100% Sicheres Einkaufen

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Sicheres Einkaufen

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Back In Stock: Studio Equipment

Startseite  Back In Stock  Studio Equipment  

14 days

Options
Artikel 1 bis 50 von 101 auf Seite 1 von 3 anzeigen
1  2  3  »
AJH Synth Gemini 2412 Dual SVF Module (silver)
Cat: 698444 Rel: 09 Aug 18
 
Dual vintage state variable filters - silver faceplate
Notes: The Gemini 2412 is a creamy, extremely fat sounding dual filter based on vintage Oberheim SEM circuits. In addition to high-pass, band-pass and low-pass, there is the infamous variable filter type, which allows you to blend between several characteristics. Thanks to its dual concept, serial and parallel modes of operation and an ingenious modulation system, the Gemini 2412 should not only be able to achieve classic, extremely bulbous results, but also wafting stereo effects and lively formant sounds.
Read more
MRP:$445.33 SAVE 18%
 1 in stock $364.65
Click for better price!
or call +44 20 7424 1960
quote 698444
AJH Synth V Shape Wave Twist & Distort Module (black)
Cat: 688825 Rel: 01 Aug 18
 
Wave twister/distortion module - black, 10HP
Notes: The V-Shape is two modules in one, a wave twister and a distortion/wavefolding module. Both sections of the module are all analogue in design, and both can be used independently, or they can be normalised together in series, so that a waveform can be twisted first and then distorted and wavefolded.

The wave twister can take (for example) a saw tooth waveform as an input and shape it, under manual or external voltage control, through to being a triangle waveform and on to being a ramp waveform, and produces a sound similar to PWM for sawtooths. It will also work with symmetrical waveforms such as triangle and sine waves, again producing PWM like tones.

It can produce a wave twisting effect from most waveforms (with the exception of square waves), whether they are symmetrical or asymmetric. Under many conditions the transfer function is not perfect, so different harmonics may be generated too. The offset control allows a bias to be added to the incoming waveform, either to bias it correctly around zero or offset it for more distortion and harmonics.

The second part of the V-Shape module is a distortion unit, with selectable Soft or Hard Clipping, and the clipping amount can be varied either by a front panel control or an external control voltage with the "Distort" control. The distortion offset control adds or subtracts a bias voltage to the CV signal, to give an extended range of control. There is also a single stage, switchable wavefolder, which can be used with either soft or hard clipped waveforms.
Read more
MRP:$271.07 SAVE 17%
 1 in stock $223.73
Click for better price!
or call +44 20 7424 1960
quote 688825
Allen & Heath ZED10FX Mixer
Cat: 431968 Rel: 17 May 12
 
Multipurpose studio mixer with FX
Notes: Ten-channel version of one of the most cost-effective mixers on the market. Great sound, good EQ and handy built-in effects. Check out the 12-channel version if you prefer faders for level control.

Supplier's notes:
The Allen & Heath ZED-10FX mixer is an amazing little desk for small band mixing. It is ultra portable for carrying to the gig, and can be used for recording live or in the studio. It comes with configurable USB audio in/out making it easy to capture stereo recordings.

Guitars can be plugged in directly to the mixer using the specially designed high-impedance inputs, while the mixer has two stereo inputs for MP3/CD players or keyboards. Equipped with professional XLR stereo outputs and a flexible monitoring section with headphone and speaker feed outputs. We've added a set of fabulous effects to give shimmering reverbs and enhance your sound.

USB AUDIO FLEXIBILITY
Getting audio to and from a computer easily is now a common requirement for live sound and music production. The way this has been implemented on ZED is super-flexible and super-easy! No longer do you need to fiddle around the back of your PC to get to the soundcard inputs, only to find that the levels are all wrong and noisy. Just plug in a USB lead to your ZED, select the USB routing on the mixer and the device on your computer and that's it! CD quality audio to and from your PC or Mac. Switches and connection through jack socket terminals provide different send/return configurations:-

SEND OPTIONS:
1) Main Mix Left + Right (Post master Level)

2) Aux + FX bus (Aux is a pre-fade send, FX is a post-fade send)

3) Record Bus Left + Right (Separate stereo bus to Main Mix)

RETURN OPTIONS:
1) To Playback input (through jack socket break contacts)

2) To Stereo 2 channel (through jack socket break contacts)

ZED-10FX features a responsive 3-band, swept mid frequency EQ design which utilises MusiQ - with optimised slope (or Q factor) for equalising individual instruments.

ZED-10FX has an essential selection of 16 time-delay effects, designed for small groups who don't want to carry around an effects unit with their gear but who still want great quality FX at their gigs and on their recordings. Our DSP engineers worked hard, crafting and refining beautiful reverb algorithms to enhance every performance. These effects are available nowhere else at this price point - this quality and integration is only available from the ZED-FX. ZED effects are easily controlled using 3 buttons with 9 display LEDs. For example, the ideal delay time can be quickly tapped-in, or the perfect amount of reverb on the lead vocal can be dialled-in. There is one-stop navigation and editing - in fact, it's just as easy as using effects pedals. To alter effects parameters, the TAP button is held down and the up/down buttons pressed to adjust the specific parameter for that effect, for example, the decay length on PLATE, or the depth on CHORUS.

ZED-10FX's pre-amps are similar in design to our MixWizard range of mixers, but with a twist! Inputs 3 & 4 have a high impedance jack input capable of taking either a normal line level or a low level input from a guitar pickup. These newly designed inputs have been crafted with the aim of replicating the sound of a classic guitar or instrument tube pre-amp in a combo or head amp. An extremely high input impedance ensures loading on pick-ups is minimal and a Class A FET (field effect transistor) circuit powered from 48V is employed to give the valve-like gain stage. There is a gain "Boost" switch associated with the guitar inputs which boosts gain by 26dB to cater for instruments with very low level outputs and the overdrive characteristics of the guitar inputs are very similar to a valve (tube) circuit, being asymmetric and soft. All this makes for a wonderfully natural sound to be reproduced from the instrument, full of warmth and character.

The ZED-10FX is bundled with IK Multimedia's AmpliTube X-GEAR software, giving access to superbly modelled amps and effects.


Read more
 2 in stock $257.09
Click for better price!
or call +44 20 7424 1960
quote 431968
Animal Factory Coma Reactor Delay Module
Cat: 714519 Rel: 25 Jan 19
 
Gritty sounding delay effect with open feedback path - 10HP
Notes: The Coma Reactor module from Animal Factory Amplification is an innovative delay with a variety of sonic possibilities.

It is based on a PT2399 delay chip and offers amazing routing and sound design options.

The Coma knob is an attenuator for the input signal. Low levels can generate funny noises. The input signal is mirrored at the Thru output, for further processing with another module.

There are separate dry and wet potentiometers to adjust the desired effect amount.

The delay time ranges from 30 to 2000 ms. It can be controlled manually via the Time knob or with control voltage thanks to the MOD input, which is equipped with an attenuverter and a switch for setting the amount of modulation. Furthermore there is a LED which indicates the CV polarity.

The delay features a feedback knob for controlling the repeats. Turned fully clockwise it will bring up self-oscillation.

Thanks to an integrated send/return path it is possible to use the module with external effects. The volume of the external effect is controlled by the Return potentiometer. If nothing is connected to send/return, the delay signal is routed internally through a crude twin-T Bandpass Filter. The effected signal can be fed back into the delay circuit thanks to a dedicated Return Feedback knob.
Read more
MRP:$211.69 SAVE 20%
 2 in stock $169.96
ART TPatch Eight Point Balanced Patch Bay
Cat: 458032 Rel: 02 Jun 12
 
8-point balanced patchbay
Notes: The ARTcessories TPatch is a compact 8-point balanced patchbay that organises your cables into a convenient central location on your studio desktop. Designed for maximum flexibility, the TPatch has 1/4" TRS phone connectors user selectable normal and half-normal modes.

The compact black-anodized all aluminum case and it's passive design allow the TPatch to provide years of trouble free service.

The specifications:

Connectors: 1/4" TRS balanced phone jacks
CMRR: > -90 dB (typical)
Isolation: > -80 dB (typical)
Dimensions (mm): 47 H x 117 W x 99 D
Weight: 0.38kg

Connectors: 1/4" TRS balanced phone jacks
CMRR: > -90 dB (typical)
Isolation: > -80 dB (typical)
Dimensions: 47mm x 117mm x 99mm
Weight: 0.38kg.
Read more
 2 in stock $43.42
Click for better price!
or call +44 20 7424 1960
quote 458032
Arturia Keylab MkII 61 Key USB MIDI Controller Keyboard (black)
Cat: 694337 Rel: 30 Aug 18
 
Expressive, versatile & powerful next-generation 61-note USB MIDI controller keyboard - black
Notes: The definitive MIDI controller keyboard, KeyLab MkII is a luxurious, expressive tool for your studio or live rig. Unsurpassed connectivity, effortless integration, customizable interface, and inspiring included software; there simply is no other MIDI controller quite like KeyLab MkII.

KeyLab MkII is an expressive, versatile, and superbly powerful next-generation USB MIDI controller keyboard. It features dynamic performance and studio controls, including a high quality 49-note keyboard with aftertouch, 16 RGB backlit pads, 9 faders, 9 rotary knobs, and dedicated DAW and transport controls. Its huge connectivity also includes CV/Gate outputs, so you can take command of outboard synth and Eurorack modules with ease. Factor in the amazing included software, and you've just found your ideal creative companion for the studio and stage.

Another level in terms of quality and luxury, KeyLab MkII is a treat for the fingertips and gives unprecedented levels of control over your music and software.

Both 49-key and 61-key versions of KeyLab MkII feature Arturia's Pro-Feel action, the same lusciously playable keybed as the MatrixBrute and MiniBrute 2. Sensitive enough to accurately capture the subtleties and nuances of delicate playing, while still being robust enough to feel the energy of high-impact playing.

Every version of KeyLab MkII also offers 16 RGB-backlit, multi-function performance pads which can be used in a huge variety of ways, whatever suits your performance style or studio needs best. Trigger custom chords, activate samples, quickly switch user maps, KeyLab MkII puts the "control" firmly back into "controller".

A gateway to software, KeyLab MkII features 9 rotary encoders, 9 faders, and a selection of fully assignable buttons to give you unfettered access to your virtual instruments, effects, and recording environment. Send and receive CV/gate data to bridge the gap between modular and MIDI, with a fully customizable setup.

To allow for maximum expression, and to put that unmistakable "human touch" into your music, KeyLab MkII features multiple expression pedal inputs, that can be assigned to whatever parameters you desire in your DAW or virtual instruments, and sports robust, luxurious machined metal pitch and mod wheels. Truly a live-performers dream!

Amazingly versatile, hugely expressive, and geared up to enhance your creativity and workflow wherever your music takes you.

Included is an impressive software bundle: Arturia's complete Piano V virtual piano instrument, Analog Lab 3, and Ableton Live Lite.
Read more
MRP:$592.48 SAVE 22%
 2 in stock $464.68
Click for better price!
or call +44 20 7424 1960
quote 694337
Befaco Bananuts Anodised Aluminium Custom Minijack Nuts (white, pack of 25)
Cat: 739911 Rel: 20 Sep 19
 
Pack of 25 Bananuts in white colour
Notes: Bananuts are anodized aluminium custom minijack nuts, following Buchla/Serge colouring code: Blue, purple, red, orange, yellow, white, green and black. Perfect lovely thingies to pimp your modular, code your inputs and outputs with colours or just give a touch of beauty to your favourite gear!
Read more
MRP:$14.20 SAVE 26%
 1 in stock $10.49
Boss RC505 Loop Station
Boss RC505 Loop Station (loop station)
Cat: 489070 Rel: 28 Jun 13
 
Tabletop loop station with 5 stereo phrase tracks, built in effects and 85 onboard rhythms
Notes: Beatboxers, singers, and club performers, your loop station has arrived. Introducing the RC-505, a unique and powerful live performance tool that's perfect for next generation loop artists. In a compact tabletop device, you have easy fingertip control of 5 stereo phrase tracks and various loop playback behaviors, plus input FX and track FX that deliver a wide range of real-time processing options for dynamic, expressive sound creation. Just plug in a mic, instrument, or other audio source, and then ride the intuitive panel controls to build and mix some amazing loops. The RC-505 also supports computer integration via USB and operation with external pedals and MIDI, opening a world of advanced looping possibilities for all types of musicians.

The RC-505 features 5 stereo phrase tracks that can play simultaneously, the most yet in the Boss Loop Station. Independent record/overdub/play and stop buttons for each track let you capture and control loop performances with your fingertips, and dedicated volume faders allow you to mix loop levels on the fly. Each track can have its own playback mode (multi, single, one shot, reverse, etc.) and tempo sync settings, providing an unlimited range of creative looping behaviors.

With the large selection of built in effects, it's easy to enhance your sounds as you perform. The Input FX such as robot and vocoder create unique, dramatic sound textures for recording loops, while the track FX like vinyl flick and beat repeat provide dynamic DJ and sampler effects for real time processing of phrase playback. 6 dedicated buttons - three each for input FX and track FX, can be loaded with your favorite effects, giving you one touch on/off access while looping. In addition, effects parameters (filter cutoff, effect depth, etc.) can be tweaked in real time with the input FX and track FX knobs. Global compressor and reverb effects are also available for processing the overall sound output.

99 x phrase memories provide onboard storage for phrase track data, various playback and effects settings, and more. A combination of frequently used settings can be saved as a User Set, which you can easily load to quickly reconfigure any phrase memory, even in the heat of performing. 85 different onboard rhythms offer backing for loop recording, with a large selection of odd measure beats for advanced looping. The rhythm part can be routed to the rear panel phones jack only, giving you a dedicated click track for monitoring purposes.

The RC-505 is outfitted with a number of simultaneous inputs, allowing you to capture and mix a variety of different audio sources as you build loops. There's an XLR microphone jack with phantom power, mono/stereo 14" inputs for guitars, synths, or other instruments, and an AUX mini jack for connecting a music player, smart phone, or other stereo device. Via USB, you can plug into your computer and import/export WAV audio phrases, great for loop archiving or loading up RC-505 phrases with backing tracks or sounds for sampler style triggering. The RC-505 also functions as a USB audio/MIDI interface, making it simple to integrate with your favorite DAW software for audio recording, MIDI sync, and more.

With the RC-505, you have the ability to set up customized real time controls for the way you like to loop. You can specify up to eight different functions and operate them in a variety of waysiwith front panel controls, an external expression pedal or foot switches, and/or various MIDI control change messages - extending your command of looping and many other operations. The 8 control assignments are stored with phrase memories, allowing you to create and recall custom setups for different songs and performing situations.
Read more
MRP:$601.51 SAVE 26%
 More than 10 in stock $443.17
Chord 2 x 6.3mm TS Jack To 2 x RCA Phono Lead (1.5m)
Cat: 630532 Rel: 28 Nov 16
 
Professional low-noise audio cable - 2x 6.3mm TS Jack to 2x RCA - 1.5m length
Notes: High quality audio leads for exceptional sound quality and reliability. High grade twin cable comprises an insulated pure copper core and global shielding. The durable PVC sheath has a soft texture to avoid knotting. Terminated at one end with a pair of RCA phono plugs and at the other end with 2 x 6.3mm mono jack plugs.
Read more
MRP:$6.45 SAVE 48%
 More than 10 in stock $3.33
Chord 6.3mm TRS Jack To 2 x RCA Phono Lead (3.0m)
Cat: 562103 Rel: 05 Feb 15
 
Single 1/4" TRS jack connector to twin RCA connector lead
Notes: High quality audio leads for exceptional sound quality and reliability. Twinned high grade cable comprises 2 insulated pure copper cores and global shielding.

The durable PVC sheath has a soft texture and is reinforced with cotton cord to avoid tangling.

Terminated at one end with a 6.3mm stereo (TRS) jack and at the other end with 2 x RCA phono connectors.
Read more
MRP:$6.45 SAVE 38%
 More than 10 in stock $3.98
Chord 6.3mm TRS Jack To 6.3mm TRS Jack Cable (0.75m, balanced)
Cat: 444517 Rel: 05 Jan 12
 
Audio cable
Notes: The Chord cable lead is the high quality audio lead for exceptional sound quality and reliability. The high grade cable comprises 2 insulated pure copper cores and global shielding. The durable PVC sheath has a soft texture and is reinforced with cotton cord to avoid tangling. Each end is terminated with a pro-quality 6.3mm stereo (TRS) jack plug.

Read more
MRP:$5.16 SAVE 53%
 More than 10 in stock $2.43
Chord 6.3mm TRS Jack To 6.3mm TRS Jack Cable (3.0m, balanced)
Cat: 444521 Rel: 05 Jan 12
 
1/4" TRS jack audio cable, male to male
Notes: The Chord cable lead is the high quality audio lead for exceptional sound quality and reliability. The high grade cable comprises 2 insulated pure copper cores and global shielding. The durable PVC sheath has a soft texture and is reinforced with cotton cord to avoid tangling. Each end is terminated with a pro-quality 6.3mm stereo (TRS) jack plug.

Read more
MRP:$7.74 SAVE 57%
 More than 10 in stock $3.33
Chord Classic 2 x 6.3mm To 2 x 6.3mm Mono Jack Plug Leads (1.5m)
Cat: 554489 Rel: 06 Nov 14
 
Twin 1/4" mono jack leads - male to male
Notes: High quality audio leads for exceptional sound quality and reliability. High grade twin cable comprises an insulated pure copper core and global shielding.

The durable PVC sheath has a soft texture to avoid knotting. Terminated at each end with a pair of 6.3mm mono jack plugs.
Read more
MRP:$7.74 SAVE 44%
 More than 10 in stock $4.30
Chord Female XLR To 1/4" TRS Jack Lead (6.0m)
Cat: 491478 Rel: 09 May 13
 
6m female XLR to 1/4" TRS jack cable
Notes: High grade cable comprised of an insulated pure copper core and global shielding. The durable PVC sheath has a soft texture and is reinforced with cotton cord to avoid tangling. Terminated at one end with a female XLR connector and a 1/4" TRS stereo jack at the other end.
Read more
MRP:$9.04 SAVE 36%
 2 in stock $5.76
Chord MIDI Cable (black, 1.5m)
Cat: 416484 Rel: 26 Jan 11
 
5 pin DIN to 5 pin DIN MIDI cable
Notes: A High quality MIDI cable for connecting music controllers and devices together. Strong and flexible cable with low loss conductors and global shielding ensure a clean data stream. Terminated at each end with a 180 degree 5 pin DIN plug.
Read more
MRP:$3.87 SAVE 58%
 More than 10 in stock $1.61
Doepfer A-100MNT Mini Power Supply & Bus Board For Eurorack
Cat: 755435 Rel: 12 Nov 19
 
Miniature PSU/bus board
Notes: The A-100 MNT (Mini power supply/bus) is composed of a miniature power supply and system bus, with connectors for four modules. It's designed to be used with a small set-up of just a few modules, in your own custom-designed case. The idea is that then you can use individual A-100 modules - for instance the filters, the filterbank, frequency shifter, sampler, MIDI interface, etc. - as free-standing pieces of equipment, which can easily be integrated with your other instruments or recording equipment.

The power supply provides the usual A-100 system requirements of +12 V and -12 V, and an additional +5 V supply, for the few modules (for instance A-190, A-191) which need it. The maximum current loading capacity totals 100 mA for +/- 12 V and/or 50 mA for the +5 V supply.

The system bus provides connections for four System A-100 modules. As well as the power supply, it also carries "INT.CV" and "INT.GATE" connections (see A-100 manual, main introduction, chapter 3, 'The A-100 signal flow'.).

The A-100 MNT is supplied as standard with an external power supply, which has to be connected to the socket on the MNT's circuit board.
Read more
 1 in stock $52.70
Click for better price!
or call +44 20 7424 1960
quote 755435
Doepfer A-130-8 Octal Linear VCA Module
Cat: 765896 Rel: 28 Jul 20
 
linear VCA module
Notes: Lots of functionality in a compact format thanks to Doepfer's typically smart approach. Eight linear VCAs with three mixers built in for good measure. Can be used for both audio and CV signals. Versatile.

Supplier notes:
Module A-130-8 contains eight linear voltage controlled amplifiers (VCAs). Each VCA features a control voltage input (CV), a signal input (In) and a signal output (Out). In addition three mixers are included: the socket labelled "1-4" outputs the sum of the VCAs 1-4, the socket labelled "5-8" outputs the sum of the VCAs 5-8, the socket labelled "1-8" outputs the sum of all eight VCAs.

The signal inputs are able to process levels up to 10Vpp without clipping. Each CV input is equipped with a trimming potentiometer that is used to adjust the sensitivity of the CV input in question. In the factory the module is adjusted for the CV range 1...+5V but can be re-adjusted by the user for other control voltage ranges (e.g. 0...+10V).

The amplification range for each single VCA is 0...1. The signals of the sum outputs have a lower amplification to avoid distortion.

The VCAs and mixers are fully DC coupled, i.e. the module can be used for the processing of both audio and control voltage signals. The control voltage and signal inputs can be normalled by means of small solder pads (e.g. 1 > 2 > 3 > 4 and so on, or 1 > 5, 2 > 6, 3 > 7, 4 > 8 for the stereo application mentioned below).

Typical applications:
any kind of VCA application (e.g. voltage controlled attenuation of audio or control voltage signals)
two voltage controlled mixers with four channels each
voltage controlled stereo mixer with four channels each, for this the control voltage inputs have to be correspondingly patched or internally normalled: CV1=CV5 /CV 2=CV6 / CV3=CV7 / CV4=CV8
voltage controlled mixer with eight channels
add-on for the planned Joystick module A-174-4

HP : 6
Read more
MRP:$104.55 SAVE 12%
 More than 10 in stock $92.29
Click for better price!
or call +44 20 7424 1960
quote 765896
Doepfer A-180-3 Dual Buffered Multiple Module
Cat: 751720 Rel: 23 Oct 19
 
Dual buffered 1-in-3 multiple module - 4HP
Notes: Module A-180-3 is a dual buffered 1-in-3 multiple. The signal applied to the input socket appears as a buffered signal at the three output sockets. Each output has its own buffer, i.e. the three output sockets are not simply connected to each other. The lower output of the upper unit is normalled in the factory to the input of the lower unit. That way the module works as a single 1-in-6 buffered multiple provided that no signal is applied to the input of the lower unit. But it's also possible to pick-up the bus CV and normalize the input socket of the lower unit to the bus CV.

Application: copying/buffering of CV, gate and audio signals.
Read more
 5 in stock $51.62
Click for better price!
or call +44 20 7424 1960
quote 751720
EBS MIDI-58 BlueDot 5p Flat MIDI Cable (58cm)
EBS
Cat: 783266 Rel: 13 Jul 20
 
MIDI cable
Notes: The BlueDot MIDI cables are a unique design that allows for flexible angle of the contact that is desirable when space is limited.

Flip the angle of the contact 90 degrees either way or leave it straight. A blue bracket attaches the cable to the angled positions with a click.

The flat cable design fit within the EBS unmatched space-saving accessories program.

Flexible contact angle.

Flat cable design.
Read more
 More than 10 in stock $6.18
EBS Premium Gold Flat Patch Cable (28cm)
EBS
Cat: 639069 Rel: 09 Feb 17
 
Low resistance gold plated patch cable - 28cm
Notes: Space is essential when building a pedalboard. With the new Premium Gold Flat Patch Cables, EBS pushes the limits of how much space the choice of patch cables can save. The performance is improved as well, compared to EBS popular PCF-patch cables.

The tiny contact housing is made of 24 Carat Gold plated die cast Zink wrapped in a PVC sleeve for optimal protection and isolation. The flat angular double shielded cable is super flexible while wrapping the leads safely. Very low resistance and capacitance keeps your sound clean without signal loss.

EBS Premium Gold Flat Patch Cables are available in four different lengths; 10, 18, 28 and 58 cm

EBS Professional Patch cables are designed and developed by EBS in Sweden.
Read more
 6 in stock $7.96
EBS Premium Gold Flat Patch Cable (58cm)
EBS
Cat: 639070 Rel: 13 Feb 17
 
Low resistance gold plated patch cable - 58cm
Notes: Space is essential when building a pedalboard. With the new Premium Gold Flat Patch Cables, EBS pushes the limits of how much space the choice of patch cables can save. The performance is improved as well, compared to EBS popular PCF-patch cables.

The tiny contact housing is made of 24 Carat Gold plated die cast Zink wrapped in a PVC sleeve for optimal protection and isolation. The flat angular double shielded cable is super flexible while wrapping the leads safely. Very low resistance and capacitance keeps your sound clean without signal loss.

EBS Premium Gold Flat Patch Cables are available in four different lengths; 10, 18, 28 and 58 cm

EBS Professional Patch cables are designed and developed by EBS in Sweden.
Read more
 6 in stock $8.88
EBS TRS Flat Patch Cable (28cm)
EBS
Cat: 738497 Rel: 03 Jul 19
 
Flat patch cable TRS stereo, 28 cm
Notes: Stereo cable with 2 narrow angular 6.3 mm plugs.
Read more
 2 in stock $5.65
Electro Harmonix Ring Thing Single Sideband Modulator Pedal
Cat: 560449 Rel: 02 Feb 15
 
Single sideband modular effects pedal with upper and lower sideband isolation
Notes: The Ring Thing presents state of the art modulation control allowing the user to explore a new sonic world that is both familiar and inventive. Complex modulations with interactive parameters create any sound your mind can imagine. From metallic sweeps to subtle color changes to unique and limitless modulations, the Ring Thing will become your sonic dream machine.

Articulate pitch shifting, preset tuning, selectable waveforms and external control delivers sound designer mystery, with a Rock and Roll edge.

*UK 230V power adapter included*
Read more
 1 in stock $212.98
Click for better price!
or call +44 20 7424 1960
quote 560449
Electrosmith Daisy Petal Programmable Effects Pedal
Cat: 786213 Rel: 11 Sep 20
 
Programmable effects pedal
Notes: Create your own effects programs with the Petal! Simply download a working reverb, delay, or looper example, and start tweaking. Comes with Daisy installed and 9V power adapter.
Read more
MRP:$375.62 SAVE 17%
 1 in stock $313.01
Click for better price!
or call +44 20 7424 1960
quote 786213
Empress Effects Zoia Modular FX Synthesiser Pedal
Cat: 783109 Rel: 10 Sep 20
 
Synthesiser pedal
Notes: Well on its way to becoming a cult favourite already, Empress's Zoia brings modular synthesis to a compact pedal format. Create effects, synths, controllers or modules to integrate with other instruments.

Supplier's Notes:

The ZOIA is basically a modular synthesizer in pedal form. Instead of being a delay effect or tremolo, the ZOIA provides the modules necessary to build a delay or tremolo from the ground up. But since you're the one building it, you can make it do whatever you want. With the ZOIA you can build your own custom effects, synthesizers, midi controllers, and virtual pedal boards. And to make life a little easier, these modules have been created for all your standard guitar effects. So for instance, if you want a phaser, you can just plop down a phaser. You don't have to break out the textbooks to learn that they're built out of all-pass filters. (Of course, if you're a nerd like us, you can use the ZOIA to build them out of all-pass filters).

Input Impedance: >= 1M ohms
Output Impedance: 100 ohms
Frequency Response (-3dB): 10Hz - 23.4kHz
Total Harmonic Distortion: 0.22%
Dynamic Range: 105.5 dBA
Input Headroom (no pad): +0.5 dBu
Input Headroom (6dB pad): +5.7 dBu
Input Headroom (12dB pad): +10.8 dBu
Output Headroom: +16.2dBu
Power Input Connector: 2.1mm Barrel Connector
Power Input Voltage: 9V DC (center negative)
Required Current: 300mA
Height (enclosure only): 1.75"
Height (including controls): 2.625"
Length: 5.7"
Width: 3.75"
Weight: 1.5lbs
Read more
MRP:$619.58 SAVE 22%
 8 in stock $481.89
Eowave 3U 40HP Mini Eurorack Synth Module Case
Cat: 725949 Rel: 15 Apr 19
 
3U 40HP compact skiff case including PSU
Notes: The Mini Case offers 40 HP for mounting modules. A power supply is built-in.

208 mm long x 45mm deep.

PLEASE NOTE: Comes with EU 2 pin plug only - UK adapter may be required.
Read more
 2 in stock $122.63
Click for better price!
or call +44 20 7424 1960
quote 725949
Erica Synths Bassline DB01 Desktop Synthesiser & Sequencer
Cat: 753844 Rel: 17 Apr 20
 
desktop synthesiser & sequencer
Notes: No prizes for guessing that the legendary TB-303 might have been a reference point here but Erica's take on the bassline synth is definitely not just another clone. Huge synth sound and a powerful built-in sequencer.

Supplier notes:
From basslines and rave sounds to massive drones and drums - the Erica Synths Bassline DB-01 synthesizer lets you explore new territories of sound and performance techniques and go from a melody to noise and back in no time. The DB-01 packs analogue Erica Synths signature sound engine with an advanced sequencer on top of it.

Read more
 2 in stock $503.40
Erica Synths Black HADSR Envelope Generator Black Series Module
Cat: 780441 Rel: 23 Jun 20
 
Envelope generator module
Notes: Erica Synths Black HADSR Envelope generator is a feature-rich yet easily operated five stage envelope generator. If you wish to add more versatility, you can use it with the Black CV Expander.

Erica Black series are high-end modules with unique functionality. Only the highest quality components are used and all inputs and outputs are protected against undesired overvoltage. When designing the Black Series, design and usability were the highest priority. Big knobs are assigned to functions that make difference in sound. Together the Erica Black series are a range of modules that make an entire synthesizer.

Technical specifications:

Sustain level: 0 - +10V
Hold time: 0 - 2''
Attack time: 0 - 2''
Decay time: 0 - 0,5''
Release time: 0 - 5''
Power consumption: +25mA, -15mA
Module width: 12HP
Module depth: 25mm
Read more
MRP:$269.78 SAVE 44%
 1 in stock $151.67
Click for better price!
or call +44 20 7424 1960
quote 780441
Erica Synths Black Hole DSP v2 Module
Cat: 690950 Rel: 25 Oct 18
 
Stereo effects processor - 16HP
Notes: Erica Synths Black Hole DSP 2, an updated version of Black Hole DSP features 24 custom effects, designed in close co-operation of Erica Synths team rider KODEK and creator of SpinCAD software Gary Worsham. Each effect has 3 manually and CV controllable parameters, manual and CV control over sampling frequency for spanning from 48kHz to really Lo-Fi crunchy sound and full analogue dry/wet control. All effect parameter settings can be saved to the memory and instantly recalled with the effect, which makes Black Hole DSP II ideal for live performances.
Read more
 1 in stock $294.73
Erica Synths Black PFL Expander Black Series Module
Cat: 780437 Rel: 23 Jun 20
 
Series module
Notes: Erica Synths Black Pre-fade Listen Expander is a satellite module for Erica Synths Black Stereo Mixer.

Since modular performances are often about uncertainty, unpredictability and sudden filter resonance screams that can kill loudspeakers, it's good to know what is it that you are about to fade into your modular mix and this is where the Black PFL Expander comes in! You can monitor each of four Black Stereo Mixer inputs or any combination of them before mixer level knob takes effect.

NB: Black PFL Expander is designed to work with both Erica Synths Black Stereo Mixer V2 and V3. The module doesn't have a PSU connector therefore it can not be used on it's own.

Technical specifications:

Power consumption:+15mA, -7mA
Module width: 12HP
Module depth: 25mm
Read more
MRP:$111.01 SAVE 44%
 1 in stock $62.38
Click for better price!
or call +44 20 7424 1960
quote 780437
Erica Synths Drum Mixer Drum Series Module (black)
Cat: 702204 Rel: 19 Oct 18
 
Dedicated drum mixer with a compressor - 14HP
Notes: Erica Synths Drum Mixer with extended headroom and a dedicated drum compressor of unique design keeps each drum sound clearly distinguishable and adds power to the final mix. Bonus feature - effects send output allows to apply external effects to the signals on the first three inputs. LEDs next to each input give visual feedback on the signal level.
Read more
MRP:$247.83 SAVE 20%
 1 in stock $197.92
Erica Synths Drum Series Bassline Analogue Synth Voice Module
Cat: 690948 Rel: 19 Sep 18
 
Synth voice module for ultimate acid basslines - 14HP
Notes: Erica Synths Bassline is fully analogue synth voice module for ultimate basslines and leads.

It features AS3340 VCO with three waveforms, a filter inspired by Erica Synths Acidbox and unique features - transistor based suboscillator and two BBD lines that emulate VCO detune creating a sound of massive polysynth from one oscillator.

Accent provides more expression to the bassline, by adding volume and opening the VCF slightly.
Read more
 1 in stock $294.73
Erica Synths Drum Series Dual FX Module (black)
Cat: 690947 Rel: 01 Nov 18
 
Two Spin FV-1 chips in one module, each filled with eight custom effect programs
Notes: To add some space to your compositions and nuances in sound design Erica Synths Dual FX module brings you two identical sections of 8 custom effects with two adjustable and CV controllable parameters.

Dual FX combines two Spin FV-1 chips in one module, each filled with eight custom effect programs with two adjustable and CV controlled parameters per effect and analogue dry/wet circuit. All parameter settings can be saved with the effect and recalled instantly during the performance. Also the output of the first FX section is normalised to the second input so creating huge layers of effects is easy.
Read more
 1 in stock $276.44
Erica Synths Drum Series Link Attenuater Module
Cat: 712715 Rel: 10 Dec 18
 
5 x attenuator for bridging Eurorack & desktop mixers - 6HP
Notes: LINK is the module that bridges Eurorack to destop mixers - it has 5 sections that attenuate Eurorack signals to line level signals and sends them to 6.3mm jacks for quality connection to the mixer.
Read more
 1 in stock $59.16
Click for better price!
or call +44 20 7424 1960
quote 712715
Erica Synths Drum Series Modulator Modulation & Pitched Noise Source Module
Cat: 712706 Rel: 10 Jan 19
 
Drum modulator featuring two independent modulation/pitched noise sources
Notes: Erica Synths Modulator is an advanced modulation and pitched noise source with focus on rhythmic (but not limited to) compositions in mind. It features two identical syncable to the BPM LFOs/noise sources with selectable morphing waveshapes. LFO frequency can be manually adjustable, as well as they provide frequency divisions and multiplication in Sync mode. Each LFO has two outputs- main one and secondary one with adjustable phase, so you can create evolving modulations. Furthermore, LFOs can be linked to work at the same frequency and the first LFO has built in VCA to control output signal amplitude.
Read more
 1 in stock $212.98
Erica Synths Fusion VCA V2 Fusion Series Module
Cat: 780433 Rel: 23 Jun 20
 
Fusion series module
Notes: The core of Fusion VCA is a Russian miniature pentode 1>24B with power consumption comparable to an LED.

Unique audio and tube control circuits have been developed so Fusion VCA sounds like nothing you've heard before.

Feedback adds harmonics to the original signal and acts similar to cutoff knob on VCFs and Deform knob controls amount of distortion in germanium diodes based circuit.

All Fusion modules by default are configured to work with regular eurorack PSU.

Due to the fact that the cold tube heaters have lower resistance, Fusion modules have significant power consumption peak at startup, when power consumption almost doubles for 1-2 seconds. This is not a problem with linear PSUs that have power inertia, but may cause switching PSU internal protection turn off the power supply. Please make sure your PSU has some headroom before installing multiple Fusion modules.

Erica Synths Fusion series modules are designed combining vacuum tubes and semiconductors therefore they bring warm, powerful sound and overdrive possibilities of vacuum tubes into your modular system. Erica Fusion series consist of range of modules used in sound shaping circuit - VCO, Mixer, real Ringmodulator using audio transformers and germanium diode ring, VCF, VCA and Analogue Delay/Flanger.

Audio input level: up to 20V ptp
CV input level: -10V - +10V
Signal attenuation: -80dB
Panel width: 12HP
Module depth: 35mm
Power supply: 21mA@+12V, 32mA@-12V
Read more
MRP:$330.44 SAVE 47%
 1 in stock $175.08
Click for better price!
or call +44 20 7424 1960
quote 780433
Erica Synths Fusion VCF V2 Fusion Series Module
Cat: 780435 Rel: 24 Jun 20
 
Fusion series module
Notes: Erica Synths Fusion VCF is Erica Synth's take on a four pole lowpass filter. Each side of the double triode drives signal between 2nd and 3rd stage of the filter, while germanium diodes are used to limit the output signal.

With this module you'll get an ultimately deep sounding VCF with a unique character. Ingenious resonance volume compensation circuit and filter slope selection makes it ideal for live performances. Bonus feature - 3 input mixer with dedicated mixer output. Try patching the MIX OUT into one of the mixer inputs, increase the input level until the mixer goes into self-oscillation and use the filter to alter the drone, you have! The Fusion VCF is an instrument on it's own!

All Fusion modules by default are configured to work with regular eurorack PSU.

Due to the fact that cold tube heaters have lower resistance, Fusion modules have significant power consumption peak at startup, when power consumption almost doubles for 1-2 seconds. This is not a problem with linear PSUs that have power inertia, but may cause switching PSU internal protection turn off the power supply. Please make sure your PSU has some headroom before installing multiple Fusion modules.

The Erica Synths Fusion series modules are designed combining vacuum tubes and semiconductors therefore they bring the warm, powerful sound and overdrive possibilities of vacuum tubes into your modular system. Erica Fusion series consists of a range of modules used in sound shaping circuit - VCO, Mixer, a real Ringmodulator using audio transformers and germanium diode ring, VCF, VCA and Analogue Delay/Flanger.

Technical specifications:

Audio input level: up to 20V ptp
CV input level (full cutoff span): -10V - +10V
Panel width: 14HP
Module depth: 35mm
Power supply: bipolar +-12V, eurorack standard
Eurorack PSU configuration: 35mA@+12V, 170mA@-12V

NB - start-up power consumption for few seconds is -250mA
Read more
MRP:$345.93 SAVE 54%
 1 in stock $159.19
Click for better price!
or call +44 20 7424 1960
quote 780435
Erica Synths Pico Case
Erica Synths Pico Case (synth module case)
Cat: 686700 Rel: 27 Apr 18
 
Compact enclosure designed to house Erica Synths Pico modules
Notes: Small desktop enclosure for Eurorack modules with 42 HP space and a maximum depth of 32mm. A relatively strong power solution with an external power supply and an on/off switch located at the case is included.

The power supply provides:

- 850 mA at +12V
- 850mA at -12V
- 500mA at +5V

The power distribution has 14 connectors and the case can house exactly fourteen modules from Erica's Pico Series.
Read more
 1 in stock $162.42
Erica Synths Pico Drum 2 Module
Cat: 732840 Rel: 08 Jun 20
 
drum module
Notes: Pico Drum2 is compact yet versatile percussion synthesizer in a 3 HP eurorack module. It features 8 drum synthesis algorithms created to deliver distinct sounds to your modular system. Each algorithm offers a lot of flexibility therefore a big sounding bass drum and a squelchy snare can be dialled in within the same algorithm. It also tracks 1V/Oct and all parameters can be mapped to the CV1 input.

Technical specifications:
Output level: 10Vptp
CV level (full span): -5V - +5V
Power consumption: +28mA, -5mA
Module width: 3HP
Module depth: 35mm
Read more
MRP:$166.51 SAVE 20%
 1 in stock $133.38
Erica Synths Pico Input Module
Cat: 686624 Rel: 30 Apr 18
 
External device input module - 3HP
Notes: Erica Pico INPUT module is just what you need to interface your modular system with external synths or even your mp3 player or mobile phone.

It boosts external signal to modular synth signal level.

With the Pico Input, line signals from, for example, a synthesizer, drum-computer, audio interface or smartphone can be raised to modular level. The module delivers up to 40 dB of gain. Thanks to its two channels, users can comfortably process mono as well as stereo material.

The Pico Input comes equipped with two signal paths. Each signal path features an audio input, a volume potentiometer and an output. Up to 40 dB of amplification are available. Using jumpers on the circuit board, it is possible to dampen the maximum gain to 20 dB. The module's first input is a stereo jack, meaning the user can connect a smartphone or tablet without any adapter cables. In this case, incoming signals are distributed internally to both channels.
Read more
 1 in stock $77.44
Click for better price!
or call +44 20 7424 1960
quote 686624
Erica Synths/Gamechanger Audio Plasma Drive High Voltage Distortion Module
Cat: 718794 Rel: 18 Apr 19
 
Distortion module with Plasma technology - 16HP
Notes: Gamechanger Audio is a Latvian company committed to exploring the uncharted territories of music electronics and creating devices that provide real value while stretching the imagination of both musicians and engineers. In their Plasma Pedal they managed to combine Tesla coil with a lots of Rock and Roll and the result is one of the worlds heaviest sounds with plenty of unique features and the potential to become the new standard of distortion.

Similar to the Plasma Pedal, Plasma Drive gives you a new and previously unexplored method of achieving signal clipping in 16HP. Instead of using LED circuits, transistors or vacuum tubes to produce overdrive, the Plasma Drive boosts audio signal to 3000V and transforms it into a series of continuous high-voltage discharges in a xenon-filled tube. In essence - you are playing a lightning bolt of electricity, and the electrical discharges produced by your instrument are instantly converted back into an analogue audio signal, producing a quick, responsive, and extremely heavy distortion with tons of unique character!

The Eurorack module Plasma Drive brings sounds of the Plasma Pedal to the next level. As per Eurorack standards we added CV control over distortion level and dry/wet mix, as well as octave up and 1 and 2 octaves down tracking oscillators that add even more harmonics to the original signal. Tracking oscillators can be switched on/off manually or via trigger signals. The Plasma Drive module is powered via conventional Eurorack PSU ribbon cable and the power consumption is around 150mA.
Read more
 1 in stock $314.09
Eventide Euro DDL Delay Module
Cat: 698312 Rel: 08 Aug 18
 
Digital delay effects module for Eurorack - 16HP
Notes: A Digital Delay with an Analogue Soul for Eurorack:

Designed for performance, the EuroDDL features external control of every feature and function. It also has been designed to sound less digital than the average delay. Eventide's old school design strictly limits the amount of digital circuitry to only what's required for delay. Soft saturation clipping, low pass filter, feedback, insert loop, and +20 dB boost are all analogue. Once you hear it, you'll know why this is the ultimate, most musical, Eurorack delay. To be a true performance instrument, all the controls of the Eurorack module must be remote controllable. The EuroDDL does just that with jacks to accept control voltages and triggers. It's designed to be played as an instrument. And, it's designed to 'play nice' in the rack with Return/Send and Clock In/Clock Out.

Built on History from the Originators:

This Eurorack delay is well steeped in history. Its ancestry dates back to 1971 when we created the world's first 1745 Digital Delay Line. Back then, everything in audio was analogue except delay, which is why our original delay line was used to synch the audio feeds to the speaker towers at the legendary 1973 Watkins Glen concert. Now that history has been updated to breathe life into your Eurorack. It's the perfect companion for synthesis and any other instrument.
Read more
MRP:$631.20 SAVE 28%
 1 in stock $455.33
Faderfox Micromodul EC4 Encoder USB MIDI Controller
Cat: 755387 Rel: 09 Dec 19
 
Universal controller for many types of MIDI controllable hard- and software
Notes: Really versatile little MIDI controller designed to add hands-on control to software and even hardware. 16 push-button rotary encoders plus function buttons and OLED display.

Supplier's notes:
This all-rounder has 16 gridless push-encoders, 7 function buttons and a large OLED-display. Encoders are switchable to 16 groups that allow controlling a total of 256 control parameters per setup. The display shows the current values of all controls or editable encoder/group/setup names. Various kinds of MIDI commands are possible, like program change, pitch bend, aftertouch, NRPN, and control change in relative and absolute mode with different acceleration amounts. All these properties are easily and efficiently programmable on the device, allowing personalized customisation for each separate control.

The encoders can work as high resolution 14bit controllers too (NRPN, control change or pitch bend). This makes them suitable for sensitive parameters like resonating filter cutoffs, etc.

Use the internal 16 setups to save your individual settings. Backup and restore of all settings by SysEx dumps are possible too.

The factory settings are perfect to control music and video software products out of the box. Thus, any additional device programming isn't necessary for many applications.

The little box is also a great extension for your Ableton Live setup. There you can control all the continuous parameters like track volumes, rack macros, send amounts, and track pannings. A special control surface script for Ableton Live, including all necessary mappings, is enclosed in the package.

Working with this amazing power box will prove to you that it is a trustworthy, reliable, and invaluable asset to your productions.
Read more
 More than 10 in stock $275.37
Faderfox Micromodule UC4 Universal MIDI Controller
Cat: 563495 Rel: 08 Jun 15
 
Universal MIDI controller unit for use with all MIDI-controllable hardware and software
Notes: The all-rounder has 8 push-encoders without detents, 9 faders and 8 buttons, all switchable to 8 controller groups that allow to control a total amount of 264 control parameters. A 4-digit-display and 8 leds show the current values of all controls.

Various kinds of MIDI commands like program change, pitchbend, aftertouch and control change in relative and absolute mode with different acceleration amounts are possible. All these properties are fully programmable on the devices very fast and easy for each control separately.

The encoders can work as high resolution 14bit controllers too (control change or pitchbend) which makes them suitable for sensitive parameters like resonating filter cutoffs or similar things.

Use the internal 18 setups to save your individual settings. Backup and restore of all settings by sysex dumps is possible too.

The factory settings are perfect to control music and video software products out of the box if they are freely assignable. So any additional device programming isn't necessary for many applications.

The little box is also a great extension for your Ableton Live setup.

There you can control all the continues parameters like track volumes, rack macros, send amounts, track pannings and switchable patameters like clip launch/stop, mute, solo, rec arm, monitor and track select. A special control surface script for Ableton Live 8/9 with all necessary mappings is enclosed in the package. With that script you can also use two UC4 devices to control up to 16 tracks simultaneously.

Check out this amazing power box and you will get a reliable mate...
Read more
 4 in stock $230.19
Frap Tools 321 Scale, Flip, Shift & Combine Module
Cat: 673008 Rel: 13 Dec 17
 
Compact three channel utility module for every patch - 6HP
Notes: The 321 includes the most useful functions we always need in every patch, to edit and combine dynamically the signals in use.

It is composed of three identical sections, the red, yellow and green, where each of those is capable of scaling any signal, from 0 up to 2 times (+6dB), flip its phase, and apply a DC offset, allowing to shift your audio or CV up or down.

In case no signals are connected to the section input, the offset may act as a CV source too.

The three sections are then summed together into two independent summing stages: the top right jack outputs the sum of all three sections, while the top left outputs the sum of the unconnected sections only (semi-normalled).

The 321 is entirely DC coupled, allowing the process of control voltages as well as audio signals.

In case CV's or audio signals are particularly hot, the two 6dB attenuators, one per each summing section might be helpful to reduce exactly by 50% the incoming signals.
Read more
 3 in stock $94.65
Click for better price!
or call +44 20 7424 1960
quote 673008
Hosa CSS804 8 Way 1/4" TRS Jack Balanced Snake Cable Loom (4m)
Cat: 708813 Rel: 30 Oct 18
 
1/4" TRS to same - 4 metre length
Notes: This snake is designed to interconnect pro audio gear with balanced phone jacks. It is ideal for use with mixing consoles and patch bays. Features include:

- Nickel-plated plugs for rugged durability and efficient signal transfer
- Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
- OFC spiral shields for effective EMI and RFI rejection and flexibility
Read more
 1 in stock $46.25
Click for better price!
or call +44 20 7424 1960
quote 708813
IK Multimedia iKlip 3 Universal Mic Stand Mount For Tablets
Cat: 706857 Rel: 26 Oct 18
 
Universal tablet mount for mic stands
Notes: Easily mount any tablet to a microphone or music stand. Fits tablets from 7" to 12.9" in portrait or landscape orientation, with or without case. Perfect for sheet music, lyrics, chord charts or performance apps. Soft-touch rubber pads hold tablet securely without scratching or marring. Ball joint connection provides easily adjustable viewing angle. All ports and controls remain freely accessible. Made from rugged thermoplastic for reliable performance. Designed in Italy.

- Re-designed and re-engineered from the inventors of tablet stage support
- Quick-attach clip for faster connection of mounting bracket
- Instant 360 degree rotation of the mounting bracket for improved positioning
- New mounting support for iRig accessories
- Larger, more durable rubber grips
- Improved fit for iPad Pro
Read more
 1 in stock $52.70
Click for better price!
or call +44 20 7424 1960
quote 706857
IK Multimedia Z Tone Active DI Box
Cat: 763095 Rel: 18 Jun 20
 
direct input box
Notes: The Z-TONE DI is a premium active direct box packed with unique new features. Whether you want more flexible routing on-stage or superior tone shaping in the studio, Z-TONE DI borrows the input circuits from our award-winning AXE I/O interface to let you do a whole lot more, and sound better doing it.

First and foremost, Z-TONE DI is designed to preserve the natural tone of your instrument. With exceptional 114 dB(A) dynamic range and extended 3 Hz - 30 kHz (+/- 1 dB) frequency response, whether it's for long cable runs on stage, or to capture DI tracks in the studio, Z-TONE DI ensures every nuance and detail is carefully maintained.

And Z-TONE DI is made in IK's Modena factory and packed in a rugged metal housing for years of reliable performance.

Z-TONE DI offers a high-quality instrument preamp with exceptionally low noise and wide frequency response, and multiple circuit topologies to adapt to any type of guitar, pick-up and style.

Guitar pickups can dramatically change their character depending on the impedance of your preamp. That's why the tone and responsiveness of your guitar can change when plugging into different gear.

Z-TONE DI puts you in control, with the same variable impedance control as our award-winning AXE I/O audio interface. Dial in impedance from 1 MOhm to 2.2 kOhms to shape your sound In unique ways. At the maximum impedance, you'll find your sound tighter, sharper and more precise. Increase the load and the sound becomes thicker and more bold.

You'll quickly find yourself using this to give your guitars even more sonic character, dialing in sound that fits beautifully into the mix without the need for EQ.

Z-TONE DI offers a range of useful output options. First, the balanced XLR output offers a switchable ground lift, to eliminate noise and hum caused by ground loops. An unbalanced 14" output offers additional flexibility.

Z-TONE DI also offers a Hi-Z Link out, which mirrors the input signal to connect to pedals and amps. This lets you easily record DI tracks alongside your real amp's tone in the studio, or blend direct & amp sounds live on stage for even more sonic flexibility.

And an optional 20 dB pad extends the useful range of the unit, letting you use instruments and sources aside from guitar & bass. Many keyboards, synths and more still benefit from Z-TONE's unique PURE / JFET circuits and ground lift feature, for flexible routing and tone shaping.

Z-TONE DI runs off a 9V battery for easy portability, but can also be powered by +48v phantom power from your mixer or interface to run longer sessions without worries.
Read more
 1 in stock $145.20
Intellijel Rubicon 2 Thru Zero FM Triangle Core VCO Module
Cat: 677565 Rel: 29 May 18
 
Mark II version of the Rubicon triangle core VCO module
Notes: Intellijel has made the already awesome Thru Zero VCO Rubicon even better! In addition to the seven waveforms plus sub-oscillator of the first version, the second generation offers a new Warp stage, which generates a hybrid of complex pulse and other waves - you can even use external audio material. In order to keep results in the range of 10 Vpp, there is a wave folder called Squish. On top, the FM capabilities were expanded.
Read more
 2 in stock $390.47
Korg Minilogue Soft Case
Korg Minilogue Soft Case (equipment case)
Cat: 629995 Rel: 25 Oct 16
 
Dedicated soft case for the Minilogue
Notes: This is a dedicated soft case, perfect for transporting the Minilogue. The iconic slant-design fits the body of minilogue comfortably with a generous layer of cushioning. The exterior of the SC-MINILOGUE is made of durable tarpaulin and features a handy pocket for holding cables. It also includes a strap for carrying by hand, on your shoulder, or as a backpack.
Read more
 1 in stock $74.65
Click for better price!
or call +44 20 7424 1960
quote 629995
Artikel 1 bis 50 von 101 auf Seite 1 von 3 anzeigen
1  2  3  »

Filter

Back In Stock: Studio Equipment
Back in stock period
Release Date
Close