Studio Equipment charts

Notes: The ISO-PUCK mini is the new little brother of the popular ISO-PUCK, offering the same benefits but designed for lighter speakers and monitors. The IsoAcoustics ISO-PUCK mini provide an innovative new approach in isolating studio monitors, speakers and other systems. This unique design provides a high degree of isolation while resisting lateral movement and oscillations, which results in greater sound clarity and focus. This versatile isolation tool is possibly the most cost effective upgrade available for improving the performance and clarity of your speakers or monitors.

Notes: IsoAcoustics introduce the next evolution of their specialized line of speaker stands for the audio professional, music hobbyist, audiophile, and music lover. The new ISO Series of speaker stands provide superior acoustic isolation and enhance the sound clarity of any speakers including studio monitors, home theatre systems and sound reinforcement.

With a lower profile and new contemporary design, the ISO Series of stands positions your studio closer to the supporting surface or meter bridge, and the new redesigned isolators moves the acoustic performance another step forward.

IsoAcoustics ISO Series speaker stands are built with a unique, patented isolation technology that provides a high degree of isolations and manages the speaker's energy to deliver authentic, uncoloured sound. This next generation of speaker stands effectively eliminates energy transfer into the supporting surfaces. Bass becomes tighter, overall imaging is enhanced and your speakers are enabled to perform to their full potential. Following the same design philosophy as the ISO-L8R Series, these isolation stands provide 14 variations of height and tilt adjustment to optimize the placement and performance of studio monitors by getting the tweeters in the correct alignment with the listening position.

Whether you're a pro mixing in the studio - a musician creating in a home project environment - or an audiophile who appreciates every nuance of music and sound - you'll hear and appreciate the difference with the ISO Series speaker stands. It's simply the best investment you can make for superior audio.

ISO-155:

Designed for medium size speakers and studio monitors. These stands provide 14 variations of height and tilt to optimize speaker placement and performance. Isolate your studio monitors from the supporting surface and allow them to breathe so they can deliver the clearest and most accurate sound possible.

6.1"x7.5"/15.5x19cm Short: 2.9"/9.5cm Tall: 8.75"/22.5cm 40 lbs/18kg

Notes: It's all about the things you connect to the The Field Kit! To get you started, Koma Elektronik have decided to offer an Expansion Pack with a bunch of different sources that you can use and connect to create your own signature sounds.

The Expansion Pack contains:

- 2 x Contact Microphones: Use these contact microphones to pick up vibration or sound, they are an amazing versatile input source
- 1 x Electro-Magnetic Pickup: This guy is good at picking up changes in magnetic fields, you can use it to amplify a string like a guitar pickup or amplify a spinning motor
- 1 x Solenoid push-pull motor: Use the solenoid to hit things, together with the DC Interface the solenoid can make anything rhythmical and percussive
- 1 x DC motor: The Motor can be used to rotate things or as a noisy oscillator together with the Electro-Magnetic Pickup
- 1 x small speaker: Use the speaker to listen to the main mix or as a sound source and to feedback sounds
- 3 x patch cables Always handy to have around to patch up different parts of your Field Kit... and a bunch of little objects to play with (little springs, marbles)

The new KOMA Elektronik Field Kit is the perfect tool for everyone who would like to experiment with electro acoustic sound. Use everyday objects, amplify them and use them to make sound, like our heroes John Cage and David Tudor used to do!

The Field Kit is optimized to process signals from microphones, contact microphones, electromagnetic pickups and able to run DC motors and solenoids. On top of that it can receive radio signals and convert signals from switches and sensors into control voltage!

Notes: IsoAcoustics introduce the next evolution of their specialized line of speaker stands for the audio professional, music hobbyist, audiophile, and music lover. The new ISO Series of speaker stands provide superior acoustic isolation and enhance the sound clarity of any speakers including studio monitors, home theatre systems and sound reinforcement.

With a lower profile and new contemporary design, the ISO Series of stands positions your studio closer to the supporting surface or meter bridge, and the new redesigned isolators moves the acoustic performance another step forward.

IsoAcoustics ISO Series speaker stands are built with a unique, patented isolation technology that provides a high degree of isolations and manages the speaker's energy to deliver authentic, uncoloured sound. This next generation of speaker stands effectively eliminates energy transfer into the supporting surfaces. Bass becomes tighter, overall imaging is enhanced and your speakers are enabled to perform to their full potential. Following the same design philosophy as the ISO-L8R Series, these isolation stands provide 14 variations of height and tilt adjustment to optimize the placement and performance of studio monitors by getting the tweeters in the correct alignment with the listening position.

Whether you're a pro mixing in the studio - a musician creating in a home project environment - or an audiophile who appreciates every nuance of music and sound - you'll hear and appreciate the difference with the ISO Series speaker stands. It's simply the best investment you can make for superior audio.

ISO-130:

Designed for smaller speakers and studio monitors. These stands provide 14 variations of height and tilt to optimize speaker placement and performance. Isolate your studio monitors from the supporting surface and allow them to breathe so they can deliver the clearest and most accurate sound possible.

5.1"x6"/13x15cm Short: 2.7"/8cm Tall: 8"/20.3cm 20 lbs/9kg

Notes: A padded carrying case for the Theremini and Etherwave Theremins. Perfect for the thereminist on-the-go. Black nylon packcloth with 3/4" foam padding, removable padded shoulder strap, internal pouch for antennas, and external pouch for power supply unit.

Key Features

Nylon Construction
Pouches for Antennas & Power Supply
3/4" Foam Padding
Removable Shoulder Strap

Notes: - Works as a messenger style bag or a backpack
- Space for cables and AC adapter
- Built-in loop for attaching the bag to a suitcase handle

*Photographed Reface unit NOT included*

Notes: Two steel monitor stands, extendible from 75-130 cm. Max. load each: 30 kg.

- Adjustable monitor stands with cotter lock
- Particularly suited for 5.1 systems or close-range monitors
- Sturdy cast iron foot
- Comes as a pair
- Powder-coated steel version
- Colour: Black

Notes: Wooden side cheeks for The Vermona DRM1 (any mark).

If you would like to use those instruments as desktop unit you do cover the rack mount wholes with these nice wood sides, the unit feels much more handable and robust while packaging and using it in your live set.

Notes: The perfect lightweight travel case for your Digitakt or Digitone! Just zip it up and go make music anywhere. Analog Cases' durable PULSE cases are designed for mobile electronic musicians.

Description:

PULSE cases are made from molded EVA that holds its shape and provides excellent protection. This case is designed to hold the Digitakt or Digitone along with its power supply, and it also includes a nylon mesh compartment for holding your cables.

Specifications:

Perfect fit for your Digitakt or Digitone + cables

Versatile and lightweight

Spacious and comfortable handle

High quality Analog Cases logo zipper puller

Interior dimensions: 10.25 x 7.25 x 2.75 inches

Notes: Macro Power S8 is a pedal power supply with eight output power supply jacks, equipped with vary functions input voltage switch, independent output power jacks, over-current protection and adjustable output. It was designed to meet users needs and offer convenient and pure experiences.

Output power jacks: From left to right
One adjustable voltage output power jack, can choose output voltage from 9V/12V/15V/18V. The output current is 200mA.
Three independent output power jacks, each lines output voltage is 9V, and the output current is 200mA.
Four parallel output power jacks, each lines output voltage is 9V. And support the whole 400mA power needs that the four lines parallel into an independent output power jack.

Notes: Multi-purpose high quality XLR to XLR audio cables from Neo by Oyaide.

Notes: 1/4" TRS to 1/4" TRS

This snake is designed to interconnect pro audio gear with balanced phone jacks. It is ideal for use with mixing consoles and patch bays. Features include:

- Nickel-plated plugs for rugged durability and efficient signal transfer
- Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
- OFC spiral shields for effective EMI and RFI rejection and flexibility

Connectors: 1/4" TRS to 1/4" TRS

Notes: The Decksaver Moog Matriarch Synthesiser Cover features an ultra-durable polycarbonate shell, designed to protect from dust, liquid, particulates and accidental impact damage. It will also protect against superficial damage such as scratches or bumps while on the move. The high quality smoke/clear sheen allows you to see the Medusa through the cover, allowing you to see your gear at all times. The smooth and sheen like finish will slide straight into a bag, ideal for the travelling musician.

Notes: The Field Kit Sensor Pack A consists of 5 sensors:

- Button/Jack
- Electret Microphone
- Light Sensor
- Temperature Sensor
- Ball Switch
- 2 x Dupont 3 contact cable to connect the Sensors to the Field Kit

Button/Jack:

This is rather a utility tool than an actual sensor. It allows you to either use a pushbutton or any CV-Signal (0- 5V) as a signal source. You can select to either use the button or any signal connected to the jack input with the jumper located right next to pin-header. The voltage present at the output upon a button press can be selected with the two jumpers next to the button. The button and jack can be used with both the ANALOG IN and the DIGITAL IN of the Field Kit's Sensor Interface.

Electret Microphone:

The electret microphone provides a simple solution to use your surroundings as a sample source. The board features a little trimmer to adjust the gain of the microphone pre-amplifier. Use a little screwdriver to adjust the gain according to the printing on the sensor board. It's preferable to adjust the signal level with the trimmer first and only use the level pot of the analog signal interface as a second adjustment stage. The electret microphone has an omnidirectional directivity and is capable of capturing the whole frequency spectrum from 20 to 20000 Hz. The electret microphone is best be used with the ANALOG IN of the Field Kit's Sensor Interface.

Light Sensor:

The light sensor will change the output voltage depending on the light intensity. The spectral sensitivity is similar to the human eye, covering the full spectra of visible light, with a peak at 570nm (green/yellow). The change of the voltage according to the light intensity can be set with the three jumpers on the board. Set those jumpers according to printing on the board. The light sensor can be used with the ANALOG IN and the DIGITAL IN of the Field Kit's Sensor Interface.

Temperature Sensor:

The temperature board features two output modes: a continuous CV or a trigger.

CV Mode: The board will output a continuous voltage in range 0 - 5 V depending on the measured temperature and scaled to the set lower and upper temperature limit.

Trigger Mode: The board will generate a trigger whenever the measured temperature rises above the set upper limit temperature. LED 1 will blink whenever a trigger is generated. The sensor covers a temperature range from -55-C to +125-C.

Ball Switch:

The ball switch consists of a little bouncy ball jumping around in a container connecting two contacts and thus acts like a switch. In contrary to a normal push button, which has very well defined states, the switching of a ball switch is more similar to a percussion shaker. There are two resting-positions which define a certain state of the switch: the board is lying flat on the table with its bottom facing the table: the switch is open the board is lying flat on the table with its top facing the table: the switch is closed. The voltage assigned to those states can be set with the two jumpers on the board. Refer to the printing on the board to identify the position that suits your needs. The ball switch can be used with the ANALOG IN and the DIGITAL IN of the Field Kit's Sensor Interface.

Notes: Engineered specifically for the Native Instruments Kontrol S61 MK2 Keyboard Controller. Custom moulded to fit the contours of the S61 MK2 whilst leaving USB connections in place, the Kontrol S61 MK2 can sit ready for operation. Super durable polycarbonate shell protects delicate keys during transportation and slides straight into a flight case or controller bag for maximum protection. Don't go losing your keys.

Notes: Soft case - will ensure the safety of your instruments! Best quality from Cordura with exclusive material finishing with red thread. They are not so heavy as hard cases. High quality embroidered Lyra-8 logo. Very low weight!

(Protection - 1 cm hard foam made from Cordura: Cordura is the brand name for a collection of fabrics used in a wide array of products including luggage, backpacks, trousers, military wear and performance apparel. Cordura fabrics are known for their durability and resistance to abrasions, tears and scuffs.)

Notes: The CTRL Case MPC ONE is custom designed to a hold the new AKAI MPC ONE and is a very lightweight and convenient solution to carry your sampling workstation well protected to your next studio or live session. Crafted from rigid Durashock molded EVA shell and a high-density foam interior it is furthermore equipped with an accessory panel to organize audio cables and accessories.

FITS:
Akai MPC One

SPECS
Outer measures: 32 x 32 x 13,5 cm
Inner measures: 28 x 28 x 10 cm
Weight: 0,8 kg

Notes: Z-Rails are mounting rails for the Eurorack modular synthesizer format and are designed to be used for professional and DIY case mounting assemblies.

Z-Rails are sold in sets of two (2) aluminium, clear or black anodized rails, each containing a nickel-plated brass threaded strip with 3mm threads using 5.08mm spacing. The racks are easy to install into any frame using two (2) M4 screws, one for each side of the individual Z-Rails.

Notes: Your powerful and lightweight KeyStep 37 will instantly become portable with a proper case to protect it during travel. From composing in your DAW to jamming with hardware, the KeyStep 37 can go with you anywhere with this PULSE Case.

Description:

The PULSE Case for the Arturia KeyStep 37 was designed by musicians to be highly versatile for all your mobile mobile scenarios, from tossing it in the trunk to packing it inside your luggage. The KeyStep 37 case is made from rigid EVA material that holds its shape, and is shockproof and water-resistant.

This PULSE Case features an interior mesh pocket that can store any extra cables, as well as an ultrasoft velvet interior lining to prevent any scratches on the surface of the KeyStep 37. With the PULSE Case, you'll never have to worry about traveling with your controller, so you can focus on making great music!

Specifications:

Perfect fit for your Arturia KeyStep 37

Comfortable molded handle

Interior pocket for holding cables

Versatile and lightweight

Interior dimensions: 22.25 x 7 x 3 inches

Exterior dimensions: 23 x 8 x 3.5 inches

Notes: Pulse case for Elektron Digitakt / Syntakt / Digitone

The perfect lightweight travel case for your Digitakt, Syntakt, or Digitone! Just zip it up and go make music anywhere. Our durable PULSE cases are designed for mobile electronic musicians.

PULSE cases are made from moulded EVA that holds its shape and provides excellent protection. This case is designed to hold the Digitakt or Digitone along with its power supply, and it also includes a nylon mesh compartment for holding your cables.

Specifications

Perfect fit for your Digitakt or Digitone + cables
Versatile and lightweight
Spacious and comfortable handle
High quality Analog Cases logo zipper puller
Interior dimensions 10.25 x 7.25 x 2.75 inches

Notes: Dust cover for Soma Laboratory Pulsar-23

Notes: This PULSE case is molded to the exact dimensions of the Arturia MicroFreak / MiniLab / MicroBrute. It provides excellent protection for your synth, and is extremely lightweight.

PULSE cases are made from rigid EVA that holds its shape, and they feature a molded rubber handle that's tough and comfortable. This case also includes a nylon mesh compartment for holding your cables.

Weighing in at only 1 pound, this case is a breeze to haul around town. It looks great and is built to last, and can also be used to carry a wide variety of smaller devices.

Perfect fit for your Arturia MicroFreak, MiniLab or MicroBrute

Separate compartment for holding cables

Spacious and comfortable handle

Bottom foam insert to protect your keyboard (removable)

Interior dimensions: 15.25 x 9.25 x 2.5 inches

Exterior dimensions: 16.5 x 10.5 x 3.25 inches

Notes: Dust, liquid and accidental impact have taken many a good analogue synth down over the years - this is where Decksaver steps in. Precision trimmed for a perfect fit whilst accommodating cables, the OB-6 module can sit ready for operation. Our OB-6 module cover features Soft-Fit technology, providing extra protection to vulnerable wooden cheek panels that often adorn synthesizers. Slides straight into a flight or soft case for maximum protection during transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.

Notes: The CTRL MPC LIVE II is custom designed to a hold the Akai MPC LIVE II and is a very lightweight and convenient solution to carry your MPC well protected to your next studio or live session. Crafted from rigid Durashock molded EVA shell and a high-density foam interior it is furthermore equipped with an accessory panel to organize audio cables and accessories.

FITS:
Akai MPC LIVE II
MPC Live
Akai MPC Touch

BASICS:
Crafted from 6 mm thick and rigid Durashock molded EVA foam and water rejecting polyester exterior shell
Sturdy zipper
Including practical cable organizer panel
Incl. removable egg-foam padding to protect knobs, faders and pads
Comfortable carrying handles and shoulder strap
Compatible with Decksaverr cover

SPECS:
Outer measures: 44 x 29 x 13 cm
Inner measures: 42 x 27 x 11 cm
Weight: 1,26 kg

Notes: This snake is designed to interconnect pro audio gear with balanced phone jacks. It is ideal for use with mixing consoles and patch bays. Features include:

- Nickel-plated plugs for rugged durability and efficient signal transfer
- Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
- OFC spiral shields for effective EMI and RFI rejection and flexibility

Notes: A Digital DJ looking for a professional, durable case solution for your Akai MPC One+ controllers? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Akai MPC One+ controllers, these cases are perfect for the travelling DJ that needs to protect their equipment.

Specifications:

Color: Black
Weight: 0,56 kg / 1.232 lbs
Outer Dimensions (W x H x D): 38.3 x 28.6 x 6.7 cm | 15.1 x 11.2 x 2.6 inch
Inner Dimensions (W x H x D): 37.3 x 27.6 x 5.7 cm | 14.6 x 10.8 x 2.2 inch
Material: Durashock molded EVA foam
Protection: Soft fleece interior

Extra's:
Heavy-duty handle
Convenient carry handle
Easy grip zipper puller

Fits: Akai MPC One+, Akai MPC One, power adapter & extra cables

Please note: The Akai MPC One Controller is not included in this purchase, it is shown for demonstration purposes only.

Notes: A digital DJ looking for a professional, durable case solution for your Ableton Push 3? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Ableton Push 3, this case is perfect for the travelling DJ that needs to protect their equipment.

Specifications

Colour: Black
Weight: 0,90 kg / 1.98 lbs
Outer Dimensions (W x H x D): 42.4 x 40.7 x 6.1 cm | 16.7 x 16.0 x 2.4 inch
Inner Dimensions (W x H x D): 38.4 x 32.2 x 4.5 cm | 15.1 x 12.7 x 1.8 inch
Material: Durashock moulded EVA foam

Protection:

Covers main material 600D polyester with 5 mm EVA durashock moulded body
Water repellent laminated nylon exterior
Black soft fleece interior
Protective egg-crate foam prevent damage from vibrations & shocks

Extras

Extra space for cables
Heavy duty handle
Easy grip zipper pulls

Fits

Ableton Push 3 + extra cables

Notes: Introducing the PULSE Case for the Make Noise 0-Coast and 0-CTRL, which can store two Make Noise modules in one very convenient case. Analog Cases have included two cutouts in the case to transport the power supplies below the modules, and the included mesh pocket gives you plenty of space for storing patch cables. Of course, this case can also fit the new Make Noise Strega as well, so your mobile modular performance options are almost limitless!

The PULSE Case for the dual Make Noise instruments is made with durable EVA plastic, the same lightweight material used for football helmets and surfboards. With a PULSE Case, you can toss these synths in your backpack and take it anywhere to jam. Inside the top lid, there's a mesh pocket for storing patch cables, so that you can keep everything for your jam together in one place.

The PULSE Case for the Make Noise 0-Coast and 0-CTRL is molded to the exact dimensions of the semi-modular instruments, so you won't have to worry about the analog components getting damaged when you take your synths on the road.

Specifications

Perfect fit for the Make Noise 0-Coast and 0-CTRL
Made from lightweight and durable EVA material
Internal storage pocket for cables
Custom-molded and die-cut interior
High-quality black velvet lining
Exterior: (15 x 8.82 x 3.31) Inches

Notes: The floor stand comes with a cast iron base with an anti-vibration rubber ring. The height of the stand is adjustable from 870 to 1565 mm. It weighs 5.4 kg and its base diameter is 250 mm. Available in black color. Packed in a single cardboard box.

Stand plates which are designed to fit the Iso-Pod stand are recommended to use with this product. Please note, that we don't recommend using this product with the 8331 monitor.

Length min.
870 mm
Length max.
1565 mm
Width
250 mm

Notes: Custom engineered in the UK for the Elektron Digitone Keys Synthesiser, Decksaver's super durable polycarbonate shell protects against dust, liquid and accidental impact. Precision trimmed for an exact fit whilst accommodating cables, your MPC can sit ready for operation. Slides straight into a flight case or bag ready for transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.

Notes: The Elektron Model Samples/Cycles are perfect for making music on the go. But we all know traveling with gear comes with risks. Unlike soft nylon bags, this PULSE case is made from sturdy molded EVA material that will provide peace of mind for mobile musicians.

Description:

Custom-designed to the exact dimensions of the Model Samples /Model Cycles, it features a rigid exterior, soft, velvet-lined interior, and a nylon mesh pocket for cable storage. You won't have to worry about the safety of your machine when it's in this PULSE case.

Specifications:

Perfect fit for your Model Samples or Model Cycles + cables

Durable and lightweight

Spacious and comfortable handle

Interior mesh pocket

Interior dimensions: 11 x 7.25 x 2.25 inches

Notes: The Headliner 2-Tier Desktop Synth Stand was designed to improve your workflow and help you stay organized while fitting more gear on your production desk. It fits two compact devices like synthesizers, controllers, drum machines, and effects modules. The angled design makes it easier to reach knobs and view LCD screens.

The Headliner 2-Tier Desktop Synth Stand is adjustable in width from 7.3" to 11.5" and fits a variety of devices from Roland, Korg, Elektron, and more (partial list below). It is made from solid steel and includes non-slip rubber strips for added stability.

Features
Fits two devices like synthesizers, controllers, drum machines, and effects modules
Improve your workflow and stay organized while fitting more gear on your production desk
Angled stand makes it easier to reach knobs and view LCD screens
Solid steel construction with non-slip rubber pads keep stand in place
Width adjustable from 7.3" to 11.5"
Best fits devices from 8" to 14" in width
Each tier has a depth of 7"
Overall dimensions of stand (WxDxH): 7.3"-11.5" x 14" x 10.75"
Includes non-slip rubber strips
Fits: Akai Fire, Akai LPD8, Akai MPX8, Alesis SR-16, Arturia SparkLE, Behringer Crave, Behringer TD-3, Behringer RD-6, Dreadbox Typhon, Elektron Digitone, Korg nanoPAD2, Korg SQ-1, Korg Volca Bass, Korg Volca Beats, Korg Volca Drum, Korg Volca Kick, Korg Volca NuBass, Korg Volca Sample 2, Native Instruments Maschine Mikro MK3, PreSonus ATOM SQ, Roland Boutique Series, Roland MC-101, Roland TB-3 Touch Bassline, Roland TR-6S, and more.

Notes: Plastic dust cover for Soma Laboratory Cosmos.

Notes: Softube Console 1 & Console Fader Dual Valchromat Custom Stand- fits MK1 & MK2.

This stand has been precision CNC machined from Valchromat High Density Fibreboard.

Both the Console 1 and Console Fader sit into a recess cut into the sides, to provide a solid stand once assembled.

The stand is assembled by connecting the side panels with 8x Confirmat Screws which you are provided with, and also an allen key to assemble your stand.

The item will need assembly as it is sent flat packed. All screws and tools are provided this includes small rubber feet- however you must buy your own Console 1 & Console Fader.

DIMENSIONS:
34cm deep
17.5cm high (approx.)

Notes: This PULSE case was designed with one thing in mind: keeping your MicroKorg / MicroKorg XL+ in good condition and working properly. There's no need to settle for a generic gig bag. This is the one you've been waiting for!

Description:

This lightweight and user-friendly case is custom molded to the exact dimensions of the MicroKorg / MicroKorg XL+. Its rigid exterior will provide excellent protection for your synth.

Made with high-quality, durable materials, this case features a velvet-lined interior that will give you peace of mind when traveling with your MicroKorg. And this case also has a spacious interior pocket for storing your cables.

Specifications:

Perfect fit for your Korg MicroKorg / MicroKorg XL+

Separate compartment for holding cables

High-quality, premium handle designed for comfort

Extra-large premium zipper

Interior dimensions: 22 x 9 x 3.75 inches

Exterior dimensions: 23.75 x 11 x 3.75 inches

Notes: Two height adjustable monitor stands

A pair of high quality studio monitor stands with unique auto-lock ratchet system and tripod base

High quality studio monitor stands

Adjustable height up to 1.1 metre / 43.3 inches

Auto-lock ratchet system

3 x foot tripod base for easy studio placement

Height: 680mm x 1100mm / 26.7 x 43.3 inches
Maximum load: 40Kg / 88lb
Material: O 35mm / 1.37 inches aluminum pole and steel outer pole
Surface and colour: black powder coated
Weight: 3.2Kg / 7lb
The top plate is 224mm x 232mm

The Novopro SMS80R studio monitor speaker stands have been designed for ease of use as well as safety. The stand has an integral auto-lock ratchet system which allows you to adjust the height and lock in that adjustment without the usual slipping, dropping and inconvenience you get with standard monitor stands.

Kit includes the following:

2 x SMS80R monitor speaker stands
1 x allen (hex) key
2 x cable management clips
1 x instruction manual

Notes: Softube Console 1 & Console Fader Dual Solid Oak Custom Stand- fits MK1 & MK2.

This stand has been precision-machined from fully sustainable FSC approved European Solid Oak.

Both the Console 1 and Console Fader sit into a recess cut into the oak, to provide a solid and fixed stand once assembled which is what you need.

The stand is assembled by connecting the side panels with 8x Confirmat Screws you are provided with, and also an allen key to assemble your stand.

The item will need assembly as it is sent flat packed. All screws and tools are provided- this includes small rubber feet, however you must buy your own Console 1 & Console Fader.

DIMENSIONS:

34cm deep
17.5cm high (aprrox)

Notes: The Arturia KeyLab series has made a name for itself within the music realm with its cutting-edge innovation within keyboards.

The ability to be used as a keyboard, and to control different sounds, effects, and the unique way it can control any major DAW is a feature very few devices have.

With 16 pads, 9 faders, and 9 wheels you can see how much control you have over your sounds and recordings. However, with so many of these buttons and faders, there is always a risk of them getting damaged, which can render the device obsolete.

This is where Decksaver steps in. With their complex nature and banks of switches, knobs, screens and pads, the risk of harm is closer than you think. This is where Decksaver steps in.

Working with this wonderful unit, Decksaver have measured, designed and custom-moulded right here in the UK, a super-tough polycarbonate cover to perfectly fit the contours of this exciting Arturia device.

With years of experience working with plastics, we have created the perfect cover to protect your machine against dust, debris, liquids, smoke and accidental impacts.

The super-durable polycarbonate shells feature extreme durability and offers the highest degree of protection.

Dressing your unit in a Decksaver cover should mean you will never have to worry about your Keylab 61 getting damaged at home, in the studio or at the gig.

Fits

Keylab 61 MK1
Keylab 61 MK2

Dimensions

Weight: 1.2 kg
Length: 88.5 cm
Width: 30.7 cm
Height: 5.1 cm

Notes: This snake is designed to interconnect pro audio gear with unbalanced phone jacks. It is ideal for use with mixing consoles and patch bays. Features include:

- Nickel-plated plugs for rugged durability and efficient signal transfer
- Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
- OFC spiral shields for effective EMI and RFI rejection and flexibility

Notes: The ultimate case for your 16" or 15" MacBook Pro! Compatible with the 2022, 2021 or 2020 16" MacBook Pro, or the 2016-2019 15" MacBook Pro.

The Analog Cases PULSE MacBook Pro Case has been carefully designed to the unique needs of highly mobile creative professionals. If you demand the highest level of protection for your MacBook Pro, our PULSE Case will deliver.

The case features a die-cut EVA foam insert that is custom-fitted to the exact dimensions of both the 16" / 15" MacBook Pro. In the unfortunate event of any falls, the EVA material is shock-resistant and will absorb the blow to prevent any damage to your laptop.

A spacious storage area underneath the laptop has a dedicated compartment for your charger, plus two other large compartments that are a perfect fit for many popular external hard drives such as LaCie or Western Digital. The upper lid of this case features two additional storage pockets for your cables and accessories.

This case also features a super-soft velvet interior lining, ballistic nylon exterior, comfortable and ergonomic handle, and our signature sleek and minimalist aesthetics.

Description

Whether you're a music producer, photographer, video editor, or podcaster, you'll appreciate the serious protection, versatile storage options, and compact design of our rigid molded case.

The PULSE MacBook Pro case is the ONLY case that features a die-cut EVA foam insert that is custom-fitted to the exact dimensions of the 16" or 15" MacBook Pro.

As a creative professional, your external hard drive, battery packs, and cables are just as important as your laptop itself. That's why this case has been designed for maximum versatility and storage capacity. A spacious storage area underneath your MacBook Pro has a dedicated compartment for your charger, plus two other large compartments.

And that's not all. The upper lid of this case features two additional storage pockets for your cables and accessories, which are separated by a padded divider to keep everything organized and protected. The storage pockets can be securely sealed with a velcro strap to ensure that your gear remains in place during travel.

Specifications

Die-cut EVA foam insert customized to the exact dimensions of the 16" or 15" MacBook Pro

3 dedicated storage compartments for accessories that measure:
- 12" x 3.3" x 1.1"
- 7.2" x 3.2" x 1.1""
- 3.7" x 3.2" x 1.1"

2 interior storage pockets, each measuring 15.4" x 8.3"

Exterior case dimensions: 18.75" x 12.5" x 3.25"
Interior case dimensions: 16.4" x 11" x 3"
Weight: 3.4 lbs

Notes: Introducing the Ergonomic Studio Stand for Ableton Push 3: a game-changer in the world of music production. Designed with your comfort and productivity in mind, this stand is the ultimate solution for those seeking a more immersive and ergonomic music-making experience.

Crafted with precision, the stand offers a sleek and sturdy design that seamlessly integrates with your Ableton Push 3 controller. By elevating your controller to an optimal height and angle, it eliminates the strain on your wrists and neck, allowing you to focus on your creativity without any discomfort.

One of the standout features of this stand is its ability to enhance your visual experience. With a specially designed screen mount, it brings the Ableton Push 3's display closer to your line of sight, ensuring crystal-clear visibility of every detail. No more squinting or straining your eyes to read parameters or follow your music-making process. The screen becomes an extension of your creativity, effortlessly accessible at all times.

The stand's ergonomic design also promotes a more organized and efficient workspace. Its integrated cable management system keeps your cables neat and tangle-free, reducing clutter and allowing you to concentrate fully on your music production. Additionally, the stand's robust construction ensures stability, even during intense sessions, guaranteeing a secure and reliable platform for your Ableton Push 3.

Whether you're a professional music producer or an aspiring artist, the Ergonomic Studio Stand for Ableton Push 3 offers unparalleled comfort and convenience. It enhances your workflow, minimizes physical strain, and maximizes your creative potential. Take your music production to new heights with this exceptional accessory that is both stylish and functional.

Upgrade your studio setup today and revolutionize the way you create music with the Ergonomic Studio Stand for Ableton Push 3. Experience comfort, visual clarity, and an improved working environment that will elevate your musical journey to new levels of excellence.

Notes: Oak Veneered Roland Boutique Custom Made Stand / End Cheeks for the JX03, JP08, JU06, SE02, TR09, TB03, TR08 etc.

This new Oak Veneered version of the stand holds 3 Roland Boutique synths. This will also fit the the tr09, tr08, se02. sh01a and tb03 etc. However, you will need to remove them from the additional case that they come with.

This stand has been made from Oak Veneered MDF wood, and is connected via 12x allen head Confirmat Screws (Allen Key & Screws Provided) into an mdf wooden bar.

These are a great addition to the Boutique synths, and give a much nicer look and better working angle.The Boutique Synths are gripped in place by the sides of the stand, so do not fully tighten screws until the units are placed inside- then tighten screws to hold firmly in place.

Make sure you do this on a flat surface to ensure the feet are correctly aligned.

The item will need assembly as it will be sent flat packed. All screws, tools and rubber feet are provided, however you must buy your own Roland Boutique Synth.

Notes: You are looking at custom-made Korg Volca QUAD Stand / End Cheeks.

This stand holds 4 Korg Volcas, although the Korg SQ1 will also fit.

This stand is made from MDF Fibreboard, and is connected via 16x allen head Confirmat screws (Allen Key & Screws Provided) into a mdf wood bar.

Please note: you will get plain MDF and not darker like in some of the photos.

These are a great addition to the Volcas, and give a much nicer look and working angle. You can also flip them round to have a much steeper angle if you prefer. These can also be painted with ease or stained with wood stain to suit your studio.

The Volcas fit snuggly into the stand so do not fully tighten the screws until the Volca is placed inside then tighten screws to hold in place firmly. Make sure you do this on a flat surface, to ensure the feet are correctly aligned.

The item will need assembly as they will be sent flat packed. All screws and tools are provided; this includes the small rubber feet. However, you must buy your own Korg Volca.

Notes: This stand has been precision CNC machined and hand finished from FSC Certified European OAK, the panels have been recessed for your Maschine MK3 to make sure its held firmly in place which is perfect for live and studio use.

A slight working angle has been added for your studio setup, which certainly helps when on a desktop.

The stand is assembled by connecting the side panels with 4x Confirmat Screws. All the fixings and an allen keys to assemble your stand ready for use are provided.

Please note: you will get only the oak stand- you must purchase your own NI Maschine MK3.

The item will need assembly as it is sent flat packed. All screws and tools are provided, this includes the small rubber feet.

Notes: Soft case for Soma Laboratory Cosmos.

Notes: Protect your Moog Subsequent 37 when not in use. This water-repellent dust cover is made from rugged Ballistic Cordura to safeguard your gear from dust, spills, and other studio (and stage) mishaps, while the ultra-soft interior remains gentle against your synth.

Custom fit with a side recess to accommodate I/O panel access.
Designed in conjunction with Subsequent 37 for a custom fit
Water-repellant and tear-resistant Ballistic Cordura outer
Ultra-soft interior
Cutout for IO panel access

Notes: Oak Veneered Roland Boutique Custom Made Recessed Stand / End Cheeks for the JX03, JP08, JU06, SE02, TR09, TB03, TR08 etc.

This new version of the stand holds 3 Roland Boutique synths, This has been precision machined with a CNC Router so the boutiques lock firmly in place and cannot fall out.

This will fit all the Roland Boutiques, however you will need to remove them from the additional case DK01 that they come with.

This stand has been made from Oak Veneered MDF wood and is connected via 8x allen head Confirmat Screws (Allen Key & Screws Provided) into an mdf wooden bar.

These are a great addition to the Boutique synths and give a much nicer look and better working angle.

The Boutique Synths are gripped in place by the sides of the stand so do not fully tighten screws until the units are placed inside then tighten screws to hold firmly in place. Make sure you do this on a flat surface to ensure the feet are correctly aligned.

This item will need assembly as it will be sent flat packed. All screws, tools and rubber feet are provided however you must buy your own Roland Boutique Synth.

Notes: The Arturia KeyLab series has made a name for itself within the music realm with its cutting-edge innovation within keyboards.

The ability to be used as a keyboard, and to control different sounds, effects, and the unique way it can control any major DAW is a feature very few devices have.

Working with this wonderful unit, we have measured, designed and custom-moulded right here in the UK, a super-tough polycarbonate cover to perfectly fit the contours of this exciting Arturia device.

With years of experience working with plastics, we have created the perfect cover to protect your machine against dust, debris, liquids, smoke and accidental impacts.

This super-durable polycarbonate shells feature extreme durability and offer the highest degree of protection. Dressing your unit in a Decksaver cover should mean you will never have to worry about your Keylab 61 getting damaged at home, in the studio, or at the gig.

Dimensions

Weight: 1.102 kg
Length: 80.1 cm
Width: 30.7 cm
Height: 4.8 cm

Material: Smoked clear polycarbonate.

Notes: Small bag with front pocket to fit field mixer and any cables or smaller items. hook-and-loop secures the strap so it can be worn in a variety of ways: cross body, over the shoulder or on the waist.

The belt loop can be used to fix to the field belt strap.
Shell fabric is tear and abrasion resistant, nylon 66. Treated with fire retardant, and backed with PU for a 3000 mm water repellent rating.
Hardware is custom designed aluminium alloy 7075-T6.
Dimensions: 120 mm x 95 mm x 30 mm

Notes: Roland TR8S Drum Machine/Sampler Oak Stand

This stand has been precision machined and hand finished, the panels have been recessed for your Roland TR8S to make sure it's held firmly in place.

The stand is assembled by connecting the side panels with 4x Confirmat Screws. All the fixings and an allen key to assemble your stand ready for use are provided.

Please note: you will get only the oak stand you must purchase your own Roland TR8S.

The item will need assembly as it is sent flat packed. All screws and tools are provided- this includes small rubber feet.