Studio Equipment charts

Notes: The Keeley Compressor is the most popular boutique compressor in the world.

The Keeley Compressor Plus is the first true advancement in Keeley's 2 and 4 knob compressor line. The new features are simple and straight forward. Now, there is a simple Release Switch that is tuned for single coils or humbuckers. No more wondering if you have the attack or release set right. Your humbuckers will have all the attack and punch that they should. The Tone Control was also added, which emphasizes the most sensitive harmonics that can be lost in compression. The Compressor Plus now sports a Blend Control that retains the peaks in your playing and, more importantly, the proper phasing of your guitar signal. The Keeley Compressor Plus offers the same gorgeous push of frequencies and sweetening of tone that the old comps gave you, now with the flexibility to easily handle any instrument.

The Keeley Compressor Plus is a compressor with an expander/sustainer. Not only does it act as a regular compressor, limiting the peaks in your playing, it adds more and more gain as notes fade out. Now you have sustain. Nothing worse than a note or a bend that has died before its time. The Keeley Compressor Plus adds just the right amount of sustain and expressive bloom to your notes.

The new Release Switch on the Keeley Compressor Plus is designed to make it very easy to transition between single coil and humbucker guitars. Humbuckers have more average energy than single coils which can cause compressors to stay in "compression mode" for a lot longer. When this happens, any series of notes you play will sound dull. With the quick release of the new Compressor Plus, your humbuckers remain true sounding, and each note retains dynamic attack and definition.

The Tone Control is Keeley's own design taken from analog delays and other vintage effects. Those effects used an emphasis circuit to recover treble and highs after they went through the BBD or other analog delay lines. That circuit was then taken and made it into a full fledged tone controll- it is the perfect way to gently add back in those highs lost in the compression process.

The Blend Control is a way of getting the peaks to come through while having sustain at the same time. So if you want sustain more than peak-limiting, this style of Manhattan Compression is for you! Keep all the peaks and transients with the Blend and Tone Controls while adding sustain on the back end. Heaven!

This compressor isn't just for heavy funk or chicken pickin' anymore.The new Compressor Plus is for players wanting a smooth, subtle wash from their guitar. Remove just the right amount of peaks for an ambient layer and then blend in the right amount of treble for a nice shimmer to your guitar. Use with your favorite fuzz to create a wall of tone like you've only heard on records. Looping has never been easier than with this compressor. Consider it an essential tool when creating loops that sound well-balanced. Forget it all and use the Compressor Plus for the best amp boost you've heard. Nothing pushes an amp better than the Keeley Compressor Plus.

Notes: Transform your electric guitar into a sitar!

Very few instruments offer as much harmonic and dynamic flexibility as a sitar. Electro-Harmonix has streamlined the essence of the sitar into a compact enclosure that offers a polyphonic lead voice and tuneable sympathetic string drones that dynamically react to your playing. With the EHX Ravish Sitar Emulator, you can create your own custom scales for the sympathetic strings while you set the decay time for the lead voice.

Two expression pedal inputs allow you to bend the pitch of the lead voice and control the volume of the sympathetic strings simultaneously. These unique controls offer the player the ability to program the Ravish to become a totally unique and organic instrument unto itself.

The Ravish is a truly new design with the flexibility to be a crossover tonal wonder.

Download free Ravish settings

Transform your electric guitar into a sitar
Lead sitar voice tracks your notes polyphonically with a wide range of tonal possibilities
Selectable decay speed for the Lead voice
Sympathetic string drone simulation with a wide tonal range
Selectable keys and scales including major, minor and exotic provided for the Sympathetic strings
Power adapter included

Specifications

Circuit: Digital
Bypass: Buffered Bypass
Audio: Mono
Power Supply: 9.6VDC-200mA power adapter included
Dimensions (in): 5.75 x 4.75 x 2.5
Current Draw: 160mA
Year Released: 2011

Notes: The Whammy Ricochet lets you bounce your playing up or down in pitch in controlled or crazy shifts. A momentary switch and customizable independent rise and fall time ballistics, allow you to get the Whammy action you know and love without the use of a treadle. Just hold your foot on the footswitch and let the Ricochet do the rest. Seven pitch selections - 2nd, 4th, 5th, 7th, Octave, Double Octave, and Octave+Dry, as well as a toggle to select up or down for the selected pitch. The Whammy Ricochet also has latching footswitch mode so you can rise or fall to pitch and stay there, and an LED ladder that shows your shift trajectory at all times. All these controls combine to create classic Whammy pitch-shifting as well as new sounds never heard before.

General Specifications
ControlsBallistics Control, Pitch Control, Range Switch, Momentary Switch, Effect On/Off
Sample Rate44.1 kHz in classic mode, 22 kHz in chords mode
Frequency Response20 Hz-16 kHz (classic mode), 20 Hz-11 kHz (chords mode)
Signal to Noise Ratio> -106dB (A weighted); ref = max level, 22 kHz bandwidth
A/D/A Converter24-bit
THD0.004% @ 1 kHz; ref = 1 dBu w/ unity gain
Power Consumption2.1 Watts (235 mA typical @ 9 VDC)
Power Requirements9 VDC External Adapter (sold separately)
Power SupplyPS0913DC-01 (US, JA, EU); PS0913DC-02 (AU, UK)
Power Adapter Output9 VDC 1.3 A
Dimensions
Length4.75"
Width2.875"
Height1.75"
Weight0.8 lbs.
Audio Output
Output1/4" Unbalanced (Tip-Sleeve)
Max Output Level+10 dBu
Output Impedance1 kO (Effect enabled or effect bypassed w/ Momentary switch on) True Bypass (Effect bypassed w/ Momentary switch off)
Audio Input
Input1/4" Unbalanced (Tip-Sleeve)
Max Input Level+5 dBu
Input Impedance1 MO (Effect enabled or effect bypassed w/ Momentary switch on) True Bypass (Effect bypassed w/ Momentary switch off)

Notes: Serious stereo reverb action in a compact pedal format. Studio-quality Spring, Hall, Plate, BFR, Refract and Air modes with customisable parameters and MIDI control.

Supplier's Notes:
Walrus Audio MAKO R1 is an extremely powerful and versatile multi-function stereo reverb that can quickly go from small intimate room sounds to massive washes of experimental euphoria with six customized, studio-quality programs - Spring, Hall, Plate, BFR, RFRCT (Refract), and Air. Every program can be tuned and tweaked and then saved to one of nine on-board presets.

The R1 boasts a volume swell effect that can be applied to any program, sustain and latching momentary features, stereo in and out, MIDI control, and up to nine on-board presets (128 via MIDI). Players of all styles and genres will be able to find eternal inspiration with the R1.

Programs

Spring - The Spring program emulates an excited spring reverb commonly found in tube amps with loads of transducing drip. Easily go from subtle to full-on surf rock. Experiment with the decay knob to get more than average amounts of reverb not found in traditional amp spring reverb tanks.

X knob adds a warm grit to the reverb decay.

Hall - The Hall program provides the acoustics of large live sound spaces like concert halls to arenas. Longer decays and higher X knob settings result in a massive wash of ambiance. Shorter decay and lower X settings allow for a more intimate reverb expression.

X knob controls the room's size; smaller at lower settings to larger room sizes as you increase X.

Plate - The Plate program emulates a smooth analog plate reverb with nice even diffusion inspired by famous plates like the EMT 140.

X knob adds in gentle warm grit to the front end of the program simulating driving a hot signal into the plate.

BFR - This is more than a giant arena reverb. It's a hall-esque reverb with rich and lush decay in a vast cavern filled with choirs of angels.

X knob controls the amount of diffusion applied to the multi-tap delays used to form the program. At lower X settings, you'll hear these delays bouncing around for a more textured sound. As you increase the X knob, the delays are diffused, creating a smooth texture, and lifting your riffs and chords into the atmosphere. See ya.

RFRCT (Refract) - The RFRCT program allows for lovely, charming, and glitch-like textures hovering over a largely diffused reverb. The Rate controls on RFRCT change how often the glitch effects occur while Depth controls the overall volume of the glitch effect.

X knob is used to shape the tone of the glitch effect. At zero, the glitch effect will have a lo-fi, almost tape-like sound to them. Increasing the X knob brightens these elements with more pristine details.

Air - The Air program offers a larger diffused reverb with a subtle shimmer but has a more "crisp" clarity to its decay. Explore slow-building sounds that don't get in the way of your playing. Air complements keys and synths as well.

X knob controls the amount of the wind and shimmer elements in the Air program. At zero the effect will be off. Turning clockwise will increase the volume of the air effect.

Presets
The R1 can save up to nine on-board presets, and up to 128 are accessible via MIDI. On-board presets are accessible with the bank switch. Cycle between presets in each bank by pressing Bypass and tap at the same time. You will see the right LED change from Red to Green to Blue. Any adjustments made in a preset will change the tap LED to purple, indicating you have edited the preset. The R1 employs a powerful reverb engine that allows for the true preset spill over. When you switch presets, the new preset loads, and the previous preset is allowed to decay naturally.

Tune
Use the Tune knob to shape the amount of low and high frequencies in the reverb signal. The X position is unique to program-specific features listed above.

Tweak
Each program can be fully customized to your taste and playing style with the Tweak knob.
Rate: Controls the rate of the LFO applied to the wet reverb signal.
Depth: Controls the Depth of the LFO applied to the reverb signal.
Pre Delay: Controls how long it takes after you play for the reverb to become audible.

Bypass Modes
The R1 has three different bypass modes.
True Bypass
DSP+True Bypass (trails)
DSP Bypass (trails)

Momentary Functions
Press and hold the SUS/LATCH (Sustain/Latch) switch to momentarily sustain the current reverb and continue to play over it through the same reverb algorithm. No dry signal here! Clicking the SUS/LATCH switch lets you latch the present reverb decay while you play over it.

6 Unique Reverbs
Spring
Hall
Plate
BFR
Refract
Air

Notes: When you add drive, dirt or other sound manipulation devices to your signal, the trade-off is always noise. So, many players turn to noise gates to help tame these unwanted nasties. Unlike many noise gates on the market, the PYLON ATB Noise Gate seeks to not only drive back the hordes of fizz and hum, but also arms and reinforces your tonal attack, shutting down the noise and yet helping you enjoy your rig's true potential.

This advanced, multi-functional and super-versatile pedal not only features an ultra-fast Gate with a smooth trigger, an integrated Boost section, an External Trigger Input for external bypass switching or Gate-triggering, a relay-based Channel Switcher for your amp but also sports a built-in Audio Transformer to help enhance and balance your rig. Hear and feel the quiet in the eye of the storm!

"Deep within the solitude of the temple, the Sau's of the Per-Ankh assembled in silence. Their conclusion was self-evident. Only those pure of tone could be received in the temple and find sonic peace. From the centre of their silent circle, the Orb swelled and raised above the Pylons. Erupting in a rain of light and spewing forth daggers of lightning, their new God subdued and separated the chaotic ocean of noise from the perfect breeze of stillness. Peace reigned once more, the hordes of cacophony overcome."

When talking about signal gain, we all know drive circuits at full tilt can be noisy malice monsters. To help get a grip on your noise floor, PYLON's NOISE GATE is based on a high-performance Blackmerr VCA and provides lightning-fast and precise performance. To find the right spot, simply choose between one of the two detection-range settings and dial in the THRESHOLD to taste. With either softly decaying notes using HIGH mode or a fast-closing response in LOW mode, you're sure to be able to dial in super tight tones when you need it, but without interfering with your sonic signature. Fast palm-mutes? No problem. Decaying notes? Dead simple to accomplish and just so you know when it is operating, the white status LED will also turn blue as soon as the gate starts to act.

Providing up to 30 dB of gain, the integrated BOOST circuit can really help to fine tune your tone, but it can also serve as an attenuator too. Its CUT control will tighten up your low end and is selectable between 65-730 Hz to ensure a mid-focussed and cutting lead sound when pushing your amp's preamp into saturation. Choosing between three different modes for the boost's on/off state, gives you plenty of options on how you want to use it. Either leave it ON to always help shape your tone, OFF if you don't need it, or use SYNC mode so it is activated with the GATE. Both CUT & BOOST knobs are backlit, in order to show you the on/off status of the BOOST section at a glance.

Using transformers in pro-audio gear is nothing new, but while they help to easily match the impedance of low-level and unbalanced signals such as from guitar or bass instruments, PYLON's audio-grade-transformer also gives additional warmth with associated nice low-frequency harmonics. Your guitars, synths or in fact anything you put through the pedal will never have sounded so solid. The pedal gives more 'heft' and enhances the core tone, in a much finer way and without any of the phase issues that can happen when using EQ alone!

However, when the output transformer is boosted even further in level, it can overload many amplifier or pre-amp inputs and make things appear muddy, especially with high levels of additional gain. So, to help tame superfluous low end (especially for rhythm chugging and soloing), KMA Machines added a fixed built-in roll off that affects everything below 65 Hz when the internal BOOST section is activated.

Powered by an optional standard 9V DC (max.) PSU (negative center, 2.1mm, >160mA current draw)

Notes: Shortwave

(Lo-fi Radio and Wire Recorder Emulation)

Inspired by espionage devices used during World War II and the Cold War, Shortwave transforms audio into clandestine operations of the past; Russian number stations, mysterious sounds transmitted by radio, and eerie sounds stored on early portable recorders.

Choose between 2 types of noise and interference, and control it with the Exposure parameter. Velocity and Focus control the amount of pitch stabilization. Shortwave will add an interesting emotional response and atmosphere to dry, simple sounds, or destroy a signal like no other fuzz pedal can.

Hand-wired in Seattle, Washington. Shortwave operates on a standard "Boss" style 9vdc power supply, not included. True bypass switching. Includes a limited lifetime warranty, if registered within 30 days of purchase.

Enclosure size: 4.77" x 2.6" x 1.39"

Notes: A typically unique take on multi-effects from Soma, designed to induce meditative states. Hybrid analogue-digital delay/reverb/granular processing gives a range of creative approaches.

Supplier's Notes:
COSMOS is a drifting memory station designed to work with meditative states through music. The design of the controls, functions and generated soundscapes are intended to evoke, in both performer and listener, states and experiences inherent in meditation, such as limitless space, fluidity, spontaneous development, presence, the ability to hear, tranquility, the experience of subtle harmony and happiness enveloping the whole world.

From a functional point of view, COSMOS is a large array of sound memory, in which recorded sounds undergo constant recombinations, spontaneously generating an ever-changing soundscape. This is achieved in three ways - by a mathematical shift based on the relationships between large prime numbers (the size of all delay lines are different primes), an asynchronous operation of the LFO, and modulation with a slowly changing chaotic signal. As a result, it allows the endless layering and processing of various sounds, as in a looper, but without an intrusive, repetitive loop.

COSMOS generates rich, fluid and evolving soundscapes perfect for ambient music. Using COSMOS, you can play an entire meditative solo concert while being in a spontaneous flow and without using studio-prepared sequences, backing tracks and other things that can't be a reflection of the "here and now".

Specifications

Minimum input voltage: 0.35 V peak-to-peak
Maximum output voltage at line outputs: 11.3 V peak-to-peak
The maximum output voltage at the headphones output: 10.4 V peak-to-peak
Frequency response: 10-22000 Hz
Sound memory: 44.7 sec
Supply voltage: 12 V *
Power connector polarity: centre plus
Current consumption: 0.25 A
Dimensions: 342 x 153 x 68 mm
Weight: 2.2 kg

* Use only the power supply supplied with the device! In case of failure, it can be replaced with a high-quality modern switched-mode power supply with an output voltage of DC 12 volts, the center is plus and an output current of at least 0.5 amperes (more is fine). The power supply must have a wide AC input voltage range of 100-240 volts. Such power supplies have excellent output voltage stabilization required for the device. It is forbidden to use COSMOS with nonstabilized voltage from transformer power supplies. It can lead to damage to the device, which is not covered by the warranty repair!

Notes: Limited-edition reissue of EarthQuaker's excellent Disaster Transport, lightly updated for 2023. Modulated delay now with reduced noise floor, analogue-style filtering and switchable modulation modes.

Supplier's Notes:
Disaster Transport

Legacy Reissue

The Original Delay Modulation Machine

Limited to 3,500 units worldwide. Behold! The newest incarnation of one of Earthquaker Devices' most beloved pedals ever, the Disaster Transport. For those of you well versed in the pedal's celebrated history, you might notice some differences on this beautifully sparkly box. A new Mod Mode switch allows you to bend or stretch the modulation wave. The new Mod Speed switch offers three rates of modulation, from bizarrely animated gradual climbs and steep drop offs to rapid chorus and intense vibrato.

The delay line has been redesigned to reduce the noise floor and improve the quality of the delay. Plus, it's now filtered to sound more like an analogue delay than any of the previous versions. With knobs to control the Speed, Intensity, Mix, Repeats, and Time; this analogue-voiced digital delay sits perfectly in the background with an evolved ambiance, but can also be dialled in for the dramatic effect of your choosing.

EQD initially set out to recreate the original Disaster Transport pedal in its earliest form, but the OG of EQD, Jamie Stillman, couldn't resist tinkering and improving the whole thing, so you just got upgraded, my friend. In doing so, EQD redesigned the delay line to reduce the noise floor and improve the quality of the delay. The output was boosted with a cleaner mixing section; it's now filtered to sound more like an analogue delay than any of the previous versions.

EQD added a Mod Mode switch that allows you to choose between bending and stretching the modulation wave. The Bend setting offers a subtler vibe closer to a traditional chorus sound, while the new Stretch option gives you loads of pitch-stretching modulation to run wild with.

The other difference you probably spotted with your eagle eye is the Mod Speed three-position toggle switch. The Slow setting is excruciatingly slow and can produce bizarrely animated gradual climbs and steep drop offs. The Fast setting can go from a rapid chorus to an intense vibrato, while the Medium setting is the most traditional rate similar to the classic Memory Man circuit with a nice range to it.

The newly designed enclosure features knobs to control the Speed, Intensity, Mix, Repeats, and Time, with Modulate and Activate switches, making this a highly customizable pedal to get the delay sound of your dreams. Thanks to the ramp modulation circuitry, you can turn the delay time down and start to use feedback and modulation at a higher setting to harness a bizarre modulator and achieve subtle to wild chorus-type effects. Or set your delay time how you want to set it and use your modulation rates to set your tempo, so you can strum or pluck to the climbs and drop offs to match your riffs. The possibilities are endless.

Controls

1. Speed: Controls the speed of the modulation. The Speed operates in three ranges (Slow/Fast/Medium) selected by the Mod Speed toggle switch. The Disaster Transport uses a Ramp wave for the modulation. You'll find this to be much more intense than most modulated delays. Think of it as a traditional Triangle wave that falls off a cliff in mid-cycle, creating a drastic pitch bend in its wake. Or don't and just think about whatever you want.

2. Intensity: Controls how much the LFO modulates the delay time. More subtle chorus type effects are achieved with less intensity and more intensity will yield wild pitch stretching and bending. The overall modulation style can be made more or less subtle by using the Mod Mode toggle switch to select Bend or Stretch.

3. Mix: Sets the volume level for the delay signal. Hear more of what you just played 30-600ms ago by turning this up.

4. Repeats: Controls the intensity of delay feedback from no repeats at zero to self-oscillation at max. Let the past pile up on you until it implodes.

5. Time: Sets the delay time from around 30ms at zero to 600ms at max. Everyone needs more time; you are offered about 600ms worth.

6. Mod Speed: Three position toggle switch that sets the range in which the Speed operates.

7. Mod Mode: Two position toggle switch to choose the modulation style. Bend is more of a traditional chorus type modulation and Stretch is a wilder pitch stretching modulation.

8. Modulate: This foot-operated switch features Flexi-Switchr Technology and turns the modulation on and off.

9. Activate: This foot-operated switch features Flexi-Switchr Technology and turns the effect on and off.

Tech Specs

Dimensions: 3.65 x 4.65 x 2.25 in. (93 x 118 x 57 mm) with knobs
Current Draw: 35 mA
Input Impedance: 1 MO
Output Impedance: 1 kO

Flexi-Switch Technology

This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Power

This device takes a standard 9 volt DC power supply with a 2.1mm negative centre barrel. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise.

*** Do not run at higher voltages! ***

Notes: Music's best octave pedal in a powerhouse pico package!

EHX's smallest and most powerful compact Polyphonic Octave Generator yet. The Pico POG takes the streamlined simplicity of the Micro and Nano POGs and fits it all into an ultra-compact chassis and adds a powerful tone control. The tightest octave effect now fits on the tightest of pedalboards.

The EHX Pico POG features a lighting fast feel that will track every note and chord you play with precision. Dial in Sub Octave to add stumble rumble or monstrous thunder. Add Octave Up for ethereal air or max it out to shred into another galaxy. Perfectly blend 3-voice tones for fat synthy madness. The 3 mode Tone control lets you tailor your sound to fit into any pocket no matter how massive or small.

Controls on the Pico POG include dedicated volumes knobs for the SUB OCTAVE, OCTAVE UP, and DRY voices. These three controls act as a mixer for infinite possible voice mixes. The TONE knob features three modes controlled by the FILTER button. In Tone Mode, the knob acts as a tilt-EQ with a flat frequency response in the center, more treble and less bass as you turn the knob clockwise, and less treble and more bass as you turn the knob counterclockwise. In this mode, the EQ is applied to all 3 voices. In Low Pass Filter mode, the knob cuts highs in the Sub and Octave Up voices, while High Pass Filter mode cuts lows in the Sub and Octave Up Voices.

Lightning-fast tracking with perfectly precise octave tones

3 volume knobs control level of SUB OCTAVE, OCTAVE UP, and DRY tones

TONE knob with 3 filter modes

Tone Mode applied tilt-EQ to all output

Low Pass Mode applies a resonant low pass filter, which allows low frequencies to pass while cutting higher frequencies of the Sub and Octave Up voices

High Pass Mode applies a high pass filter, which allows high frequencies to pass while cutting lower frequencies of the Sub and Octave Up voices

Power adapter included

Specifications

Circuit: Digital
Bypass: Buffered Bypass
Audio: Mono
Power Supply: 9.6VDC-200mA power adapter included
Dimensions (in): 3.65 x 2.0 x 2.0
Current Draw: 100mA
Year Released: 2023

Notes: Celebrating the classic, shimmering flanger sounds of Andy Summers, the EHX Walking on the Moon is a tribute to the tones Andy employed while carving his niche in the early days of playing with the Police. Liquid flange effects that hint toward chorus with extra depth and nuance make Andy's sound one of the most coveted in all of the guitar universe.

"This beautiful shimmering which sort of made the sound more bigger and more glamourous - became a sort of characteristic of my guitar sound - A big part of my guitar sound at that time in The Police was the flange sound which we have here today in this great new pedal." - Andy Summers

The Andy Summers Walking on the Moon is an analogue flanger with a simple but powerful control set of RATE, RANGE, and COLOR. RATE sets the speed of modulation which ranges from slow, smooth filter sweeps to jittering vibrato. RANGE controls how narrow or wide the effect sweeps into the bass frequency range. The COLOR control effects the intensity of the flanger effect from subtle chorusing effects to classic jet woosh sounds. These three controls interact to create a wide breath of modulation effects.

Additionally, the Walking on the Moon includes a FILTER MATRIX which disengages the LFO from the flanger circuit, freezing the flanger giving a fixed filter effect, which can add chime or metallic overtones to your sound without the movement of a traditional modulation pedal. A DRY output allows you to split your dry signal from the effected signal.

Special Artist Edition graphics featuring Andy's signature adorn the chassis and a tribute Walking on the Moon poster with art by Laura Josephson is included with each pedal.

Analogue Flanger / Filter Matrix sounds of Andy Summers
RATE sets modulation speed
RANGE adjusts lower limit of flanger sweep
COLOR controls intensity of flanger effect
Dedicated DRY output
Special Artist Edition Graphics
Includes Walking on the Moon poster design by Laura Josephson
True Bypass
9V Power Supply included (optional 9V battery not included)

Specifications
Circuit: Analogue
Bypass: True Bypass
Audio: Mono
Power Supply: 9.6VDC-200mA power adapter included (optional 9V battery not included)
Dimensions (in): 4.75 x 4 x 2.25
Current Draw: 40mA
Year Released: 2023

Notes: The TRIO+ is a simple-to-use guitar pedal that listens to the way you play and automatically generates bass and drum parts that match your song. Just plug your guitar into the TRIO+, press the Band footswitch to teach the TRIO+ your chords and rhythm, then press the Band footswitch again to start playing with your own personal band! Bass and drum levels can be adjusted for the perfect mix using the TRIO+'s Bass and Drums knobs. The TRIO+ also features a Simple Bass button lets you select between 3 bass line modes for busy or simple bass lines. Pushing the Band Creator™ paradigm further, the TRIO+ also allows you to loop and custom sequence your looped guitar parts to create full songs on the fly. Press the TRIO+'s Looper footswitch to record a loop along with an unlimited number of overdubs. The Loop level can be individually controlled using the TRIO+'s Loop knob. Loops can be recorded by themselves, operating just like a traditional looper, or along with the band. You can also apply built-in effects to your guitar signal by enabling the TRIO+'s Guitar FX button, or connect your favorite effects to the TRIO+'s FX Send and FX Return jacks. The TRIO+ provides 12 music genres to choose from including Blues, R&B, Rock, Alternative Rock, Metal, Pop, Electronic Pop, Hip-Hop, Country, Folk, Latin, and Jazz. 12 song styles are available for each genre and can be selected using the TRIO+'s Style encoder, including selection between 3/4 and 4/4 time signatures. Multi-colored LEDs around the TRIO+'s Style encoder indicate which styles best match your song. The TRIO+ can learn up to 5 different song parts, perfect for creating an intro, verse, chorus, bridge and outro. Song parts can be recalled on-the-fly as the song plays back or pre-programmed as a sequence for automated playback. An optional DigiTech FS3X Footswitch can be connected to the TRIO+'s Control In jack for additional handsfree control with 3 modes of operation to select from. Up to 12 songs along with loops can be stored to the TRIO+'s Micro SD Card (included). Need to create more songs? No problem. Just insert a new SD Card and you're ready to start teaching the band your new songs. To manage all your songs and loops on a computer, download the free Librarian Manager software from digitech.com, available for Windowsr and Macr. The TRIO+ offers independent Tempo, Genre, Style, Loop Level, Bass Level, Drums Level, Headphone Output Level controls; Guitar, FX Return and Control Inputs; Amplifier, Mixer, FX Send and Headphone Outputs; Built-in Guitar Effects (relative to music genre); a Soft Click Footswitch and includes a 9V DC adapter.

General Specifications
ControlsTempo, Genre, Style, Loop, Bass, Drums, Headphone Volume
Backlit ButtonsGuitar FX, Seq, Part 1-5, Alt Time, Song, Simple Bass
FootswitchesLooper, Band
LEDsGenre types, Style 1-12, Audiolastic, Looper, Band
JacksPower, Control In, Guitar In, FX Return, FX Send, Amp Out, Mixer Out, Headphone
OtherMini USB port, microSD card slot
Bit Depth24-bit
Sample Rate44.1 kHz
Signal-To-Noise Ratio110dB, A-weighted
Maximum Recording Time230 seconds per song part i based on a minimum 50 BPM and 48 bars per part
USB TypeMini-B
SD Card TypemicroSDHC, Class 10
SD Min/Max Storage Size8 GB/32 GB
Power Requirements9 VDC external power adapter
Power Consumption7.2 W
Current Draw800 mA
Dimensions
Length5.4"
Width4.25"
Height2.5"
Weight1.46 lbs.
Audio Output
Amp Output TypeUnbalanced, 1/4" TS
Amp Output Impedance1 kO
Mixer Output TypeUnbalanced, 1/4" TS
Mixer Output Impedance1 kO
FX Send Output TypeUnbalanced, 1/4" TS
FX Send Impedance1 kO
Headphone Output Type1/8" (3.5 mm) Stereo Mini Jack
Headphone Output Impedance120 O
Audio Input
Guitar Input TypeUnbalanced, 1/4" TS
Guitar Input Impedance1 MO
FX Return Input TypeUnbalanced, 1/4" TS
FX Return Impedance1 MO
Control Input Type1/4" TRS (compatible with DigiTech FS3X)

Notes: The New Standard in Octave Pedals

Fusing classic BOSS octave tones with the latest tracking technologies, the BOSS OC-5 sets a new standard in octave pedal performance. Vintage mode provides a spot-on recreation of the legendary mono OC-2 from 1982, while Poly mode offers numerous enhancements for extended-range playing. And with the addition of an octave-up feature, a span of three octaves is now available for creative exploration. From fat, low mono sounds to octave-shifted chords and more, the OC-5 delivers the widest range, finest sound quality, and best playability in any octave stomp to date.

OC-5 Octave Sound Tryout

Get interactive with our custom TonePedia player and explore hundreds of sound variations. Select your instrument, tweak and choose pedal settings.

High-Octane Octave Performance

Powered by the latest real-time processing technologies from BOSS, the OC-5 provides exceptional sound and playability for the most expressive octave experience ever. A key feature is the newly developed tracking engine, which delivers clean, accurate performance with no latency. The OC-5 also offers wider range and greater polyphonic capabilities than previous OC models, covering all your octave needs in one high-performance pedal.

Classic Tones with Vintage Mode

Introduced in 1982, the OC-2 was the world's first modern octave pedal for guitar and bass. Still loved by players everywhere, the stomp's warm-yet-present tone sits perfectly in a mix, and its characteristic voice can be heard in many famous songs. The OC-5's Vintage mode brings you the OC-2's iconic mono sound, coupled with improved response thanks to the new tracking engine. Dedicated level controls are provided for -1 and -2 octave effects and the direct sound, giving you quick access to an endless variety of sub-octave colours.

Enhanced Poly Mode

The OC-5 also features an evolved version of the smart Poly mode first introduced with the OC-3 Super Octave, letting you play full chords with octave effects. The variable Range knob restricts the effect to the lower notes on your instrument, perfect for playing octave bass lines alongside normal chords and melodies in the higher registers. And with the new tracking refinements, it's even possible to isolate the octave effect to the bottom note in a chord-just turn the Range knob to the "Lowest" setting.

Extended Range with Octave Up

Another cool OC-5 enhancement is the new octave-up effect, which is available in both Vintage and Poly modes. Simply twist the dedicated +1 OCT knob to bring in the desired effect level. Use the octave-up effect on its own for faux 12-string sounds and unique solo tones, or blend it with the octave-down effects for extended chord voicings and super-fat leads.

Guitar/Bass Switch and Direct Out

The OC-5 lets you instantly optimize the performance of its tracking engine for either guitar or bass via a dedicated switch on the body of the pedal. And with the Direct Out jack, it's easy to route dry and effect sounds to different destinations, such as two stage amps or discrete channels on a mixer or audio interface.

Specifications

Nominal Input Level-20 dBu
Input Impedance: 1 M ohm
Nominal Output Level: -20 dBu
Output Impedance1 k ohm
Recommended Load Impedance: 10 k ohms or greater
Bypass: Buffered bypass
Controls:
Pedal switch, GUITAR/BASS switch, VINTAGE/POLY switch, DIRECT LEVEL knob, +1OCT knob, -1OCT knob, -2OCT/RANGE knob
Indicator: CHECK indicator (Serves also as battery check indicator)

Connectors:
INPUT jack: 1/4-inch phone type
OUTPUT jack: 1/4-inch phone type
DIRECT OUT jack: 1/4-inch phone type
DC IN jack

Power Supply: Alkaline battery (9 V, 6LR61 or 6LF22), AC adaptor (PSA series: sold separately)

Current Draw: 60 mA

Expected battery life under continuous use: Alkaline: Approx. 5 hours
*These figures will vary depending on the actual conditions of use.

Accessories: Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information")
Alkaline battery (9 V, 6LR61)
Options (sold separately) AC adaptor: PSA series

Size & weight

Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height: 59 mm / 2-3/8 inches
Weight (including battery): 440 g / 1 lb

Notes: Limited-edition Zanzibar blue version of Soma's unique memory station, combining looping effects with real-time performance options, allowing you to craft and perform soundscapes while manipulating live sound.

Supplier's Notes:
COSMOS is a drifting memory station designed to work with meditative states through music. The design of the controls, functions and generated soundscapes are intended to evoke, in both performer and listener, states and experiences inherent in meditation, such as limitless space, fluidity, spontaneous development, presence, the ability to hear, tranquility, the experience of subtle harmony and happiness enveloping the whole world.

From a functional point of view, COSMOS is a large array of sound memory, in which recorded sounds undergo constant recombinations, spontaneously generating an ever-changing soundscape. This is achieved in three ways - by a mathematical shift based on the relationships between large prime numbers (the size of all delay lines are different primes), an asynchronous operation of the LFO, and modulation with a slowly changing chaotic signal. As a result, it allows the endless layering and processing of various sounds, as in a looper, but without an intrusive, repetitive loop.

COSMOS generates rich, fluid and evolving soundscapes perfect for ambient music. Using COSMOS, you can play an entire meditative solo concert while being in a spontaneous flow and without using studio-prepared sequences, backing tracks and other things that can't be a reflection of the "here and now".

Specifications

Minimum input voltage: 0.35 V peak-to-peak
Maximum output voltage at line outputs: 11.3 V peak-to-peak
The maximum output voltage at the headphones output: 10.4 V peak-to-peak
Frequency response: 10-22000 Hz
Sound memory: 44.7 sec
Supply voltage: 12 V *
Power connector polarity: centre plus
Current consumption: 0.25 A
Dimensions: 342 x 153 x 68 mm
Weight: 2.2 kg

* Use only the power supply supplied with the device! In case of failure, it can be replaced with a high-quality modern switched-mode power supply with an output voltage of DC 12 volts, the center is plus and an output current of at least 0.5 amperes (more is fine). The power supply must have a wide AC input voltage range of 100-240 volts. Such power supplies have excellent output voltage stabilization required for the device. It is forbidden to use COSMOS with nonstabilized voltage from transformer power supplies. It can lead to damage to the device, which is not covered by the warranty repair!

Notes: Modulated digital reverb with an analogue dry signal path, the clock control lets you adjust the core frequency of the DSP, creating a smooth pitch shift in time, allowing you to create from a sharp traditional plate-like reverb to an underworld cavernous ambience.

Dedicated sustain footswitch to create an infinite modulated ambience, trails option to combine momentary activation and be able to add lush movement at any time.

Soft footswitch bypass latch & momentary
2 Modulation depths (off @ center position) MOD toggle
DSP clock control for deep cavernous textures
Trails toggle
2nd delay line with analog feedback
Pre-delay
Damp control
Infinite sustain footswitch
Top mounted jacks

Notes: Full featured stereo digital delay with an analogue dry signal path, carefully designed algorithms to cover all the delay needs in any genre, from pristine clear echoes and warm repetitions to trembling modulation.

The secondary footswitch options will let you manipulate the most important features while allowing you to play your instrument. Infinite repeats or insta-wobbles are at the tip of your toes.

6 complex delay algorithms: Digital, Analog, Tremelo Delay, Chorus Delay, Chorus +Tremelo, and Filtered Delay
Stereo TRS output (Tip mono)
Soft footswitch bypass latch & momentary.
Tap tempo/RAMP for infinite sustain or modulation via S R M toggle
True Bypass, Buffered or Trails via TB B TR toggle
Tempo divisions
Damp control
Modulation
EXT jack (Tap Tempo & RAMP)
Top mounted jacks

Notes: Pedal version of the excellent Golden Master module, featuring multi-band end-of-chain processing with EQ, compression and mid/side stereo widening effects. Ideal for bass or guitar.

Supplier's Notes:
On-stage mastering

Based on Endorphin.es' Golden Master eurorack module and our experience in electronic live music performances, Endorphin.es developed Golden Master - a multiband processor pedal to deliver high pressure audio for live concerts and venues: sound loud without overloading the master limiter.

Multiband processor consists of EQ, compressor and mid-side

24 bit 96 kHz audio I/O with 32 bit internal processing

Stereo enhancer for each of the 3 bands

High impedance inputs, pseudo-balanced outputs: works also as a DI-box on stage

One knob compressor per band along with global threshold allows you to intuitively achieve results

Dedicated expression pedal for master volume control

Two footswitches let you select presets and bypass with your feet

Notes: The Nano Pulsar takes tremolo beyond the ordinary and mundane. Equipped with a collection of tremolo-modulating waveforms and the option of operating in Triangle or Square Wave modes, the Nano Pulsar is a tremolo/panner treasure chest. In mono, it's simply amazing, or, connect it in stereo to create shifting waves of sound that surround you and fill your space with weaving, pulsating energy.

For all its power, the Nano Pulsar's layout is intuitive and using it is easy. There's often a perceived volume drop with tremolo when the effect is engaged so we've included a Volume control. It allows a player to fine-tune their output level when the effect is on, and is a very useful addition.

The Nano Pulsar's Depth knob adjusts the amount of tremolo applied to the signal. Past maximum (around 1 o'clock) the modulation becomes asymmetric and warps the audio signal between positive and negative phase. This creates a unique style of tremolo which sounds great alone or can be used in combination with other effects like the Oceans 11's Shimmer patch to produce compelling synth-like sounds and textures.

The Rate knob provides a full range of speed adjustments for the tremolo or pan effect, and when you start to max out the Rate and Depth controls you enter ring modulation territory for a surreal sonic joyride!

Unlock a world of advanced sound shaping and control. Create tremolo and panning effects that go from sublimely beautiful to downright shocking. The compact Nano Pulsar will be your do-it-all, go to pedal for all things tremolo and panning.

Specifications

Circuit: Analogue
Bypass: Buffered Bypass
Audio: Stereo Out
Power Supply: 9V battery included (optional 9.6VDC-200mA power adapter not included)
Dimensions (in): 4.5 x 2.75 x 2.1
Current Draw: 30mA

Notes: Full-range overdrive for a wide, sculptable tone!

The EHX Crayon Full-Range Overdrive is a versatile overdrive with independent Bass and Treble controls and an open frequency range that provides players with a musical alternative to customary mid-focused overdrive pedals. It delivers a range of sounds going from a suggestion of dirt to full-on distortion and is equally impressive all by itself or when driving another overdrive pedal.

Full-range overdrive with a lush, rich, warm tone
Independent Bass and Treble controls
True Bypass for maximum signal path integrity
Compact pedalboard-ready pedal
9V battery included

Specifications

Circuit: Analogue
Bypass: True Bypass
Audio: Mono
Power Supply:9V battery included (optional 9.6VDC-200mA power adapter not included)
Dimensions (in): 4.5 x 2.75 x 2.1
Current Draw: 10mA
Year Released: 2015

Notes: The Face The Fuzz is a modern take on a classic sound, modeled after the Dallas Arbiter Fuzz Face but with some important upgrades and modifications. Get the original Germanium PNP transistors for that classic tone just like the likes of Jimi Hendrix, Duane Allman, and George Harrison played!

What is the difference between Synthrotek's two fuzz pedals: Face the Fuzz and the Arbiter Fuzz Face Clone? The Arbiter Fuzz Face Clone uses the classic circuit that is known and loved by many, and everybody loves a classic. The Face the Fuzz pedal has been designed with a few key changes to make it more useful to the modern musician: a wider frequency response, the ability to daisy-chain the power with a 1 Spot, and the option to use temperature-stable Silicon transistors.

The Face The Fuzz comes with hand-tested and selected premium AC128 NOS PNP transistors. All of the AC128s for optimum gain and leakage current so that they are guaranteed to bias properly and sound great! Lower gain transistorshave been chosen for Q1 and higher for Q2 according to strict standards. Be assured that you will be playing a premium product that takes the guess work out of Germanium transistor testing.

Notes: Synthrotek's original Mean Screamer Pedal goes way beyond a typical tube screamer clone with a couple of great mods. An original 4558 OP-AMP IC has been used to give it that beautiful classic boost.

Notes: Excellent value from this uniquely versatile pedal. Load or record acoustic guitar impulse responses and apply them to your electric guitar, transforming the tone and sound.

Supplier's Notes:

The Optima Air pedal is a programmable digital modelling acoustic guitar simulator for electric players. Plug in your electric guitar and morph it into any of 15 internal acoustic guitar models at will. An Impulse Response (IR) loader enables you to capture the tone profile of your favourite acoustic guitar and store it as a model that can be played from your electric guitar. To enhance the acoustic tone, the Optima Air is furnished with a foot-switchable studio quality preamp with 3-band EQ and a digital reverb section to generate ambience. The Optima Air also has an audio streaming USB interface providing, which can be used as a recording device and the USB can be used for remote editing via software which is downloadable for PC or Mac computer. Inputs and outputs include standard jack in and out, a D.I. XLR output, send/return effects loop, headphone output and aux line input for a myriad of connection possibilities. Optima Air is the acoustic guitar in a pedal for electric players either on stage or in the studio.

Power supply: 9Vdc, 500mA, negative centre (not supplied)
Sampling format: 24-bit, 48-kHz
Internal programmes: 15 models, 9 preset patches
DI output: XLR
USB computer interface: Micro USB port

The box for this item contains :

Optima Air pedal

Notes: The Wash is a dream come true for ambient player and ushers in a new chapter in the world of delays. It accomplishes the arduous task of creating an organic, below-the-mix wash. Normally this requires stacking 3-4 reverb and delay pedals at the end of your chain. The unique "Wash Circuit" creates the perfect wash with only one pedal.

For the new version (V2), Hungry Robots worked hard to squeeze the circuit into a smaller enclosure while keeping the build quality and tone quality identical. The circuit that hundreds of users have fell in love with is unchanged. The new versions are 2 inches smaller left and right. In addition to the smaller enclosure, the new option for top mounted jacks can save you a lot of board space.

At its most basic utility, The Wash is an outstanding analog-voiced, tap-tempo delay with just over 1000ms of delay time.

The Wash circuit is what makes the pedal stand out from other delays on the market. The Wash circuit adds reverb to the signal and through a complicated network of internal feedback loops, subtle multi-head Binson effect, and what is known as "ripple effect," It works to add a hauntingly beautiful wash to your signal in ways that can't be accomplished by stacking a reverb and a delay in series. It does all of this while keeping the clarity and presence of your original signal without getting lost in the soup of decay.

The Wash reacts to your playing unlike the common DSP reverb/delays with an infinate sustain function. There is a dynamic quality to it that is hard to replicate with any other single pedal.

The "Ripple" knob controls The Ripple Effect. The Ripple Effect is a feature in which each successive delay trail slowly scatters and transforms into reverb. The "Resonance" knob is to fine-tune the resonance and decay of the wash. The Middle "The Wash" knob controls the mix/level of the wash.

Current Draw: 92-93 mA

Switching: True-Bypass

Dimensions: 4.7" x 3.7" x 1.96"

Powering: 9V DC - Negative Center - 2.1mm Barrel

Notes: The Moby Dick V2 brings up to date one of the first pedals that put Hungry Robot on the map. The original Moby Dick is well known for its chimey, tape-emulating delay line with slight lo-fi imperfections and subtle modulation; a "back-to-basics" delay in the world of multi-mode DSP delays.

The V2 has an obviously smaller footprint, but the most exciting changes lie in the circuit updates. When working on the V2, Hunry Robots wanted to further explore the sonic capabilities of the Moby Dick tape-emulation, rather than a miniature version of the pedal- specifically in a lo-fi, wrecked-tape context.

One of the magical qualities of recording to tape is the lovely saturation. The original Moby Dick had a gritty, saturated quality, but in the V2, this quality was pushed to its limit. A "Lo-Fi" knob which allows you to dial in additional tape saturation to the delay line. This is done by applying pre-gain amplification to the front end of the delay chip, resulting in a wonderfully organic character when gain is applied.

The capabilities of the modulation were also expanded. The original Moby Dick had a very subtle chorusing effect. Though it sounded great, it was admittedly subtle. The V2 increases the modulation depth dramatically, allowing it to travel beyond subtle chorusing into more extreme pitch bending territory. The "Mod" in conjunction with a cranked "Lo-Fi" knob creates the most amazing broken tape-deck quality, but when these knobs are dialed back it retains the overall character of the original.

Current Draw: 30 mA

Switching: True-Bypass

Dimensions: 4.7" x 2.6" x 1.5"

Delay Time: Approximately 1000ms

Powering: 9V DC - Negative Center - 2.1mm Barrel

Notes: The Acapulco Gold is a dirt-simple distortion Device modeled after the sound of a cranked vintage Model T amplifier, bringing the openness, clarity, and crunch that only a dimed tube amp can provide, at a fraction of the size, and without expensive maintenance costs!

Since tone is in the hands, the controls of the Acapulco Gold are as simple as possible. The footswitch turns the pedal on and off, and the giant knob controls the output volume. That's it. The rest is at your fingertips. Want less gain? Turn down your guitar's volume knob. Need a darker rhythm tone? Roll back your guitar's tone control. Easy, right?

Big Knob: The big knob sets the output level, sometimes known as Volume. PLEASE BE CAREFUL, the Acapulco Gold is extremely loud!

With your guitar's volume all the way up, the Acapulco Gold roars like a wide-open Model T on the verge of explosion. At just-barely-backed-off, the Gold becomes a raunchy overdrive. At minimum guitar volume settings, the Acapulco Gold delivers a hazy, Nashville-sounding spank to your tone.

How about this? If your guitar has separate volume and tone controls for each pickup and a three-way selector switch, this little one-knob banger becomes a three-channel tone monster at the flick of your wrist!

This device is true bypass and uses electronic relay-based switching. Audio will not pass without power.

This device can be powered by a 9v battery or a standard 9-volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise.

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs

Current Draw: 18 mA

Notes: You hear that EVP? It's the all new, extra spook-tacular, Ghost Echo calling out from beyond the void! The Ghost Echo is Earth Quaker's spooky take on the haunted amp-top spring reverberation units of yesteryear. This creepy analog/digital spring reverb emulation machine boasts a terrifying 30ms - 150ms of pre-delay, controllable via the Attack knob, for everything from a quick rockabilly slapback to viscous pools of ectoplasmic reverberations. When playing staccato, you'll hear the tortured trails of the reverb, resulting in more of a slapback or echo sound. Legato playing will reveal a massive ambient "depth" that fattens up the sound - and look out, it's right behind you!

Phew, that was close. The Dwell control sets the length and thickness of the decay, which is to say that it controls how long the disembodied spirits of notes no longer with us float through the ether. At the maximum setting it will descend into an infinite loop of self-oscillation. The Depth sets the intensity of the reverb, which you probably know as the wet/dry mix.

Controls:
1. Attack: Adjusts the length of the pre-delay, from 30ms at minimum to about 150ms at maximum. When the Dwell is set to self-oscillate, this will change the pitch of the oscillations.

2. Dwell: Adjusts the length of the decay. This will start to self oscillate around 3 O'clock, the pitch of the oscillations can be changed by turning the Attack control.

3. Depth: Mixes in the wet signal with the dry, unity is around noon and everything after is boosted.

Tech Specs:
This device is true bypass and uses electronic relay-based switching. Audio will not pass without power.

This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 86 mA
Input Impedance: 10 MO
Output Impedance: 1 kO

Notes: A multi-voice synthesizer that will track your guitar for tight monosynth leads, complex chord polyphony, or multi-note sequenced arpeggiation. All without any special pickup installation. Just put it on your board and discover your own reality. The Enzo isn't limited to guitar; use it on any instrument whether drum machine, vocals or other synths. Completely transform your input signal and synthesize. Use the full synth palette of multimode analog style synth filters, ring modulation, envelopes and much much more to drive punchy, thick synth textures. Or, explore an altered state of your pure instrument signal by transforming it with pitch, time and modulation effects. Plug in to a revelation generator.

Premium quality 24 bit A/D and D/A

32 Bit floating point DSP hardware

Premium low noise Analog signal path throughout

Digitally controlled Analog Dry path for wet/dry mix

Analog Devices JFET input circuitry

Selectable True Bypass (Relay) or Analog Buffered Bypass

Durable translucent coat of vibrant gold over brushed aluminum

Current draw < 150 mA

Dimensions - 4.25" wide, 4.5" long, 2" tall

Notes: Inspired by Vangelis' majestic soundtrack for the sci-fi masterpiece Blade Runner, Mercury7 is designed to send both humans and androids into an eternal dream state with its wealth of stunning reverb algorithms.

From subtle plates and huge cathedrals to massive building soundscapes, swirling modulation, epic auto-swells and cascading shimmering pads. Whether you're looking to capture the sound and feel of well-known earthly spaces, or that of huge starlit galaxies far away, the Mercury7 is sure to deliver!

Meris has left no stone unturned in their journey to bring ultra-advanced studio reverb capabilities to your pedalboard. The Mercury7 takes everything that made the original and highly regarded Mercury7 500-series studio rack-unit amazing and distils it all into a compact, sturdy and super intuitive pedal fit for any rig and instrument out there.

Mercury7 sports two different reverb algorithms (Ultraplate and Cathedra), which alone deliver a superb range of ambient tones. Now throw in the ability to modulate, pitch-shift, swell, sustain and EQ the reverb in a million different ways via its rich control set and ALT functions and you have a reverb pedal that has your back whether you're going for smooth on-stage ambience or otherworldly sound designs that could easily form the backdrop to your favourite movie.

In addition, Mercury7 holds one of the most impressive stereo reverb images ever made, vast MIDI capabilities and the ability to seamlessly morph between sounds via an external expression pedal. Mercury7 is in essence way more than just another reverb pedal. It's a deep and highly musical creative instrument in its own right.

Premium quality 24 bit A/D and D/A

32 Bit floating point DSP hardware

-115 dB Signal to Noise Ratio (typical)

Premium low noise Analog signal path throughout

Auto Swell Envelope (variable and foot-switchable)

Analog Devices JFET input circuitry

Wet/Dry signal mix occurs in the Analog domain

Selectable True Bypass (Relay) or Analog Buffered Bypass

Durable transparent blue powder coat over brushed aluminum

Current draw < 150 mA

Dimensions - 4.25" wide, 4.5" long, 2" tall

Notes: The Old Blood Noise Endeavors Expression Slider is a fader for use with any pedal that has an Old Blood style expression input (see details below). Simply use a TRS cable to plug the Expression Slider into the Expression input and use the slider as you would a knob or expression pedal. Suggested uses: strap it to your mic stand to adjust your favorite setting without bending down, keep it at your studio console to control a parameter while tracking, use the indicators to mark your favorite settings, or simply replace a knob control with a slider because let's face it: sliders are cool. Unsuggested uses: Unintended excess weight from use with foot while standing may cause damage to the device. Read: Don't use your foot.

Details: the Expression Slider uses a TRS jack with tip connected to the wiper of a 100K slider. Old Blood Noise confirmed that it works with all their other products, as well as pedals from Chase Bliss, Meris, Earthquaker Devices, Empress, Montreal Assembly, Strymon, EHX, and Boss. It will not work with TS style expression inputs such as Line6 without an additional TRS splitter cable.

Notes: Tweaking the platform of their Fault overdrive/distortion, Old Blood Noise have carved out room for greater gain range, voice control, and clipping options in the Fault Version 2. The Fault remains a great overdrive with footswitchable second gain stage and three band EQ, and now excels as a clean boost and tweakable high gain distortion as well.

Notes: Open up your signal routing options with this neat and simple pedal. Split one signal into three, run effects in parallel, mix three signals together, set up ABY routing or set levels. Versatile.

Supplier's Notes:
The Signal Blender provides a number of parallel routing solutions through its use of a pair of send/returns, primary input and output, switching, and volume control.

Signal Blender can be used as a:
Parallel effect blender
3-to-1 mixer
1-to-3 splitter
Active ABY in either direction
Volume level setter

and more.

A courtesy 9V power outlet and phase correction switches for both Sends add further versatility to this box. Clever switching allows for latching or momentary on/off action.

The Signal Blender uses standard 9V center negative power, and has a current draw of 31 mA.

Notes: Floating above your head, delicate and elusive yet dreamy and sweeping. Always in motion until it dissolves and merges with the all immersive atmosphere around it. Just close your eyes and let the KMA Audio Machines' Cirrus Delay and Reverb carry you across the open sky, onto its sonic cloudscapes.

Cirrus is KMA Audio Machines' first step into the fully digital realm. But KMA have come up with a special and versatile, dynamically modulated combined Delay and Reverb pedal that will forever change your perception of time and space.

Made up of a Delay side and a Reverb side, both sides of Cirrus sport the most important basic controls such as Time (up to 1.5 sec). Repeats for the Delay and Decay and Damp for the Reverb. Plus, each side has its own mix control as well. So far so good, but now it's time to jump down the sonic wormhole!

This little Spatial-Temporal Modifier gives you three different Delay AND Reverb modes, which all sport a special dynamic feature that is controlled by your picking attack. This enables you to create sounds that are certifiably out of this world! To set the sensitivity of how the sound reacts, every section has its own sensitivity control.

The different Delay and Reverb modes cover vastly different modulated areas.

Modulated Delay Mode (MOD) fluctuates the Delay signal for a dynamic dancing tape echo-inspired modulation that'll deliver everything from subtle sways, to crazy pitch-bends. The Sample & Hold Mode (S/H) adds a sequencer-like filter in front of the Delay line, perfect for synthy textures. Play softly for subtle filter action or hit it hard for more pronounced electro-vibes. The third Delay Mode (OCT) blends in a high octave as your notes decay for unique shimmery dimensions, shining through like tiny stars in the cloudy night sky.

Over to the Reverb section, Modulated Reverb Mode (MOD) will decorate your trails with silky smooth movement, whereas the two other Modes deliver either an opening Low-pass Filter (LP) or a closing High-pass Filter (HP). The harder you pick the more the Low-pass will open up and bring in those shimmering highs, as if you're opening and closing portals to far away galaxies simply through your playing. Contrary to that, the closing High-pass will cut your lower frequencies when picking harder which will create cool lo-f textures. However, the ambient party doesn't stop here!

A big part of creating a signature sound comes from your pedal order and we know that a lot of you like to get creative there. Well, the Cirrus obliges! Set the Order Toggle to "Reverb" to run the Delay into the Reverb or flip it to "Delay" to switch it the other way - either direction will give you worlds of inspired soundscapes. You even get another Toggle Switch to set the Delay Tap subdivision, so you can get the right rhythms rolling fast. Toggles are awesome!

Now, on to the footswitches - Tap-Tempo on the left (neat!) and the much-needed Bypass Switch on the right (classic!). But wait, we actually made these stompers cool - the humble Bypass and Tap-Tempo Switches are suddenly full of additional creative secrets!

Besides the standard latching mode, the Bypass Switch offers some cool, yet creative and simple to use options. When the pedal is off, you can engage the pedal momentarily by holding the Switch down for sudden bursts of ambience. When the pedal is on though, holding down the Switch maxes out the Decay, jumping you straight into infinite reverb wonderland. You can also hold down the Tap-Tempo Switch to max out the repeats for infinite echoes. Plus, you can even hold down BOTH at the same time to enter an endless cascading dream state!

The Cirrus has been equipped with an Expression Pedal input (standard TRS connection) and a Selector Switch, giving you complete hands-free control over whatever key parameter of Cirrus you want. In addition, an internal switch can turn the Reverb and Delay trails on or off to taste, plus the individual Reverb and Delay mix controls help to tailor your sound exactly as you see ft.

As the final piece of the tonal puzzle, a Serial FX-Loop was added, letting you put any pedal in front of the Delay/Reverb line, to further flavour your own signature sound.

Powered by an optional standard 9V DC (max.) PSU (negative center, 2.1mm, approx. 220mA current draw)

Every pedal is designed, assembled, silkscreened, tested and numbered by hand in our small workshop. We use external manufactured PCBs to guarantee our high quality standard and keep the price of our pedals reasonable. The use of an indestructible powdercoated die-cast enclosure ensures a maximum durability.

Notes: Amazingly versatile phaser business in this brilliantly designed pedal. Watch the demo video to hear the amazing range of sounds this one can do. Best phaser ever? Might just be.

Supplier's Notes:

Jump into spaceship Horizont and begin your trek into star- filled galaxies, all while discovering the incredible vastness of the sounds created by this inter-dimensional multi-spatial stereo analog JFET Phaser. The unexpected is waiting for you behind the far away horizon and it will be a journey you'll never forget!

The Horizont's mission is to push way beyond the classic phasing sounds of yesteryear, and take you to uncharted phaser worlds the second you plug in. By combining lush analog JFET phasing with digitally controlled dynamics, Horizont creates a vivid and expressive modulation experience, all while providing experimental and creative features that'll kick phasing well into the 21st century.

Besides the more common phaser controls, the Horizont offers a plethora of new and exciting options for all the interstellar tone chasers out there. To greatly broaden the range of phasing tones available, KMA implemented a digital LFO with no less than eight different waveforms: Ramp Up/Down, Sine/Triangle/Square wave, a sweeping waveform, Sample & Hold and a random slope waveform going from 20s down to 40ms.

The implemented envelope generator is one of Horizont's absolute key features. It transforms your input signal into a control source to modulate the speed of the digitally controlled LFO or lets you manually phase for a resonant touch wah- like sound, depending on the state of the SWP- and SPURTCONTROL-Switch.

Set the SPURTCONTROL switch to LFO to let the SPURT knob adjust the internal phasing speed. However, by flicking the switch to ENV (Envelope) mode, it allows you to dynamically modulate the speed along the full LFO speed range, based on how loud the input source is (e.g. when you attack the strings hard). You can also combine the SPURT knob and the envelope by flicking the toggle to LFO+ENV where SPURT then sets the minimum speed. For even more control, you can even plug in an external expression pedal/CV-source (0-5V) to alter the minimum speed on-the-fly or you can use the TAP TEMPO switch (tap just twice) to set the speed to fit in with the tempo of your music.

The EXP-Mode switch also lets you choose between a manual phasing mode, controlled by an expression-pedal or an external CV source. Setting the EXP-Mode switch to the middle position will disable any external expression control.
The SWP (Sweep) switch lets you decide to use either the LFO or the envelope of your instrument signal to control the phasing.

The envelope can be set to upwards or downwards operation via the ENV switch, seeing the LFO either slowing down or speeding up, or flipping the orientation when phasing manually from lows to highs and vice versa. In conjunction with the FUEL (Sensitivity) and the DECAY controls, the envelope can be tailored perfectly to your needs.

The EMPH (Emphasis) mode from the original Astrospurt Phaser was kept, but have reworked and refined it extensively for the Horizont. The four toggle-switches determine the stage in which the phase-shifted signal is fed back into itself, while the REG (Regeneration) control sets the feedback amount. We also smoothed out the overall sound of the EMPH mode for a more pronounced, and crisp vocal-like tone. Each of the different switch variations and turn of the REG control will yield different results, seeing you discover new wild, fuzzy and noisy galaxies as you travel deeper down this sonic wormhole.

In order for you to levitate through spacetime, a stereo output has been added to the Horizont. You can switch between a standard stereo output or a panning output, via the STEREOPAN switch. Synchronized with the LFO speed, the upper cycle of the LFO sends the signal to the OUT1 and the bottom cycle to the OUT2. This is without a shadow of a doubt the most liquid and astonishing phasing experience you'll ever embark upon. But wait, there's more! Stop and take a deep breath, set the MIX control to fully clean and the Horizont is transformed into a Tremolo on-the-spot, with all the other aforementioned features.

Last but by no means least, the Horizont was equipped with an FX-Loop right in front of the phase-shifting line. This enables you to add your own secret sonic weapons to this spaceship, seeing you create your very own unique phasing sounds.The pedals' headroom was also increased drastically by boosting the internal circuit voltage to 18V, from the regular 9V input, to give the cleanest phasing possible no matter what instrument or line source you use.

Notes: All the reverb and analogue-style delay you could wish for in a single pedal thanks to this killer all-rounder. Separate foot switches for reverb and delay on/off, with optional true bypass or 'trails' setting.

Supplier notes:
The Caverns Delay Reverb V2 dual-effect pedal combines delay and reverb for the perfect end to any pedal board. It features Keeley's analog-style tape delay with modulation options. The 650ms of warm delay combine with Spring, Shimmer or Modulated Reverb. Caverns now comes with a True-Bypass or Trails option. Because of its small and compact design, the New Caverns is a perfect fit for any fly-rig or small board where you have tight space requirements. The New V2 features Keeley's most popular time-based effects, blended perfectly via a design fine-tuned for over 2 years. Simply put, it will be an amazing addition to any board.

The Reverb side of the pedal features 3 cavernous sounds:

Spring Mode - Blackface Amp style spring reverb with F Style Tremolo
Modulation Mode - Choral modulation to the reverb for a huge, cavernous space
Shimmer Mode - Reverb with emphasis on octave-up voices in the reverb trails

The Delay side of the pedal incorporates Keeley's popular Magnetic Echo circuit, which is designed to emulate analog tape delay lines. Three way switchable modulation gives you options for adding Wow and Flutter to the repeats. Perfectly voiced echoes sit well in the mix, either clean or with distortion.

The New Caverns Delay Reverb V2 builds on the old Caverns pedal by giving players a more open and logical control layout with more space between the foot switches.

Top-Mounted Jacks allow for a compact pedalboard layout.

True-Bypass or Trails option gives you the freedom to create huge caverns of sounds and lets them ring out even after you turn the pedal off. Our buffers are engineered to retain your tone and to feed your amplifier a full-strength signal.

The New Caverns Delay Reverb V2 is entirely built in the US. Keeley's veteran crew builds the most reliable and road-worthy gear.

Use 2 TRS Breakout cables for effects patching or to use the Caverns with a pro switching system.

Notes: When you pair the Footswitch+ with the BeatBuddy or BeatBuddy MINI it gives you even more control over the beat. Right out of the box you get the ability to trigger accent hits, pause/unpause the beat, and navigate songs, genre, and tempo. However, when used with the BeatBuddy, you can do even more with the Footswitch+ like setting it to act as the main pedal.

But, it doesn't stop there! The Footswitch+ is hands down the best multipurpose 2 button footswitch on the market. It's built like a tank, is more comfortable than a footswitch has any right to be, and offers quiet, momentary switches.

Notes: Well on its way to becoming a cult favourite already, Empress's Zoia brings modular synthesis to a compact pedal format. Create effects, synths, controllers or modules to integrate with other instruments.

Supplier's Notes:

The ZOIA is basically a modular synthesizer in pedal form. Instead of being a delay effect or tremolo, the ZOIA provides the modules necessary to build a delay or tremolo from the ground up. But since you're the one building it, you can make it do whatever you want. With the ZOIA you can build your own custom effects, synthesizers, midi controllers, and virtual pedal boards. And to make life a little easier, these modules have been created for all your standard guitar effects. So for instance, if you want a phaser, you can just plop down a phaser. You don't have to break out the textbooks to learn that they're built out of all-pass filters. (Of course, if you're a nerd like us, you can use the ZOIA to build them out of all-pass filters).

Input Impedance: >= 1M ohms
Output Impedance: 100 ohms
Frequency Response (-3dB): 10Hz - 23.4kHz
Total Harmonic Distortion: 0.22%
Dynamic Range: 105.5 dBA
Input Headroom (no pad): +0.5 dBu
Input Headroom (6dB pad): +5.7 dBu
Input Headroom (12dB pad): +10.8 dBu
Output Headroom: +16.2dBu
Power Input Connector: 2.1mm Barrel Connector
Power Input Voltage: 9V DC (center negative)
Required Current: 300mA
Height (enclosure only): 1.75"
Height (including controls): 2.625"
Length: 5.7"
Width: 3.75"
Weight: 1.5lbs

Notes: The Archer Ikon is sort of a 2 in one guitar pedal. It can be used as just a clean boost by turning the gain all the way down. As you introduce gain it will attenuate the clean signal but there is a magical blend in between that you will find. Please experiment!!

Dimensions: 4.00" x 2.30"

9 volt Negative tip adaptor and a 5.5mm x 2.1mm jack.

9 volt Battery

Buffered Switching

Notes: While the OD808 may have been the first overdrive circuit of its kind, it was the OD-9 that cemented this sound in the history of Rock & Roll guitar.

Looking at the OD-9's circuit, you'll realize that this is not some redesign being cleverly marketed as a reissue - this is THE original OD-9 (TS-9) circuit, yet with the addition of true bypass switching. Even the PC board is the same one that Maxon's been using for the past 30+ years, complete with empty slots where parts for the FET switching circuit have been left out!

Like the original, the current production OD-9 features the NJM (JRC) 4558D Op Amp - an essential component for authentic "TS" tone. The NJM is smoother sounding and less compressed than other Op Amps, offering superior sound quality with low noise.

The absence of the FET switching circuit gives the OD-9 some added output and a slightly more open sound than the OD808, making it perfect for the classic rock tones that it helped to define.

If your future plans include a meteoric rise to rock & roll stardom, then rely on the legendary tones of the OD-9 to fuel your ascent.

The OD-9 is a true-to-spec reissue of the legendary 1980's OD-9/TS-9 circuit, with the addition of true bypass switching for clean, uncolored tone when bypassed.

TECH TALK:

Input is fed into a 2SC1815 emitter/follower transistor to optimize the signal's impedance structure. From here it's on to the first section of an NJM 4558D Op Amp - NJM is the company formerly known as the Japan Radio Corporation (JRC) - the legendary manufacturer that designed and built tons of these components in the late 70's/early 80's.

In this non-inverting Op Amp there are diodes in the feedback loop that clip the signal gradually as well as a High-Pass filter that keeps low frequencies from being distorted as much as high frequencies - the classic "808" configuration that creates the tone we all know and love.

After this is a passive LP filter and then an active tone stage that uses the other half of the Op Amp to create a HP filter that brings back frequencies cut by the inter-stage LP filter. After the tone stage it's through the volume pot, another E/F 2SC1815 to provide a low impedance output and then the true bypass switch.

The OD-9 features Mechanical True Bypass switching via a Fujisoku 4PDT switch - input signal is sent to ground when bypassed.

Input Impedance: 500K Ohms

Input Jack: 1/4 inch standard phone jack

Output Impedance: 10K Ohms or less

Output Jack: 1/4 inch standard phone jack

Outputs: 1

Equivalent Input Noise: -114 dB or less (input shorted IHF-A weighted)

Maximum Output Level: 0 dBm

Maximum Gain: +40 dB (at 1.5 KHz)

Controls: Drive, Tone, Level

Switch: Normal/Effect (true bypass configuration)

Power Supply: 9V Manganese dry cell battery (6F22) or special AC adaptor

Power Voltage: DC9 V (Battery) / DC10 V (AC-adaptor)

Current Consumption: 6 mA (9 V) / 7 mA (10 V)

Dimensions (whole): 74 mm (W) x 124 mm (D) x 54 mm (H)

Weight: 580 g

Accessories: 9V Manganese dry cell battery (S-006P) x 1

Warranty Card: x 1

User's Manual: x 1

Notes: The EHX 1440 Stereo Looper is a compact powerhouse that provides 1440 seconds of high-quality, uncompressed, stereo recording time plus the ability to store 20 different loops. It can even tempo sync to an external MIDI device and is packed with features you'll want. Unlimited overdubbing means you can lay down as many parts as you like while variable tempo playback plus Reverse and Octave speed effects really enhance creative control.

A 1 Shot function is also included, adjustable fadeout times and optional external footswitch control for selecting loops and Undo/Redo. The affordable 1440 Stereo Looper puts a ton of looping power on your pedalboard.

Notes: The MOD REX is a kinetic tour-de-force that lets you weave compelling, shifting, musical tapestries. Whether you are a guitarist, synthesist or electronic musician you will find it inspires your creativity and stretches your musical boundaries.

Four independent modulation sections:

The heart of the pedal is its four, independent modulation sections synced in time, they are:

MOD features great sounding EHX Vibrato, Flanger, Chorus or Phaser. The Depth knob lets you set the amount of the effect while Feedback controls the resonance of the Flanger and Phaser.

TREM delivers tremolo, an effect that modulates the volume of your signal. The Depth control sets tremolo intensity.

PAN modulates between left and right in stereo operation. In mono operation the PAN section acts as another tremolo section, but with the wave shapes all inverted!

FILTER offers a choice of a modulated LPF, HPF or BPF. In LPF (low pass filter) frequencies above a modulated cut-off point are cut. In HPF (high pass filter) frequencies below a modulated cut-off point are cut, and in BPF (band pass filter) frequencies above and below a modulated centre point are cut.

Each section also features a choice of four LFO shape options: rising sawtooth, triangle, falling sawtooth or square wave. They affect the way the modulation transitions and provide advanced creative control over the specific section as well as the way they interact with each other.

Tempo control that's flexible and powerful:

The MOD REX delivers virtually limitless polyrhythmic possibilities.

Its TEMPO component gives you nine note-length choices for each of the four modulation sections. They are independently selectable in increments starting at a whole note and ranging thru subdivisions that go up to a 16th note. In addition, any of the sections can be bypassed.

The MOD REX's tempo (displayed as beats per minute or BPM) is adjustable with the Tempo knob, Tap Tempo footswitch or by using an expression pedal into its EXP input. It can also be synced to an external device with MIDI Clock or an external pulse clock.

MIDI and the MOD REX:

The pedal's robust MIDI implementation enables you to sync devices quickly and easily as well as automate functions and changes so they occur precisely when and where you want them whether you are working at home, in a studio or live.

The MOD REX accepts MIDI to enable it to tempo sync the modulation rate with an external device, to recall presets via MIDI Program Change messages and to control any parameter on the MOD REX via Control Change messages.

Extras:

The MOD REX lets you save and recall up to 100 presets. It comes from the factory with 20 great programs.

The pedal features full stereo input and output.

An external foot controller input makes banking up and down thru presets quick and easy.

Notes: With 11 reverb types and a ton of "hidden" functionality, the Electro-Harmonix Oceans 11 reverb pedal could be your new go-to reverb pedal. You can tap into classic tones like hall, plate, and spring reverbs, including a brand-new spring reverb algorithm that sounds gloriously complex and rich - you can even double-tap the footswitch to "crash" the spring reverb. And you'll be able to cover a huge range of modern tones with a variety of modulated reverbs, shimmer reverb, reverse reverb, and more. A mode switch offers access to variations on many of the 11 reverb types. Complete with an infinite reverb mode for freeze-style effects, there is vast creative potential in the Electro-Harmonix Oceans 11 reverb pedal.

Reverb types:

Hall - rich and full sound of a grand concert hall
Spring - brand-new tube spring reverb emulation
Plate - lush and warm plate reverb
Reverse - each note fades in backwards
Echo - recirculates echoes through the plate reverb algorithm
Trem - hall reverb plus tremolo
Mod - modulated reverb
Dyna - swells, gates, and ducks in response to your playing dynamics
Auto-Inf - auto-infinite reverb, triggers a wash of reverb with each new note or strum
Shim - shimmer reverb with an octave-shifted wash that blooms behind your core tone
Poly - polyphonic reverb with two pitch shifts operating on your pre-reverb guitar tone

Notes: The MOOER GROOVE LOOP brings together both the MICRO LOOPER and MICRO DRUMMER into one micro pedal, for the ultimate in a portable jamming companion. Both elements can be used independently from one and other or simultaneously.

When used simultaneously the looper will be automatically synchronised to keep in time with the selected drum groove, and an intro click will be played when recording the first loop to ensure you're in time with the groove.

The tap tempo button makes adjusting the groove speed very easy and independent playback level controls for both the Drums and the Looper ensure GROOVE LOOP is a breeze to dial in and adjust on the fly.

Notes: The EHX 5MM Guitar Power Amplifier is a pocket-sized power amp that’s a great alternative to a traditional guitar amplifier. It’s super portable and perfect in playing situations where a high-powered amp is not required… like when you’re mic’d on stage, in the studio or as a backup. It produces 2.5 watts so one of the cool things about it is that it doesn’t take much to start getting some nice drive and saturation. Plus, it can be connected directly to any 8 O – 16 O speaker cabinet.

The 5MM is complete simplicity. It features a Volume control and a Bright switch which, when engaged, adds presence to the signal. Since it is a power amp, a preamp, overdrive pedal and, or an EQ in front of it will really let you dial in your tone, but it can be used by itself. The 5MM Power Amplifier also comes equipped with its own power supply.

Notes: The polyphonic BASS9 Bass Machine transforms a guitar into nine different basses and requires no special pickups, MIDI or instrument modifications. It relies on the same technology powering all EHX 9 Series pedals, like the award winning MEL9r Tape Replay Machine, but features a new algorithm maximized for transposing one to two octaves down with superior dynamics and tracking.

A rotary switch allows the user to select the sound of their choice, as follows:
PRECISION: Pays homage to the iconic Fender P Bassr
LONGHORN: Emulates the Danelectror 6-string bass, ideal for baritone type tones
FRETLESS: Features both electric and standup fretless basses.
SYNTH: A tribute to the classic Taurusr Synthesizer
VIRTUAL: Lets the user adjust the bass's body density and neck length for a variety of bass sounds
BOWED: Classic bowed bass
SPLIT BASS: Makes it possible for the guitarist to play bass on the lower strings (all notes below F#3) and chords or melody with the higher strings.
3:03: A polyphonic salute to the sought after Roland TB-303r vintage bass synth
FLIP-FLOP: Inspired by EHX's Octave Multiplexer, it provides a '70s style logic driven sub-octave generator that tracks without glitches.

The pedal is equipped with independent Effect and Dry volume controls so guitarists can precisely tune their mix at the Effects output jack, plus an always-active Dry output jack that outputs the input signal at unity gain.

Controls 1 and 2 have been designed to adjust specific parameters for each of the nine programs. For example, in PRECISION, CTRL 1 controls the sub-octaves while CTRL 2 imitates the original instrument's tone control.

Note: All third party trademarks referenced by EHX remain the property of their respective owners. Unless specifically identified as such, EHX's use of third party trademarks does not indicate any relationship, sponsorship, or endorsement between it and the owners of these trademarks. Any references by EHX to third party trademarks is to identify the corresponding third party goods and/or services and shall be considered nominative fair use under the trademark law.

Pays homage to nine of the best bass sounds ever
Tracks impeccably and works on guitar without mods, special pickups or MIDI implementation
Independent Effect and Dry volume knobs let you precisely control your mix at the Effects output
Controls 1 and 2 have been designed to adjust specific parameters for each of the nine programs
Dry output jack outputs the input signal at unity gain
Compact, rugged, easy to use
Power adapter included

SPECIFICATIONS
Circuit
Digital
Bypass
Selectable Buffered Bypass
Audio
Mono
Power Supply
9.6VDC-200mA power adapter included
Dimensions (in)
4.75 x 4 x 2.25
Current Draw
100mA
Year Released
2019

Notes: The Mod 11 is packed with 11 different modulation effects that range from classic to exotic plus advanced functionality all in a compact pedal. It gives you access to powerful yet intuitive "hidden" parameters accessible through its Secondary Knob Mode which let you take even greater control over its effects.

The Mod 11's modulation effects are:

1. TREM: Tremolo modulates your signal's volume. Selectable modes allow your playing envelope to control modulation rate or depth.
2. HARM: Harmonic tremolo. The signal is split into high and low frequency bands and modulated between the two. Selectable modes allow your playing envelope to control modulation rate or depth.
3. VIBR: Vibrato modulates your instrument's pitch. Selectable modes allow your playing envelope to control modulation rate or depth.
4. UNI: pays homage to the classic Univiber. Includes "Chorus" and "Vibrato" modes plus added overdrive
5. CHORUS: Warbling, doubling, chorus effect like the EHX Small Clone. Extra modes include tri-chorus and bass chorus effects
6. ROTARY: Rotary speaker cabinet simulation. Extra functionality includes overdrive plus envelope control over rotation speed
7. FLANGE: Flanging with modes for both additive and subtractive flanger. Multiple LFO shapes, including envelope follower
8. TZF: Through Zero Flanger. A flanger effect that crosses through the "zero point" of the sweep where the modulated delayed signal meets back with the dry signal. Modes for both additive and subtractive flanger, plus barber-pole flanger
9. PHASE: Choose from 4, 6, or 8 stage phaser. Multiple LFO shapes including envelope follower
10. PITCH: Modulated pitch shifter. Select your main pitch shift and modulate around it. Extra functionality includes a dry blend and stepped pitch modes
11. FILT: Modulated filter effects like those on classic analogue synths. Low Pass, High Pass and Band Pass. Multiple LFO shapes available including a Q-Tron style envelope follower

The Mod 11's Momentary Mode lets you seamlessly switch in and out of effects mode for quick accents. It also features Tap Tempo controllable via the built-in footswitch or an external one. The Mod 11 is modulation with warp drive!
11 modulation types with multiple modes for each
Intuitive "hidden" parameters accessible through its Secondary Knob Mode
Tap Tempo via the built-in footswitch or an external one
Momentary Mode to switch effects in or out
Comes with a standard EHX EHX 9.6DC200mA power supply
Compact and rugged
Power adapter included

Specifications:
Circuit: Digital
Bypass: Buffered Bypass
Audio: Mono
Power Supply: 9.6VDC-200mA power adapter included
Dimensions (in): 4.5 x 2.75 x 2.1
Current Draw: 150mA
Year Released: 2019

Notes: Shopping for a British distortion pedal? Try the NUX Brownie! The Classical British rock tones of the 1970's, packed into one little box. How it works? By using a hybrid of circuits, we created truly unique pre-amp and power tube distortion characteristics. You'll be amazed to hear the warm, organic tone that's reproduced. Brownie has a specially designed BJT input stage causing it to "break-up" when the preamp tube starts to distort. It also has an asymmetrical clipping circuit letting you simulate some of the characteristics of an actual tube amplifier. It also keeps the bottom-end tight by processing bass frequencies which can get muddy when distorted.

Nux Brownie uses a low-pass tone control filter to simulate the Variac effect (by lowering the voltage going into the amplifier) for rounding-off your tone. The range of tone is controlled yet perfect for dialling-in the high-end response. The power clipping circuit is crafted from a modern low-noise op-amp and 2 red LEDs. It can create symmetrical clipping that distorts both halves of the signal keeping the sound smooth. True bypass circuits with a high quality TPDP mechanical foot-switch gives the bypass its phenomenal signal clarity.

Notes: Cerberus is a multi-function effect pedal which can be used stand-alone or with the 4 cable method and comes packed with extraordinary features including inside routing, IR loader, analogue overdrive & distortion and digital effects. You can use Cerberus as a stand-alone device to prepare your setup and control as a stomp-box chain and/or save any combinations including routing as a preset and recall by a single click. You can add your essential gears into the chain with using 4 cable method no matter which equipment you use. Cerberus also offers MIDI control to organize your own effect pedals and improve your effects control at the same time. We've put together 2 selected analogue Drive/Distortion pedals, modulation effects and delay & reverb effects.

Notes: The EHX Bass Mono Synth transforms your bass into eleven great sounding synthesizers... from vintage synth emulations to thick, stacked voices to deep pulsing sounds and more.

Its intuitive layout makes it easy to use and easy to dial in good sounds quickly. DRY controls the volume of your dry bass signal at the Synth Output. SYNTH controls the volume of the Synthesizer sound at the Synth Output. Used together they let you create just the right mix. The SENS control, short for sensitivity, adjusts how your playing dynamics trigger the synthesizer and allows you to fine tune the way the pedal responds to your bass rig and playing style.

With the CTRL knob you can adjust a key parameter for each of the eleven synth types. It varies depending on the preset and provides more tweakability for customizing your sound. There’s also an EXP input which lets you control an entirely different parameter in real-time with an expression pedal!

Using the built-in Preset footswitch, a user customizable preset for each of the eleven synth sounds can be created, saved and recalled. The factory presets are also easy to restore should you wish to.

From lush, warm sounds to sharp, percussive stabs, the Bass Mono Synth puts a collection of cool bass synths at your fingertips.

Notes: Produces volume and reverse swells, backward tape sounds, artificially short staccato notes and bowed instrument effects!

The circa-1980 Electro-Harmonix Attack Decay is a sought after prize among vintage pedal aficionados. Originally called a Tape Reverse Simulator, it's known for producing volume and reverse swells, backward tape sounds, artificially short staccato notes and bowed instrument effects. The freshly designed EHX Attack Decay reinterprets the classic and keeps its cool factor, but adds some modern features for convenience and enhanced functionality.

It can produce a single volume envelope like the original, or, with Poly engaged, put separate volume envelopes on each note you play. The built-in Harmonix fuzz is now a fully controllable distortion with gain, tone and volume controls. The effects loop allows the musician or sound designer to place the volume envelope onto whatever signal is present at the Return jack. Expression pedal/CV input and three user presets give the user total control over their Attack Decay!

Volume envelope manipulation with adjustable Attack and Decay times
Mono mode: one volume envelope at a time, the envelope resets when you play a new note
Poly mode: gives each note you play its own envelope
Built-in, fully adjustable, Harmonix fuzz enhances the volume envelope effect and produces bowed instrument sounds
Built-in effects loop allows for your own pedals to be inserted onto the volume envelope
Expression pedal or CV control over every knob on the Attack Decay
Save and recall up to three presets
Power adapter included

Specifications

Circuit: Digital
Bypass: Buffered Bypass
Audio: Mono
Effects Loop: Yes
Power Supply: 9.6VDC-200mA power adapter included
Dimensions (in): 4.75 x 4.13 x 2.25
Current Draw: 140mA
Year Released: 2019

Notes: The EHX 22500 is a stereo looper with two independent loops that can be played in sequence or in parallel. Flexible performance controls and creative effects allow you to loop in any way you imagine. It records high quality, non-compressed audio directly to a removable SDHC card (4 to 32 GB) and each card holds up to 100 individual loops. Includes an 8GB card for up to 12 hours of recording time.

Creative controls over looping functions such as adjustable tempo, programmable loop/overdub length, and two loops that can playback independently or locked to one another makes the 22500 act like the looper of your dreams.

Download free drum loops for the EHX 22500

Dual stereo loops with independent or locked loop lengths
Sequential looping mode enables verse/chorus switching
Parallel looping mode allows simultaneous playback of two loops
16 built-in drum loops
Selectable microphone input with phantom power
Reverse and Octave functions
Undo-Redo your last overdub or recording
Quantize or non-quantize (free running) modes
USB port enables backup/restore to PC or Mac
Programmable third footswitch for Stop or Tap Tempo
Optional external Loop Up/Down Foot Controller
Power adapter included

SPECIFICATIONS
Circuit
Digital
Bypass
Buffered Bypass
Audio
Stereo
Power Supply
9.6VDC-500mA power adapter included
Dimensions (in)
5.75 x 4.75 x 2.5
Current Draw
235mA
Year Released
2015