100% Sicheres Einkaufen

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Sicheres Einkaufen

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

View:
Options
Artikel 1 bis 50 von 791 auf Seite 1 von 16 anzeigen
1  2  3  ...  16  »
Cat: 471425 Rel: 30 Oct 12
 
Eurorack module extension for the Mono Lancet
Notes: The Vermona Mono Lancet Modular Dock is a eurorack module extension for the Mono Lancet.

The Mono Lancet Modular Dock from Vermona connects to the Vermona Mono Lancet via D-sub to extend its possibilities by adding pulse-width modulation, and frequency modulation, and interaction with other synth modules for the creation of incredible new soundscapes.
Read more
 1 in stock $134.93
Click for better price!
quote 471425
Cat: 553603 Rel: 19 Nov 14
 
Quad multimode filter synth module
Notes: In our project Orage Magnetique to recreate a sound spaciolab to recreate sounds from space , this quad multimode filter has been designed to simulate the action of magnetic fluctuations on the sound landscape. The effecs of ionisation variations are modified by the different filters cutoff frequencies and the way they are synced. The module Fluctuations magnetiques (magnetic fluctuation) is a module from the modular synthesizer Orage Magnetique. This quad mutimode filter combines 4 independent multi-mode filters with selectable low-pass, band-pass & hi-pass. Each filter can be synced to one another to build to a 48dB low-pass/hi-pass filter or 24dB band-pass. Each filter has an modulation input and an individual output to create stereo effects a well as quadriphonic textures. The filters A & B and C & D can be used in parallel mode or serial mode.
Read more
 2 in stock $194.28
Click for better price!
quote 553603
Cat: 553606 Rel: 19 Nov 14
 
Voltage controlled amplifier synth module
Notes: GERMANIA 241 is a germanium transistor voltage controlled amplifier simulating the crossing of the belt of asteroids Germania 241. The germanium transistor will add this particular distorted sound made by the speed of asteroids.

Germanium transistors stocks are limited and may have different origins. Note that this module is a limited edition and that the sound can differ from one module to to another.

signal 0>10: input level
gain 0>10: minimum output level
mod2: amount of gain modulation of mod2 input
Read more
 1 in stock $113.33
Click for better price!
quote 553606
Cat: 553610 Rel: 19 Nov 14
 
Attenuation inversion & offset adjustment synth module
Notes: In our projet Orage Magnetique dedicated to the design of a sound spaciolab to recreate sounds from space, the module POLES enables to adapt the signal from magnetic polarisation to get the best sound simulation with dual amplification, attenuation, inversion and offset adjustment.

The module POLES offers 2 separate channels.

POLES enables to attenuate, invert & amplify a signal. It is very useful to adapt different signals to different inputs. It also enables to adjust the offset of your signal if you want to adapt it to +/- 5V or 0/+5 for example. If nothing is connected to the input, it will act as a fixed voltage source.
Read more
 1 in stock $56.12
Cat: 553616 Rel: 19 Nov 14
 
Audio mixer synth module
Notes: Very small 6 to 1 input audio mixer with linear Pots
Read more
 1 in stock $74.47
Click for better price!
quote 553616
Cat: 553623 Rel: 19 Nov 14
 
Discrete oscillator synth module
Notes: TITAN modules are elements from the Titan Capsule. They are sound generators built to recreate the sound of Titan haze. These transistors made oscillators have a wide range and a very particular sound. 2 TITAN modules will create deep and vibrant basses.

With the knob « densite des brumes », the sound will be shaped through Titan's haze from deep basses to high pitches. The titan transistors generate a very particular sound with a base frequency of +/-15 semi-tones from 1Hz a 6kHz.

Switch -2>0 : multiplies the density of the haze by -2. This will have a direct impact on the sound and make it 2 octaves lower.

Mod2 0>10 is the amount of frequency modulation of mod2 input
Read more
 1 in stock $93.90
Cat: 557456 Rel: 19 Dec 14
 
Reverb synth module with size ranges from "coffin" to "the heavens"
Notes: The Erbe-Verb is more than a collection of reverb algorithms or presets, it is a unique, modeless, continuously variable reverb algorithm with complete voltage control.

Typical reverb types such as plate, room, hall, shimmer and others may be programmed by adjusting the knobs. The continuously variable algorithm allows for hybrid and unreal spaces to be found.

Traveling between spaces is possible by modulating the algorithm or manually sweeping parameters. More than an end-of-chain effects unit, it's a whole new building block for modular synthesis. Like the Echophon, it's coded by Tom Erbe of soundhack.
Read more
 2 in stock $476.02
Cat: 557477 Rel: 19 Dec 14
 
Compact analog computer module specifically designed for musical purposes
Notes: FUNCTION is part of the MATHS family of control voltage utility modules.

It is a small analog computer designed for solely musical purposes.
Read more
 2 in stock $143.56
Cat: 557504 Rel: 19 Dec 14
 
Output interfacing synth module with the added functionalities of FX Loop
Notes: Rosie is an output interfacing module with the added functionalities of FX Loop, Crossfader and Auto-Cue system.

It is designed to facilitate live performance on the modular synthesizer by allowing the artist to preview and modify portions of a patch using the Auto-CUE system, while the audience is listening to a different portion of the patch as selected by the crossfader.

Additionally it allows for Stereo processing of all sounds via the FX Loop. The Rosie is suitable for headphone monitoring of the modular system and interfacing the modular system to a recording environment. Internal Level Matching and Limiting w/ overload indication makes it easy to connect the modular system in the studio or on stage.
Read more
 1 in stock $138.17
Cat: 557509 Rel: 19 Dec 14
 
Clocked sequential binary event machine module
Notes: BRAINS is a clocked sequential binary event machine. It is designed to be connected to one or two Pressure Points to form a 4 or 8-Step 3-channel analog sequencer. Classic synthesis control!
Read more
 1 in stock $116.58
Cat: 557491 Rel: 19 Dec 14
 
Two channel low pass gate synth module
Notes: A two channel Low Pass Gate, providing simultaneous voltage control over amplitude and frequency content of a signal. It is in essence, a Voltage Controlled Filter Amplifier (VCFA) that has an extremely organic response to control signals. The Low Pass Gate is a classic West Coast synthesis circuit.

Revision 2 adds audio side-chain compression and expands CV generation and processing capabilities.
Read more
 2 in stock $200.76
Cat: 746304 Rel: 19 Dec 14
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Rosie is an output interfacing module with the added functionalities of FX Loop, Crossfader and Auto-Cue system.

It is designed to facilitate live performance on the modular synthesizer by allowing the artist to preview and modify portions of a patch using the Auto-CUE system, while the audience is listening to a different portion of the patch as selected by the crossfader.

Additionally it allows for Stereo processing of all sounds via the FX Loop. The Rosie is suitable for headphone monitoring of the modular system and interfacing the modular system to a recording environment. Internal Level Matching and Limiting w/ overload indication makes it easy to connect the modular system in the studio or on stage.
Read more
 1 in stock $132.94
Cat: 557488 Rel: 19 Dec 14
 
Analog computer synth module designed for musical purposes
Notes: MATHS is an analog computer designed for musical purposes. Amongst other things, it will allow you to:

- Generate a variety of linear, logarithmic, or exponential triggered or continuous functions
- Integrate an incoming signal
- With no signal applied, generate a variety of linear, logarithmic, or exponential functions
- Add, subtract and OR up to 4 signals
- Generate analog signals from digital information (Gate / Clock)
- Generate digital information (Gate / Clock) from analog signals
- Delay digital (Gate / Clock) information
Read more
 5 in stock $284.96
Cat: 557490 Rel: 19 Dec 14
 
Synth module to be used for ring modulation, VCA, mixer, signal multiplication, voltage controlled polarization, attenuation and more
Notes: The modDemix features 2 identical direct-coupled balanced modulator circuits that may be used together or independently for Ring Modulation, VCA, Mixer, Signal Multiplication, Voltage Controlled Polarization, Attenuation and more.
Read more
 3 in stock $133.84
Cat: 557453 Rel: 19 Dec 14
 
Compact voltage controlled oscillator (VCO) module specifically designed for generating SINE waves
Notes: A compact Voltage Controlled Oscillator designed for generating SINE waves, Variable wave-SHAPEs, SUB-Octaves, Oscillator SYNC and Linear FM in the analog domain.

The Sub-Timbral Oscillator is the more subtle and melodic friend to the DPO's complex harmonic lattice.
Read more
 1 in stock $192.13
Cat: 557458 Rel: 19 Dec 14
 
Dual voltage controlled oscillator (VCO) for generating complex waveforms
Notes: A dual Voltage Controlled Oscillator designed for generating complex waveforms.

Expanding on the classic arrangement of Primary and Modulator Oscillators, the DPO has both of the VCOs operable as complex signal sources. It is in essence a Dual Primary Oscillator.
Read more
 2 in stock $591.51
Cat: 751438 Rel: 10 Mar 15
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Cylonix and Intellijel have collaborated to bring you a very sophisticated and deeply complex Wavetable VCO. At the core of this module is very powerful FPGA board that he has pushed to the absolute max of its capabilities and crammed full of features. We wanted to create a module that really worked well in the modular context so there are a lot of modulation and control possibilities.

CHORDS
Oscillator 1 can be operated in a CHORD mode, which runs 8 copies of the oscillator in parallel with adjustable detuning, leading to very fat, rich waveforms. The oscillators have extensive modulation capabilities including audio rate (98KHz) Frequency and Phase Modulation (FM and PM) via external sources. Nonlinear combination processes allow the outputs of the two oscillators to interact to generate complex timbres and sonic textures.
There are 64 user selectable chords.

WAVEFOLDER
The SHAPESHIFTER module also includes the analog wave folder circuitry from
module to add analog warmth and metallic rasps to the digital oscillator output.
External signals can also be patched in.

PRESETS
The module includes a sophisticated preset mode where panel settings can be stored. There are 12 user-programmable preset slots and another 52 volatile slots that can be used as a scratchpad. These scratchpad slots are initialized to interesting presets on module powerup. The capabilities of the preset mode is not limited to mere passive storage of settings, however. In this mode the user can also step through, or sequence, the settings, either in order or randomly in response to pulses input to the external sync input. This gives the user the ability to generate complex sequences of sounds. The preset mode also allows the user to morph between the current panel settings and a preset providing a very powerful real-time performance tool.

SYNC
8 Different sync modes: HARD, SOFT, REV, HOLD, BUMP, 2=1, 1=2, OFF
with the ability to internally sync to a sub oscillator

PULSE
User selectable modes for the PULSE output: OR, AND, XOR, GLCH, +OSC1, EOC, +OSC2, -OSC2

MOD A modes: (audio rate modulation)
COMBO IN, SHAPE IN, PHASEMOD, VOCODER

MOD B options (all with CV control)

-Combo modes for OSC1 and OSC2:
NORMAL, RING, MIN, PONG, INLV, AND, XOR, GLCH
-Waveform TILT
-Chord mode overdrive
-Delay depth and FB
-Percussive mode decay time
Read more
 1 in stock $508.10
Cat: 563563 Rel: 10 Mar 15
 
Buffered multiple synth module, 2HP wide
Notes: Dual 1 x 3 buffered mult (one audio or cv signal in with multiple buffered outputs).

The output of the first mult is normalled to the input of the second mult to create a 1×6 buffered mult
Read more
 More than 10 in stock $69.62
Click for better price!
quote 563563
Cat: 563566 Rel: 10 Mar 15
 
Dual complex morphable wavetable VCO eurorack synth module
Notes: Cylonix and Intellijel have collaborated to bring you a very sophisticated and deeply complex Wavetable VCO. At the core of this module is very powerful FPGA board that he has pushed to the absolute max of its capabilities and crammed full of features. We wanted to create a module that really worked well in the modular context so there are a lot of modulation and control possibilities.

CHORDS
Oscillator 1 can be operated in a CHORD mode, which runs 8 copies of the oscillator in parallel with adjustable detuning, leading to very fat, rich waveforms. The oscillators have extensive modulation capabilities including audio rate (98KHz) Frequency and Phase Modulation (FM and PM) via external sources. Nonlinear combination processes allow the outputs of the two oscillators to interact to generate complex timbres and sonic textures.
There are 64 user selectable chords.

WAVEFOLDER
The SHAPESHIFTER module also includes the analog wave folder circuitry from
module to add analog warmth and metallic rasps to the digital oscillator output.
External signals can also be patched in.

PRESETS
The module includes a sophisticated preset mode where panel settings can be stored. There are 12 user-programmable preset slots and another 52 volatile slots that can be used as a scratchpad. These scratchpad slots are initialized to interesting presets on module powerup. The capabilities of the preset mode is not limited to mere passive storage of settings, however. In this mode the user can also step through, or sequence, the settings, either in order or randomly in response to pulses input to the external sync input. This gives the user the ability to generate complex sequences of sounds. The preset mode also allows the user to morph between the current panel settings and a preset providing a very powerful real-time performance tool.

SYNC
8 Different sync modes: HARD, SOFT, REV, HOLD, BUMP, 2=1, 1=2, OFF
with the ability to internally sync to a sub oscillator

PULSE
User selectable modes for the PULSE output: OR, AND, XOR, GLCH, +OSC1, EOC, +OSC2, -OSC2

MOD A modes: (audio rate modulation)
COMBO IN, SHAPE IN, PHASEMOD, VOCODER

MOD B options (all with CV control)

-Combo modes for OSC1 and OSC2:
NORMAL, RING, MIN, PONG, INLV, AND, XOR, GLCH
-Waveform TILT
-Chord mode overdrive
-Delay depth and FB
-Percussive mode decay time
Read more
 1 in stock $526.76
Cat: 563579 Rel: 10 Mar 15
 
Dual slider based ADSR envelope synth module, 14HP wide
Notes: The circuit is based in part on the Roland SH-101 / System100m design with several enhancements.
Read more
 3 in stock $213.71
Cat: 563665 Rel: 11 Mar 15
 
Passive multiple synth module, 2HP wide
Notes: Dual 4-way passive mult (one audio or cv signal in with multiple unbuffered outputs)

On the back of the pcb is a pair of solder points marked as "link". You can connect these (with a solder blob or small jumper wire) to turn the mult into a single 8 channel Mult instead of 2 x 4 channel.
Read more
 5 in stock $31.84
Cat: 563706 Rel: 10 Mar 15
 
Wavefolder/waveshaper synth module with cv input and dedicated attenuator
Notes: The uFold is a collaborated design with David G. Dixon.

This is the version II of the original uFold.

We looked very closely at how some of the most loved timbre shaping circuits worked in classic synth modules; Not just in how they were implemented electronically but how they sounded and how efficient they were to get great sounds. it was important that their design was very versatile in range of timbres but still easy to use and with well thought out control ranges.

When combining the Dixie, uVCA, uFade and uFold you can achieve extremely complex palette of sounds with just a few modules!
Read more
 1 in stock $155.44
Cat: 563716 Rel: 10 Mar 15
 
Voltage controlled filter synth module with low pass (LPF) 2-pole, high pass (HPF) 2-pole and bandpass outputs (BPF) 1-pole
Notes: Introducing the uVCF state variable filter.

This is another great David Dixon filter design that has been on the workbench for a while. It is a very clean and precise filter that also doubles as an excellent sine VCO.

It responds very well to FM and the small size should make it a nice choice for smaller systems/lunchboxes.
Read more
 2 in stock $154.35
Cat: 739114
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


The uFold is a collaborated design with David G. Dixon.

This is the version II of the original uFold.

We looked very closely at how some of the most loved timbre shaping circuits worked in classic synth modules; Not just in how they were implemented electronically but how they sounded and how efficient they were to get great sounds. it was important that their design was very versatile in range of timbres but still easy to use and with well thought out control ranges.

When combining the Dixie, uVCA, uFade and uFold you can achieve extremely complex palette of sounds with just a few modules!
Read more
 1 in stock $134.06
Cat: 569591 Rel: 10 Apr 15
 
Multiples and mixing utilities synth module, 4HP size
Notes: Links provides 3 utility functions focused on signal distribution and mixing.

1:3 is a 3-output buffered multiple, with an offset error < 0.1%. It is useful for distributing the voltage from a CV output with a large protection resistor to several modules - particularly VCOs.

2:2 is a 2-input summer with unity gains. The sum of the two input channels is distributed to 2 outputs.

3:1 is a 3-input mixer with a gain of 1/3 for each channel (averager). It is particularly suitable for rapidly mixing audio sources such as oscillators, for which a unity gain mixer would have caused clipping.

A 2-color output monitoring LED is available for each of these functions.
Read more
 5 in stock $58.28
Cat: 569592 Rel: 10 Apr 15
 
Mixer, offset, attenuverter synth module with 3 channels of audio/CV processing, 6HP size
Notes: Shades provides 3 channels of audio/CV processing which can be configured either as active attenuators or as attenuverters.

A bicolor LED monitors the polarity and intensity of the audio or CV signal on each output.

Unconnected inputs are normalized to an internal precision voltage reference, which can produce either a +5V or +10V constant voltage.

Normalization on the outputs allows the module to be used as a mixer or offset generator: when no jack is inserted in an output, the signal from this output is summed into the next output. Combined with the internal voltage reference, this allows the module to be used as a CV offset control.

Patch examples:

Mixing:
When output 1 is left unconnected, the signal on output 2 is the sum of channels 1 and 2. Channel 3 can be used for another purpose (attenuation, attenuversion, or constant CV generation).

When output 1 and 2 are left unconnected, the signal on output 3 is the sum of channels 1, 2 and 3.

Offset generation:
Leave channel 1's input and output unconnected, and connect a CV source to channel 2's input. Channel 2's output will contain a scaled and offset copy of the input CV. Channel 1's level knob will control the offset and channel 2's level knob will control the signal scale and polarity.
Read more
 1 in stock $89.58
Cat: 569587 Rel: 10 Apr 15
 
Dual Bernoulli gate synth module, 6HP size
Notes: A Bernoulli gate takes a logic signal (trigger or gate) as an input, and routes it to either of its two outputs according to a random coin toss. The knob controls how fair the coin toss is - with the knob in minimal position, the first output always win, with the knob in maximal position the second output always wins - with random fun in-between. And obviously, this bias is CV-controllable!

Branches packs two such gates in a small 6-HP panel. Get a sequencer to randomly skip steps, randomize drum patterns, dispatch events from a sequence to two subpatches, or patch a monster modular Pachinko machine...

Input specifications: 100k impedance, 0.6V threshold.
Output specifications: 5V HIGH level.
Response time: 15us.
6-HP.
Current consumption: +12V: 10mA, -12V: 1mA.
Read more
 2 in stock $94.98
Cat: 569586 Rel: 30 Jun 15
 
MIDI interface and MIDI event processor Eurorack synth module with 4 CV outputs and 4 trigger/gate outputs - 12HP size
Notes: Yarns is a MIDI interface providing up to 4 channels of CV/Gate conversion, and providing some of the MIDI message processing features of Mutable Instruments' MIDIpal, including arpeggiator, euclidean sequencer, and a SH-101 inspired step sequencer.

Yarns provides 4 CV outputs and 4 Gate/trigger outputs, which can be assigned to up to 4 voices. In single voice mode, note, velocity, modulation and aftertouch (or other CC) CV are produced, along with a gate, a trigger, and a clock/reset output. In two voices mode, two channel of note, modulation or aftertouch CV are produced, along with two gates, and clock/reset outputs. Finally, in four voices mode, four pairs of CV/Gate outputs are provided.

The 2 and 4-voice modes are available both in a "polyphonic" and "multitimbral" flavour. The former receives chords from one single MIDI channel and dispatches them to the voices; while the later provides independent monophonic parts - which can be addressed to different MIDI channels, keyboard ranges, or even velocity levels. Various note priority modes (low, high, last) and polyphonic allocation schemes (voice-stealing, random, cyclic) allows you to fine-tune the CV/Gate conversion to your playing style. Each voice has a built-in digital LFO to interpret modulation wheel messages as a vibrato; can respond to pitch-bend messages; or can be smoothed with a glide/portamento control - no need for a dedicated module and patches to get the right response from a MIDI keyboard!

Each part can generate sequences either through an arpeggiator/euclidean sequencer combo; or with a SH-101 style sequencer with step-by-step recording, storing up to 64 notes. The module can sync to an external MIDI clock, and generate a clock/reset output at any subdivisions of the MIDI clock.

Other unique features include support for microtunings (either through standard MIDI messages or from a selection of historical tunings or indian ragas), just intonation, and an audio output mode which can transform one, two, or four of the CV outputs into simple digital oscillators.
Read more
 2 in stock $267.68
Cat: 569585 Rel: 30 Jun 15
 
Tidal modulator signal generator Eurorack synth module - 14HP wide
Notes: Tides is all about waves that go up and down, from minute-long cycles to audio rates... This module is Mutable Instruments' unique take on the looping AD envelope generator - pushing this well-known trope to unknown territories.

The core of the module is a digital asymmetric triangle function generator, which can be used in AD and AR modes (for envelope generation), or looping (as a VC-LFO or VC-DO). The triangle generator is followed by a wavetable waveshaper providing linear, exponential, logarithmic, sinusoidal, or arc-sinusoidal shapes for the A and D segments. Then, a second processor applies either a 2-pole low-pass filter to the waveform, smoothing its sharp edges; or a rubbery wavefolder, adding kinks and "bounces" to the waveform. Because Tides has been designed from the ground up to work at audio rates with minimal aliasing, and because all its parameters are under voltage control, it can be used as a unique self-contained synth voice.

Tides' advanced features include:

- Output level CV input (digital VCA).
- Dual outputs: standard unipolar waveform, and "double-shot" waveform with a positive spike during the ascent and a negative spike during the descent. At audio rate, both of them have a different sound.
- Accurate V/Oct tracking with straightforward calibration procedure.
- Freeze input to temporarily hold the waveform.
- Clock input to lock onto a multiple or fraction of a trigger sequence... or audio signal, PLL-style.

*For audio demos, please visit - http://mutable-instruments.net/modules/tides/demos
Read more
 8 in stock $177.01
Cat: 569583 Rel: 30 Jun 15
 
Dual analog VCA and 2-pole VCF, with digital control path - 12HP size
Notes: Streams provides two channels of extremely flexible signal dynamics manipulation.

Each channel consists of an analog voltage-controlled filter and amplifier (VCFA). The response curve of the amplifier section is continuously variable from exponential to linear. The amplifier gain is directly controllable from a CV input, through an attenuator. But what makes Streams truly unique is the multi-purpose EXCITE input. The signal routed to this input is analyzed by a micro-controller and translated into internal control voltages for the VCFA, turning Streams into a very versatile signal contouring tool:

Envelope generator
The EXCITE input can work as a trigger input, triggering an internal AD or AR envelope routed to the gain and the filter cutoff (in variable amount). With only 6-HP of space, you can shape an oscillator or noise source into a full-bodied sound.

Vactrol curve generator
The EXCITE input is processed by a digital model of a resistive opto-isolator (Vactrol), controlling the gain and the filter cutoff (in variable amount). The digital emulation allows the modification of properties of opto-isolators - such as response time - which are otherwise difficult to control. The virtual vactrol response can be either optimized for processing CVs, or triggers (for "plucked" sounds).

Amplitude and frequency content follower
The envelope and cutoff of the EXCITE signal is measured, and applied to the signal on the VCFA input.

Compressor/limiter
Streams' VCF is disabled, and the VCA is used to control the dynamics of the input signal. An intuitive control scheme allows the compressor to be used either for peak reduction/limiting operation; or for boosting signal levels with soft-limiting. The EXCITE input can be used as a sidechain.
Read more
 2 in stock $192.13
Cat: 569524 Rel: 30 Jun 15
 
Modal synthesis voice module comprising a noisy and impulsive excitation signal generator, and 64-partial modal resonator
Notes: Elements is a full-blown synthesis voice based on modal synthesis - an under-appreciated flavour of physical modelling synthesis with a strange and abstract feel.

Elements combines an exciter synthesis section generating raw, noisy sounds characteristic of bowing (filtered friction noise), blowing (pitch-controlled granular noise), or striking (stick, mallet, hammer or brush sample playback... or bursts of synthetic impulsions). These sources, or external audio signals, are processed by a modal filter bank - an ensemble of 64 tuned band-pass filters simulating the response of various resonant structures (plates, strings, tubes...) with adjustable brightness and damping. A stereo ambience reverberator adds depth and presence to the sound.

All parameters have a very meaningful and well-delimited impact on the sound. When designing Elements, great care has been taken in selecting parameter ranges and control curves, producing a large palette of sounds - often beyond physical realism - but always well controlled and stable. The "dark spots" of noise and feedback are reached gradually, and they do still react to controls. The module is deliberately menu- and switch-free - what you dial/patch is what you hear!

*For audio demos, please visit - http://mutable-instruments.net/modules/elements/demos
Read more
 3 in stock $461.98
Cat: 580269 Rel: 30 Jul 15
 
Geiger Counter synth module - 10HP wide
Notes: The WMD Geiger Counter is now available in the popular Eurorack Modular format and has voltage control of many features.

The Controls - The Geiger Counter may seem overwhelming, but once broken down, the controls are quite logical.

Gain - Low settings provide clean tones with no distortion at all, while high settings will brickwall your signal for great sustain. Use the Gain control as a coarse setting for getting the desired tone from the selected wave table.

Tone - The Geiger Counter's tone control blends muffled low-mids with chimey and clear upper mids and highs providing a very large range of sounds in junction with the Gain. All the way down and the sound is muffled and grungy with little upper harmonic content. The middle range is smooth and full bodied. The top range cuts the lows completely for only upper harmonic content. Use the Tone to fine tune the sound of the wave table.

Tone Enable/Disable - This switch removes the tone control from the preamp circuit. The tone control sucks some volume from the gain, and this allows the pure ultra hot signal to go directly into the Wave Table. If a very clean tone is desired, set to Disable and adjust the gain to get the right amount of breakup. For most wave tables, disabling the Tone will produce completely different sounds by brickwalling to the extremes of the tables faster.

Direct In/Level - The direct input allows a signal to be injected directly to the Geiger Counter's digital heart and bypassing the preamps coloration.

Sample Rate - Controls the length of the samples your signal is converted into. Full up and the Geiger Counter samples faster than a CD. Dial it down a little and you'll lower the fidelity and frequency response, adding overtones and difference frequencies. Down a little produces some very nice chimey clean tones. Down more and higher notes disappear into difference frequencies, all the way down to 280Hz. The sample rate is sort of like a flange whammy.

When the LED is Red, the Sample Rate is in fine mode where the range is limited to the upper end.

The CV input and attenuator are only active when a cable is plugged into the CV jack. When CV controlled, the Sample Rate knob selects the center frequency about which the CV signal moves. When the LED is Green, the Sample Rate knob is logically ANDed with the CV signal, producing some interesting sounds as the CV changes.

Bit Depth - This controls the finer details of the signal. All up and your signal is represented by the full 8 bits. Each step down cuts the resolution in half, adding quantization error distortion, all the way down to 1 bit making a nasty square wave from a once clean tone. This produces a lo-fi gated distortion sound.

The LED when Green engages Mask mode where your signal is logically ANDed to the 8 bit number produced by the Bit Depth knob. This produces uneven gaps in your signal for some interesting distortion sounds.

The Bit Depth CV and level control is only active when a cable is plugged into the Bit Depth CV input. The Bit Depth knob then controls the center frequency. However, unlike the Sample Rate control, the bit depth can wrap around the edges of the control if the CV signal is larger than the range allows for.

Wave Table - This knob and display select the wave table to run your signal through. The wave table stage takes your signal and destroys it with math. This produces some incredible sounds. The wave tables are organized so that a more extreme version is typically found one up from the current one. There are 252 wave tables in all, each with different harmonic content.

The display is in HEX, displaying the numbers 0-9 and the letters A-F. Don't be alarmed, it actually makes remembering your desired wave table easier! The wave table is remembered when the pedal is turned off.

The Wave Table CV input is similar to the Bit Depth's. The CV signal is only active when a cable is plugged in. The Wave Table will wrap around the end points 00 and FB. The center is set by the WaveTable knob.
Read more
 1 in stock $256.90
WMD Pro Output Module (synth module)
Cat: 580282 Rel: 30 Jul 15
 
Pro Output synth module with Low Distortion / Low Noise & High Headroom - 6HP wide
Notes: The WMD Pro Output is a simple and purpose built module to get your modular signal interfaced with professional and consumer audio gear. It also includes a very high quality headphone driver.

Rail to rail opamps at the input stage allow for headroom above the typical eurorack levels of 20Vpp. The Pro Output can handle 23Vpp before clipping. Signals are attenuated down to the proper levels allowing for simple adjustment free connection to any type of device, professional or consumer.

The Pro Output is DC coupled through the entire signal path, including the headphone driver. This design eliminates coupling capacitors and the distortion they can cause.

Controls and I/O:

Input - The inputs are designed to accept any normal modular level. 10Vpp is the nominal operation level. The left input is normaled to the right side for mono operation. Inputs will clip at 23Vpp, giving enough headroom for any eurorack signal.

Phones/Line - The headphone driver connects to a 3.5mm stereo jack, and a 1/4" jack for whatever type of headphones you use. It can drive both simultaneously.

The headphone output level is internally limited to protect against accidental knob turns. Connect a couple of jumpers to the rear of the module to disable this limiting. This will allow the headphone amp to drive headphones extremely loudly, but still without distortion. Output quality remains the same regardless of the jumper settings.

With the limiting enabled (jumpers off), the maximum output is around -10dBV. With limiting disabled (jumpers on), the maximum output increases to pro level, about +4dBu.

Stereo - The Stereo (-10dBV) output is designed to interface directly with consumer level gear. Hook directly to sound cards, portable recorders, and speakers. It can be used as a second headphone output but will be loud.

+4dBu Bal - These two outputs (left and right) are high quality low impedance balanced line drivers. They are designed to drive long cables and to drive balanced transformer or transformerless inputs. Use these to connect directly to mixing consoles, mic preamps, or any other piece of professional outboard gear.
Read more
 1 in stock $201.84
Click for better price!
quote 580282
Cat: 580286 Rel: 29 Jul 15
 
Synth module unit for extended functionality of the SSM module
Notes: The SSM Expand 8 HP module provides extended functionality of the SSM.

Gate/Trig: Gate (Green LED lit) provides 10V outputs for each routing button. It mirrors the routing shown by the SSM LEDs. Trig mode (Red LED lit) will output a trigger when a step (CV, Step/Gate or Reset) is taken. Pushing a routing button will not change the output thus providing synchronized triggers.

Trigger Length: CV and knob provide adjustable trigger length.

Retrig on Step: When on, gates and triggers will retrigger quickly when a step is taken.

Invert Behavior: When on, routings that are OFF will produce ON triggers or Gates.

DAC3/4: Two 4 bit DAC outputs that output a weighted 4 bit voltage between 0 and 5 volts. From routing columns 3 and 4.

Step: Outputs a trigger for each step, reset or CV change that is made to the SSM.

Installation: Connect the 20 pin ribbon cable to the GTExp header on the SSM, and the ToSSM connector on the Expand. Red Stripe Down.

Specs: 8 HP. 25mm Depth. 10V Gate Outputs. Current consumption is +40mA, -3mA. 12 month warranty.
Read more
 1 in stock $148.95
Click for better price!
quote 580286
Cat: 580271 Rel: 03 Aug 15
 
Invert offset synth module for modifying control voltages for other modules
Notes: The 6 HP Invert Offset module creates an easy way to modify control voltages for other modules in your system.

The Invert Offset consists of two identical channels. Signal applied to the In jack is vertically offset by the knob, additionally a CV signal may be applied to offset the signal vertically.

The +Out jack puts out a non-inverted signal with the specified offset. The -Out jack puts out an inverted signal with the same offset as the +Out.

The Offset CV input allows you to mix two signals together, Offset will never be inverted, while the signal at the In jack will be inverted based on the selected output.

There is also a sum output (1+2) that takes the non-inverted outputs and adds them together. Also there is a comparator gate output that is on if the channel 1 output is more positive than channel 2.
Read more
 1 in stock $89.58
Click for better price!
quote 580271
Cat: 579172 Rel: 07 Aug 15
 
Dual voltage controlled oscillator (VCO) synth module - 30HP
Notes: The Furthrrrr Generator has a main oscillator (carrier) with an extensive and fully voltage controllable wave multiplier and a modulation oscillator (modulator) that can cross-modulate the carrier. Each oscillator has hard and soft sync and also features an integrated tuner: if both LEDs are lit the VCO is at note A. Left LED is lit at note Ab and right LED at A#. Frequency potentiometers are ten-turn models and thus allow for easy tuning. Frequency range of the VCOs is 10Hz-10kHz (and much lower in modulator's LFO mode). Both VCOs feature 2 frequency CV inputs (1x with bipolar attenuator, 1x with 1V/octave), one FM input (jumper selectable between linear and exponential FM) as well as separate input for hard and soft sync. The voltage characteristic can be selected between 1V/octave and 1.2V/octave (Buchla norm).

The main oscillator (carrier) outputs the waveforms sine, saw, square and white noise. The two outputs marked with the magic eye are outputs of the "harmonic section" that generates very complex sounds by the wave multiplier and its parameters symmetry, order and Furthrrrr in the module's right-hand section. Symmetry lowers the level of even harmonics and amplifies the odd harmonics (this affects the pulse wave's width as well). Order adds saturation to the high order harmonics and resembles a low pass filter. Furthrrrr alters the level of harmonics set by the other parameters and produces very interesting, partly brute sounds with lots of harmonics by clipping and folding the wave. All three parameters can be voltage controlled. The carrier oscillator also has inputs for hard and soft sync, the sync-switch can synch directly to the modulator.

The modulation oscillator (modulator) has three wave forms with direct outputs: sine, saw and square. Using the internal modulation via the "mood section" the waveform is selected with a button; an additional staircase wave form is available here, but it can be overridden by inserting a signal into the external input socket. A switch activates the LFO mode.

The Mood section is responsible for the internal modulation of the carrier by the modulator. Switches determine the modulation destination(s) that can be activated simultaneously. These are the Furthrrrr parameter of the harmonic section, the amplitude and the frequency of the carrier oscillator. The "balanced" switch activates the ring modulation between both VCOs. intensity of modulation is controlled by the "mood index" potentiometer and the according CV input with bipolar attenuator.
Read more
 1 in stock $599.07
Cat: 570811 Rel: 11 Aug 15
 
Voltage controlled analog waveform decimator effects module - 8HP wide
Notes: The Crush is an audio destroyer; a voltage controlled, all analog sound decimator. A sonic laser designed to shatter waveforms into a million pieces. The sound of the Crush module is defined by three parameters, Sample Rate, Interpolation, and Mix. Sample Rate assigns the periodic voltage sample timing, breaking down an audio source into ever-larger static chunks. The Interpolate switch tries to rebuild the original waveform from the remaining pieces imprinting another layer of errors and unique artifacts on the output. The results are crushing.

The Crush wrecks audio without ever sounding harsh or thin. Compared to a digital bit crusher, the analog Crush sounds full and warm. Taking advantage of unlimited bit and sample rate resolutions, the Crush avoids lo-fi digital results by smoothly downsampling at infinite resolution.

An integrated voltage controlled mix circuit allows the perfect amount of destruction to be added to the audio. Manually set the mix or use a control voltage to sweep from squeaky clean to completely crushed.

CRUSH CONTROLS:
Sample Rate Control - Sample rate control.

Sample Rate CV In Control - Sample Rate CV input jack attenuator.

Interpolate/Step Mode Switch - Step mode offers true downsampling. Interpolate mode attempts to smooth the downsampled waveform.

Output Mix Control - Controls the signal mix of the Mix Out.

Mix CV In Control - Mix CV input jack attenuator.

Crush Patch Points:
SR CV IN - CV input modulates the Sample Rate.
MIX CV IN - CV input modulates the Output Mix.
INPUT - Waveform Input.
CRUSH OUT - Processed waveform output.
OUTPUT - Mixed waveform output

*For audio samples, please visit - http://pittsburghmodular.com/crush/
Read more
 1 in stock $139.24
Cat: 561577 Rel: 15 Sep 15
 
Wavetable module with 21st century advanced wavetable engine with classic Waldorf wavetables included - 32HP
Notes: nw1 is our debut product for the popular Eurorack format. It includes an advanced wavetable engine with independent control of spectral envelope and noisiness - just like Nave.

Wavetable scanning is cyclic with optional modulation of travel speed, position, spectrum, and more besides. By providing the worshipped Waldorf wavetable set from the classic Microwave and Wave synthesizers, nw1 will enrich your Eurorack modular system as a potently powerful sound source. The nw1 sound engine also allows for onboard creation of user wavetables via time domain multiple foldover analysis. All you need to do is connect any sound source to the nw1 to transfer audio into a wavetable. Or use the integrated speech synthesizer to translate typed text into wavetables.

Wavetable synthesis is an extremely powerful sound source suited to producing all kinds of vivid metallic hues and digital clangorous tones. It can create organic, bell-like timbres, as well as spectacular-sounding scans through various waveforms with truly ear-opening results. It was almost impossible to create these kinds of sharp-edged, digital sounds back before the invention of wavetable synthesis in the late-Seventies.

Starting with the wavetable synthesizers of those days, a whole new sound palette left its imprint on so many hit records. Today, with Waldorf's neatly-sized nw1 Wavetable Module, this sound is readily available for the popular Eurorack standard - sounding just as pure, sharp, and massively destructive as it did back in the golden days of digital!
Read more
 2 in stock $165.14
Click for better price!
quote 561577
Cat: 667536 Rel: 15 Sep 15
 
B-STOCK: Box slightly damaged, missing jumper cable, product in perfect working order
Notes: ***B-STOCK: Box slightly damaged, missing jumper cable, product in perfect working order***


nw1 is our debut product for the popular Eurorack format. It includes an advanced wavetable engine with independent control of spectral envelope and noisiness - just like Nave.

Wavetable scanning is cyclic with optional modulation of travel speed, position, spectrum, and more besides. By providing the worshipped Waldorf wavetable set from the classic Microwave and Wave synthesizers, nw1 will enrich your Eurorack modular system as a potently powerful sound source. The nw1 sound engine also allows for onboard creation of user wavetables via time domain multiple foldover analysis. All you need to do is connect any sound source to the nw1 to transfer audio into a wavetable. Or use the integrated speech synthesizer to translate typed text into wavetables.

Wavetable synthesis is an extremely powerful sound source suited to producing all kinds of vivid metallic hues and digital clangorous tones. It can create organic, bell-like timbres, as well as spectacular-sounding scans through various waveforms with truly ear-opening results. It was almost impossible to create these kinds of sharp-edged, digital sounds back before the invention of wavetable synthesis in the late-Seventies.

Starting with the wavetable synthesizers of those days, a whole new sound palette left its imprint on so many hit records. Today, with Waldorf's neatly-sized nw1 Wavetable Module, this sound is readily available for the popular Eurorack standard - sounding just as pure, sharp, and massively destructive as it did back in the golden days of digital!
Read more
 1 in stock $167.31
Cat: 751114 Rel: 15 Sep 15
 
B-STOCK: Box damaged, product unused & in perfect condition
Notes: ***B-STOCK: Box damaged, product unused & in perfect condition***


nw1 is our debut product for the popular Eurorack format. It includes an advanced wavetable engine with independent control of spectral envelope and noisiness - just like Nave.

Wavetable scanning is cyclic with optional modulation of travel speed, position, spectrum, and more besides. By providing the worshipped Waldorf wavetable set from the classic Microwave and Wave synthesizers, nw1 will enrich your Eurorack modular system as a potently powerful sound source. The nw1 sound engine also allows for onboard creation of user wavetables via time domain multiple foldover analysis. All you need to do is connect any sound source to the nw1 to transfer audio into a wavetable. Or use the integrated speech synthesizer to translate typed text into wavetables.

Wavetable synthesis is an extremely powerful sound source suited to producing all kinds of vivid metallic hues and digital clangorous tones. It can create organic, bell-like timbres, as well as spectacular-sounding scans through various waveforms with truly ear-opening results. It was almost impossible to create these kinds of sharp-edged, digital sounds back before the invention of wavetable synthesis in the late-Seventies.

Starting with the wavetable synthesizers of those days, a whole new sound palette left its imprint on so many hit records. Today, with Waldorf's neatly-sized nw1 Wavetable Module, this sound is readily available for the popular Eurorack standard - sounding just as pure, sharp, and massively destructive as it did back in the golden days of digital!
Read more
 2 in stock $159.44
Cat: 751146 Rel: 15 Sep 15
 
B-STOCK: Missing screws and cable, product unused & in perfect condition
Notes: ***B-STOCK: Missing screws and cable, product unused & in perfect condition***


nw1 is our debut product for the popular Eurorack format. It includes an advanced wavetable engine with independent control of spectral envelope and noisiness - just like Nave.

Wavetable scanning is cyclic with optional modulation of travel speed, position, spectrum, and more besides. By providing the worshipped Waldorf wavetable set from the classic Microwave and Wave synthesizers, nw1 will enrich your Eurorack modular system as a potently powerful sound source. The nw1 sound engine also allows for onboard creation of user wavetables via time domain multiple foldover analysis. All you need to do is connect any sound source to the nw1 to transfer audio into a wavetable. Or use the integrated speech synthesizer to translate typed text into wavetables.

Wavetable synthesis is an extremely powerful sound source suited to producing all kinds of vivid metallic hues and digital clangorous tones. It can create organic, bell-like timbres, as well as spectacular-sounding scans through various waveforms with truly ear-opening results. It was almost impossible to create these kinds of sharp-edged, digital sounds back before the invention of wavetable synthesis in the late-Seventies.

Starting with the wavetable synthesizers of those days, a whole new sound palette left its imprint on so many hit records. Today, with Waldorf's neatly-sized nw1 Wavetable Module, this sound is readily available for the popular Eurorack standard - sounding just as pure, sharp, and massively destructive as it did back in the golden days of digital!
Read more
 1 in stock $156.52
Cat: 752894 Rel: 15 Sep 15
 
B-STOCK: Box damaged, product unused & in perfect condition
Notes: ***B-STOCK: Box damaged, product unused & in perfect condition***


nw1 is our debut product for the popular Eurorack format. It includes an advanced wavetable engine with independent control of spectral envelope and noisiness - just like Nave.

Wavetable scanning is cyclic with optional modulation of travel speed, position, spectrum, and more besides. By providing the worshipped Waldorf wavetable set from the classic Microwave and Wave synthesizers, nw1 will enrich your Eurorack modular system as a potently powerful sound source. The nw1 sound engine also allows for onboard creation of user wavetables via time domain multiple foldover analysis. All you need to do is connect any sound source to the nw1 to transfer audio into a wavetable. Or use the integrated speech synthesizer to translate typed text into wavetables.

Wavetable synthesis is an extremely powerful sound source suited to producing all kinds of vivid metallic hues and digital clangorous tones. It can create organic, bell-like timbres, as well as spectacular-sounding scans through various waveforms with truly ear-opening results. It was almost impossible to create these kinds of sharp-edged, digital sounds back before the invention of wavetable synthesis in the late-Seventies.

Starting with the wavetable synthesizers of those days, a whole new sound palette left its imprint on so many hit records. Today, with Waldorf's neatly-sized nw1 Wavetable Module, this sound is readily available for the popular Eurorack standard - sounding just as pure, sharp, and massively destructive as it did back in the golden days of digital!
Read more
 1 in stock $155.93
Cat: 569573 Rel: 23 Sep 15
 
Liquid filter Eurorack synth module
Notes: Ripples delivers a classic, big-sounding analog four-pole filter in a small 8-HP package, continuing Mutable Instruments' lineage of warm and tasty filters started by the Shruthi SMR4 mkII and 4-Pole Mission.

3 filter modes are available: 2-pole band-pass, 2-pole low-pass, and 4-pole low-pass.

Self-oscillation is available for all modes and produces a clean sine-wave on the LP4 output. Unlike many classic 4-pole designs, this filter does not suffer from "loudness drop" when resonance is increased. The resonance loudness compensation circuit brings a slight tone coloration reminiscent of the Roland SH/Jupiter filters, with a very round and "liquid" resonance.

The 4-pole low-pass output is additionally sent to a VCA. This makes Ripples a good "final stage" module for an inexpensive/space-constrained subtractive synthesis synth voice.

*For audio samples, please visit - http://mutable-instruments.net/modules/ripples
Read more
 4 in stock $155.43
Cat: 588813 Rel: 02 Oct 15
 
Passive quad attenuator synthesiser module - 4HP wide
Notes: QUAD ATTEN is a passive quad attenuator in a small 4hp profile.

Although quite basic, attenuators are extremely powerful in a modular system.

They are especially useful for adjusting the depth of control voltages going into modules that lack CV attenuators.

Power Draw: +0mA, -0mA (Passive). 6HP width. 25mm Depth.
Read more
 5 in stock $66.91
WMD/SSF Ultrafold Module (synth module)
Cat: 588817 Rel: 02 Oct 15
 
Voltage controlled wave folder synthesiser module - 6HP wide
Notes: ULTRAFOLD is a powerful voltage controlled wave folder.

The input drive and wave fold controls make up the heart of the design, providing warm saturation and additive harmonics to the input signal.

The wave shift control offsets the input signal to allow for asymmetrical folding - unveiling the subtleties in the distribution of spectral content.

The novel bipolar feedback control takes wave folding to a new level by returning the folded output to the input, thereby skewing the wave shapes for dramatic changes to the upper harmonics.

An auxiliary feedback input is provided to allow for insane folded FM sounds when another oscillator drives this input.

Power Draw: +30mA, -30mA. 6HP width. 25mm Depth.
Read more
 1 in stock $181.33
Click for better price!
quote 588817
WMD/SSF Blender Module (synth module)
Cat: 588818 Rel: 02 Oct 15
 
4 channel mixer and voltage controlled cross-fader synthesiser module - 6HP wide
Notes: BLENDER is a four channel mixer and voltage controlled cross-fader. BLENDER simplies mixing audio and control voltages (CV) by incorporating a single control to blend two signals at a time - also known as a cross-fader.

Two manual cross-faders and a single voltage controlled master cross-fader are provided.

Use BLENDER as a main mixer or as a dynamic control for creating complex control voltages and waveforms from your signal generators.

Power Draw: +20mA, -20mA. 6HP width. 25mm Depth.
Read more
 1 in stock $144.63
Click for better price!
quote 588818
WMD/SSF ADSR VCA Module (synth module)
Cat: 588820 Rel: 02 Oct 15
 
Multi-mode envelope generator with an integrated Voltage Controlled Amplifier(VCA) synthesiser module - 6HP wide
Notes: ADSRVCA is a multi-mode envelope generator with an integrated Voltage Controlled Amplifier(VCA).

This envelope generator is capable of producing a classic, gate driven Attack/Decay/Sustain/Release (ADSR) envelope as well as a self sustaining, looping Attack Decay (AD) and Attack Decay Release (ADR) one shot envelopes.

The integrated VCA eliminates the need for an external VCA module and can be used independently when an external control voltage is utilized.

The envelope controls the shape of the VCA’s amplitude response by default.

Power Draw: +36mA, -16mA. 6HP width. 25mm Depth.
Read more
 1 in stock $170.54
Click for better price!
quote 588820
Cat: 588822 Rel: 02 Oct 15
 
Polarizing scaler and offset generator synthesiser modular - 4HP wide
Notes: S.P.O. is a polarizing scaler and offset generator.

Up to two inputs can be summed into a single scaler/offset generator.

The offset generator provides a DC voltage source for shifting signals into the positive or negative voltage region.

The scaler provides a means of attenuating and polarizing (inverting) the applied signal. S.P.O. works with audio and control voltages (CV).
Read more
 1 in stock $107.93
Cat: 753118 Rel: 02 Oct 15
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


MMF is a 2 pole Multi-Mode Filter in 4 HP. It has simultaneous LowPass, BandPass and HighPass filter outputs.

MMF will self oscillate into a nice sine wave and track 1V/octave. The Resonance is voltage controllable.

The PING input is for a gate or trigger, and generates a fast decay envelope with a nice sound, reminiscent of a vactrol filter, but without the vactrol. PING can normal to the FM jack, or go direct (switchable behind the panel).

The FM input is connected to an attenuverter pot to give you control over the signal.

Power Draw: +62mA, -24mA. 4HP Width. 25mm Depth.
Read more
 1 in stock $159.69
Cat: 588826 Rel: 02 Oct 15
 
Delay synthesiser module - 4HP wide
Notes: DPLR is a delay module with two interactive delay lines, each with 750mS of delay time.

One input is split to two delays which share overall delay time (DELAY) and regeneration (REGEN). Side B has control over its delay offset (SPREAD) from side A.

Delay, Spread and Regen are all voltage controllable. Regen at max will echo indefinitely, and can create interesting noise swashes.

The pushbutton at the top taps through seven different crosstalk configurations (Regen isolated through ping-pong). Push and hold to change through four different Regen Filter settings from very bright to dark.
Read more
 2 in stock $167.30
Click for better price!
quote 588826
Artikel 1 bis 50 von 791 auf Seite 1 von 16 anzeigen
1  2  3  ...  16  »

Filter

Saved Searches
Save current search
Release Date
Close