100% Sicheres Einkaufen

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Sicheres Einkaufen

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

View:
Options
Artikel 1 bis 50 von 846 auf Seite 1 von 17 anzeigen
1  2  3  ...  17  »
FORTHCOMING
Omnitronic PM422P 4 Channel DJ Mixer With Bluetooth & USB Player Omnitronic PM422P 4 Channel DJ Mixer With Bluetooth & USB Player Omnitronic PM422P 4 Channel DJ Mixer With Bluetooth & USB Player Omnitronic PM422P 4 Channel DJ Mixer With Bluetooth & USB Player Omnitronic PM422P 4 Channel DJ Mixer With Bluetooth & USB Player Omnitronic PM422P 4 Channel DJ Mixer With Bluetooth & USB Player
coming soon $185.52
Cat: 746966 Rel: 12 Sep 19 • View all Synth modules
 
Great sounding VCO for Eurorack - 10HP
Notes: Here's the Roland 100M VCO adapted to Euro. The hard-to-find UA726 has been replaced with a CA3046 with no loss of performance. No hard to find parts whatsoever. The PCB also includes pads for SMD LM3046. It'a the golden age right here.

- A six position rotary switch for octaves gives plenty of range. The PITCH pot is fine tune
- Individual outputs for ramp, square and triangle - an improvement on the original
- Built in chip heater
- Onboard LFO! Yes that's right, an onboard LFO (thanks MC202) for introducing FM and/or PWM
Read more
out of stock $185.54
Cat: 745782 Rel: 09 Sep 19 • View all Synth modules
 
Controller unit for the A-155 sequencer
Notes: Module A-154 is a supplement to the A-155 Analog/Trigger Sequencer module. It offers a lot of new features that are not available in the basic control unit of the A-155. The A-154 is used to replace the control unit of one or two A-155, i.e. the section marked "Control" with Start / Stop / Step / Reset buttons and inputs in the upper left corner of the A-155 front panel. If the A-154 is used to control the A-155 the control section of the A-155 is put out of action.

These are the features of the A-154:

Several running modes: forward, backward, pendulum, random, CV controlled step addressing. All modes are available as loop or one-shot.

LED display of the 5 different current modes and one LED for loop/one-shot display

Manual and voltage controlled selection (with attenuator) of the running mode. If no external control voltage is applied one of the 10 modes (5 modes x 2 loop/one-shot) is simply selected with a rotary knob. The CV input with attenuator is used to modulate the running mode with an external control voltage (digital high/low CV to switch between two modes or continuous analogue CV to sweep through different modes). With the combination of manual control and CV with attenuator it is possible e.g. to use only two neighbouring modes (e.g. forward/backward) or sweep through all possible running modes

Manual and voltage controlled selection (with attenuator) of first and last step of the sequence. The range is step 1...8 in 8 step mode resp. 1...16 in 16 step mode

If the running mode "CV Controlled Step Address" is selected the First Step section is used to determine the active sequencer step. Consequently manual and voltage controlled selection (with attenuator) of the active step is possible: the active step can be set by hand with the first step manual control and then modulated by an external control voltage (e.g. LFO, Random, S&H, Theremin, Light CV source, Joy Stick) at the first step CV input (with attenuator).

An internal voltage controlled clock generator with manual and CV control (with attenuator) is available. The output of the clock generator is displayed with a LED and is used as sequencer clock provided that no external clock signal is connected to the Clock In socket (normalled socket). If the CV input of the Clock section is connected to one of the analogue outputs of the sequencer the time for each step can be set separately. Even jumps (or skipping) will be possible as we will introduce the feature that a very short clock pulse will be generated if the control voltage exceeds a certain value. For example the gate row of the A-155 can be used to obtain skipping of steps: the gate output simply has to be connected to the CV input of the A-154 clock generator. If the corresponding switch of the A-155 is set correspondingly in the gate row the step will be skipped.

Manual and voltage controlled (with attenuator) pulse width (PW) of the clock signal. This features can be used to obtain a different gate length for each step: e.g. one of the CV outputs of the A-155 can be used to control the PW. With a PW control voltage coming from a LFO/random/S&H the gate length will change automatically. CV coming from Theremin A-178, ribbon controller A-198, light controlled CV A-179, joy stick A-174 are other ways to control the gate length.

8/16 step mode: A toggle switch us used to select 8 or 16 steps. The "16 step" mode requires two A-155 and one or more voltage controlled switches (e.g. A-150-1 or A-150-8). The voltage controlled switches are controlled by the "A3" output of the A-154. This output remains "low" as long as the active step is in the range 1...8 and turns to "high" in the range 9...16. The voltage controlled switches are used to switch between the CV/trigger/gates outputs of the first A-155 (step 1...8) and the second A-155 (step 9...16). In the A-154 user's manual the corresponding patch is shown.

If two A-155 are used they can work in parallel (8 steps) or serial (16 steps). The 8/16 steps switch determines if the 8 step mode (one A-155 or two A-155 in parallel) or the 16 step mode (two A-155 serial) is chosen. Both modes work with CV controlled step addressing too (see below). In 8 step mode only the steps 1...8 are addressed, in 16 step mode the steps 1...16. For serial operation an additional VC switch (A-150) is required - as mentioned above.
Read more
 1 in stock $170.94
Click for better price!
quote 745782
Cat: 745783 Rel: 09 Sep 19 • View all Synth modules
 
Controller unit for the A-155 sequencer
Notes: Module A-154 is a supplement to the A-155 Analog/Trigger Sequencer module. It offers a lot of new features that are not available in the basic control unit of the A-155. The A-154 is used to replace the control unit of one or two A-155, i.e. the section marked "Control" with Start / Stop / Step / Reset buttons and inputs in the upper left corner of the A-155 front panel. If the A-154 is used to control the A-155 the control section of the A-155 is put out of action.

These are the features of the A-154:

Several running modes: forward, backward, pendulum, random, CV controlled step adressing. All modes are available as loop or one-shot.

LED display of the 5 different current modes and one LED for loop/one-shot display

Manual and voltage controlled selection (with attenuator) of the running mode. If no external control voltage is applied one of the 10 modes (5 modes x 2 loop/one-shot) is simply selected with a rotary knob. The CV input with attenuator is used to modulate the running mode with an external control voltage (digital high/low CV to switch between two modes or continuous analog CV to sweep through different modes). With the combination of manual control and CV with attenuator it is possible e.g. to use only two neighbouring modes (e.g. forward/backward) or sweep through all possible running modes

Manual and voltage controlled selection (with attenuator) of first and last step of the sequence. The range is step 1...8 in 8 step mode resp. 1...16 in 16 step mode

If the running mode "CV Controlled Step Address" is selected the First Step section is used to determine the active sequencer step. Consequently manual and voltage controlled selection (with attenuator) of the active step is possible: the active step can be set by hand with the first step manual control and then modulated by an external control voltage (e.g. LFO, Random, S&H, Theremin, Light CV source, Joy Stick) at the first step CV input (with attenuator).

An internal voltage controlled clock generator with manual and CV control (with attenuator) is available. The output of the clock generator is displayed with a LED and is used as sequencer clock provided that no external clock signal is connected to the Clock In socket (normalled socket). If the CV input of the Clock section is connected to one of the analog outputs of the sequencer the time for each step can be set separately. Even jumps (or skipping) will be possible as we will introduce the feature that a very short clock pulse will be generated if the control voltage exceeds a certain value. For example the gate row of the A-155 can be used to obtain skipping of steps: the gate output simply has to be conneted to the CV input of the A-154 clock generator. If the corresponding switch of the A-155 is set correspondingly in the gate row the step will be skipped.

Manual and voltage controlled (with attenuator) pulse width (PW) of the clock signal. This features can be used to obtain a different gate length for each step: e.g. one of the CV outputs of the A-155 can be used to control the PW. With a PW control voltage coming from a LFO/random/S&H the gate length will change automatically. CV coming from Theremin A-178, ribbon controller A-198, light controlled CV A-179, joy stick A-174 are other ways to control the gate length.

8/16 step mode: A toggle switch us used to select 8 or 16 steps. The "16 step" mode requires two A-155 and one or more voltage controlled switches (e.g. A-150-1 or A-150-8). The voltage controlled switches are controlled by the "A3" output of the A-154. This output remains "low" as long as the active step is in the range 1...8 and turns to "high" in the range 9...16. The voltage controlled switches are used to switch between the CV/trigger/gates outputs of the first A-155 (step 1...8) and the second A-155 (step 9...16). In the A-154 user's manual the corresponding patch is shown.

If two A-155 are used they can work in parallel (8 steps) or serial (16 steps). The 8/16 steps switch determines if the 8 step mode (one A-155 or two A-155 in parallel) or the 16 step mode (two A-155 serial) is chosen. Both modes work with CV controlled step addressing too (see below). In 8 step mode only the steps 1...8 are addressed, in 16 step mode the steps 1...16. For serial operation an additional VC switch (A-150) is required - as mentioned above.

The functions of the Start/Stop/Step/Reset buttons and inputs are the same as for the "old" control unit of the A-155:

A high level at the Start input or operating the Start button starts the sequence from the momentarily addressed step. Not working in "CV controlled step address" mode.

A high level at the Stop input or operating the Stop button stops the sequence (the last active step remains addressed). Not working in "CV controlled step address" mode.
Read more
 1 in stock $157.38
Cat: 739070 Rel: 12 Sep 19 • View all Plattentaschen
 
High quality record bag holds 100 x 7" records with extra pockets
Notes: We created the Tucker & Bloom Sidekick 45 Bag for the working DJ. This functional, long-lasting bag houses everything you need without any of the clutter. The 45 Bag is the sized-down little brother of our popular DJ Rich Medina 45 Bag. Waterproof Ballistic Nylon withstands the bumps and scrapes along the way, and a vegetable-tanned leather carrying handle and ergonomic shearling shoulder strap make transport through an airport or to the club a cinch.

A velveteen-lined interior holds up to 100 seven-inch records, which are secured with our Takeout Top velcro flaps and nickel-cast brass hardware. Two side pockets hold spare needles and headphones, and a back slip pocket is the perfect size for a notebook. The front pocket was designed to hold cables, a recording device, or whatever else is jiggling around in your jeans. Slide business cards or adapters into an easy-to-access top pocket. Just like all Tucker & Bloom products, the 45 Bag includes our lifetime warranty. Bring all the essentials with you for your set and leave the rest at home with the Tucker & Bloom Sidekick 45 Bag.
Read more
 2 in stock $177.19
Click for better price!
quote 739070
Cat: 739069 Rel: 12 Sep 19 • View all Plattentaschen
 
High quality record bag holds 100 x 7" records with extra pockets
Notes: We created the Tucker & Bloom Sidekick 45 Bag for the working DJ. This functional, long-lasting bag houses everything you need without any of the clutter. The 45 Bag is the sized-down little brother of our popular DJ Rich Medina 45 Bag. Waterproof Ballistic Nylon withstands the bumps and scrapes along the way, and a vegetable-tanned leather carrying handle and ergonomic shearling shoulder strap make transport through an airport or to the club a cinch.

A velveteen-lined interior holds up to 100 seven-inch records, which are secured with our Takeout Top velcro flaps and nickel-cast brass hardware. Two side pockets hold spare needles and headphones, and a back slip pocket is the perfect size for a notebook. The front pocket was designed to hold cables, a recording device, or whatever else is jiggling around in your jeans. Slide business cards or adapters into an easy-to-access top pocket. Just like all Tucker & Bloom products, the 45 Bag includes our lifetime warranty. Bring all the essentials with you for your set and leave the rest at home with the Tucker & Bloom Sidekick 45 Bag.
Read more
 2 in stock $164.68
Click for better price!
quote 739069
Polyend Anywhere Powerbank Module (power supply module)
Cat: 732313 Rel: 11 Sep 19 • View all Synth modules
 
Portable power source interface for Eurorack
Notes: Release your mind and release your modular system, with the Polyend Anywhere power compatibility Eurorack module. The Polyend Anywhere hooks up to any Power Bank battery to allow the user the liberty of portability with their modular system. Take your system for a walk! Smell the flowers, and use the inspiration to create the simultaneous feedback/AM/FM patch you've been dreaming of!
Read more
 5 in stock $173.02
Click for better price!
quote 732313
Cat: 744063 Rel: 12 Sep 19 • View all Synth modules
 
CEM3340 based VCO - 10HP
Notes: CEMosc is here, a stable AS3340 based VCO which tracks beautifully, and is feature rich. Easy to build and calibrate too.

CEMosc features:

- Onboard voltage regulation for tuning and tracking stability
- A rotary octave switch as well as a fine tune knob
- Both manual PW as well as PWM are available
- Linear and Exponential FM inputs, each with attenuators
- Both soft and hard sync
- Sawtooth, Triangle and Pulse outputs
Read more
 1 in stock $185.52
Click for better price!
quote 744063
Cat: 746891 Rel: 12 Sep 19 • View all Studio-Kopfhörer
 
Professional, studio-quality headphones with wide frequency response
Notes: The RH-50 high-performance headphones are further evidence of Rane's unwavering dedication to both engineering excellence and ease of use. Recognizing that too many headphones designed for serious listening fall short of combining all the elements of great headphones into a single unit-full-range frequency response, ear pads that deliver hours of comfort, space-saving collapsible design and detachable cables with multiple jacks for use with virtually any gear-the RH-50 brings all these critical attributes together in one no-compromise unit. The result is a superb-sounding, comfortable, convenient unit that professionals and enthusiasts alike will depend on and enjoy, no matter how demanding the requirement.

The drivers are heavy-duty 40mm neodymium-powered units, which gives the RH-50 a particularly deep and potent bass response. When combined with their high-temperature/high-power voice coils, the overall effect is one of effortless authority, where every musical nuance is reproduced with detail and accuracy. The headphones are a collapsible design, making them easy to transport and the soft padded head band and ear pads stay comfortable during extended sessions.

In the box:

- RH-50 Headphones
- 39.4" (1m) straight detachable, locking 2.5mm (headphone end) to 3.5mm cable
- 55" (1.4m) coiled detachable, locking 2.5mm (headphone end) to 3.5mm cable
- 3.5mm to 1/4" TRS adapter
Read more
 2 in stock $155.31
Click for better price!
quote 746891
Cat: 681306 Rel: 24 Jul 18 • View all Synth modules
 
Multi-algorithm macro oscillator - 12HP
Notes: Plaits is the spiritual successor of Mutable Instruments' best-selling voltage-controlled sound source, Braids. Not just an MKII version: its hardware and software have been redesigned from scratch.

Just like its predecessor, it offers direct access to a large palette of easily tweakable raw sonic material, covering the whole gamut of synthesis techniques.

Simplicity first:

Gone are the screen, menu system, hidden settings, and the long list of somewhat redundant synthesis models.

Thanks to additional CV inputs, and to the use of three timbre-shaping parameters per model, Plaits is straightforward to use, and much closer to the ideal of one synthesis technique = one model. What were fragmented islands of sound in Braids are now part of a continuum of sounds.

Ready for percussion:

Patch a trigger generator or sequencer into Plaits' trigger input and instantly use the module as a percussive source thanks to its built-in virtual low-pass gate (LPG).

An internal D (decay) envelope generator is normalled to all unpatched CV inputs. Just turn the corresponding attenuverter to add pitch, timbre or morphing modulation. And if plucks and snappy hits are not your thing, patch your own envelope or CV source into the LPG CV input.
Read more
 More than 10 in stock $183.44
Click for better price!
quote 681306
Cat: 601628 Rel: 25 Feb 16 • View all DJ-Kopfhörer
 
Professional DJ headphones with coiled and straight cables & replacement cushions
Notes: The HD 25 PLUS is identical in design to the HD 25 but spoils its users with extra accessories and two included cables. Users can choose between a coiled steel cable (length: 3m/1m) and a straight, 1.5m steel cable.

The PLUS version also comes with a handy storage pouch and a second set of ear pads in a soft velour version.
Read more
 3 in stock $163.65
Click for better price!
quote 601628
Cat: 561353 Rel: 22 May 15 • View all DJ-Controller
 
All-in-one controller solution for Serato DJs, with 5" high resolution metal jog wheels & 100mm pitch sliders
Notes: From Numark the world's leading innovator of DJ equipment and technologies, comes the incredible MIXTRACK PRO 3 DJ controller, designed with the skilled, professionally-aspiring DJ in mind. It's the latest addition to the Numark family of industry-leading DJ solutions.

This controller offers a whole host of features and performance that sets it way above conventional DJ controllers, yet it offers great bang-for-the-buck and it's a snap to take anywhere.

The place is hot. The action is non-stop. You're the one in the driver's seat. We make sure you have the horsepower to get it done. Mixtrack Pro 3 will never let you down. We've kept everything you loved about the Mixtrack Pro 2, but now there's even more.

How's this - we give you 100mm pitch sliders that make it easy to perform even the finest pitch adjustments, so it's easy to keep two cuts in perfect beat sync without any drift. Other people's 60mm pitch sliders can't come close to matching this performance. We make you look and sound great!

Dive into our 16 multi-function backlit performance pads and add loops, launch samples, and control hot cues to your performance. Use the multi-function touch strip for dynamic FX control and track search operation. There are dedicated filter knobs for each channel, to give you just the exact amount of tonal control you need for that perfect sound. If you can think it, Mixtrack Pro 3 will do it.

Jumpstart your inspiration with 6 sample packs from Prime Loops including over 380 premium instrumental loops, drum kits, one-shots, and more. A $200 value.

Remix with the sounds of the world's premier electronic music label. Mixtrack Pro 3 gives you exclusive access to download studio-grade audio stems from the Toolroom Records catalog, allowing you the freedom to layer, tweak and chop today's most relevant sonic textures.

Get precise control over every track and every transition with Mixtrack Pro 3's advanced low-profile rugged metal platters. They are capacitive and dual-zone, giving you the ability to scratch or stop a track simply by touching the top of the platter, while at the same time allowing you to adjust the pitch by manipulating the platter from the side. Heavy-duty metal stands up to the hottest action, night after night.

Mixtrack Pro 3 gives you comprehensive control over its included Serato software. Plus, it's class-compliant with both Mac and PC, so you'll be able to plug in and start mixing your music right away - no drivers or complicated set up necessary.

Simply plug-and-play - Serato DJ Intro and Mixtrack Pro 3 take the hassle out of setting up: connect your speakers to your Mixtrack Pro 3 and connect your Mixtrack Pro 3 to your laptop - it's that simple.

Mix it up - Beatmatch and scratch music files from your computer like a pro with Serato DJ Intro's groundbreaking colored waveforms.

Get creative - Cue Points and Loops let you mark, access, and repeat specific parts of a song, while Serato's DJ FX infuse your tracks with a range of professional effects like flanger, phaser, echo, and more.

Drop it - Drop air horns or entire tunes; the four-slot sample player will help you layer individual sounds to add even more fun to your sets.

Create professional sounding mixes at home or performing live at parties, functions, and clubs. Mixtrack Pro II operates via standard MIDI, so it's compatible with virtually any popular DJ software.

With its built-in audio system, Mixtrack Pro 3 is ready to go right out of the box. Plug in your headphones, microphone, and PA system and start mixing right away with no external audio interface needed. Plus, Mixtrack Pro 3 has two headphone jacks, making it easy to mix with friends and fellow DJs or tradeoff in-between sets.

This controller gets its design inspiration from no-compromise professional units like our NV controller. The MIXTRACK PRO 3 is a performance-driven design, but with a sharp eye on value. Start mixing today like the pro that you are!
Read more
 4 in stock $164.69
Click for better price!
quote 561353
Cat: 572312 Rel: 27 Apr 15 • View all DJ-Kopfhörer
 
Professional DJ preset modular headphones with 40mm titanium coated drivers & 3.2m coiled cable with 1/4" adapter
Notes: This configuration is based on the original TMA-1 DJ, which is the preferred choice of a range of acclaimed DJs. Centered sound stage and high isolation.

This preset has been configured with the titanium-coated S02 speaker unit that delivers a punchy and intense sound representation, focusing on bass and low end dynamics. The combination of the durable H02 nylon headband and the E02 on-ear PU leather earpads, which provides high isolation, results in a powerful, sturdy headphone suitable for live performance and electronic/bass heavy music.

Engineered with a 40mm titanium-coated driver to reduce distortion, and designed with an internal vent allowing the middle bass to be more clear and punchy, which is great for picking up the beat. A gradual dip towards the high frequencies prevent listening fatigue.

The Speaker Unit housing is injected moulded from durable ABS material and coated with rubber to give a matte look with a soft feeling. Both plugs feature a cable lock that securely locks the cable in place.

New reinforced injection-moulded headband made from the best engineering nylon grade available. A durable compression moulded silicone headpad gives a better grip and the rugged headband is easy to clean after a long night in the club.

Gold plated plugs ensure optimal connection to your speaker units and the cable locks keeps the cable in place.

Soft on-ear foam cushion covered with PU leather. The thickness of the cushion and the materials used give a closed and intense sound representation. Produces strong bass and low end dynamics.

High isolation. Good for DJing and electronic music. Centred sound stage and high isolation. Height 20 mm. Outer diameter 70mm. Inner diameter 32mm.

Coiled, black, 1.5m thermo plastic cable with soft touch surface. Extends up to 3.2m. Perfect for DJing or small studio use. Comes with 1/4" to 1/8" screw-on adaptor.
Read more
 4 in stock $164.68
Click for better price!
quote 572312
Cat: 643379 Rel: 13 Sep 17 • View all Synth modules
 
Quad voltage controlled amplifier & cascaded mixer - 12HP wide
Notes: The Quad VCA is a compact and feature packed module that is sure to find its way it almost all of your patches. In addition to being used for standard VCA duties it can also be used as a mixer and signal booster.

Features:

- Manual LEVEL control per VCA which is convenient when using the module as a mixer or for biasing when CV modulating the VCA with a bipolar LFO.
- Dedicated CV attenuators with dual colour LEDs for monitoring bipolar CV signals.
- Continuously adjustable response from linear to exponential per VCA.
- Each CV input is normalled to the adjacent one for cascaded control.
- Each output is normalled to the mix input of the adjacent one which allows you to use adjacent sets as submixes or the fourth output can be used as a master mix output when none of the other outputs are patched.
- Each VCA has a boost switch that increases the output level by approximately +6dB (double).
Read more
 7 in stock $184.48
Cat: 569556 Rel: 03 Mar 16 • View all Synth modules
 
Topographic drum sequencer module - 16HP wide
Notes: Take the user interface of an euclidean sequencer, a healthy dose of machine learning and graph algorithms, megabytes of drum loops, hours of intensive computations and you've got a drum pattern generator like no other.

Grids' "brain" is a map of the typical drum patterns used in (mostly electronic) music, laid out by similarity, trained on a large corpus of drum loops. The module can smoothly interpolate and navigate from one pattern to the other, at the whim of a knob move or a CV.

But Grids' knowledge of drum patterns goes far beyond what would be achieved with presets - given a position in the map, thousands of variations can be intuitively generated by controlling the "event density" of each of the 3 channels (bd, sd, hh) - gradually moving from a sparse backbone to a deliciously rich pattern with ghost notes, rolls and fills.

Add CV-control on these parameters and you can add subtle or drastic variations to the drum pattern. If you don't want to waste a noise source or S&H for that, Grids has its own internal source of randomness that can unpredictably spice the pattern, in an always meaningful way.

Building the rhythmic foundation of your tracks with Grids is fun, surprisingly intuitive, with modulation and variations possibilities that will rapidly make you forget x0x-style sequencers.

*For audio demos, please visit - http://mutable-instruments.net/modules/grids
Read more
 4 in stock $170.93
Click for better price!
quote 569556
Cat: 616166 Rel: 09 Jun 16 • View all Synth modules
 
Quad VCA & mixer synth module - 12HP wide
Notes: VCAs are the cornerstones of modular patches: shaping the amplitude or timbre of a tone with an envelope, animating a mixture of several oscillators, controlling the amount of filter modulation with a random source or a touch controller, applying an envelope on the linear FM signal hitting an oscillator... are all possible uses of these super versatile building blocks. That's why you never have enough of them.

What about four more?
Veils provides four VCAs with an adjustable response curve. Veils' outputs are daisy-chained, allowing adjacent groups of 2, 3, or all 4 channels, to be mixed together.
Read more
 2 in stock $150.09
Click for better price!
quote 616166
Cat: 560349 Rel: 04 Feb 15 • View all Effects pedals
 
Polyphonic pitch shifter effects pedal, transposes over a +/- three octave range
Notes: The Pitch Fork transposes an instrument's pitch over a +/- three octave range and features three modes which allow the pitch to be transposed up, down or both, simultaneously. The pitch shift amount can be set to a fixed interval or continuously varied by an expression pedal or control voltage.

The controls are straightforward and intuitive. An 11-position Shift switch selects the maximum transposition interval ranging from D (Detune), a shift of 17 cents, through Minor 2nd, Major 2nd, Major 3rd, Perfect 4th, Perfect 5th, Major 6th, Minor 7th, 1 Octave, 2 Octaves and 3 Octaves. A three position toggle switch controls whether the pitch is transposed up, down or both. In Dual mode, two pitch-shifted signals are output. One follows the shift knob as if in the Up position while the other creates a harmony. Dual Mode settings include M3 up + P5 up, P5 up + 1 Oct down, 1 Oct up + 1 Oct down and many others. A Blend knob controls the mix of the dry signal and the effected signal, and an EXP jack enables the player to control pitch and glissando with an expression pedal.

The Latch button selects Latch or Momentary mode which affects how the footswitch and EXP input behave. In Latch mode, the footswitch toggles between effect on and buffered bypass each time it's pressed and the EXP input continuously varies pitch. In Momentary mode the effect is only on while the footswitch is depressed and when it is released the Pitch Fork goes into bypass.

In Latch mode the EXP input controls pitch shift amount, ranging from unity to the interval set by the Shift knob, and pitch varies continuously throughout the expression pedal's range. In Momentary mode the EXP input controls glissando rate for the Pitch Fork's footswitch. When the bypass footswitch is pressed, the Pitch Fork jumps from bypass to the interval set by the Shift knob. The amount of time it takes to reach that new note is the glissando rate. When the footswitch is released the pitch will return to unity at the same rate. That glissando time can vary between 4 milliseconds to two seconds depending on the heel/toe position of the expression pedal. The default glissando rate is 60 milliseconds when nothing is plugged into the EXP input.

The Pitch Fork comes equipped with an EHX 9.6DC-200mA power supply and also runs on a 9Volt battery.

*UK 230V power adapter included*
Read more
out of stock $169.90
Korg Volca Drum Digital Percussion Synthesiser (drum machine/percussion synthesiser)
Cat: 715951 Rel: 21 Mar 19 • View all Drum Machines bei %s
 
Drum machine with 16-step sequencer, 6 dual-layer drum parts, MIDI input & sync I/O
Notes: Welcome to an infinitely expanding world of sound-design. Joining volca kick and beats as the third, and most unique, drum synth in the volca lineup. The volca series is all about unique sound. Whether it's analogue, PCM, or FM, the volca series puts unique sounds into an accessible platform. And now, the series is joined by a new rhythm machine that brings yet another sonic character. It's the volca drum digital percussion synthesizer. Based on a simple trigger waveform, wave folder and overdrive are used to add overtones and distortion, and then a waveguide resonator effect brings the sound to life. The six-part DSP synth engine was designed with a completely different philosophy than conventional drum machines, and generates a wide range of unexpectedly different sounds. And of course, you can play those sounds from the volca-style sequencer.

Adding these distinctive sounds to your rhythms will revolutionarily transform your performances and productions.

Digital percussion synth with a 6-part x 2-layer structure:

The term "digital" typically brings to mind sounds that are based on PCM-sampled bass drum, snare drum, or cymbal, but the volca drum creates its drum sounds by DSP-powered analogue modelling. Oscillator waveforms such as sine wave, sawtooth wave, and noise are provided. By applying various changes to these waveforms, you can create a wide variety of percussion sounds that range from realistic to idiosyncratic, and are not limited only to drums.

The six parts each have two layers, and do not impose any rules or restrictions such as specifying which parts must be used for the bass drum or for the cymbal; all parts have the same specifications. You can freely assign your new sounds to these six parts without being limited by the conventions of a drum set. A kit consists of the six parts that you've assigned plus the waveguide resonator effect settings, and 16 such kits can be stored in memory (the factory settings contain 10 preload kits).

Distinctive sound from a newly developed DSP engine:

Each part consists of two layers. For each layer, users choose one of five types of oscillator waveform including sine wave, sawtooth wave, and HPF noise, and also choose from three types of pitch modulator and amp EG, each optimized for drum sounds. Layer parameters can be edited either individually or simultaneously, and users can also use the two layers to produce the same sound for additional thickness.

Waveguide resonator adds rich resonances:

The effect section features a waveguide resonator that's based on physical modelling, and which adds sympathetic resonances to the sound. You can choose from two types of waveguide: "tube" which adds the resonance of a cylindrical object such as a drum body or a long pipe, or "strings" which adds the metallic resonance of a string. The three knobs located in the centre of the panel let you specify the DECAY (amount of attenuation), BODY (sonic character), and TUNE (pitch). Setting TUNE to a lower value will produce a delay-like behaviour. You can take advantage of these knobs not only for sound design but also in your live performances.

16-step sequencer with a wide range of parameter automation:

The 16-step sequencer is excellent for improvisation. You can easily create patterns using the 16 buttons, each corresponding to one of the 16 steps. In addition to step recording, the sequencer also supports realtime recording in which you can construct a pattern while looping the playback. The pattern chain function lets you play multiple sequence patterns successively, so you can successively play back desired patterns of consecutive numbers. Up to 16 sequences can be connected to construct patterns with 256 steps.
Read more
 More than 10 in stock $155.31
Click for better price!
quote 715951
UDG
Cat: 340859 Rel: 05 Apr 10 • View all Schallplatten-Trolleys
 
Trolley holds 60 records & 48 CDs
Notes: Incorporating a new hidden trolley system, smooth rolling in-line wheels, electroplated zippers and integrated combination lock, the world's best selling 12" trolley bag has been reinforced and strengthened to provide you with even greater protection and durability. The Slingbag will hold approximately 65 records.
Read more
 2 in stock $155.72
Blood On The Tracks (Ultradisc One Step Pressing) (limited hand-numbered 2xLP box set + insert)
Cat: UD 1S2006. Rel: 29 Aug 19
Rock
  1. Tangled Up In Blue (5:30)
  2. Simple Twist Of Fate (4:17)
  3. You're A Big Girl Now (4:29)
  4. Idiot Wind (7:49)
  5. You're Gonna Make Me Lonesome When You Go (2:55)
  6. Meet Me In The Morning (4:15)
  7. Lily, Rosemary & The Jack Of Hearts (8:50)
  8. If You See Her, Say Hello (4:46)
  9. Shelter From The Storm (4:58)
  10. Buckets Of Rain (3:23)
 in stock $152.17
Cat: 732328 Rel: 10 Jun 19 • View all Audio- & MIDI-Interfaces
 
Premium 6-channel audio interface featuring high resolution audio recording
Notes: Connect, create, and collaborate with our six-in, six-out audio interface. Featuring high-definition recording, ultra-low latency, and flexible connectivity, AUDIO 6 brings your whole setup together. You can plug in mics, guitars, and synths, create send and return loops with effects, and control synths and drum machines. Plus, you get all the software you need to capture performances, build songs, and polish recordings - bring any idea to life.

Whether recording your next album or gigging your latest release, your focus should be on creating at your best. With pro-grade sound, gig-ready portability, and plug-and-play simplicity, AUDIO 6 lets you do just that.

AUDIO 6 works with all your mics, instruments, and headphones. You've got a choice of connections and features: 48V phantom power, MIDI in/out, and four analogue outputs with additional CV/gate control for your analogue gear. Plus, easy-to-see top panel LED VU-meters for all four analogue inputs and the main stereo output.

Whether you're a solo performer, duo, or a full band, the AUDIO 6's pristine audio quality lets you sound as good on stage as in the studio. Turn your laptop into a live rig or vocal processor, with flexible connections to fit any performance. USB bus-power means fewer cables and power supplies, plus a big volume knob on top lets you make easy level adjustments while on stage.

Two high-power headphone outputs, with individual level controls, make it easy to collaborate. Hear exactly what you're recording, in real-time, with latency-free direct monitoring that lets you blend playback and monitored audio to your liking. We've also doubled their output power - great for stage use or high-impedance headphones.

Whether at a small band session or a freewheeling modular synth jam, having a flexible set of connections lets you bring your ideas together and capture music in the moment. XLR, TRS, S/PDIF, and MIDI aren't just letters, they're ways to make music happen - and we've put these connections right where you need them.
Read more
 4 in stock $186.58
Click for better price!
quote 732328
Cat: 711005 Rel: 12 Dec 18 • View all Synth module accessories
 
60HP metal enclosure for Eurorack modules with built-in power supply
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod60 is 60HP with 1.34" (34mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod60 includes twenty (20) M3x8mm stainless steel screws and is compatible with M3 Knurlies.
Read more
 3 in stock $154.25
Cat: 718774 Rel: 05 Feb 19 • View all Handheld recorders
 
4-channel handheld recorder & 2-in/2-out USB audio interface
Notes: Versatile four-track audio recorder for cinema, music, podcasting and any other application. Easy-to-use compact design with a high-performance feature set and versatile audio I/O, all to produce professional content.

Dual Neutrik XLR/TRS combo jacks support both mic-level and +4dBu line-level. These inputs can accept balanced microphone or line level from Mixers or the FOH console. The microphone preamp includes +48V phantom power and plenty of gain for detailed recordings with condenser microphones, as well as electret type microphones. Using the stereo built-in microphones, you can capture ambient sound of the audience while recording direct from an external console, which is ideal for capturing live performances.

DR-40X allows high-quality recording with its stereo built-in condenser microphones. Every detail is captured from small whispers to loud sounds up to 125dB SPL. These built-in microphones are adjustable unidirectional microphones for recording in an X-Y pattern for tight stereo imaging, or in an A-B pattern for a more ambient recording.

The layout of the DR-40X has been revamped to be quick and easy to work with one thumb. Operations like recording, adjusting levels, deleting bad takes and adding markers are just a button press away.

Connecting to a PC using USB Audio interface mode, and DR-40X becomes a tool for voiceover work, live streaming and songwriting with studio-quality audio.

Writing down what you hear - easier said than done, but it is actually easy with DR-40X. In addition to its capability to capture crisp voice recording, DR-40X can help you with its Jump back function, variable Speed function and equalizer preset for human voice.

In addition to normal stereo channel recording and Dual Recording mode, DR-40X has "4CH Mode" that can record two different stereo feeds simultaneously. The combination of the sources are flexible; recording the built-in microphones along with a pair of external Mics such as close-up and ambient microphones, or recording the built-in Mics along with a balanced line input such as the feed from a mixer along with the sound in the room.

Film-makers and videographers often experience sudden audio volume spikes during filming. An actor could suddenly scream, or a documentary subject could do almost anything.

DR-40X has a Dual Recording mode that captures a copy of your take but at a lower level, as a safety track in case of sudden distortion. Also, Auto recording function can detect the sound input signal level and automatically start recording. The Pre-recording function with up to 2 seconds pre-record provides fail-safe protection.

Peak Reduction works in rehearsal mode or in record. Even if the sound or performance is louder than the sound check you're safe. Combined with Auto level and Limiter for preventing distortion, you never have to worry.

If you don't like the last part of a phrase you just recorded with your guitar, or if you change your mind and want to rephrase narration, the "Overwrite mode" is exactly what you need. Overwrite mode allows punch-in recording from a desired point. It is destructive editing with one level of undo.

The overdubbing function allows for Overdub Recording while playing a previously recorded file. This allows you to record other parts such as a guitar solo over a recording previously made such as at a rehearsal studio. Overdubbing creates a new file, leaving the original file unaffected, making it easy to re-record.

DR-40X support a SDXC card, which can record longer with larger data capacity. If you record one stereo file in 44.1kHz/ 16bit CD quality, 128GB card holds 192 hours maximum. In MP3/ 320kbps, it can record up to 896 hours. (that is 37 days!).
Read more
 3 in stock $154.27
Cat: 632727 Rel: 14 Nov 16 • View all Audio- & MIDI-Interfaces
 
2-in/4-out high performance USB audio interface
Notes: iD14 delivers the audio performance of a large format console in a compact and elegant desktop package. iD14 provides a pair of world-class Audient console mic pres, class-leading Burr Brown converter technology, console style monitor control, JFET D.I and the revolutionary ScrollControl. With its versatile feature set and intuitive layout, iD14 will become the hub of your studio in no time.

The professional sound you deserve:
We are the only company that use the same Class-A mic pre design throughout our entire product range, whether you're in the studio with an Audient console or on the road with iD14, you're always guaranteed the same world class Audient sound. Developed by design legend David Dearden and optimised over 18 years of refinement, our mic pre is used by thousands of professional studios around the world. With its versatile nature and smooth tone, the iD14 will quickly become your 'go to' mic pre.

Brilliance on the inside enables brilliance on the outside:
iD14 provides you with high performance AD-DA converters from Burr Brown, the leaders in converter technology. Quality in the analogue stages of design comes from years of experience as analogue console designers, and when coupled with outstanding converter technology it enables you to hear audio as it's supposed to sound. The importance of converters should never be underestimated. Experience audio the Audient way. Brilliance on the inside enables brilliance on the outside.

Simply scroll to control:
Get hands on control of your software with iD14's ScrollControl. With a touch of a button iD14's volume encoder becomes a virtual scroll wheel that allows you to adjust DAW hosts, plug-in parameters, iD14's mixer app and even scroll through your iTunes library - just like you're adjusting a piece of hardware. Wherever your mouse pointer hovers, the iD knob can scroll to control!

Plug in and be inspired:
As well as offering you 2 channels of mic pre, iD14 has a harmonically rich JFET D.I input. Designed to replicate the input stage of a classic valve amplifier, you can plug your guitar, bass, keyboard or drum machine straight in and start recording instantly.

Customise your control surface:
It gets even better! When not using the virtual scroll wheel, the iD button can be assigned to control iD14's monitoring features. Following in the footsteps of its critically acclaimed big brother iD22, we've still included DIM, CUT, Polarity Reverse, Mono Sum, Talkback and Cue Mix monitoring, all of which can be assigned to the iD button.

Grows with your needs:
Need to track drums? No problem! As your system grows, iD14 can be expanded via the optical input connector, supporting both ADAT and S/PDIF. Enabling you to expand up to ten inputs via an eight-channel mic pre, such as the ASP800.

Discover just how simple it can be:
We understand the need to keep things simple and iD14's mixer app was designed with that in mind. Whether you're creating low latency cue mixes or utilising the flexible monitor control, iD14 tightly integrates the hardware and software making the recording process easy. Enabling you to concentrate on what's really important - the music.

Quality deserves protection:
iD14 has been designed to last, from its all-metal construction, hand finished aluminium knobs and high grade component selection, iD14 will stand up to countless late nights in the studio and days on the road.
Read more
 3 in stock $186.58
Click for better price!
quote 632727
Cat: 677372 Rel: 28 Mar 18 • View all Studio-Kopfhörer
 
Premium closed-back circum-aural portable headphones with carry case
Notes: Listen Professional circum-aural closed back headphones are the essential work tool for music production. Their tonal balance and precision in terms of audio spectrum make them perfect to evaluate the sound work quality. In addition, their comfort and accessories will make them very attractive for people travelling on business trips. The sound quality and the dynamics of these headphones are very surprising considering that this quality is usually found on more expensive items. The attention to detail of these headphones can be also shown thanks to the various patents and technologies which belong to Focal. Hence, a brand-new driver membrane was developed. The main goal was to propose a solution which would keep all the dynamics from the original track while reproducing accurately every single detail on the whole audio spectrum. Even if Listen Professional headphones are closed, they produce a very lively sound, giving the feeling of semi-open headphones while still providing the isolation of closed headphones.

Focal's core expertise:

The speaker driver has been given a 100% Mylar suspension, whereas the central dome is composed of a Mylar-titanium alloy to provide more rigidity and extended frequency response in the upper end of the spectrum. Thus, the moving part is extremely light, enabling the transducer to exceed 40kHz on a flat baffle. The reproduction of the bass and sub-bass registers also received a great deal of attention. The team of engineers managed to combine two factors which are hardly compatible: a tuning frequency which is as low as possible and extremely low distortion (0.3% at 1kHz - 100dB).

Ear cushions - the ideal acoustics:

The size of the ear cushions (height, width and depth) gives them a volume which makes it possible to achieve a great tonal balance. Microfiber provides a more linear bass response providing a better acoustic output, whereas the acoustic tissue, which is closer to the speaker driver, offers great absorption and linearity in the 3-9kHz register. The bass and lower mid-range sections benefit from remarkable tonal balance and excellent articulation: where compression and frequency response generally suffer on closed-back headphones.

For a frequent and intensive use:

Listen Professional is also equipped with a headband boasting a unique design to ensure comfort and durability. Its curve remains consistent, regardless of the shape or size of the user's head. Combined with the layer of silicone underneath the headband, this ensures that the weight is spread out evenly over the head, preventing the user from feeling any pressure in certain areas, which can be very uncomfortable during long working sessions. The horizontal and vertical rotation of the ear cups operate thanks to one single part: a joint integrated into each one. The ear cups also feature a black structured covering, making them resistant to impacts and scratching.

Provided Accessories:

Rigid carrying case. Thermoformed shell in the shape of the headphones. Can store one cable and an iLok key (not provided), all within its compact dimensions. Two OFC copper 24AWG cables with a very low resistance.

- 5m spiral for domestic use
- 1.2m cable fitted with a 3.5mm stereo jack connector
- 3.5mm and 6.35mm jack adapter
Read more
 4 in stock $170.94
The Albums (limited 180 gram vinyl 25xLP box set)
UMC
Cat: 470280 9. Rel: 13 Feb 17
 
Rock
  1. Bon Jovi
  2. 7800 Fahrenheit
  3. Slippery When Wet
  4. New Jersey
  5. Keep The Faith
  6. These Days
  7. Crush
  8. Bounce
  9. Have A Nice Day
  10. Lost Highway
  11. The Circle
  12. What About Now
  13. Burning Bridges
  14. This House Is Not For Sale
  15. Blaze Of Glory
  16. Destination Anywhere
  17. Extras
 in stock $168.85
Cat: 569573 Rel: 23 Sep 15 • View all Synth modules
 
Liquid filter Eurorack synth module
Notes: Ripples delivers a classic, big-sounding analog four-pole filter in a small 8-HP package, continuing Mutable Instruments' lineage of warm and tasty filters started by the Shruthi SMR4 mkII and 4-Pole Mission.

3 filter modes are available: 2-pole band-pass, 2-pole low-pass, and 4-pole low-pass.

Self-oscillation is available for all modes and produces a clean sine-wave on the LP4 output. Unlike many classic 4-pole designs, this filter does not suffer from "loudness drop" when resonance is increased. The resonance loudness compensation circuit brings a slight tone coloration reminiscent of the Roland SH/Jupiter filters, with a very round and "liquid" resonance.

The 4-pole low-pass output is additionally sent to a VCA. This makes Ripples a good "final stage" module for an inexpensive/space-constrained subtractive synthesis synth voice.

*For audio samples, please visit - http://mutable-instruments.net/modules/ripples
Read more
 7 in stock $150.09
Cat: 661186 Rel: 01 Nov 17 • View all Hi-fi styluses
 
Direct stylus replacement to fit the Goldring 1042 or older models
Notes: Goldring D42 stylus is designed to fit the current Goldring 1042 phono cartridge or old model 1040, a direct replacement when your stylus is worn - saving the cost of buying a whole new cartridge. Goldring cartridges generally last many hours until the stylus needs replacing. An indication of wear is a "duller" sound.

Simply remove your current stylus by carefully pulling it away from the cartridge and replace it with the replacement.

The 1042 is a record cartridge for the audiophile who demands the ultimate sonic performance from their system, together with the convenience of a user replaceable stylus. The extended groove contact of its Gyger-S diamond gives the 1042 unsurpassed resolution of the fine groove modulations, producing an exceptionally detailed, smooth and musical sound.

Replacement stylus: 1042 - D42
Read more
 2 in stock $170.93
Click for better price!
quote 661186
Cat: 638394 Rel: 09 Jan 18 • View all Audio- & MIDI-Interfaces
 
Monitor controller & USB audio interface with 2 mic preamps, 3 selectable stereo inputs & 2 selectable stereo outputs
Notes: The Mackie Big Knob Studio Interface is a modern version of the original Big Knob Studio Command System, combining intuitive design with high-resolution Onyx mic preamps and seamless integration with all major DAWs. Equipped with USB connectivity, the Big Knob Studio Interface features TRS combo and 1/4'' jack input connectors, along with 1/4'' jack balanced/unbalanced output connectors and dedicated headphone outputs.

Onyx Recording/Playback:
The Mackie Big Knob Studio offers high-resolution USB interfacing with resolutions up to 96kHz. Featuring two Onyx microphone preamps, the Big Knob Studio delivers an ultra-wide gain range - up to 60dB - and award-winning sound quality.

Flexible Integration:
The latest addition to the Big Knob series provides models with unique features and a variety of I/O, ensuring that this interface seamlessly integrates within your existing setup. Suitable for a range of applications, the Mackie Big Knob Studio is equipped with dual headphone outputs, a dedicated amp-driven studio out, a true cue mix and much more.
Read more
 1 in stock $173.26
Cat: 731956 Rel: 16 May 19 • View all Synth modules
 
3-channel module for recording & playing back movements of controllers - 6HP
Notes: The FLAME "C-3 MK2" is a three-channel module for recording and playing back movements of controllers. These can be recorded with each channel's individual knob. The movements will be output as control voltages. The recording time per track is over one minute. The playback speed is adjustable. All three tracks have a common reset input. The track data remains permanently stored (battery-backed memory). The module can be globally switched to bipolar or unipolar voltage range (switch on the PCB).
Read more
 1 in stock $155.30
Click for better price!
quote 731956
Cat: 643684 Rel: 16 Mar 17 • View all Decksavers + DJ equipment covers
 
Pair of precision cut metal covers for Technics 1200/1210 MK2 turntables - stainless steel
Notes: - Precision cut metal covers that fit right over your existing set up.
- Fit perfectly snug with deck lids up or down.
- Cut-outs for the hinges.
- Four folds ensure maximum strength.
- Installing the cover is a breeze. Simply slide them over the tonearm assembly and the cover drops in place.
Read more
out of stock $152.17
The Complete Matrix Tapes (180 gram vinyl 8xLP box set + 18 page booklet)
UMC
Cat: 570957 3. Rel: 12 Jul 19
Rock
  1. I'm Waiting For The Man (version 1) (13:06)
  2. What Goes On (version 1) (9:02)
  3. Some Kinda Love (version 1) (4:58)
  4. Heroin (version 1) (8:07)
  5. The Black Angel's Death Song (version 1) (6:18)
  6. Venus In Furs (version 1) (4:37)
  7. There She Goes Again (version 1) (3:12)
  8. We're Gonna Have A Real Good Time Together (version 1) (3:21)
  9. Over You (version 1) (2:25)
  10. Sweet Jane (version 1) (5:12)
  11. Pale Blue Eyes (version 1) (6:07)
  12. After Hours (version 1) (3:01)
  13. I'm Waiting For The Man (version 2) (6:34)
  14. Venus In Furs (version 2) (5:10)
  15. Some Kinda Love (version 2) (4:03)
  16. Over You (version 2) (3:04)
  17. I Can't Stand It (version 1) (7:54)
  18. There She Goes Again (version 2) (2:51)
  19. After Hours (version 2) (2:31)
  20. We're Gonna Have A Real Good Time Together (version 2) (3:41)
  21. Sweet Bonnie Brown/It's Just Too Much (7:53)
  22. Heroin (version 2) (10:03)
  23. White Light/White Heat (version 1) (9:26)
  24. I'm Set Free (4:47)
  25. We're Gonna Have A Real Good Time Together (version 3) (3:15)
  26. Some Kinda Love (version 3) (4:39)
  27. There She Goes Again (version 3) (2:59)
  28. Heroin (version 3) (8:27)
  29. Ocean (11:02)
  30. Sister Ray (part 1) (19:42)
  31. Sister Ray (part 2) (17:36)
  32. I'm Waiting For The Man (version 3) (5:23)
  33. What Goes On (version 2) (4:38)
  34. Some Kinda Love (version 4) (4:06)
  35. We're Gonna Have A Real Good Time Together (version 4) (3:19)
  36. Beginning To See The Light (5:36)
  37. Lisa Says (5:49)
  38. New Age (6:41)
  39. Rock & Roll (6:51)
  40. I Can't Stand It (version 2) (7:00)
  41. Heroin (version 4) (8:17)
  42. White Light/White Heat (version 2) (8:43)
  43. Sweet Jane (version 2) (4:17)
 in stock $156.34
Cat: 557510 Rel: 19 Dec 14 • View all Synth modules
 
Controller/analog sequencer module that is played by hand
Notes: Pressure Points is a controller module, an analog sequencer that is played by hand. Touching the gold plated copper wires (aka Touch Plates), you become part of the circuit, generating a gate signal (Gate OUT), a control signal proportional to the amount of pressure applied (Press OUT) and the 3 Tuned Voltages for the activated Stage.
Read more
out of stock $191.79
Cat: 566655 Rel: 13 Mar 15 • View all Schallplatten-Trolleys
 
Protective trolley bacg for the safe transportation of up to 50 12" records, extra front pocket holds 45s/headphones and DJ-needles
Notes: The new RIOT LP-TROLLEY 50 is dedicated to the passionate vinyl pros who want to conveniently travel with their records from gig to gig. Crafted from high-grade material components such as the extra-rugged Tarpaulin fabric, PVC-coated zippers and smooth rolling precision inline wheels, it can accommodate up to 50 pieces of 12-inch records and also meets the permitted carry-on luggage size of almost every airline.
Read more
out of stock $164.68
Cat: 557453 Rel: 19 Dec 14 • View all Synth modules
 
Compact voltage controlled oscillator (VCO) module specifically designed for generating SINE waves
Notes: A compact Voltage Controlled Oscillator designed for generating SINE waves, Variable wave-SHAPEs, SUB-Octaves, Oscillator SYNC and Linear FM in the analog domain.

The Sub-Timbral Oscillator is the more subtle and melodic friend to the DPO's complex harmonic lattice.
Read more
 2 in stock $186.24
Cat: 593673 Rel: 13 Nov 15 • View all Synth modules
 
Meta modulator synthy module designed to blend and combine two audio signals - 10HP wide
Notes: Evolved from the oscillator mixing section of Mutable Instruments' desktop hybrid synths, Warps is designed to blend and combine two audio signals. A variety of wave-shaping and cross-modulation methods - some of them emulating classic analog circuits, some of them purely digital - are provided by the module.

With Warps, the cross-modulated sound can be sculpted with control voltages along 4 dimensions: by controlling the amplitude and distorting the input signals, by smoothly scanning through the collection of modulation algorithms, and by adjusting a timbre parameter controlling the brightness/harshness of the modulated signal.

Since many classic cross-modulation effects work best when the carrier is a simple waveform - for example, a sine wave for ring-modulation or a buzzing waveform for vocoding - Warps includes a digital oscillator offering a handful of classic waveforms. This internal oscillator, which tracks V/Oct and supports through-zero FM, will replace the carrier audio input - freeing up one oscillator in your system for other duties!
Read more
 4 in stock $195.95
Click for better price!
quote 593673
Cat: 499540 Rel: 01 Aug 13 • View all DJ-Controller
 
Compact DJ controller designed for flawless Traktor integration
Notes: Already the standard for performance DJ controllers, the mighty Traktor Kontrol X1 delivers as much power as portability controlling Traktor decks and effects. Whether DJing all-digital, or using time code control, the new X1 now delivers added instant control over all essential DJ functions on 2 track decks for seamless command of Traktor software and a design that feels instantly familiar.

A new tactile touch strip brings you closer to the music without ever having to reach for your turntable or CDJ -perfect for quick, precise nudging, track seeking, or loops and effects control.

Traktor Kontrol X1's eight knobs and buttons control up to three effects on two of the four effect units. An ultra-intuitive layout puts browse, cue, sync, and loop controls right where you need them while touch-sensitive browser and loop controls provide smart software navigation. Pro-grade, RGB back-lit buttons and displays give instant visual feedback during your set - direct, fluid communication with TRAKTOR PRO or TRAKTOR SCRATCH.

On the fly remixing has also never been easier as direct access to Traktor's Flux mode now allows you to juggle cue points and loop effects without missing a beat.

Take physical control of your music with or without turntables or CDJs. Traktor Kontrol X1 now includes a multi-purpose touch strip that delivers ultra-precise command over track position, pitch bend, and even FX at the swipe of a finger. Digital displays and LED indicators provide visual feedback so you know where you stand when the night is in full swing.

Control one or both decks simultaneously. From nudging or needle dropping, to quick access playback functions like track seeking or loop length, the touch strip's default settings instantly adapt to match your needs - your fingers do the rest.

Boasting reactive performance behaviours, Traktor Kontrol X1 takes care of the details behind the scenes. The advanced Browse and Loop encoders respond to touch and command TRAKTOR to access different views or functions - just touch the Browse encoder to see the full-sized Browser list. Touching the Loop encoder while holding SHIFT+PLAY lets you see the key of your track. Touching the Loop encoder while holding SYNC lets you see the tempo.

The touch strip also interprets functions based on deck status - when stopped, it's assigned to track seeking or needle dropping. When playing, pitch bend is activated. For your own trademark sound, assign the touch strip to control any effect parameter in seconds.

Traktor Kontrol X1 features smooth, ultra-precise buttons and knobs - all pre-mapped for instantaneous setup, keeping you laser-focused on performance.

Whether you're looking for a effective tool to boost your creativity or a stylish one-stop solution for maximum portability and power, the next generation X1 ticks all the boxes.
Read more
out of stock $165.73
Cat: 621126 Rel: 22 Aug 16 • View all DJ-Controller
 
Professional DJ controller with hi-res LCD multi-function displays on each jog wheel & 4-deck capability - Serato DJ Intro included
Notes: The Highly-Anticipated Mixtrack Platinum DJ controller.
Setting the pace as the world's leading innovator of DJ equipment and technologies, Numark presents the Mixtrack Platinum DJ controller. This latest addition to the Mixtrack Numark family series enhances the performance of any DJ, from skilled amateur to the most advanced professional.

Mixtrack Platinum offers a host of great features, such as a built-in custom LCD display screen in each 5" capacitive jog wheel, 4-channel mixing capabilities, Filter and gain controllers for each channel, Effects, and 24-bit audio output. Yes-we know with all these amazing features are incredible: it's like listening to a new song that you know is going to be platinum!

Platinum Hi-Res Display
As you play your hits, Numark provides an awesome feature that takes you into a new dimension with the Mixtrack Platinum: The custom 1.75" displays offer a colourful hi-resolution display enabling you to monitor information on bpm, platter position, time remaining, key lock, pitch adjustment, and keylock. (Ok-you can thank us later.) You can also switch between four decks and control which deck is active while creating a platinum mix.

What's the advantage of the display screen? You not only have the ability see your bpm and needle drop without looking at the laptop, you will also focus more on your performance without distraction.

The place is hot. The action is non-stop. You're the one in the driver's seat. We make sure you have the horsepower to get it done. Mixtrack Platinum will never let you down. We've kept everything you loved about the Mixtrack Pro 3, but now there's even more.

Mix With 4 Decks
You have a 4-deck layering advantage with the Mixtrack Platinum, and you can create a full digital mixtape or perform a Platinum mix. The new deck select function enables you to switch to the desired layered deck, giving you limitless possibilities to mix in loops, a capella's, and blend in songs seamlessly. You can monitor which deck you are on in the new custom 1.75-inch displays built into the jog wheels.

No Limits on Your Creativity
Dive into our 16 multi-function backlit performance pads and add loops, launch samples, and control hot cues to your performance. Use the multi-function touch strip for dynamic FX control and track search operation. There are dedicated filter knobs for each channel, to give you just the exact amount of tonal control you need for that perfect sound. If you can think it, Mixtrack Platinum will do it and take your creativity beyond to new heights.

We give you 100mm pitch sliders that make it easy to perform even the finest pitch adjustments, so it's easy to keep two cuts in perfect beat sync without any drift.

Jumpstart your inspiration with 6 sample packs from Prime Loops including over 380 premium instrumental loops, drum kits, one-shots, and more. A $200 value.

Remix with the sounds of the world's premier electronic music label. Mixtrack Platinum gives you exclusive access to download studio-grade audio stems from the Toolroom Records catalogue, allowing you the freedom to layer, tweak and chop today's most relevant sonic textures.

Made With Platinum Touch
Get precise control over every track and every transition with Mixtrack Platinum advanced low-profile rugged metal platters. Utilizing exclusive Numark technology, they are capacitive and dual-zone, giving you the ability to scratch or stop a track simply by touching the top of the platter, while at the same time allowing you to adjust the pitch by manipulating the platter from the side. The touch control is also intelligent, sensing your every motion and touch to ensure solid, reliable operation no matter how hot it gets! No other brand of controller has platters like these - only Numark! In addition, they're made from heavy-duty metal, so they stand up to the hottest action, night after night.

Total Serato Control
Mixtrack Platinum gives you comprehensive control over its included Serato Intro software. Plus, it's class-compliant with both Mac and PC, so you'll be able to plug in and start mixing your music right away - no drivers or complicated set up necessary.

Serato DJ Intro
Simply plug-and-play - Serato DJ Intro and Mixtrack Platinum take the hassle out of setting up: connect your speakers to your Mixtrack Platinum and connect your Mixtrack Platinum to your laptop - it's that simple.
Read more
Gespielt von: Ju
 1 in stock $182.41
Click for better price!
quote 621126
Cat: 584896 Rel: 16 Sep 15 • View all MIDI converters & accessories
 
1 MIDI in to 25 MIDI thru sockets, works for ALL MIDI messages including Clock, SysEx, MTC etc
Notes: Receives MIDI data from a single MIDI OUT (e.g. sequencer or master keyboard) and produces identical copies at the 25 MIDI THRU sockets. These can then be connected to the MIDI INs of sound modules or other devices which require MIDI signals sent to them.

High quality Kenton MIDI Thru box with opto-isolated MIDI In and separate drive for each MIDI Out. Powered from a mains adaptor (wall wart) so you can fit and forget.

PLEASE NOTE: Comes with UK 3-pin power supply
Read more
 2 in stock $167.81
Click for better price!
quote 584896
Cat: 584259 Rel: 15 Apr 16 • View all Synth modules
 
High quality quad linear voltage controlled amplifier (VCA) synthesiser module - 8HP wide
Notes: 'Tangle Quartet' is a high quality quad linear voltage controlled amplifier (VCA) providing individual level control of 4 signal inputs with both individual outputs and a combined 'mix' output (for non patched outputs) . Control signal inputs and associated attenuation controls allow for voltage control of signal levels. Control inputs are normalised to 5v thus providing manual mix control in the absence of control signals.

Technical Specifications:

Supply: +/-12V (Reverse voltage protection)
Current Draw: ~80ma
Size: 8 HP
Depth: 32mm (including power header)
Read more
 5 in stock $167.81
Click for better price!
quote 584259
Cat: 679163 Rel: 09 Mar 18 • View all Synth modules
 
Eurorack recreation of classic sampler filter with added resonance & voltage control
Notes: 'MUM M8' is an 8hp Eurorack low pass filter building on the filter design used in the classic Akai S950 12 bit sampler with the addition of resonance, voltage control, clipped saturation and a dedicated VCA.

The low pass filter gives the recognisable super smooth vacuum like tone sucking sound which works magic on complex sources. The addition of clipped overdrive and intentionally aggressive self-oscillating resonance compliment the smooth filter core by juxtaposing it into more wasp like territory with acidic squeals and a more gritty sound.
Mum M8 features dual voltage control with attenuation (and inversion) of filter cut off and voltage control of resonance together with dual audio inputs - one of which includes a VCA to with the capability to aid overdriving signals into the filter core.

The filter core is a 6th Order Butterworth switched capacitor type design featuring an analog core but controlled by a high speed digital clock. This produces the characteristic smooth sounding filter but, as with the original S950, has a relatively high minimum cut off as to avoid 'clock bleed' into the filter output from the digital control. This minimum cut of point (and introduction of bleed if required) can be controlled via trimmers on the rear of the module (see calibration chapter). It is not unusual for there still to be some low-level artefacts from the clock present, particularly during filter sweeps - these add to the filters character.

The motivation for the module came from discussing filters in classic samplers with the artist Jack Adams - aka Mumdance. Jack suggested investigating the S950's filter well known as for it use in classic use in early jungle and hardcore. From that point onward Jack provided inspiration, help and feedback in the development of the filter. Big up Mumdance.
Read more
 1 in stock $185.52
Click for better price!
quote 679163
Cat: 666629 Rel: 18 Oct 17 • View all Effects pedals
 
High-fidelity delay, reverb & looper unit
Notes: Designed and developed over two years, in collaboration with Devin Townsend, the Ocean Machine is a high fidelity professional Delay, Reverb and Looper unit which brings together the best available hardware on the market and very complex algorithms to create lush, heavenly effects. MOOER has worked very closely with Devin Townsend to meet all of his own personal requirements while also ensuring that the "Ocean Machine" is versatile and enjoyable for musicians from all walks of life.

A multitude of programmability and control options makes the ocean machine ideal for all different kinds of guitarists from bedroom beginners to industry professionals and is easy to integrate into all different kind of setups. MOOER has brought all of this together into a small, stylish and highly competitive, cost efficient package.
Read more
 2 in stock $193.86
Click for better price!
quote 666629
Mooer Red Truck Combined Effects Pedal (effects pedal & carry case)
Cat: 666627 Rel: 19 Oct 17 • View all Effects pedals
 
6 effects pedals built into 1 simple unit - featuring Boost, Overdrive, Distortion, Modulation, Delay & Reverb
Notes: The MOOER 'Red Truck' is an all in one solution for the professional guitarist on the go. Following diligent research Mooer have integrated a combination of the most commonly used and desirable effects pedals into one, simple to use, floor unit.

The all analogue Boost, Overdrive and distortion circuits provide lush warm tones. A fully comprehensive collection of high quality digital effects including Modulations, Delays and Reverbs with Tap tempo control provide spacious and ambient atmosphere via the stereo outputs. A highly visible and precise tuner will make sure you are always in tune on stage.

A built in parallel effects loop makes it easy to use with your favourite stompboxes or connect to your favourite amplifiers using the 4 cable method. The Red Truck has stereo outputs and a dedicated Mixer output with speaker simulation for direct connection to your favourite mixing board or audio interface. All the parameters and functions are laid out in front of you just like a traditional pedalboard. Easy to view and adjust on the fly.

The Red Truck is compact and easy to transport with the tidy soft-case included in the box. No matter where in the world you are going to play and what you need to connect to you can always take a fully professional pedal effects rig with you with ease.

PLEASE NOTE: PSU NOT INCLUDED
Read more
 2 in stock $185.52
Cat: 742281 Rel: 08 Aug 19 • View all DJ cartridges
 
AT-XP7 cartridge pre-mounted on the AT-HS6BK headshell
Notes: The AT-XP series cartridges provide a high-quality sound for vinyl DJ's. Offering all of the features of a DJ cartridge, but with a Hi-fi sound, the XP series are perfect for the stage and club DJ who prioritises sound quality.

- Audiophile DJ cartridge AT-XP7 pre-mounted on the AT-HS6BK headshell
- VM dual magnet construction
- Durable robust design for high-quality specialist DJ playback
- Tapered aluminium cantilever providing outstanding rigidity
- Compatible with the replacement styli ATN-XP3 and ATN-XP5 as well
- Configuration with single cartridge (AT-XP7). The replacement stylus (ATN-XP7) and a headshell bundle, consisting of the replacement stylus and the headshell AT-HS6BK (AT-XP7/H) are available separately
Read more
 3 in stock $165.73
Click for better price!
quote 742281
Goldring 1006 Cartridge & Stylus (cartridge & stylus)
Cat: 649671 Rel: 08 May 17 • View all Hi-fi cartridges
 
Moving magnet cartridge & stylus
Notes: The Goldring 1006 record cartridge is designed for owners who want to get the very best from their systems at an affordable price. This cartridge has an elliptical tip for improved high frequency clarity and a powerful magnet to ensure high sensitivity.

Read more
 2 in stock $154.25
Click for better price!
quote 649671
Cat: 614712 Rel: 20 Jun 16 • View all Synth module accessories
 
Eurorack synth module case, with built-in power supply - 84HP wide
Notes: Desktop Eurorack moduile case 3U - 84HP with power supply on the left side.

Plexiglas side panels 5mm thick.

Aluminium chassis.

6cm deep, but only 4cm deep all along the 5HP of the power supply. Check your modules before!

Tech specs:
- Width : 84HP
- Depth : 6cm
- Depth all along the 5HP of the power supply : 4cm
- Current Consumption : +12V : 2.4A ; -12V : 1.2A ; +5V : 0.5A
Read more
out of stock $174.07
Cat: 492001 Rel: 17 Jun 13 • View all Studiomonitore
 
Active nearfield monitor with 6.5" cone woofer and 1" dome tweeter
Notes: This second generation of 'HS' nearfield reference monitors, like their predecessors, share the same design philosophy as the legendary NS-10M studio monitors - Providing accurate signal reproduction and superior sonic performance.

The Yamaha HS7 employ a new, highly efficient tweeter providing an extended high frequency range up to 30KHz. The matching HS8S 150W powered subwoofer provides an extend bass when a well defined bottom end is required.

A low resonance enclosure built using a three way mitre joint technique ensures that the corners of the speaker are firmly anchored leading to dramatically improved durability and the elimination of unwanted resonances that can colour the original sound. Yamaha's 'Vortex Sound Control' technology is deployed to decrease unwanted airflows around the speaker ports. This in turn reduces audible noise by up to 6dB.

Product video: http://www.youtube.com/watch?feature=player_embedded&v=Dvj3StP4fVE
Read more
 4 in stock $162.60
Cat: 588824 Rel: 02 Oct 15 • View all Synth modules
 
2 pole multi-mode filter synthesiser module - 4HP wide
Notes: MMF is a 2 pole Multi-Mode Filter in 4 HP. It has simultaneous LowPass, BandPass and HighPass filter outputs.

MMF will self oscillate into a nice sine wave and track 1V/octave. The Resonance is voltage controllable.

The PING input is for a gate or trigger, and generates a fast decay envelope with a nice sound, reminiscent of a vactrol filter, but without the vactrol. PING can normal to the FM jack, or go direct (switchable behind the panel).

The FM input is connected to an attenuverter pot to give you control over the signal.

Power Draw: +62mA, -24mA. 4HP Width. 25mm Depth.
Read more
out of stock $164.68
Cat: 695711 Rel: 09 Oct 18 • View all MIDI-Controller bei Juno
 
USB control surface featuring new design for easier & faster control of your DAW
Notes: The latest generation of PreSonus classic USB control surface, the FaderPort enables you to record and mix with a smooth, touch-sensitive, motorized, 100 mm fader; transport controls; and many of the new workflows introduced in the FaderPort 8 and 16. Manage markers, punch in and out with a footswitch (not included), arm tracks, and employ the innovative Session Navigator to control your favourite DAW application quickly and easily. The FaderPort connects via USB 2.0 and offers native control of PreSonus Studio One DAW (Studio One Artist is included), including Control Link support and parameter follow, allowing quick hardware access to any control.
Read more
 1 in stock $161.56
Click for better price!
quote 695711
Cat: 575544 Rel: 19 Jun 15 • View all Microphone accessories
 
Acoustic treatment that isolates your microphone from the external environment, fits most large diaphragm condenser microphones
Notes: Professionally record your vocals anytime, anywhere, simply by placing the Eyeball on your microphone.

The Eyeball is acoustical treatment that isolates your microphone from the external environment. Rather than treating your surroundings, the Eyeball is designed to target the two most important variables in the recording process: your voice, and the microphone. By focusing your voice to an isolated microphone, the Eyeball is able to capture the complete spectrum of your voice and reduce much of the external environment, all the while giving you clear and concise vocals free of any coloration. Creating your ideal recording space is as easy as placing the Eyeball over your favorite microphone.

Control Your Sound:
Captures your pure vocal tone without any coloration

Cut back on mixing:
Lessens the need for excess equalization and post production processing

Integrated Pop-Filter:
Includes a built-in, detachable pop filter

Reduce Ambiance and Reflection:
Isolates and treats your space while reducing the external environment

*Please note - microphones shown in product images are NOT included*
Read more
 2 in stock $178.36
Artikel 1 bis 50 von 846 auf Seite 1 von 17 anzeigen
1  2  3  ...  17  »

Filter

Saved Searches
Save current search
Release Date
Close