Back catalogue: Studio Equipment

Notes: Your AKAI deserves to be in a comfortable position to enjoy it. That is why CoverUp have designed this stand so that in your studio, you have the best ergonomics and can make music without thinking about anything else.

Notes: Designed specifically for the Akai MPC Live, this stand offers a comfortable and ergonomic position for your equipment.

Crafted with two feet connected by 6mm rods to provide enhanced stability, ensuring your MPC Live stays securely in place.

Assembling the stand takes only seconds, and it weighs just a few grams, making it perfect for musicians who use their MPC Live for live performances.

To protect your MPC Live and prevent slippage, the stand includes silicone feet that prevent scratching and sliding.

Introducing the MPC Live Stand - the ultimate accessory for your Akai MPC Live. Elevate your performance and experience with this specially designed stand that combines comfort, stability, and convenience.

With its ingenious construction featuring two feet connected by sturdy 6mm rods, this stand guarantees rock-solid stability for your MPC Live. Say goodbye to wobbling or shifting during intense performances, allowing you to focus on creating music with confidence.

Setting up the stand is a breeze. In just a matter of seconds, you can assemble it effortlessly, thanks to its smart design. Plus, its lightweight construction ensures that you won't be burdened by unnecessary weight when on the go, making it an essential companion for live gigs and studio sessions.

It is important that you protect your precious MPC Live. That's why the stand includes high-quality silicone feet, meticulously designed to prevent any scratches or slips. Your MPC Live will stay in pristine condition, ready to perform at its best whenever you need it.

Choose the MPC Live Stand and take your music production to new heights. Elevate your setup, enhance your comfort, and unleash your creativity with this must-have accessory.

Weight: 0,5 kg
Dimensions: 10 × 10 × 10 cm

Notes: Your AKAI deserves to be in a comfortable position to enjoy it. That is why CoverUp have designed this stand so that in your studio, you have the best ergonomics and can make music without thinking about anything else.

Notes: The double stand is intended to house two Behringer synthesizers, with the ability to improve the operating position on both.

At the same time, it saves a lot of space on the surface, ideal for optimizing the space in our studios.

The stand includes rubber feet so it won’t scratch or slip.

It is compatible with Model D, K2, Pro 1, Neutron, Cat, Wasp

Notes: If you have Behringer TD3 machines in your studio, this is the ideal stand.

Designed and designed exclusively for the Behringer TD3, it may be more comfortable, more spacious and maintains your equipment 100% safe and stable.

All our supports, keep adherent feet 3m behind them so that the support does not loosen.

Notes: The model 230 double support is designed to house two large pieces of equipment, with the ability to improve the operating position of both.

In each position of the bracket, a 30cm piece of equipment can be placed. deep, such as Maschine MK3 and Maschine Jam.

This double support in turn allows it to be used as two simple supports. Simply unscrew the front half from the back.

At the same time, it saves a lot of space on the surface, ideal for optimizing the space in our studios.

The width is adjustable according to the length of the rods that join both halves.

The support includes rubber feet so that it does not scratch or slip and the screws for its assembly.

Notes: This specially designed stand for Elektron Digitakt / Digitone is attached from below to the equipment’s chassis, utilizing its universal VESA mounting points, enabling the use of the equipment in a much more ergonomic inclined position.

By swapping the position of the feet, it is possible to use the equipment in two different positions: lying down and upright.

It can be set up in a matter of seconds and weighs just a few grams.

Each stand features a groove to accommodate silicone feet to prevent the equipment from slipping or scratching.

Includes both side stands, screws for installation, and silicone feet.

Notes: ELK (Elektron Leveling Kit) is a set of stands designed to match the height and angle of various generations and models of Elektron devices.

The MK2 series (RYTM and A4) features an incline, while other current models such as Digitakt, Digitone, Syntakt, and Analog Heat are flat. Additionally, we include previous generations such as Machinedrum, Monomachine, A4, RYTM, and Octatrack in this list.

With these stands, the fronts of the synthesizers are aligned at the same height and angle, creating a seamless continuation of the equipment placed beside them.

Compatible with Analog RYTM MK2 and Analog Four MK2 DIGI Stand.

Compatible with Digitakt, Digitone, Syntakt, Analog Heat (MK1 and MK2), Machinedrum, Monomachine, A4 MK1, RYTM MK1, and Octatrack (MK1 and MK2).

Each stand has rubber feet on its bottom to prevent slipping or scratching on the supporting surface.

Kit includes: X1 MK2 + X1 Digi elevate stand

Notes: Triple support for the entire Korg Volca line (Beats, Kick, Sample, FM, Keys, Bass, Drum, Modular, Mixer)

Save space in your studio and operate your synthesizers more comfortably.

The brackets fit directly into the Volca without the need for screws or moving parts. This makes them easy to transport and set up for those who go out and play with their Volca.

On the bottom, each foot has silicone legs to prevent them from scratching or slipping.

The pictures show red, but the colour is black.

For up to 3 Korg Volca devices
Made of biocompatible PLA plastic
Connection of the side parts by means of wooden rods
Dimensions (W x D x H): 196 x 246 x 271 mm

Suitable for:

Volca Beats
Volca Drum
Volca Bass
Volca Keys
Volca FM
Volca Kick
Volca Nubass
Volca Modular
Volca Sample
Volca Mix

Notes: For two Make Noise desktop units

Suitable for 0-Coast, 0-Ctrl and Strega

Made of biocompatible PLA plastic

Connection of the side parts via wooden rods

Colour: Black

Notes: Moog is synonymous with synthesizers, and we have created a triple stand for three of their latest inventions. This triple stand is designed for the Mother32, DFAM, and Subharmonicon. You can assemble the parts as a triple stand, or you can use them separately as a double stand and an elevated single stand. While these synthesizers already have a slight incline, you will see how much more comfortable it is to use them together in a column and how much space you can save on your studio table. CoverUp studied the cabinets of each device to design a stand that fits perfectly and takes advantage of each shape to add strength and stability. Spce has been left to ensure the rear connectors don't collide with the stand. All of CoverUp's stands come with 3M rubber feet to prevent scratching or slipping.

Notes: One of Native's latest creations has its ergonomic stand ready for studying.

Now you can have greater comfort, view your screen and all the equipment thanks to this custom-designed stand.

At the base, there are 3m rubber feet so that the equipment does not move at any time.

Weight: 0.1 kg
Dimensions: 5 × 5 × 1 cm

Notes: The ideal support for your three Boutique synthesizers.

To use them in a comfortable and ergonomic position, which in turn saves space.

Specially designed taking into account the need for space for wiring and rear connectors.

On the support faces, each support has a recess to place silicone feet and prevent the equipment from slipping or scratching.

Includes the two side supports, the rods and the silicone feet

Notes: Introducing the Roland Compact 3-Tier Modular Equipment Stand

Elevate your musical experience with the Roland Compact 3-Tier Modular Equipment Stand, a versatile solution designed to enhance your stage setup. Crafted with precision using cutting-edge 3D printing technology, this stand boasts a perfect blend of form and function, offering musicians a truly exceptional experience.

Key Features:

Modular Design: The Roland Compact stand features a smart, modular design, allowing you to use it either as a complete unit or as separate tiers. This adaptability ensures that your equipment setup is tailored precisely to your needs.

Eco-Friendly Materials: We're committed to sustainability! Our stand is created using eco-friendly materials, reducing its environmental impact. You can enjoy your music guilt-free, knowing that you're contributing to a greener world.

Lightweight and Portable: Musicians are always on the move, and we've got you covered. This stand is exceptionally lightweight, making it easy to transport from one gig to another. Say goodbye to the hassle of heavy gear!

Sturdy and Reliable: Despite its featherweight design, the Roland Compact stand is incredibly sturdy. You can trust it to hold your valuable equipment securely, providing you with the stability you need for a flawless performance.

Space-Efficient: With its three-tier configuration, this stand maximizes your available space. Organize your gear efficiently, so you can focus on making music without worrying about clutter.

Whether you're a solo artist, part of a band, or a live performer, the Roland Compact 3-Tier Modular Equipment Stand is the perfect choice for taking your performance to the next level. Its innovative design, sustainable production, and ease of transportation make it an invaluable addition to your musical arsenal.

Notes: ***B-STOCK: Box damaged with tears on packaging, but product is in excellent condition and in perfect working order***


Introducing the Roland Compact 3-Tier Modular Equipment Stand

Elevate your musical experience with the Roland Compact 3-Tier Modular Equipment Stand, a versatile solution designed to enhance your stage setup. Crafted with precision using cutting-edge 3D printing technology, this stand boasts a perfect blend of form and function, offering musicians a truly exceptional experience.

Key Features:

Modular Design: The Roland Compact stand features a smart, modular design, allowing you to use it either as a complete unit or as separate tiers. This adaptability ensures that your equipment setup is tailored precisely to your needs.

Eco-Friendly Materials: We're committed to sustainability! Our stand is created using eco-friendly materials, reducing its environmental impact. You can enjoy your music guilt-free, knowing that you're contributing to a greener world.

Lightweight and Portable: Musicians are always on the move, and we've got you covered. This stand is exceptionally lightweight, making it easy to transport from one gig to another. Say goodbye to the hassle of heavy gear!

Sturdy and Reliable: Despite its featherweight design, the Roland Compact stand is incredibly sturdy. You can trust it to hold your valuable equipment securely, providing you with the stability you need for a flawless performance.

Space-Efficient: With its three-tier configuration, this stand maximizes your available space. Organize your gear efficiently, so you can focus on making music without worrying about clutter.

Whether you're a solo artist, part of a band, or a live performer, the Roland Compact 3-Tier Modular Equipment Stand is the perfect choice for taking your performance to the next level. Its innovative design, sustainable production, and ease of transportation make it an invaluable addition to your musical arsenal.

Notes: The latest addition to the Roland family has its exclusive stand.

Specially designed for the Roland MC-707s.

Taking advantage of the shape of its cabinet to securely hold the equipment.

Achieving a very comfortable position during use.

These stands are lightweight, detachable, and take up very little space, perfect for live performers.

In the studio, they save space and improve the working position.

All CoverUp stands feature 3M rubber feet to prevent scratching or slipping.

With its ergonomic design, this stand provides exceptional comfort during use. Its thoughtful construction securely holds the Roland MC-707s, ensuring stability and convenience. Whether you're performing live or working in the studio, this stand offers the advantages of portability and space efficiency. The lightweight and detachable design make it easy to transport and set up wherever you go. Moreover, its compact size allows for convenient storage. Additionally, the high-quality rubber feet provide excellent grip and protect your equipment from scratches. Invest in this ergonomic stand from COVERUP for a comfortable and hassle-free experience while using your Roland MC-707s.

Notes: Durability is a key feature of this stand. We understand the demands of a busy studio environment, and we've built this stand to withstand the test of time. Its sturdy construction ensures stability and reliability, providing a secure base for your equipment. This way, you can focus on creating music with confidence, knowing that your gear is well-supported.

At the core of CoverUp's production process is the use of recycled sticky woods. By repurposing and transforming these materials into an innovative stand, we give new life to what was once considered waste. With this sustainable approach, we not only reduce the strain on natural resources but also promote a circular economy, where materials are reused and repurposed to minimize waste.

Beyond its practicality, the Stand adds a touch of elegance to your studio setup. Its sleek design and natural wood texture provide a visually appealing backdrop for your synth, elevating the overall aesthetics of your workspace. The stand seamlessly integrates with any decor style, allowing you to create a studio environment that inspires your creativity.

Keep your studio organized and optimized for productivity with the Stand. Its compact footprint and efficient design ensure that your workspace remains clutter-free, giving you the freedom to focus on your music. With everything neatly organized and within reach, you can streamline your production process and unleash your artistic potential.

Upgrade your music production setup with the Stand. Experience the perfect blend of ergonomic design, durability, and sustainability. By choosing this stand, you're not only investing in a high-quality product but also making a positive impact on the environment. Embrace the future of music production with this exceptional stand that combines functionality with sustainability.

Notes: Durability is a key feature of this stand. We understand the demands of a busy studio environment, and we've built this stand to withstand the test of time. Its sturdy construction ensures stability and reliability, providing a secure base for your equipment. This way, you can focus on creating music with confidence, knowing that your gear is well-supported.

At the core of CoverUp's production process is the use of recycled sticky woods. By repurposing and transforming these materials into an innovative stand, we give new life to what was once considered waste. With this sustainable approach, we not only reduce the strain on natural resources but also promote a circular economy, where materials are reused and repurposed to minimize waste.

Beyond its practicality, the Stand adds a touch of elegance to your studio setup. Its sleek design and natural wood texture provide a visually appealing backdrop for your synth, elevating the overall aesthetics of your workspace. The stand seamlessly integrates with any decor style, allowing you to create a studio environment that inspires your creativity.

Keep your studio organized and optimized for productivity with the Stand. Its compact footprint and efficient design ensure that your workspace remains clutter-free, giving you the freedom to focus on your music. With everything neatly organized and within reach, you can streamline your production process and unleash your artistic potential.

Upgrade your music production setup with the Stand. Experience the perfect blend of ergonomic design, durability, and sustainability. By choosing this stand, you're not only investing in a high-quality product but also making a positive impact on the environment. Embrace the future of music production with this exceptional stand that combines functionality with sustainability.

Notes: The latest addition to the Roland TR family has its exclusive stand.

Specially designed for the Roland TR-8s.

Taking advantage of the shape of its cabinet to securely hold the equipment.

Achieving a very comfortable position during use.

These stands are lightweight, detachable, and take up very little space, perfect for live performers.

In the studio, they save space and improve the working position.

All CoverUp stands feature 3M rubber feet to prevent scratching or slipping.

With its ergonomic design, this stand provides exceptional comfort during use. Its thoughtful construction securely holds the Roland TR-8s, ensuring stability and convenience. Whether you're performing live or working in the studio, this stand offers the advantages of portability and space efficiency. The lightweight and detachable design make it easy to transport and set up wherever you go. Moreover, its compact size allows for convenient storage. Additionally, the high-quality rubber feet provide excellent grip and protect your equipment from scratches. Invest in this ergonomic stand from COVERUP for a comfortable and hassle-free experience while using your Roland TR-8s.

Weight: 0,5 kg
Dimensions: 10 × 10 × 10 cm

Models: TR8S, MC707

Notes: This ergonomic stand model is specially designed for the new sampler/sequencer by Teenage Engineering. To achieve a more comfortable use of this beautiful machine, we decided to offer two possible positions: Studio and Live.

The Studio version has a higher angle and elevation, allowing it to be placed in our setup without obstructing rear connectors of other equipment. The Live version has a lower angle, and the front of the EP-133 remains at the level of the supporting surface. This facilitates its use while standing.

Both versions have silicone pads on their bottom to prevent slipping or scratching the surface where it rests. The wooden rods that connect both sides of the stand provide rigidity and stability to the assembly.

Notes: Protective cover and inclined stand. All in one piece. On one side, it's a cover that protects the OP-1, shielding keys, screen, and knobs. But leaving the side connectors uncovered, so you don't have to unplug it to cover it.

It also provides the option to use it as an inclined stand for the OP-1, simply by reversing its position. Fitting snugly around the perimeter of the synthesizer.

The cover is decorated to resemble the recording view of the OP-1.

***The OP-1 is not included, it is shown in the photos for demonstration purposes only. ***

Notes: CoverUp designed two ergonomic support models for the OP-1: Studio and Live versions.

The Studio support has a higher incline and is elevated. This is ideal for seated use, improving screen visibility, and the height allows it to be positioned even behind other desktop equipment.

The Live version of this support has a slight incline and is intended for use in a live or standing situation.

Both supports have rubber feet to prevent slipping and are adorned with two well-known characters that appear on the OP-1.

***Please note: The OP-1 is not included, it is shown in the photos for demonstration purposes only. ***

Notes: CoverUp designed two ergonomic support models for the OP-1: Studio and Live versions.

The Studio support has a higher incline and is elevated. This is ideal for seated use, improving screen visibility, and the height allows it to be positioned even behind other desktop equipment.

The Live version of this support has a slight incline and is intended for use in a live or standing situation.

Both supports have rubber feet to prevent slipping and are adorned with two well-known characters that appear on the OP-1.

Notes: The well-known Pocket Operators are essentially bare electronic boards, with the components visible.

To protect your Pocket Operator and make its use more comfortable, CoverUp offer this case, which includes a front part, a back cover, and the buttons.

This case is compatible with the entire Pocket Operator series, and its assembly is very simple.

Notes: This stand its part of a new concept in COVERUP. With differents parts, you can use to put on multiple synths, including big devices, until now, not possible with the other stands.

You can configure your setup with you like more, with two big devices, or three medium devices. Easy to ensamble, very light to move from your studio to live. Just you need 1 minute to arm and start to playing.

Your setup of synthesizers and studio equipment can change permanently and with it also the position on the work table.

Taking this into account, CoverUp developed a 3-level support, which can be set up in different ways depending on the number of machines that we are going to place and their size.

In the triple stand configuration (using all 4 parts), 3 20cm machines can be placed. deep and a maximum height of 7cm.

This space is enough for much of the hardware available today.

The triple bracket parts are assembled with screws (included) using a universal socket that holds them together firmly.

In turn each part can be used as a simple support. It is only enough to separate the parts by removing the screws and use each part as it suits us.

Each part has rubber feet underneath, so that the support does not slip and is firmly supported.

Both halves of the triple support are linked with wooden rods at various points to give it lateral stability.

The design contemplates space for the rear connectors of each equipment, so that none of them are obstructed by the support.

Measures:
Depth: 58cm
Height: 41cm
Width: 34cm

Notes: External footswitch. Accessory for Sidekick JR.

Use the XT footswitch to control the operation of the modulation section of the Sidekick JR independently. Engage or true bypass the modulation effect.

XT footswitch bypasses the onboard modulation operation assign toggle switch of the Sidekick JR.

Connect to the XT jack input of the pedal.

Passive operation - no power needed for the XT footswitch to operate properly - use standard TS instrument jacks / cable only.

XT footswitch function is not affected by the power-up bypass/engage preset function of the onboard footswitches of Sidekick JR.

Dimensions (W x L x H) : 54 x 51 x 49 mm
Weight 0.91 kg
Made in Greece

Notes: Amazing value from this little Eurorack-compatible analogue synth. Loosely Moog-inspired semi-modular East Coast subtractive design with MIDI control and great sound.

Supplier's Notes:
East Beast

Fully analogue East Coast style semi-modular synthesizer

What's the first thing you think of when you hear the word "synthesiser"? Close your eyes and think about.

Anyway, for a lot of people, the word synthesiser invokes visions of big filter cutoff knobs, envelope generators, and importantly, big fat-sounding voltage-controlled oscillators. These are the hallmarks of East Coast-style synthesis.

East Beast is a fresh take on these old-school concepts with a few beastly twists thrown in here and there.

Furthermore, you can pop East Beast out of its included enclosure and it transforms right into a 40HP eurorack module
East Beast's oscillator, designed in partnership with Pittsburgh Modular Synthesizers, is a part of their 5th generation of analogue oscillators stemming from a super-serious 10 years of continued research into analogue oscillator development.

Its circuitry is not a clone or based on any outside designs. It is made with 100% modern components. This keeps it very stable, and giving it a super rich, and unique sound.

Most of the filters you are used to hearing are transistor ladder filters or copies of transistor ladder filters. East Beast's filter is not one of those. Pittsburgh's whole goal of making this filter for East Beast was to create a filter that's creamy smooth with no dead spots, a very common phenomenon in all filters, but check it out. This one's got no dead spots. From nasally to biting and elsewhere, it's all one large sweet spot.

East Beast's filter is a multi-mode filter, meaning it can be used as a low pass filter, high pass filter, bandpass filter, or a combination of the three for an even wider sonic palate.
Shape the beast in your own image
To further sculpt the sounds Cre8audio has included an envelope generator & LFO. The custom envelope circuit creates a snappy, percussive attack for expressive performance. The dual range LFO opens up a wide range of LFO and audio rate modulation possibilities.

Get patched.
Semi-modular means that the East Beast will work without any patch cables or anything. But what fun is that? Who doesn't want to have their own personal spaghetti mess of cables sticking out of their synthesizer to get wacky with?
East Beast has basically 9 different patchable modules (Oscillator, filter, envelope, VCA, LFO, multi-mod tool, sequencer, MIDI to CV converter, and button keyboard) with a whopping 18 Eurorack compatible patch points to plug into itself and your other gear. All for your patching pleasure.

As well as this, East Beast has MIDI in and a fancy MIDI thru so you can chain multiple MIDI monstrosities together- you can plug in a MIDI controller into East Beast and do as you wish.

But wait, there's more! East Beast includes quite a few additional performance features. You can dive in and dive in with its built-in tap tempo clock, arpeggiator, and sequencer. There's a lot of opportunities to inject in some randomness too.

Specifications for when used as a eurorack module

Width when used as a module = 40hp
Depth when used as a module = 25mm
213mA power draw when running +12V rail
151mA power draw when running -12V

Input voltage range of oscillator = 0-10V

Included in the box - 1x East Beast, 1x East Beast wall-wart power supply, 5x Amazing Nazca Noodles Patch Cables, 1x 3.5mm to 5 pin MIDI Din pigtail, and love (love's presence likely, but not guaranteed)

Notes: NiftyBUNDLE is a collection of Cre8audio's most essential euro rack synth components:

Case, modules, power, MIDI to CV, and "enough patch cables to get into trouble" are all included.

The NiftyBUNDLE is made up of the following Cre8audio components:

NiftyCASE

The Cre8audio NiftyCASE is a moderately sized euro rack case with HUGE possibilities!

NiftyCASE is more than just a basic eurorack case; it provides all the power and connection possibilities you could possibly ask for. NiftyCASE offers a beefy 2A of cumulative current via its +12v -12v and +5v power rails, ideal for all your modules.

Connecting your NiftyCASE to computers or MIDI devices is a breeze thanks to the built-in MIDI to CV conversion. NiftyCASE takes either DIN-MIDI from any DIN-MIDI device or USB-MIDI from your computer and turns it into eurorack compatible CV, gate, mod, and clock signals.
NiftyCASE's DIN-MIDI thru lets you easily daisy-chain multiple NiftyCASES and easily integrate NiftyCASE with your MIDI equipment.

The NiftyCASE is the perfect size for a portable eurorack case being 84hp wide; that means NiftyCASE isn't super tiny or super huge- it's just the right size for all of the cardboard boxes they're shipped in.

Chipz and Cellz modules

Chipz is a chiptune-inspired eurorack synth module, which will take you back to the halcyon sounds of the '80s.

Cre8audio describe chips as ideal for those who speak "bleep blop". They say that Chipz is "full of heaping piles of beeps, blops, and probably some other stuff too. It's got a couple of voices and some wacky LFO junk, perfect for getting your body wobbling"

Putting all of that into language you might understand a little more, Chipz is a dual VCO and dual LFO module with each offering sine, triangle, saw, square, and noise waveforms.

Cellz is another wacky module from the deranged minds over at Cre8audio. A programmable CV touchpad where each touch segment can be tuned to 2 different CV values then played by hand, sequenced, and arpeggiated.

Box 'O' Cables & Blanking Panels

To get you up and running, the NiftyBUNDLE also comes with Cre8audio's Box 'O' Cables, allowing you to get patching and making noise straight away. The NiftyBUNDLE also includes some Cre8audio branded panel blanks to fill empty eurorack space.

Included in the NiftyBUNDLE:
NiftyCASE
NiftyCASE 15v 2.4A PSU
Chipz
Cellz
Box 'O' Cables
2x Cre8audio "8" panel blanks

Specifications:

Useable case area = 84hp
Internal depth = 55mm
Weight = 1.8kg
6.8cm x 44.6cm x 18.6cm
Range of cv out 1 = 0-10V
Range of cv out 2 = 0-10V
Voltage output gate 1 - off =0 on =5?off = 0 on = 4.65?
Voltage output gate 2 - off =0 on =5?off = 0 on = 4.65?
Voltage output mod = 1-10V
Voltage output clock - off =0 on =5
Power output for modules
+12V - 1500mA peak output**
-12V - 500mA peak output**
+5V - 500mA peak output**
1/4" ts mono output on rear
MIDI in via USB and 5 pin Din
MIDI thru via 5 Pin Din and USB

Notes: At 84hp wide the NiftyCASE isn't super tiny or super huge, in fact, it's just right for all of the cardboard boxes bought to ship it to you in. Aside from the 84hp width NiftyCASE features ample +12v -12v and +5v power for your modules. It will also take Din MIDI from any DIN MIDI device and USB MIDI from your computer and turn it into eurorack compatible CV, gate, mod, and clock.

MIDI to CV, gate, clock, and mod

It's all built into the case. Make your instrument and don't waste precious hp (space for modules) on power and MIDI tools. you can plug NiftyCASE into your computer via USB or 5pin MIDI DIN device and send it MIDI. It will convert it into CV, gate, mod, and clock. Sequence with your DAW, jam with your controllers, or do something wacky, NiftyCASE has got you covered.

Power

Built-in power saves space for more of your modules, and keeps things good and easy.

As is, you can plug up to 10 modules into NiftyCASE's 10 gang flying bus that provides a peak 1500mA of +12v, 500mA -12v, and 500mA +5v, covering all industry standard power requirements

Specs:
Useable case area = 84hp
Internal depth = 55mm
Weight = 1.8kg
6.8cm x 44.6cm x 18.6cm
Range of cv out 1 = 0-10V
Range of cv out 2 = 0-10V
Voltage output gate 1 - off =0 on =5(off = 0 on = 4.65)
Voltage output gate 2 - off =0 on =5(off = 0 on = 4.65)
Voltage output mod = 1-10V
Voltage output clock - off =0 on =5
Power output for modules
+12V - 1500mA peak output**
-12V - 500mA peak output**
+5V - 500mA peak output**
1/4" ts mono output on rear
MIDI in via USB and 5 pin Din
MIDI thru via 5 Pin Din and USB

Included in the box:

NiftyCASE
NiftyCASE switching power supply with blades for NA, EU, UK, and AU

* Please note that the right and left sides of NiftyCASE fit very flush. It is recommended to favour a module with a pcb 1mm or more narrower than it's front panel for use on the left and right sides of the case (this amount or more of tolerance is fairly common on many modules).

** The NiftyCASE power supply is designed only to power modules that are being used in the NiftyCASE. Modifying the case or using it otherwise to power external cases & external modules is not advised.

Notes: ***B-STOCK: Product has light surface marks/scratches, but otherwise in perfect working condition***


At 84hp wide the NiftyCASE isn't super tiny or super huge, in fact, it's just right for all of the cardboard boxes bought to ship it to you in. Aside from the 84hp width NiftyCASE features ample +12v -12v and +5v power for your modules. It will also take Din MIDI from any DIN MIDI device and USB MIDI from your computer and turn it into eurorack compatible CV, gate, mod, and clock.

MIDI to CV, gate, clock, and mod

It's all built into the case. Make your instrument and don't waste precious hp (space for modules) on power and MIDI tools. you can plug NiftyCASE into your computer via USB or 5pin MIDI DIN device and send it MIDI. It will convert it into CV, gate, mod, and clock. Sequence with your DAW, jam with your controllers, or do something wacky, NiftyCASE has got you covered.

Power

Built-in power saves space for more of your modules, and keeps things good and easy.

As is, you can plug up to 10 modules into NiftyCASE's 10 gang flying bus that provides a peak 1500mA of +12v, 500mA -12v, and 500mA +5v, covering all industry standard power requirements

Specs:
Useable case area = 84hp
Internal depth = 55mm
Weight = 1.8kg
6.8cm x 44.6cm x 18.6cm
Range of cv out 1 = 0-10V
Range of cv out 2 = 0-10V
Voltage output gate 1 - off =0 on =5(off = 0 on = 4.65)
Voltage output gate 2 - off =0 on =5(off = 0 on = 4.65)
Voltage output mod = 1-10V
Voltage output clock - off =0 on =5
Power output for modules
+12V - 1500mA peak output**
-12V - 500mA peak output**
+5V - 500mA peak output**
1/4" ts mono output on rear
MIDI in via USB and 5 pin Din
MIDI thru via 5 Pin Din and USB

Included in the box:

NiftyCASE
NiftyCASE switching power supply with blades for NA, EU, UK, and AU

* Please note that the right and left sides of NiftyCASE fit very flush. It is recommended to favour a module with a pcb 1mm or more narrower than it's front panel for use on the left and right sides of the case (this amount or more of tolerance is fairly common on many modules).

** The NiftyCASE power supply is designed only to power modules that are being used in the NiftyCASE. Modifying the case or using it otherwise to power external cases & external modules is not advised.

Notes: The Cre8audio NiftyCASE BigEARS is the simplest solution for expanding your modular Eurorack synthesizer, by allowing you to connect two Cre8audio NiftyCASE's together seamlessly. Elegant and classy, the BigEARS is made from wood to match the design and aesthetic of the NiftyCASE to create a cohesive look, while providing an immense amount of stability and rigidity. When two cases are connected, you'll have a huge 168HP of rack space to add to your collection that can unlock your true creative potential.

Notes: Unreal value from Cre8audio's West Pest, the more experimental sibling to the East Beast. Loosely Buchla-inspired semi-modular synthesis with built-in sequencer, MIDI control and full Eurorack compatibility.

Supplier's Notes:
West Pest

Fully analogue West Coast style semi-modular synthesizer

The cousin of Cres8audio's East Beast desktop synthesizer, West Pest is a pesty cornucopia of simple complexity.

West Coast style is typically characterized by additive derived, rich and complex sounds. Often, more traditional user interface elements are replaced by the abstract and experimental.

All that said, West Pest is actually not a deep dive into the abstract. It provides a wide array of sonic capabilities while maintaining a quick and easy workflow. You'll make fresh & inspiring sounds in a flash. West Pest's huge sonic capabilities emanate from its modest bento box-sized exterior.

You can also feel free to pop West Pest out of its enclosure and transform it right into a 40HP eurorack module, or keep it in its case and use it anywhere for your West Coast style pleasure.

West Beast's oscillator, designed in partnership with Pittsburgh Modular Synthesizers, stems from 10 long years of stoic commitment to a continuous development of analogue oscillator research and development.

Its beautiful buzzy circuitry is not a clone or based on any outside designs. It is made with 100% modern components. This keeps it very stable, and giving it a super rich, and unique sound.

Folding waves, space, time & laundry?

West Pest utilizes a custom wave folder to shape the sound. It adds additional dimensions to West Pest's already unique sounding oscillator core.

A wave folder shapes sounds differently than a filter. Instead of removing harmonics, the wave folder increases the harmonic content of the oscillator by folding the wave in on itself to create sonically rich waveforms.

West Pest's wave folder takes what traditional wave folding circuits have done for years and ups the ante, allowing the user to fold previously unfoldable waveforms.

In addition to being able to send all of West Pest's waveforms through its wave folder/shaper, you can also input external sound sources. So go ahead, get weird with it.

Sculpt west-coast style

In continuity with the whole West Coast synth vibe, West Pest has a dynamics controller as well as an LFO to further sculpt its sound.

The Dynamics Controller combines the functionality of a VCA with a low pass filter to imitate the behaviour of soundwaves in the real world by dynamically modifying the harmonic content with the volume of the sound.

Go patch yourself

Semi-modular means that the West Pest will work without any patch cables. But who doesn't want to build a magnificent web of patch cables flowing in and out of their synthesiser? Brewing up sounds the old fashion way like unwavering generations before you, one patch cable at a time is where the real magic happens.
West Pest provides access to basically 8 different modules (Oscillator, wave contour, dynamics controller, LFO, multi-mod tool, MIDI to CV converter, sequencer, and button keyboard) worth of functionality with a whopping 18 Eurorack compatible patch points to plug into itself and your other gear. Rewire West Pest's signal flow, or share your favourite elements from West Pest with any other compatible synthesisers and vice versa.

And furthermore, the West Pest has got MIDI in, and MIDI through. Connect to a DAW, controller, daisy chain, or not. West Pest has you covered, at least, MIDI-wise. There's really no better way to get West Pest integrated into a DAW environment or connect to a controller.
Get your performance on.

But wait, there's more! West Pest includes quite a few additional performance features. You can dive in with its built-in tap tempo clock, arpeggiator, and sequencer. There's a lot of opportunities to inject in some randomness too.

Specifications for when used as a eurorack module
Width when used as a module = 40hp
Depth = 25mm
250mA power draw when running +12V rail
190mA power draw when running -12V

Input voltage range of oscillator = 0-10V

Included in the box - 1x West Pest, 1x West Pest wall-wart power supply, 5x Amazing Nazca Noodles Patch Cables, 1x 3.5mm to 5 pin MIDI Din pigtails and pizzazz (pizzazz's presence not guaranteed)

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Unreal value from Cre8audio's West Pest, the more experimental sibling to the East Beast. Loosely Buchla-inspired semi-modular synthesis with built-in sequencer, MIDI control and full Eurorack compatibility.

Supplier's Notes:
West Pest

Fully analogue West Coast style semi-modular synthesizer

The cousin of Cres8audio's East Beast desktop synthesizer, West Pest is a pesty cornucopia of simple complexity.

West Coast style is typically characterized by additive derived, rich and complex sounds. Often, more traditional user interface elements are replaced by the abstract and experimental.

All that said, West Pest is actually not a deep dive into the abstract. It provides a wide array of sonic capabilities while maintaining a quick and easy workflow. You'll make fresh & inspiring sounds in a flash. West Pest's huge sonic capabilities emanate from its modest bento box-sized exterior.

You can also feel free to pop West Pest out of its enclosure and transform it right into a 40HP eurorack module, or keep it in its case and use it anywhere for your West Coast style pleasure.

West Beast's oscillator, designed in partnership with Pittsburgh Modular Synthesizers, stems from 10 long years of stoic commitment to a continuous development of analogue oscillator research and development.

Its beautiful buzzy circuitry is not a clone or based on any outside designs. It is made with 100% modern components. This keeps it very stable, and giving it a super rich, and unique sound.

Folding waves, space, time & laundry?

West Pest utilizes a custom wave folder to shape the sound. It adds additional dimensions to West Pest's already unique sounding oscillator core.

A wave folder shapes sounds differently than a filter. Instead of removing harmonics, the wave folder increases the harmonic content of the oscillator by folding the wave in on itself to create sonically rich waveforms.

West Pest's wave folder takes what traditional wave folding circuits have done for years and ups the ante, allowing the user to fold previously unfoldable waveforms.

In addition to being able to send all of West Pest's waveforms through its wave folder/shaper, you can also input external sound sources. So go ahead, get weird with it.

Sculpt west-coast style

In continuity with the whole West Coast synth vibe, West Pest has a dynamics controller as well as an LFO to further sculpt its sound.

The Dynamics Controller combines the functionality of a VCA with a low pass filter to imitate the behaviour of soundwaves in the real world by dynamically modifying the harmonic content with the volume of the sound.

Go patch yourself

Semi-modular means that the West Pest will work without any patch cables. But who doesn't want to build a magnificent web of patch cables flowing in and out of their synthesiser? Brewing up sounds the old fashion way like unwavering generations before you, one patch cable at a time is where the real magic happens.
West Pest provides access to basically 8 different modules (Oscillator, wave contour, dynamics controller, LFO, multi-mod tool, MIDI to CV converter, sequencer, and button keyboard) worth of functionality with a whopping 18 Eurorack compatible patch points to plug into itself and your other gear. Rewire West Pest's signal flow, or share your favourite elements from West Pest with any other compatible synthesisers and vice versa.

And furthermore, the West Pest has got MIDI in, and MIDI through. Connect to a DAW, controller, daisy chain, or not. West Pest has you covered, at least, MIDI-wise. There's really no better way to get West Pest integrated into a DAW environment or connect to a controller.
Get your performance on.

But wait, there's more! West Pest includes quite a few additional performance features. You can dive in with its built-in tap tempo clock, arpeggiator, and sequencer. There's a lot of opportunities to inject in some randomness too.

Specifications for when used as a eurorack module
Width when used as a module = 40hp
Depth = 25mm
250mA power draw when running +12V rail
190mA power draw when running -12V

Input voltage range of oscillator = 0-10V

Included in the box - 1x West Pest, 1x West Pest wall-wart power supply, 5x Amazing Nazca Noodles Patch Cables, 1x 3.5mm to 5 pin MIDI Din pigtails and pizzazz (pizzazz's presence not guaranteed)

Notes: Crescendo Music 20 is designed specifically for concert goers and music enthusiasts. The acoustic mesh filters of the Crescendo Music 20 provide full frequency, enjoyable audio, reduced to safe listening levels.

Music levels at concerts exceed the safe limit of 85 dB. Sound levels beyond this can induce hearing damage like tinnitus or long term hearing loss. Crescendo Music 20 makes it safe to listen to for up to 8 hours to music as loud as 105 dB.

The advanced technology membrane filter design from Dynamic Ear Company provides an open air passage to the ear, minimising occlusion effect (low frequency emphasis) while keeping the ear ventilated for optimum comfort. Designed primarily for music applications Music ear plugs are also suitable for any noisy environments protection applications.

Crescendo Music 20 Ear Plugs package contains:
Two Large universal ear plugs
Two Medium universal ear plugs
Two acoustic filters providing 20 dB average damping which are 100% acoustically tested
Aluminium key-ring carrying case
Manual EN, FR, DE, IT, ES and NL

Weight: 0.040kg
Dimensions: 16 x 9 x 2.25cm
Eartip colour: Transparent
Eartip size: Medium, Large
Filter type: -20db average dampening

Notes: Male 3.5mm (1/8") TRS to Female 5-pin DIN adapter.

This adapter cable will connect the Organelle M's TRS-MIDI In or Out ports to another device with a 5-pin DIN MIDI port.

This adapter cable is TRS-MIDI Type A as set by the MIDI Manufacturers Association. Type A is the adopted standard of the MMA.

Overall length: 10.25" (~26cm)

Notes: A standalone instrument to get you into the world of analogue synthesis. Hand-built, simple to use and capable of some excellent drones and tones. Just add headphones.

Supplier's Notes:
OVUM is where you start: a standalone all-analogue tool for exploratory sound synthesis - all you need to start creating is headphones.

OVUM is designed for exploring pure tones, drones, and microtonal sound textures. Five independently controlled triangle-core oscillators give you five lush voices to layer and evolve. Each voice has a separate control for volume, pitch, and tone, and can be switched between a bright square wave and a crisp triangle wave.

OVUM is hand-built from 100% analogue circuitry, with no digital components, screens, quantization, or key-combinations to memorize - everything is immediate and at your fingertips.

OVUM is enclosed in a beautiful and sturdy wood and aluminum case that feels as good in your hands as it looks on your tabletop.

OVUM has a USB-C port for power, and a single 3.5mm audio output jack for headphones or line-out to connect to an amplifier, audio interface, or effects.

To reduce waste, by default OVUM comes with just the instrument and a USB to USB-C power cable. If you don't have a spare USB power supply, they can be added to your purchase at checkout. OVUM is portable, but does not contain a battery. It can be powered by any USB powerbank.

Notes: Special edition of one of our favourite 303 clones. Fully analogue tribute to the Roland original with incredible sound. Authentic acid at a very nice price.

Supplier's notes:
A full analog synth clone of the famous TB303, coming with a lot of new features and improvements, from the sound point of view as well as the ergonomics of the machine and the sequencer.

A new design, new pots very smooth, new features for Live jam, 2 new sequencer modes for even more creativity, added CV / Gate (and even more) outputs to play your favorite synths !

The design of the analogue circuit (composed of 1 VCO) and the audio engine has been improved compared to the previous version, giving it a warm and groovy sound thanks to the addition of the Shuffle (not present on the original) .

The very intuitive sequencer takes on the original spirit while bringing new and unique features such as Mute and Hammer, which gives it a great flexibility for live jam and more sound variations, as well as 2 new sequencer modes to create New patterns.

Notes: Red version of Cyclone's excellent bass synth, replicating the sound of the iconic Roland TB-303. Fully analogue synth with modernised sequencer and classic acid sound.

Supplier's Notes:
A full analogue synth clone of the famous TB303, coming with a lot of new features and improvements, from the sound point of view as well as the ergonomics of the machine and the sequencer.

A new design, new pots very smooth, new features for Live jam, 2 new sequencer modes for even more creativity, added CV / Gate (and even more) outputs to play your favourite synths!

The design of the analogue circuit (composed of 1 VCO) and the audio engine has been improved compared to the previous version, giving it a warm and groovy sound thanks to the addition of the Shuffle (not present on the original).

The very intuitive sequencer takes on the original spirit while bringing new and unique features such as Mute and Hammer, which gives it a great flexibility for live jam and more sound variations, as well as 2 new sequencer modes to create New patterns.

Specifications

Bass Bot TT-303

VCO

Monophonic
Waveforms: Sawtooth or Square
Frequency Range: 20Hz-850Hz

Main Controls

Tempo Knob
Volume Knob
Track/Pattern Bank Selector Knob
Mode Selector Knob
Power On/Off Switch

Audio Controls

Tuning Knob
Filter Cutoff Frequency Knob
Filter Resonance Knob
Filter Envelope Modulation Amount Knob
Filter Envelope Decay Knob
Accent Amount Knob
Waveform Selector Switch

Data Storage

User Patterns: 432 (9 banks of 48 patterns)
Pattern Lab Patterns: 108 (9 banks of 12 patterns)
Preset Patterns: 108 (9 banks of 12 patterns)
User Tracks: 9

Operating Modes

Pattern Write | Loop Edit |Pattern Lab | Arpeggiator
Pattern Play | Preset | Track Play | Track Write | MIDI

Per-step Modifiers

Down Octave | Up Octave | Accent | Slide
Mute | Hammer | Rest / Tie

Pattern Features

Pattern Length: 1-64 steps
Per-step modifier assignment
Time scales: 16th note, 32nd note, 8th note triplet,
16th note triplet
Assignable pattern LED color
Pattern Copy / Paste functions
Intelligent procedural pattern generator
Pattern-based Arpeggiator
Pattern Mutate function

Track Features

Visual track programming system
Maximum Length: 144 bars | Per-bar transpose option

Global Features

Shuffle Amount | Slide Time | Gate Length |
Illuminated buttons: 26
Tap Tempo Input | Automated VCO calibration |
System LED colour |
MIDI In / Out channels

Outputs

Main Mix (1/4" mono, +15dBu)
Headphone (1/4" stereo, +10dBu)
VCO Waveform (1/8", Sawtooth: 5Vp-p, Square: 3.7Vp-p)
Control Voltage (1/8", 1V/octave, range 1V 5V)
Gate (1/8", 0V 12V)
Accent On (1/8", 0V 5.5V)
Clock (1/8", DIN Sync compatible, 0V 5V)
Start/Stop (1/8", DIN Sync compatible, 0V 5V)
MIDI Out / Thru

Inputs

Filter In (+4dBu nominal, 100kO input impedance)
Power (9VDC, 300mA) | MIDI In

PC Functions

Cyclone Studio application for PC & Mac enables Bass Bot software update and user data backup & restore using MIDI/SysEx transfer.

Physical

Dimensions: L310mm x W130mm x H35mm
Weight: Unit 783g (Boxed with accessories) 1.332kg

Included Accessories: 100-240v Universal Power Adapter | Near Invisible Force Field | Case Transporter | Printed User Manual

Available Accessories: 7 Lines 1/8 to 1/4 output cable snake | Triple 100-240v Universal Power Adapter

Notes: Bass Bot is an intelligent sequencer featuring 21st century transistor technology. An analogue, monophonic synthesizer with classic step entry programming by the user or Bot computer-generated patterns. Seven unique preset personality programs, capable to generate up to 224 read only computer generated presets by the Bass Bot. An additional 224 Write Editable Patterns can compose up to 7 songs of up to 127 bars. All information is saved to on-board flash (permanent) memory and transferable directly to other Bass Bots via 8 DIN cable, (unit cloning) or to PC/MAC (backup) computers for storage with a downloadable transfer application available.

Supplied with Euro two pin to UK three pin adapter

Notes: The TT-78, from Cyclone Analogic, is the next step in their collection of classic reproductions of iconic drum machines. The TT-78 is modelled after the classic CR-78 drum machine from Roland, produced in 1978. The TT-78 contains all the modern upgrades one would expect, while also being housed in a sleek shell, similar to the TT-303 and TT-606. It has the same intuitive sequencing functions as the previous Cyclone Analogic unit, but with a completely different sound palette, using sounds like Bongos, Congas, Maracas, and Guiro. There are seven individual outputs, providing independent jacks for most of the sounds. It also comes complete with MIDI In, Out and Thru, for synchronizing the TT-78 with all one's other gear.

*Supplied with Euro two pin to UK three pin adapter*

Notes: Well, it's not very glamorous, but everybody needs a patchbay. And as for the PB-48, it is a patchbay that just works, all the time, every time. It comes in 2 flavors: half-normalled or de-normalled, with 48 1/4" points on the front panel, connected to 48 1/4" points on the rear.

The PB-48 is a rugged, noise-free, versatile patchbay designed to serve all your patchbay needs, from providing clear and easy access to your mixer and other studio gear, to reducing the wear and tear on their jacks, to facilitating quick and precise rerouting of devices within your studio setup. See, not glamorous, but it works great.

The specifications:

Chassis dimensions (H x W x D): 44mm x 482mm x 68mm
Module dimensions (H x W x D): 40mm x 18mm x 68mm
Shipping weight: 1.06kg
Jacks: 1/4" phone, balanced or unbalanced.

Notes: Custom engineered in the UK for the 1010 Music Blackbox Sampler & Bluebox Mixer & Recorder, Decksaver's super durable polycarbonate shell protects against dust, liquid and accidental impact. Precision trimmed for an exact fit whilst accommodating cables, your MPC can sit ready for operation. Slides straight into a flight case or bag ready for transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.

Notes: Engineered specifically for the Ableton Push 2 controller. Tough but lightweight polycarbonate shell protects from damaging elements such as smoke, dust, liquid and accidental impact.

Precision moulded for an exact fit whilst accommodating cables, your Push 2 can sit ready for operation. Slides straight into a flight case or controller bag ready for transportation. Shields delicate controls from damage in the studio, in transit and on stage.

Notes: Introducing the ultimate guardian for your prized Ableton Push 3 - the Decksaver cover! Unlock the full potential of your music production powerhouse while ensuring it remains in pristine condition for years to come. Crafted with meticulous precision and unrivalled expertise, our lid is designed to complement the brilliance of your Ableton Push 3.

The Ableton Push 3 is more than just a controller; it's a gateway to a world of limitless creativity. Its seamless integration with Ableton Live empowers you to bring your musical ideas to life with unparalleled ease. However, with great innovation comes the responsibility to protect your investment from the challenges of the studio and the stage.

This Decksaver cover is built to provide an impenetrable shield against dust, dirt, liquid spills, and accidental knocks. Made from premium-quality polycarbonate (to our own unique recipe), this cover ensures your Ableton Push 3 remains immaculate and free from wear and tear, so you can focus solely on the creative duties of making music.

Designed with precision, the custom-fit mould embraces your Push 3 like a second skin. Whether you're performing live, producing in the studio, or taking your music on the road, our cover ensures your creative flow remains uninterrupted.

As pioneers in protective solutions for musical gear, Decksaver takes immense pride in our stringent quality standards. The design for the Ableton Push 3 Decksaver cover has been rigorously tested to meet the highest level of fit, durability and reliability, ensuring it withstands the demands of your musical journey.

Join the league of top-tier music producers and DJs who trust Decksaver to safeguard their musical instruments. Elevate your music production experience with the confidence that your Ableton Push 3 is cocooned in some of the finest protection available.

Seize the opportunity to explore new sonic dimensions and compose your musical opus without worry. Choose Decksaver, choose excellence, and choose to take your music production to new heights with the Ableton Push 3 Decksaver cover.

Your journey to sonic greatness starts here!

Dimensions

Weight: 0.7 kg
Length: 38.8 cm
Width: 32.5 cm
Height: 4.5 cm

Material: Smoked clear polycarbonate.

Notes: Custom engineered for the Akai MPC Live and MPC Touch. This super durable polycarbonate shell protects your controller from damaging elements such as smoke, dust, liquids and impact. Precision trimmed for perfect fit whilst accommodating cables, the MPC Live/Touch can sit ready for operation. Slides straight into a flight case or controller bag, ideal for transportation. Shields delicate faders, controls and internal components from damage at home, on the road or in the club.

Notes: The APC40 MK2 has solidified its reputation as a cutting-edge MIDI controller, admired by musicians for its seamless integration with Ableton Live and advanced features. Its intuitive workflow, extensive control options, and enhanced performance capabilities make it an indispensable tool for DJs, producers, and live performers alike.

Understanding the importance he of safeguarding this valuable piece of equipment, we have developed a tailored solution: the Decksaver cover. Designed with meticulous precision, our custom-molded polycarbonate cover is crafted to perfectly fit the contours of the APC40 MK2, ensuring optimal protection.

Our Decksaver cover offers comprehensive safeguarding against a range of potential hazards, including dust, spills, and accidental impacts. Constructed from high-quality polycarbonate material, our cover provides exceptional durability, ensuring the longevity of your APC40 MK2.

With a Decksaver cover adorning your APC40 MK2, you can perform with confidence in any setting. Whether you're on stage, in the studio, or on the move, our cover delivers reliable protection, preserving the pristine condition of your MIDI controller. Trust in Decksaver to provide the ultimate shield for your valuable APC40 MK2, ensuring its longevity and uninterrupted performance for years to come. Let your creativity thrive, knowing that your APC40 MK2 is safeguarded by the unparalleled protection of Decksaver.

Key features:
Patented smoked/clear transparency, unique to Decksaver.
Protects against dust, liquid and impacts.
Shields vulnerable faders, switches and knobs during transportation.
Low profile design enables compatibility with most flight cases and travel bags.

Dimensions:
Weight 0.42 kg
Length 42.6 cm
Width 25.6 cm
Height 2.6 cm

Notes: The AKAI APC64 is a dynamic instrument in the realm of music production and live performance, playing a critical role in numerous artists' setups. To protect such a vital piece of equipment, this Decksaver cover, made from sturdy polycarbonate, presents the perfect solution. It is precisely crafted to shield your APC64 from dust, liquid spills, and unexpected knocks.

Expertly designed for the AKAI APC64, this Decksaver cover ensures an impeccable fit, accommodating all cables and connections. This meticulous attention to detail allows the cover to be smoothly slotted into a flight case or controller bag, ideal for those constantly on the move. Whether you're moving your setup to a performance, operating in a studio, or engaging in live shows, this cover offers superior protection, ensuring your APC64's buttons, pads, and knobs are defended against the challenges of daily use.

Choosing this Decksaver cover for your AKAI APC64 is more than a sensible decision; it signifies a dedication to preserving the longevity and impeccable condition of your cherished equipment.

Dimensions
Weight: 0.365 kg
Length: 37.7 cm
Width: 27.5 cm
Height: 2.7 cm

Material: Smoked clear polycarbonate.

WARNING: When your Decksaver cover is in place, please ensure that your equipment is kept away from direct and high heat sources, such as radiators, fires and sunlight.

Notes: Units like the Akai MPC Live 2 sequencer are music-production powerhouses - they are the fulcrum of your setup and cannot go unprotected.

Our super durable polycarbonate shell offers protection from dust, spillages and accidental impact.

Each Decksaver is trimmed precisely to fit, leaving cables in place. Slides straight into a flight case or controller bag, perfect for transportation.

Shields delicate controls and internal components from damage on the road, at home or in the club.

Key features:

Patented smoked/clear transparency, unique to Decksaver.
Protects against dust, liquid and impacts.
Shields vulnerable faders, pads and knobs during transportation.
Low profile design enables compatibility with most flight cases and travel bags.

Fits:

MPC Live II Beatclub Edition
MPC Live II Timbaland Edition

Dimensions:

Weight 0.850kgs
Length 41.60cm
Width 24.80cm
Height 3.00cm

Notes: Units like the Akai MPC One sequencer are music-production powerhouses, they are the fulcrum of your setup and simply cannot go unprotected. This super durable polycarbonate shell offers protection from dust, spillages and accidental impact. Each Decksaver is trimmed precisely to fit, leaving cables in place. The Akai MPC One Standalone Music Production Controller Cover slides straight into a flight case or controller bag, perfect for transportation, and it also shields delicate controls and internal components from damage on the road, at home or in the club.

DIMENSIONS:

Weight: 0.76kg
Length: 28.2cm
Width: 28cm
Height: 3.9cm

Notes: Light Edition - still made from super durable polycarbonate but reaching you at a more affordable price. Engineered in the UK specifically for the Akai Pro MPK Mini MK3 Keyboard Controller. Custom moulded to fit the contours of the unit whilst leaving USB connections in place, the MPK Mini MK2 can sit ready for operation. Super durable polycarbonate shell protects delicate keys during transportation and slides straight into a flight case or bag for maximum protection. Don't go losing your keys.