Protective dust cover specifically designed to fit the Roland TR707
Notes: Cult vintage drum machines like Roland's TR-707 and TR-725 are becoming very rare units, especially in pristine condition. For one to come to any harm doesn't bear thinking about! The studio elements of dust, smoke and liquid have taken many a good unit down over the years - this is where Decksaver steps in. Precision trimmed for perfect fit whilst accommodating cables, the TR-707 can sit ready for operation. These beautiful machines are without doubt an investment worth protecting as prices continue to soar.
Tidal modulator signal generator Eurorack synth module - 14HP wide
Notes: Tides is all about waves that go up and down, from minute-long cycles to audio rates... This module is Mutable Instruments' unique take on the looping AD envelope generator - pushing this well-known trope to unknown territories.
The core of the module is a digital asymmetric triangle function generator, which can be used in AD and AR modes (for envelope generation), or looping (as a VC-LFO or VC-DO). The triangle generator is followed by a wavetable waveshaper providing linear, exponential, logarithmic, sinusoidal, or arc-sinusoidal shapes for the A and D segments. Then, a second processor applies either a 2-pole low-pass filter to the waveform, smoothing its sharp edges; or a rubbery wavefolder, adding kinks and "bounces" to the waveform. Because Tides has been designed from the ground up to work at audio rates with minimal aliasing, and because all its parameters are under voltage control, it can be used as a unique self-contained synth voice.
Tides' advanced features include:
- Output level CV input (digital VCA).
- Dual outputs: standard unipolar waveform, and "double-shot" waveform with a positive spike during the ascent and a negative spike during the descent. At audio rate, both of them have a different sound.
- Accurate V/Oct tracking with straightforward calibration procedure.
- Freeze input to temporarily hold the waveform.
- Clock input to lock onto a multiple or fraction of a trigger sequence... or audio signal, PLL-style.
Deluxe windshield for use with NTG1 and NTG2 shotgun microphones
Notes: The Rode WS6 Deluxe Windshield is designed to reduce wind noise when recording in adverse environmental conditions. It is suitable for the Rode NTG1 and NTG2, as well as any shotgun microphone with a maximum slot length of 160.5mm (6 1/4") and a diameter of 21-22.5mm.
Notes: The Numeric Repetitor is a rhythmic gate generator that describes rhythms as binary numbers and then multiplies by other numbers. With a concept similar to the Zularic Repetitor, the Numeric Repetitor is a voltage controlled rhythm generator.
Clock is sent to the Beat input. With the Prime potentiometer or a CV you can select one rhythmical pattern based on 16 mathematic factors. With a switch you can select between 2 sets of patterns, X and Y.
The gate pattern is available at the Prime output, variation of it at outputs Factor 1, 2 and 3. Each of the variations can be offset in time with the Offset potentiometer or CV, which can generate great rhythms. Each channel has a LED which visualizes a gate.
The Measure input or the button allow you to reset the pattern.
25 key illuminated MIDI keyboard with smart sensor technology
Notes: The world's most playable, portable and powerful MIDI keyboard controller. Make music on Mac/PC and iOS/Android, or take control of analog gear via 5 pin MIDI or CV.
The next generation portable keyboard controller is here.
QuNexus re-imagines the portable MIDI keyboard with 25 vividly illuminated, touch sensitive keys that are uniquely interactive and fun to play. Featuring huge performance capabilities in a tiny footprint, QuNexus gives artists and students unprecedented expressive control with smart sensor technology that transmits pressure, tilt, polyphonic aftertouch and velocity.
Highly portable and USB powered, QuNexus lets you perform or compose new songs wherever and whenever you like. Just load your favorite software synths and piano apps on to your iPad or laptop and jam away in the park or on the go! QuNexus requires very little power and will play all day with an iPad or laptop.
QuNexus is class compliant and works natively with iOS, Android, Mac OS, Windows, and Linux with no additional software drivers required. QuNexus connects to iPads with Apple's Camera Connection Kit or to Macs and PCs with the included USB to Micro USB cable.
Pros are loving the expressive power of polyphonic aftertouch, channel rotation, poly pitch bend, and the ability to incorporate analog synthesizers with Control Voltage (CV). Individual key pressure and tilt sensitivity open up fresh nuance-imagine pitch bend and modulation built into each key. Keyboardists report that QuNexus' unconventional keys can be played faster and more accurately than those of traditional keyboards. So, plug in QuNexus and take your synth shredding to the next level!
QuNexus pairs very well with popular piano/music learning apps (such as Synthesia, Piano Legend, Pianist Pro, and Symphonix Evolution). Its portability, interactive light up keys, and easy integration with iOS apps make QuNexus a natural fit for students and beginners.
Nearfield studio monitor stand with 5 adjustable height positions and incorporated cable management
Notes: Famous throughout the world for its vast line of stylish near-field monitor stands, Quik Lok is now introducing its latest design, the new state-of-the-art BS402 monitor pedestal.
All-steel, arc welded construction (no fibre or chipboard is used), the BS402 is an ideal mix of beauty and strength.
Designed with a solid triangular base with adjustable levelling floor spikes to enhance stability, and a sturdy metal top plate that will safely and steadily support most size monitors up to 57 kg (125 lb).
Height adjustable to anyone of 5 height positions from 78 to 112 cm (30.7" to 44"), the BS402 stand is also incorporating cable management clips to neatly accommodate speaker and power cords.
Perfect for home, project or professional recording studios, the contemporary style of our BS402 will enrich and add a classy touch to any kind of environment.
Storage and carry bag for one regular sized speaker stand
Notes: The Bag-90 by Ultimate Support is the perfect addition to your gigging rig! Each Bag-90 holds one of our regular sized speaker stands, including the TS-100B, TS-90B, TS-80B/TS-80S, and TS-70B. It is a heavy-duty tote bag with a reliable zipper and enhanced pulls. The Ultimate Support Bag-90 also features two strong, durable hand grips that velcro together to give you added carrying strength and comfort.
Microphone boom arm adapter and ulti-boom for use with APEX AX-48 pro keyboard stand
Notes: Have you ever wished your keyboard stand and microphone stand were the same stand? Tired of trying to figure out where to put your mic stand when playing keyboards? This extremely convenient boom adapter and boom arm is for use with the APEX AX-48 Pro keyboard stand. Simply detach the accessory compartment lid on the top of the APEX AX-48 Pro, snap this microphone boom adapter into place, tighten the two bolts (Allen wrench included), and attach the included Ulti-Boom boom arm and you're all set!
We know how difficult it can be to perfectly place a microphone when playing keyboards - especially if you're playing two keyboards. The AX-48 Pro Mic Boom is a great addition to the APEX AX-48 Pro keyboard stand. Combine the two and you have a legndary keyboard stand with two teirs and one of the finest telescoping mic stands ever designed - all in the same stand!
You'll be able to add this mic boom to your APEX AX-48 Pro quickly and easily. It takes just minutes to install the AX-48 Pro Mic Boom. Simply remove the accessory cap on top, pop in the adapter, tighten the two bolts using the included Allen wrench, and attach the Ulti-Boom boom arm. It really is that easy!
When it came time to design a new generation of microphone boom arms, Ultimate Support decided to throw known conventions out the window and give way to innovation. Welcome to the Ulti-Boom professional microphone boom arm. The Ulti-Boom mic boom arm features a heavy-duty, die-cast counterweight, ergonomic adjustment knobs that feel great in your hands, and lightweight (yet durable) anodized aluminum tubing with internal glides that ensure fast, smooth, noise-free adjustment. Ulti-Boom by Ultimate Support has redefined how professional boom arms should perform.
Active studio monitor with KRK custom designed 8" Kevlar woofer & 1" Kevlar tweeter - white edition
Notes: KRK Systems V Series 8 nearfield studio monitors are specifically designed for audio production applications where accurate reproduction is critical. KRK worked with hundreds of pro engineers/producers/mixers to develop these ground-breaking monitors. Recording and broadcast studios as well as sound design and audio production houses will benefit from adding the V Series 8 as the go to monitor of choice.
V-Series 8 includes 49 user selectable EQ settings to ensure proper setup for room acoustics and placement anomalies as well as taste and individual preference. The KRK design team has painstakingly modelled and analysed hundreds of monitor placement and room acoustic situations to ensure that KRK delivers the most useful tools with minimal adjustments.
Notes: Mother's Little Helper is a companion module intended to be used with the Moog Mother32 semi-modular synthesizer. The MIDI out port allows CV/Gate control of Bank and Patch, changing the assign output, and allows turning on/off the MIDI controlled sustain ability of the Mother32. In addition, a Sample & Hold circuit has been added that is designed to be gate driven.
Notes: This unique metal screen is not simply perforated but implements a slightly convex shape to redirect low-frequency air blasts to the side of the screen. This process does not attenuate high frequencies (as fabric screens can) and leaves the vocal performance completely unaffected, minus any disruptive low frequency "pops".
The gooseneck holds its position at any angle, keeping you covered at all times. And since the whole thing is made of metal, it will take a lot more abuse than a traditional fabric shield. This tool is built to last.
Additive interval pitch sequencer for turning triggers into melodies - 6HP
Notes: In a slim 6HP format the Rebel Technology Tonic offers one adjustable and five fixed intervals. Each interval has a trigger input and manual trigger button. Freely combine intervals for more than four octaves chromatic range.
The bottom interval is negative, the middle four are positive. The top, adjustable interval has a range from minus one half octave at fully counter-clockwise, to plus one octave at fully clockwise, with zero in the middle.
The default tuning gives you whole tone steps: +2, +4, +8 and +16 semitones. The bottom, negative interval drops the pitch by a semitone. This provides a basic range of 32 semitones, not counting the adjustable interval.
The module is entirely analog, each interval can be tuned using the 23-turn precision trimpots on the back of the module.
Notes: The Rakit Metal Synth has a Polivok's inspired filter at its core. It uses this, along with a punchy AD envelope to produce a variety of percussive sounds from shaped noise.
It was designed to be a companion to the Rakit Drum Synth and as such creates a range of mad/interesting sounds and some very useful metallic sounds.
How it Works:
The synth is triggered by a piezo disc which is sensitive to how hard you tap the top panel giving subtle differences in the two stage envelope.
The noise is generated digitally by a pre-programmed microcontroller. The filter at the heart of the unit can be controlled and modified by the Sweep, lowpass/bandpass, Resonance, Cutoff and Cutoff CV.
2x Trigger Options:
Trigger by activating the piezo under the touchpad (Metal Logo) or by plugging in an external trigger.
Powering The Unit:
The Metal Synth comes with a 9V pp3 battery to barrel jack connector as standard. We recommend using an alkaline battery, this is not included.
Should you wish to use your own power supply, please ensure it meets the following specifications:
+8V to +12V, Centre positive 2.1mm (centre) x 5.5mm (outside)
… Read more
$69.62 SAVE 10% 5 in stock$62.66
Artikel 1 bis 19 von 19 auf Seite 1 von 1 anzeigen