." The shimmer reverb (SHMR) allows a whole new layer of sonic texture, especially when paired with an expression pedal, and the intimate ambiance of the ROOM setting creates that perfect studio reverb.

Stompbox-like Control

Like the Terraform and Metaverse before it, the Catacombs is designed to be as quick to dial in as possible. Wampler replaced confusing menus and fiddly touch screens with clearly marked knobs you can adjust on the fly. Controls for Time, Feedback, Modulation, and Level (with Alt functions for each effect type) put all the essential tools right at your fingertips. Each setting offers tap-tempo control and can be easily saved into one of the pedal's eight front panel preset locations for instant recall. It's like having a studio's worth of delay effects right at your feet.

Digital Power with an Analogue Soul

The Catacombs uses a high-performance DSP engine to bring each effect to life with authentic character and gives you eight front panel preset locations where you can save and instantly recall your favourite settings. If you're looking to expand even further, you can access up to 128 presets with full MIDI control, it has configurable mono and stereo routing, a parallel or series switch, and an assignable expression pedal input to control any parameter (or multiple parameters).

Notes: The Faux Spring Reverb has been a staple on many players boards for many years now, and when it was discontinued a few years ago Brian Wampler received numerous requests to bring it back since then. Not being one to be content with just reissuing something, Brian decided to take all of the feedback from players he had received and give it a bit if an upgrade.

The result was the birth of the Mini Faux Spring Reverb. Following the idea of - If it's not broke, don't fix it - he just added more of what players love. More decay, more drippiness and more of that bouncy spring tone players love in the bigger Reverb tanks. Despite sounding bigger and fuller, he decided to condense it down into a mini enclosure to fit perfectly at the end if any chain to grab and go.

When the moment calls for the sound of spring reverb, you'll be glad you have this little guy. With an extended decay time, the Mini Faux Spring Reverb pedal serves up authentic tones that drip with boing (Don't you love spring reverb adjectives?) just like a great spring tank. And thanks to an easy-to-navigate control layout, you'll have your perfect tone pulled up in no time.

For years, the Wampler Faux Spring Reverb was the very best spring reverb pedal available, Brian Wampler updated it, made it smaller, made it bouncier - made it even more perfect for your rig!

There no denying the popularity and convenience of this pedal's mini design. Not only does it fit wonderfully on even the most cramped pedalboards, but it's easy to throw in the back of your open-back combo when running in the amp's effects loop.

Brian Wampler's attention to detail and commitment to bringing you the best-sounding & most usable Effects Boxes on the market is nothing new. Those qualities are on full display within the Mini Faux Spring Reverb. We're all tone-freaks, and we're always trying new things, but we hope this pedal finds it's forever home on your pedalboard, so we built it to last that long.

Technical Details

Built in the U.S.A.
High-grade components picked for their superior sound and response
True bypass Small profile, ideal for pedal board placement
Signal is split, core tone is unchanged through the pedal, the effect is laid on top of your tone
Volume, Depth, and Tone control allowing you full control of your reverb trail
9v power jack (no battery connector inside)
3PDT True Bypass
Includes Wampler's limited 5-year warranty
Power draw: 64.3mA (at 9v) and 69.5mA (at 12v)
1.50" x 3.50" x 1.5" (38.1mm x 88.9mm x 38.1mm) - height excludes knobs and switches

Notes: ***B-STOCK: Box opened, light surface marks, product in perfect working condition ***


The classic Pantheon pedal gets even better with this Deluxe version. Two independent overdrive circuits give you classic Blues Breaker-style tone plus modern boutique sounds.

Supplier's Notes:
The now legendary Wampler Pantheon provided a unique interpretation of the classic "Blues Breaker" style stomp box, by capturing all the tonal nuance of the original, but with added flexibility and style. In doing so, it found its way onto thousands of pedalboards across the world. Enter the new Pantheon Deluxe - a dual overdrive pedal that takes this evolution several steps further by offering a flexible design with two completely independent Pantheon circuits, one voiced as a classic blues breaker and one with a more modern boutique sound. This palace of tone delivers a staggering 200 combinations of gain settings, featuring dual Inputs and Outputs, and for the first time ever, Wampler have added MIDI channel switching to one of their gain pedals.

The Pantheon Deluxe lets you dial in two channels of organic creamy gain, gritty overdrive, or heavy distortion while retaining Wampler's famous ease of use and flexibility. Channel 1 delivers a classic Blues Breaker tone, Channel 2 is a recreation of the original Pantheon, a similar circuit to the Blues Breaker but with a modern boutique feel. Independent side mounted Voicing and Gain Level switches allow you to further shape your tone to perfection.

DOUBLE UP

The Pantheon Deluxe lets you dial in two channels of organic creamy gain, gritty overdrive, or heavy distortion while retaining Wampler's famous ease of use and flexibility. Channel 1 delivers a classic Blues Breaker tone, Channel 2 is a recreation of the original Pantheon, a similar circuit to the Blues Breaker but with a modern boutique feel.

ALWAYS THE RIGHT FIT

Each Channel of the Pantheon Deluxe Dual Overdrive feature independent Gain, Level, Treble, and Bass controls to enhance the shaping of your tone. The Baxandall-style active Bass control is neutral at noon but boasts an extremely powerful sweep as you move through the range. A single global Presence control simultaneously alters each channel to add just the right amount of top-end chime to suit different guitars and amplifiers - perfect for when playing live or when in the studio.

MAXIMUM CONNECTIVITY

With the addition of MIDI In and Out, you can now also switch the analog channels of each circuit on and off with a MIDI switcher - saving you valuable hardware loops on your loop switcher. With dual analog inputs and outputs, you can split both channels in a loop switcher, insert pedals between each side, or run in stereo.

BUILT FOR FOREVER

Brian Wampler's attention to detail and commitment to bringing you the best-sounding & most usable Effects Boxes on the market is nothing new. Those qualities are on full display within the Pantheon Overdrive. We're all tone-freaks, and we're always trying new things, but we hope this pedal finds its forever home on your pedalboard, so we built it to last that long.

TECHNICAL DETAILS

Built in the U.S.A
Dual Independent drive channels using Brian Wampler's classic Pantheon circuits; Channel 1 Classic Blues Breaker voicing, Channel 2 Modern Boutique voicing.
Independent Volume, Gain, Treble and Bass controls for both channels, global Presence control, front mounted Channel Order Switch, side mounted independent Gain Level and Voicing switches, MIDI In and Out (3.5mm TRS) and 2 sets of input and output jacks.
Top-mounted jacks make pedalboard placement effortless
Power draw: 55mA
9-18V power jack: DC supply only, do not exceed 18V DC, battery Included.
Includes Wampler's limited 5-year warranty
5" x 4.5" x 1.5" (88.9mm x 114.3mm x 38.1mm) - height excludes knobs and switches

Notes: When Wampler decides to jump into the multiFX market, they do it in style. 11 custom designed effects blocks, from Flanger to Phaser, Chorus to U-Vibe, Harmonic Tremolo to Envelope Filter, you know everything about it is going to be perfect.

In one incredibly small package, you can control any of the 8 presets via midi, you can assign an expression pedal to control ANY of the main five controls, you can run it in full glorious stereo or keep it in mono - you can even split that mono signal to route some effects to go before your drive pedals, or amp gain, and have the rest follow behind or in your effects loop!

When you put the Terraform into your rig, you know that not only will you get that legendary Wampler tone, but you will get the most easy to use, hugely versatile and best sounding collection of modulations you could ever want.

Each of the 11 effect blocks have been designed and realized in-house by the tone chasing freaks at Wampler. Each one has been inspired by many individual stomps, both modern and vintage, to bring you the best version of them all.

There are 8 presets to store your favorite sounds - you can recall them via the fully mappable midi, via the button on the front and even from the stomps! The expression pedal can control ANY of the 5 controls and you can even set the heel and toe point!

If you want true Stereo, you got it - You want basic mono, you got it.. You can even split that mono signal so you can put some effects in front of your drive section and the others behind, or going into the front of your amp with the rest in the effects loop. However you like to route your signal, the Terraform has you covered.

Brian Wampler's attention to detail and commitment to bringing you the best-sounding & most usable Effects Boxes on the market is nothing new. Those qualities are on full display within the Terraform. We're all tone-freaks, and we're always trying new things, but Wampler hope this pedal finds it's forever home on your pedalboard, so it was built to last that long.

Technical Details

Built in the U.S.A.
High grade components picked for their superior sound and response
Relay true bypass with soft switch (buffered bypass in trails mode)
Top mounted input and output jacks 9v power jack
Power draw: 64mA (at 9v) and 68mA (at 18v)
Allows for you to use reverb and two delays simultaneously
Maximum 1 second delay
Second delay can be layered on top in 3 different patterns
Relay True/Buffered Bypass
Includes Wampler's limited 5-year warranty
2.50" x 4.50" x 1.5" (63.5mm x 114.3mm x 38.1mm) - height excludes knobs and switches

Notes: How many times have you sat in front of your favorite ambient pedal and felt like you need weeks of training at NASA to use it? Knobs, switches, sliders - It's often SO hard and frustrating to find a usable tone on those things quickly - Keeping that firmly in mind, when Wampler first considered making an ambient pedal, ease of use was a top priority, right up there with top tier quality tone on par with pedals at twice the price.

How do you describe a pedal like the Wampler Ethereal? Does ambient heaven cover it? Is it the gateway between real life and the astral plane? Or is it just gorgeous? It's hard to know which phrase to use when talking about it, because they all match it perfectly - plus, of course, so easy to use you'll be getting those perfectly Ethereal tones instantly.

When designing the Ethereal these were the EXACT thoughts running through the mind of Brian Wampler. He wanted to make a delay that is as pure as you could want, with a time of up to 1s, a reverb that is thick and then have the option to mix them all up and put them together in one glorious effect that will send you away - all the way away while making it as easy to use and easy to find those perfect tones as possible.

It's been a bit of a secret, there isn't one delay lurking within the Ethereal, there are two! The first delay constantly sits there like a heartbeat, coming back at you at quarter notes, Wampler then layer another over the top - that one can be put into a triplet pattern, or a dotted 8th (so you can get that beautiful quarter + dotted 8th mix) and even a self-oscillating dotted eighth pattern that just takes you away and leads you over the edge and down the rabbit hole into perfect ambience - Things can get a little crazy when that one is selected, so you know, knock yourself out - it's there to make some incredibly strange yet beautiful sounds - See that little switch down there? Yep, that's the one, just to the right of the stomp - that's a trails button. When this is used the delay patterns and reverbs sing out after the pedal has been deactivated, so you can even control what you want to come back at you.

While you are enjoying the delay patterns, sitting underneath is that beautifully cavernous plate style reverb that is alive with character and shape, that can be brought in to exactly the right level (whether that be under your guitar, the same level - unity, or even considerably louder) to compliment the delay.

As you can imagine, this has been some feat of engineering (definitely worth waiting for) as we wanted all this to happen from a regular sized box, with the purity of tone and response you would expect from a Wampler. So, as with our other time pedals, we split the signal going in, the effected signal is then laid back on top of the original base tone, making sure that YOUR guitar sounds exactly how it does going in.

The Wampler Ethereal. Not only can it be used a stand alone reverb or delay pedal, it can be combined for you to worship, to get lost in, to even help you inspect your shoes - but most of all, it was designed to inspire.

Technical Details

Built in the U.S.A.
High grade components picked for their superior sound and response
Relay true bypass with soft switch (buffered bypass in trails mode)
Top mounted input and output jacks 9v power jack
Power draw: 64mA (at 9v) and 68mA (at 18v)
Allows for you to use reverb and two delays simultaneously
Maximum 1 second delay
Second delay can be layered on top in 3 different patterns
Relay True/Buffered Bypass
Includes Wampler's limited 5-year warranty
2.50" x 4.50" x 1.5" (63.5mm x 114.3mm x 38.1mm) - height excludes knobs and switches

Notes: Introducing Catacombs - a pedal that eliminates the compromise altogether. It packs 11 of the most popular delay and reverb sounds into one intuitive, powerful package. Whether you're after a trusty digital delay and a plate reverb or a musical shimmer and a spaced out echo - Wampler have you covered!

The team at Wampler have worked for a long time on ensuring Catacombs will become an indispensable part of your rig. You can run one of six delay and one of five reverb programs together simultaneously. Each program offers tap-tempo control and can be saved into one of the pedal's eight onboard preset locations for instant recall. Delays and reverbs can be run in Mono, Stereo, in parallel or in series. It's like having a studio's worth of delay and reverb effects right at your feet.

But it doesn't end there - the pedal also comes with a complete software version as a plugin for your DAW in AAX, AU, and VST3 format for both Mac and PC. The Catacombs plugin is FREE to all customers that register their Warranty online (plugin suite is $49.99 if purchased separately).

Legendary Delays

With six delay programs, you can feel the warmth and depth of analogue delays (ANLG), the harmonic nuances of a Bucket Brigade Device delay (BBD), or the nostalgic modulated vibe of classic artisanal tape and mechanical delays (TAPE). Feeling adventurous? The other-worldly Echo-Space Delay (SPC) awaits. The favourite Wampler Faux Tape Echo (FTE) and an accurate recreation of the classic 2290 digital delay (DIGI) also feature.

Iconic Reverbs

The Catacombs houses five finely tuned reverb programs. With just a twist of a knob, you'll discover expansive halls (HALL), a warm vintage plate (PLT), and that classic spring reverb (SPR) with plenty of "drip." The shimmer reverb (SHMR) allows a whole new layer of sonic texture, especially when paired with an expression pedal, and the intimate ambiance of the ROOM setting creates that perfect studio reverb.

Stompbox-like Control

Like the Terraform and Metaverse before it, the Catacombs is designed to be as quick to dial in as possible. Wampler replaced confusing menus and fiddly touch screens with clearly marked knobs you can adjust on the fly. Controls for Time, Feedback, Modulation, and Level (with Alt functions for each effect type) put all the essential tools right at your fingertips. Each setting offers tap-tempo control and can be easily saved into one of the pedal's eight front panel preset locations for instant recall. It's like having a studio's worth of delay effects right at your feet.

Digital Power with an Analogue Soul

The Catacombs uses a high-performance DSP engine to bring each effect to life with authentic character and gives you eight front panel preset locations where you can save and instantly recall your favourite settings. If you're looking to expand even further, you can access up to 128 presets with full MIDI control, it has configurable mono and stereo routing, a parallel or series switch, and an assignable expression pedal input to control any parameter (or multiple parameters).

Notes: Analogue tones are on the menu with this beautifully designed bucket brigade chorus/vibrato. Warm, organic sound with lots of modulation options and expression pedal input.

Supplier's Notes:
The Tempest features a full analogue pitch shifting circuit designed around a BBD chip

Offers digital control and 4 different RAMP options over Rate, Depth or Blend.

Expression or Ramp are selectable via firmware, and the expression jack can be used for external tap/ramp & engage control.

Lag Control
4 different wave shapes
Tone control
Blend 100% dry CCW, 100% wet CW and rich lush chorus at 50%
Rate, Depth and Blend ramping engine
Tap tempo w/subdivisions
Ramp up, Ramp down, bounce up&down, bounce down/up
EXP or CV input jack to control over ramp parameters
Soft switch with relay bypass, momentary & latching operation
Top mounted jacks

Notes: Dual channel analogue overdrive with real tube-like compression featuring 3 clipping options with carefully hand picked germanium diodes, smooth and sensitive to picking strength.

3 different gain levels from clear boost with a touch of dirt to high gain overdrive, full EQ with air control to manipulate the presence of your pickups, a MOSFET boost circuit lets you push your amp into natural breakup.

Order toggle switch to add volume or an extra gain stage.
Side A: BB style circuit with bass, air, treble, drive and volume control
Ge, Si and LED asymm clipping toggle
3 level gain toggle.
Side B: MOSFET boost +20dB with level control
A > B or B > A stack order toggle
Top mounted jacks

Notes: True bypass studio-grade compressor in small form factor offering full control of your overall tone. OTA based parallel compression with variable output current, input voltage controlling a carefully designed envelope circuit. Optimized for low noise operation.

Analogue compressor with OTA topology
Controls: Ratio, Threshold, Release, Attack, Brite (high cut), Level (compressed signal), Blend
Soft switch with relay bypass, momentary & latching operation
Top mounted jacks

Notes: Ozymandias - Dual overdrive pedal for guitar with exceptional distortion sounds

Ozymandias is a stacked dual-overdrive/distortion pedal that offers a plethora of usage options, choices fit for the King of Kings. From a near-clean boost with unparalleled headroom to full bore bourbon-swilling crunch, this one rules them all.

Features and Controls
Ozymandias contains two independent overdrive circuits, with identical controls but marked differences in tone and voicing:

The CROOK channel (left side, blue LED) boasts a full, fat thick sound and amp-like voicing. This channel is more articulate, grainy and has a huge low end.

The FLAIL channel (right side, red LED) is voiced in the midrange, with more drive and compression. This high-mid voicing will cut through a mix on pretty much any instrument.

Both channels have GAIN, TONE and VOLUME controls. For more textural control, each channel has three-way switches for hard (GRIND) and soft (GRIT) clipping, as well range (FULL/MID).

Each channel of the Ozymandias has its own set of input and output jacks. This allows you to split the output from each channel into separate amplifiers or even process two different instruments independently.

The mysterious square in the middle switches between two modes:

Series (Light off): FLAIL channel -> CROOK channel -> Output 2
Parallel (Light on): FLAIL channel -> Output 1; CROOK channel -> Output 2
Thanks to internal 22V operation, Ozymandias offers far greater headroom than most overdrive pedals from a regular 9V pedal power supply. Even with the gain dimed, this pedal is extremely reactive to playing dynamics and pick attack.

Notes: Suitable for guitar, synths, drum machines and more, the updated Godeater refines the boutique saturation/distortion pedal, offering more precise control over low frequencies. New filter-keyed sidechain, advanced routing and MIDI integration add major flexibility.

Supplier's Notes:
The new Godeater+ is the successor to the successful Godeater pedal from Indian manufacturer Animal Factory.

The Godeater was primarily designed for electric basses and saturates the sound in the lower frequencies. However, it is not limited to bass guitars. The pedal can also be used with synthesizers or guitars. The pedal can also be interesting in combination with drum computers. The main aim of the Godeater+ is to create a pedal that allows you to create a distorted sound without losing the low frequencies.

Notes: Room #40

Marshall Mojo in a Box

Heavily inspired by the tone and feel of the following legendary Marshall amps: the non master volume series PLEXI Super Lead (1959/1987) & Super Bass (1992) and the master volume series JMP & JCM800 (2203/2204).

Over the years, Tsakalis have had many different types of Marshall amps on their workbench, some for repairs and others for customisation. Being huge fans of the sound of these classic amplifiers, Tsakalis decided to try and capture its mojo - the true essence of the soul of this sound - and carefully place it in a little box. Thus the Room #40 was born!

Using JFET technology, Tsakalis tried to stay loyal to the tone and feel of the following legendary Marshall amps: the non master volume series PLEXI Super Lead (1959/1987) & Super Bass (1992) and the master volume series JMP & JCM800 (2203/2204).

Tsakalis emphasized on emulating the compression and sag coming from the power amp section, when these amps are pushed to the edge, while at the same time giving access to two famous mods, mod #39 (PLEXI) and mod #34 (JMP & JCM800).

Finally, the Presence control was incorporated to make the sound adjustable to any circumstance, regardless of whether you are plugged into the front of an amp that may or may not have a bright cap or even straight to a power amp.

Product Height (cm): 5.600
Product Width (cm): 7.300
Product Depth (cm): 12.300
Product Weight (kg) 0.314

Box Height (cm): 6.500
Box Width (cm): 0.300
Box Depth (cm): 14.800
Boxed Weight (kg): 0.385

Notes: Phonkify X

Envelope Filter and Octave

Maximise your funk with the Tsakalis Audioworks Phonkify X pedal. A potent pairing of fabulous filters and outstanding octaves. Expanding on the esteemed original Phonkify, the Phonkify X turns up the funk-o-meter with three selectable flavours of envelope filter and three types of octave voicings. This makes the pedal not only perfect for juicing up your jams and dripping your tone in cosmic gravy, but also delivers filters and octave tones that go way beyond and into the spaces between. Featuring flexible momentary or latching operation for each effect, plus a dedicated toggle switch for selecting the order of the filter and octave, the Phonkify X is ready to pour on the funk gravy and turn up the stank factor!

Phonkify X's Filter section warps and wiggles your tone into a kaleidoscope of grooves.

Flip the dedicated toggle switch to find your filter flavour: Low Pass for warm, buttery tones, Band Pass for that snappy, in-your-face attitude or a cosmic combo of Low Pass-to-High Pass for sweeping, interstellar effects. Got an expression pedal? Slide it in and ride the funk wave with hands-free control over your freaky frequencies.

While the Octave section can make the floor rumble and shake! No matter if you're feeling that high-flying octave-up, a deep-diving octave-down or a spaced-out blend of both, hit that footswitch and squeeze out every last funky drop.

Need more juice? Crank the master volume to fine-tune your output, while the pedal's internal voltage doubling gives your tone headroom for days. True Bypass keeps your original signal pure when you step off the funk train.

The Phonkify X isn't just a pedal. It's a total vibe machine, a groove generator and a tone tailor for the funky-hearted. Whether you're laying down tight pocket grooves or blasting off into experimental soundscapes, the Phonkify X has the tools to elevate your sounds right into the stratosphere.

Notes: ***B-STOCK: Box opened, product in perfect working order***


Valve-based pre-amps meet cabinet simulation in this ultra-flexible pedal. Dial in your tone, patch in effects, and control the lot via MIDI or USB. A brilliant combination of analogue and digital.

Supplier's Notes:
Tsakalis is proud to release their most ambitious product to date. Seamlessly blending the authentic analogue warmth of real tubes with a highly configurable cabinet simulator, plus flexible outputs and control options, the MOTHERSHIP - Real Tube Preamp stands out as possibly the most highly featured and flexible front end for any guitar rig currently available.

The MOTHERSHIP is a complete solution for authentic vintage and modern genuine tube amp tones, in a user-friendly and lightweight, yet rugged package that is designed to slot in easily into any setup.

Both channels on the MOTHERSHIP are identical, yet highly configurable.

Featuring three gain modes (High, Medium and Low) on each channel, along with a toggle switch for selecting between your three chosen speaker simulations, the MOTHERSHIP can conjure up a multitude of both iconic, familiar and unique tones easily and intuitively. Each channel also features two master gain controls along with two master volumes, allowing four different voices to be instantly recalled, either by pressing the relevant footswitch or via MIDI command.

Demonstrating its prowess as a fully comprehensive plug and play device, the MOTHERSHIP also features over 70 free custom cabinet simulations to choose from (when connected to Tsakalis' own TAW Editor app via USB), separate dedicated simultaneous outputs for both the cabinet simulator and a "dry" output for your amp of choice, MIDI control of channel, A/B selection and bypass and also a serial mono FX loop for added tonal versatility.

Fully-featured all-analogue real tube preamp design

The MOTHERSHIP represents the perfect "amp-in-a-box" pedal, seamlessly blending a beautifully designed, real tube front end with a highly flexible cabinet modelling solution. However, it also shines as a genuine tube overdrive pedal when connected to the front of your amplifier, or when running it as the tone defining preamp section of your setup, directly into your power amp. It can also do both of these things simultaneously.

Quad channel tube preamp and drive

This preamp pedal has two completely independent channels, each featuring a four-band EQ, two different Gain/Volume sections, three selectable gain-stages and three selectable cabinet simulations, plus a serial mono effects-loop for your external effects, MIDI in and free access to Tsakalis Audioworks' full free online library of carefully selected and curated digital cabinet simulations.

The MOTHERSHIP's two independent channels were carefully designed with a real tube audio path, providing a huge range of tones from warm or sparkling cleans all the way to high gain tube driven distortion. The two ECC83 (12AX7) tubes, run at a comfortable 240 Volts, providing touch sensitivity, headroom and plenty of gain and tube sag as required.

Each channel features a four band EQ (Bass, Mid, Treble and Presence) and two different Gain and Volume controls (Gain A-Volume A / Gain B-Volume B) transforming the MOTHERSHIP into a quad channel powerhouse.

The dedicated MODE switch for each channel is responsible for the tube audio path structure, giving 3 different gain modes L = Low, M = Mid and H = High, allowing you to easily customize completely different lead and rhythm tones with different gain structures as well as a solo volume boost for each and access them on-the-fly by simply pressing the relevant footswitch.

Notes: Mar Karit is a tube pedal preamplifier.

It contains 2 tubes, one NOS EF86 for the preamp section and one 6J1P (6ak5) for the buffer output. It is an all tube Preamp.

It runs on a 9V power supply (center positive) - and operate internally at 35volts. Furthermore, it produces a warm, rich, and full-bodied sound, and can capture both the softest and loudest sounds with great accuracy and clarity.

Pushed a little too far, it can produce pleasing harmonic distortions and warm saturations. The two volume knobs control the level of each stage.

All tube preamp
EF86 and 6J1P
High end components (Nichicon, Panasonic caps, Alpha pots and Switch, Rean Jacks...)
Made in France
True Bypass
9V DC / input power supply positive tip

Notes: Designed for some serious stank, The Supa Funk is an old-school, dual-band envelope filter, but with some totally modern twists! Featuring a responsive and articulate attack generator plus an expanded control set, it also features the new Color knob that blends in a second low-pass filter to help you to go from a classic bom-chicka-wow-wow funk, all the way to rich, throaty and vocal filter sweeps. So, plug in and mash that stomp switch if you're ready to get down and boogie... you supply the groove and this little box will bring the funk!

Solid Gold FX have already cut their tone teeth on former filter devices, the Funkzilla and Funk-lite. Supa Funk is the distillation of everything Solid Gold FX have learned from previous filter fests, helping to bring you a pedal that perfectly captures the groovy tones of the past, while filtering out all of yesteryears shortcomings. Hence you get superb dynamic and smooth filter tones, that perfectly follow and embellish every single nuance of your playing. While the blendable second low-pass filter enables you to create filter tones so rich that they will make Jeff Bezos weep.

Housed in a compact and intuitive package, the pedal's 5 knobs and a single toggle lets you determine if you're slinging out subtle low-pass sweeps or shooting sonic lasers. Depth adjusts the width or peak of the envelope effect, letting you go from shallow waves to super sweeps in seconds flat. Freq sets the centre frequency of the filter, where counter-clockwise lets you hone in on those beefy and dubby tones, while clockwise will give you brighter tones that really cut.

Attack adjusts both decay time and sensitivity. Going clockwise allows the envelope to trigger with ease and keeps it open for longer, while counter-clockwise lets you tame the trigger sensitivity and keep the filter decay shorter and snappier. Turning Attack fully counter-clockwise turns off the envelope, to allow you to dial in fixed filter tones with the Frequency knob - great for creating filtered lo-fi tones or classic cocked-wah sounds.

Color blends in the second low-pass filter. Going counter-clockwise will give you brighter and sharper filter tones, while turning that bad boy clockwise will bring out all the chewy growl and girth you could ever want. Finally, the Level pot lets you determine how loud you want the funk, while the Direction toggle lets you get classic forward sweeping filter tones to the left, and shooting futuristic filter rockets to the right.

To complete its all analogue funk-a-riffic tonal pallet, the Supa Funk is housed in a beautiful 70's retro themed enclosure with top mounted jacks and soft touch true-bypass switching and is built entirely by a passionate team of gearheads in SolidGoldFX's Montreal shop.

Notes: SolidGoldFX EM-III- Compact Delay Powerhouse

Welcome to the new SolidGoldFX EM-III Multi-Head Octave Echo; the smallest, most powerful and by far the most versatile SolidGoldFX delay pedal to date.

Building on SGFX's Electroman Delay legacy, the EM-III manages to both echo the past, present and future. With EM-III's wide-ranging yet ultra-intuitive control set, warm analogue-voiced echoes, precise and modern delay, as well as experimental and futuristic sound designs, are all just a single stomp away.

At your feet (or fingers) you have a multi-head tape style echo, with the ability to add in a signal an octave lower to the primary delay head. This can result in dancing, rhythmic delays with body and gravitas, as well as bold washy soundscapes. These two core features are controlled via a single mini-toggle. Flick it left to select between 1, 2 or 3 delay heads or flick it right to toggle the octave effect on and off. From there, just set your Delay Level, Repeats and Time via the knobs or tap in your preferred tempo via the soft-click tap tempo switch and let the good echo times roll.

The EM-III also sports delay modulation introduced via the Flutter control. Keep it at centre position for no modulation. Dial it left for a slow and dreamy chorus-like modulation or right for a faster vibrato, letting you create lush oceanic movement, tape-style crinkles, eerie tension and beautiful dissonance.

The colour knob allows you to engage both high-pass and low-pass filtering. Dead-centre you have a pristine full-frequency digital delay.

Dial it to the left and you cut the highs, creating warm, murky analogue-esque repeats. Dial it to the right and you suck out the lows for crisp and bright tape-style repeats or super thin lo-fi delays.

EM-III also brings interactive warp and glitch features to the tonal table by pressing and holding either Tap, Bypass or both at the same time. Hold Tap to increase the repeats until self-oscillation, creating a swelling wall of sound. Hold Bypass to replicate the sound of a tape motor on the fritz and a tape reel snapping, or hold both for glorious noise seances that will act as the perfect song/set closer.

Additional features include soft-touch, relay based, true bypass switching with the option of buffered trails, top jacks and up to a full second of delay time.

Designed to inspire and evoke emotion, EM-III can sound as pretty and cheerful or as dark and macabre as you wish.

Tune up, plug in and immerse yourself in the EM-III experience.

Notes: The BETA-V from SolidGoldFX is a Bass Preamp pedal that kicks! This latest incarnation of SGFX's top selling Beta Series is designed to capture the warmth and grit of favorite vintage tube amps. You know, that distinctive drive and tone that seems to be lacking from much of today's modern bass amplification.

Yes, we all know the convenience of a lightweight "sub 10 lbs" bass head that pumps out 500 watts and a neo cab that doesn't require a roadie crew or chiropractor is great, but there is something extremely satisfying in the way that big, old Ampeg-style tube setups compress, clip and round out your signal. However, with the BETA-V you can finally have the best of both worlds - bone-shaking mojo-packed dirt, all wrapped up in modern and easy to use convenience.

Solid Gold FX's classic Beta bass architecture has been reworked and expanded, delivering a wider range of tones. The low-pass filter now has 2 settings for bumped or scooped-mids as well as a centre bypass setting for a more transparent experience. Plus, the Drive control has been reworked for lower gain applications or hotter basses.

Most importantly, the BETA-V sports an active 2-band post gain EQ allowing you to boost or cut your highs and lows with a flat response in the centre. Dialling in anything from punchy overdriven Lemmy tones to the fattest, deepest soul shaking dub is only a few knob twists away. Complete with top-mounted jacks, soft touch true bypass switching and 9-18 V DC operations, the BETA-V is a true thump machine, ready to rock your world.

Notes: Bad Comrade Pedal

(Glitch, Pitch, Slice, and Dice)

Is it a distortion pedal? Is it a ring modulator? Delay? Just call it the Bad Comrade, the world's first hand-wired glitch, pitch, slice, and dice pedal. For the adventurous guitarist (or anyone wielding a 1/4" jack) that craves unthinkable tones, the Bad Comrade lets you distort, modulate, glitch, and slice on the fly.

The Bad Comrade is hand-wired in Seattle, Washington. True bypass, chrome plated LED, lead-free solder. It operates on a standard Boss style 9vdc power supply, not included. Includes a limited lifetime warranty, if registered within 30 days of purchase.

Important: power up the Bad Comrade with Glitch and Time wide open.

Enclosure size: 4.67" x 3.654" x 1.547"

Notes: The ODR-mini delivers creamy, natural overdrive - Everything from pushed clean amp tones to gain filled stacks! It has the same tones as its legendary brother - the ODR-1. You'll love the warm mid-gain tones for rock and blues, and the screaming hard rock sounds from the ODR-1 Mini. Plus the mini features true-bypass switching, the SPECTRUM pot with mid-click, fluorescent pointers on the "GitD" - knobs (Glow-in-the-Dark). Guaranteed to be a BIG part of your sound while a small part of your pedal board.

Electr. stab. power supply 9-18 Volt DC, with min. 100 mA, 2.1 mm plug, center negative, (optional)

Effect-Type: Overdrive
Analogue
Mono/Stereo: Mono In, Mono Out
Control: Drive, Tone, Level
Bypass Modus: True Bypass
9-18 Volt, center negative
Consumption 25 mA
Dimensions (BxLxH / mm): 42 x 93 x 50
Weight: 175 gr
Country of origin: China
Solid metal housing
Low current consumption
inkl. tape

Notes: CHO-mini

Compact Stereo Chorus Pedal

The pocket-sized, yet feature packed, the Nobels CHO-mini pedal combines an outstanding selection of chorus tones, all in a budget-friendly and space-saving enclosure. With a heritage of building chorus units in the past, Nobels has engineered this all new pedal to offer maximum versatility, in a super compact package.

Providing a skilfully curated selection of ageless chorus effects, CHO-mini delivers a wealth of sonic possibilities, with either a mono or spacious stereo image. The achievable tones are far beyond the
pedal's modest footprint and is an excellent addition to any type of setup.

The CHO-mini features three carefully crafted, yet distinct chorus flavours. All three modes faithfully capture those iconic modulation tones that have shaped music across genres, past and present and are simply selected by the pedal's convenient mode switch, right on the face of the pedal.

"Chorus 1"

This emulates the coveted and well-established bucket-brigade style of chorus pedal tones from the 70s. You know "THAT" Chorus sound that is instantly recognisable from many popular recordings.

"Chorus 2"

Based on a different flavour of stereo chorus, "Chorus 2" allows for a higher rate towards the end of the control range, enabling pleasing vibrato like textures.

"Flanging"

While not a flanger tone in a traditional sense, this mode emulates another extremely popular (and rare and expensive in its original form) chorus pedal from the 70s, in its subtle flanging mode. Think of this as a comb-filter phasing of the signal (like feedback on a delay), focusing on its luscious general character and without becoming too extreme.

Adding to its flexibility, the CHO-mini features full tap tempo functionality, but in a single switch design. Simply holding the footswitch for approximately two seconds enters the pedal into "Tap Tempo Mode", following which the pedal will respond to rhythmic tapping instantly. Further defying expectations based on its compact appearance, there are dedicated toggles for selection between mono and stereo (TRS) operation as well as true or buffered bypass modes, making the pedal suitable for almost any musical situation, anywhere, any time.

As with all other current Nobels pedals, the CHO-mini features 4 integrated Mounty-P Mounting Plates for safe and secure attachment to pedalboards. With its full metal enclosure and Glow in the Dark pointer knobs, the CHO-mini is a pint-sized powerhouse that's built for performance!

Product Height (cm): 5.100
Product Width (cm): 4.850
Product Depth (cm): 9.370
Product Weight (kg): 0.210

Box Height (cm): 6.540
Box Width (cm): 7.000
Box Depth (cm): 12.100
Boxed Weight (kg): 0.301

Notes: For over 30 years, the Nobels ODR-1 overdrive pedal has become a renowned classic and has developed cult-like status among guitarists worldwide. Seen as an indispensable staple in many professional setups, the pedal has become an industry standard that is widely imitated, but seldom surpassed.

The new Nobels ODR-1X is the next generation of this now legendary overdrive, heralding a new chapter in the Nobels overdrive legacy. Due to popular demand, a convenient external bass cut pot has been added, as well as the option to change between true bypass or buffered bypass. For hi-gain aficionados, a new switchable hi-gain boost is also now available. This is capable of transforming ODR-1X into a true hard rock monster. With the ability to control both the gain boost and bypass remotely, along with the unique SPECTRUM tone control, fold-out Mounty-P mounting plates and knobs with fluorescent 'Glow in the Dark' pointers, the ODR-1X adds worthwhile flexibility and utility to a time-tested favourite.

For extended ease of use, the internal Bass Cut feature originally included in the ODR-1BC is now available as an external variable control right on the face of the pedal. This allows for complete optimisation of the pedal's bass response on the fly, at the simple turn of a knob. The flexibility of this new additional control compliments Nobels' unique and renowned SPECTRUM tone control, which alters the proportion of both the low-mid and high frequencies simultaneously. At midday, the frequencies remain almost untouched. However, moving from the minimum to maximum positions will deliver variations in frequency response that are suitable for a wealth of musical tastes and styles.

ODR-1X also now features the ability to switch between True Bypass and Buffered Bypass via a mini switch that is located within the top loading battery compartment. True Bypass gives the maximum tonal purity. While players who are using longer cable runs, can switch to Buffered Bypass mode to preserve high frequencies. No matter what Bypass mode you choose, you also have the functionality of being able to switch the pedal on and off and control the new Gain Boost feature remotely via the pedal's TRS connection.

The pedal operates at standard 9 V DC, however if run at 18 V, this allows ODR-1X to deliver increased dynamic headroom. As with all Nobels pedals, the ODR-1X features integrated Mounty-P Mounting Plates for safe and secure attachment to pedalboards.

Notes: For over 30 years, the Nobels ODR-1 overdrive pedal has become a renowned classic and has developed cult-like status among guitarists worldwide. Seen as an indispensable staple in many professional setups, the pedal has become an industry standard that is widely imitated, but seldom surpassed.

The new Nobels ODR-mini2 is the next stage in the evolution of the legendary ODR-1's little brother, the ODR-mini. Due to popular demand, this diminutive powerhouse now features a very useful bass cut feature as an external control. Added to this, the upgraded full metal housing, along with the integrated Mounty-P Mounting Plates, completes the worthwhile upgrades for this compact dynamo.

For extended ease of use, the internal Bass Cut feature originally included in the ODR-1BC is now available as an external variable control right on the face of the pedal. This allows for complete optimisation of the pedal's bass response on the fly, at the simple turn of a knob. The flexibility of this new additional control compliments Nobels' unique and renowned SPECTRUM tone control, which alters the proportion of both the low-mid and high frequencies simultaneously. At midday, the frequencies remain almost untouched. However, moving from the minimum to maximum positions will deliver variations in frequency response that are suitable for a wealth of musical tastes and styles.

With its newly designed and upgraded full metal enclosure, the ODR-mini2 is capable of operating at either standard 9V or 18V for increased dynamic headroom. Along with all other Nobels pedals, the ODR-mini2 now also features 4 integrated Mounty-P Mounting Plates for safe and secure attachment to pedalboards.Upgrade your overdrive experience and become a part of the new ODR generation!

Notes: DEL-mini

Compact Stereo Delay Pedal

The diminutive, yet feature packed, Nobels DEL-mini delay pedal combines an outstanding selection of delay tones in a budget-friendly and space-saving enclosure.

While Nobels has a heritage of past delay units, this newly engineered pedal offers maximum versatility in a super compact package.

Providing an expertly curated selection of timeless delay effects with either a mono or spacious stereo image, DEL-mini delivers a wealth of sonic possibilities, far beyond its modest size and is an excellent addition to any size of setup.

Featuring three carefully crafted delay flavours, Tape (up to 553 ms), Analog (up to 402 ms) and Digital (up to 1000 ms), all three modes all faithfully capture the iconic delay tones that have shaped music across genres, past and present. Each mode is simply selected by the pedal's convenient mode switch right on the face of the pedal.

Adding to its flexibility, the DEL-mini features full tap tempo functionality, but in a single switch design. Simply holding the footswitch for approximately two seconds enters the pedal into "Tap Tempo Mode", following which the pedal will respond to rhythmic tapping instantly. Further defying expectations based on its compact appearance, there are dedicated toggles for selection between mono and stereo (TRS) operation as well as true or buffered bypass modes, making the pedal suitable for almost any musical situation, anywhere, any time.

As with all other current Nobels pedals, the DEL-mini features 4 integrated Mounty-P Mounting Plates for safe and secure attachment to pedalboards. With its full metal enclosure and Glow in the Dark pointer knobs, the DEL-mini is a pint-sized powerhouse that's built for performance!

Product Height (cm): 5.100
Product Width (cm): 4.850
Product Depth (cm): 9.370
Product Weight (kg): 0.210

Box Height (cm): 6.540
Box Width (cm): 7.000
Box Depth (cm): 12.100
Boxed Weight (kg): 0.301

Notes: The Chthonic Fuzz (pronounced: Thawnic) creates fat, corpulent, fudgy, sludgy, fuzz tones that pair perfectly with single-coil, P90, gold-foil, and De-Armond style pickups. It also works great with PAF-style humbuckers, but this fuzz was designed with brighter guitars and amps in mind.

Starting with a beloved a single-knob '70's fuzz circuit, DOD experimented with adding a subtle tone control (Lustre), and then a separate gain control (Fuzz). This yielded a simple yet powerful fuzz with an earthy, dark flavour. Straight-up transistor clipping using a pair of 2N2222 transistors allows guitar volume knob clean-up like other classic fuzzes, but the Chthonic comes from a different dimension. Think of it as a kind of Colorsound Overdriver from an alternate universe.

The Chthonic's Kraken/Cthulhu graphics are courtesy of the same artist that did the Carcosa Fuzz art. The Chthonic is a psychotic dizygotic dark companion to the Carcosa Fuzz.

Darker fuzz designed for brighter guitars and amps
Subtle tone control retains pick attack throughout entire range
Excellent clean-up with guitar volume knob
Lightweight all aluminium chassis
Crisp blue LED
True Bypass
11.88 cm (L) x 6.68 cm (W) x 5.71 cm (H)
0.453 kg.
Power Supply 9V Alkaline Dry Battery orPS200R Power Supply
Manufacturer Warranty: 1 Year

Notes: 50th Anniversary Limited Edition

Hand-built in the USA - only 1,974 units will be made!

3 Overdrives in One

Switch between vintage-authentic SILICON clipping, Ge/ASYM Germanium asymmetrical clipping, or LIFT for no diode clipping for either clean boost use or op-amp rail clipping at higher levels.

Mod-Friendly Components

Equipped with a socketed LM741 op-amp and through-hole components for easier modding just as the original 250 were known for.

For Players and Collectors Alike

Whether you're hitting the stage or simply celebrating a history-making overdrive pedal, you won't be disappointed.

The Overdrive Preamp 250 - 50th Anniversary Edition pedal celebrates the introduction of the original 250 pedal in 1974. Widely considered to be one of the most influential overdrive pedals, the original 250 helped shape the sound of rock and metal in the late '70s and early '80s. The Overdrive Preamp 250 - 50th Anniversary Edition pedal is hand-built in the USA using the authentic design of the original pedal, while adding two extra modes for modern sonic versatility.

The Overdrive Preamp 250 - 50th Anniversary Edition is actually three overdrive pedals in one. Set it to Silicon mode for a faithful reproduction of the original 250's bite and grind, courtesy of an authentic LM741 op-amp. Select Ge/ASYM mode to engage a Germanium diode for asymmetrical even-order clipping that provides a distinct tonal character with incredible touch response. Or switch to Lift mode to remove diode clipping completely from the signal path, for use as a clean boost and preamp.

Complete with a commemorative 50th Anniversary badge, custom artwork and colour-matched LED, and a 50th Anniversary pedal topper, the Overdrive Preamp 250 - 50th Anniversary Edition pedal is ideal for players and collectors alike.

What's in the box

1 x DOD Overdrive Preamp 250 - 50th Anniversary Edition
1 x 50th Anniversary Pedal Topper w/Hex Wrench
1 x Serialized Certificate of Authenticity
4 x Stickers
4 x Guitar Picks
Full-colour owner's Manual


General Specifications

Dimensions: 4.68" (11.88cm) x 2.63" (6.68cm) x 2.25" (5.71cm) / (L x W x H) - (Jack W = 2.92" (7.41cm))
Weight: 0.60 lbs. (272g)
Input: 1/4" Instrument Phone Jack
Input Impedance: >300kO typical
Output: 1/4" Instrument Phone Jack
Output Impedance: 9.1kO - 27.5kO (based on Level control position)
Gain: +9.5 dB to +46.7 dB
Power Input: 2.1mm DC Barrel Jack, centre (tip) negative
Chassis: Aluminium
Power Supply: 9V Alkaline Battery, DigiTech PS0913DC Power Supply, Other well-regulated 9V centre (tip) negative supply +18V tolerant
Consumption: 7mA typical
Warranty:1 year

External dimensions

Dimensions: 6.94" (17.62cm) x 3.38" (8.58cm) x 2.88" (7.31cm) (L x W x H)
Weight: 0.87 lbs. (367g)

Notes: Updated version of Source Audio's excellent Nemesis delay features an all-analogue dry signal path, meaning your original signal passes through unadulterated. Same versatile delay options, including patches based on vintage and modern hardware.

Supplier's Notes:
The NEMESIS Delay ADT is an updated version of Source Audio's award-winning NEMESIS Delay. It has all the tones and features that made the original NEMESIS so popular and includes some key updates including an analogue dry through signal path.

Analogue dry through means that the guitar's dry signal maintains a 100% pure and unprocessed analogue signal adding only the delay you choose. Other new features include enhanced MIDI functionality, 100 factory loaded presets, and an updated collection of delay effects easily accessible with the pedal's intuitive interface. The updated NEMESIS is also compatible with over 1,000 Neuro user presets created for the original NEMESIS Delay.

Additional NEMESIS Delay ADT features include stereo ins & outs, full MIDI functionality with 5-pin MIDI DIN and through ports, tap tempo with 15 different beat divisions, 8 onboard presets (128 with MIDI), bypass trails, external expression control, and a delay "freeze" function engaged by holding down the tap tempo footswitch.

NEMESIS Delay ADT captures the full spectrum of delay effects, starting with a comprehensive collection of meticulously crafted vintage delay tones. The Source Audio engineering team spent over a year studying numerous iconic and sought-after tape and bucket brigade delay units with a staunch dedication to identifying their every nuance and idiosyncrasy. At the opposite side of the spectrum, you'll find an advanced collection of sophisticated and specialized delay effects.

In addition to the basic 12 delay engines available on the front panel, the NEMESIS Delay ADT also features 12 extended delay engines for a total of 24 engines in all. These additional "back 12" effect engines offer a variety of tonal options and can be selected using the Neuro App or via MIDI. Any of these effects can be used to overwrite the default effect engines on the effect dial or can be stored as user presets.

Job one in the development of the NEMESIS Delay ADTwas to create a flexible, easy-to-use, and great sounding delay pedal. Out of the box, that's exactly what it is - plug in, select from the twelve onboard delay engines and make beautiful music... simple. But there is much more here than meets the eye - the truly "Big Idea" behind our One Series pedals was to give musicians a second, far deeper, set of options and editing tools with which to craft the perfect tone. The Neuro Desktop Editor and Neuro Mobile App are free downloads for iOS, Android, Mac, and Windows.

Additional parameters found in Neuro include Diffusion, Distortion, Wow and Flutter, Advanced Filtering, Sample Rate Reduction,12 different Tap Tempo Beat Divisions, Polyphonic Pitch Shifting and much more. Neuro's complete collection of delay effects includes "Sweeper" (a modulated filter delay), "Degrade" (with sample rate reduction), "Sequenced Filters," "Warped Record", "Chorus," and more.

Customized presets can be published to the cloud and made accessible to the entire Neuro Community. To date there are well over 8K published presets available for One Series pedals in Neuro. After editing your preset, burn it directly to the pedal and access it easily without reconnecting the Neuro App.

Notes: The ARTIFAKT Lo-fi Elements is the first pedal of its kind - a comprehensive collection of all the hazy, scratchy, wobbly, and broken tones that epitomize the term 'lo-fi'.

Like a mega-delay or mega-reverb, Artifakt is a "one-stop shop" for all the most sought-after lo-fi effects including old vinyl replications, tape modulation and saturation, bit crushing, sample rate reduction, dark reverb and echo, filtering, compression, glitch, and more.

Source Audio has dedicated much of the past three years to meticulously honing each of these sounds as well as engineering an entirely new hardware design with an easyto-use interface that places the pedal's full capabilities at your fingertips.

Navigating through the seven positions of Artifakt's effect selector knob unleashes a symphony of sonic transformations, each akin to engaging a new pedal with its own unique brand of lo-fi.

The first effect on the dial is Radio, tune into its crackling nostalgic tones where static frequency filtering and noise generation evoke the charm of a vintage radio struggling to dial in a signal.

The Tape engine conjures the sound of vintage tape machines by blending subtle compression, overdrive, tape flutter, and pitch modulation to invoke effects like slapback, chorus, doubling, and tape saturation.

uVerb is a primitive reverb effect with bouncing echoes similar to the reverb on 8-bit gaming systems.

The Crush effect voyages the realm of bit-depth quantizing and sample rate reduction, all finely sculpted with the resonance of a MoogTM-style ladder filter.

Ladder, inspired by the revered R-2R ladder filter, offers both envelope and LFO modulation control for classic and dramatic filter sweep effects.

Vinyl faithfully emulates the crackle and pop of vintage records, from pristine 180-gram vinyl to well-loved gramophone platters.

Glitch adds an unpredictable edge, capturing fragments of your performance and hurling them back at random speeds and pitches.

Pairing the Artifakt Lo-fi Elements with Source Audio's completely reimagined and reengineered Neuro 3.0 software elevates an already great pedal to new heights. Access free, stage-ready presets from Neuro's expanding library of factory and Neuro Community presets.

Explore Neuro's extensive editing capabilities to blend and experiment with the various lo-fi elements mentioned earlier-it's a limitless effects palette for crafting unique lo-fi sounds. Artifakt also boasts stereo inputs and outputs, full MIDI control via the 3.5mm TRS in and thru jacks, dual footswitches, 128 presets, and more.

Notes: Pigtronix Infinity 2 is a stereo looping pedal with two independent loops and a streamlined user interface that has been designed to provide an intuitive musical workflow, right out of the box.

The Infinity 2 enables musicians to seamlessly switch between parts, even during initial recording or while overdubbing. This Verse / Chorus type of workflow is further expanded by the ability to delete the loop that is not currently playing - freeing up an open slot for a new loop to be created, without interrupting playback.

Nearly all actions taken by the Infinity 2 occur at the loop boundary. This allows the musician to cue an overdub, switch between loops or stop precisely at the end of a loop, without having to worry about hitting the footswitch at precisely the correct time. Simply tell the machine what to do and it will occur at the end of the current loop. This is the general rule of thumb for all commands, with a few exceptions such as instant stop and fade out, which take place immediately when activated.

A small push-button switch, located above the left footswitch, allows the user to change the functionality of this footswitch to perform various Stop, Stutter and Octave Shift effects. A TRS remote jack allows these special features to be triggered by an external switch. Undo / Redo functionality can also be assigned to the left footswitch, allowing the musician to remove previous overdubs and add them back as desired.

In addition to a dedicated knob for loop Volume, the Infinity 2 also features a Decay knob that causes loop audio to fade out progressively during overdub. With the Decay knob set fully clockwise, the layers pile up at full volume. With the Decay knob set fully counter-clockwise, each overdub lasts for only one loop cycle. With the Decay knob set anywhere in-between those extremes, overdubbing on the Infinity 2 creates constantly evolving loop textures that can be instantly snapped back to a previous state using the Undo function.

The Infinity 2's full-range, high-headroom audio inputs will accept mono or stereo instruments as well as line-level signals. The dual outputs of the Infinity 2 can be routed for stereo output with pass-through and loop audio mixed together, or they can be configured for discrete Wet / Dry operationiwhere the loop audio is summed to one output, and pass-through audio is sent to the other.

Infinity 2 combines the high-fidelity audio and ultra-low-latency looping engine of the original award-winning Pigtronix Infinity Looper, with a much smaller form factor and a user interface specifically designed to make looping fun and musical for everyone.

Notes: Infinity 3 is the world's most musical looping pedal. Simple to operate, yet tremendously powerful and flexible, the Infinity 3 guarantees latency-free looping. This state-of-the-art platform provides instantaneous record, playback, dub, undo and redo, on two stereo loop pairs that can be played in series or parallel as well as synchronized and cue'd for automatic playback. On top of superior speed and a unique, performance-friendly feature set, Infinity 3 sounds downright incredible thanks to its discrete analogue limiter stages, transparent analogue pass-through and 24 bit HD recording engine with variable sample rate that can be incremented in semi-tones over two octaves. With approximately 3 hours of recording time on up to 50 loop pairs, the Infinity 3 was designed to inspire compositional depth and engaging performances. Comprehensive MIDI control and intelligent MIDI clock jitter correction provide the ability to link the Infinity 3 to a DAW, Drum Machine or other effects pedals. Infinity 3 is the ultimate tool for writing, rehearsing and performing every style of music.

Button-by-button

Red/Green - A key corresponding to centre buttons. When any button is red, the feature written above the button is active. When green, the feature below is active.
Sync/Multi - Sync options for Loop 1 and 2. Red for a synced 1:1 ratio, Green for Multi (press and hold to set how many times longer Loop 2 is than Loop 1).
Parallel/Series - Playback options for Loop 1 and 2. Red for Parallel playback, where Loops 1 and 2 can be played on top of each other. Green for Series, for verse/chorus-style looping. Push and hold to access expression pedal functions menu.
Stereo/Split - Input options. Red for standard looping, where all inputs record to each loop. Green for Split, where each input is assigned to its own Loop. Push and hold for Remote Switch pitch interval menu.
Arm/All - Command options. Red for Arm, where only the armed loop receives stop/play commands. Green for All, where both loops receive stop/play commands. Push and hold for loop aging menu.
Cue/Fade - Red for Cue, where actions occur at the loop boundary once triggered. Green for Fade, where Loop audio fades until end of current cycle once stopped. Push and hold to access menu to set number of cycles over which Loop audio fades. Off for instant stop.
24kHz/48kHz - Fidelity/sample rate options. Infinity 3 automatically records at 48kHz. Use this button to change the rate at which you record, or use it after recording a loop to change the speed, and therefore pitch, of your recorded audio. Standard options are 12, 24, and 48 kHz, resulting in octave jumps. Push and hold to access the LED menu to toggle through sample rates based on musical intervals.

Instantaneous commands and hi-fi sound
Utilizing state-of-the-art technology to achieve previously unheard audio fidelity out of a foot pedal looper, Infinity 3 was designed to offer the most musical experience possible. Commands are instantaneous- meaning what you put in is exactly what you get out. Jam-packed with features, Infinity 3 allows for every looping possibility, including MIDI-sync options, stereo split inputs, and extra features via the Pigtronix Universal Remote.

Set your course
An unassuming-looking but infinitely complex world of looping the likes of which we have never seen. It may be mind-bending at first, but it's definitely habitable once you give it a chance.

Specifications

Electronics

Voltage: 18VDC
Current draw: 200mA
Input impedance: 1M
Output impedance: 150 ohms

Body

Length: 5"
Width: 7.4"
Height: 2.4"
Weight: 1.2lbs

Notes: The Bass War was born with a clear mission: to take Death By Audio's legendary Fuzz War and craft it into the ultimate weapon for bass. Death By Audio didn't just tweak the formula, they reimagined it from the ground up, infusing classic circuit designs with our own twist. The result? A harmonically rich octave fuzz that doesn't just deliver - it dominates, with exceptional gain, a wide tonal range and a MIX control that puts the power of mind-blowing bass fuzz at your fingertips.

This pedal isn't here to play nice, it's here to push boundaries. The super-extended control ranges let you sculpt your sound from a gritty, grinding drive all the way to a thick, bone-crushing distortion. The FUZZ knob is your key to unlocking everything from a subtle growl to an all-out sonic assault.

The TONE knob is your secret weapon, acting like a notch filter that lets you sweep through a massive arsenal of fuzz tones, each one rich, heavy, and impossible to ignore. And with the MIX control, you can blend just the right amount of fuzz with your clean bass, keeping your sound powerful and balanced, no matter how intense things get.

The Bass War isn't just another Fuzz pedal, no it's your ticket to a bass tone that demands attention and leaves its mark. If you're ready to take your sound to the next level and carve out your own sonic territory, the Bass War is your go-to pedal. Plug in and let your bass do the roaring.

Notes: The Germanium Filter is Death By Audio's love letter to sticking a pencil in your speaker.

Start with a console-style drive circuit, add in a dash of obsolete germanium transistors and finish it off with a super intense DBA-style filter - BLAMO! You've got a sound heavy enough to crush on and sharp enough to slice a tomato.

The Filter control is extremely unconventional - it'll take you from bottomless, sub-woofered out lows to super searing and brittle highs, with a universe of tone in between. The Germanium Filter will help you find the sweet spot for your instrument in any situation - at a show, in the studio, or even stranded on the side of the highway after your tour van catches fire - hey, it happens!

The Gain knob starts with a dirty boost that then spans through saturated drive, spitting distortion, and a blistering fuzz tone. Get ready for your sound to be cranked up to infinity-and-a-half and captured on tape by the most incredible recording engineer you've ever heard - only there's no engineer and no studio. Just you, your guitar, your amp and the Germanium Filter.

Controls

Filter: Controls the frequency response of the pedal, featuring huge low end, scooped mids, and sharp, piercing highs.

Gain: Sweeps from mild overdrive to blasted-out fuzz. Very interactive with your guitar's volume control.

Volume (internal): Controls the overall output level of the pedal.

Specifications

Dimensions: 5" x 2.5" x 2.25" (including hardware).

Weight: 10.6 oz

Power: 9V (runs on standard 2.1mm negative center 9V adapter or included 9V battery).

Current Draw: 5 mA.

Notes: Lo-fi looks, killer sound. Serious filth here from Death By Audio. Surprising versatility with simple controls, offering mild overdrive if you want but specialising in grimy fuzz.

Supplier's Notes:
Call in the Army, the Navy, Scotland Yard, your mom, and the Mario Brothers! You'll need all the help you can get to stop this endless wall of fuzz from raging! This kill-all circuit explodes the meanest, nastiest, most insane distortion to make you the ruler of the fuzz universe.

This Death By Audio pedal has hand spray-painted graphics covering up meaty components and sound, giving you a high-tech fuzz mutilator at a punk rock price. With three knobs it can create a multitude of ultimate fuzz, boost, overdrive, and distortion sounds. Listen for yourself and you will see, this is the thickest-sounding sustaining fuzz pedal we have ever heard.

Controls

Volume: Controls the overall output level.

Fuzz: Controls the gain of the fuzz circuit. At its lowest setting the pedal just acts as a tone shifter. As the fuzz knob is turned up it sweeps from a booster to an overdrive to a thick distortion to a full on blown out war of fuzz.

Tone: A specially designed multi-curve shaping filter which changes the timbre of the pedal from super deep bass sludge to screaming highs.

Specs

Dimensions: 5.87" x 4.72" x 2.5" (including hardware)
Weight: 18 oz.
Power: 9V (runs on standard 2.1mm negative center 9V adapter or included 9V battery)
Current Draw: 1 mA