Juno Daily

Music and tech news, interviews, features, reviews and more.

Visit Juno Daily

100% Sicheres Einkaufen

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Sicheres Einkaufen

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices. Visit Juno DJ

today only
USD
Meine Sprache
Meine Währung
Your wishlist is empty
Items in wishlist:
Recently added:
Loading...
Cart
Dein Warenkorb ist leer.
Items in cart:
Zwischensumme:
Recently added:
Loading...
Warenkorb anzeigen
Startseite  All genres  All genres  

Suchergebnisse: Dance Music

Filter

Saved Searches
Release Date
Featured
Artikel 1 bis 50 von 102 auf Seite 1 von 3 anzeigen
1  2  3  »
After Later Audio Scenes Segment Generator Module (B-STOCK)
After Later Audio Scenes Segment Generator Module (B-STOCK) (CV modulation/envelope generator/LFO/sample & hold/sequencer/slew limiter sytnh module)
Cat: 993716 Rel: 01 Jan 90 • View all Synth modules
 
B-STOCK: Item refurbished, repaired and in perfect working order.
Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Six segment generator. Looping or one shot envelope generator. Chainable, so it can be expanded to link multiple units.

An exact hardware replica of the Mutable Instruments Stages.

Dimensions
14 HP
25 mm deep

Current Draw
80 mA +12V
20 mA -12V
0 mA 5V
Read more
MRP:$282.94 SAVE 10%
 1 in stock $254.52
AJH Synth/Tone Science Triple Cross XFader Panner Module (silver)
AJH Synth/Tone Science Triple Cross XFader Panner Module (silver) (attenuator/dual/stereo/mixer/panning/utility/VCA synth module)
Cat: 944987 Rel: 20 Oct 23 • View all Synth modules
 
A crossfader panner module in 14HP
Notes: The Tone Science Triple Cross module is a design collaboration between electronic musician/composer Ian Boddy and AJH Synth.

It features three independant cross fader and panner channels, and it can be used with both audio and CV signals. Each of the channels can be configured in one of four different ways:

1) One In, One out Linear VCA

2) Two in, One out crossfader

3) One in, Two out panner,

4) Two in, Two out cross fader & reversing panner combined.

Audio rate modulation can also be used on the CV inputs to create Ring modulation and Cross modulation type sounds. Each channel has a dedicated Fade control, CV input, and CV Level attenuverter. These can be used together to bias incoming CV signals.

The L1 and L2 outputs from channels 1 and 2 are normalised to channel 3's inputs, which also have their own level controls to balance incoming signals. This allows very interesting, complex fading and panning between four different input sources, to either Mono or Stereo outputs..

The Triple Cross is very versatile, yet relatively simple to understand and use. However, as they say "knowledge is power", so do spend a little time reading about how to configure the channels in the four different modes, and how to combine all three channels together to create a super-powerful Four to Two to One cross fader.
Each of the three channels can be configured in four different ways, and all three can be used simultaneously. They do not all have to be in the same mode, so we could for example use channel 1 as a cross fader, channel 2 as a Panner for completely different signals, and channel 3 as a Linear VCA, again for different signals.

Specifications

Effective CV Range for CV-1, CV-2 and CV-3 is 0 to +5V with attenuverter fully clockwise or 0 to -5V with attenuverter fully anticlockwise.
Maximum permissible CV Range for CV-1, CV-2 and CV-3 is -12 to +12V
IN 1A to IN 3B Input levels -5V to +5V, levels up to +/-10V are possible however some clipping may occur.
Module Width: 14hp
Module Depth: 26mm (Including power lead)
Current Usage: 80mA Positive, 72mA Negative
Read more
 1 in stock $272.42
Click for better price!
or call +44 20 7424 1960
quote 944987
Akai Professional APC64 Ableton Live MIDI Controller With Sequencer & Touchstrips Akai Professional APC64 Ableton Live MIDI Controller With Sequencer & Touchstrips Akai Professional APC64 Ableton Live MIDI Controller With Sequencer & Touchstrips Akai Professional APC64 Ableton Live MIDI Controller With Sequencer & Touchstrips
Cat: 973135 Rel: 10 Oct 23 • View all MIDI-Controller bei Juno
 
Ableton Live controller with 64 velocity-sensitive pads and 8 assignable touch strips
Notes: The next generation of Ableton Live controller from Akai, the APC64 is designed for seamless integration with the software, or as a standalone step sequencer and controller. The 64 velocity sensitive pads handle playing, recording, clip launching, sequencing and much more, while eight assignable touch strips offer extensive hands-on control.

Supplier's notes:

APC64; Next generation Ableton live controller.

Touch the future

Leap into a new world of musical possibility in the studio, on stage, and anywhere creativity leads you with the powerful APC64.

Ableton live controller; with sequencer and touchstrips

The new Akai Professional APC64 is a powerful next-generation Ableton Live controller for studio and live performance.

It features 64 RGB velocity-sensitive pads with poly aftertouch, and 8 fully assignable Touch Strips for instant hands-on control of devices, pitch, modulation, and much more. APC64 also works as a standalone 32-step 8-track Step Sequencer and controller with 3 MIDI ports and 8 CV/Gate outputs to take full control of synths, drum machines, or modular rack devices.

In-depth control of Ableton Live

Enter the matrix

APC64 features a vibrant 8x8 pad matrix of 64 velocity-sensitive RGB pads with poly aftertouch for playing chords, synth leads, Ableton Live's Drum Racks and of course launching Clips in Session View.

Touch the future

Add a whole new level of expression and control to your music production and live performances with 8 fully assignable Touch Strips with RGB LED indicators. Get control of Ableton Live's devices - including Auto Filter, Delay, Reverb, Impulse, Simpler and more - right at your fingertips. Adjust macros, mixer volume, pan, and effects sends as well as writing automation.

Visual feedback and control

APC64 includes a smart colour LED screen with a fast push encoder for real-time visual feedback of your parameters. Move around Ableton Live's devices and mixing environments while keeping track of each parameter on the screen. APC64 also features dedicated transport control with Play, Stop, and Record for capturing your ideas along with 8 Track Mute and Solo buttons for mixing and live performance.

Standalone step sequencing

APC64 features an internal 32-step 8-track Step Sequencer enabling completely DAW-less control of your favourite synths. With 8 CV/Gate outputs and 3 1/8" MIDI ports, you can connect, sequence, and capture your favourite modular racks, keyboards, classic drum machines, and more. Add continuous control and expression using the 8 Touch Strips for a whole new level of performance. Apply additional creative dimensions to MIDI notes using the Probability, Velocity, and Mutate functions for further experimentation.

Powerful production and performance

APC64 facilitates a seamless workflow within Ableton Live; from triggering samples and loops in Ableton Live's Drum Rack, all the way to writing expressive melodies using the Notes, Scale, and Chord modes. Use the onboard Step Sequencer to generate inventive melodic patterns that can be instantly transferred to Ableton Live using the Send To Clip function. Apply swing and quantize to your beats or use APC64 to arm and record vocal tracks directly in Ableton Live sessions.

Ableton drum rack/simpler control

APC64 features a dedicated Drum Mode allowing you to play and record beats, loops, and slices using an Ableton Live Drum Rack or Simpler device. Capture additional inspiration using the 8 Touch Strips to control Ableton Live's FX racks during beat making and performance.

Included software bundle

Ableton Live Lite 11

APC64 Includes Ableton 11 Lite for all your software music production needs in one package to produce, perform, arrange, record, edit, mix and master your music. Live Lite includes sounds, instruments, and sequencing, recording, and arranging capabilities.

Air music instruments/plugins

APC64 Includes a collection of professional plug-in instruments and effects so you can start producing out of the box. Included are the following plugins: TubeSynth, Electric, Ether, Halfspeed, Vocal Tuner, Flavor, and the Sonivox Essential Keyboard Collection.

Custom editor software

Create your own custom layouts with the included desktop software editor for Mac/PC to personalize and store pre-sets for quick recall in standalone.

Key specs

Display
Graphical full colour LCD
Connections: USB-C, 8x 1/8" (3.5 mm) CV/Gate, 2x 1/8" (3.5 mm) MIDI Output, 1x 1/8" (3.5 mm) MIDI Input
Dimensions (width x depth x height): 10.7" x 14.6" x 1.4" 272 x 371 x 34.5 mm
Weight: 3.5 lb/1.6 kg
Read more
MRP:$347.11 SAVE 15%
 7 in stock $293.92
Click for better price!
or call +44 20 7424 1960
quote 973135
All-Pedal Galactavise Intergalactic Compression Effects Pedal All-Pedal Galactavise Intergalactic Compression Effects Pedal All-Pedal Galactavise Intergalactic Compression Effects Pedal All-Pedal Galactavise Intergalactic Compression Effects Pedal All-Pedal Galactavise Intergalactic Compression Effects Pedal All-Pedal Galactavise Intergalactic Compression Effects Pedal
Cat: 1001983 Rel: 28 Feb 24 • View all Effects pedals
 
Allpedal's flagship compressor; built with the musician's needs in mind, it boasts an uncompromisingly sweet compressor circuit with a Mix control for dialling in that perfect balance of compressed tone and clean tone.
Notes: The GALACTAVISE is Allpedal's flagship compressor. Built with the musician's needs in mind, it boasts an uncompromisingly sweet compressor circuit with a Mix control for dialling in that perfect balance of compressed tone and clean tone.

The top end can often be make or break with many compressor circuits, so AllPedal also added the ability to adjust just the right amount with the Presence control. Made with the highest quality components for a low noise floor and road-worthy durability.

Let the GALACTAVISE blast your tone into orbit!

GALACTAVISE is the best guitar compressor pedal for musicians seeking to balance their sound's dynamics. As the best compression pedal on the market, it allows guitarists to control their volume levels efficiently, ensuring a consistent sound output. This guitar compression pedal is an essential tool for both studio recording and live performance.

As with all their effect pedals, AllPedal took special care in the GALACTAVISE's aesthetics with its finish, sophisticated artwork and anodized knobs.

GALACTAVISE is proudly made by hand in Paducah, KY in the USA using the latest cutting-edge technology in the pursuit of ultimate tone.
Read more
 1 in stock $219.84
Alto Professional Uber FX2 Portable Battery-Powered 200W PA System With 320° Sound Alto Professional Uber FX2 Portable Battery-Powered 200W PA System With 320° Sound Alto Professional Uber FX2 Portable Battery-Powered 200W PA System With 320° Sound Alto Professional Uber FX2 Portable Battery-Powered 200W PA System With 320° Sound Alto Professional Uber FX2 Portable Battery-Powered 200W PA System With 320° Sound Alto Professional Uber FX2 Portable Battery-Powered 200W PA System With 320° Sound Alto Professional Uber FX2 Portable Battery-Powered 200W PA System With 320° Sound Alto Professional Uber FX2 Portable Battery-Powered 200W PA System With 320° Sound Alto Professional Uber FX2 Portable Battery-Powered 200W PA System With 320° Sound Alto Professional Uber FX2 Portable Battery-Powered 200W PA System With 320° Sound Alto Professional Uber FX2 Portable Battery-Powered 200W PA System With 320° Sound Alto Professional Uber FX2 Portable Battery-Powered 200W PA System With 320° Sound Alto Professional Uber FX2 Portable Battery-Powered 200W PA System With 320° Sound Alto Professional Uber FX2 Portable Battery-Powered 200W PA System With 320° Sound Alto Professional Uber FX2 Portable Battery-Powered 200W PA System With 320° Sound Alto Professional Uber FX2 Portable Battery-Powered 200W PA System With 320° Sound Alto Professional Uber FX2 Portable Battery-Powered 200W PA System With 320° Sound Alto Professional Uber FX2 Portable Battery-Powered 200W PA System With 320° Sound
Cat: 1007442 Rel: 14 Mar 24 • View all PA Speakers | PA Speaker Systems
 
Portable battery-powered 200W speaker with 320° sound
Notes: Excellent value here. Alto's portable speaker is designed to fill a room with just one unit, plus the option to link two units wirelessly for even bigger sound. Built-in battery gives up to 100 hours of playback from a single charge.

Supplier's Notes:
Uber FX MK2 is a powerful but portable battery powered PA system with Bluetooth technology. Its 5-speaker, 320-degree sound array is the perfect solution for delivering hours of clear, punchy sound from microphones, instruments, mobile devices and more. Uber FX MK2 is not just for musicians - it's also perfect for many other indoor and outdoor events including business meetings, training sessions, backyard parties and award/graduation ceremonies - and with up to 100 hours of charge, it doesn't matter whether you have access to AC power or not.

Powerful and Clear

The innovative 200W, 5-speaker system features an 8" Woofer, stereo tweeters and full-range side-firing drivers providing 320- of audience listening area. The side-firing speakers also make for excellent live performance monitoring. UBER FX MK2 features two input channels, each with its own independent volume control and 2-band EQ and digital effects, and there's an additional third 3.5mm aux input.

Fully Wireless

With Bluetooth 5.0, the Alto Uber FX MKII offers robust streaming, linking and control: You can stream from any device to Uber FX MK2, and wirelessly connect a second Uber FX MK2s to create a stereo PA system using your favourite music streaming app. The Alto Pro App for iOS and Android provides control of mixing functions wirelessly for convenient control from anywhere. The simple single screen mixer allows you to select a channel and control all parameters effortlessly,

Portable and Convenient

Uber FX MK2 is incredibly easy to transport with its telescoping handle and wheels; it also has a handy top storage compartment, side bottle opener and front panel lighting. There are also two USB charging ports to keep your devices topped up.

Portable battery-powered 200W speaker with 320 degree sound

320 Degree Sound
Innovative 200W, 5-speaker system fills the room
All day battery
100 hours of sound on a single charge
Easy to Transport
Less lifting with telescoping handle and wheels
Create your own Mix
Built-in 2-channel mic/line/instrument mixer with EQ and FX
Stream Music Effortlessly
Bluetooth 5.0 enabled streaming and control
Wireless Control
Alto Pro Control App on iOS and Android
Stereo Speaker Link
Expand to two speakers with Bluetooth Linking
Charge your Devices
Includes two USB charging ports
Set the Right Sound
Music and Live Performance EQ presets
Third Input
Additional 3.5mm aux input
Made for Events
Top storage compartment, side bottle opener and front lighting

Tech information

Output Power: 200 W

Charge Port: 5V, 1A

Mic Inputs 1-2
Connector: XLR / 1/4" TRS Combo Input Connector
Dynamic Range: 108 dB (A-weighted)
THD+N: <0.01%
Noise EIN: >-110 dB (A-weighted)
Maximum Input Level: +1.5 dBu
Gain Range: 50 dB
Frequency Response: 20 Hz - 20 kHz (+/- 0.1 dB)
Input Impedance: 600 O

Line Inputs 1-2
Connector: XLR / 1/4" TRS Combo Input Connector
Dynamic Range: 108 dB (A-weighted)
THD+N: <0.01%
Maximum Input Level: +16 dBu
Gain Range: 24 dB
Frequency Response: 20 Hz - 20 kHz (+/- 0.1 dB)
Input Impedance: 20 kO

Instrument Inputs 1-2
Connector: XLR / 1/4" TRS Combo Input Connector
Dynamic Range: 108 dB (A-weighted)
THD+N: <0.02%
Gain Range: 24 dB
Frequency Response: 20 Hz - 20 kHz (+/- 0.1 dB)
Maximum Input Level: +6 dBu
Input Impedance: 1 mO

Channel EQ
EQ Configuration: Channels 1 and 2 have independent 2-band shelving EQs
High EQ Filter Type: 12 dB/octave shelving filter
High EQ Cutoff Frequency: 12 kHz
High EQ Gain/Attenuation: +/-15 dB
Low EQ Filter Type: 12 dB/octave shelving filter
Low EQ Cutoff Frequency: 80 Hz
Low EQ Gain/Attenuation: +/-15 dB

Aux Inputs
Connector: 1/8" (3.5 mm) TRS Input Connector
Frequency Response: 20 Hz - 20 kHz (+/- 0.1 dB)
Maximum Input Level: +12 dBu
Input Impedance: 20 kO

Line Output
Connector: 1/4" (6.35 mm) TRS Output Connector
Frequency Response: 20 Hz - 20 kHz (+/- 0.1 dB)
Output Level: Fixed +10 dBu
Input Impedance (unbalanced): 100 O

Amp/Drivers
Frequency Response: 60 Hz - 20 kHz
Max SPL: 110 dB
Power Amp: 100 W RMS mono-bridged
LF Driver: 8.0" 203 mm woofer
HF Drivers: (2) 1.0" / 25 mm tweeters
Side Drivers: (2) 3.0" / 76 mm drivers

Bluetooth Specifications
Profile: A2DP, AVRCP
Version: 5.0
Frequency: 2402 - 2480 MHz
Range: Up to 100 feet / 30.5 meters*

Battery
Type: lead-acid battery
Capacity: 12V, 7A, 84 Wh
Life: Up to 100 hours
Charging Time: 10 hours

USB-A Charging
Front USB Port: 5V, 1A
Top USB Port: 5V, 2.2A

Power
Connection: IEC
Voltage: 100-240 VAC, 50/60 Hz, 120 W

Dimensions (height x width x depth):
19.4" x 10.4" x 15.1" / 493 x 383.6 x 266.6 mm
Weight: 22.9 lbs. / 10.4 kg
Read more
 2 in stock $219.84
Click for better price!
or call +44 20 7424 1960
quote 1007442
Arturia MiniFuse Recording Pack (white) Arturia MiniFuse Recording Pack (white) Arturia MiniFuse Recording Pack (white) Arturia MiniFuse Recording Pack (white) Arturia MiniFuse Recording Pack (white) Arturia MiniFuse Recording Pack (white)
Arturia MiniFuse Recording Pack (white) (audio interface/microphone/shockmount/pop filter/studio headphones/XLR cable/music production softwares)
Cat: 955510 Rel: 19 Oct 23 • View all Audio- & MIDI-Interfaces
 
Recording pack: MiniFuse 2, CM1 cardioid microphone with shockmount and pop filter, EF1 closed-back monitoring headphones, XLR cable and 6 premium music-making software titles.
Notes: Record your voice, guitar, piano, synth, or any audio, and create great-sounding tracks with a plug-and-play bundle that does it all. For beginners, songwriters, content creators, and everyone in between, the MiniFuse Recording Pack gives you professional sound in a simple, fun, creative package - whatever your style.

Your recording all-in-one

Whether you're a beginner music maker, a content creator, a producer with limited space, or a musician on a budget, enjoy a pro-grade recording bundle for vocals, guitars, percussion, and more - without breaking the bank.

Plug-and-play interface

MiniFuse 2 gives you 2 audio inputs & outputs, MIDI for connecting synths & drum machines, and easy to use controls that work right out the box. Recording has never been so easy.

Make your voice heard

Capture your voice & instruments with supreme clarity without hassle. Follow the included step-by-step guide to connect your CM1 cardioid microphone and get recording - it even comes with a shockmount & pop filter to keep your recordings clean & noise-free.

Hear your sound come to life

Monitor your mix in studio-grade detail and comfortably smash out long sessions with the included EF1 closed-back monitoring headphones, great for production, live recording, and even just listening at home or on the move.

DAW music creation, your own way

Enjoy the most versatile & inspiring software bundle at this price point. From an introduction to an industry-standard DAW to a range of creative effects and audio enhancing tools, take your production to another level

Main Features

All-in-one audio interface recording bundle
Premium software bundle included
Analog Lab Intro with 500 vintage & modern keyboard presets
Rev PLATE-140 reverb
Pre 1973 vintage preamp
Delay TAPE-201 echo
Chorus JUN-6 analogue chorus
Ableton Live Lite

2 x combo Mic/Inst/Line XLR Input with 48V phantom power
2 x 1/4'' TRS balanced line outputs with volume control
1 x stereo headphones output with volume control
1 x 5-pin MIDI input & output
1 x USB2 type A hub (250mA max.)
1 x stereo virtual loopback channel
USB-C interface compatible with PC and Mac
Bus-powered

Microphone
Capsule: Condenser (Cardoid)
Sensitivity: -36 dB +3 dB (0 dB = 1 V/Pa at 1 kHz)
Frequency response: 20 Hz to 20kHz

Headphones
Type: Closed-back
Drive diameter: 40 mm

MiniFuse 2
2x Inputs
2x Outputs
1x Headphone
1x MIDI I/O

Subscriptions - Complimentary introductions to audio & mixing services:
Splice Creator Plan
Auto-Tune Unlimited

What's in the box

Box content:
MiniFuse 2 Unit
USB-A to USB-C cable
CM1 cardioid microphone with shockmount & pop filter
EF1 closed-back monitoring headphones with adapter
3m XLR cable

Platforms requirements

Windows
Win 10+ (64bit)
2.5 GHz CPU
4 GB RAM
2GB free hard disk space
OpenGL 2.0 compatible GPU

Apple
Mac OS 10.13+
2.5 GHz or Apple Silicon CPU
4 GB RAM
2GB free hard disk space
OpenGL 2.0 compatible GPU
Read more
MRP:$293.46 SAVE 12%
 1 in stock $258.74
Austrian Audio MiCreator System Studio Microphone Set (MiCreator Studio + MiCreator Satellite + MiCreator Y-Lav + Steinberg Cubase LE & WaveLab Cast)
Cat: 975479 Rel: 08 Dec 23 • View all Vocal Recording Microphones
 
Studio microphone set including MiCreator Studio, MiCreator Satellite, MiCreator Y-Lav, Steinberg Cubase LE & WaveLab Cast
Notes: The Austrian Audio MiCreator is a new type of creative tool. Equal parts high-quality condenser microphone and simple audio interface with USB-C r connectivity, MiCreator gives you the flexibility to create what you want-how you want. Just plug in and start recording in top-notch audio quality instantly. Or expand your setup using MiCreator's additional input to achieve stereo recordings, record an additional sound source, and more. And whether you're recording at home or on the go, you can create with confidence thanks to MiCreator's ultra-durable metal housing. So, whether you're looking for a capable plug-and-play microphone or a multifaceted production tool, MiCreator simplifies your creative process and delivers no-compromise results.

MiCreator System

Unleash your creativity

MiCreator Satellite

TRRS microphone with headphone jack
Custom Condenser Capsule - Record in top notch audio quality
Max SPL: 130 dB SPL - Record even very loud sources
FlexTilt mechanic - Easily position the mic head for optimal recording
Full metal housing - Longlasting and durable
Headphone jack
Exchangeable & customizable face plates for an individual and personalized look


MiCreator Y-Lav
Lavalier microphone with headphone jack
Pairs seamlessly with MiCreator Studio to unlock powerful creative flexibility
Connected via the Link Connection (In/Out jack on the MiCreator Studio)
Record high-quality audio for video projects and more
Connect a second pair of headphones via the built-in headphone jack

Cubase LE

free Steinberg software included

Cubase LE is the perfect introduction for aspiring music producers and composers. It's a powerful yet easy-to-use DAW that gives you everything you need to create professional music. With its intuitive interface and comprehensive features, Cubase LE is the perfect way to learn the basics of music production. Cubasis LE for iOS devices is unlocked when MiCreator Studio is connected to an iOS device.

WaveLab Cast

free Steinberg software included

WaveLab Cast is the ultimate audio production and podcast software for Mac and Windows. With its powerful features and intuitive user interface, WaveLab Cast makes it easy to create professional audio content. Whether you are an experienced podcaster or just starting out, WaveLab Cast has everything you need to create great sounding podcasts.

Technical Specifications
Digital Resolution: max 48kHz/24-Bit
Digital Connector: USB-C - USB Audio Class 1.0/2.0 compliant
Directional characteristic: Cardioid
Frequency range: 20 Hz - 20 kHz
Sensitivity:- 35dBFS/Pa (low gain)/-15dBFS(high gain)
Hardware Gain Switch: 0dB (low)/20dB (high)
Equivalent noise level: 22 dB SPL (A) (high gain)
Max SPL: 130 dB SPL (low gain)
Output Power: 45mW (32Ohm Load)
Dynamic Range: 89 dB(A)
In/Output TRRS: for instrument cable, 2nd headphone or MiCreator Satellite or Y-Lav
Dimensions: 155 x 60 x 37 mm
Weight: 370g
Read more
 1 in stock $292.40
Click for better price!
or call +44 20 7424 1960
quote 975479
Beetronics Nectar Tone Sweetener Overdrive & Fuzz Effects Pedal Beetronics Nectar Tone Sweetener Overdrive & Fuzz Effects Pedal
Cat: 978350 Rel: 06 Nov 23 • View all Effects pedals
 
Overdrive & fuzz effects pedal
Notes: The Nectar "Tone Sweetener" strikes aperfect balance between versatility and simplicity. It offers a wide range of tones, spanning from a vintage tweed-style crunch to a full-bodied overdrive, and even a modern high-gain fuzz that pairs wonderfully with any guitar, pedal or amp.

Use the mode toggle to switch between the DRIVE and FUZZZ modes, while the LEDS indicate the selected mode, even when the effect is bypassed. Fine-tune your sound with the TASTE control to set the perfect eq for each guitar or amp.

The Nectar's responsiveness is truly unparalleled, like a delicate bee collecting pollen. Every nuance of your playing is enhanced and sweetened in the best way possible, with plenty of headroom.

True Bypass Design
Power requirement: 9V, 30mA
Made in California, USA
Read more
MRP:$237.71 SAVE 14%
 3 in stock $203.79
Click for better price!
or call +44 20 7424 1960
quote 978350
Beyerdynamic DT700 Pro X Closed-Back Studio Headphones (48 Ohm) Beyerdynamic DT700 Pro X Closed-Back Studio Headphones (48 Ohm) Beyerdynamic DT700 Pro X Closed-Back Studio Headphones (48 Ohm) Beyerdynamic DT700 Pro X Closed-Back Studio Headphones (48 Ohm)
Cat: 977744 Rel: 23 Oct 23 • View all Studio-Kopfhörer
 
Closed-back studio headphones for recording & monitoring
Notes: 48-ohm version of the DT700 Pro X, part of Beyer's iconic DT series of studio headphones. Closed back design for mixing and monitoring, with a revealing, analytical sound.

Supplier's Notes:
Your studio headphones

DT 700 Pro X

Trusted sound meets performance and flexibility

In launching the closed-back DT 700 PRO X, Beyerdynamic are unveiling circumaural studio headphones, which are set to usher in a era for the long-established, Heilbronn-based company. While the classics of the PRO X series are regarded as reference products in professional studios all over the world, the PRO line is suitable for flexible use both in the studio and while on the move. It is all made possible by the STELLAR.45 driver that loudly reproduces the best sound in studio quality without any distortion - with all playback devices.

Professional audio quality

Trusted studio sound meets high performance

The STELLAR.45 sound transducer, developed and produced in Heilbronn, Germany, delivers that proven Beyerdynamic sound at previously unattained levels of studio-headphones-class performance. This is down to the neodymium ring magnet as well as copper-clad high-tech wire. The trade-off between electrical conductivity and the weight of the wire is unique. In combination with the developed three-layer speaker diaphragm featuring integrated damping layer, this has created a highly efficient driver system that performs superbly on all playback devices.

The innovative membrane structure controls the axial motion of the voice coil and ensures that it remains securely positioned in the magnet gap even during high oscillations. Another benefit is vast and natural frequency response. The fast response of the transducer and the detailed transient response, produced by the low coil weight, create a sound that is always reliable and distortion free even at high sound pressure levels.

Flexibility

Wide range of applications on all playback devices

Anytime, anywhere - the wide range of applications offered by the PRO X line unleashes your creativity. Be it on an audio interface, laptop, tablet or mobile phone: Thanks to Beyerdynamic's high-performance STELLAR.45 driver, the PRO X headphones with an impedance of 48 ohms reproduce sound at volume and power to familiar levels of studio quality - on all playback devices. The cable concept is also demonstrably suitable for everyday use: the removable mini-XLR cable can be swapped out as required to be replaced with cables that have different lengths or feature other connectivity options.

Superb wearing comfort

Tailored fit for extra-long sessions

The PRO X line also embodies what these professional headphones have always been synonymous with: maximum wearing comfort. The robust spring steel headband design assures the over-ear headphones provide a secure fit and ensures durability. The supple velour ear pads are soft to the touch, as you would expect, and guarantee superior ventilation. The headband ergonomically adapts to the shape of the wearer's head with the aid of soft memory foam and, like the ear pads, can be replaced if required.

Design & materials

Built to last, featuring a sleek, robust design

Black, minimalist and reduced to the essentials. In a word: PRO. As far as the design of and materials used in the PRO X line are concerned, attention was paid to the resilience of all components: metal headband, GRP components, a robust mini-XLR connector and hard-wearing cable. This means you are geared up on a daily basis for any professional application.

Sustainability

Sustainable headphones - made in Germany

The PRO X line headphones have been designed for daily use in challenging conditions. This is why they are handmade in Germany using premium quality materials. If required, nearly all the headphones' components can be replaced, turning these headphones into an investment that makes sense for every creator.

Technical data

Transmission type: Wired
Earpad material: Velours
Nominal impedance headphones: 48 ohms
Weight headphones without cable: 350 g
Headphone frequency response: 5 - 40,000 Hz
Nominal sound pressure level: 100 dB SPL (1mW/500Hz)
Sound coupling to the ear: Circumaural (around the ear)
Cable & plug: 3 m or 1.8 m straight cable, detachable, with 3-pin mini XLR & stereo jack (3.5 mm & 6.35 adapter)
Read more
 1 in stock $210.75
The Southern Harmony & Musical Companion (Super Deluxe Edition)
The Southern Harmony & Musical Companion (Super Deluxe Edition) (limited 4xLP box set + hymn book + lithographs)
Cat: 583497 8. Rel: 20 Dec 23
 
Rock
Sting Me (LP1: The Southern Harmony & musical Companion)
Remedy
Thorn In My Prickle
Bad Luck Blue Eyes Goodbye
Sometimes Salvation
Hotel Illness
Black Moon Creeping
No Speak No Slave
My Morning Song
Time Will Tell
99 Pounds (LP2: More Harmony: unreleased outtakes & B-sides)
Miserable
Rainy Day Women #12&35
Boomer's Story
Darling Of The Underground Press
Sting Me (Slow)
Bad Luck Blue Eyes Goodbye
Sometimes Salvation
Black Moon Creeping
No Speak No Slave (LP3: Southern Harmony live Houston, TX, Febuary 6, 1993)
Sting Me
My Morning Song
Jam
Thorn In My Pride
Bad Luck Blue Eyes Goodbye
Black Me Creeping
Hotel Illness
Sometimes Salvation
Remedy
Review: American blues-slanted rock band the Black Crowes put out their second album The Southern Harmony and Musical Companion back in May 1992. It was the first time Marc Ford had featured on lead guitar in place of Jeff Cease who was sacked the year before. It also marked the first time Eddie Harsch joined on keys and set a record at the time for being the first album to feature four rock number ones, and the album itself also climbed to the top spot in the Billboard 200 album chart. Its mix of blues and Southern styles often sees the album being included in lists of the best rock albums of all time.
Read more
 in stock $231.40
Black Lion Audio PBR TRS3 3-Way 96-Point Audio Patchbay Black Lion Audio PBR TRS3 3-Way 96-Point Audio Patchbay Black Lion Audio PBR TRS3 3-Way 96-Point Audio Patchbay Black Lion Audio PBR TRS3 3-Way 96-Point Audio Patchbay Black Lion Audio PBR TRS3 3-Way 96-Point Audio Patchbay
Notes: Studio grade connectivity.

Your studio needs more than just accessible patching - exceptional audio quality through the entire signal path is crucial! Black Lion has been improving already-great gear through their modification service for years, and all that know-how has been channelled straight into the PBR TRS3.

The PBR TRS3 is a 48-point TRS patchbay, suitable for the most robust routing imaginable in a single rack space, loaded with 96 audiophile-grade gold-plated 1/4" TRS connectors for maximum conductivity and signal clarity. You'll easily interconnect your preamps and other outboard hardware via its audiophile-grade, secure connections.

Limitless flexibility and road-worthy construction

You'll reconfigure your entire studio's routing at a moment's notice (while cutting down on cable clutter! The rear-mounted 3-way mode switches allow for Normal, Half-normal, and Thru operation, delivering unlimited routing potential for mults, bypassing, monitoring, and parallel processing.

Black Lion's team of engineers have worked tirelessly to ensure that the PBR TRS3 delivers proper quality through-and-through. The PBR TRS3 is also built Black Lion-tough, with a reinforced steel chassis and black-anodized aluminium faceplates that make for a matched and sophisticated look.

Not your average patchbays.

Configure your studio with the best: Black Lion Audio PBR Series Patchbays. Your recordings deserve the best, and maintaining a great signal path is crucial!

Features

96 audiophile-grade gold-plated 1/4" TRS connectors
Rear-mounted 3-way mode switches for Normal, Half-normal, and Thru operation
Black-anodized aluminium faceplate and reinforced steel chassis
Includes front panel labels
Exceptional value for the price

Specifications

Number of Points: 96
Front Connectors: 48x XLR
Rear Connectors: 48x TRS
Dimensions: 534 x 102 x 51mm, 1.4kg (boxed)
Read more
 1 in stock $261.91
Click for better price!
or call +44 20 7424 1960
quote 995329
Hand Of Doom 1970-1978 (Super Deluxe Edition)
Hand Of Doom 1970-1978 (Super Deluxe Edition) (limited numbered picture disc 8xLP box set + poster)
Cat: 405053 8971200. Rel: 12 Dec 23
 
Metal
LP1: Black Sabbath (1970)
LP2: Paranoid (1970)
LP3: Master Of Reality (1971)
LP4: Vol 4 (1972)
LP5: Sabbath Bloody Sabbath (1973)
LP6: Sabotage (1975)
LP7: Technical Ecstasy (1976)
LP8: Never Say Die! (1978)
Review: The Black Sabbath Hand Of Doom box set provides the ultimate collection for fans who opt to live in a world where the group never had any other vocalist apart from Ozzy Osbourne. Providing picture disc represses of all eight LPs released during the original frontman's tenure from 1970 to 1978 (2013's reunion album 13 is not included), the collection boasts the self-titled 1970 debut, the same-year follow up Paranoid, as well as the iconic slew of Master Of Reality (1971), Vol 4 (1972), Sabbath Bloody Sabbath (1973), Sabotage (1975), Technical Ecstasy (1976) and Never Say Die! (1978). Limited to 3000 copies (which isn't a large amount when considering how vital Sabbath's early material still is to this day) and complete with a large coloured poster, fan service rarely gets as ideal or essential as Hand Of Doom.
Read more
 in stock $230.34
Boss Cube Street 2 10W Battery-Powered Stereo Amplifier Boss Cube Street 2 10W Battery-Powered Stereo Amplifier Boss Cube Street 2 10W Battery-Powered Stereo Amplifier
Cat: 1000185 Rel: 14 Feb 24 • View all Guitar Amps | Electric Guitar Amplifiers
 
10W battery-powered stereo amplifier
Notes: Be Heard Anywhere

Wherever you perform, high-quality sound with great projection is essential to capture listeners and stand out from the pack. With the portable CUBE Street II by your side, you have the tools you need to deliver your message with confidence in any mobile setting, from musical performances on the street to public speaking events.

Evolved from the best-selling Roland CUBE Street-and newly rebranded with the BOSS name-this battery-driven powerhouse provides rich stereo sound for busking and other mobile gigs. Dual channels allow you to plug in mics and instruments and sound great immediately, with no extra gear to carry around. A vocal harmony function, looper, and effects are also on hand to lift your performances and impress the crowd. And with the optional Bluetoothr Audio MIDI Dual Adaptor (BT-DUAL), you can wirelessly stream backing tracks and control CUBE Street II functions from your phone or tablet.

Travel Light with Powerful Sound

Compared with its popular predecessor, CUBE Street II is even lighter and more durable thanks to its modern ABS injection-moulded design. The output power has been doubled too, giving you 10 total watts of crisp and clean stereo sound to cut through street traffic, train arrivals, and other noise challenges on the gig. In quieter situations where you don't need as much headroom, kicking in Eco mode reduces the power to extend battery life.

All the Connectivity You Need

With two ultra-versatile input channels, CUBE Street II supports all types of musicians and performers. The Mic/Instrument channel features a combo jack for either an XLR balanced mic or an instrument such as a keyboard or Roland's Aerophone. Equipped with a standard 14-inch jack, the Guitar/Mic channel provides plug-and-play sound for guitarists with seven acoustic and electric amp types, as well as settings for a line-level instrument or unbalanced mic. And if you ever need to expand your sonic reach, dedicated outputs are available for connecting to a house PA or another CUBE Street II.

Make Your Performances Shine

CUBE Street II is packed with features to enhance your sound and bring fresh energy to shows. Each channel provides dedicated three-band EQ and reverb, and there's a chorus/delay effect on the Guitar/Mic channel. The harmony function on the Mic/Instrument channel creates impressive vocal harmonies that will make audiences wonder where the background singers are hiding. Harmonies are produced as you sing based on the guitar chords you play or a key you set, and you can bring them in and out as needed with an optional footswitch. There's a built-in looper too, providing a powerful and fun way to create backing tracks on the spot.

From the Street to the World

CUBE Street II helps you reach both in-person and global audiences at the same time. Via i-CUBE Link and USB, you can send the amp's audio output to video, livestreaming, or music production apps for on-the-spot capture. The i-CUBE Link jack provides a mono output and connects to most phones and tablets with the included cable, while USB supports a stereo digital connection to a computer or an iOS device.*

*An Apple adaptor may be required to connect an iOS device to the CUBE Street II via i-CUBE Link or USB.

A Grab-and-Go PA for Everyone

While designed with performing musicians in mind, CUBE Street II excels in any situation that requires high-quality sound. It's easy to move and sets up anywhere, making it perfect for speaking in presentations, workshops, and school events. And with the ability to play music as well-either wired through the aux input or wirelessly with the optional Bluetoothr Audio MIDI Dual Adaptor (BT-DUAL) -CUBE Street II is ideal for background entertainment and impromptu karaoke performances.

Specifications

Rated Power Output: 10 W (5 W + 5 W)
Nominal Input Level: MIC/INSTRUMENT INPUT: -40 dBu (2 k ohm)/-20 dBu (11 k ohm), GUITAR/MIC INPUT:-10 dBu(1 M ohm), i-CUBE LINK/AUX IN: -20 dBu (15 k ohm)
Nominal Output Level: LINE OUT : -10 dBu (MONO)
Speakers: 16 cm (6.5 inches) x 2

Controls: POWER switch, OUTPUT POWER switch (MAX, ECO), LOOPER button, STOP button

[MIC/INSTRUMENT]: SELECT switch (MIC, INST), VOLUME knob, HARMONY knob, KEY button, BASS knob, MIDDLE knob, TREBLE knob, REVERB knob

[TUNER]: TUNER button

[GUITAR/MIC]: AMP TYPE knob (NORMAL, BRIGHT, WIDE, INSTRUMENT, CLEAN, CRUNCH, LEAD, ACOUSTIC SIM, MIC), GAIN knob, VOLUME knob, BASS knob, MIDDLE knob, TREBLE knob, CHORUS/DELAY knob (CHORUS, DELAY) REVERB knob, [i-CUBE LINK/AUX IN], i-CUBE LINK/AUX IN knob

Indicators: POWER, TUNER, KEY, REC, PLAY

Connectors

[INPUT]: MIC/INSTRUMENT jack: Combo type (XLR type, 1/4-inch TRS phone type), balanced; GUITAR/MIC jack: 1/4-inch phone type; i-CUBE LINK/AUX IN jack: 4-pole miniature phone type

[OUTPUT] LINE OUT jack: 1/4-inch phone type; PHONES/REC OUT jack: Stereo miniature phone type

[FOOT SW]: SW 1 HARMONY/MIC/INST jack: 1/4-inch TRS phone type, SW 2 LOOPER/GUITAR/MIC jack: 1/4-inch TRS phone type

Bluetooth ADAPTOR connector: Dedicated connector
USB port: USB B type
DC IN jack

Power Supply
AC adaptor (DC 9 V)
Alkaline battery (AA, LR6) x 8
Rechargeable Ni-MH battery (AA, HR6) x 8

Current Draw: 390 mA

Expected battery life under continuous use:

[OUTPUT POWER switch: MAX (Maximum power output: 10 W)]
Alkaline battery: Approximately 8 hours
Rechargeable Ni-MH battery: Approximately 10 hours (*1)

[OUTPUT POWER switch: ECO (Maximum power output: 5 W)]
Alkaline battery: Approximately 11 hours
Rechargeable Ni-MH battery: Approximately 14 hours (*1)

*1 When using batteries having a capacity of 2,500 mAh.
* These can vary depending on the specifications of the batteries, capacity of the batteries, and the conditions of use.

Accessories: Owner's Manual, Leaflet USING THE UNIT SAFELY, AC adaptor, Power cord, Mini cable (4-pole miniature phone type)

Options (sold separately):
Bluetoothr Audio MIDI Dual Adaptor: BT-DUAL
Carrying case: CB-CS1
Footswitch: FS-5U, FS-6, FS-7

Size & weight

Width: 414 mm / 16-5/16 inches
Depth: 285 mm / 11-1/4 inches
Height: 255 mm / 10-1/16 inches
Weight (excluding AC adaptor): 4.4 kg / 9 lbs 12 oz

Read more
MRP:$361.83 SAVE 21%
 1 in stock $285.04
Boss DCB-LX 10W Bass Amplifier Boss DCB-LX 10W Bass Amplifier Boss DCB-LX 10W Bass Amplifier Boss DCB-LX 10W Bass Amplifier
Cat: 997475 Rel: 15 Feb 24 • View all Bass Amps | Bass Guitar Amplifiers
 
10W bass amplifier
Notes: The Ultimate CUBE Bass Experience for Home and Beyond

For over four decades, CUBE amplifiers have brought exceptional value to musicians everywhere, offering great sound and versatile features in portable, go-everywhere designs. The DUAL CUBE BASS LX is the most advanced compact CUBE bass amp yet, filled with evolved BOSS technologies for the ultimate home practice experience. This thunder box punches well above its size, delivering rich, full sound and a host of fun rhythm patterns to groove with. A generous array of connectivity options are also included, extending its range to performing, recording, and many other applications.

Stage Sound at Home

With its custom stereo speaker system and advanced cabinet design, the DUAL CUBE BASS LX delivers big, refined tones that you won't believe are coming from such a small amp. Five different preamp types are available, offering uncoloured sounds for studio and slap playing, vintage sounds for classic styles, and aggressive modern tones for heavy genres. With natural feel and organic response honed with decades of BOSS amp development, you have an endlessly inspiring platform to hone skills and explore new techniques.

Find Your Voice

The DUAL CUBE BASS LX features a variety of bass-tuned effects, including many with expansive stereo sound. Shape your core tone with compression or drive, add colour with touch wah, flanger, or chorus, and bring in spatial depth with delay or reverb. Each amp type includes three user memories, allowing you to store gain, EQ, and effect setups for quick recall. The DUAL CUBE BASS LX Editor lets you dive even deeper, providing access to effect variations and detailed parameter tweaks from your Mac or Windows computer.

Get in the Groove

Make your practice sessions more fun and productive with the powerful onboard Rhythm Guide. There are nine rhythm types with three pattern variations each, spanning from a basic metronome to realistic drum grooves in rock, jazz, metal, Latin, and other styles. Using the DUAL CUBE BASS LX Editor, you can explore a total of 91 rhythm variations and save your favorites in the amp. With the high-performance stereo speakers, rhythms and backing music are presented in full-range detail for a rich, immersive experience.

Beyond the Bedroom

Thanks to its ultra-flexible connectivity, the DUAL CUBE BASS LX goes far beyond the capabilities of other compact amps. Use the stereo XLR line output to directly connect to a PA system and perform on stage. Or capture mix-ready sounds in music software on a computer or mobile device via USB or i-CUBE-Link. If you like to livestream, you can capture your voice with a headphones mic and send it to the USB and i-CUBE Link outputs along with your bass sound. And with the ability to use AC or battery power, you can play absolutely anywhere.

Expand Your Possibilities

With optional FS-series footswitches, you can operate the Rhythm Guide hands free and unlock access to the onboard looper to create layered performances. And by connecting the optional Bluetoothr Audio MIDI Dual Adaptor, you can go even further with a smartphone or tablet. Wirelessly stream music from your device and jam along, or use the iOS/Android version of the DUAL CUBE BASS LX Editor to tweak functions remotely. Or pair the EV-1-WL Wireless MIDI Expression Pedal for cable-free operation of wah and volume.

Standard Features
Ultra-portable stereo bass amplifier with professional sound and features
Two custom-designed 5-inch speakers
10-watt stereo power amp (5 watts x 2)
Five preamp types: Super Flat, Flat, Vintage, Modern, and Rock
Compressor/drive control tuned for bass
Chorus, flanger, touch wah, delay, and reverb effects
Three-band equalizer
Store amp and effects settings in 15 memories (3 memories for each amp type)
Powered via AC adaptor (included) or eight AA batteries
Onboard rhythms with 27 different patterns (nine types and three variations each)
Edit sounds, access additional rhythm variations, and more with the dedicated DUAL CUBE BASS LX Editor
Stereo XLR balanced line output
Phones/Rec jack with support for an inline headphones microphone
USB audio for direct recording and livestreaming
Control jack for up to two external footswitches
i-CUBE Link/Aux In jack for audio playback
Selectable Loopback function for USB and i-CUBE Link/Aux In
Onboard looper (requires optional footswitch)
Connector for optional Bluetoothr Audio MIDI Dual Adaptor (BT-DUAL)


Specifications

Rated Power Output: 10 W (5 W+5 W)
Nominal Input Level: INPUT: -10 dBu (1 M ohm), i-CUBE LINK/AUX IN: -20 dBu (15 k ohm)
Nominal Output Level: LINE OUT L, R: -10 dBu
Speakers: 12 cm (5 inches) x 2
Controls: POWER switch, COMP/DRIVE knob, DRIVE button, AMP TYPE knob (SUPER FLAT, FLAT, VINTAGE, MODERN, ROCK), MEMORY button, GAIN knob, VOLUME knob, BASS knob, MIDDLE knob TREBLE knob, EFFECTS knob (CHORUS, FLANGER, T-WAH), DELAY/REVERB knob, START/STOP button, PATTERN knob (METRONOME, JAZZ, ROCK, BLUES, R&B, FUNK, METAL, LATIN, COUNTRY), VARIATION button, TAP TEMPO button, VOLUME knob (RHYTHM GUIDE), MIC VOL knob, MASTER knob, LOOPBACK switch (i-CUBE LINK/AUX IN), LOOPBACK switch (USB)
Indicators: POWER, DRIVE, MEMORY, START/STOP, VARIATION, REC, PLAY, DUB

Connectors:
INPUT jack: 1/4-inch phone type
PHONES/REC OUT jack: Stereo Miniature phone type (Stereo, CTIA)
i-CUBE LINK/AUX IN jack: Stereo Miniature phone type (Stereo, CTIA)
LINE OUT L, R connectors: XLR type
FOOT SW jack: 1/4-inch TRS phone type
Bluetooth ADAPTOR connector: Dedicated connector
USB port: USB B
DC IN jack
Power Supply: AC adapter (DC 9 V), Alkaline battery (AA, LR6) x 8, Rechargeable Ni-MH battery (AA, HR6) x 8Current Draw370 mA
Expected battery life under continuous use: Alkaline battery: Approximately 8 hours
Rechargeable Ni-MH battery: Approximately 10 hours (*1)

*1 When using batteries having a capacity of 2,500 mAh.
* These can vary depending on the specifications of the batteries, capacity of the batteries, and the conditions of use.

Accessories: Owner's Manual, Leaflet USING THE UNIT SAFELY, AC adapter, Power cord, Mini cable (4-pole miniature phone type)

Options (sold separately):
Footswitch: FS-5U, FS-6, FS-7
Bluetoothr Audio MIDI Dual Adaptor (MODEL BT-DUAL)
Wireless MIDI Expression Pedal: EV-1-WL

Size & weight
Width: 341 mm / 13-7/16 inches
Depth: 205 mm / 8-1/8 inches
Height: 261 mm / 10-5/16 inches
Weight (excluding AC adaptor): 4.4 kg / 9 lbs 12 oz
Read more
MRP:$327.12 SAVE 14%
 1 in stock $279.79
Boss DD-200 Digital Delay Effects Pedal Boss DD-200 Digital Delay Effects Pedal Boss DD-200 Digital Delay Effects Pedal Boss DD-200 Digital Delay Effects Pedal
Cat: 996860 Rel: 19 Mar 24 • View all Effects pedals
 
Digital delay effects pedal
Notes: Simply sophisticated

With the 200 series, BOSS introduces a new generation of pedals that pack advanced sound and versatility into a streamlined size that saves space on your board. Grab-and-go controls and multi-function switches make operation easy and intuitive, while onboard memories allow you to store multiple setups for instant recall. All 200 series pedals feature premium audio quality with 32-bit internal processing and offer support for external control via footswitches, an expression pedal, or MIDI.

The DD-200 Digital Delay brings together sounds and features inherited from the flagship DD-500 into an even smaller footprint. Twelve different modes offer an inspiring variety of delay colours from modern digital to classic analogue, letting you dial up everything from basic echoes to rich ambient pads and everything in-between. There's also a looper that's always ready to use, plus a selectable carryover function for seamless transitions between memories.

Version 1.1 Update: User Memory Expansion

The free Version 1.1 software update brings increased flexibility to the BOSS 200 series, greatly expanding the onboard memory capacity for storing and recalling sounds. There are now 128 user setups available. Setups can also be recalled directly via MIDI program change.

For optimal performance, stay up to date with the current DD-200 system software

Twelve Modes, Unlimited Sounds

With 12 different modes to choose from, the DD-200 provides nearly any flavour of delay in an amazingly compact size. At your command are super-clean digital delays, gritty analogue echoes, and spot-on retro sounds from the Roland RE-201 Space Echo and Binson Echorec 2. There's also a variety of options for creating reverse effects, lo-fi tones, and pulsing rhythmic sounds with layered delays. And with the Tera Echo, Shimmer, and Pad Echo modes, immersive ambient colours are just a knob twist away.

Dial in Sounds Fast

The DD-200 features a no-nonsense interface, making it easy to craft inspiring sounds in the heat of the moment. Essential delay parameters are provided on dedicated controls for direct, hands-on access. And in each mode, the function of the PARAM knob changes to parameters tailored for the selected type, delivering extended control with no need to menu dive.

Save and Recall Your Favourite Setups

The DD-200 features 127 user memories plus a real-time panel setting, giving you 128 total setups to choose from. Any range of consecutive memories and the panel setting can be assigned for scrolling access from a footswitch. It's also possible to limit the scrolling range or assign memories directly for even faster recall. If you crave deeper control, setups can be directly recalled via program change messages from an external MIDI device. And by enabling the carryover function, delay repeats will keep sounding as you change memories for smooth, free-flowing transitions.

Deep Real-Time Control

By default, the DD-200's multi-function footswitches provide access to basic functions like bypass, memory scrolling, tap tempo, and looper control. But you can easily reassign them to hold, warp, and many other functions. External control is also possible via footswitches or an expression pedal, and MIDI I/O is even provided on space-saving mini TRS jacks. Via MIDI, you're able to chain multiple 200 series pedals and select memories on all of them at once, and also control a wide range of functions from MIDI devices like the ES-8 and ES-5 effects switchers.

Ready-to-Go Looper

Any time you're ready, pressing the DD-200's two footswitches together puts you into looper mode. Up to 60 seconds of mono recording time is available, and operation is simple and direct with the onboard switches. And since the looper engine functions independently, you're able to develop expressive loops with any of the DD-200's rich delay sounds.

DD-200 Delay Modes

Standard-Clear digital delay. PARAM adjusts the delay attack.
Analog-Emulates classic analogue "BBD" delays like the BOSS DM series. PARAM controls character and distortion amount.
Tape-Emulates the warm tape-based sound of the legendary Roland RE-201 Space Echo. PARAM selects different combinations of three playback heads, and also adjusts the amount of distortion in the delay sound.
Drum-Models the drum-based Binson Echorec 2. PARAM selects different combinations of four playback heads, and also adjusts the amount of distortion in the delay sound.
Shimmer-Pitch-shifted delay for lush, heavenly textures. PARAM adjusts the delay brightness.
Tera Echo-Spacious, animated ambience effect derived from the BOSS TE-2 pedal. PARAM adjusts the sound character.
Pad Echo-Newly developed delay sound for creating drifting ambient textures. PARAM adjusts the delay attack.
Pattern-Rhythmic sounds with 16 delay lines layered together. PARAM selects different pattern variations.
Lo-Fi-Delay sound with fat, distorted character. PARAM adjusts the distortion effect.
Dual-Two different delay lines connected in series. PARAM adjusts the time of the second delay.
Reverse-Backwards delay for cool psychedelic effects and other unique tones. PARAM adjusts the delay attack.
Ducking-Delay with a built-in ducking effect. PARAM adjusts the input sensitivity.

*The product names mentioned on this page are registered trademarks or trademarks of their respective owners. These names are used because it is the most practical way of describing the sounds that are simulated.

Specifications

Sampling Frequency: 96 kHz
AD/DA Conversion: 32 bits
Processing: 32-bit floating point

Modes: 12 modes
STANDARD, ANALOG, TAPE, DRUM, SHIMMER, TERA ECHO, PAD ECHO, PATTERN, LO-FI, DUAL, DUCKING, REVERSE

Memory127 + Manual
Nominal Input Level: INPUT A/MONO, B: -10 dBu
Maximum Input Level: INPUT A/MONO, B: +7 dBu
Input Impedance: INPUT A/MONO, B: 2 M ohm
Nominal Output Level: OUTPUT A/MONO, B: -10 dBu
Maximum Output Level: OUTPUT A/MONO, B: +7 dBu
Output Impedance: OUTPUT A/MONO, B: 1 k ohms
Recommended Load Impedance: OUTPUT A/MONO, B: 10 k ohms or greater
Bypass: Buffered bypass

Controls:
ON/OFF switch, MEMORY/TAP switch
MODE knob, TIME knob, FEEDBACK knob, E. LEVEL Knob, PARAM knob, TONE knob, MOD DEPTH knob
TAP DIVISION button, MEMORY button

Display: 7 segments, 3 characters (LED)
Indicator: TAP DIVISION indicator, MEMORY (MAN, 1--4) indicators

Connectors:
INPUT (A/MONO, B) jacks, OUTPUT (A/MONO, B) jacks: 1/4-inch phone type
CTL 1, 2/EXP jack: 1/4-inch TRS phone type
MIDI (IN, OUT) jacks: Stereo miniature phone type
DC IN jack
USB port: USB micro B-type (program update only)

Power Supply: Alkaline battery (AA, LR6) x 3, AC adaptor (sold separately)
Current Draw: 225 mA

Expected Battery Life Under Continuous Use
Alkaline: Approx. 4 Hours
* These figures will vary depending on the actual conditions of use.

Accessories: Leaflet "USING THE UNIT SAFELY", Leaflet "To obtain the Owner's Manual", Alkaline battery (AA, LR6) x 3, Rubber foot x 4

Options (sold separately):
AC adaptor: PSA-S series
Footswitch: FS-5U
Dual footswitch: FS-6, FS-7
Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5
MIDI/TRS connecting cable: BMIDI-5-35, BMIDI-1-35, BMIDI-2-35, BCC-1-3535, BCC-2-3535

Size & weight

Width: 101 mm / 4 inches
Depth: 138 mm / 5-7/16 inches
Height: 63 mm / 2-1/2 inches
Height (including rubber foot): 65 mm / 2-9/16 inches
Weight: 610 g / 1 lb 6 oz
Weight (including battery): 680 g / 1 lb 8 oz

0 dBu = 0.775 Vrms
Read more
 1 in stock $239.81
Click for better price!
or call +44 20 7424 1960
quote 996860
Boss GT-1 Multi-Effects Processor Pedal Boss GT-1 Multi-Effects Processor Pedal Boss GT-1 Multi-Effects Processor Pedal
Cat: 997467 Rel: 15 Feb 24 • View all Effects pedals
 
Multi-effects processor pedal
Notes: Premium tone for players on the go

Ultra-portable and easy to use, the GT-1 delivers pro-level tones everywhere you play. Driven by the powerful BOSS GT-series engine, it gives you access to a huge selection of world-class amps and effects for all types of music. A streamlined interface enables quick and intuitive sound creation, while an assignable control switch and expression pedal provide dynamic real-time effects adjustment. And by connecting to BOSS TONE CENTRAL, you can download free pro patches, editing software, and more. Equally suited for beginners, weekend warriors, and traveling players, the GT-1 packs premium sound in a compact and rugged package.

Exceptional Sound

Thanks to its Premium BOSS sound engine, the GT-1 provides tone quality and sound-shaping ability that far exceeds typical compact multi-effects. A history of BOSS processing is at your fingers, from classics such as the OD-1 Overdrive to modern effects powered by innovative MDP technology. There's a huge selection of COSM amp tones on tap too, including vintage legends and BOSS original amps optimized for ideal tone and response. Specialized effects like Acoustic Simulator, Guitar Simulator, and others provide numerous tonal options, and there's even a looper to enhance your practice sessions and stage performances.

Portable Tone Partner

The GT-1 was designed for musicians on the move. It's surprisingly lightweight and compact, yet still delivers the rugged durability that BOSS is famous for. The modern design is easy to slip in and out of a guitar bag's accessory compartment, with no worries of hard edges causing damage to your axe. AC or battery power provides flexibility for any performing situation, and up to seven hours of battery life is available for street performing and other mobile gigs.

Easy Patch Selection and Sound Creation

With the GT-1, it's simple to find fantastic tones for your style, and just as simple to customize them to taste. Beginners can get great sounds right away, while more experienced players will appreciate how quick and intuitive it is to adjust sounds. The Easy Select function allows you to choose patches by genre, distortion, or effect type, while Easy Edit lets you tweak drive, modulation, and echo tones to perfection with little effort. Dedicated panel buttons provide quick on/off switches for effect groups, and also unlock deep-dive parameters for microscopic fine-tuning.

BOSS Tone Central and BOSS Tone Studio

At BOSS Tone Central, you'll find tons of free patch collections for playing all types of music with the GT-1. Created by pro guitarists, these patches are dialled-in and ready to use, and make great starting points for advanced players who like to create their own custom sounds. The free BOSS Tone Studio software provides a full-featured editor/librarian for the GT-1, as well as integrated access to all the patch collections at BOSS Tone Central.

Maximum Control in a Small Space

The GT-1's three footswitches are smartly designed to provide patch selection, tuner access, looper control, and more in a minimal footprint. The dedicated CTL1 switch is freely assignable to functions like tap tempo, effects on/off, and numerous others, while the expression pedal and toe switch are assignable to volume, wah, and various effects parameters. If you crave more control, there's even a jack for connecting up to two external footswitches or an expression pedal. And in addition to providing access to BOSS Tone Central and BOSS Tone Studio, the GT-1's USB jack lets you record tones with your favourite DAW.

Specifications

Sampling Frequency: 44.1 kHz
AD Conversion: 24 bits + AF method
* AF method (Adaptive Focus method) is a proprietary method from Roland & BOSS that vastly improves the signal-to-noise (SN) ratio of the AD and DA converters.
DA Conversion: 24 bits
Effects: 108 types
Patches: 99 (User) + 99 (Preset)
Phrase Loop: 32 sec
Nominal Input Level: INPUT: -10 dBu, AUX IN: -20 dBu
Maximum Input LevelINPUT: +7 dBu, AUX IN: 0 dBu
Input Impedance: INPUT: 1 M ohm, AUX IN: 27 k ohms
Nominal Output LevelOUTPUT (L/MONO, R): -10 dBu, PHONES: -10 dBu
Output Impedance: OUTPUT (L/MONO, R): 1 k ohm, PHONES: 44 ohms
Recommended Load Impedance: OUTPUT (L/MONO, R): 10 k ohms or greater, PHONES: 44 ohms or greater
Controls: DOWN switch, UP switch CTL1 switch, EASY SELECT button, EASY EDIT button, FX1/COMP button, OD/DS button, PREAMP button, FX2/MOD button, DELAY button, REVERB button, MEMORY EDIT button, EXIT button

Display: Graphic LCD (132 x 32 dots, backlit LCD)
Connectors: INPUT jack, OUTPUT (L/MONO, R) jacks: 1/4-inch phone type, CTL2, 3/EXP2 jack: 1/4-inch TRS phone type, AUX IN jack: Stereo miniature phone type, PHONES jack: Stereo miniature phone type, USB COMPUTER port: USB type B, DC IN jack
Power Supply: Alkaline battery (AA, LR6) x 4, AC adaptor (sold separately)
Current Draw: 200 mA

Expected battery life under continuous use:
Alkaline: Approx. 7 hours
* These figures will vary depending on the actual conditions of use.
Accessories: Owner's manual, Leaflet "USING THE UNIT SAFELY", Alkaline battery (AA, LR6) x 4

Options (sold separately):
AC adaptor: PSA series
Footswitch: FS-5U, FS-5L, FS-6, FS-7
Expression Pedal: FV-500L, FV-500H, Roland EV-5

Size & weight

Width: 305 mm / 12-1/16 inches
Depth: 152 mm / 6 inches
Height: 56 mm / 2-1/4 inches
Maximum height: 74 mm
2-15/16 inches
Weight (including battery): 1.3 kg / 2 lbs 14 oz
Read more
MRP:$247.18 SAVE 18%
 1 in stock $201.95
Boss Katana-50 MKII 50W Guitar Amplifier Boss Katana-50 MKII 50W Guitar Amplifier Boss Katana-50 MKII 50W Guitar Amplifier Boss Katana-50 MKII 50W Guitar Amplifier Boss Katana-50 MKII 50W Guitar Amplifier
 
50W guitar amplifier
Notes: Katana MkII takes the acclaimed Katana guitar amp series to the next level, turbocharging the core platform with more sounds, more effects, and more features. Newly voiced variations are now available for all five amp characters, doubling the tonal options. And the onboard effects categories have been expanded from three to five, providing even more real-time processing to choose from. The usability has been ramped up too, with a power amp input for modelers and multi-FX, updated editor software, and many other enhancements.

More Sounds, More Versatility

The stage-class Katana MkII lineup picks up where the first generation left off, building on the same core tones and features that have made the series such a worldwide smash. If you loved the original Katana amps, you'll love Katana MkII even more. And if you're new to the party, get ready for sound, feel, and versatility that soars far beyond its price class.

Five Amp Characters, Ten Overall Tones
Katana MkII's five primary amp characters offer everything from organic vintage tones to modern high-gain sounds, plus a dedicated voice optimized for acoustic-electric guitar. The characters have now been extended with newly voiced variations, providing a wider palette of tone options to craft your personal sound.

Five Effects At Once

Katana MkII now includes five simultaneous effects categories, putting the tone-shaping power of a massive pedalboard right inside your amp. Independent Booster, Mod, FX, Delay, and Reverb sections come loaded from the factory with three variations in each, providing 15 ready-to-play effects to choose from. Connecting to BOSS Tone Studio lets you dive much deeper if you want-customize the sections with over 60 different effect types, change the order with four different chains, and much more.

Full-Throttle Sound Every Time You Plug In

Backed by BOSS's Tube Logic approach, Katana MkII delivers the authentic output distortion characteristics of genuine tube amplifiers, with the sound and feel becoming richer and more responsive as you turn up the volume. But unlike that classic tube amp, Katana MkII's variable Power Control makes it easy to fly in the sweet spot without getting fired from the gig or kicked out of the house. Just throttle back the overall volume as needed to enjoy inspiring, cranked-amp sound anywhere you play, from bedroom to stage.

Amplify Your External Gear

The Katana-50 MkII rocks as a standalone amp, but it also excels as a powered cabinet for a favourite preamp, modeler, or multi-effects unit. Connecting to the rear-panel Power Amp In jack bypasses Katana MkII's preamp and effects, letting you tap straight into the Tube Logic power section, complete with grab-and-go Power Control. And with BOSS Tone Studio, the input can be easily optimized for your particular gear with a high-pass filter and adjustable gain.

One-Touch Recall Of Custom Setups

One of the Katana-50 MkII's most powerful features is the ability to store favourite amp character and effects setups in Tone Setting memories for instant recall. After you've dialled in a sound with the panel controls, simply save it to the desired memory with a quick button hold. Four Tone Settings (two banks of two) are available, with fast selection right from the panel. It's also possible to connect external footswitches for hands-free control on the gig.

Specifications

Rated Power Output: 50 W
Nominal Input Level: INPUT: -10 dBu (1 M ohm), AUX IN: -10 dBu (20 k ohms)
Speaker: 30 cm (12 inches) x 1

Controls:

POWER switch, MASTER knob, POWER CONTROL switch (STANDBY, 0.5 W, 25 W, 50 W)

[AMPLIFIER]: VARIATION button, AMP TYPE switch (ACOUSTIC, CLEAN, CRUNCH, LEAD, BROWN), GAIN knob, VOLUME knob

[EQUALIZER]: BASS knob, MIDDLE knob, TREBLE knob

[MULTI EFFECT]: BOOSTER button, MOD button, FX button, DELAY button, REVERB button, TAP button, BOOSTER knob, MOD knob, FX knob, DELAY knob, REVERB knob

[TONE SETTING]: CH1 button, CH2 button, PANEL button

Indicators: VARIATION, BOOSTER, MOD, FX, DELAY, REVERB, TAP, CH1, CH2, PANEL

Connectors
INPUT jack: 1/4-inch phone type
POWER AMP IN jack: 1/4-inch phone type
REC OUT/PHONES jack: Stereo 1/4-inch phone type
EXP PEDAL/CTL CH1/CH2 jack: 1/4-inch TRS phone type
AUX IN jack: Stereo miniature phone type
USB port: USB B type
AC IN jack
Power Consumption: 47 W
Accessories: Owner's manual, Power cord

Options (sold separately):
Footswitch: BOSS FS-5L, BOSS FS-6, BOSS FS-7
Expression pedal: Roland EV-5, BOSS EV-30, BOSS FV-500L, BOSS FV-500H
Amplifier Stand: BAS-1

Size & weight

Width: 470 mm / 18-9/16 inches
Depth: 238 mm / 9-3/8 inches
Height: 398 mm / 15-11/16 inches
Weight: 11.6 kg / 25 lbs 10 oz

Read more
MRP:$299.77 SAVE 21%
 1 in stock $236.64
Boss MD-200 Modulation Effects Pedal Boss MD-200 Modulation Effects Pedal Boss MD-200 Modulation Effects Pedal Boss MD-200 Modulation Effects Pedal
Boss MD-200 Modulation Effects Pedal (modulation effects pedal)
Cat: 996868 Rel: 18 Mar 24 • View all Effects pedals
 
Modulation effects pedal
Notes: Simply sophisticated

With the 200 series, BOSS introduces a new generation of pedals that pack advanced sound and versatility into a streamlined size that saves space on your board. Grab-and-go controls and multi-function switches make operation easy and intuitive, while onboard memories allow you to store multiple setups for instant recall. All 200 series pedals feature premium audio quality with 32-bit internal processing and offer support for external control via footswitches, an expression pedal, or MIDI.

Outfitted with algorithms from the flagship MD-500, the MD-200 Modulation delivers an array of world-class effects in one small, convenient pedal. Twelve different modes provide every mod sound you need and more, and each includes customized controls that unlock deep tone shaping right from the panel. And with the powerful insert function, it's simple to patch in drive pedals and other effects for selectable pre or post processing.

Version 1.1 Update: User Memory Expansion

The free Version 1.1 software update brings increased flexibility to the BOSS 200 series, greatly expanding the onboard memory capacity for storing and recalling sounds. There are now 128 user setups available. Setups can also be recalled directly via MIDI program change.

For optimal performance, stay up to date with the current MD-200 system software.

Twelve Mod Essentials in One Pedal

Compact and mighty, the MD-200 gives you every key mod effect in a minimal footprint. Modern and vintage BOSS chorus effects are included, plus phaser, flanger, rotary, vibrato, and tremolo. Classic vibe and '70s phaser effects are also available, complete with selectable distortion for added versatility. BOSS's famous Slicer delivers lots of cool rhythmic grooves, while the rich Overtone effect dishes up fat octave tones and unique sonic colours. There's a highly adjustable auto wah as well, which can double as a foot wah when an expression pedal is connected.

Dial in Sounds Fast

With the MD-200's simple and direct interface, it's easy to craft inspiring sounds in the heat of the moment. Using dedicated controls, you can quickly dial in rate, depth, and level for any selected mode. You can also tap in the rate with a footswitch while playing, and visually set note subdivisions right from the panel. Going further, three additional parameter knobs dynamically change functions with each mode, providing extended tone shaping with no need to menu dive.

Save and Recall Your Favourite Setups

The MD-200 features 127 user memories plus a real-time panel setting, giving you 128 total setups to choose from. Any range of consecutive memories and the panel setting can be assigned for scrolling access from a footswitch. It's also possible to limit the scrolling range or assign memories directly for even faster recall. And if you crave deeper control, setups can be directly recalled via program change messages from an external MIDI device.

Instantly Change Effect Order for Optimum Tone

Using the MD-200's insert loop function, you're able to patch external pedals, set the ideal effect order, and save the setting to an onboard memory. For example, you can place a phaser or classic vibe before an external pedal in one memory, a chorus or flanger after in the next, and then switch between them. This is particularly useful with drive pedals, where the signal order can have a dramatic effect on the selected mod sound.

Deep Real-Time Control

By default, the MD-200's multi-function footswitches control bypass, memory scrolling, and tap tempo, but you can easily reassign them to alternate functions as needed. External control is also possible via footswitches or an expression pedal, and MIDI I/O is even provided on space-saving mini TRS jacks. Via MIDI, you're able to chain multiple 200 series pedals and select memories on all of them at once, and also control various functions from MIDI devices like the ES-8 and ES-5 effects.

Specifications

Sampling Frequency: 96 kHz
AD/DA Conversion: 32 bits
Processing: 32-bit floating point
Modes:12 modes; CHORUS, CE-1 CHORUS, FLANGER, PHASER, VINTAGE PHASER, CLASSIC VIBE, VIBRATO, TREMOLO, ROTARY, AUTO WAH, SLICER, OVERTONE
Memory: 127 + Manual
Nominal Input Level: INPUT A/MONO, B: -10 dBu
Maximum Input Level: INPUT A/MONO, B: +7 dBu
Input Impedance: INPUT A/MONO, B: 2 M ohm
Nominal Output Level: OUTPUT A/MONO, B: -10 dBu
Maximum Output Level: OUTPUT A/MONO, B: +7 dBu
Output Impedance: OUTPUT A/MONO, B: 1 k ohms
Recommended Load Impedance: OUTPUT A/MONO, B: 10 k ohms or greater
Bypass: Buffered bypass
Controls: ON/OFF switch, MEMORY/TAP switch, MODE knob, RATE knob, DEPTH knob, E. LEVEL knob, PARAM 1 knob, PARAM 2 knob, PARAM 3 knob, TAP DIVISION button, MEMORY button
Display: 7 segments, 3 characters (LED)
Indicator: TAP DIVISION indicator, MEMORY (MAN, 1--4) indicators

Connectors:
INPUT (A/MONO, B) jacks, OUTPUT (A/MONO, B) jacks: 1/4-inch phone type
CTL 1, 2/EXP jack: 1/4-inch TRS phone type
MIDI (IN, OUT) jacks: Stereo miniature phone type
DC IN jack

USB port: USB micro B-type (program update only)
Power Supply: Alkaline battery (AA, LR6) x 3, AC adaptor (sold separately)
Current Draw: 225 mA
Expected Battery Life Under Continuous Use: Alkaline: Approx. 4 Hours
* These figures will vary depending on the actual conditions of use.
Accessories: Leaflet "USING THE UNIT SAFELY", Leaflet "To obtain the Owner's Manual", Alkaline battery (AA, LR6) x 3, Rubber foot x 4

Options (sold separately)
AC adaptor: PSA-S series
Footswitch: FS-5U
Dual footswitch: FS-6, FS-7
Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5
MIDI/TRS connecting cable: BMIDI-5-35, BMIDI-1-35, BMIDI-2-35, BCC-1-3535, BCC-2-3535

Size & weight
Width: 101 mm / 4 inches
Depth: 138 mm / 5-7/16 inches
Height: 63 mm / 2-1/2 inches
Height (including rubber foot)65 mm 2-9/16 inches
Weight: 610 g / 1 lb 6 oz
Weight (including battery)680 g / 1 lb 8 oz

0 dBu = 0.775 Vrms
Read more
MRP:$271.37 SAVE 21%
 1 in stock $214.56
Boss ME-90 Multi-Effects Processor Pedal Boss ME-90 Multi-Effects Processor Pedal Boss ME-90 Multi-Effects Processor Pedal
Cat: 997470 Rel: 15 Feb 24 • View all Effects pedals
 
Multi-effects processor pedal
Notes: Dial in Professional Sounds in Seconds

The BOSS ME series has been a favourite of performing guitarists for over three decades, combining multi-effects power with intuitive hands-on control for crafting tones in seconds. The ME-90 is the most advanced ME model to date, offering exceptional audio quality, flagship-grade AIRD amp models, IR loading, an effects loop, and more. Compact, battery-powered, and filled with premium BOSS tones, this versatile all-in-one processor makes it easy to build customized sound setups for every playing situation.

Fast Sound Creation

With its knob-driven interface and diverse effects selection, the ME-90 lets you build configurations and tweak tones with the ease of a stompbox-filled pedalboard-without the hassle of fastening tape, power distribution, and multiple connection cables. Just dial up an amp model or effect type within a category and turn the knobs to get the sound you want. There are 36 preset patches with ready-to-play pro tones, plus 36 user patches for storing your custom creations.

Flexible Real-Time Control

The ME-90 features eight footswitches with smooth, quiet operation and an expression pedal with an integrated toe switch. Use Memory mode to call up complete patch setups with the footswitches, and then switch to Manual mode for direct on/off control of each effect category within the patch. The footswitch LEDs light in different colours for quick identification in the heat of a performance. It's also possible to set all LEDs to light in a fixed colour for each mode if desired.

High-Quality BOSS Effects

The ME-90 puts a massive library of BOSS effects at your command, offering seven different categories filled with selections derived from the flagship GT-1000. Everything you need is here, from overdrives and distortions to pitch/mod effects, delays, and high-quality reverbs. You also get 11 dedicated Pedal FX, a looper, and specialized effects such as acoustic simulation and down tuning. There are 60 effect types in total, with access to over 20 more via BOSS Tone Studio. A send/return loop is available for external pedals, complete with the ability to save the on/off status in patches and place the loop before or after amp models in the signal chain.

Premium Amp Sounds with AIRD Technology

Along with its effects, the ME-90 includes amp models ported from the GT-1000, driven by our advanced AIRD technology for authentic tube tone and touch response. Eleven onboard amp types offer everything from clean combo sounds to punishing high-gain stacks, and you can access more selections in BOSS Tone Studio. Each amp includes a dedicated cab sound for connecting to a PA or recording device, and you can load three of your favourite speaker IRs to personalize sounds to your taste.

Edit, Customize, and Expand

BOSS Tone Studio for macOS and Windows extends your creative range, allowing you to edit tones and change out some amp and effect types with alternate selections. In addition, you can save and organize patches for different gigs, download pro setups at BOSS Tone Central, and swap patches with the ME-90 community on BOSS Tone Exchange. The ME-90 also supports the optional Bluetoothr Audio MIDI Dual Adaptor, enabling you to stream music from a mobile device and wirelessly shape tones using the dedicated BTS editor app for iOS and Android.

Light, Durable, and Ready to Travel

The ME-90 is lighter than its previous generation model while maintaining the rock-solid durability that BOSS is famous for.

Specifications
Sampling Frequency: 48 kHz
AD Conversion: 24 bits + AF method
AF method (Adaptive Focus method) This is a proprietary method from Roland & BOSS that vastly improves the signal-to-noise (SN) ratio of the AD and DA converters.
DA Conversion: 32 bits
Processing: 32-bit floating point
Effects: 97 Types
Memories: 36 (User) + 36 (Preset)
Phrase Loop: 38 sec. (MONO)
Tuner Internal Detection: +/-0.1 cent
Nominal Input Level: INPUT: -10 dBu, RETURN: -10 dBu
Maximum Input Level: INPUT: +7 dBu, RETURN: +7 dBu
Input Impedance: INPUT: 1 M ohm, RETURN: 1 M ohm
Nominal Output Level: OUTPUT (L/MONO, R): -10 dBu, PHONES: -10 dBu, SEND: -10 dBu
Output Impedance: OUTPUT (L/MONO, R): 1 k ohm, PHONES: 44 ohms, SEND: 1 k ohm
Recommended Load Impedance: OUTPUT (L/MONO, R): 10 k ohms or greater, PHONES: 44 ohms or greater, SEND: 10 k ohms or greater

Controls:BANK DOWN/AMP switch, BANK UP/EQ switch, CTL/REV switch, MEMORY/MANUAL switch, 1/COMP switch, 2/OD/DS switch, 3/MOD switch, 4/DELAY switch, PEDAL FX switch, Gt. AMP/LINE switch, POWER switch, EXIT button, WRITE button, CTL button, EDIT button, PREAMP TYPE knob, GAIN knob, BASS knob, MIDDLE knob, TREBLE knob, LEVEL knob, REVERB knob, COMP/FX1 TYPE knob, SUSTAIN/SENS/-1OCT knob, ATTACK/TONE/-2OCT/DEPTH knob, LEVEL/PEAK/DIRECT knob, OD/DS TYPE knob, DRIVE knob, TONE knob, LEVEL knob, MOD TYPE knob, RATE/KEY knob, DEPTH/HARMONY knob, E.LEVEL/RESONANCE knob, DELAY TYPE knob, TIME knob, FEEDBACK knob, E.LEVEL knob, OUTPUT LEVEL knob, PEDAL FX TYPE knob, PEDAL FX pedal
Display: 7 segments, 2 characters (LED)

Connectors: INPUT jack, OUTPUT (L/MONO, R) jacks, SEND jack, RETURN jack: 1/4-inch phone type
PHONES jack: Stereo miniature phone type
USB COMPUTER port: USB Type-C(R)
Bluetooth ADAPTOR connector: Dedicated connector
DC IN jack

Power Supply: Alkaline battery (AA, LR6) x 4 or AC adapter
Current Draw: 190 mA

Expected battery life under continuous use:
Alkaline battery: Approximately 6.5 hours
* This can vary depending on the specifications of the batteries, capacity of the batteries, and the conditions of use.
Accessories: STARTUP GUIDE, Alkaline battery (AA, LR6) x 4, Leaflet "USING THE UNIT SAFELY"

Options (sold separately)
AC adaptor: PSA-S series
Bluetooth(R) Audio MIDI Dual Adaptor: BT-DUAL
Carry Bag: CB-ME80,CB-BU10

Size & weight

Width: 443 mm / 17-1/2 inches
Depth: 220 mm / 8-11/16 inches
Height: 67 mm / 2-11/16 inches
Maximum Height: 93 mm / 3-11/16 inches
Weight(including battery): 2.9 kg / 6 lb / 7 oz
Read more
MRP:$327.12 SAVE 11%
 1 in stock $290.31
Boss OD-200 Hybrid Drive Effects Pedal Boss OD-200 Hybrid Drive Effects Pedal Boss OD-200 Hybrid Drive Effects Pedal Boss OD-200 Hybrid Drive Effects Pedal
Boss OD-200 Hybrid Drive Effects Pedal (distortion effects pedal)
Cat: 996875 Rel: 18 Mar 24 • View all Effects pedals
 
Hybrid drive effects pedal
Notes: Simply sophisticated

With the 200 series, BOSS introduces a new generation of pedals that pack advanced sound and versatility into a streamlined size that saves space on your board. Grab-and-go controls and multi-function switches make operation easy and intuitive, while onboard memories allow you to store multiple setups for instant recall. All 200 series pedals feature premium audio quality with 32-bit internal processing and offer support for external control via footswitches, an expression pedal, or MIDI.

The OD-200 Hybrid Drive brings next-level sound, feel, and flexibility to overdrive and distortion, combining decades of BOSS tone expertise with innovative technologies. Powered by hybrid analogue/digital circuitry, this dream pedal delivers any drive tone you can imagine via 12 primary modes, 15 boost types, series/parallel gain paths, and more. There's even an advanced gate on board, ideal for both eliminating noise and adding tightness to high-gain drive tones.

Version 1.1 Update: User Memory Expansion

The free Version 1.1 software update brings increased flexibility to the BOSS 200 series, greatly expanding the onboard memory capacity for storing and recalling sounds. There are now 128 user setups available. Setups can also be recalled directly via MIDI program change.

For optimal performance, stay up to date with the current OD-200 system software

Premium Drive Tones with BOSS's Advanced Hybrid Design

The OD-200's next-generation hybrid design seamlessly brings analogue and digital clipping circuits together for the best of all worlds, putting a universe of expressive drive colours under your fingers. Twelve modes offer a variety of premium overdrive, fuzz, and distortion sounds, including a high-gain Brown mode derived from the acclaimed Katana amplifier series. And with the three high-performance "X" drive modes powered by BOSS's cutting-edge MDP tech, you'll experience enhanced definition, clarity, and dynamic response that's perfect for modern playing styles.

Powerful Gain Shaping with Series and Parallel Boosts

While each of the OD-200's 12 main drive modes sound fantastic on their own, you're able to craft tones even further with 15 switchable boost circuits. Placing the boost in series lets you create traditional stacked drive voices, complete with post-gain level to balance with the bypassed sound or kick up the volume for solos. The boost circuit can also be used in parallel with the main mode, enabling side-by-side blending for an unlimited range of unique drive textures.

Kill the Noise and Tighten Your Tone

With its integrated gate circuit, the OD-200 always keeps your signal clear and quiet when you're not playing. The default setting is a great starting point, providing gentle, transparent gating that works well for general playing styles. The decay and threshold controls can also be adjusted for super-fast gate performance when needed, perfect for bringing tightness to heavy modern styles that combine full-throttle gain with precision staccato riffing.

Dial in Sounds Fast

The OD-200 offers a ton of advanced capabilities, but remains as simple to use as any regular distortion stomp. With dedicated controls, you can quickly dial in the gain and overall level for any selected mode, then sculpt the tone with wide-ranging low, mid, and high EQ. There's also a multi-function parameter knob, which changes operation based on the group selected with the panel's parameter switch and LED status indicators.

Save and Recall Your Favourite Setups

The OD-200 features 127 user memories plus a real-time panel setting, giving you 128 total setups to choose from. Any range of consecutive memories and the panel setting can be assigned for scrolling access from a footswitch. It's also possible to limit the scrolling range or assign memories directly for even faster recall.

Specifications

Sampling Frequency: 96 kHz
AD/DA Conversion: 32 bits
Processing: 32-bit floating point
Drive Circuit: Analogue + Digital

Modes:
12 modes
OVERDRIVE, BLUES, SCREAM, CNTR OD, X-DRIVE, DIST, X-DIST, STACK DRIVE, FAT DIST, BROWN, X-METAL, FUZZ

Memory: 127 + Manual
Nominal Input Level: INPUT: -10 dBu
Maximum Input Level: INPUT: +7 dBu
Input Impedance: INPUT: 1 M ohm
Nominal Output Level: OUTPUT: -10 dBu
Maximum Output Level: OUTPUT: +7 dBu (Load Impedance: 220 k ohms or greater)
Output Impedance: OUTPUT: 1 k ohms
Recommended Load Impedance: OUTPUT: 10 k ohms or greater
Bypass: Buffered bypass

Controls: ON/OFF switch, MEMORY/BOOST switch
MODE knob, DRIVE knob, LEVEL knob, PARAM knob, LOW knob, MIDDLE knob, HIGH knob
PARAM button, MEMORY button
Display: 7 segments, 3 characters (LED)
Indicator: PARAM indicator, MEMORY (MAN, 1--4) indicators

Connectors:
INPUT jack, OUTPUT jack: 1/4-inch phone type
CTL 1, 2/EXP jack: 1/4-inch TRS phone type
MIDI (IN, OUT) jacks: Stereo miniature phone type
DC IN jack
USB port: USB micro B-type (program update only)

Power Supply: Alkaline battery (AA, LR6) x 3, AC adaptor (sold separately)
Current Draw: 220 mA

Expected Battery Life Under Continuous Use:
Alkaline: Approx. 6 Hours
* These figures will vary depending on the actual conditions of use.

Accessories:

Leaflet "USING THE UNIT SAFELY"
Leaflet "To obtain the Owner's Manual"
Alkaline battery (AA, LR6) x 3
Rubber foot x 4

Options (sold separately):
AC adaptor: PSA-S series
Footswitch: FS-5U
Dual footswitch: FS-6, FS-7
Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5
MIDI/TRS connecting cable: BMIDI-5-35, BMIDI-1-35, BMIDI-2-35, BCC-1-3535, BCC-2-3535

Size & weight:

Width: 101 mm / 4 inches
Depth: 138 mm / 5-7/16 inches
Height: 63 mm / 2-1/2 inches
Height: (including rubber foot)65 mm / 2-9/16 inches
Weight: 600 g / 1 lb 6 oz
Weight (including battery): 670 g / 1 lb 8 oz
Read more
MRP:$271.37 SAVE 20%
 1 in stock $217.73
Click for better price!
or call +44 20 7424 1960
quote 996875
Boss SY-200 Synthesiser Effects Pedal Boss SY-200 Synthesiser Effects Pedal Boss SY-200 Synthesiser Effects Pedal Boss SY-200 Synthesiser Effects Pedal
Boss SY-200 Synthesiser Effects Pedal (synthesis effects pedal)
Cat: 996878 Rel: 19 Mar 24 • View all Effects pedals
 
Synthesiser effects pedal
Notes: Part of Boss's 200 series, the SY-200 is the latest in a range of guitar synth pedals dating all the way back to the 1970s. Plug in any guitar or bass and layer synth sounds over the raw tone. A versatile and creative way to explore new sounds.

Supplier's Notes:
A World of Synth Tones at Your Feet

Offering a universe of rich, analogue-inspired polyphonic tones in a small footprint, the SY-200 makes it simple to weave BOSS's expressive guitar and bass synth technology into all of your musical journeys. Building on the fun, instant-gratification experience of the acclaimed SY-1, this blue inspiration machine features an expanded sound set, more tone-shaping possibilities, and 128 memories for storing your sonic creations. Two onboard footswitches provide deep real-time performance control, and you can take things even further with external footswitches, an expression pedal, and MIDI.

A Massive Library of Expressive Synth Tones

The SY-200 transforms your guitar or bass into a versatile analogue-flavoured synth, ready to infuse your music with dynamic, compelling, and evocative new voices. This streamlined stomp gives you 171 total sounds organized in 12 intuitive categories, along with adjustable parameters for customizing the tone and response. And with 128 memory locations, you're able to store your favourite sounds and instantly recall them while performing.

Build Custom Sounds Fast

With the SY-200's informative display and hands-on controls, it's quick and easy to call up sounds and balance the direct and synth levels. All the preset synth tones have been dialled in by the BOSS engineers to be inspiring and playable right away. But if you want to go deeper, you can tweak three different parameters for each sound via dedicated knobs.

Flexible Connectivity

The SY-200 smoothly integrates into your setup in a variety of ways. Patch it in your chain like a regular pedal, or use the send and output jacks to route synth and straight guitar sounds to different destinations. And with the send/return loop and level knobs, it's possible to craft unique hybrid sounds by blending one or more pedals in parallel with different synth voices.

Powerful Real-Time Control

The SY-200 provides a massive range of control options while taking up minimal space on your pedalboard. Two customizable footswitches offer multi-functional operation with press-and-hold functionality, allowing you to control synth on/off, memory scrolling, pitch bend, synth hold, and more. Expanded control is possible via external footswitches or an expression pedal, and MIDI I/O is also available to interface with other MIDI-equipped pedals and devices like the ES-8 and ES-5 loop switchers.

Plug-and-Play and Latency-Free

You can use the SY-200 with any guitar or bass-just plug in with a standard 1/4-inch cable and start creating. Thanks to custom DSP and the latest BOSS innovations, you'll enjoy latency-free performance that's a natural extension of your instrument, letting you play freely without altering your normal technique in any way.

Supercharge Your Music with a Diverse Range of Sounds

The SY-200 is loaded with a large library of synthesizer tones to inspire new ideas and bring fresh voices to your music.

LEAD-A wide range of sounds suitable for single-note soloing.
PAD-Full tones that work great with chords, from layered pads to synth brass and more.
STRING-Classic analog-style strings, including layered voices and sweeping textures.
BELL-Percussive synth sounds with metallic resonance.
ORGAN-A large selection of organ sounds, including many with rotary-style modulation.
BASS-Fat synth bass sounds, including filtered and sub-octave tones.
DUAL-Fat synth tones with stacked oscillators.
SWEEP-Dynamic sounds with expressive and engaging movement.
NOISE-Classic analog-style synth noise. Great for percussive sounds and dramatic effects.
SFX-A variety of synth sound effects, including explosive one-shot sounds, animated pitch/filter voices, and more.
SEQ-Pulsating sounds with rhythmic pitch or filter changes.
ARPEGGIO-Generate rhythmic arpeggios based on the notes you play.

Specifications

Sampling Frequency: 44.1 kHz
AD/DA Conversion24 bits
Processing: 32-bit floating point

Modes: 12 modes
LEAD, PAD, STRING, BELL, ORGAN, BASS, DUAL, SWEEP, NOISE, SFX, SEQ, ARPEGGIO

Memory: 128
Nominal Input Level: INPUT, RETURN: -10 dBu
Maximum Input Level: INPUT, RETURN: +7 dBu
Input Impedance: INPUT, RETURN: 2 M ohms
Nominal Output Level: OUTPUT, SEND: -10 dBu
Maximum Output Level: OUTPUT, SEND: +7 dBu
Output Impedance: OUTPUT, SEND: 1 k ohm
Recommended Load Impedance: OUTPUT, SEND: 10 k ohms or greater
Bypass: Buffered bypass

Controls:
ON/OFF switch, MEMORY/CTL 1 switch
TYPE knob, MEMORY knob, 1 knob, 2 knob, 3 knob, D. LEVEL knob, E. LEVEL knob, VARIATION knob
MENU button, EXIT button

Display: Graphic LCD (132 x 32 dots, backlit LCD)

Connectors:
INPUT jack, OUTPUT jack, SEND jack, RETURN jack: 1/4-inch phone type
CTL 2, 3/EXP jack: 1/4-inch TRS phone type
MIDI (IN, OUT) jacks: Stereo miniature phone type
DC IN jack
USB port: USB micro B-type (program update only)

Power Supply: Alkaline battery (AA, LR6) x 3, AC adaptor (sold separately)
Current Draw: 230 mA

Expected Battery Life Under Continuous Use: Alkaline: Approx. 5 Hours
* These figures will vary depending on the actual conditions of use.

Accessories: Leaflet "USING THE UNIT SAFELY"
Leaflet "To obtain the Owner's Manual"
Alkaline battery (AA, LR6) x 3
Rubber foot x 4

Options (sold separately)
AC adaptor: PSA-S series
Footswitch: FS-5U
Dual footswitch: FS-6, FS-7
Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5
MIDI/TRS connecting cable: BMIDI-5-35, BMIDI-1-35, BMIDI-2-35, BCC-1-3535, BCC-2-3535

Size & weight

Width: 101 mm / 4 inches
Depth: 138 mm / 5-7/16 inches
Height: 63 mm / 2-1/2 inches
Height (including rubber foot): 65 mm / 2-9/16 inches
Weight: 630 g / 1 lb 7 oz
Weight (including battery): 700 g / 1 lb 9 oz

0 dBu = 0.775 Vrms
Read more
MRP:$331.33 SAVE 15%
 1 in stock $280.84
Click for better price!
or call +44 20 7424 1960
quote 996878
Buchla & TipTop Audio Mixer & Preamplifier Model 207t Module Buchla & TipTop Audio Mixer & Preamplifier Model 207t Module Buchla & TipTop Audio Mixer & Preamplifier Model 207t Module Buchla & TipTop Audio Mixer & Preamplifier Model 207t Module
Cat: 950885 Rel: 26 Jan 24 • View all Synth modules
 
Mixer & preamplifier module - 28HP.
Notes: A characteristically unique take on mixing from Buchla, with six mono inputs and a built-in mic/guitar pre-amp. Each channel can be cued to a monitor mix, while the first and last channels also include voltage-controlled panning.

Supplier's Notes:
The Tiptop 207t is a modern reimagining of the classic Don Buchla 207 Mixer/Preamplifier from the 1970s 200 Series. This stereo mixer comes with a built-in preamp that allows you to boost external instruments and microphones, making it a versatile tool for any modular setup. The 207t also features a six-channel mixer with a variety of signal routing options, including the ability to route channels to the monitor and L&R signal outputs, with per-channel control over loudness and panning.

Each channel has a Mon switch that sends the channel's signal to the monitor outputs, which are always full-volume and summed to mono, making it useful for basic monitoring applications or rudimentary mixing. The Prog switch sends the signal to the L&R signal outputs, with loudness controlled by the Level Adjustment slider and panning determined by the Channel Assignment knobs. The first and sixth channels offer voltage control of panning; these channels are hard-panned when no CV is applied.

The preamp section features a 1/4" input and multiple gain settings, making it suitable for use with external line level instruments, electric guitars, or dynamic microphones. The continuous amplification control provides added flexibility for your audio needs. Finally, the Expansion In is a stereo input that sums to the left and right main outputs, which is great for chaining multiple 207t modules or adding another stereo source at the final output.

While the 207t's functionality may be simple, it is an essential part of any 200t system, serving as the glue that holds everything together. The Tiptop 207t is a fantastic mixer/preamp option that delivers quality sound and reliable performance.

Buchla 207t Features

Mixer/preamp module based on Don Buchla's original 207 design
Six-channel mixer with per-channel level control and panning
Voltage-controllable panning on channels 1 and 6
Manual panning on channels 2-4
Program switches can act as channel mutes for main outputs
Mon switches route signal (in mono) to Monitor output
Expansion input useful for stereo chaining and more
Re-designed preamp for high audio fidelity
Preamp suitable for use with external instruments, electric guitars, dynamic microphones, and more

Eurorack module
28hp wide
Read more
 More than 10 in stock $244.02
Click for better price!
or call +44 20 7424 1960
quote 950885
Tulsa Sound
Tulsa Sound (180 gram coloured vinyl 8xLP + coloured vinyl 12" box set + hard-back book in slipcase)
Cat: 539770 3. Rel: 05 Oct 23
 
Blues
Call Me The Breeze (LP1: Naturally)
Call The Doctor
Don't Go To Strangers
Woman I Love
Magnolia
Clyde
Crazy Mama
Nowhere To Run
After Midnight
River Runs Deep
Bringing It Back
Crying Eyes
Lies (LP2: Really)
Everything Will Be Alright
I'll Kiss The World Goodbye
Changes
Right Down Here
If You're Ever In Oklahoma
Ridin' Home
Going Down
Soulin'
Playing In The Street
Mo Jo
Louisiana Women
Crying (LP3: Okie)
I'll Be There (If You Ever Want Me)
Starbound
Rock & Roll Records
The Old Man & Me
Everlovin' Woman
Cajun Moon
I'd Like To Love You Baby
Anyway The Wind Blows
Precious Memories
Okie
I Got The Same Old Blues
Hey Baby (LP4: Troubadour)
Travelin' Light
You Got Something
Ride Me High
Hold On
Cocaine
I'm A Gypsy Man
The Woman That Got Away
Super Blue
Let Me Do It To You
Cherry
You Got Me On So Bad
Thirteen Days (LP5: 5)
Boilin' Pot
I'll Make Love To You
Don't Cry Sister
Too Much For Me
Sensitive Kind
Friday
Lou-Easy-Ann
Let's Go To Tahiti
Katy Kool Lady
Fate Of A Fool
Mona
Carry On (LP6: Shades)
Deep Dark Dungeon
Wish I Had Not Said That
Pack My Jack
If You Leave Her
Mama Don't
Runaround
What Do You Expect
Love Has Been Gone
Cloudy Day
City Girls (LP7: Grasshopper)
Devil In Disguise
One Step Ahead Of The Blues
You Keep Me Hangin' On
Downtown LA
Can't Live Here
Grasshopper
Drifter's Wife
Don't Wait
A Thing Going On
Nobody But You
Mississippi River
Does Your Mama Like To Reggae
Dr Jive
Money Talks (LP8: #8)
Losers
Hard Times
Reality
Takin' Care Of Business
People Lie
Unemployment
Trouble In The City
Teardrops In My Tequilla
Livin' Here Too
Dick Tracy (12": The Early Years)
It's A Go-Go Place
Outside Looking In
In Our Time
After Midnight
Slow Motion
 in stock $254.54
The Complete Studio Albums 1986-1991
The Complete Studio Albums 1986-1991 (10xLP box set + fold-out poster + booklet + photo cards + sticker)
Cat: LPCND 33011. Rel: 07 Dec 23
 
Jazz
The Chick Corea Elektric Band (LP1)
The Chick Corea Elektric Band (LP2)
Light Years (LP3)
Light Years (LP4)
Eye Of The Beholder (LP5)
Eye Of The Beholder (LP6)
Inside Out (LP7)
Inside Out (LP8)
Beneath The Mask (LP9)
Beneath The Mask (LP10)
 in stock $200.64
Crazy Tube Circuits HiPower Amp & Speaker Simulation Effects Pedal Crazy Tube Circuits HiPower Amp & Speaker Simulation Effects Pedal Crazy Tube Circuits HiPower Amp & Speaker Simulation Effects Pedal
Cat: 986581 Rel: 02 Jan 24 • View all Effects pedals
 
Pedal + amp-in-a-box overdrives recreating legendary sounds, following the success of Crossfire and Unobtanium
Notes: HI POWER is Crazy Tube Circuits' next endeavour in pedal + amp-in-a-box overdrives recreating legendary sounds, following the success of Crossfire and Unobtanium.

It was inspired by the sonic combination of two British tone machines. The almighty Colorsound Power Boost meets the blistering high-headroom Hiwatt amp.

While the combination of these two units directly hints at the gear setup of David Gilmour and especially the gear used on Pink Floyd's album: Wish You Were Here (think the guitar solo sounds of "Shine on you Crazy Diamond", "Have A Cigar") the sonic options are endless.

The orange enclosure silicon transistor circuit (Colorsound Power Boost) can deliver from a transparent clean boost to an all-out fuzz driving a tube amp to sonic bliss. Crazy Tube Circuits set out to clone the original unit featuring the true-to-the-original spec BC184 transistors running on 18V DC (via an internal voltage booster circuit).

The ultra-flexible 2-band Baxandall EQ circuit can add bite and low-end rumble to any setup. Crazy Tube Circuits used a reverse log gain pot (labelled as volume), compared to the linear taper pot found in the original units and acted as an on/off switch, to be able to set the amount of boost/overdrive more precisely. While the earlier units didn't feature a master volume control (only as an aftermarket mod - Pete Cornish made an external unit master volume for David Gilmour's Power Boost) Crazy Tube Circuits chose to include one that is setup in a way so that when it is all the way clockwise it is bypassed. Later versions of the Power Boost had 9V power supply and were renamed as the "Overdriver" due to the lower headroom and their ability to drive the signal earlier. They were offered in a grey enclosure and can be seen in the gear setups of Jeff Beck, Marc Bolan, etc. Crazy Tube Circuits chose to incorporate this version as well with a flip of a toggle switch (PWR-ODR toggle switch).

On the left side of the HI POWER you will find an all-analogue circuit set out to emulate the sound and feel of a Hiwatt amp. Following the path of the famed British tube amplifier, this circuit offers authentic amp tone and feel resembling guitar tones from guitar greats like David Gilmour, Pete Townsend, Jimmy Page, Noel Gallagher to name a few. From the big bold high-headroom clean sounds to the face-melting crunchy tones.

True to the last detail, Crazy Tube Circuits have included the full EQ section along with a presence control located at the negative feedback of the power amp simulation circuit. A headroom toggle switch selects between the high headroom 100w power section provided by a quartet of EL34s (think Hiwat DR103), or the lower headroom and compression provided by a 50W power section with a pair of EL34s when hit hard (think DR504). Similar in operation to the original amps the master volume was designed to produce more gain at higher settings.

Crazy Tube Circuits taken the design a step further by adding a switch to select between input channels of the amplifier. You can select between the full response of the normal channel of the amplifier, the increased presence and tight low end of the bright channel input or the "Gilmour-ish" enhanced frequency response and added gain of those inputs linked together. This follows the modifications that Pete Cornish did to all David Gilmour's Hiwatt amps.

Like their other dual overdrive/amp-in-a-box designs, Crazy Tube Circuits also included a passive effects loop to give you the option to connect your beloved pedals between your booster/overdrive and amp in a box or use the two sections as separate and independent effects when using an external bypass switcher/looper. Gilmour enthusiasts will love to insert their Big Muff, Tube Driver and Phase 90 in there. Note that all pedals inserted in the passive effects loop are still in the signal chain when any or both sections of HI POWER are in bypass.

HI POWER features a power-up bypass/engage pre-set function for the footswitches. That way you can select which state your pedal will go to when you plug the power supply. This function comes in especially handy to people that use remote pedal switchers / loopers as they only set the state of the pedal once and then operate from the controller.

All-analog dual booster/overdrive - amp in a box.
Recreates the tones of the legendary setup used by David Gilmour in the recordings of Pink Floyd's Wish You Were Here album.
Right side: Faithful reproduction of the Colorsound Power Boost/Overdriver circuits with true-to-the-original-spec BC184 transistors.
Controls: gain, bass, treble, master, voicing toggle.
Wide gain range control: from transparent boost to gnarly and fuzzy overdrive.
Two-band (treble & bass) Baxandall EQ.
Master knob sets overall output. Huge amount of dB boost available.
Toggle switch to select between the 18V Power Boost style circuit or the 9V Overdriver style circuit.
Left side: Hiwatt AMP in a box overdrive.
All analog simulation of the preamp and power amp sound and response.
Controls: gain, bass, middle, treble, master, input channel toggle switch, headroom toggle switch.
Gain control: from clean to big bold British crunch/overdrive.
3-band Hiwatt style EQ (bass, middle, treble).
Presence control follows the original design/is located at the negative feedback of the power amp simulation circuit to control the amount of upper mid and high frequencies.
Master knob sets overall output volume. Designed to respond like the original control producing more gain at higher settings.
Input channel toggle switch selects between normal, bright, or linked input channels of the AMP for different voicing and gain levels.
Headroom toggle switch selects between the high headroom and dynamic response of a 100W amp or the lower headroom and compression of a 50W power amp.
Independent operation of the BOOST/OVERDRIVE and AMP sections
Click-less true bypass design via high-quality relays for each section.
2 Footswitches / 2 Status LEDs - one for each effect section.
Power-up bypass/engage preset function for the footswitches.
Top-mounted jacks
Passive series effects loop to connect pedals between the two sections or use them separately as independent effects.
Power Supply: Use only 9V DC, 2.1 mm x 5.5 mm, center negative (not included).
Runs internally at 18V DC (via voltage doubler circuit) for higher headroom and tube-like performance.
Current consumption: 84mA.
British Racing Green die-cast enclosure with color-coded lettering for the control section (orange for BOOST/OVERDRIVE section, white for AMP section).
Dimensions: (W x L x H): 119 x 97 x 53 mm.
Weight: 444 g.
Made in Greece.
Read more
 4 in stock $247.18
Click for better price!
or call +44 20 7424 1960
quote 986581
Crazy Tube Circuits Sidekick Jr. Time-Based Multi-Effects Pedal Crazy Tube Circuits Sidekick Jr. Time-Based Multi-Effects Pedal Crazy Tube Circuits Sidekick Jr. Time-Based Multi-Effects Pedal
Cat: 969279 Rel: 18 Oct 23 • View all Effects pedals
 
Modulation, delay and reverb effect pedal.
Notes: The perfect companion now comes in a smaller package - introducing Sidekick JR by Crazy Tube Circuits!

Drawing inspiration from the original Sidekick pedal released back in 2019, the aim was to create a compact pedal that combines the most widely used time-based effects, suitable for any gear setup seeking 80s tones and beyond.

From the jangly, ambient, and shimmering sounds of New Wave, Shoegaze, and Synth Pop to the wet tones of Hair / Glam Metal. Crazy Tube Circuits' Sidekick JR offers even more sounds / algorithm selections compared to the original unit.

The modulation effects / algorithms take inspiration from classic 80s stompboxes. The "Ensemble" algorithm replicates warm and mild modulated chorus sounds, while the "dimension" algorithm enhances the 3D image of your sound without the typical chorus warble. The "flanger" algorithm draws from a classic flanger pedal set up as a slow chorus with mild feedback added for a more metallic sound.

The Echo / delay section provides the sweet and vibrant sound of a tape echo with a freshly installed tape running through a colourful preamp, or the pristine repeats of an 80s digital delay rack unit.

The Reverb section in Sidekick JR is inspired by definitive examples of 80s reverb rack units and offers two algorithm banks. Bank A includes all-time classic reverb sounds like "plate," "spring," and "hall," while Bank B features signature 80s reverb sounds like "gated," "exciter" (Crazy Tube Circuits' trademark big-hall reverb algorithm with almost infinite reflections and decay), and octave-up "shimmer."

To provide full flexibility in the smallest enclosure possible, Crazy Tube Circuits has devised a smart switching setup. The delay and reverb effect sections of Sidekick JR operate independently from each other, and the modulation is assignable to any of these sections as standard. With the addition of the XT footswitch (available separately), the modulation section becomes entirely independent and can be switched on/off (true bypass) on its own.
Crazy Tube Circuits' Sidekick JR also features a power-up bypass/engage pre-set function for the onboard footswitches. This feature allows users to select the state the pedal will go to when the power supply is plugged in. It's particularly useful for individuals who use remote pedal switchers /loopers, as they can set the power-up state of the pedal once and then operate it from the controller.
Read more
 1 in stock $258.74
Click for better price!
or call +44 20 7424 1960
quote 969279
Dannysound MML Filter Multi-Mode Ladder Filter Module Dannysound MML Filter Multi-Mode Ladder Filter Module Dannysound MML Filter Multi-Mode Ladder Filter Module
Cat: 967619 Rel: 12 Dec 23 • View all Synth modules
 
Multimode transistor ladder filter module with red mode feedback distortion - 6HP.
Notes: The updated "Skiff friendly" design of the mml filter now features bipolar "Attenu-verters" for the cv controls as well as an all new red mode!

This new mode activates a feedback distortion circuit capable of actually changing the pitch of the notes coming in to the filter in a musical way that adds instant variety to acid basslines, creates weird and strange alterations to drones or adds some nice overdriven distortion to whatever goes into it!

The multi-mode ladder (mml) filter is based on the classic transistor ladder low pass filter by dr. Robert a. Moog. This filter updates the classic 4-pole ladder design to provide band pass and high pass filter responses as well as the traditional low pass filter. There are 2 bipolar controls with attenu-verters for the cut-off frequency plus a cv input for the resonance.

The core of the circuit features a fully discrete transistor design with an op-amp buffered output, this allows soft saturation of the input signal to get the classic overdriven tones of the ladder filter. A bass compensation circuit has been included to retain the bass response in low pass mode when the resonance is increased. The bass compensation also helps to improve the response of the high pass filter.

The red mode is activated/de-activated by holding the mode button for 0.3s. In this mode the filter cut-off, input volume and resonance all interact and the effect is to produce alterations to the incoming frequencies. The pitches of the audio coming into the filter also affect the alterations as well selecting between low pass, band pass and high pass filter modes whilst in red mode.

Features

Low pass, band pass and high pass modes.
Red mode feedback distortion.
CV controlled resonance.
Added low frequency compensation.
Soft saturation of input.
2 x bipolar attenuverter CV inputs.

Width: 6 HP
Depth: 25mm
Power: +12v = 50ma / -12v = 39ma
Read more
 1 in stock $270.31
Click for better price!
or call +44 20 7424 1960
quote 967619
Death By Audio Disturbance Lockable LFO Modulator Effects Pedal (B-STOCK) Death By Audio Disturbance Lockable LFO Modulator Effects Pedal (B-STOCK) Death By Audio Disturbance Lockable LFO Modulator Effects Pedal (B-STOCK) Death By Audio Disturbance Lockable LFO Modulator Effects Pedal (B-STOCK) Death By Audio Disturbance Lockable LFO Modulator Effects Pedal (B-STOCK)
Cat: 977102 Rel: 01 Jan 90 • View all Effects pedals
 
B-STOCK: Box opened, light surface marks, product in perfect working condition
Notes: ***B-STOCK: Box opened, light surface marks, product in perfect working condition ***


The DISTURBANCE is an extreme filter, flanger, and phaser with modulation like you've never heard before.

DISTURBANCE's controls allow for a wide range of sounds to be sculpted perfectly to your needs. The 'Tensity' knob changes the feedback amount and structure of all effects, with two totally different intensity options to choose from for each disturbing modulation. The Filter allows for deep swells and piercing resonance with highpass and lowpass options.

The Flanger creates a classic modulation sound with options for watery, multi-tap delay matrixes or a screaming flange with distorted feedback. Last but certainly not least, the Phazer mode is a psychedelic 8-stage phaser sound with options for mellow filtered scoops on one side and combination phaser/flanger on the other.

But that's not all - the pedal introduces a brand-new way to control an effect: The custom designed modulation core lets you pause the LFO where it stands and listen to the strange world of frozen modulation. Not only does this new system control its own sounds, the DISTURBANCE includes a CV OUT jack which lets the modulation control signal be sent to whatever device dares let it in.

Go forth and DISTURB and bend, break, and twist your sound!
Read more
MRP:$278.74 SAVE 20%
 1 in stock $221.62
Digitech SDrum Strummable Drums Pedal Digitech SDrum Strummable Drums Pedal Digitech SDrum Strummable Drums Pedal Digitech SDrum Strummable Drums Pedal Digitech SDrum Strummable Drums Pedal Digitech SDrum Strummable Drums Pedal Digitech SDrum Strummable Drums Pedal Digitech SDrum Strummable Drums Pedal
Cat: 976051 Rel: 20 Dec 23 • View all Effects pedals
 
Drum machine pedal
Notes: DigiTech announces SDRUM Strummable Drums, the first-ever intelligent drum machine for guitarists and bassists. Boasting studio-quality samples and five professional sounding drum kits and BeatScratch technology, SDRUM allows users to create drum patterns by simply strumming strings.

As a player scratches across guitar or bass strings, he or she "teaches" SDRUM a kick/snare pattern that defines a desired beat. Once that pattern is established, SDRUM then enhances and enriches the beat, resulting in a realistic accompanying drum part. From the five different kits, users are able to choose sounds appropriate to a broad variety of musical styles. Via the KICK and SNARE Pads, players can audition the various kits and tap in specific beats, while the GUITAR AUDITION Button enables the user to turn the drum output on or off while strumming.

Up to 36 songs can be stored in SDRUM, and the unit supports three different components - e.g. verse, chorus, bridge - for each that can be switched on in real-time to easily facilitate live performance and aid in composition and creativity. Additionally, JamSync functionality facilitates compatibility with JamMan loopers, further boosting SDRUM's capacity in concert, practice, and studio settings.

The compact SDRUM (5.25" x 3.15" x 2.3") is similar in size to most compact effects units and fits easily on standard pedalboards. A sturdy metal chassis, robust footswitch, and four knobs (GROOVE/KIT, LEVEL, TEMPO, and HAT/RIDES) ensure that SDRUM is stage- and road-ready.

Eliminating the need to sift through libraries of rhythm patterns in search of an appropriate match for individual songs and styles, SDRUM is the fastest way to go from a beat idea to a working drum track.

BeatScratch Technology
JamSync Support
Studio-quality samples
Five drum kits
Verse/Chorus/Bridge parts
Alternate instruments/voicings
External FS3X support
Kick/Snare pads
Controls: Tap Tempo, Verse/, Chorus, Bridge, Song, Groove/Kit, Hats/Rides, Level, Temp, Alt Kit, Alt Hats/Rides, Guitar Audition, Kick Snare, Footswitch
5.25" (L) x 3.15"(W) x 2.3" (H)/ 133mm (L) x 80mm (W) x 58mm (H)
1.12 lb./.51 kg
Power Supply (external - included): PS0913DC-04 (US, JA, EU, AU, UK)
Warranty: 1 Year
Read more
MRP:$346.05 SAVE 16%
 1 in stock $289.26
Click for better price!
or call +44 20 7424 1960
quote 976051
The Live Albums: 1978-1992
The Live Albums: 1978-1992 (180 gram vinyl 12xLP box set + booklet + lithographs)
Cat: 554059 6. Rel: 02 Nov 23
 
Rock
Alchemy (LP1)
Alchemy (LP2)
Alchemy (LP3)
On The Night (LP4)
On The Night (LP5)
On The Night (LP6)
On The Night (LP7)
Encored (LP8)
Live At The BBC (LP9)
Live At The Rainbow (LP10)
Live At The Rainbow (LP11)
Live At The Rainbow (LP12)
 in stock $203.00
Live 1978-1992
Live 1978-1992 (12xLP + booklet + lithographs in spot-varnished slip-case)
Cat: RHI 7257581. Rel: 18 Jan 24
 
Rock
Once Upon A Time In The West (LP 1: Alchemy) (10:08)
Industrial Disease (8:16)
Expresso Love (5:26)
Romeo & Juliet (4:52)
Love Over Gold (6:01)
Private Investigations (LP 2: Alchemy) (7:22)
Sultans Of Swing (6:48)
Twisting By The Pool (7:32)
Two Young Lovers (5:30)
Portobello Belle (6:21)
Tunnel Of Love (LP 3: Alchemy) (9:54)
Solid Rock (9:31)
Telegraph Road (14:25)
Going Home (Theme From 'Local Hero') (3:37)
Calling Elvis (LP 4: On The Night) (10:02)
Walk Of Life (5:04)
Heavy Fuel (5:59)
Romeo & Juliet (9:18)
Private Investigations (LP 5: On The Night) (9:08)
Sultans Of Swing (12:13)
Fade To Black (4:37)
Your Latest Trick (5:04)
When It Comes To You (5:32)
I Think I Love You Too Much (6:53)
You & Your Friend (LP 6: On The Night) (7:21)
On Every Street (5:59)
Two Young Lovers (5:19)
Tunnel Of Love (15:46)
Telegraph Road (LP 7: On The Night) (12:13)
Money For Nothing (6:48)
Brothers In Arms (8:18)
Your Latest Trick (LP 8: encores)
The Bug
Solid Rock
Local Hero - Wild Theme
Down To The Waterline (LP 9: live At The BBC) (3:58)
Six Blade Knife (3:50)
Water Of Love (5:32)
Wild West End (4:59)
Sultans Of Swing (6:24)
Lions (6:16)
What's The Matter Baby? (3:12)
Tunnel Of Love (11:50)
Down To The Waterline (LP 10: live At The Rainbow) (3:08)
Six Blade Knife (7:41)
Once Upon A Time In The West (6:29)
Lady Writer (3:41)
Lions (5:56)
Sultans Of Swing (6:45)
Les Boys (6:06)
Portobello Belle (4:12)
News (LP 11: live At The Rainbow) (3:46)
What's The Matter Baby? (2:56)
Setting Me Up (3:25)
In The Gallery (6:50)
Solid Rock (4:10)
Southbound Again (4:33)
Where Do You Think You're Going? (4:27)
Wild West End (LP 12: live At The Rainbow) (5:15)
Twisting By The Pool (3:47)
Good Morning Little Schoolgirl (with Phil Lynott & Tony De Meur) (2:48)
That's Alright Mama (with Phil Lynott & Tony De Meur) (2:05)
Nadine (with Phil Lynott & Tony De Meur) (3:49)
Keep On Knocking (with Phil Lynott & Tony De Meur) (6:13)
 in stock $273.47
EarthQuaker Devices The Wave Transformer Transfiguration Oscillator Module EarthQuaker Devices The Wave Transformer Transfiguration Oscillator Module EarthQuaker Devices The Wave Transformer Transfiguration Oscillator Module EarthQuaker Devices The Wave Transformer Transfiguration Oscillator Module EarthQuaker Devices The Wave Transformer Transfiguration Oscillator Module EarthQuaker Devices The Wave Transformer Transfiguration Oscillator Module EarthQuaker Devices The Wave Transformer Transfiguration Oscillator Module
Cat: 991963 Rel: 19 Jan 24 • View all Synth modules
 
A complex single oscillator with 7 audio outputs
Notes: The Wave Transformer is a complex single oscillator with 7 audio outputs. Its method of wave shaping differs from other complex oscillators in that it is not based upon classic wave folding such as is common in West Coast synthesis, or filtration such as is common in East Coast synthesis.

This analogue, vintage-voiced, voltage-controlled oscillator features over 8 octaves of accurate pitch tracking. Its 7 simultaneous wave outputs include a unique Complex output. This strange and novel output varies between a simple waveform (triangle, unless you patch a signal into the Shape Insert jack) and a complex transformation of the harmonic structure of the original waveform. It contains a unique mixture of the fundamental frequency, odd order harmonics, even order harmonics and subharmonics. The Sub Octave panel control will determine whether the sub harmonics are derived from one octave down, two octaves down, or are muted altogether. It will vary from a simple waveform to a silhouette of your cat watching you as you react to a "present" that it left for you on the counter. No, seriously.

The module's Transform control morphs from a basic waveform through many strange iterations into a complex, gnarled mass of audio mutations at the Complex output using an asymmetrical multi differential audio transmutation circuit. You can yield countless variations on these permutations by combining this novel circuit with Hard Sync, Soft Sync, Linear FM and Exponential FM.

Additionally, you can mute the source waveform to use the circuit as a harmonic gate/VCA, rendering the Wave Transformer a voice unto itself.

If that is not enough, there is a Shape Insert that allows you to transform external oscillations and modular-level audio sources.
Read more
 2 in stock $215.62
Electro-Harmonix MOP-D10 Isolated Power Supply Electro-Harmonix MOP-D10 Isolated Power Supply Electro-Harmonix MOP-D10 Isolated Power Supply Electro-Harmonix MOP-D10 Isolated Power Supply
Cat: 971190 Rel: 02 Oct 23 • View all Pedalboards & Pedalboard Accessories
 
Power up to ten 9V pedals with noise-free operation!
Notes: The MOP-D10 is a multi-output power source that was developed by EHX engineers to provide a player with noise-free pedal operation. It features ten isolated 9VDC outputs that handle the most popular power requirements: 4x100mA, 2x250mA, 2x300mA and 2x400mA.

From its premium analogue power path featuring low-noise linear regulators to its custom-wound toroidal transformer, the MOP-D10 is designed to let a pedal user achieve a sonically pure signal path. Unlike many other multi-output power supplies which rely on switching power conversion, the MOP-D10's transformer-based power conversion is significantly less susceptible to spurious noises leaking into the audio path. An AC Voltage Selector Switch also ensures the MOP-D10 can be used with a range of voltages commonly found around the world.

Each of the MOP-D10's outputs is center-negative and all output power jacks are isolated from each other. The dimensions of each output connector are 5.5mm x 2.1mm. The unit is supplied with a 6' detachable power cord and ten 24" long DC power cables equipped with one straight and one right-angle end. It also includes hardware for pedalboard mounting.

Professional pedalboard power solution with ten isolated 9VDC outputs: 4x100mA, 2x250mA, 2x300mA and 2x400mA
Provides a premium analogue power path with low-noise linear regulators
Custom-wound toroidal transformer delivers exceptional isolation and clean power
Relies on transformer-based power conversion which is superior to switching power conversion
AC Voltage Selector Switch allows the MOP-D10 to be used with a range of voltages commonly found around the world
All output power jacks are isolated from each other for noise-free operation
Comes with ten 24" long DC power cables equipped with one straight and one right-angle end
Includes hardware for pedalboard mounting

Specifications

Dimensions (in): 7.87
Year Released: 2021
Read more
 1 in stock $261.91
Click for better price!
or call +44 20 7424 1960
quote 971190
Elite Acoustics GigMix 4-1 4-Channel Mini Digital Mixer With Reverb & Delay Elite Acoustics GigMix 4-1 4-Channel Mini Digital Mixer With Reverb & Delay Elite Acoustics GigMix 4-1 4-Channel Mini Digital Mixer With Reverb & Delay Elite Acoustics GigMix 4-1 4-Channel Mini Digital Mixer With Reverb & Delay
Cat: 976571 Rel: 23 Oct 23 • View all Mischpulte fürs Homestudio
 
4-channel mini digital mixer with reverb & delay effects
Notes: Great value from this compact digital mixer. Pocket-sized four-channel design with one mic input and three line inputs. DSP effects include reverb, shimmer, delay, compression, limiting and EQ.

Supplier's Notes:
GigMix 4-1 mini Digital mixer, porting the engine from the StompMix 4, the GigMix 4-1 is built with a powerful 32-bit 100Mhz DSP engine and a compact lightweight pocket size package. The GigMix 4-1 mini digital mixer offers a full featured, highly intuitive four channels Digital Mixer with a Color Display. 4 effects level control for Reverb and Shimmer. Assignable Delay effects. The DSP engine provides a compressor, limiter, Mid sweepable EQ, Highpass Filter, Notch Filter, Phase reverse to each of the 4 inputs. Analog inputs consisted of 1 Class A solid-state Mic pre-amps and three 1/4" TS line/Instrument inputs. Two sets of stereo Mix outputs are selectable between a 1/8" TRS jack and 2 1/4" TRS jacks with output level control knob . 2 assignable switches, 1/4" TRS Balanced outputs. 10 Memory for easy recall and set up. Mic Stand mounting accessory is also available. The size/functionalities of the Gigmix 4-1 mini digital mixer makes it the great pocket live gig mixer to your guitar/vocal setup.

Features

4-Channel Mini Digital Mixer
10 user scene memories.
Colour display
Input Level Monitoring
1 Class-A Mic inputs with TRIM (CHAN 1)
3 LINE/INSRT inputs with Level Control(CHAN 2, 3 and 4)
Independent Reverb, Shimmer effect on each channel
2 notch filter available on each channel
High Pass Filter and Phase Reverse on each channel
Noise Gate and Compressor on each channel
3 Band EQ with Sweepable MID on each channel
Max 1 second Delay with Tap Tempo (assign to one Channel at a time)
Assignable A/B switch functions (MUTE channels, EFX by-pass, Tap Tempo, Scene change etc)
Output 1 (L/R TRS 1/4" jacks) - Balanced
Output 2 (Stereo TRS 1/8" jack)
Output 2 can be used for Headphones
Main MIX and AUX MIX
Scenes Change - via A/B switches
Metal chassis
AC/DC power supply included
Support 9VDC to 12VDC power inputs (500mA, 2.1mm *Center Positive*)
Designed and assembled in USA
Read more
 1 in stock $228.24
Click for better price!
or call +44 20 7424 1960
quote 976571
Erica Synths Black Stereo Reverb Hi-Fi Stereo FX Module
Cat: 946497 Rel: 17 Oct 23 • View all Synth modules
 
Hi-Fi stereo effects module - 12HP
Notes: The Erica Synths Black Reverb is a versatile hi-fi stereo FX module with lots of unique features based on Erica Synths' custom DSP engine. The reverb sources are selectable Tape, BBD and "dirty BBD" digital; emulations with three modes, each - Room, Hall and Cathedral. Delicate room size control, feedback, feedback tone and stereo spin controls allow for designing extremely delicate reverberation effects. CV control over various parameters and the ability to save up to 10 presets will make this module an integral part of any performance rack.

Features:

Reverb based on Tape, BBD and digital delay lines
Three room sizes
Manual and triggered FREEZE with 1V/oct tracking
10 preset patches
CV control over size, feedback, tone, dry/wet mix and preset selection
Adjustable stereo spin

Specs:

Max audio input level before clipping 16Vptp
CV input range (full span) -5V - +5V
Sampling frequency 48kHz, 24bit
Audio codecs -108 dynamic range, -98dB THD+N
Power consumption 120mA@+12V, 39mA@-12V
Module width 12HP
Module depth 35mm
Read more
 1 in stock $292.40
Click for better price!
or call +44 20 7424 1960
quote 946497
Erica Synths Stereo FX Hi-Fi Stereo Effects Module
Erica Synths Stereo FX Hi-Fi Stereo Effects Module (effect/delay/reverb/dual/stereo module)
Cat: 989861 Rel: 01 Feb 24 • View all Synth modules
 
Hi-fi stereo effects module - 10HP
Notes: The STEREO FX module brings hi-fi stereo effects into the Erica Synths Drum Series. Based on Erica Synths' new DSP engine, the module provides a wide range of custom delay and reverb effects. CV control over various parameters and the ability to save up to 10 presets will make this module an integral part of any performance rack.

Features

Hi-Fi stereo FX module
3 delay and 3 reverb effects
Tap and clock synchronization of delay time
Delay time divisions and multiplications in sync mode
10 preset patches
CV control over delay time, feedback, and preset selection
The FX is developed in collaboration with the Dutch company 112dB which offers some of the best-sounding VST instruments.

Technical specifications:

Audio input level: -5V - +5V
Delay time: 3ms - 3s
CV level (full span): -5 - +5V
Power consumption: +123mA, -40mA
Module width: 10HP
Module depth: 35mm
Read more
 1 in stock $292.40
Click for better price!
or call +44 20 7424 1960
quote 989861
Eventide RipTide Stereo Overdrive & Vibe Effects Pedal Eventide RipTide Stereo Overdrive & Vibe Effects Pedal Eventide RipTide Stereo Overdrive & Vibe Effects Pedal Eventide RipTide Stereo Overdrive & Vibe Effects Pedal Eventide RipTide Stereo Overdrive & Vibe Effects Pedal
Eventide RipTide Stereo Overdrive & Vibe Effects Pedal (distortion/modulation effects pedal)
Cat: 973303 Rel: 11 Oct 23 • View all Effects pedals
 
Eventide's Riptide pedal is the result of extensive research into overdrives and Uni-vibes.
Notes: Eventide's Riptide pedal is the result of extensive research into overdrives and Uni-vibes. With stereo overdrive and Vibe, each effect features dual voicings versatile enough for funky bright tones to explosive and warm lead tones.

The Vibe knob delivers classic Hendrix-style Uni-Vibe to full-on vibrato perfect for modern soul and lo-fi tones. With the power to engage each effect individually, swap the order, and store presets, Riptide makes it easy to get caught up in the excitement.

Drive features a balanced distortion with superb dynamics and touch sensitivity. Use the "Green" voicing for a classic transparent overdrive or activate the "Red" voicing for a tight modern overdrive.

Features:

Five presets loaded at your feet with dozens more available by software update in Eventide Device Manager
Dual-action Active Footswitch is latching or momentary
Rear panel Guitar/Line Level switch for matching impedances with guitar, synths, FX loop, or DAW interface
Map any combination of parameters to an Expression Pedal
Use a single Aux switch to Tap Tempo or a triple Aux switch for easy preset changing
MIDI over TRS capable
Multiple Bypass options: Buffered, Relay, DSP+FX or Kill dry
Catch-up mode helps dial in your sound when toggling between presets/parameters
Eventide Device Manager PC or Mac application for software updates, system settings and creating/saving presets


Read more
MRP:$346.05 SAVE 22%
 1 in stock $270.65
L'Autre
L'Autre (limited numbered orange vinyl LP + 4x7" picture disc + 2xCD box set)
Cat: 559969 0. Rel: 08 Feb 24
 
Coldwave/Synth
Agnus Dei (LP) (5:39)
Desenchantee (5:18)
L'Autre (5:12)
Je T'Aime Melancolie (5:27)
Psychiatric (6:10)
Regrets (duet with Jean-Louis Murat) (5:06)
Pas De Doute (5:11)
Il N'Y A Pas D'Ailleurs (5:43)
Beyond My Control (5:20)
Nous Souviendrons Nous (5:10)
Desenchantee (7") (4:54)
Desenchantee (Chaos mix) (4:15)
Je T'Aime Melancolie (New radio remix - 7") (4:27)
Je T'Aime Melancolie (Smooth mix) (4:15)
Regrets (7") (4:45)
Regrets (Classic bonus Beat edit) (4:51)
Beyond My Control (single mix - 7") (4:51)
Beyond My Control (Ya Ya version) (4:45)
Agnus Dei (CD 1)
Desenchantee
L'Autre
Je T'Aime Melancolie
Psychiatric
Regrets (duet with Jean-Louis Murat)
Pas De Doute
Il N'Y A Pas D'Ailleurs
Beyond My Control
Nous Souviendrons Nous
Agnus Dei (instrumental - CD2)
Desenchantee (instrumental)
L'Autre (instrumental)
Je T'Aime Melancolie (instrumental)
Psychiatric (instrumental)
Regrets (instrumental)
Pas De Doute (instrumental)
Il N'Y A Pas D'Ailleurs (instrumental)
Beyond My Control (instrumental)
Nous Souviendrons Nous (instrumental)
 in stock $204.58
Frequency Central Akropoli Advanced Generative Sequencer Module
Frequency Central Akropoli Advanced Generative Sequencer Module (clock generator/comparator/logic/sequencer module)
Cat: 997141 Rel: 19 Mar 24 • View all Synth modules
 
Generative CV sequencer & 4-channel clock divider module - 16HP
Notes: Advanced generative sequencer featuring mutes per channel and transposition facilities.

Akropoli is an extension and enhancement of our successful Little Melody and High Towers modules, offering the features of both of these modules as well as some of it's own unique features such as mute buttons per channel, manual transpose knob and 1V/oct transpose CV input. Akropoli operates using Frequency Central's proprietary TOOL V2 code, and can count in integers as well as multiples for even more subtle and evolving variations.

Akropoli is a generative sequencer based around clock divisions and a chromatic quantiser, used to create in-the-moment licks and riffs. It is more that the sum of it's parts.

Akropoli's internal operations can be considered as 4 clock dividers patched into a CV mixer via attenuators. The attenuators select notes over a 5 octave range, the clock dividers determine how often those notes are added to the mix. The final output of Akropoli is quantized chromatically for fast set up and continuously pleasing results. Akropoli has an onboard transposition knob, as well as a 1V/oct transposition CV input.

The 4 clock dividers are labelled A, B, C, and D. They all receive clocks from the same source, the divisions may be selected using the presets and the individual division selectors. The clock dividers can be set to count up, down, or to one of a variety of modes that move between counting up and down. For further information on Presets and Modes see the Little Melody User Guide.

Additionally, each clock divider has it's own binary output (either high or low), these 4 outputs can be used to clock/gate/trigger other stuff on other modules to great effect.

Product Specifications

12V draw
50mA

-12V draw
36mA

5V draw
0mA

Depth
35mm
Read more
 1 in stock $261.89
Click for better price!
or call +44 20 7424 1960
quote 997141
Frequency Central Strips 4-Channel VCA Mixer Module
Frequency Central Strips 4-Channel VCA Mixer Module (mixer/equalizer/quad/VCA module)
Cat: 972021 Rel: 09 Oct 23 • View all Synth modules
 
Expandable 4-channel VCA based stereo mixer module - 20HP
Notes: Expandable 4 channel VCA based stereo mixer with tone shaping and FX bus.

Chipset:

For this item, Frequency Central offer a CHIPSET which contains the following:

3 x LM13700

For all other components required, please see the build document.

Features:

4 x input channels, each featuring LEVEL, HIGH, LOW, FX send, PAN, MUTE and CV control of level.
FX send and stereo return + FX phase jumper
Left and Right Eurorack level inputs (2 x 3.5mm sockets)
Left and Right line level outputs (2 x 6.35mm sockets)
Scribble strips!

Strips is also expandable! You can add a second strips, connected to the first via a 16 pin to 16 pin cable. The cable powers the second Strips and gives you 8 channels to play with. The second Strips accesses the first Strips FX bus. When using in expanded configuration, the FX send/return and main outputs for the second Strips are not available. Here's how!

FX phase jumper - because not all FX that you might use in the FX loop are in phase with respect to their input/output. The phase jumper allows you to compensate for this and avoid weird phase cancellations.

Product Specifications

12V draw: - 43mA
5V draw: - 0mA
-12V draw: 43mA
Depth: 39mm
Read more
 1 in stock $290.29
Click for better price!
or call +44 20 7424 1960
quote 972021
Gemini MDJ-600 CD & USB DJ Media Player (B-STOCK)
Cat: 993921 Rel: 01 Jan 90 • View all DJ-Decks
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Trying to find your gateway into modern DJing? Look no further than the MDJ-600 Professional Media Controller. It may be small, but this mighty unit has plenty of capabilities without the need for external software with its USB, MIDI and CD compatibilities.

MDJ-600 - Tiny, Yet Fierce:

A large 4.3-inch vivid full-colour screen is the brilliant focal point of this unit, providing real-time visual feedback of your tracks. Full track information including Title, Time, BPM, and Pitch are clearly displayed alongside the precise full-size waveform window. You'll appreciate the additional visual feedback for Slip Mode, Hot Cues and active Auto/Manual Loops meaning you can confidently use scratches or hot cues without ruining your mix. The 100mm pitch fader ranges pitch from 4% to 100%; you'll mix with surgical precision.

Fast Learning, Faster Results

The MDJ-600's intuitive interface will have you spending less time learning and free up precious time for you to experiment with the 4 Hot Cues, 8 Auto Loops, and the 5-inch touch-sensitive jog wheel with LCD display and resistance control to Slip and Scratch. Bonus MIDI capabilities mean you can even control the parameters of your favourite DJ software directly from the unit, routing your audio through its 24-bit/192kHz soundcard. Of course, the MDJ-600 is fully compatible with our V-Case Library Management Software, which offers users a faster, easier way to manage their music libraries.
Read more
 1 in stock $255.00
Impera Labyrinth Maze Game
Impera Labyrinth Maze Game (gold vinyl LP box set + wooden maze game + slipmat + booklet)
Cat: LMVT 1401841. Rel: 15 Dec 23
 
Metal
Imperium (1:12)
Kaisarion (3:42)
Spillways (2:25)
Call Me Little Sunshine (3:30)
Hunter's Moon (2:26)
Watcher In The Sky (3:41)
Dominion (1:04)
Twenties (2:44)
Darkness At The Heart Of My Love (3:40)
Griftwood (3:54)
Bite Of Passage (0:20)
Respite On The Spitalfields (4:55)
 in stock $270.31
Extended Impera (B-STOCK)
Extended Impera (B-STOCK) (limited numbered 2xLP (side 4 etched) + 12" + 1-sided etched 7" box set + book + booklet + poster + wax seal kit)
Cat: LMVT 2968. Rel: 01 Jan 90
 
Metal
Imperium (Impera) (1:12)
Kaisarion (3:42)
Spillways (2:25)
Call Me Little Sunshine (3:30)
Hunter’s Moon (2:26)
Watcher In The Sky (3:41)
Dominion (1:04)
Twenties (2:44)
Darkness Of The Heart Of My Love (3:40)
Griftwood (3:54)
Bite Of Passage (0:20)
Respite On The Spitalfields (4:55)
Kaisarion (live From The Ministry) (5:03)
Spillways (3:16)
Call Me Little Sunshine (4:44)
Hunter‘s Moon (3:17)
See No Evil (Phantomime EP) (4:03)
Jesus He Knows Me (4:04)
Hanging Around (4:10)
Phantom Of The Opera (7:21)
We Don’t Need Another Hero (4:09)
Stay (7") (4:13)
 in stock $239.82
Extended Impera
Extended Impera (limited numbered 2xLP (side 4 etched) + 12" + 1-sided etched 7" box set + book + booklet + poster + wax seal kit)
Cat: LVR 02968. Rel: 12 Feb 24
 
Metal
Imperium (Impera)
Kaisarion
Spillways
Call Me Little Sunshine
Hunter’s Moon
Watcher In The Sky
Dominion
Twenties
Darkness Of The Heart Of My Love
Griftwood
Bite Of Passage
Respite On The Spitalfields
Kaisarion (live From The Ministry) (5:03)
Spillways (3:16)
Call Me Little Sunshine (4:44)
Hunter‘s Moon (3:17)
See No Evil (Phantomime EP)
Jesus He Knows Me
Hanging Around
Phantom Of The Opera
We Don’t Need Another Hero
Stay (7") (4:13)
 in stock $237.71
IK Multimedia iRig Pro Quattro I/O 4in/2out Portable Audio & MIDI Interface (B-STOCK) IK Multimedia iRig Pro Quattro I/O 4in/2out Portable Audio & MIDI Interface (B-STOCK) IK Multimedia iRig Pro Quattro I/O 4in/2out Portable Audio & MIDI Interface (B-STOCK) IK Multimedia iRig Pro Quattro I/O 4in/2out Portable Audio & MIDI Interface (B-STOCK) IK Multimedia iRig Pro Quattro I/O 4in/2out Portable Audio & MIDI Interface (B-STOCK) IK Multimedia iRig Pro Quattro I/O 4in/2out Portable Audio & MIDI Interface (B-STOCK) IK Multimedia iRig Pro Quattro I/O 4in/2out Portable Audio & MIDI Interface (B-STOCK) IK Multimedia iRig Pro Quattro I/O 4in/2out Portable Audio & MIDI Interface (B-STOCK) IK Multimedia iRig Pro Quattro I/O 4in/2out Portable Audio & MIDI Interface (B-STOCK) IK Multimedia iRig Pro Quattro I/O 4in/2out Portable Audio & MIDI Interface (B-STOCK)
Cat: 902841 Rel: 01 Jan 90 • View all Audio- & MIDI-Interfaces
 
*** B-STOCK: Box opened, but product is in excellent condition and in perfect working order ***
Notes: *** B-STOCK: Box opened, but product is in excellent condition and in perfect working order ***


Field recorder meets interface in this clever offering from IK's iRig range. Essentially a 4-in/2-out audio and MIDI interface with built-in mics, the Quattro is portable, versatile and high quality.

Supplier's Notes:
Pro recording and performing, in the palm of your hand

iRig Pro Quattro I/O is a professional-quality 4 in / 2 out portable audio and MIDI interface packed with everything needed for field recording and content creation, for serious sound and flexibility - anywhere.

Small enough to fit in the palm of your hand, the iRig Pro Quattro I/O still packs in four high-quality, low-noise mic preamps; instrument, RCA and TRS inputs; plus XLR balanced, 3.5mm stereo and headphone outputs - and full MIDI I/O!

iRig Pro Quattro I/O works right out of the box with iPhone, iPad, Android, Mac and PC, but can also serve as a stand-alone mic preamp or line mixer, with a built-in limiter and direct monitoring so you're always guaranteed the perfect take.

Packed with a swiss-army-knife's worth of tools, iRig Pro Quattro I/O ensures you're ready for anything, anywhere.

As a mobile interface

Connected to a computer or mobile device, the iRig Pro Quattro I/O will work as a high-quality, multi-channel audio and MIDI interface with a full array of inputs and outputs so you'll always be prepared for any recording or need. Fully MFi-certified, no adaptors are required for iPhone or iPad for reliable field performance on any device.

As a broadcast / podcast interface

Enable STEREO mode and iRig Pro Quattro I/O mixes all sources down to stereo for streaming or recording. Monitoring is easy thanks to a dedicated headphone output with independent volume control and direct monitoring. Or use MONO mode for streaming to social media; Loopback lets you duet your favourite videos easily.

As a field recording interface

With an onboard microphone and optional stereo mic capsules, iRig Pro Quattro I/O turns your iPhone, iPad, Android device into a full-featured, professional field recorder.

As a stand-alone mixer

iRig Pro Quattro I/O also works as a preamp and mixer: just power it via battery, USB or DC IN and use the full set of inputs/outputs to capture and mix multiple sources to your DSLR camera with professional quality.

Always perfect recordings with the safety backup channels

In STEREO and MONO mode, inputs 3 and 4 can be used as safety channels: recording the same signal as input 1 and 2 but reduced by 12dB as a backup in case the sound source unexpectedly overloads the main channels.

Audio quality without compromise... wherever you are

Up to 24-bit, 96 kHz sample rate Ultra-low-noise mic preamps with full +48v phantom power Professional-quality, transparent A/D and D/A conversion Built-in limiter, for input 1-2, to protect against clipping Multitrack, stereo or mono internal mixdown.

Specifications

Microphone Input
Microphone Input: balanced female 3-pin, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
Microphone Input Level: from 6 mVpp to 1.4 Vpp
Microphone Input Impedance: 3.2 kOhms
Gain Range: 40 dB
Phantom Power: +48V i 4V
Frequency Response: 20 Hz - 20 kHz +/-1.5dB
Input Noise: -103 dB(A), -97 dB RMS

Instrument Input
Instrument Input: unbalanced, Hi-Z, TS 1/4" Jack, Tip: signal / Shield: ground
Instrument Input Level: from 30 mVpp to 6.9 Vpp
Instrument Input Impedance: 1 MOhms
Gain Range: 27 dB
Frequency Response: 20 Hz - 20 kHz +/-1.5dB
Input Noise: -103 dB(A), -97 dB RMS
Stereo Headphone Output
Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
Headphone Level Control numbered thumbwheel
Headphone Level Power 100mW into 50 Ohms

Stereo Headphone Output
Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
Headphone Level Power 100mW into 50 Ohms

MIDI Input/Output
Connector: 2x2.5mm TS Jack
Other Input/Output
DC barrel: 1x DC barrel. For power and device charging.
Device Connector: mini-DIN

Common
Conversion: 24-bit A/D, 24-bit D/A
Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz

Power:
- USB bus powered when used with a computer
- Battery powered (2xAA included) when used with an iOS device
- DC power supply (not included, iRig PSU 3A sold separately)*

Package includes
iRig Pro I/O universal Audio-MIDI interface
Lightning to Mini-DIN connection cable with charging features (60cm/23.62")
USB-A to Mini-DIN connection cable (60cm/23.62")
USB-C to Mini-DIN connection cable (60cm/23.62")
2.5mm TRS male to MIDI female adapter (10cm / 3.9")
2 x 1.5V AA Battery
Velcro strip

Dimensions
Size: 43mm/1.69" x 127mm/5" x 37mm/1.46"
Weight: 120g/4.23oz (batteries excluded)
Read more
 2 in stock $209.31
Intellijel Tete Tetrapad Expander Module (B-STOCK)
Intellijel Tete Tetrapad Expander Module (B-STOCK) (controller/sequencer/expander synth module)
Cat: 1002284 Rel: 01 Jan 90 • View all Synth modules
 
B-STOCK: Item refurbished, repaired and in perfect working order.
Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Expander module for the Tetrapad, Intellijel's multi-dimensional performance touch controller. Adds huge functionality, allowing you to sequence parameters and create complex modulation.

Supllier notes:
Tete is the long awaited and highly anticipated expander for the Tetrapad.

Some of the key features:

Three primary modes: VOLTAGES, NOTES and COMBO.

VOLTAGES mode:

Up to 16 voltage storage locations (grid) with 8 voltages stored at each location.

You have the choice to record and playback your recall of these locations in a looper style (just play freely and spend arbitrary amount of time at any location) or as a clocked sequence (SH-101 style). Additionally you can traverse the matrix using the X and Y CV inputs to get Cartesian style sequencing.

There is also variable slew that allows you to morph/glide between the values.

NOTES mode:

You can create sequences or loops in chord, scales or keyboard mode. The isomorphic keyboard grid can vary from 4 notes to 12 notes max. There are real-time performance looping, transposition and inversion capabilities via the CV inputs and dedicated loop button. In sequencer mode each step can be a tie, rest, or gate with size 25/50/75%. Basically we have created a way to very quickly and intuitively make chord sequences that are very musical and easy to manipulate. It is difficult to summarize in words but we will be sure to create some videos to demonstrate how easy and fun this is to play with. It definitely represents something unique in the landscape of Eurorack sequencers.

COMBO mode:

In this mode you can loop record your performance on any combination of the following functions:

fader, bipolar fader, drum hit, switch or LFO. Kind of like Elektron style parameter locking but all of the motions is recorded continuously instead of just in slices. Instantly turn a simple patch into a highly animated and complex beast.

With all of the above mentioned loop recording modes you can very easily overdub since the Tetrapad detects pressure/pressing. In combo mode you can erase individual channels.

All modes allow for internal or external clocking and configurable syncing.

All of the modes have special XYZ CV modulation assignments and make use of the dedicated CV outputs.

For example, in Looper mode one of the CV outputs generates a continuous ramp that represents the position in the loop. This can be used with devices like the Planar 2 in Interpolation mode to sync the recorded patterns together no matter what tempo.
Read more
MRP:$335.53 SAVE 21%
 1 in stock $264.12
The Vinyl Collection Vol 2
The Vinyl Collection Vol 2 (11xLP + booklet in slip-case)
Cat: 194399 57181. Rel: 03 Nov 23
 
Rock
Glass Houses (LP1)
The Nylon Curtain (LP2)
An Innocent Man (LP3)
The Bridge (LP4)
Storm Front (LP5)
River Of Dreams (LP6)
Fantasies & Delusions (LP7)
Fantasies & Delusions (LP8)
Live From Long Island (LP9)
Live From Long Island (LP10)
Live From Long Island (LP11)
 in stock $227.18
Cowboy Bebop (Soundtrack)
Cowboy Bebop (Soundtrack) (11xLP box set + booklet)
Cat: VTJL 17. Rel: 21 Dec 23
 
Soundtracks
OST 1
Vitaminless
OST 2
OST Blue 3
Remixes: Music For Freelance
Knockin' On Heaven's Door Ask DNA
Knockin' On Heaven's Door OST Future Blues
Review: Undeniably one of the most prolific anime soundtracks of all time, Yoko Kanno's band SEATBELTS was formed just to record this 1998 OST for Shinichiro Watanabe's smash success 'Cowboy Bebop'. Following the adventures of the crew of Bebop, a bounty hunter ship that chases criminals and turns them into the Inter Solar System Police for reward, Kanno's zany fusion of rock, blues and jazz oozes cool. The opening track 'Tank!' has been hugely influential, informing innumerable title sequences, from 'Danganronpa' to 'JoJo's Bizarre Adventure'. Focusing, as the Japanese often do, on Americana hallmarks, there is a distinct New York slant in the horns with some Afro-Cuban percussive influences as well, most notably on 'Rush' from the first 'COWBOY BEBOP' album. This boxset serves as a comprehensive rundown of all things SEATBELTS, an 11-vinyl boxset featuring all 7 albums the band have made for the legendary franchise housed in a box with art from the show.
Read more
 in stock $293.45
Keeley Electronics Angry Orange 4-In-1 DS-1 & Civil War Big Muff Style Distortion & Fuzz Effects Pedal Keeley Electronics Angry Orange 4-In-1 DS-1 & Civil War Big Muff Style Distortion & Fuzz Effects Pedal Keeley Electronics Angry Orange 4-In-1 DS-1 & Civil War Big Muff Style Distortion & Fuzz Effects Pedal Keeley Electronics Angry Orange 4-In-1 DS-1 & Civil War Big Muff Style Distortion & Fuzz Effects Pedal Keeley Electronics Angry Orange 4-In-1 DS-1 & Civil War Big Muff Style Distortion & Fuzz Effects Pedal Keeley Electronics Angry Orange 4-In-1 DS-1 & Civil War Big Muff Style Distortion & Fuzz Effects Pedal Keeley Electronics Angry Orange 4-In-1 DS-1 & Civil War Big Muff Style Distortion & Fuzz Effects Pedal
Cat: 1005026 Rel: 12 Mar 24 • View all Effects pedals
 
4-in-1 DS-1 & Civil War Big Muff style distortion & fuzz effects pedal
Notes: Drawing on the classic Boss DS-1 and 'Civil War' Big Muff, the Angry Orange serves up two iconic flavours of distortion and fuzz, plus two hybrid modes via a combination of tone control and clipping settings.

Supplier's Notes:
4-in-1 DS-1 and Civil War Big Muff Style Distortion and Fuzz

Keeley crammed two legendary distortion and fuzz circuits into one stompbox and gave you two new sounds in the process. It's sort of like pedal-modeling except these are 100% old-school, analogue circuits and you decide which tone control or clipping section you want to rock.

Heavily saturate your guitar through either a legendary '78 Japanese Orange Distortion or a '91 Soviet Civil War Fuzz. Use the Angry Orange to make your own fuzzztortions with the hybrid modes, all with only three simple knobs.

This pedal can be True Bypass or Buffered Bypass, it only takes two seconds to switch between the modes. The Keeley Angry Orange is entirely manufactured at Keeley Electronics and is in the new aluminium enclosure.

Tone Control

The Angry Orange gives you two tone control circuits to choose from. When the Tone Switch is up and in the MF Position the tone control is a scooped sounding, passive tilt-style. If the Tone Switch is down and in the DS Position it also features a passive sounding tilt control, voiced a little differently.

Diode Clipping

Hard or Soft Clipping: The Angry Orange gives you both styles of diode clipping. Diodes are used to create hard clipping distortions or smooth overdrive sounds. If the Clipping Switch is in the DS Position it features Hard Diode Clipping which is an edgier, more aggressive tone. When the Clipping Switch is in the MF Position that uses Soft Diode Clipping, like a muffled fuzz tone.

Buffered and True Bypass

The Keeley Angry Orange allows you to quickly switch between either mode. Having a great buffer will make your rig sound strong and clear even when the pedal is off.

Buffered switching prevents the pops and clicks of true-bypass switching. If you want to turn on true bypass, simply press and hold the foot switch for two seconds. Holding the switch for two seconds toggle between modes. True Bypass is great if a buffer might affect the tone of a vintage pedal. Enjoy truly silent switching and a better sounding rig with Keeley's buffered switching mode.

Made In The USA

Keeley design, engineer, and manufacture the Keeley Angry Orange in Oklahoma City. Everything about the Super Rodent is geared towards the professional musician and their quest for an inspiring tone when the performance demands it. From the inside of the pedal and its meticulously built circuit boards and metal construction audio jacks to the outside of the effect its newly fabricated aluminium enclosure; Keeley make guitar effect pedals to be finely crafted musical instruments.
Read more
 1 in stock $226.15
Keeley Electronics Blues Disorder 4-In-1 Blues Breaker & OCD Style Overdrive & Distortion Effects Pedal Keeley Electronics Blues Disorder 4-In-1 Blues Breaker & OCD Style Overdrive & Distortion Effects Pedal Keeley Electronics Blues Disorder 4-In-1 Blues Breaker & OCD Style Overdrive & Distortion Effects Pedal Keeley Electronics Blues Disorder 4-In-1 Blues Breaker & OCD Style Overdrive & Distortion Effects Pedal Keeley Electronics Blues Disorder 4-In-1 Blues Breaker & OCD Style Overdrive & Distortion Effects Pedal Keeley Electronics Blues Disorder 4-In-1 Blues Breaker & OCD Style Overdrive & Distortion Effects Pedal Keeley Electronics Blues Disorder 4-In-1 Blues Breaker & OCD Style Overdrive & Distortion Effects Pedal
Cat: 1005027 Rel: 12 Mar 24 • View all Effects pedals
 
4-in-1 Blues Breaker & OCD style overdrive & distortion effects pedal
Notes: 4-in-1 Blues Breaker and OCD Style Overdrive and Distortion

Keeley combines two completely different overdrive and distortion circuits to create four different drives in one box. The Blues Disorder has two switches that allow you to separate the tone control from the clipping section.

By mixing and matching the Tone and Drive switches you get two hybrid sounds. With both switches up it's a smooth, soft-clipping Bluesy Breaker. The BB side is a low gain, soft-clipping overdrive. With both switches down it's a fuller sounding, hard-clipping OC Distortion. The clever design keeps the pedal a three knob overdrive with 4 unique sounds.

Switch easily between buffered or true-bypass; whichever sounds best in your rig. The Keeley Blues Disorder Overdrive and Distortion is designed and manufactured entirely by Keeley Electronics in a brand new aluminium enclosure.

Switchable Tone Stacks - Swap Voicings

The Blues Disorder gives you two tone control circuits to choose from. When the Tone Switch is down and in the OC position you will hear an active midrange boost and then the tone control rolls off high-frequency. If the Tone Switch is up and in the BB position you don't have the active mid boost, there's just a simple high-frequency filter and therefore a more transparent sounding overdrive and response.

Switchable Diodes - Hybrid Gain Clipping

The Blues Disorder gives you both styles of diode clipping. Where diodes are placed in the circuit, can have a dramatic effect on gain and compression. This pedal gives you both hard clipping distortion or soft clipping overdrive, depending on the position of the Drive Toggle.

If the Clipping Switch is in the OC position it features Hard-Clipping which is an edgier, more aggressive tone. Alternatively, when the Clipping Switch is in the BB Position, that uses Soft-Clipping and sounds like a softly overdriven tube amplifier.

Buffered and True Bypass

The Keeley Blues Disorder allows you to quickly switch between either mode. Having a great buffer will make your rig sound strong and clear even when the pedal is off.

Buffered switching prevents the pops and clicks of true-bypass switching. If you want to turn on true bypass, simply press and hold the foot switch for two seconds. Holding the switch for two seconds toggle between modes. True Bypass is great if a buffer might affect the tone of a vintage pedal.

Enjoy truly silent switching and a better sounding rig with Keeley's buffered switching mode.

Made In The USA

Keeley design, engineer, and manufacture the Keeley Blues Disorder in Oklahoma City. The Blues Disorder is geared towards the professional musician's demand for an inspiring tone when performance demands it. From the meticulously built electronic circuit boards to the in-house fabricated aluminium enclosure, Keeley pedals are professional grade. Keeley make guitar effect pedals to be finely crafted musical instruments.
Read more
 1 in stock $226.15
Artikel 1 bis 50 von 102 auf Seite 1 von 3 anzeigen
1  2  3  »
Cart subtotal: