Back catalogue: All genres

Notes: Djay (algoriddim) team up with the scratch power house that is the I.S.P ( D-Styles / Shortkut & Q-Bert) to give you The Fugitives of Funk 12" control vinyl. With original scratch samples on side A all produced by the Invisibl Skratch Piklz and the Djay control tone on side B.

Allows full control of djay on iOS devices via professional analog turntables using special time code vinyl

Two turntables and an iPhone - Bypasses the need for laptops, computers, or hard-drives in the DJ booth

DJs can now connect their iOS device directly to their mixing system, optimized user interface automatically adapts when DJ hardware is connected

Side A:

Track 1 Skipless Scratch 133 bpm
Track 2 Skipless Scratch 133 bpm
Track 3 Skipless Scratch 133 bpm
Track 4 Skipless Scratch 133 bpm
Track 5 Skipless Scratch 133 bpm
Track 6 Skipless Scratch 100 bpm
Track 7 Skipless Scratch 100 bpm
Track 8 Skipless Scratch 100 bpm
Track 9 Skipless Scratch 100 bpm
Track 10 Skipless Scratch 100 bpm
Track 11 Skipless Drums 133 bpm
Track 12 Skipless Drums 133 bpm
Track 13 Skipless Drums 133 bpm
Track 14 Skipless Drums 133 bpm
Track 15 Skipless Drums 133 bpm
Track 16 Locked Groove

Side B

Official Control Vinyl djay algoriddim Tone (10.00)

Notes: Djay (algoriddim) team up with the scratch power house that is the I.S.P ( D-Styles / Shortkut & Q-Bert) to give you The Fugitives of Funk 12" control vinyl. With original scratch samples on side A all produced by the Invisibl Skratch Piklz and the Djay control tone on side B.

Allows full control of djay on iOS devices via professional analog turntables using special time code vinyl

Two turntables and an iPhone - Bypasses the need for laptops, computers, or hard-drives in the DJ booth

DJs can now connect their iOS device directly to their mixing system, optimized user interface automatically adapts when DJ hardware is connected

Side A:

Track 1 Skipless Scratch 133 bpm
Track 2 Skipless Scratch 133 bpm
Track 3 Skipless Scratch 133 bpm
Track 4 Skipless Scratch 133 bpm
Track 5 Skipless Scratch 133 bpm
Track 6 Skipless Scratch 100 bpm
Track 7 Skipless Scratch 100 bpm
Track 8 Skipless Scratch 100 bpm
Track 9 Skipless Scratch 100 bpm
Track 10 Skipless Scratch 100 bpm
Track 11 Skipless Drums 133 bpm
Track 12 Skipless Drums 133 bpm
Track 13 Skipless Drums 133 bpm
Track 14 Skipless Drums 133 bpm
Track 15 Skipless Drums 133 bpm
Track 16 Locked Groove

Side B

Official Control Vinyl djay algoriddim Tone (10.00)

Notes: Great value from AlphaTheta's entry-level FLX controller. Designed for use with software including Rekordbox, Serato and Djay, the tiny FLX2 has everything the beginner DJ needs to get started mixing any type of music.

Supplier's Notes:
Compatible with multiple DJ applications and streaming services:

The DDJ-FLX2 works with various DJ applications including rekordbox, djay and Serato DJ Lite - popular choices among both beginners and professionals. After installing your preferred app on your mobile device, you can connect to the controller and start DJing right away. If you want to challenge yourself to learn more advanced techniques, you can use DJ software on your PC/Mac. Each DJ application is compatible with different streaming services, so you can choose one based on the music and DJ style you want to play. If you go for djay, you can access Apple Music, allowing you to choose from over 100 million tracks and incorporate your favourite music into your mixes.

Mix easily with Smart CFX and Smart Fader:

It's easy to replicate the seamless song mixing of professional DJs thanks to the Smart CFX* 3 and Smart Fader* 3 features on the DDJ-FLX2. Smart CFX enables you to recreate complex and dynamic effect techniques used by professionals with the simple turn of knob. You can use it for connecting tracks together and for making your performances more dynamic by adding emphasis to the music whenever you like. Smart Fader automatically optimizes control of the volume, BPM, and bass - which is all needed when transitioning between tracks - and all you have to do is slide the crossfader in one direction. With this feature, you can easily mix tracks from different genres, even if they have vastly different tempos (BPM). * 3 Function names and operations may vary depending on the DJ application used

Lightweight, compact body with user-friendly features:

The DDJ-FLX2 is AlphaTheta's lightest and most compact DJ controller, so you can take it anywhere you want to play. It runs on USB bus power, so there's no need for an external power supply when you connect it to a PC/Mac or a mobile device 4 via USB Type-C. You can start DJing easily by playing music through the built-in speakers of your PC/Mac/mobile device or, if you plug speakers into the audio output terminals of the DDJ-FLX2, you can throw a loud party with friends. And, if you want to level up your skills, you can use headphones to cue up tracks and challenge yourself to learn various DJ techniques

Performance Pads for professional-style DJing:

It's easy to manipulate your music with the Performance Pads on the DDJ-FLX2. Pad Mode Select allows you to switch between various modes, including Hot Cue mode, where you can mark any point in a track - such as the intro or chorus - like a bookmark which allows you to instantly jump to that point. With Pad FX, you can apply a variety of effects simply by pressing the pads, adding your own touch to the music. And, using the sampler, you can add sound effects or try performance techniques like finger drumming.

Notes: Four-channel DJ controller from AlphaTheta, drawing features and layout from club standard Pioneer DJ gear. Unique Groove Circuit function allows you to remix tracks on the fly, replacing drums and blending with real-time Stems.

Supplier's Notes:
Key features

Groove Circuit: freely manipulate drum parts and create new remixes

With the Groove Circuit function, you can easily create remixes by simply pressing the dedicated buttons. This enables you to replace the drum parts of a track - even while it's playing - with different drum loops, changing them into different genres and performing unique remixes effortlessly. And, by applying effects to the drum parts, you can easily create fills, build-ups, and breakdowns. By freely manipulating the drum parts, you can perform innovative and creative live remixes.

*The Groove Circuit function is only available on rekordbox for Mac/Windows.
*For rekordbox for iOS/Android, the function is linked to the sampler and others.
*For Serato DJ Pro, the function is linked to Stems FX (read on for more info).

Drum Swap

You can replace the drum parts of the track loaded on the deck, even when it's playing, with different drum loops at the push of a button. To help you enjoy this feature as soon as you unbox the DDJ-GRV6, you can download a free pack of 40 loops in a variety of genres.

Drum Roll / Trans

Easily create impromptu drum rolls, add fills to transitions, and build up tracks by applying the Roll or Trans effect to drum parts.

Drum Release

Apply Release FX to drum parts to easily create breakdowns.

Specifications
Maximum Dimensions (W × D × H): 711.4 × 375.9 × 75.7 mm / 28.0" × 14.8" × 3.0"
Main unit weight: 4.6 kg / 10.2 lbs.
Frequency response : 20 Hz - 20 kHz (USB)
S/N ratio: 104 dB (USB)
Total harmonic distortion: 0.003% (USB)
Power supply: DC 9 V, 3.0 A (USB power adapter), DC 5 V, 1.5 A (USB bus power)

Accessories:
USB cable (C to C)
Overlay sheet
Quick Start Guide
Precautions for Use
Warranty (for some regions)

Compatible software:
rekordbox for Mac/Windows
rekordbox for iOS/Android
Serato DJ Pro

Terminals
Inputs: MIC × 1 (1/4? TRS jack × 1)
Outputs: MASTER × 2 (1/4? TRS jack × 1, RCA × 1) , BOOTH × 1 (RCA × 1) , PHONES × 2 (1/4" stereo jack × 1, 3.5 mm stereo mini jack × 1)
USB: USB Type-C × 2

Performance Control

Channels: 4
Deck Control: 4 / Dual
Jog Wheel: 206 mm
Sampler: (rekordbox) 16 slot × 4 bank, (Serato DJ Pro) 8 slot × 4 bank
Hot Cues: 8
Pad Modes: (rekordbox) Hot Cue, Stems, Beat Jump, Sampler, Keyboard, Pad FX, Beat Loop, Key Shift
(Serato DJ Pro) Hot Cue, Stems, Beat Jump, Sampler, Pitch Play, Pad FX, Auto Loop, Key Shift


Capture

Extract only the drum parts of the track loaded on the deck and capture them so you can drop them into another track later.

Layout based on the latest club-standard DJ gear

The DDJ-GRV6 features large jog wheels that are ideal for scratching, 8 Performance Pads which are positioned above the jogs - just as they are on the flagship CDJ-3000 multi player - and Beat FX from the DJM-A9 in the mixer section. All this means you can play with a feeling similar to using club-standard equipment, and perform dynamically by combining expressive scratching with pad and effect techniques that are perfect for club sets.

Smart Rotary Selector and Discover function revolutionize track selection

Smart Rotary Selector

The new Smart Rotary Selector on the DDJ-GRV6 allows for up/down and left/right tilting as well as conventional rotation and push operations when using rekordbox for Mac/Windows ver. 7. The left/right tilt enables intuitive navigation through the media browser, tree view, and track list, while the up/down tilt allows fast navigation through playlists and collections, so you can quickly find the track you want, no matter how big your music library is.

Discover function

By pressing the Discover button, you can quickly access the Track Suggestion feature, which helps you rediscover old favourites or encounter new songs.

*The Discover function is only available in rekordbox for Mac/Windows.

Remix performances with Stems FX in Serato DJ Pro

The DDJ-GRV6 is compatible with Serato DJ Pro, which includes a Stems FX feature. Express yourself musically by applying effects such as Roll, Trans, Echo Out, and Delay to the separate Stems of a track - drums, bass, vocal, or melody. Apply the overlay sheet included with the DDJ-GRV6 to change the button labels to Stems FX for ease of use.

Multi-device compatibility: DJ with your PC/Mac, mobile device, and more

You can choose to use the DDJ-GRV6 with not only rekordbox for Mac/Windows but also rekordbox for iOS/Android. With the option of playing via a mobile device, you have freedom to DJ in your preferred style and in a variety of different settings.

*The DDJ-GRV6 does not support Bluetoothr connections.

*Only channels 1 and 2 are available for playback in rekordbox for iOS/Android.

Intuitive user experience and sophisticated design

While it includes many advanced features, the matte black finish and ergonomic design mean you can easily find your way around the DDJ-GRV6. Despite the variety of functions, the minimalistic display and indicators offer intuitive access to the functions you need. And the Groove Circuit, one of the unit's key features, is cleanly laid out above the Performance Pads with a "step up" in between, ensuring you won't accidentally touch a jog wheel when you're using it. This sleek design allows you to get creative in performances that can be as simple or intricate as you like.

Other features

4-channel mixer

The mixer section has 4 channels, so you can create mashups freely, or scratch on the fly

USB Type-C

Connect your PC/Mac or mobile device directly to the controller's USB Type-C terminal with a single cable. For PC/Mac, power is supplied via USB. For mobile devices, power must be supplied to the DDJ-GRV6 from an outlet or mobile battery.

Built-in sound card (audio interface)

Thanks to a built-in sound card, the DJ controller connects straight to your speakers or amplifier with a single TRS/RCA cable.

Class compliant

Plug your DJ controller into your PC/Mac and start DJing - there's no need to install an audio driver.

Firmware Update Manager

You'll be automatically notified when firmware updates become available.

AlphaTheta Care

AlphaTheta's extended product warranty service ensures longer and more reliable use of your products.

Specifications
Maximum Dimensions (W × D × H): 711.4 × 375.9 × 75.7 mm / 28.0" × 14.8" × 3.0"
Main unit weight: 4.6 kg / 10.2 lbs.
Frequency response : 20 Hz - 20 kHz (USB)
S/N ratio: 104 dB (USB)
Total harmonic distortion: 0.003% (USB)
Power supply: DC 9 V, 3.0 A (USB power adapter), DC 5 V, 1.5 A (USB bus power)

Accessories:
USB cable (C to C)
Overlay sheet
Quick Start Guide
Precautions for Use
Warranty (for some regions)

Compatible software:
rekordbox for Mac/Windows
rekordbox for iOS/Android
Serato DJ Pro

Terminals
Inputs: MIC × 1 (1/4? TRS jack × 1)
Outputs: MASTER × 2 (1/4? TRS jack × 1, RCA × 1) , BOOTH × 1 (RCA × 1) , PHONES × 2 (1/4" stereo jack × 1, 3.5 mm stereo mini jack × 1)
USB: USB Type-C × 2

Performance Control

Channels: 4
Deck Control: 4 / Dual
Jog Wheel: 206 mm
Sampler: (rekordbox) 16 slot × 4 bank, (Serato DJ Pro) 8 slot × 4 bank
Hot Cues: 8
Pad Modes: (rekordbox) Hot Cue, Stems, Beat Jump, Sampler, Keyboard, Pad FX, Beat Loop, Key Shift
(Serato DJ Pro) Hot Cue, Stems, Beat Jump, Sampler, Pitch Play, Pad FX, Auto Loop, Key Shift

Notes: Dedicated transmitter which enables SonicLink connection.

The dedicated transmitter HP-TX01 instantly transfers sound to the HDJ-F10 via ultra-low latency wireless communication with simply connecting to DJ mixer. Any DJ mixer equipped with a PHONE or 3.5 mm stereo mini jack monitor output can be used with the HDJ-F10. It is compact, lightweight, and easy to carry with your gear.

*The HP-TX01 does not support a wireless connection with the WAVE-EIGHT portable wireless DJ speaker.

Notes: ***B-STOCK: Box opened, product in perfect working order***


All-in-one wireless controller from Pioneer's parent company. A fresh new take on DJ units, featuring a two-deck setup with large touchscreen, up to five hours' playback from the internal battery. A flexible, portable option for all DJs.

Supplier's Notes:
Portability and playability

Easily carry the OMNIS-DUO anywhere thanks to its compact size, modest weight, and rounded corners. The system's 2-deck + mixer layout feels great for DJing, and there are 2 modes for the touchscreen - Light and Dark - so you'll always see the displayed information, even in bright outdoor settings.

Bluetooth audio input

Invite a friend to connect their phone to the OMNIS-DUO via Bluetooth and you can drop their favourite track into your set. With the Bluetooth Playback function, you'll have control of the audio on the deck. So, you can adjust the volume and EQ, apply effects to the sound, change the tempo, use Hot Cues, and scratch.

5-hour battery

Play for up to 5 hours without plugging into the mains. You can also connect the AC adapter or plug in a compatible power bank (45W or more) to the dedicated USB Type-C terminal. And if you combine the OMNIS-DUO with the battery-powered WAVE-EIGHT speaker, which features ultra-low-latency SonicLink technology, you can enjoy wireless DJing for total freedom.

Support for multiple music sources

USB Type-A drives and SD cards can be plugged straight into the OMNIS-DUO, as well as a PC/Mac via the USB Type-C terminal for use with rekordbox Performance mode. The Wi-Fi function offers easy access to tracks on a PC/Mac, smartphone, or the cloud without a wired connection.

Flexible audio output options

There's no limit to the places you can hold a party, thanks to the Bluetooth audio output function. And when the time comes to play in a venue like a bar, you can use the professional XLR output, while the RCA terminals are perfect for plugging in monitor speakers at home.

Brand-new design

The OMNIS-DUO looks at home everywhere you take it - from professional events to spontaneous outdoor parties. Its new indigo colour is inspired by denim jeans, a classic and hugely versatile fashion item, and the unique curves of the unit create a sleek silhouette.

Specifications

Frequency Response: 20 Hz - 20 kHz
S/N Ratio: 112 dB (USB, SD)
Total Harmonic Distortion: <0.003% (USB, SD)
Battery Section Capacity: 47.52 Wh (Built-in rechargeable lithium-ion battery)
Play time: Approx. 5 hours
Charge time: Approx. 3 hours
Inputs: 2 MIC (1x XLR & 1/4" TRS Jack, 1x 1/4" TRS Jack), 1 LINE (Bluetooth [exclusive from output])
Outputs: 1 MASTER (XLR), 1 MASTER (RCA), 1 MASTER (Bluetooth [exclusive from input]), 1 BOOTH (Combined use with RCA output), 2 HEADPHONE MONITOR (1/4" Stereo Phone Jack, 3.5 mm Stereo Mini Jack)
USB: USB-A for thumb drive x 1, SD card x1, USB-C for PC/Mac control x 1 USB-C for power input (USB PD 45W) x 1
Maximum Dimensions (WxDxH): 500 × 307 × 71 mm / 19.7" x 12.1" x 2.8"
Weight: 4.6 kg / 10.1 lbs.

Wireless LAN section

Supported standards: IEEE 802.11 a/b/g/n/ac
Frequency band used: 2.4 GHz / 5 GHz

Bluetooth section

Wireless system Bluetooth: Ver.5.2
Frequency band used: 2.4 GHz
Compatible codecs: SBC, AAC

Notes: ***B-STOCK: Slight surface marks ***


Innovative real-time sound mangling is the name of the game with the Timetosser. Hook up a stereo audio signal, re-order and re-sequence on the fly for a unique twist on DJing and live remixing.

*** Firmware update - October 2022 ***

As well as some bug fixes, this firmware update will add two more play modes to the unit: a looper and a slicer. The Loop mode allows you to record a loop of up to 16 beats, play patterns during that recording and have the Timetosser loop that, or remix a recorded loop like you would do in the original Live mode. The Slicer mode allows you to make slices of a recorded loop and play those slices on top of the live audio in MPC style. Overall a very quick and easy way to make live samples of your ongoing audio.

Next to that, Alter Audio have added a full set of new preset patterns which auto-remix your music by adding in a bit of beat shuffling, some nice offbeat timings and drop in the odd mute and reverse within the pattern.

Nice to know: The update brings Apple silicon support for the Mac version of the VST3 plugin as well.

Supplier's Notes:
Timetosser is the first of its kind. An innovative hybrid between an audio effect and an electronic musical instrument, enabling you to playfully reorder any audio signal in real-time.

The novelty of Timetosser lies in the way it is used: the user is not simply enabling an effect, but has to actively and skillfully play the instrument in order to yield good results. By combining Timetosser with a classic DJ set-up, much value can be added to any stage act. Furthermore, Timetosser can be hooked up to any device, giving you much artistic freedom. From drum machines to modular synthesizers, from a single track on your mixer (e.g. guitar, vocals, drums .. ) to the master output. By adding Timetosser, you instantly gain a unique live effect by adding variety to your tracks and loops.

How does it work?

Standalone - Use the tap-tempo key to tap in sync with the music. From this, Timetosser learns the length of 1/4, 1/8 and 1/16 notes, as well as their triplets.

MIDI IN - Another option is to sync to midi-clock. By connecting the supplied mini-jack to DIN-5 adapter cable to the sync input, Timetosser is able to synchronise to an incoming midi-clock signal.

Analog Gate - The sync input also supports analog gate voltages. To use analog gate sync, just connect a standard mono mini-jack cable to the sync input directly.

MIDI OUT - Having both a MIDI-input and output means these will be usable from within your DAW software when Timetosser is connected to your computer. But the true advantage comes when Timetosser is used in standalone-mode. Since Timetosser detects the tempo of the incoming audio, the MIDI-output can be used to send out that tempo. This means you can synchronise your MIDI-gear and have them play in time with anything you feed into Timetosser. We're very excited about the possibilities this brings: blur the lines between deejaying and live performing by having synths and drum machines play alongside your tracks!

By pressing any of the keys of the upper row, the player basically selects a delay that is a multiple of the selected note length. By playing patterns using the upper keys , we can keep changing the delay time in a way that we can repeat a note, or change the order of the music entirely.

Size & weight

200 x 120 x 25 mm
380 grams

High-quality sound
Digital audio, up to
24-bit / 192 KHz
low noise, high quality codec
2-in / 2-out 1/4" jack connectors

CPU
180 MHz 32-bit ARM

microcontroller for real-time audio analysis and smooth visual feedback

VST plug-in

Use Timetosser as audio interface and plugin controller when connected to a computer

MIDI / Gate IN, MIDI OUT

Sync to MIDI-clock and analog gate voltage. Send detected or external sync as midi clock

Durable & minimal design

Sleek aluminium hardtop casing to withstand severe freestyle sessions
Full color spring loaded key switches for intuitive visual feedback and tactility
Compact (200x120x25mm.) and lightweight (380 gr.) standalone unit, ideal for touring

"Merge live performing with the DJ artform!"
Timetosser enables you to repeat parts and even completely change the order of any connected source. Have the power at your fingertips to instantly add variety to your tracks and loops.

Notes: Innovative real-time sound mangling is the name of the game with the Timetosser. Hook up a stereo audio signal, re-order and re-sequence on the fly for a unique twist on DJing and live remixing.

Supplier's Notes:
Timetosser is the first of its kind. An innovative hybrid between an audio effect and electronic musical instrument, enabling you to playfully reorder any audio signal in real-time.

Real-time sound mangling is the name of the game. Timetosser automatically detects the tempo of the incoming audio, samples it and chops it to length ready for re-triggering. Create new rhythms on the fly by actively playing the instrument, or let Timetosser serve you loops and slices of your live audio. By combining Timetosser with a classic DJ set-up, much value can be added to any stage act. Furthermore, Timetosser can be hooked up to any device, giving you much artistic freedom. From drum machines to modular synthesizers, from a single layer on your mixer (e.g. basslines, vocals, drums..) to the master output. By adding Timetosser, you instantly gain a unique live effect by adding variety to your tracks and loops.

How does it work?

Standalone - Use the tap-tempo key to tap in sync with the music. From this, Timetosser learns the length of 1/4, 1/8 and 1/16 notes, as well as their triplets.

MIDI IN - Another option is to sync to midi-clock. By connecting the supplied mini-jack to DIN-5 adapter cable to the sync input, Timetosser is able to synchronise to an incoming midi-clock signal.

Analog Gate - The sync input also supports analogue gate voltages. To use analogue gate sync, just connect a standard mono mini-jack cable to the sync input directly.

MIDI OUT - Having both a MIDI-input and output means these will be usable from within your DAW software when Timetosser is connected to your computer. But the true advantage comes when Timetosser is used in standalone-mode. Since Timetosser detects the tempo of the incoming audio, the MIDI-output can be used to send out that tempo. This means you can synchronise your MIDI-gear and have them play in time with anything you feed into Timetosser. Alter Audio are very excited about the possibilities this brings: blur the lines between deejaying and live performing by having synths and drum machines play alongside your tracks.

By pressing any of the keys of the upper row, you basically select a delay that is a multiple of the selected note length. By playing patterns using the upper keys, you can keep changing the delay time (in real-time!) in a way that you can repeat a note, or change the order of the music entirely.

Audio Plugin / USB connectivity

Besides being a standalone device, Timetosser can also be connected to your computer. This way, it becomes a USB MIDI interface and controller for the Timetosser audio plugin (VST & AU).

Timetosser's firmware can be upgraded through USB with the application that is downloadable from the support page.

The audio plugin is a virtual Timetosser that can be dropped as an effect on an audio track in your DAW. One of up to eight plugin instances can be selected and controlled from the hardware unit.

Unit size & weight

With included travel case and cable set: 220 x 140 x 50 mm / 630 grams

High quality sound

Digital audio: 24-bit / 96 KHz, low noise, high quality codec, 2-in / 2-out 1/4" jack connectors

CPU: 180 MHz 32-bit ARM

Microcontroller for real-time audio analysis and smooth visual feedback
VST plug-in: Use Timetosser as midi interface and plugin controller when connected to a computer

MIDI / Gate IN, MIDI OUT: Sync to MIDI-clock and analogue gate voltage. Send detected or external sync as MIDI-clock

Notes: Convert turntable outputs to line level with this simple but high quality pre-amp, suitable for DJ or hi-fi use. Switchable moving coil/moving magnet settings allow the Precision Phono Pre to work with most cartridges.

Supplier's Notes:
ART is proud to introduce the Precision Phono Preamp for those seeking to connect their turntable to PA or stereo in one quick and easy step. This standalone phono preamp interfaces both types of turntable cartridges Moving Coil (MC) and Moving Magnet (MM) to a wide variety of audio systems.

The Precision Phono Preamp's extraordinarily low noise amplifier allows connection to MC cartridges without picking up noise or distortion that transformers can exhibit. The audio is kept pristine with a low-cut filter to remove rumble and low frequency feedback, commonly undesirable for DJ's and home use.

Analogue inputs on the ART Precision Phono Pre amp are switchable between Moving Magnet and Moving Coil. The unit changes both the gain and the cartridge loading to suit the selected cartridge. The front gain trim control with the signal present/clip LED allows the user to optimize the output for a wide range of cartridges.

Specifications

Input Connections: Gold plated RCA jacks 47k / 100pf (MM) or 25/100 Ohms (MC, switchable)
Output Connections Gold plated RCA jacks, 100 Ohms
Max Input Level: 440 mV (1 kHz, MM mode) / 44mV (1kHZ, MC mode)
Max output level: 6V RMS / +18dBu
Maximum Gain: 43dB (MM)/63dB (MC)
Frequency Response: 20 Hz - 20 kHz, +/-0.5dB
Low Cut Filter: 22Hz, 2pole
THD: <0.0010% {typical}
E.I.N: 346nV, -127dBu
Chassis Type All: aluminium black anodized with integral rubber sides

Power Requirements

Input: 100-240V AC~50/60Hz
Output: 12V DC @ = 800 mA
Dimensions (HWD): 1.87-inch x 4.61-inch x 4.27-inch / 47.5mm x 117mm x 108mm
Weight: 1.89 lbs., 0.86 kg

Note: 0 dBu = 0.775Vrms

Notes: Limited Edition ATH-M50x

The LAB M50x Has Landed!

In January 2024, Audio Technica launched the LAB M50x website, inviting fans to participate in the creation of the latest limited edition M50x models.

From thousands of submissions, Sergio Gamarra Melgar, a DJ from Bolivia was selected by the fans from 3 finalists as creating the winning design.

The ATH-M50xBT2 is the second generation of the critically acclaimed M-Series wireless over-ear headphones. These headphones feature 45 mm large aperture drivers in a wireless design, so listeners will enjoy the same sonic signature of the legendary ATH-M50x studio headphones. With this update, Audio Technica have also introduced several noticeable enhancements, such as an updated USB-C connection, and multipoint pairing mode.

So, whether you're looking for high-fidelity audio for your commute to work or just relaxing and enjoying the music, the ATH-M50xBT2 lets you go wireless whenever you need it.

The ATH-M50xBT2 headphones deliver the legendary M50x studio sound - with exceptional clarity and deep, accurate bass response - for an exhilarating wireless listening experience.

With the ATH-M50xBT2 there's nothing to hold you back. You get up to 50 hours of continuous use on a full charge.

Download the A-T Connect app to gain greater control of your headphones. Easily activate low latency mode, adjust EQ, change L/R volume balance, select desired voice assistant, locate misplaced headphones, change codecs, and more.

Specifications

Headphones

Type: Closed-back dynamic
Driver Diameter: 45 mm
Frequency Response: 15 - 28,000 Hz
Sensitivity: 99 dB/mW
Impedance: 38 ohms
Battery: DC 3.7V lithium polymer battery
Battery Life: Approx. 50 hours continuous use
Weight: Approx. 307g
Charging Time: Approx. 3.5 hours
Microphone Type: MEMS type
Microphone Sensitivity: -38 dB (1V/Pa at 1 kHz)
Microphone Frequency Response: 85 -15,000 Hz
Microphone Polar Pattern: Omnidirectional
Accessories Included: USB charging cable(30cm?USB Type-A / USB Type-C), Audio cable (1.2m/ f3.5mm stereo mini-plug), Pouch

Bluetooth

Bluetoothr Version: Bluetooth Ver.5.0
Operating Range: Line of sight - approx. 10 m (33')
Compatible Bluetooth Profiles: A2DP, AVRCP, HFP, HSP
Support Codec: LDAC / AAC, SBC

Notes: Part of a limited edition series designed through the LAB M50x website, this take on the popular ATH-M50x features a subtle blue and orange colour scheme. Also available in wireless Bluetooth format.

Supplier's Notes:
Limited Edition ATH-M50x

The LAB M50x Has Landed!

In January 2024, Audio Technica launched the LAB M50x website, inviting fans to participate in the creation of the latest limited edition M50x models.

From thousands of submissions, Sergio Gamarra Melgar, a DJ from Bolivia was selected by the fans from 3 finalists as creating the winning design.

ATH-M50x: Most Popular Studio & Everyday Headphones

The M50x are one of Audio Technica's most acclaimed audio solutions and their best-selling headphones. Based on the ATH-M50, the M50x include an upgraded detachable cable for convenience and versatility, perfect for the studio or when you're out on the move.

Enjoy passive noise isolation through the comfortable ear cups designed to keep you in the zone, while their large aperture drivers deliver the industry-loved sound signature.

Engineered to deliver a superior sound experience at an affordable price, the M50x have been widely acclaimed online by professionals and casual listeners. From everyday listening and commuting to studio recording, you're in great hands with the M50x, with build quality and coveted sound engineering that's praised by audio experts and professionals year after year.

With 60 years of Japanese audio design, Audio-Technica is loved by many of the world's biggest artists, vocalists and musicians and the M50x headphones remain one of Audio Technica's most popular innovations to date. Whether you're a music industry veteran or you're looking to start recording at home, the ATH-M50x are an excellent choice of headphones for listening back to or monitoring your audio performance. Either from your computer/audio receiver or plugged directly into your microphone for monitoring (as with the AT2020 or AT2020USB+ microphones), the ATH-M50x headphones deliver stunning sound design.

Rated highly for their professional-grade comfort, foldable versatility, strong construction and excellent sound design, the ATH-M50x are an exquisite choice as your audio daily drivers. Whether it's travel, your daily commute or working and studying at home, you'll love their all-day comfort and immersive sound design. Offering passive noise isolation through circumaural design contours, these M50x headphones provide a high-quality audio experience, helping you to boost your concentration and productivity at work and allowing you to meditatively switch off on your commute.

Specifications

Headphones

Type: Closed-back dynamic
Driver Diameter: 45mm
Frequency Response: 15 - 28,000 Hz
Maximum Input Power: 1,600 mW @ 1KHz
Sensitivity: 99 dB
Impedance: 38 ohms
Weight : 285g without cable/connector
Cable: 1.2m-3m coiled, 3m straight, 1.2m straight cables
Cable - Detachable: Yes
Connector: Gold-plated stereo 1/8" (3.5 mm) connector with strain relief
Magnet: Neodymium
Voice Coil: CCAW (Copper-clad aluminium wire)
Folding/collapsible: Yes

Accessories Included:

Screw-on 1/4" adapter, pouch

Notes: Great sound you can count on

The Austrian Audio OD303 dynamic stage mic offers effortless sound quality and rugged reliability, for great sound you can count on.

The well-balanced, open, but at the same time powerful sound is unparalleled at this price point.

With its rugged construction, the OD303 will withstand daily use in the rehearsal room and the rigors of a hard touring life without problem. The die-cast housing is almost indestructible and the microphone fits perfectly in the hand.

Technical Specifications

Directional characteristic: Supercardiod
Frequency range: 35Hz - 16kHz
Sensitivity: 1.8 mV/Pa
Pop noise protection: 3D Pop Noise Diffuser
Impedance: 1200 O (symmetrical)
Load impedance: > 1 kO
Main connector: XLR 3 pin
Dimensions: 194 x 53 x 53mm
Weight: 330g

Notes: Introducing Ear Shots Pro LED, the earphones that immerse you in a world of breathtaking audio free from distraction. Active noise cancelling technology blocks out background noise allowing you to focus solely on the music. Bluetooth 5.4 connectivity gives you freedom to listen wirelessly wherever you go, with up to 5 hours of continuous playback from a single charge. The innovative charging case delivers an additional 20 hours of playtime and incorporates a bright and responsive LED touch screen for control of your music and calls without needing access to your device.

Speaker: drivers13mmO dynamic
Frequency response: 20~20kHz
Noise cancellation: 30-35db
Impedance: 32 Ohms
Power: battery: 30mah each earbud, 300mah charging case
Battery life: 5h earbuds @ 50% volume, 20h charging case
Charge time: 1h for earbuds, 1h for dock
Bluetooth version: v5.4
Bluetooth range: Up to 10m (clear line of sight)

Dimensions: 23 x 45 x 60mm
Weight: 65g

Notes: A handy extension cable with a power switch, removing the need to pull the USB Type-C connector out of your device every time you want to power up/down or reset. The switch itself has a solid 'click-on-click-off' action with LED indicator that sits in the middle of the 25cm lead, making it ideally positioned beside your device when connected. This updated version is compatible for the latest Quick Charge and Power Delivery mains adaptors and is ideal for Raspberry Pi 4 model B, laptops, tablets, smart phones and more.

USB Type-C socket to USB Type-C plug extension
Integral power button with LED indicator and solid click action
Updated version compatible with the latest Quick Charge and Power Delivery mains adapters.

Cable: diameter: 4mm
Cable: length: 27.5cm (including connectors)
Weight: 18g

Notes: Clean sound and excellent value from DAP's handheld condenser mic. Smooth frequency response tailored for vocals, solid build and reliable performance.

Supplier's Notes:
The DAP EDGE VCM-1 is a premium condenser microphone for vocals with an exceptionally detailed sound. It picks up all the subtleties and delivers a highly accurate reproduction of any singer in live and studio situations. Its supercardioid polar pattern rejects stage noise and feedback in live situations and the internal shock mount minimises handling noise. The sturdy metal housing ensures its durability for life on the road.

Premium-quality supercardioid condenser capsule
Suitable for live singing, acting, and presenting
High gain before feedback
Internal shock absorption to eliminate handling noise
High-quality metal housing

Specifications

Outputs:

Microphone Output Connection: 3-pin XLR
Microphone Impedance: 150 O

Audio Specifications

Microphone Type: Condenser
Microphone Sensitivity: 4.5 mV
Polar Pattern: Super Cardioid
Max. SPL: 140 dB
Frequency Response Minimum: 50 Hz
Frequency Response Maximum: 20000 Hz
Phantom Power: 48 V
Microphone On/Off Switch: No

Mechanical Specifications

Height (mm): 51 mm
Width (mm): 51 mm
Length (mm): 191 mm
Colour: Black
Weight: 0.26 kg

Notes: New large-capacity tote bag printed with Disk Union's square logo.

The bag is made of thick canvas weighing approximately 16 ounces, which can withstand heavy loads.

The size is also carefully designed to accommodate records.

It also features a large pocket on the inside.

Each piece is carefully printed by silk-screen print craftsmen in Japan.

Material: 100% cotton

Size: 40 cm (W) / 41.5 cm (H) / 12.5 cm (D)

Notes: New large-capacity tote bag printed with Disk Union's square logo.

The bag is made of thick canvas weighing approximately 16 ounces, which can withstand heavy loads.

The size is also carefully designed to accommodate records.

It also features a large pocket on the inside.

Each piece is carefully printed by silk-screen print craftsmen in Japan.

Material: 100% cotton

Size: 40 cm (W) / 41.5 cm (H) / 12.5 cm (D)

Notes: New large-capacity tote bag printed with Disk Union's square logo.

The bag is made of thick canvas weighing approximately 16 ounces, which can withstand heavy loads.

The size is also carefully designed to accommodate records.

It also features a large pocket on the inside.

Each piece is carefully printed by silk-screen print craftsmen in Japan.

Material: 100% cotton

Size: 40 cm (W) / 41.5 cm (H) / 12.5 cm (D)

Notes: The Chroma USB Drive is a 128GB dual USB-A and USB-C drive designed specifically for DJs.

This drive has especially-chosen USB 3.2 memory, enabling fast library syncing on Rekordbox and Engine (sync in seconds, not painful hours).

Optimized for pro use, the Chroma Drive went through rigorous testing across Pioneer DJ and Denon DJ gear.

It's incredibly reliable for long gigs and harsh conditions. Sync faster, perform smoother, and never worry about adapters again!

Sync in seconds, not hours

Have you ever waited an hour for just 100 songs to upload to your USB from Rekordbox? It's not optimized for DJing. Rarely advertised on USB drives are the actual read and write speeds for DJ-style transfers. Most USB drives have memory not designed to update lots of little files quickly (metadata, cues, songs, analysis data, etc), but better at single/big files (i.e: a large single video file). DJs libraries aren't single files - they're lots of different files that have to be checked, updated, and then added to - all done concurrently.

Tested by DJs for thousands of hours

We've tested these with 350+ hour (two week) marathon DJ sets, using drives on all Pioneer DJ and Denon DJ all-in-ones and media players (CDJs), heavy media recording (DJ sets, 4k ProRes video), Stressdisk testing to ensure the memory has a long use life, high dust / high heat environments in the middle of the Black Rock Desert, heavy repeated plugging/unplugging (500+ times) to simulate long-term wear on the connectors.

Maximum DJ gear compatibility

The drive comes pre-formatted as FAT32. Yes, some newer DJ gear can work with ExFAT and HFS drive formats, but for maximum compatibility with all DJ gear, even just 3-4 year old units, FAT32 makes the most sense. For best results, this means you should leave 10-15% of the drive free to avoid library corruption.

Works with as many pieces of DJ gear as possible out of the box:

The drive comes pre-formatted as FAT32. Yes, some newer DJ gear can work with ExFAT and HFS drive formats, but for maximum compatibility with all DJ gear, even just 3-4 year old units, FAT32 makes the most sense. The only major limitation is that you cannot copy over files larger than 4 GB onto these drives. So if you want to have a very long lossless set stored on your drive, or use it to copy other types of media, you can reformat it easily. We recommend keeping all of your DJ drives FAT32 to make sure that older firmwares and gear all work seamlessly for your future.

Works with:

XDJ-AZ
XDJ-XZ
XDJ-RX, RX2, RX3, RR
Opus QUAD, OMNIS Duo
CDJ-3000, CDJ-2000/NXS/NXS2
XDJ-1000/MK2
Prime GO, Prime 2, Prime 4, plus the plus models
SC5000, SC6000, plus the M models
Honestly, pretty much any DJ device made in the last two decades that uses a USB port on it and can accept FAT32 formatted drives

Tech Specs
High speed USB flash memory designed for rapid-transfer of many smaller files
USB 3.2 Gen 1 (with memory that performs well at lots of rapid small file updates and read/writes like in Rekordbox syncing)
Quality metal alloy build
Engraved with DJ TechTools logo on one side. The other side is blank, but can be customized
Dual USB connectors in USB-A and USB-C
Rotatable cover (with satisfying mechanical action) to protect connector not being used
1 year limited warranty for mechanical issues (water, accidental, or intentional damage not covered, please buy an Extend warranty if you want all issues covered).
Support from DJ Techtools staff for all drive issues

Drive Specs:

Size: 128gb
Connector Type: USB-A + USB-C
Read Speed: 160-180MB/s
Write Speed: 240-260MB/s
Material: Zinc Alloy

Notes: The Chroma USB Drive is a 128GB dual USB-A and USB-C drive designed specifically for DJs.

This drive has especially-chosen USB 3.2 memory, enabling fast library syncing on Rekordbox and Engine (sync in seconds, not painful hours).

Optimized for pro use, the Chroma Drive went through rigorous testing across Pioneer DJ and Denon DJ gear.

It's incredibly reliable for long gigs and harsh conditions. Sync faster, perform smoother, and never worry about adapters again!

Sync in seconds, not hours

Have you ever waited an hour for just 100 songs to upload to your USB from Rekordbox? It's not optimized for DJing. Rarely advertised on USB drives are the actual read and write speeds for DJ-style transfers. Most USB drives have memory not designed to update lots of little files quickly (metadata, cues, songs, analysis data, etc), but better at single/big files (i.e: a large single video file). DJs libraries aren't single files - they're lots of different files that have to be checked, updated, and then added to - all done concurrently.

Tested by DJs for thousands of hours

We've tested these with 350+ hour (two week) marathon DJ sets, using drives on all Pioneer DJ and Denon DJ all-in-ones and media players (CDJs), heavy media recording (DJ sets, 4k ProRes video), Stressdisk testing to ensure the memory has a long use life, high dust / high heat environments in the middle of the Black Rock Desert, heavy repeated plugging/unplugging (500+ times) to simulate long-term wear on the connectors.

Maximum DJ gear compatibility

The drive comes pre-formatted as FAT32. Yes, some newer DJ gear can work with ExFAT and HFS drive formats, but for maximum compatibility with all DJ gear, even just 3-4 year old units, FAT32 makes the most sense. For best results, this means you should leave 10-15% of the drive free to avoid library corruption.

Works with as many pieces of DJ gear as possible out of the box:

The drive comes pre-formatted as FAT32. Yes, some newer DJ gear can work with ExFAT and HFS drive formats, but for maximum compatibility with all DJ gear, even just 3-4 year old units, FAT32 makes the most sense. The only major limitation is that you cannot copy over files larger than 4 GB onto these drives. So if you want to have a very long lossless set stored on your drive, or use it to copy other types of media, you can reformat it easily. We recommend keeping all of your DJ drives FAT32 to make sure that older firmwares and gear all work seamlessly for your future.

Works with:

XDJ-AZ
XDJ-XZ
XDJ-RX, RX2, RX3, RR
Opus QUAD, OMNIS Duo
CDJ-3000, CDJ-2000/NXS/NXS2
XDJ-1000/MK2
Prime GO, Prime 2, Prime 4, plus the plus models
SC5000, SC6000, plus the M models
Honestly, pretty much any DJ device made in the last two decades that uses a USB port on it and can accept FAT32 formatted drives

Tech Specs
High speed USB flash memory designed for rapid-transfer of many smaller files
USB 3.2 Gen 1 (with memory that performs well at lots of rapid small file updates and read/writes like in Rekordbox syncing)
Quality metal alloy build
Engraved with DJ TechTools logo on one side. The other side is blank, but can be customized
Dual USB connectors in USB-A and USB-C
Rotatable cover (with satisfying mechanical action) to protect connector not being used
1 year limited warranty for mechanical issues (water, accidental, or intentional damage not covered, please buy an Extend warranty if you want all issues covered).
Support from DJ Techtools staff for all drive issues

Drive Specs:

Size: 128gb
Connector Type: USB-A + USB-C
Read Speed: 160-180MB/s
Write Speed: 240-260MB/s
Material: Zinc Alloy

Notes: The Chroma USB Drive is a 128GB dual USB-A and USB-C drive designed specifically for DJs.

This drive has especially-chosen USB 3.2 memory, enabling fast library syncing on Rekordbox and Engine (sync in seconds, not painful hours).

Optimized for pro use, the Chroma Drive went through rigorous testing across Pioneer DJ and Denon DJ gear.

It's incredibly reliable for long gigs and harsh conditions. Sync faster, perform smoother, and never worry about adapters again!

Sync in seconds, not hours

Have you ever waited an hour for just 100 songs to upload to your USB from Rekordbox? It's not optimized for DJing. Rarely advertised on USB drives are the actual read and write speeds for DJ-style transfers. Most USB drives have memory not designed to update lots of little files quickly (metadata, cues, songs, analysis data, etc), but better at single/big files (i.e: a large single video file). DJs libraries aren't single files - they're lots of different files that have to be checked, updated, and then added to - all done concurrently.

Tested by DJs for thousands of hours

We've tested these with 350+ hour (two week) marathon DJ sets, using drives on all Pioneer DJ and Denon DJ all-in-ones and media players (CDJs), heavy media recording (DJ sets, 4k ProRes video), Stressdisk testing to ensure the memory has a long use life, high dust / high heat environments in the middle of the Black Rock Desert, heavy repeated plugging/unplugging (500+ times) to simulate long-term wear on the connectors.

Maximum DJ gear compatibility

The drive comes pre-formatted as FAT32. Yes, some newer DJ gear can work with ExFAT and HFS drive formats, but for maximum compatibility with all DJ gear, even just 3-4 year old units, FAT32 makes the most sense. For best results, this means you should leave 10-15% of the drive free to avoid library corruption.

Works with as many pieces of DJ gear as possible out of the box:

The drive comes pre-formatted as FAT32. Yes, some newer DJ gear can work with ExFAT and HFS drive formats, but for maximum compatibility with all DJ gear, even just 3-4 year old units, FAT32 makes the most sense. The only major limitation is that you cannot copy over files larger than 4 GB onto these drives. So if you want to have a very long lossless set stored on your drive, or use it to copy other types of media, you can reformat it easily. We recommend keeping all of your DJ drives FAT32 to make sure that older firmwares and gear all work seamlessly for your future.

Works with:

XDJ-AZ
XDJ-XZ
XDJ-RX, RX2, RX3, RR
Opus QUAD, OMNIS Duo
CDJ-3000, CDJ-2000/NXS/NXS2
XDJ-1000/MK2
Prime GO, Prime 2, Prime 4, plus the plus models
SC5000, SC6000, plus the M models
Honestly, pretty much any DJ device made in the last two decades that uses a USB port on it and can accept FAT32 formatted drives

Tech Specs
High speed USB flash memory designed for rapid-transfer of many smaller files
USB 3.2 Gen 1 (with memory that performs well at lots of rapid small file updates and read/writes like in Rekordbox syncing)
Quality metal alloy build
Engraved with DJ TechTools logo on one side. The other side is blank, but can be customized
Dual USB connectors in USB-A and USB-C
Rotatable cover (with satisfying mechanical action) to protect connector not being used
1 year limited warranty for mechanical issues (water, accidental, or intentional damage not covered, please buy an Extend warranty if you want all issues covered).
Support from DJ Techtools staff for all drive issues

Drive Specs:

Size: 128gb
Connector Type: USB-A + USB-C
Read Speed: 160-180MB/s
Write Speed: 240-260MB/s
Material: Zinc Alloy

Notes: Space grey version of the specially designed Chroma USB drive from DJ Tech Tools. Optimised for DJ use, the Chroma offers USB-C and USB-A connections to ensure fast performance and compatibility with both Denon and Pioneer players.

Supplier's Notes:
The Chroma USB Drive is a 128GB dual USB-A and USB-C drive designed specifically for DJs.

This drive has especially-chosen USB 3.2 memory, enabling fast library syncing on Rekordbox and Engine (sync in seconds, not painful hours).

Optimized for pro use, the Chroma Drive went through rigorous testing across Pioneer DJ and Denon DJ gear.

It's incredibly reliable for long gigs and harsh conditions. Sync faster, perform smoother, and never worry about adapters again!

Sync in seconds, not hours

Have you ever waited an hour for just 100 songs to upload to your USB from Rekordbox? It's not optimized for DJing. Rarely advertised on USB drives are the actual read and write speeds for DJ-style transfers. Most USB drives have memory not designed to update lots of little files quickly (metadata, cues, songs, analysis data, etc), but better at single/big files (i.e: a large single video file). DJs libraries aren't single files - they're lots of different files that have to be checked, updated, and then added to - all done concurrently.

Tested by DJs for thousands of hours

We've tested these with 350+ hour (two week) marathon DJ sets, using drives on all Pioneer DJ and Denon DJ all-in-ones and media players (CDJs), heavy media recording (DJ sets, 4k ProRes video), Stressdisk testing to ensure the memory has a long use life, high dust / high heat environments in the middle of the Black Rock Desert, heavy repeated plugging/unplugging (500+ times) to simulate long-term wear on the connectors.

Maximum DJ gear compatibility

The drive comes pre-formatted as FAT32. Yes, some newer DJ gear can work with ExFAT and HFS drive formats, but for maximum compatibility with all DJ gear, even just 3-4 year old units, FAT32 makes the most sense. For best results, this means you should leave 10-15% of the drive free to avoid library corruption.

Works with as many pieces of DJ gear as possible out of the box:

The drive comes pre-formatted as FAT32. Yes, some newer DJ gear can work with ExFAT and HFS drive formats, but for maximum compatibility with all DJ gear, even just 3-4 year old units, FAT32 makes the most sense. The only major limitation is that you cannot copy over files larger than 4 GB onto these drives. So if you want to have a very long lossless set stored on your drive, or use it to copy other types of media, you can reformat it easily. We recommend keeping all of your DJ drives FAT32 to make sure that older firmwares and gear all work seamlessly for your future.

Works with:

XDJ-AZ
XDJ-XZ
XDJ-RX, RX2, RX3, RR
Opus QUAD, OMNIS Duo
CDJ-3000, CDJ-2000/NXS/NXS2
XDJ-1000/MK2
Prime GO, Prime 2, Prime 4, plus the plus models
SC5000, SC6000, plus the M models
Honestly, pretty much any DJ device made in the last two decades that uses a USB port on it and can accept FAT32 formatted drives

Tech Specs
High speed USB flash memory designed for rapid-transfer of many smaller files
USB 3.2 Gen 1 (with memory that performs well at lots of rapid small file updates and read/writes like in Rekordbox syncing)
Quality metal alloy build
Engraved with DJ TechTools logo on one side. The other side is blank, but can be customized
Dual USB connectors in USB-A and USB-C
Rotatable cover (with satisfying mechanical action) to protect connector not being used
1 year limited warranty for mechanical issues (water, accidental, or intentional damage not covered, please buy an Extend warranty if you want all issues covered).
Support from DJ Techtools staff for all drive issues

Drive Specs:

Size: 128gb
Connector Type: USB-A + USB-C
Read Speed: 160-180MB/s
Write Speed: 240-260MB/s
Material: Zinc Alloy

Notes: The Chroma USB Drive is a 256GB dual USB-A and USB-C drive designed specifically for DJs. This drive is has specially-chosen USB 3.2 memory, enabling fast library syncing on Rekordbox and Engine (sync in seconds, not painful hours). Optimized for pro use, the Chroma Drive went through rigorous testing across Pioneer DJ and Denon DJ gear. It's incredibly reliable for long gigs and harsh conditions. Sync faster, perform smoother, and never worry about adapters again!

Notes: The Chroma USB Drive is a 256GB dual USB-A and USB-C drive designed specifically for DJs. This drive is has specially-chosen USB 3.2 memory, enabling fast library syncing on Rekordbox and Engine (sync in seconds, not painful hours). Optimized for pro use, the Chroma Drive went through rigorous testing across Pioneer DJ and Denon DJ gear. It's incredibly reliable for long gigs and harsh conditions. Sync faster, perform smoother, and never worry about adapters again!

Notes: The Chroma USB Drive is a 256GB dual USB-A and USB-C drive designed specifically for DJs. This drive is has specially-chosen USB 3.2 memory, enabling fast library syncing on Rekordbox and Engine (sync in seconds, not painful hours). Optimized for pro use, the Chroma Drive went through rigorous testing across Pioneer DJ and Denon DJ gear. It's incredibly reliable for long gigs and harsh conditions. Sync faster, perform smoother, and never worry about adapters again!

Notes: The Chroma USB Drive is a 256GB dual USB-A and USB-C drive designed specifically for DJs. This drive is has specially-chosen USB 3.2 memory, enabling fast library syncing on Rekordbox and Engine (sync in seconds, not painful hours). Optimized for pro use, the Chroma Drive went through rigorous testing across Pioneer DJ and Denon DJ gear. It's incredibly reliable for long gigs and harsh conditions. Sync faster, perform smoother, and never worry about adapters again!

Notes: 2024 version of FM3's generative music device, part of a special edition release also available in graphite. Create infinite soundscapes at the touch of a button.

Supplier's Notes:
FM3 proudly presents the Buddha Machine SE. This special edition is available in a sleek metallic colour- silver.

Notes: ***B-STOCK: Box damaged, but product is in excellent condition and in perfect working order***


The Glorious 12" record box 230 is a plain and solid storage system which holds 230 12" records. It is made of quality MDF wood with black shrink-wrap finish.

Notes: Protect and display:

The Glorious Vinyl Vault for vinyl collections

The Glorious Vinyl Vault not only protects records, but also displays them perfectly. It is the ideal combination of functionality, aesthetics and quality for vinyl collections. With practical drawers, the vinyl record cabinet offers a convenient way to browse through your records collection and display and organise them in an eye-catching way.

Sophisticated design for effortless browsing

The record storage cabinet is equipped with soft-closing drawers. Each drawer offers space for up to 80 valuable 12" records. The LPs are easily accessible at the back of the drawer thanks to the telescopic full-extension runner, making it easy to reach the desired albums. The back of the drawer is also steplessly adjustable for flexible record loading.

Modular solution for growing collections

With a total capacity of up to 160 12'' records (capacity may vary depending on the type of cover), the modular storage solution is ideal for vinyl lovers with a growing collection. The modular design allows a perfect combination with other Vinyl Vault modules or the Glorious Record Rack 330 series.

Secure and stylish

Pre-drilled mounting holes ensure secure wall mounting and stability (mandatory). Thanks to Glorious's high design and quality standards, installation is simple and can be completed in just a few steps. The Glorious vinyl LP storage system is supplied flat-packed including mounting materials.

Specifications

Features

Modular record storage cabinet with convenient drawers for flipping through records
Perfect for displaying and sorting your record collection
Capacity for up to 160 pcs. 12'' vinyl records (capacity may vary on type of cover)
Soft-closing drawers that each holds up to 80 pcs. 12" vinyl records
Vinyl drawers are on telescoping, full-extension hardware, so finding a record tucked in the back of the drawer is easy
Stepless adjustable drawer back panel for variable record capacity
Pre-drilled fixture holes for secure wall mounting (mandatory for safe installation)
Modular vinyl storage system matches further Vinyl Vault modules or also the Glorious Record Rack 330 series
Includes 4 felt glides for floor protection
Easy assembly in just a few steps with Glorious design & quality standards
Ships flat-packed, including assembly materials
Delivery without decoration

Technical Data

Material: Particle Board, MDF
External dimensions: 406(W) x 342(D) x 856(H) mm
Vinyl drawer dimensions: 368(W) x 260(D) x 240(H) mm
Weight: 17.90 kg
Recommended maximum load desk top: 34.5 kg
Recommended maximum load pull-out drawers: 24.5 kg each
Delivery without decoration

Notes: Haspro Party Earplugs are professional earplugs for concerts, festivals and other types of mass events. Wherever there is a high level of noise, which can negatively affect your well-being. These are comfortable, virtually invisible earplugs with a built-in acoustic filter specially created for fans of mass events.

Haspro Party music earplugs are all about comfort of use and discretion. Thanks to their small size and color, they become practically imperceptible in the ear. On the other hand, the greatest joy is the acoustic filter, which does not cause sound distortion or excessive attenuation. On the contrary - when using earplugs for concerts, you can enjoy the highest quality and clarity of sound. Thanks to these solutions, every mass event, concert or outdoor is pure pleasure, and at the same time protects your health and your ear.

Notes: Haspro Pure Music Universal are universal earplugs ideally suited for musicians and fans of concerts and festivals. They will work wherever you want to enjoy music and at the same time take care of your hearing. Thanks to the use of innovative filters, the earplugs evenly reduce noise so as to preserve the full spectrum of sound and allow you to communicate freely, while protecting your hearing. You can wear them for hours with peace of mind, enjoying the comfort and safety of your ear canal, as they are made of hypoallergenic silicone.

Unlike other earplugs available on the market, these filters have an advanced membrane design. Most importantly - it is linear damping. This means that the sounds are not distorted or muted like with regular earplugs. Despite the volume down, which can be compared to the volume down of a knob in the speaker, they provide "clarity" of sound and at the same time adequate hearing protection. In addition, the filter mutes other, unwanted sounds such as the sounds of the phone, radio or loud conversations.

Notes: Blue version of the DJ Control Inpulse 200 MK2, a superb option for beginners and anyone looking for an ultra-portable DJ controller. Great value.

Supplier's Notes:
Elevate your DJing journey with the Hercules DJControl Inpulse 200 MK2 Blue Edition. This sleekcontroller comes packed with powerful features, including Serato DJ Lite and DJUCED software,designed to inspire creativity and unlock your full potential. The groundbreaking Stems feature lets youeffortlessly blend instrumentals from one track with vocals from another, opening endless possibilities for unique mixes.

Master the art of beatmatching with the intuitive Beatmatch Guide, featuring built-in light indicators below each jog wheel and beside each tempo fader, making track syncing a breeze. With 4 performance pads and 4 versatile modes (Hot Cue, Stems, FX, Sampler), you'll have everything you need to craftseamless, professional-level transitions that will captivate any crowd.

Whether you're a beginner or looking to refine your skills, the DJ Academy video tutorials offer step-by-step guidance, expert tips, and tricks to help you perfect your mixing techniques and take your sets to the next level. Let your creativity shine with the DJControl Inpulse 200 MK2 Blue Edition

Notes: Great value DJ speakers, ideal for home setups. Excellent clarity, plenty of power and solid bass response thanks to 5-inch Kevlar woofers. Sold as a pair.

Supplier's Notes:
Optimized for music production and mixing, this pair of active, bi-amplified Hercules Monitor 5 speakers (2 x 80 watts RMS) will take your home studio to the next level with precise, clear and powerful audio rendering.

Box contents:

2 monitoring speakers
2 power cables
User manual and warranty information

Speaker Connectivity:

1/4" Jack / TS
RCA
XLR

Notes: The larger model in M-Audio's Forty series, the Eighty features an eight-inch woofer for impressive bass response, plus Bluetooth for quick streaming from devices. Voice modes can be customised to the user's taste, with Flat and Hype settings for quick comparisons across different sonic profiles.

Supplier's Notes:
The Forty Series brings pristine audio to life with built-in DSP that provides precise crossover and customisable equalisation to deliver sound quality above and beyond the analogue filtering currently available in monitors at this price point.

M-Audio Forty Series: Experience your sound

Designed for every beat-maker, producer, DJ, mix engineer, content creator and party starter out there. The M-Audio Forty Series is a perfect choice for the new generation of creators.

For the producer hustle

Whether you're laying down heavy beats, tracking powerful lead guitar riffs, or crafting euphoric electronic adventures, the Forty Sixty and Forty Eighty monitors are clever production partners. Enjoy detailed and customisable sound that invites every element of your track to come to life. With these monitors, what you hear in your studio will sound outstanding in the club, on streaming platforms, and everywhere in between.

DJ Essentials

The Forty Series monitors are built to handle deep bass lines and crisp highs so you can keep track of your mix and deliver the smoothest transitions and fattest double drops with absolute precision. Whether you're practicing your set or throwing a party, your mix will sound tight and dynamic, giving you the confidence to push your mix to the max.

Precision sound engineering

Mix engineers are familiar with the importance of precision and clarity, and that's exactly where the Forty Series delivers. With professional-grade Burr-Brown analogue-to-digital conversion and DSP processing, you'll hear every detail of your mix. These monitors create a clean and accurate representation of your sound, so you can make informed decisions and craft mixes that translate perfectly from car systems to club systems.

The creator's workhorse

For content creators, consistent sound quality is everything. Whether you're producing a podcast, editing a video, or streaming, the Forty Series monitors deliver crystal-clear audio that ensures your content sounds professional. The precise DSP crossover helps you pick up every detail, ensuring your audience hears exactly what you intended.

Party with Bluetooth

Throwing a house party or just want to kick back and jam? The Forty Series allows you to do just that with Bluetooth 5.0 true wireless stereo (TWS) audio streaming. Simply connect any device and fill your space with rich sound. No cables, no hassle - just seamless and immersive sound that keeps the party going.

Instant listening modes

A lot of time and precision goes in to delivering a perfected final mixdown, but music is enjoyed outside of a perfectly treated acoustic room. To address this, M-Audio designed a simple front panel button that allows you to easily switch from a ruler-flat mix reference to HYPE mode that emulates a mix common in ear buds and car stereos. Beyond that, experiment with a custom mode where you can specifically define all parameters of your sound with the M-Audio Studio Control App.

Tailor your sound with the M-Audio Studio Control app

The M-Audio Studio Control App gives you the power to shape your sound as you see fit. Access customizable presets and a 5-band EQ to tweak your output to match your room, and your preferences via the front panel Instant Listening Modes. Rear panel trim control lets you dial in your XLR and TRS analogue inputs to ensure you can integrate these monitors seamlessly into any studio setup.

Weight & dimensions

Product only

Weight (lbs): 22 lbs
Weight (kg): 10 kg
Imperial (in): 10" W x 11.5" D x 15" H
Metric (cm): 24.5 W x 29.2 D x 38.1 H

Product in box

Weight (lbs): 28.2 lbs
Weight (kg): 12.79 kg
Imperial (in): 16.4" W x 14.2" D x 19.9" H
Metric (cm): 41.66 W x 36.1 D x 50.55 H

In the box

Forty Eighty studio monitor 5FT (1.5M)
AC power Cable
Foam Isolation Pad
Quickstart Guide

Notes: Great value from M-Audio's compact monitors, designed for both studio and DJ use. 6.5-inch bass drivers offer powerful low frequency response, while Bluetooth streaming offers convenience for casual listening. Sold individually.

Supplier's Notes:
The Forty Series brings pristine audio to life with built-in DSP that provides precise crossover and customisable equalisation to deliver sound quality above and beyond the analogue filtering currently available in monitors at this price point.

M-Audio Forty Series: Experience your sound

Designed for every beat-maker, producer, DJ, mix engineer, content creator and party starter out there. The M-Audio Forty Series is a perfect choice for the new generation of creators.

For the producer hustle

Whether you're laying down heavy beats, tracking powerful lead guitar riffs, or crafting euphoric electronic adventures, the Forty Sixty and Forty Eighty monitors are clever production partners. Enjoy detailed and customisable sound that invites every element of your track to come to life. With these monitors, what you hear in your studio will sound outstanding in the club, on streaming platforms, and everywhere in between.

DJ Essentials

The Forty Series monitors are built to handle deep bass lines and crisp highs so you can keep track of your mix and deliver the smoothest transitions and fattest double drops with absolute precision. Whether you're practicing your set or throwing a party, your mix will sound tight and dynamic, giving you the confidence to push your mix to the max.

Precision sound engineering

Mix engineers are familiar with the importance of precision and clarity, and that's exactly where the Forty Series delivers. With professional-grade Burr-Brown analogue-to-digital conversion and DSP processing, you'll hear every detail of your mix. These monitors create a clean and accurate representation of your sound, so you can make informed decisions and craft mixes that translate perfectly from car systems to club systems.

The creator's workhorse

For content creators, consistent sound quality is everything. Whether you're producing a podcast, editing a video, or streaming, the Forty Series monitors deliver crystal-clear audio that ensures your content sounds professional. The precise DSP crossover helps you pick up every detail, ensuring your audience hears exactly what you intended.

Party with Bluetooth

Throwing a house party or just want to kick back and jam? The Forty Series allows you to do just that with Bluetooth 5.0 true wireless stereo (TWS) audio streaming. Simply connect any device and fill your space with rich sound. No cables, no hassle - just seamless and immersive sound that keeps the party going.

Instant listening modes

A lot of time and precision goes in to delivering a perfected final mixdown, but music is enjoyed outside of a perfectly treated acoustic room. To address this, M-Audio designed a simple front panel button that allows you to easily switch from a ruler-flat mix reference to HYPE mode that emulates a mix common in ear buds and car stereos. Beyond that, experiment with a custom mode where you can specifically define all parameters of your sound with the M-Audio Studio Control App.

Tailor your sound with the M-Audio Studio Control app

The M-Audio Studio Control App gives you the power to shape your sound as you see fit. Access customizable presets and a 5-band EQ to tweak your output to match your room, and your preferences via the front panel Instant Listening Modes. Rear panel trim control lets you dial in your XLR and TRS analogue inputs to ensure you can integrate these monitors seamlessly into any studio setup.

Product only

Weight (lbs): 15.8 lbs
Weight (kg): 7.2 kg
Imperial (in): 8.5" W x 8.6" D x 13.2" H
Metric (cm): 21.6 W x 21.8 D x 33.5 H

Product in box

Weight (lbs): 20 lbs
Weight (kg): 9.07 kg
Imperial (in): 13.5" W x 12.9" D x 18.75" H
Metric (cm): 34.29 W x 32.77 D x 47.63 H

In the box

Forty Sixty studio monitor
5FT (1.5M) AC power Cable
Foam Isolation Pad
Quickstart Guide

Notes: Solid Blaze Cabin Trolley

Introducing the first 4-wheel DJ trolley designed for ultimate convenience. The Solid Blaze Cabin Trolley allows DJs and music producers to easily navigate airports, train stations, and more while traveling to gigs. Safely transport essential gear like laptops, mixers, drum samplers, DAW controllers and 12"records with ease.

Made from recycled plastic bottles, this sustainable trolley also features interchangeable wear-and-tear components, including the trolley handle and wheels, for long-lasting performance.

Travel smart and eco-friendly with the new SOLID BLAZE CABIN-TROLLEY, perfectly sized to meet cabin luggage standards of most airlines.

Fits
Pioneer:
DJM-S11
DJM-S7
DJM-S9
DJM-900NXS/SRT
DJS-1000

Alpha Theta:
Euphonia

Ecler:
Warm 4

Akai:
APC 64
MPC Live 2
MPC One +
MPC2000XL
MPC 2000
MPC 2500
MPC 5000

Rane:
Seventy-Two
Seventy

Reloop:
Elite

Allen & Heath:
Xone PX5
Xone DB4
Xone DB2
Xone 92
Xone 62
Xone 43

Headliner LA:
Headliner R4
Headliner R2

Ableton:
Push 3
Push Move

Native Instruments:
Maschine MK3+
Kontrol X1MK3

50 x 12" records

Basics
Fabrics made from 120 0,5 l recycled PET plastic bottles - Global Recycling Standard certified
4 precision 360 (degree) PU spinning wheels (interchangeable)
Outer material crafted from robust and water-repellent RPET 900D Polyester with eco-friendly water-based PU-coating
Main compartment includes two removable dividers, meshpocket under the lid and an internal PVC rain cover
Lining made from RPET TC Polyester
Internal laptop compartment fits up to 13" or 15-17" laptops (stored upright)
Lockable dual PVC-coated YKKr AquaGuardr zippers
One large front pocket with magnetic flap including internal pouches and zippered pockets to organize smaller gear and personal belongings
Extra-sturdy 2-stage trolley handle (interchangeable)
Vertical and horizontal carrying-handles

Specs
Outer dimensions (H/B/T): 55 x 39 x 23 cm / 21.6 x 15.3 x 9 inch
Inner dimensions: 45 x 36 x 15 cm (main compartment) / 17.7 x 14.17 x 5.9

Weight:
4,3 kg / 9.47lbs
Colour: black

Notes: Solid Blaze Vinyl Trolley

Tailored for dedicated vinyl DJs, the new Solid Blaze Vinyl-Trolley offers the ideal solution for transporting up to 60 x 12" records with ease and style.

Whether moving from one gig to the next, this trolley ensures both practicality and flair. Crafted from recycled plastic bottles, this eco-conscious design offers interchangeable wear & tear parts, including a replaceable trolley handle and precision inliner wheels, ensure long-lasting performance.

The spacious side and front pockets provide extra storage for headphones, needles, 45s, and essentials, making it the ideal companion for every DJ on the move.

Fits
60 x 12" Records
20 x 7" records (in both side pockets)
15" laptop (front pocket)
Headphones
Needle case

Basics
Fabrics made from 120 0,5 l recycled PET plastic bottles - Global Recycling Standard certified
2 precision PU Inliner wheels (interchangeable)
Outer material crafted from robust and water-repellent RPET 900D Polyester with eco-friendly water-based PU-coating
Main compartment includes internal PVC rain cover
One large front pocket with magnetic flap and two side pockets
Lining made from RPET TC Polyester
Lockable dual PVC-coated YKKr AquaGuardr zippers
Strong carry handle and detachable shoulder-strap
Extra-sturdy 3-stage trolley handle (interchangeable)

Specs

Outer dimensions (H/B/T):: 44 x 42 x 28 cm
Inner dimensions:: 32 x 33 x 20 cm (main compartment)
Weight: 4,5 kg / 9,9 lbs
Colour: black

Notes: Control Vinyl:

Traktor timecode Control Vinyl comes in a range of colours - pick your favourite and get mixing. Choose from black, purple, blue, red, transparent orange, or transparent neon pink.

Tactile control:

DVS and Control Vinyl are ideal for anyone who wants the feel of a traditional system combined with the power of a digital workflow. And it's easy to switch inputs if you want to play vinyl or CDs alongside your digital tracks.

Your own hardware:

Keep the flow and controls of the hardware you already use. Traktor DVS means you can retain your existing setup, including turntables or CD decks that aren't supported with direct Traktor integration.

Ready to go:

Traktor Pro 4 DVS ensures all mixers with an integrated audio interface and phono input can now work with Control Vinyl straight out of the box. There's no need for extra wires, interfaces, or a soundcard. Just grab your decks, plug in Traktor, and go.

Notes: Control Vinyl:

Traktor timecode Control Vinyl comes in a range of colours - pick your favourite and get mixing. Choose from black, purple, blue, red, transparent orange, or transparent neon pink.

Tactile control:

DVS and Control Vinyl are ideal for anyone who wants the feel of a traditional system combined with the power of a digital workflow. And it's easy to switch inputs if you want to play vinyl or CDs alongside your digital tracks.

Your own hardware:

Keep the flow and controls of the hardware you already use. Traktor DVS means you can retain your existing setup, including turntables or CD decks that aren't supported with direct Traktor integration.

Ready to go:

Traktor Pro 4 DVS ensures all mixers with an integrated audio interface and phono input can now work with Control Vinyl straight out of the box. There's no need for extra wires, interfaces, or a soundcard. Just grab your decks, plug in Traktor, and go.

Notes: Control Vinyl:

Traktor timecode Control Vinyl comes in a range of colours - pick your favourite and get mixing. Choose from black, purple, blue, red, transparent orange, or transparent neon pink.

Tactile control:

DVS and Control Vinyl are ideal for anyone who wants the feel of a traditional system combined with the power of a digital workflow. And it's easy to switch inputs if you want to play vinyl or CDs alongside your digital tracks.

Your own hardware:

Keep the flow and controls of the hardware you already use. Traktor DVS means you can retain your existing setup, including turntables or CD decks that aren't supported with direct Traktor integration.

Ready to go:

Traktor Pro 4 DVS ensures all mixers with an integrated audio interface and phono input can now work with Control Vinyl straight out of the box. There's no need for extra wires, interfaces, or a soundcard. Just grab your decks, plug in Traktor, and go.

Notes: ***B-STOCK: Box damaged & missing software otherwise in perfect working order***


Control Vinyl:

Traktor timecode Control Vinyl comes in a range of colours - pick your favourite and get mixing. Choose from black, purple, blue, red, transparent orange, or transparent neon pink.

Tactile control:

DVS and Control Vinyl are ideal for anyone who wants the feel of a traditional system combined with the power of a digital workflow. And it's easy to switch inputs if you want to play vinyl or CDs alongside your digital tracks.

Your own hardware:

Keep the flow and controls of the hardware you already use. Traktor DVS means you can retain your existing setup, including turntables or CD decks that aren't supported with direct Traktor integration.

Ready to go:

Traktor Pro 4 DVS ensures all mixers with an integrated audio interface and phono input can now work with Control Vinyl straight out of the box. There's no need for extra wires, interfaces, or a soundcard. Just grab your decks, plug in Traktor, and go.

Notes: Control Vinyl:

Traktor timecode Control Vinyl comes in a range of colours - pick your favourite and get mixing. Choose from black, purple, blue, red, transparent orange, or transparent neon pink.

Tactile control:

DVS and Control Vinyl are ideal for anyone who wants the feel of a traditional system combined with the power of a digital workflow. And it's easy to switch inputs if you want to play vinyl or CDs alongside your digital tracks.

Your own hardware:

Keep the flow and controls of the hardware you already use. Traktor DVS means you can retain your existing setup, including turntables or CD decks that aren't supported with direct Traktor integration.

Ready to go:

Traktor Pro 4 DVS ensures all mixers with an integrated audio interface and phono input can now work with Control Vinyl straight out of the box. There's no need for extra wires, interfaces, or a soundcard. Just grab your decks, plug in Traktor, and go.

Notes: Control Vinyl:

Traktor timecode Control Vinyl comes in a range of colours - pick your favourite and get mixing. Choose from black, purple, blue, red, transparent orange, or transparent neon pink.

Tactile control:

DVS and Control Vinyl are ideal for anyone who wants the feel of a traditional system combined with the power of a digital workflow. And it's easy to switch inputs if you want to play vinyl or CDs alongside your digital tracks.

Your own hardware:

Keep the flow and controls of the hardware you already use. Traktor DVS means you can retain your existing setup, including turntables or CD decks that aren't supported with direct Traktor integration.

Ready to go:

Traktor Pro 4 DVS ensures all mixers with an integrated audio interface and phono input can now work with Control Vinyl straight out of the box. There's no need for extra wires, interfaces, or a soundcard. Just grab your decks, plug in Traktor, and go.

Notes: Control Vinyl:

Traktor timecode Control Vinyl comes in a range of colours - pick your favourite and get mixing. Choose from black, purple, blue, red, transparent orange, or transparent neon pink.

Tactile control:

DVS and Control Vinyl are ideal for anyone who wants the feel of a traditional system combined with the power of a digital workflow. And it's easy to switch inputs if you want to play vinyl or CDs alongside your digital tracks.

Your own hardware:

Keep the flow and controls of the hardware you already use. Traktor DVS means you can retain your existing setup, including turntables or CD decks that aren't supported with direct Traktor integration.

Ready to go:

Traktor Pro 4 DVS ensures all mixers with an integrated audio interface and phono input can now work with Control Vinyl straight out of the box. There's no need for extra wires, interfaces, or a soundcard. Just grab your decks, plug in Traktor, and go.

Notes: ***B-STOCK: Box opened, product in perfect working order***


Third-generation version of the go-to Traktor controller for most serious DJs. Motorised jog wheels, colour displays and all the goodies you'd expect from a pro option.

Supplier's notes:
TRAKTOR KONTROL S4 lets you connect with your tracks in entirely new ways: Not only do its motorized jog wheels spin and react to nudging, scratching, pitch-fading, and backspins, they transmit cue points, loop markers, and more direct to your fingertips. And with RGB LED rings and high-res colour displays keeping all the info you need front and centre in the booth, everything you need is right where you need it - so you're free to focus on your mix.

Haptic drive - the jog wheel, reinvented:

Haptic Drive gives you a new kind of feedback on touch-sensitive, motorized jog wheels. Change the torque and start/stop times to suit any DJ style - whether you're a laid-back beatmatcher or backspin aficionado. Get closer to your music in three modes - Turntable Mode, Jog Mode, and Beatgrid Adjust Mode.

Three modes - mix with more:

Spinning jog wheels in Turntable Mode let you nudge and scratch like you would with vinyl. Or use classic Jog Mode for spin-to-nudge response. Because you feel loops and cue points as you scroll past them, you can line up tracks in a second and let your fingers do the mixing. Beatgrid Adjust Mode lets you adjust the track's Beatgrid on the fly, so you're always in sync.

RGB light rings - your sound, surrounded:

RGB light rings around each jog wheel deliver quick, responsive tempo and nudging visualization on each deck. DJs using four decks can stay on-track with jog wheel color-coding, and track-end warnings make sure you're never caught out.

New mixer FX - your one-touch secret weapon:

Easy to use and instant - Mixer FX give you control over club-grade filters, delays, gates, reverbs, and more. They're great for big transitions, or to accentuate and control the nuances and ambience of your set - depending on the dancefloor. Use them either on their own, or in combination with the usual TRAKTOR Deck FX for fun ways to shift your sound.

Colour displays - all hands on deck:

Create quick and evolving mixes with everything you need in one place. Each high-resolution display shows track, key, tempo, looping, Hotcue, and waveform information. Control Stems and samples directly with dedicated controls, and access powerful software tools at your fingertips.

Hard to break - carbon protect faders:

Upside-down carbon strips in our revised fader design mean better protection from liquids, dust, and other substances, because they no longer fall onto the conductive carbon surface. It's a simple trick that makes a big difference to their durability - especially in a world of DJ-booth drinks and packed-out dancefloors.

All you need - expanded connectivity:

The TRAKTOR KONTROL S4 is equipped with an integrated, club-grade 24-bit / 96-kHz audio interface, with external input options on every channel. Connect turntables for crate-diggers, drum machines and synths for hybrid wizards, or anything else you can think of to push the boundaries of your mix. When connected to TRAKTOR PRO 3, the software adds headroom to the signal, before TRAKTOR KONTROL S4 gives it an analogue boost - meaning better sound at club levels.

Traktor Pro 3 - crafted to perform:

Audio engine improvements and a redesigned user interface make TRAKTOR PRO 3 the best-sounding and most powerful version yet. Dig into extensive re-editing and mixing possibilities with loops, Hotcues, Flux Mode, samples, beat-syncing, and the industry's largest FX suite - for easy experimentation and soundscape creation.

Notes: ***B-STOCK: Box damaged, shows signs of use, no software included***


Experience a new way to mix and perform with Traktor Kontrol S8 - a 4 channel stand-alone mixer, professional audio interface, and enhanced performance decks for ultimate control over the included Traktor Scratch Pro software. Touch-sensitive controls and high-res displays deliver DJ workflow that is truly cutting-edge.

Get physical with the music. Touch-sensitive knobs, faders, and LED-guided touch strips bring Traktor software to life on vivid full-color displays, keeping you focused on performance - not on your laptop. The S8's touch-and-see workflow means you connect with your music - and with your crowd.

Two high-res colour displays put Traktor software in plain sight. Browsing, track info, effect, and filter values come into view directly in front of you. Keep an eye on the running track's ultra-crisp vector waveform. Or access Remix Decks in full view.

Create your signature sound with responsive Remix Deck controls. Intuitively mix in sounds with 4+4 channel Remix Deck faders. Plus, live capture and trigger your own samples and loops using 16 color-coded performance pads.

Your style. Your sound. This is enhanced DJ performance.

Connect anything your setup needs - Traktor Kontrol S8 boasts the most expansive connectivity on a DJ controller yet. The on-board 4-channel mixer features unique wear-resistant faders that offer unprecedented durability.

Plus, Traktor Mode buttons on every mixer channel switch between Traktor and stand-alone mode - ideal for handing the night over to the next DJ.

Traktor Kontrol S8 is built for seamless control of the included Traktor Scratch Pro 2* - the choice DJ software of countless professionals worldwide. Get in-depth control of your music with up to four software decks, customizable interface, timecode media, and advanced track library management.

Notes: NI's mixer controller gets a major update, including high-quality audio interface, stems control and exceptional visual feedback. Full Traktor Pro 4 licence included, making this compact controller incredible value for beginners and experienced DJs alike.

Supplier's Notes:
Traktor Z1 MK2 is an ultra-compact mixer controller and soundcard, for hands-on control of Traktor software across up to four decks. Z1 is ideal for newer DJs who want to lock in the fundamentals with room to grow. But it's equally suited to established users looking for a compact and flexible setup for performance in different settings - with the option to add more modular controllers.

Compact But Powerful
Throw it in your bag and take it with you anywhere. Z1 MK2 lets you get hands-on with Traktor Pro 4 without the need for any extra gear, thanks to the integrated audio interface.

Simplicity
Z1 MK2 focuses on all the fundamentals you need for a creative and dynamic mix. There's a pair of channel volume sliders and a crossfader, plus dedicated 3-band EQ controls, a pre-listen section, and mixer effect controls.

Room To Grow
Traktor's modular gear gives you room to grow your setup as you develop your skills. Looking to take things to the next level? Then add additional modular controllers like X1 or F1, depending on your needs.

An internet connection and a graphics card that supports OpenGL 2.1 or higher are required to download and activate the Traktor software. Once installed and activated, all products can be used offline.

Included software: Traktor Pro 4

Notes: ***B-STOCK: Product with some signs of usage but in perfect working order***


Solid 7" aluminium-frame lockable record box with 50 capacity, EVA lining and hinged lid.

Notes: Weight matters! Improve the stability of the vinyl records. 45 rpm adapter is made of high-quality stainless steel with precision milled on a CNC machine. Feature rubber O-ring around the adapter and it sits above the vinyl to clamp the vinyl down in place.

This adapter center is much heavier than the standard aluminum or plastic equivalent. Weighing 147g. These 45s adapters are among the heaviest available in the market.

The shape was designed and inspired by a spray can. Dual usage: works as an adapter and vinyl weight/clamp. O-ring can be remove to slide vinyl records easily and quickly during an audition or DJ set.

Precise hand-painted, nonfunctional nozzle top cap is made out of resin.

Specifications:

Weight: 147g
Height: 32.5mm
Diameter: 38mm with O-ring: 40.6mm
Material: Stainless steel
Packaging bag: Velour with logo print

The price stated is for one adapter

Designed and dreamed in Singapore, for your listening pleasure.

Notes: Weight matters! Improve the stability of the vinyl records. 45 rpm adapter is made of high-quality stainless steel with precision milled on a CNC machine. Feature rubber O-ring around the adapter and it sits above the vinyl to clamp the vinyl down in place.

This adapter center is much heavier than the standard aluminum or plastic equivalent.

Dual usage: works as an adapter and vinyl weight/clamp.

O-ring can be remove, the shape was designed to slide vinyl records easily and quickly during an audition or DJ set.

Specifications:

Weight: 118g
Height: 22mm
Diameter: 38mm with O-ring: 40.6mm
Material: Stainless steel
Packaging bag: Velour with logo print

Designed and dreamed in Singapore, for your listening pleasure