100% Sicheres Einkaufen
Studio equipment
Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.
100% Sicheres Einkaufen
DJ equipment
Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices. Visit Juno DJ
Hilfe
BestellenProbleme beim BestellenHäufig gestellte FragenKontaktiere unsKontaktiere uns (Lieferanten)Über JunoJuno DailyNeuerscheinungen dieser WocheDJ & Studio StoreTagsFeedbackDatenschutzregelungReturns & refundsAGBFinanceJuno Vinyl DistributionJuno Vinyl WholesaleJuno Marketing and PR departmentPromote your label / releases
Filter
Equipment
Format
Release Date
2,964
Not Forthcoming
27
Last Week
41
Last 2 Weeks
68
Last Month
187
Last 2 Months
482
Last 6 Months
844
Last Year
Price
Tags
Back catalogue: Studio Equipment
Juno's full catalogue of Studio Equipment
Options
Sort
Artist
Artist
- Bestseller:
- Absteigend sortieren
- Artist:
- Alphabetisch sortieren (aufsteigend)
- Alphabetisch sortieren (absteigend)
- Title:
- Alphabetisch sortieren (aufsteigend)
- Alphabetisch sortieren (absteigend)
- Label:
- Alphabetisch sortieren (aufsteigend)
- Alphabetisch sortieren (absteigend)
- Date:
- Nach Alter sortieren (absteigend)
- Nach Alter sortieren (aufsteigend)
- Price:
- Nach Preis sortieren (aufsteigend)
- Nach Preis sortieren (absteigend)
- Label rank:
- Low to high
- High to low
People also bought...
ADDAC System ADDAC712 Vintage Pre 2-Channel Discrete Gain Staging Amplifier Module (distortion/dual/stereo/mixer/preamp synth module)
Cat: 917638 Rel: 27 Jan 23
ADDAC712 is a dual channel discrete gain staging ampli- fier, based on a famous discrete preamp board from the 70’s used in some legendary equipment.
Notes: ADDAC712 is a dual channel discrete gain staging amplifier, based on a famous discrete preamp board from the 70's used in some legendary equipment.
What was eye-catching was the character of its clipping and resulting saturation/distortion.
The module can be used with modular signals to add a distortion/fuzz character or as a preamp for an external source such as a line source, keyboard, guitar...
It's also a great side companion for our ADDAC711 Balanced Inputs.
At the top an On/Off [BYPASS] switch routes the signal into the Effect (Up: Active) or to the bottom output gain stage (Down: Bypassed).
The amount of amplification is set by the [GAIN] control, the maximum amount of amplification can be set by the user using the [MAX GAIN] trimmer.
Up to +/-5.5v the incoming signal will keep it's integrity, beyond this point saturation will start to increase.
At approx. +/-6v a hard clipping will start to occur, this clipping also has a particular quality that at extreme levels it drifts the audio 0v bias reference, moving it upwards which results are similar to a Gate effect.
In the middle, an x2 opamp based output gain stage with a clipping led, which monitors the clipping at the output, and an [OUTPUT] control to set the output volume.
Having the top and middle gain stages provides flexibility allowing the user to completely distort the signal on the top stage and tame it's output level with the second stage.
At the bottom, Input and Output for both channels (Left input is normalled into Right input).
Tech Specs:
6HP
4 cm deep
40mA +12V
40mA -12V
… Read moreWhat was eye-catching was the character of its clipping and resulting saturation/distortion.
The module can be used with modular signals to add a distortion/fuzz character or as a preamp for an external source such as a line source, keyboard, guitar...
It's also a great side companion for our ADDAC711 Balanced Inputs.
At the top an On/Off [BYPASS] switch routes the signal into the Effect (Up: Active) or to the bottom output gain stage (Down: Bypassed).
The amount of amplification is set by the [GAIN] control, the maximum amount of amplification can be set by the user using the [MAX GAIN] trimmer.
Up to +/-5.5v the incoming signal will keep it's integrity, beyond this point saturation will start to increase.
At approx. +/-6v a hard clipping will start to occur, this clipping also has a particular quality that at extreme levels it drifts the audio 0v bias reference, moving it upwards which results are similar to a Gate effect.
In the middle, an x2 opamp based output gain stage with a clipping led, which monitors the clipping at the output, and an [OUTPUT] control to set the output volume.
Having the top and middle gain stages provides flexibility allowing the user to completely distort the signal on the top stage and tame it's output level with the second stage.
At the bottom, Input and Output for both channels (Left input is normalled into Right input).
Tech Specs:
6HP
4 cm deep
40mA +12V
40mA -12V
1 in stock $167.10
Click for better price!
or call +44 20 7424 1960
quote 917638
quote 917638
People also bought...
ADDAC System ADDAC713 Stereo Discreet Mixer Module (B-STOCK) (distortion/dual/stereo/mixer/panning synth module)
Cat: 944637 Rel: 01 Jan 90
B-STOCK: Box opened, but product is in excellent condition and in perfect working order
Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***
Inspired by the legendary Moog CP3 mixer, the 713 tweaks the old-school discrete circuits into three stereo inputs and one mono channel, summing to stereo with adjustable feedback and clipping to add character.
Supplier's Notes:
ADDAC713 is the stereo version of ADDAC System's 703 Discrete Mixer.
Inspired by Moog's CP3 mixer, this is a fully discrete analogue mixer and it's not, by any means, your standard breakfast mixer, although it can behave like one.
This is a wolf in sheep's clothing. Despite its harmless looks there's a dark snarly soul behind that panel that wants to take your sounds into a realm of gritty gnarly growls.
This new version was initially thought of as a percussion mixer, with mono inputs and panning, to allow placing percussive voices in the stereo field, while keeping channel 4 in mono for low end sources like a kick drum or Bass. In the development process ADDAC System slightly changed this initial idea, adding stereo inputs for the first 3 channels, but still kept the 4th channel in mono.
All four [GAIN] controls go to extreme levels, the first 3channels also feature [PAN] controls. Feedback is used to overdrive the whole mix. As the control is turned clockwise the sound will be clipped harder until it goes completely off, this happens as feedback is increased the audio bias reference also moves up, at extreme levels it offsets the whole signal upwards until it completely goes above the top rail clipping the whole signal hence the resulting gate effect.
The [MASTER OUTPUT] sets the overall output gain of the mixer, the two leds monitor the audio output signal. The Soft clipping switch engages an anti-click circuit which adds a low pass before the output, the switch allows 3 states: Soft low pass / Off / Hard low pass.
Features:
Three channels with stereo inputs, gain and pan knob
One channel with mono input and gainknob
Feedback/gate knob
Master output volume knob
Soft clipping switch
Two Led Monitors for Left and Right channels
Tech Specs:
8HP
4cm deep
80mA +12V
80mA -12V
… Read moreInspired by the legendary Moog CP3 mixer, the 713 tweaks the old-school discrete circuits into three stereo inputs and one mono channel, summing to stereo with adjustable feedback and clipping to add character.
Supplier's Notes:
ADDAC713 is the stereo version of ADDAC System's 703 Discrete Mixer.
Inspired by Moog's CP3 mixer, this is a fully discrete analogue mixer and it's not, by any means, your standard breakfast mixer, although it can behave like one.
This is a wolf in sheep's clothing. Despite its harmless looks there's a dark snarly soul behind that panel that wants to take your sounds into a realm of gritty gnarly growls.
This new version was initially thought of as a percussion mixer, with mono inputs and panning, to allow placing percussive voices in the stereo field, while keeping channel 4 in mono for low end sources like a kick drum or Bass. In the development process ADDAC System slightly changed this initial idea, adding stereo inputs for the first 3 channels, but still kept the 4th channel in mono.
All four [GAIN] controls go to extreme levels, the first 3channels also feature [PAN] controls. Feedback is used to overdrive the whole mix. As the control is turned clockwise the sound will be clipped harder until it goes completely off, this happens as feedback is increased the audio bias reference also moves up, at extreme levels it offsets the whole signal upwards until it completely goes above the top rail clipping the whole signal hence the resulting gate effect.
The [MASTER OUTPUT] sets the overall output gain of the mixer, the two leds monitor the audio output signal. The Soft clipping switch engages an anti-click circuit which adds a low pass before the output, the switch allows 3 states: Soft low pass / Off / Hard low pass.
Features:
Three channels with stereo inputs, gain and pan knob
One channel with mono input and gainknob
Feedback/gate knob
Master output volume knob
Soft clipping switch
Two Led Monitors for Left and Right channels
Tech Specs:
8HP
4cm deep
80mA +12V
80mA -12V
2 in stock $190.85
People also bought...
ADDAC System ADDAC714 Vintage Clip 2-Channel Soft Clipping Module (distortion/dual/stereo/dynamics/effect/filter synth module)
Cat: 917651 Rel: 27 Jan 23
Dual channel soft clipping module in 6HP.
Notes: ADDAC714 is a dual channel soft clipping module.
Diode based passive clipping acts as a "brick wall" limiter with a fixed knee given by the inherent diode physics. A passive RC low pass circuit adds a 3.3KHz -3db low pass filter which sculpts the overall tone while also adding further character to the effect.
At the top an On/Off [BYPASS] switch routes the signal into the Effect (Up: Active) or to the bottom output gain stage (Down: Bypassed).
The amount of clipping is set by the [GAIN] control, it mostly works as a threshold control for how much clipping will be applied.
As more clipping is applied the signal's amplitude will also decrease, to compensate for this we set up a gain compensation stage to keep the output amplitude balanced across the Gain range.
Symmetry chooses between bipolar clipping or positive clipping, this relates to the harmonics generated, bipolar for odd and even harmonics (up position) and unipolar for odd harmonics only (down position).
At the second stage, an opamp based x2 output gain with a clipping led, which monitors the clipping at the output, and an [Output] control to set the output volume.
Having the top and middle gain stages provides flexibility allowing the user to completely distort the signal on the top stage and tame it's output level with the second stage.
At the bottom, Input jacks for both channels (Left input is normalled into Right input) and output jacks
Tech Specs:
6HP
4 cm deep
40mA +12V
40mA -12V40mA +12V
40mA -12V
… Read moreDiode based passive clipping acts as a "brick wall" limiter with a fixed knee given by the inherent diode physics. A passive RC low pass circuit adds a 3.3KHz -3db low pass filter which sculpts the overall tone while also adding further character to the effect.
At the top an On/Off [BYPASS] switch routes the signal into the Effect (Up: Active) or to the bottom output gain stage (Down: Bypassed).
The amount of clipping is set by the [GAIN] control, it mostly works as a threshold control for how much clipping will be applied.
As more clipping is applied the signal's amplitude will also decrease, to compensate for this we set up a gain compensation stage to keep the output amplitude balanced across the Gain range.
Symmetry chooses between bipolar clipping or positive clipping, this relates to the harmonics generated, bipolar for odd and even harmonics (up position) and unipolar for odd harmonics only (down position).
At the second stage, an opamp based x2 output gain with a clipping led, which monitors the clipping at the output, and an [Output] control to set the output volume.
Having the top and middle gain stages provides flexibility allowing the user to completely distort the signal on the top stage and tame it's output level with the second stage.
At the bottom, Input jacks for both channels (Left input is normalled into Right input) and output jacks
Tech Specs:
6HP
4 cm deep
40mA +12V
40mA -12V40mA +12V
40mA -12V
2 in stock $155.16
Click for better price!
or call +44 20 7424 1960
quote 917651
quote 917651
People also bought...
ADDAC System ADDAC807A&B VC Stereo Summing Mixer Console & Inputs Console Module (attenuator/dynamics/mixer/panning/VCA/expander synth module)
Cat: 776434 Rel: 08 Sep 20
VC stereo summing mixer module, main console and inputs console in 80HP.
Notes: All you could ever dream of from an Eurorack console, and then some!
The ADDAC807A VC Stereo Summing Mixer offers you the power, the flexibility and the gorgeous layout of a high-end audio console, in the popular Eurorack format. Starting off at 5 stereo channels, with the option to add 4 additional stereo channels via the ADDAC807C Expansion Console, its send/return options and clever matrix will ensure you have that perfect mix down in seconds. Customary to ADDAC System designs, there is enough CV control and hands-on switch options to make the ADDAC807A into an instrument in and of itself.
The ADDAC807A is accompanied by its sibling, the ADDAC807B Inputs Console. We decided to allow the user to freely define the placement of the jacks by separating the area where all your cables are located. Less clutter means more hands-on control and higher playability. The ADDAC807B Inputs Console holds all the jack inputs for the ADDAC807A Main Console, along with CV inputs and additional channel settings - 'cause you can never have enough switches!?
Module is sold together with the ADDAC807A, which also provides power. ADDAC807A price is for both the 807A and 807B.
… Read moreThe ADDAC807A VC Stereo Summing Mixer offers you the power, the flexibility and the gorgeous layout of a high-end audio console, in the popular Eurorack format. Starting off at 5 stereo channels, with the option to add 4 additional stereo channels via the ADDAC807C Expansion Console, its send/return options and clever matrix will ensure you have that perfect mix down in seconds. Customary to ADDAC System designs, there is enough CV control and hands-on switch options to make the ADDAC807A into an instrument in and of itself.
The ADDAC807A is accompanied by its sibling, the ADDAC807B Inputs Console. We decided to allow the user to freely define the placement of the jacks by separating the area where all your cables are located. Less clutter means more hands-on control and higher playability. The ADDAC807B Inputs Console holds all the jack inputs for the ADDAC807A Main Console, along with CV inputs and additional channel settings - 'cause you can never have enough switches!?
Module is sold together with the ADDAC807A, which also provides power. ADDAC807A price is for both the 807A and 807B.
1 in stock $1,566.22
Click for better price!
or call +44 20 7424 1960
quote 776434
quote 776434
People also bought...
Cat: 776670 Rel: 08 Sep 20
Summing mixer module
Notes: Dedicated expansion for the ADDAC807C VC Summing Mixer
Features 4 individual track post fader stereo outputs.
2Hp
2 cm deep
0mA
… Read moreFeatures 4 individual track post fader stereo outputs.
2Hp
2 cm deep
0mA
1 in stock $57.70
Click for better price!
or call +44 20 7424 1960
quote 776670
quote 776670
People also bought...
ADDAC System ADDAC809 Chain Router Module (black) (switch/utility synth module)
Cat: 883866 Rel: 13 Oct 22
ADDAC809 is a dynamic CV operated I/O router that allows one source (Audio or CV) to be routed through 2 different chains (of one or more modules) before being sent to an output.
Notes: ADDAC809 is a dynamic CV operated I/O router that allows one source (Audio or CV) to be routed through 2 different chains (of one or more modules) before being sent to an output.
Six routing patterns are allowed:
1. IN > OUT
2. IN > CHAIN A > OUT
3. IN > CHAIN B > OUT
4. IN > CHAIN A > CHAIN B > OUT
5. IN > CHAIN B > CHAIN A > OUT
6. IN > > OUT
A practical example is to have an audio source, a delay and a looper.
And the question: should the delay be placed before or after the looper? Sometimes you may need the delay to be before the looper as you may want to sample the audio with the delay or sample the pure audio source and apply the delay afterwards.
This small utility module solves this issue on the fly without having to repatch anything.
INPUTS & OUTPUTS
TO CHAIN B: Connect to your Chain B input
FROM CHAIN B: Connect to your Chain B output
TO CHAIN A: Connect to your Chain A input
FROM CHAIN A: Connect to your Chain A output
INPUT: Connect to your Input Source
OUTPUT: Connect to your Output Source
ROUTING PATTERNS
There are 2 ways to address the six routing patterns:
Buttons: using the frontpanel push buttons and/or dedicated trigger inputs to latch between 2 states.
BYPASS: Chooses between Pattern 1 and any other pattern
PARALLEL: Chooses between Pattern 6 and any other pattern
ORDER: Chooses the order A before B or B before A
DUAL/SINGLE: Chooses to use a Dual (A>B or B>A) or Single chain (A or B)
CV: The dedicated CV input expects a 0 to +5v input and allows to jump to the precise routing pattern using a specific voltage interval in increments of approx. 0.83V:
Pattern 1: 0v to 0.83v
Pattern 2: 0.83v to 1.66v
Pattern 3: 1.66v to 2.5v
Pattern 4: 2.5v to 3.33V
Pattern 5: 3.33v to 4.16V
Pattern 6: 4.16v to 5V
Tech Specs:
Width: 12 HP
Depth: 55mm
Current: 80mA +12V / 30mA -12V
… Read moreSix routing patterns are allowed:
1. IN > OUT
2. IN > CHAIN A > OUT
3. IN > CHAIN B > OUT
4. IN > CHAIN A > CHAIN B > OUT
5. IN > CHAIN B > CHAIN A > OUT
6. IN > > OUT
A practical example is to have an audio source, a delay and a looper.
And the question: should the delay be placed before or after the looper? Sometimes you may need the delay to be before the looper as you may want to sample the audio with the delay or sample the pure audio source and apply the delay afterwards.
This small utility module solves this issue on the fly without having to repatch anything.
INPUTS & OUTPUTS
TO CHAIN B: Connect to your Chain B input
FROM CHAIN B: Connect to your Chain B output
TO CHAIN A: Connect to your Chain A input
FROM CHAIN A: Connect to your Chain A output
INPUT: Connect to your Input Source
OUTPUT: Connect to your Output Source
ROUTING PATTERNS
There are 2 ways to address the six routing patterns:
Buttons: using the frontpanel push buttons and/or dedicated trigger inputs to latch between 2 states.
BYPASS: Chooses between Pattern 1 and any other pattern
PARALLEL: Chooses between Pattern 6 and any other pattern
ORDER: Chooses the order A before B or B before A
DUAL/SINGLE: Chooses to use a Dual (A>B or B>A) or Single chain (A or B)
CV: The dedicated CV input expects a 0 to +5v input and allows to jump to the precise routing pattern using a specific voltage interval in increments of approx. 0.83V:
Pattern 1: 0v to 0.83v
Pattern 2: 0.83v to 1.66v
Pattern 3: 1.66v to 2.5v
Pattern 4: 2.5v to 3.33V
Pattern 5: 3.33v to 4.16V
Pattern 6: 4.16v to 5V
Tech Specs:
Width: 12 HP
Depth: 55mm
Current: 80mA +12V / 30mA -12V
3 in stock $125.37
People also bought...
AE Modular 2CVADD-HQ Dual Precision CV Adder Module (synth module)
Cat: 944289 Rel: 15 Feb 24
A dual precision adder module.
Notes: The 2CVADD-HQ is a dual precision adder especially for adding 1V/octave (pitch-controlling) CVs. This makes it possible e.g. to transpose a sequence. Compared to general purpose CV mixers (like POLAMIX), this module does the summing of the CVs very precise (within a few millivolts), so the desired pitch is not affected.
The module offers three CV inputs for each of the both units; the first unit has an additional fourth input where the CV is subtracted - meaning "transposition downwards".
If you would like to have transposition buttons to shift by one or two octaves (or a free offset), take a look at the CVADDER-HQ module.
… Read moreThe module offers three CV inputs for each of the both units; the first unit has an additional fourth input where the CV is subtracted - meaning "transposition downwards".
If you would like to have transposition buttons to shift by one or two octaves (or a free offset), take a look at the CVADDER-HQ module.
1 in stock $48.52
Click for better price!
or call +44 20 7424 1960
quote 944289
quote 944289
People also bought...
AE Modular 2TONE EQ Module (eurorack effects module)
Cat: 836533 Rel: 24 Dec 21
Dual bass-treble tone control
Notes: 2TONE is a dual bass-treble tone control, that is a quite useful companion for the MIXCONSOLE, to shape the overall spectrum of individual signal paths.
… Read more 1 in stock $38.40
People also bought...
AE Modular 4ATTMIX Mixer & Quadattenuator Module (synth module)
Cat: 719689 Rel: 02 Sep 19
Versatile mixer/quadattenuator
Notes: 4ATTMIX offers four input channels which can be level controlled / attenuated by the corresponding knobs. The attenuated signals are sent to four outputs.
Additionally, each channel can be sent to an internal mixer by the switches beside the knobs. The mix signal is then sent to the mix output.
An additional switch selects the general operation mode for the mixer, for DC/CV signals or for audio signals.
… Read moreAdditionally, each channel can be sent to an internal mixer by the switches beside the knobs. The mix signal is then sent to the mix output.
An additional switch selects the general operation mode for the mixer, for DC/CV signals or for audio signals.
1 in stock $42.30
Click for better price!
or call +44 20 7424 1960
quote 719689
quote 719689
People also bought...
AE Modular CVADDER-HQ Precision CV Adder Module (synth module)
Cat: 944306 Rel: 15 Feb 24
A precision adder module especially for adding 1V/octave (pitch-controlling) CVs.
Notes: The CVADDER-HQ is a precision adder especially for adding 1V/octave (pitch-controlling) CVs. This makes it possible e.g. to transpose a sequence. Compared to general purpose CV mixers (like POLAMIX), this module does the summing of the CVs very precise (within a few millivolts), so the desired pitch is not affected.
The module offers four CV inputs where three of them are summed, and the CV at the fourth input is subtracted - meaning "transposition downwards".
This module also allows transposing the incoming CV by one or two octaves or a variable offset by buttons.
A separate output provides the voltage of the internal transposition (+1, +2 octaves / free).
If the transposition buttons are not necessary and you prefer to have a dual precision adder, take a look at the 2CVADD-HQ module.
… Read moreThe module offers four CV inputs where three of them are summed, and the CV at the fourth input is subtracted - meaning "transposition downwards".
This module also allows transposing the incoming CV by one or two octaves or a variable offset by buttons.
A separate output provides the voltage of the internal transposition (+1, +2 octaves / free).
If the transposition buttons are not necessary and you prefer to have a dual precision adder, take a look at the 2CVADD-HQ module.
1 in stock $51.64
Click for better price!
or call +44 20 7424 1960
quote 944306
quote 944306
People also bought...
AE Modular JOYSTICK Eurorack Module (synth module)
Cat: 818237 Rel: 06 Jul 21
Eurorack interface module
Notes: This module offers a four-quadrant-control for CVs via its joystick.
The module can act either as CV source at its four outputs, or as four-quadrant attenuator for the CV inputs. Beyond this, a mix of the input CVs according to the joystick position is provided separately.
Another feature is a gate output that is controlled by pressing the joystick handle.
The joystick remains in each position - there is no automatic "return to centre".
The JOYSTICK module can operate in two different modes:
Quadrants independent: In this mode, all outputs are zero when the joystick is in centre position
Overlapped: In this mode, each quadrant output fades from full to zero over the whole range to the opposite corner.
Together with a quad VCA / mixer (available soon from tangible waves) you can use the JOYSTICK also for mixing/blending four independent audio sources.
… Read moreThe module can act either as CV source at its four outputs, or as four-quadrant attenuator for the CV inputs. Beyond this, a mix of the input CVs according to the joystick position is provided separately.
Another feature is a gate output that is controlled by pressing the joystick handle.
The joystick remains in each position - there is no automatic "return to centre".
The JOYSTICK module can operate in two different modes:
Quadrants independent: In this mode, all outputs are zero when the joystick is in centre position
Overlapped: In this mode, each quadrant output fades from full to zero over the whole range to the opposite corner.
Together with a quad VCA / mixer (available soon from tangible waves) you can use the JOYSTICK also for mixing/blending four independent audio sources.
1 in stock $68.09
Click for better price!
or call +44 20 7424 1960
quote 818237
quote 818237
People also bought...
AE Modular LOPAG Vactrol Lowpass Gate Module (synth module)
Cat: 719685 Rel: 02 Sep 19
Lowpass gate module for AE modular
Notes: The LOPAG is the lowpass gate module for AE. It is based on a Vactrol (like all good lowpass gates) and has two inputs: IN (audio signal) and TRIG. A pulse on the TRIG input opens the signal path shortly and via the characteristics of the Vactrol the audio signal is filtered and attenuated in a plucked, percussive way. Additional GATE and CV inputs allow more control over the way the module works.
… Read more 1 in stock $44.63
Click for better price!
or call +44 20 7424 1960
quote 719685
quote 719685
People also bought...
Cat: 807715 Rel: 25 May 21
Interface eurorack module
Notes: Channel extender for MIXCONSOLE.
This module extends the MIXCONSOLE module with three additional channels; the channel level can be controlled via CV here, too. If no CV is attached, the level knob works as usual volume control.
… Read moreThis module extends the MIXCONSOLE module with three additional channels; the channel level can be controlled via CV here, too. If no CV is attached, the level knob works as usual volume control.
1 in stock $64.87
Click for better price!
or call +44 20 7424 1960
quote 807715
quote 807715
People also bought...
AE Modular MIXCONSOLE JACKOUT Module (synth module)
Cat: 818239 Rel: 06 Jul 21
Eurorack interface module
Notes: The MIXCONSOLE JACKOUT is an extension for the MIXCONSOLE with 1/4" (6.5mm) jack sockets for master left/right output and for the FX send and returns - all via mono sockets (unbalanced). This avoids the need for separate adapter cables.
The module is connected via a small internal connection cable to the right of the MIXCONSOLE or as neighbour of the MIXCONSOLE XLROUT module.
… Read moreThe module is connected via a small internal connection cable to the right of the MIXCONSOLE or as neighbour of the MIXCONSOLE XLROUT module.
2 in stock $29.06
People also bought...
AE Modular NYLE FILTER Steiner Type Filter Module (synth module)
Cat: 719683 Rel: 19 Oct 20
Steiner filter for AE modular
Notes: The NYLE FILTER is an adaption of the Steiner Filter for the AE modular palette. It contains the classic filter curves lowpass/highpass/bandpass with adjustable filter frequency and resonance. The unique feature of this filter type is, that there are separate inputs for lowpass/highpass/bandpass (not separate outputs as with other filters). This allows quite unusual sounds, if different signals are fed into the different inputs.
Each input has its own attenuator; for frequency CV control there are two inputs with individual attenuators. Additionally, the resonance can also be CV controlled!
The sound goes from quite soft filtering with low resonance setting to a quite intense resonance peak to full self-resonance.
… Read moreEach input has its own attenuator; for frequency CV control there are two inputs with individual attenuators. Additionally, the resonance can also be CV controlled!
The sound goes from quite soft filtering with low resonance setting to a quite intense resonance peak to full self-resonance.
1 in stock $48.15
Click for better price!
or call +44 20 7424 1960
quote 719683
quote 719683
People also bought...
After Later Audio Alan Random Looping Sequencer Module (CV modulation/random/sequencer synth module)
Cat: 805272 Rel: 14 Jan 21
Register-based sequencer module
Notes: Alan (micro Turing Machine) Shift Register Based Sequencer
The randomness of the Music Thing Modular Turing Machine, shrunk down to 6HP. Alan retains all of the same functionality as the original including the connectors for the expanders.
While this module has little to do with the original Turing Machine (by Alan Turing), it is a shift register based sequencer. You cannot program this sequencer, instead it builds random sequences that can be locked in.
Alan comes tested, calibrated and ready to bring random voltages.
The After Later Audio panel is black and gold and made from FR4. The package will include a power/ribbon cable and a one year warranty.
… Read moreThe randomness of the Music Thing Modular Turing Machine, shrunk down to 6HP. Alan retains all of the same functionality as the original including the connectors for the expanders.
While this module has little to do with the original Turing Machine (by Alan Turing), it is a shift register based sequencer. You cannot program this sequencer, instead it builds random sequences that can be locked in.
Alan comes tested, calibrated and ready to bring random voltages.
The After Later Audio panel is black and gold and made from FR4. The package will include a power/ribbon cable and a one year warranty.
1 in stock $179.55
Click for better price!
or call +44 20 7424 1960
quote 805272
quote 805272
People also bought...
After Later Audio Atom Modal Synthesiser Module (digital/synth voice module)
Cat: 805274 Rel: 14 Jan 21
Modal synthesiser module - 18HP
Notes: The full power of Mutable Instruments Elements packed into 18hp. It features jack lights that can be turned on/off via a jumper on the back. This module comes loaded with the most recent firmware, with the new Chords mode that unlocks a whole new world of potential.
Based on open source designs by emilie gillet under Creative Commons (CC-BY-SA) license.
Width: 18hp
12V: 130mA
-12V: 10mA
… Read moreBased on open source designs by emilie gillet under Creative Commons (CC-BY-SA) license.
Width: 18hp
12V: 130mA
-12V: 10mA
3 in stock $223.14
Click for better price!
or call +44 20 7424 1960
quote 805274
quote 805274
People also bought...
After Later Audio Baker Peaks Redesigned Module (enveolpe generator/LFO/drum synth module)
Cat: 805024 Rel: 14 Jan 21
Peaks with CV inputs and attenuverters in 6HP.
Notes: A 6HP version of Mutable Instruments Peaks that adds CV inputs and attenuverters for each of the four parameters.
It can be an ADSR-style envelope generator, an LFO and a drum emulator. By default, the Dead Man's Catch (DMC) firmware will be loaded, which adds the Alt ENV, ALT LFO, ALT Tap, Alt Drum modes below.
The module is calibrated, comes with a power cable, and a one year warranty.
Additional Dead Man's Catch firmware modes:
Basic (original modes):
Envelope
LFO
Tap LFO
Bass/Snare Drums
Alternative ENV:
Double attack envelope
Repeating attack envelope
Looping envelope
Randomized AD envelope
Bouncing ball envelope
Alternative LFO:
Frequency-modulated LFO (folded sine FM)
Frequency-modulated LFO (random FM)
Varying wave shape LFO ( folded sine WS mod)
Varying wave shape LFO ( random WS mod)
Phase-locked loop oscillator
Alternative TAP Mini-sequencer:
ModSequencer
Pulse Shaper
Pulse Randomizer
Turing Machine
Bytebeats
Alternative DRUM:
FM drum Generators
Randomized bass and snare drum generators
Randomized high hat
… Read moreIt can be an ADSR-style envelope generator, an LFO and a drum emulator. By default, the Dead Man's Catch (DMC) firmware will be loaded, which adds the Alt ENV, ALT LFO, ALT Tap, Alt Drum modes below.
The module is calibrated, comes with a power cable, and a one year warranty.
Additional Dead Man's Catch firmware modes:
Basic (original modes):
Envelope
LFO
Tap LFO
Bass/Snare Drums
Alternative ENV:
Double attack envelope
Repeating attack envelope
Looping envelope
Randomized AD envelope
Bouncing ball envelope
Alternative LFO:
Frequency-modulated LFO (folded sine FM)
Frequency-modulated LFO (random FM)
Varying wave shape LFO ( folded sine WS mod)
Varying wave shape LFO ( random WS mod)
Phase-locked loop oscillator
Alternative TAP Mini-sequencer:
ModSequencer
Pulse Shaper
Pulse Randomizer
Turing Machine
Bytebeats
Alternative DRUM:
FM drum Generators
Randomized bass and snare drum generators
Randomized high hat
2 in stock $174.36
Click for better price!
or call +44 20 7424 1960
quote 805024
quote 805024
People also bought...
After Later Audio Barback Mixer Expander Module For Bartender (mixer/dual/stereo/panning/VCA/expander module)
Cat: 1004405 Rel: 11 Mar 24
Mixer expander module for Bartender
Notes: Two channel expander for Bartender
Mixer section
Each channel has the following:
Stereo or mono - Each channel can be treated as a stereo channel or a mono channel with two summed inputs.
CV inputs for both panning and level control
Two send buses - You can route each channel to one of two send buses. Each send bus is stereo. You can choose if you want the send to come before or after the level/panning controls.
Mute - The mute has both latching mute (up) and a momentary mute (down). The mute uses a capacitor to slow the turn off and on of the mute action. So it is mostly click-less, but you may find an occasional pop.
Cue bus - You can route each channel to the cue bus.
Expandable Mixer Series
Bartenders can be cascaded to create 8ch, 12ch, or 16ch mixer. The main level is what is sent the main level control can act as a group control.
Barbacks can be added to add 2ch to your mix. Barbacks can also be cascaded enabling up to a 16ch mixer configuration.
Send-VCA can be added for CV control of the level of the send.
DVCA, Cast Iron, Mingles, and USB-2CH can all be connected with Dupont cables (aka female to female breadboard cables) via pin headers on the back of the modules. Connecting the in and out pins will send/receive the audio into the next module.
Width: 10hp
12V: 125mA
-12V: 100mA
… Read moreMixer section
Each channel has the following:
Stereo or mono - Each channel can be treated as a stereo channel or a mono channel with two summed inputs.
CV inputs for both panning and level control
Two send buses - You can route each channel to one of two send buses. Each send bus is stereo. You can choose if you want the send to come before or after the level/panning controls.
Mute - The mute has both latching mute (up) and a momentary mute (down). The mute uses a capacitor to slow the turn off and on of the mute action. So it is mostly click-less, but you may find an occasional pop.
Cue bus - You can route each channel to the cue bus.
Expandable Mixer Series
Bartenders can be cascaded to create 8ch, 12ch, or 16ch mixer. The main level is what is sent the main level control can act as a group control.
Barbacks can be added to add 2ch to your mix. Barbacks can also be cascaded enabling up to a 16ch mixer configuration.
Send-VCA can be added for CV control of the level of the send.
DVCA, Cast Iron, Mingles, and USB-2CH can all be connected with Dupont cables (aka female to female breadboard cables) via pin headers on the back of the modules. Connecting the in and out pins will send/receive the audio into the next module.
Width: 10hp
12V: 125mA
-12V: 100mA
3 in stock $155.68
Click for better price!
or call +44 20 7424 1960
quote 1004405
quote 1004405
People also bought...
After Later Audio Bartender Stereo Performance Mixer Module (mixer/dual/stereo/panning/VCA module)
Cat: 1004400 Rel: 11 Mar 24
4-channel stereo production mixer module - 24HP
Notes: Neatly implemented performance mixer with four stereo channels. CV control of level and pan, two pre- or post-fader stereo send busses, quiet mutes and cueing via a front-panel headphone socket.
Supplier's Notes:
Four channel stereo production mixer
Mixer section
Each channel has the following:
Stereo or mono - Each channel can be treated as a stereo channel or a mono channel with two summed inputs.
CV inputs for both panning and level control
Two send buses - You can route each channel to one of two send buses. Each send bus is stereo. You can choose if you want the send to come before or after the level/panning controls.
Mute - The mute has both latching mute (up) and a momentary mute (down). The mute uses a capacitor to slow the turn off and on of the mute action. So it is mostly click-less, but you may find an occasional pop.
Cue bus - You can route each channel to the cue bus.
Mains Section
Two stereo sends outputs
Two stereo returns - which can also be used to directly insert into the main mix.
Main stereo outputs - level controlled with the slider and stereo VU meter.
Main mono output - summed output of the main L&R. If you are after an 8ch mono mix, you can use each channel in stereo mode, use the level control to control the level and then pan control to control the levels of the two channels.
Cue Section
1/4" Headphone jack along with level control
Fader control to listen to the main mix, cue mix, or an adjustable mix of the two.
Expandable
Bartenders can be cascaded to create 8ch, 12ch, or 16ch mixer. The main level is what is sent the main level control can act as a group control.
Barbacks can be added to add 2ch to your mix. Barbacks can also be cascaded enabling up to a 16ch mixer configuration.
Send-VCA can be added for CV control of the level of the send.
DVCA, Cast Iron, Mingles, and USB-2CH can all be connected with Dupont cables (aka female to female breadboard cables) via pin headers on the back of the modules. Connecting the in and out pins will send/receive the audio into the next module.
Width: 24hp
12V: 260mA
-12V: 225mA
… Read moreSupplier's Notes:
Four channel stereo production mixer
Mixer section
Each channel has the following:
Stereo or mono - Each channel can be treated as a stereo channel or a mono channel with two summed inputs.
CV inputs for both panning and level control
Two send buses - You can route each channel to one of two send buses. Each send bus is stereo. You can choose if you want the send to come before or after the level/panning controls.
Mute - The mute has both latching mute (up) and a momentary mute (down). The mute uses a capacitor to slow the turn off and on of the mute action. So it is mostly click-less, but you may find an occasional pop.
Cue bus - You can route each channel to the cue bus.
Mains Section
Two stereo sends outputs
Two stereo returns - which can also be used to directly insert into the main mix.
Main stereo outputs - level controlled with the slider and stereo VU meter.
Main mono output - summed output of the main L&R. If you are after an 8ch mono mix, you can use each channel in stereo mode, use the level control to control the level and then pan control to control the levels of the two channels.
Cue Section
1/4" Headphone jack along with level control
Fader control to listen to the main mix, cue mix, or an adjustable mix of the two.
Expandable
Bartenders can be cascaded to create 8ch, 12ch, or 16ch mixer. The main level is what is sent the main level control can act as a group control.
Barbacks can be added to add 2ch to your mix. Barbacks can also be cascaded enabling up to a 16ch mixer configuration.
Send-VCA can be added for CV control of the level of the send.
DVCA, Cast Iron, Mingles, and USB-2CH can all be connected with Dupont cables (aka female to female breadboard cables) via pin headers on the back of the modules. Connecting the in and out pins will send/receive the audio into the next module.
Width: 24hp
12V: 260mA
-12V: 225mA
1 in stock $356.00
Click for better price!
or call +44 20 7424 1960
quote 1004400
quote 1004400
People also bought...
After Later Audio Beehive Plaits Redesigned Module (drum/noise/oscillator/synth voice/digital synth module)
Cat: 805370 Rel: 28 Jan 21
Macro oscillator module
Notes: Third-party clone of the open-source Mutable Instruments Plaits oscillator/sound source. All the same functionality in a compact 8hp format with full-size knobs for the key functions.
Supplier's Notes:
Functionally identical clone of the Mutable Instruments Plaits. Beehive strikes a nice balance between size, reducing 12hp down to 8hp, and playability by offering full size knobs for the four main functions. Beehive also retains the same depth of the original module at 25mm. This module uses After Later's new aluminum knobs which have a nice non-slip texture and allow for more finger space over the standard 1900H Davies knobs.
… Read moreSupplier's Notes:
Functionally identical clone of the Mutable Instruments Plaits. Beehive strikes a nice balance between size, reducing 12hp down to 8hp, and playability by offering full size knobs for the four main functions. Beehive also retains the same depth of the original module at 25mm. This module uses After Later's new aluminum knobs which have a nice non-slip texture and allow for more finger space over the standard 1900H Davies knobs.
1 in stock $205.50
Click for better price!
or call +44 20 7424 1960
quote 805370
quote 805370
People also bought...
After Later Audio Benjolin V2 Dual Oscillator & Multimode Filter Module (filter/LFO/oscillator/random synth module)
Cat: 804979 Rel: 14 Jan 21
Dual oscillator/multimode filter module
Notes: Revised take on the excellent Benjolin dual oscillator and filter from Rob Hordijk, featuring the 'rungler' stepped CV generator and extensive output options.
Supplier's Notes:
Benjolin V2 - Rob Hordijk's latest revision of the classic Benjolin. The core of the Benjolin continues to be two oscillators, the rungler (stepped CV generator), and a multimode filter.
This latest revision adds:
Reworked oscillator and filter sections
All levels are adjusted to eurorack standards
Two different steps modes (8/16 and 127)
Double and single clock rate
Externally clockable
External filter input with blend control
… Read moreSupplier's Notes:
Benjolin V2 - Rob Hordijk's latest revision of the classic Benjolin. The core of the Benjolin continues to be two oscillators, the rungler (stepped CV generator), and a multimode filter.
This latest revision adds:
Reworked oscillator and filter sections
All levels are adjusted to eurorack standards
Two different steps modes (8/16 and 127)
Double and single clock rate
Externally clockable
External filter input with blend control
2 in stock $311.36
Click for better price!
or call +44 20 7424 1960
quote 804979
quote 804979
People also bought...
After Later Audio Cara Micro Marbles Redesigned Module (clock generator/clock modulator/function generator/quantizer/random/sample & hold synth module)
Cat: 805377 Rel: 14 Jan 21
Random sampler module/rebuild of Mutable Instruments Marbles
Notes: Cara (uMarbles)
This is a new build of a micro version of Mutable Instruments Marbles. It retains all the functionality of the original full-sized module but takes up less space. It comes with jack lights that can be disabled via a jumper on the back.
These modules use tall bushing potentiometers to offer a more stable feel. You can see the difference in the last picture. You will feel much less wiggle with the tall bushing (left) than with traditional trimmer style (right).
The module is fully assembled, tested, and calibrated. The calibration is done with a 6.5 digit multimeter, itself recently calibrated, to ensure you get the highest accuracy from your module. Eurorack power cable included.
Width: 10HP
Depth: 34mm
Height: 3U
Power Consumption: +12V: 80mA -12V: 20mA
… Read moreThis is a new build of a micro version of Mutable Instruments Marbles. It retains all the functionality of the original full-sized module but takes up less space. It comes with jack lights that can be disabled via a jumper on the back.
These modules use tall bushing potentiometers to offer a more stable feel. You can see the difference in the last picture. You will feel much less wiggle with the tall bushing (left) than with traditional trimmer style (right).
The module is fully assembled, tested, and calibrated. The calibration is done with a 6.5 digit multimeter, itself recently calibrated, to ensure you get the highest accuracy from your module. Eurorack power cable included.
Width: 10HP
Depth: 34mm
Height: 3U
Power Consumption: +12V: 80mA -12V: 20mA
1 in stock $236.63
Click for better price!
or call +44 20 7424 1960
quote 805377
quote 805377
People also bought...
After Later Audio Cast Iron Voltage Controlled Panner Module (panning/mixer/VCA/dual/stereo module)
Cat: 1004354 Rel: 11 Mar 24
Voltage controlled panner module
Notes: A simple VC panner with CV-controlled level. The left input normals to the right input to give an easy way to add panning to a mono signal.
Expandable
Bartender, Barbacks, DVCA, Cast Iron, Mingles, and USB-2CH can all be connected with Dupont cables (aka female to female breadboard cables) via pin headers on the back of the modules. Connecting the in and out pins will send/receive the audio into the next module.
Width: 4hp
12V: 40mA
-12V: 40mA
… Read moreExpandable
Bartender, Barbacks, DVCA, Cast Iron, Mingles, and USB-2CH can all be connected with Dupont cables (aka female to female breadboard cables) via pin headers on the back of the modules. Connecting the in and out pins will send/receive the audio into the next module.
Width: 4hp
12V: 40mA
-12V: 40mA
1 in stock $76.81
Click for better price!
or call +44 20 7424 1960
quote 1004354
quote 1004354
People also bought...
After Later Audio Cloverleaf 1U Case Jack Interface Module For Intellijel Cases With Headphone Amp (interface synth module)
Cat: 900389 Rel: 21 Sep 22
An interface for the case 1/4" jacks in Intelljel cases
Notes: An interface for the case 1/4" jacks in Intelljel cases. The jacks are marked as if they are part of the case, so the jacks marked out, require an input.
The module sports both input and output for either a consumer line level (0.447Vpk) or a professional line level (1.095Vpk). These levels are controllable via jumper on the back of the module. It can also have a single input and output channel switched to pedal level. The case output is fed to the headphone amp that has a corresponding level control. The module otherwise does not have any level control and relies on using a VCA or other module to perform any level controls.
The module can essentially be run in one of three modes:
1) Stereo line level in and out
2) Stereo line level in and out via the left side and mono pedal in and out on the right side. In this mode the stereo line levels leverage TRS on the 1/4" jacks. You can use the included 3.5mm couplers to get TRS on the 3.5mm side.
3) Mono line level in and out via the left side and mono pedal in and out on the right side.
For Palette 64hp users only have two 1/4" jacks. You can choose if you want to use the case jacks as either inputs, outputs, or one input and one output.
… Read moreThe module sports both input and output for either a consumer line level (0.447Vpk) or a professional line level (1.095Vpk). These levels are controllable via jumper on the back of the module. It can also have a single input and output channel switched to pedal level. The case output is fed to the headphone amp that has a corresponding level control. The module otherwise does not have any level control and relies on using a VCA or other module to perform any level controls.
The module can essentially be run in one of three modes:
1) Stereo line level in and out
2) Stereo line level in and out via the left side and mono pedal in and out on the right side. In this mode the stereo line levels leverage TRS on the 1/4" jacks. You can use the included 3.5mm couplers to get TRS on the 3.5mm side.
3) Mono line level in and out via the left side and mono pedal in and out on the right side.
For Palette 64hp users only have two 1/4" jacks. You can choose if you want to use the case jacks as either inputs, outputs, or one input and one output.
1 in stock $96.51
Click for better price!
or call +44 20 7424 1960
quote 900389
quote 900389
People also bought...
After Later Audio Cumulus Clouds-Redesigned Module (distortion/effect/reverb module)
Cat: 900381 Rel: 20 Sep 22
Replica of the Mutable Instruments Clouds.
Notes: This is an exact hardware replica of the Mutable Instruments Clouds.
… Read more 1 in stock $196.15
Click for better price!
or call +44 20 7424 1960
quote 900381
quote 900381
People also bought...
After Later Audio Dice Marbles-Redesigned Module (random/sequencer synth module)
Cat: 900384 Rel: 20 Sep 22
Replica of the Mutable Instruments Marbles.
Notes: This is an exact hardware replica of the Mutable Instruments Marbles.
… Read more 1 in stock $267.77
Click for better price!
or call +44 20 7424 1960
quote 900384
quote 900384
People also bought...
After Later Audio DVCA Dual VCA Veils Redesigned Module (dual/stereo/VCA synth module)
Cat: 805403 Rel: 14 Jan 21
Dual VCA module/rebuild of Mutable Instruments Veils
Notes: DVCA
DVCA is a dual VCA based on the Mutable Instruments Veils. It features two separate voltage-controlled amplifiers, both with a gain and a response curve potentiometer, that is variable from linear to exponential. The outputs are normalized, so when no patch cable is present on output 1, output 2 will contain both signals, allowing the module to be used as a mixer. Several DVCAs can be daisy-chained for voltage-controlled mixer operation. It comes with jack lights that can be disabled via a jumper on the back.
These modules use tall bushing potentiometers to offer a more stable feel.
The module is fully assembled and tested. Eurorack power cable included.
… Read moreDVCA is a dual VCA based on the Mutable Instruments Veils. It features two separate voltage-controlled amplifiers, both with a gain and a response curve potentiometer, that is variable from linear to exponential. The outputs are normalized, so when no patch cable is present on output 1, output 2 will contain both signals, allowing the module to be used as a mixer. Several DVCAs can be daisy-chained for voltage-controlled mixer operation. It comes with jack lights that can be disabled via a jumper on the back.
These modules use tall bushing potentiometers to offer a more stable feel.
The module is fully assembled and tested. Eurorack power cable included.
2 in stock $105.03
Click for better price!
or call +44 20 7424 1960
quote 805403
quote 805403
People also bought...
After Later Audio Enigma Expander Module For Alan Turing Machine (expander synth module)
Cat: 805421 Rel: 14 Jan 21
Expander module for After Later Alan
Notes: Enigma Expander for micro Turing Machine (Alan)
An expander for After Later's Alan module (a smaller version of the Turing Machine) that enables you to manipulate the stepped CV sequence. This enables you to create a different, yet related sequence to the main Alan output.
The module comes with the required cable to connect to the main module. Our black and gold panel is designed to complement Alan, Aftter Later's micro version of the Turing Machine.
The module comes with a 1 year warranty.
… Read moreAn expander for After Later's Alan module (a smaller version of the Turing Machine) that enables you to manipulate the stepped CV sequence. This enables you to create a different, yet related sequence to the main Alan output.
The module comes with the required cable to connect to the main module. Our black and gold panel is designed to complement Alan, Aftter Later's micro version of the Turing Machine.
The module comes with a 1 year warranty.
2 in stock $59.95
Click for better price!
or call +44 20 7424 1960
quote 805421
quote 805421
People also bought...
After Later Audio Fuse Cross Modulator Warps Redesigned Module (digital/oscillator/pitch shifter/ring modulator/waveshaper synth module)
Cat: 910104 Rel: 21 Nov 22
A full size version of Mutable Instruments Warps.
Notes: A full size version of Mutable Instruments Warps. It is functionally identical and will run all firmware that ran on the original.
Width: 10hp
12V: 110mA
-12V: 5mA
… Read moreWidth: 10hp
12V: 110mA
-12V: 5mA
1 in stock $217.95
Click for better price!
or call +44 20 7424 1960
quote 910104
quote 910104
People also bought...
After Later Audio Knit Plaits Redesigned Module (digital/oscillator synth module)
Cat: 805451 Rel: 14 Jan 21
Micro sized macro oscillator module
Notes: This is a new build of a micro sized Mutable Instruments Plaits called Knit.
These modules use tall bushing potentiometers to offer a more stable feel.
The module is fully assembled, tested, and calibrated. Eurorack power cable is included.
Width: 6HP
Depth: 25mm
Height: 3U
Power Consumption: 12V: 50mA -12V: 5mA
… Read moreThese modules use tall bushing potentiometers to offer a more stable feel.
The module is fully assembled, tested, and calibrated. Eurorack power cable is included.
Width: 6HP
Depth: 25mm
Height: 3U
Power Consumption: 12V: 50mA -12V: 5mA
2 in stock $212.77
Click for better price!
or call +44 20 7424 1960
quote 805451
quote 805451
People also bought...
After Later Audio Mingles Dual 3-Channel Mixer & Voltage Controlled Panner Module (mixer/panning module)
Cat: 1004349 Rel: 11 Mar 24
3-channel mixer & voltage controlled panner module
Notes: Dual three channel voltage controlled panning mixer
Mixer section
Channel 1 and Channel 2 are three channel mixers with potentiometers to control level of three different inputs for each channel. Each channel then has a potentiometer to control panning as well as CV control for panning and level control
Panning and VCA
The VC panners are equal loudness panning and the VCAs for each channel are linear response.
Built-in LFO
There is a built-in LFO that is normalled to the panning CV input of each channel. CH1 gets the standard LFO and CH2 gets an inverse, enabling alternating channel panning. The default is to use a TRI wave for the LFO, but there is a jumper on the back to switch it to SQU.
Width: 12hp
12V: 140mA
-12V: 120mA
… Read moreMixer section
Channel 1 and Channel 2 are three channel mixers with potentiometers to control level of three different inputs for each channel. Each channel then has a potentiometer to control panning as well as CV control for panning and level control
Panning and VCA
The VC panners are equal loudness panning and the VCAs for each channel are linear response.
Built-in LFO
There is a built-in LFO that is normalled to the panning CV input of each channel. CH1 gets the standard LFO and CH2 gets an inverse, enabling alternating channel panning. The default is to use a TRI wave for the LFO, but there is a jumper on the back to switch it to SQU.
Width: 12hp
12V: 140mA
-12V: 120mA
1 in stock $168.13
Click for better price!
or call +44 20 7424 1960
quote 1004349
quote 1004349
People also bought...
After Later Audio Monsoon Clouds Redesigned Module (delay/digital/effect/pitch shifter/sampling synth module)
Cat: 805454 Rel: 14 Jan 21
Texture analogue synthesiser
Notes: This is a new build of a Monsoon, which is a variation of Mutable Instruments Clouds with separate CV and controls for the 4 "blend" functions. The 4 LEDs on the sliders indicate incoming control voltage for the 4 main parameters. The button which was used to select blend parameters now simply switches what the 4 LEDs display (audio input monitoring or monitoring the 4 blend amounts.) Parasites 2.01 firmware is loaded by default. Alternative firmware can be loaded by request.
The module is fully assembled, tested, and calibrated. Eurorack power cable is included.
Width: 12HP
Depth: 22mm
Height: 3U
Power Consumption: +12V:120mA -12V:10mA
… Read moreThe module is fully assembled, tested, and calibrated. Eurorack power cable is included.
Width: 12HP
Depth: 22mm
Height: 3U
Power Consumption: +12V:120mA -12V:10mA
2 in stock $222.11
Click for better price!
or call +44 20 7424 1960
quote 805454
quote 805454
People also bought...
After Later Audio Morcom Expander Module For Alan Turing Machine (expander synth module)
Cat: 805517 Rel: 14 Jan 21
Expander module for After Later Alan
Notes: Morcom Expander for micro Turing Machine (Alan)
An expander for After Later's Alan module (a smaller version of the Turing Machine) that exposes the pulse outputs from the main Alan module. You get 7 seven random outputs and then 4 that are derived from other 7 outputs. When 1 and 2 are high then the 1+2 outputs is high. You can get some great rhythmic effects using these in conjunction with the main stepped CV output.
The module comes with the required cable to connect to the main module. The panel is designed to compliment Alan, After Later's micro version of the Turing Machine.
The module comes with a 1 year warranty.
… Read moreAn expander for After Later's Alan module (a smaller version of the Turing Machine) that exposes the pulse outputs from the main Alan module. You get 7 seven random outputs and then 4 that are derived from other 7 outputs. When 1 and 2 are high then the 1+2 outputs is high. You can get some great rhythmic effects using these in conjunction with the main stepped CV output.
The module comes with the required cable to connect to the main module. The panel is designed to compliment Alan, After Later's micro version of the Turing Machine.
The module comes with a 1 year warranty.
2 in stock $55.28
Click for better price!
or call +44 20 7424 1960
quote 805517
quote 805517
People also bought...
After Later Audio Mult Buffered/Active Multiple Module With LED Indicator (multiple synth module)
Cat: 805154 Rel: 14 Jan 21
Buffered/active multiple module
Notes: This is a buffered/active mult with LED indicator. You get two channels of 1 to 3 multiples within a 2HP module. The output of channel 1 is normalled to channel 2 so it can also be treated as a 1 to 6 multiple as well.
Active vs Passive mults:
With a passive mult you are effectively just plugging multiple things into the same jacks. This will often cause some voltage drop in each of the signals. With an active (or buffered) mult you will not get any voltage drop from the original signal.
Comes with a black and gold panel, power cable and one year warranty.
Usage note:
The red stripe of the power ribbon cable goes towards the top of this module.
… Read moreActive vs Passive mults:
With a passive mult you are effectively just plugging multiple things into the same jacks. This will often cause some voltage drop in each of the signals. With an active (or buffered) mult you will not get any voltage drop from the original signal.
Comes with a black and gold panel, power cable and one year warranty.
Usage note:
The red stripe of the power ribbon cable goes towards the top of this module.
1 in stock $55.28
Click for better price!
or call +44 20 7424 1960
quote 805154
quote 805154
People also bought...
After Later Audio nRings Micro Version Of Rings Module (digital/effect/filter/oscillator/synth voice synth module)
Cat: 805521 Rel: 14 Jan 21
Resonator module/rebuild of Mutable Instruments Rings
Notes: nRings
This is a new build of a micro version of Rings from Mutable Instruments. MicroRings, also called NanoRings, retains all the same functionality as a full-size Rings module.
The module is fully assembled, tested, and calibrated. Eurorack power cable is included.
These modules use tall bushing potentiometers to offer a more stable feel.
… Read moreThis is a new build of a micro version of Rings from Mutable Instruments. MicroRings, also called NanoRings, retains all the same functionality as a full-size Rings module.
The module is fully assembled, tested, and calibrated. Eurorack power cable is included.
These modules use tall bushing potentiometers to offer a more stable feel.
1 in stock $184.75
Click for better price!
or call +44 20 7424 1960
quote 805521
quote 805521
People also bought...
After Later Audio Pachinko Marbles Redesigned Module (clock generator/clock modulator/quantizer/random/sequencer synth module)
Cat: 805525 Rel: 14 Jan 21
Random sampler module/rebuild of Mutable Instruments Marbles
Notes: This is a brand new build of a JakPlugg designed Pachinko, which is a micro version of Mutable Instruments Marbles. It retains all of the functionality of the original but takes up less space (12HP) than the original Marbles (18HP).
The module is fully assembled, tested, and calibrated. The calibration is done with a 6.5 digit multimeter, itself recently calibrated, to ensure you get the highest accuracy from your module.
The panel is a custom black After Later Audio panel that offers metallic gold accents.
The module comes with a power cable and a 1 year warranty.
… Read moreThe module is fully assembled, tested, and calibrated. The calibration is done with a 6.5 digit multimeter, itself recently calibrated, to ensure you get the highest accuracy from your module.
The panel is a custom black After Later Audio panel that offers metallic gold accents.
The module comes with a power cable and a 1 year warranty.
1 in stock $235.60
Click for better price!
or call +44 20 7424 1960
quote 805525
quote 805525
People also bought...
After Later Audio Pique 1U Peaks Replica Module (digital/drum/envelope generator/LFO/sequencer synth module)
Cat: 805532 Rel: 14 Jan 21
Envelope/LFO/tap LFO/Drum generator module/rebuild of Mutable Instruments Peaks
Notes: Pique (uPeaks) 1U Intellijel Format
This is a 1U (Intellijel format) version of the Pique module which is based on the popular Peaks module from Mutable Instruments. It can be an ADSR-style envelope generator, an LFO and a drum emulator.
The module is calibrated, comes with a power cable, and a one year warranty.
… Read moreThis is a 1U (Intellijel format) version of the Pique module which is based on the popular Peaks module from Mutable Instruments. It can be an ADSR-style envelope generator, an LFO and a drum emulator.
The module is calibrated, comes with a power cable, and a one year warranty.
1 in stock $165.55
Click for better price!
or call +44 20 7424 1960
quote 805532
quote 805532
People also bought...
After Later Audio Pixie Macro Oscillator Module (oscillator/synth voice/digital/drum/LFO/noise synth module)
Cat: 916825 Rel: 16 Dec 22
This is an exact hardware replica of the Mutable Instruments Plaits module.
Notes: This is an exact hardware replica of the Mutable Instruments Plaits module.
Width: 12hp
12V: 50mA
-12V: 5mA
… Read moreWidth: 12hp
12V: 50mA
-12V: 5mA
1 in stock $223.14
Click for better price!
or call +44 20 7424 1960
quote 916825
quote 916825
People also bought...
After Later Audio Popple Multimode Stereo Filter Module (filter/dual/stereo synth module)
Cat: 805174 Rel: 14 Jan 21
Stereo multimode filter module
Notes: Popple is an 8hp multimode stereo filter based on the Mutable Instruments Ripples V1 filter section. Popple maintains the buttery smoothness of Ripples filter while giving you two separate audio paths. The audio paths share a resonance, control, a frequency cutoff control, resonance CV input, and a v/oct cutoff CV input. Each channel then has it’s own cutoff CV input with attenuverters (which are normalled to a 2.5V signal).
Popple will also self-oscillate at high resonance settings, when coupled with the v/oct CV control, it can also act as a dual sine wave oscillator.
… Read morePopple will also self-oscillate at high resonance settings, when coupled with the v/oct CV control, it can also act as a dual sine wave oscillator.
1 in stock $190.97
Click for better price!
or call +44 20 7424 1960
quote 805174
quote 805174
People also bought...
After Later Audio Quarks Elements Redesigned Module (filter/multiple/oscillator synth module)
Cat: 910113 Rel: 21 Nov 22
A 22hp version of Mutable Instruments Elements.
Notes: A 22hp version of Mutable Instruments Elements. It is functionally equivalent and therefore runs all firmware options and having identical sound characteristics. This version is great compromise between the tight spacing of Atom and full size original, which is a bit large.
Width: 22hp
12V: 130mA
-12V: 10mA
Module power connector can be connected either way on the module side.
… Read moreWidth: 22hp
12V: 130mA
-12V: 10mA
Module power connector can be connected either way on the module side.
2 in stock $255.32
Click for better price!
or call +44 20 7424 1960
quote 910113
quote 910113
People also bought...
After Later Audio Razor Blades Redesigned Module (distortion/filter/waveshaper synth module)
Cat: 910116 Rel: 21 Nov 22
This is an exact hardware replica of the Mutable Instruments Blades module.
Notes: This is an exact hardware replica of the Mutable Instruments Blades module.
This model uses the original "hard-to-find" opamps, but After Later have substituted V2164M with AS2164D. All of After Later's products use AS2164D and there should be no measurable change in behaviour.
… Read moreThis model uses the original "hard-to-find" opamps, but After Later have substituted V2164M with AS2164D. All of After Later's products use AS2164D and there should be no measurable change in behaviour.
2 in stock $332.13
Click for better price!
or call +44 20 7424 1960
quote 910116
quote 910116
People also bought...
After Later Audio Resonate Rings-Redesigned Module (external/oscillator/filter synth module)
Cat: 900386 Rel: 20 Sep 22
Replica of the Mutable Instruments Rings module.
Notes: After Later's redesigned take on the classic Mutable Instruments Rings module offers all the distinctive resonant synth sounds you'd expect, from strings to percussion. Great value.
Supplier notes:
This is an exact hardware replica of the Mutable Instruments Rings module.
… Read moreSupplier notes:
This is an exact hardware replica of the Mutable Instruments Rings module.
3 in stock $195.13
Click for better price!
or call +44 20 7424 1960
quote 900386
quote 900386
People also bought...
After Later Audio Scenes Segment Generator Module (CV modulation/envelope generator/LFO/sample & hold/sequencer/slew limiter sytnh module)
Cat: 949327 Rel: 07 Jun 23
An exact hardware replica of the Mutable Instruments Stages in 14HP.
Notes: Six segment generator. Looping or one shot envelope generator. Chainable, so it can be expanded to link multiple units.
An exact hardware replica of the Mutable Instruments Stages.
Dimensions
14 HP
25 mm deep
Current Draw
80 mA +12V
20 mA -12V
0 mA 5V
… Read moreAn exact hardware replica of the Mutable Instruments Stages.
Dimensions
14 HP
25 mm deep
Current Draw
80 mA +12V
20 mA -12V
0 mA 5V
1 in stock $267.77
Click for better price!
or call +44 20 7424 1960
quote 949327
quote 949327
People also bought...
After Later Audio Scenes Segment Generator Module (B-STOCK) (CV modulation/envelope generator/LFO/sample & hold/sequencer/slew limiter sytnh module)
Cat: 993716 Rel: 01 Jan 90
B-STOCK: Item refurbished, repaired and in perfect working order.
Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***
Six segment generator. Looping or one shot envelope generator. Chainable, so it can be expanded to link multiple units.
An exact hardware replica of the Mutable Instruments Stages.
Dimensions
14 HP
25 mm deep
Current Draw
80 mA +12V
20 mA -12V
0 mA 5V
… Read moreSix segment generator. Looping or one shot envelope generator. Chainable, so it can be expanded to link multiple units.
An exact hardware replica of the Mutable Instruments Stages.
Dimensions
14 HP
25 mm deep
Current Draw
80 mA +12V
20 mA -12V
0 mA 5V
1 in stock $251.16
People also bought...
After Later Audio Send VCA Expander Module For Bartender & Barback (expander/VCA module)
Cat: 1004338 Rel: 11 Mar 24
Expander module for Bartender & Barback - 2HP
Notes: This is an expander for Bartender and Barback, enabling CV control of the level of the send bus of up to 8 channels.
Each section of four jacks has a cable to connect to the mixer modules. To get 4 channels to work with Barback you want to connect it to the last Barback in the chain of two. It will then pass along channels 3 & 4 to the next Barback.
Dimensions
2 HP
Current Draw
Module does not draw current
… Read moreEach section of four jacks has a cable to connect to the mixer modules. To get 4 channels to work with Barback you want to connect it to the last Barback in the chain of two. It will then pass along channels 3 & 4 to the next Barback.
Dimensions
2 HP
Current Draw
Module does not draw current
1 in stock $31.13
People also bought...
After Later Audio SHTH 1U Sample & Hold - Track & Hold Module (black/gold) (noise/random/sample & hold synth module)
Cat: 910119 Rel: 21 Nov 22
SHTH - Sample and Hold - Track and Hold
Notes: SHTH - Sample and Hold - Track and Hold
Create stepped outputs using two different classic synthesis techniques, sample & hold and/or track & hold.
Sample & Hold
The top four jacks make up the sample and hold section. There is a noise output that is normalled to the input so you can pass a gate/trig signal into the SAMP input to get a stepped output at the OUT jack.
IN - Signal that will be sampled, normalled to NSE output
SAMP - When high updates the voltage being sent to the output
NSE - White noise output
OUT - The sampled output (freezes the value from the IN jack when the SAMP jack receives a high signal)
Track & Hold
The bottom four jacks make up the track and hold section. There is a walk signal (a randomish meandering voltage) that is normalled to the input. Track and hold is the opposite of sample and hold in that it will pass the IN value to the OUT jack until the TRACK input receives a high gate. While the TRACK input is high it will hold the value. After the TRACK input goes low, it will begin tracking the IN signal again.
IN - Signal that will be tracked
TRACK - When high the value will be held at the output
WALK - A meandering voltage
OUT - The track output (follows IN while TRACK is low, held voltage while TRACK is high)
CC-BY-SA Emelie Gillett
… Read moreCreate stepped outputs using two different classic synthesis techniques, sample & hold and/or track & hold.
Sample & Hold
The top four jacks make up the sample and hold section. There is a noise output that is normalled to the input so you can pass a gate/trig signal into the SAMP input to get a stepped output at the OUT jack.
IN - Signal that will be sampled, normalled to NSE output
SAMP - When high updates the voltage being sent to the output
NSE - White noise output
OUT - The sampled output (freezes the value from the IN jack when the SAMP jack receives a high signal)
Track & Hold
The bottom four jacks make up the track and hold section. There is a walk signal (a randomish meandering voltage) that is normalled to the input. Track and hold is the opposite of sample and hold in that it will pass the IN value to the OUT jack until the TRACK input receives a high gate. While the TRACK input is high it will hold the value. After the TRACK input goes low, it will begin tracking the IN signal again.
IN - Signal that will be tracked
TRACK - When high the value will be held at the output
WALK - A meandering voltage
OUT - The track output (follows IN while TRACK is low, held voltage while TRACK is high)
CC-BY-SA Emelie Gillett
1 in stock $101.71
Click for better price!
or call +44 20 7424 1960
quote 910119
quote 910119
People also bought...
After Later Audio SHTH Sample & Hold/Track & Hold Module (LFO/noise/sample & hold/utility synth module)
Cat: 857269 Rel: 09 Dec 21
Module that allows stepped output via sample & hold and track & hold techniques
Notes: SHTH - Sample and Hold - Track and Hold
Create stepped outputs using two different classic synthesis techniques, sample & hold and/or track & hold.
Sample & Hold
The top four jacks make up the sample and hold section. There is a noise output that is normalled to the input so you can pass a gate/trig signal into the SAMP input to get a stepped output at the OUT jack.
IN - Signal that will be sampled, normalled to NSE output
SAMP - When high updates the voltage being sent to the output
NSE - White noise output
OUT - The sampled output (freezes the value from the IN jack when the SAMP jack receives a high signal)
Track & Hold
The bottom four jacks make up the track and hold section. There is a walk signal (a randomish meandering voltage) that is normalled to the input. Track and hold is the opposite of sample and hold in that it will pass the IN value to the OUT jack until the TRACK input receives a high gate. While the TRACK input is high it will hold the value. After the TRACK input goes low, it will begin tracking the IN signal again.
IN - Signal that will be tracked
TRACK - When high the value will be held at the output
WALK - A meandering voltage
OUT - The track output (follows IN while TRACK is low, held voltage while TRACK is high)
… Read moreCreate stepped outputs using two different classic synthesis techniques, sample & hold and/or track & hold.
Sample & Hold
The top four jacks make up the sample and hold section. There is a noise output that is normalled to the input so you can pass a gate/trig signal into the SAMP input to get a stepped output at the OUT jack.
IN - Signal that will be sampled, normalled to NSE output
SAMP - When high updates the voltage being sent to the output
NSE - White noise output
OUT - The sampled output (freezes the value from the IN jack when the SAMP jack receives a high signal)
Track & Hold
The bottom four jacks make up the track and hold section. There is a walk signal (a randomish meandering voltage) that is normalled to the input. Track and hold is the opposite of sample and hold in that it will pass the IN value to the OUT jack until the TRACK input receives a high gate. While the TRACK input is high it will hold the value. After the TRACK input goes low, it will begin tracking the IN signal again.
IN - Signal that will be tracked
TRACK - When high the value will be held at the output
WALK - A meandering voltage
OUT - The track output (follows IN while TRACK is low, held voltage while TRACK is high)
1 in stock $85.11
Click for better price!
or call +44 20 7424 1960
quote 857269
quote 857269
People also bought...
After Later Audio Typhoon Clouds/Monsoon/Microcell Redesign Module (effect/pitch shifter/reverb/sampling/VCA/delay synth module)
Cat: 805536 Rel: 14 Jan 21
Analogue texture synthesiser/rebuild of Mutable Instruments Clouds
Notes: This is where Storm and Monsoon meet to create the latest improvements on the original Clouds design. With Typhoon you get all of the features of Storm combined with sliders and layout of Monsoon in 16hp. Typhoon runs the SuperParasites firmware, so no more having to swap between Parasites and Kammerl firmware options. Some of the notable features are:
Dedicated blend controls for Feedback, Panning, Mix, and Reverb (similar to Monsoon)
All eight modes from Parasites and Kammerl
Stereo VCAs
input/output mutes
Exponential and linear pitch controls
Universal CV routing and random CV signals
Comes with an exclusive black and gold panel, power cable and one year warranty.
… Read moreDedicated blend controls for Feedback, Panning, Mix, and Reverb (similar to Monsoon)
All eight modes from Parasites and Kammerl
Stereo VCAs
input/output mutes
Exponential and linear pitch controls
Universal CV routing and random CV signals
Comes with an exclusive black and gold panel, power cable and one year warranty.
! low stock $247.02
Click for better price!
or call +44 20 7424 1960
quote 805536
quote 805536
People also bought...
After Later Audio uGrids Grids Redesigned Module (clock generator/digital/drum/random/sequencer synth module)
Cat: 910123 Rel: 21 Nov 22
An 8hp version of the retired Mutable Instruments Grids.
Notes: An 8hp version of the retired Mutable Instruments Grids. It is an identical functional clone, so it will behave in the same was as the full size version, and will run any firmware that runs on the full size version.
… Read more 2 in stock $153.61
Click for better price!
or call +44 20 7424 1960
quote 910123
quote 910123
