Today Only: Studio Equipment sale vinyl

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: Wow. Oscillators don't come much more special than this. Two contrasting, fully independent VCOs with waveshaping and complex cross-modulations, plus the 'Thru Zero Trinity' of FM, phase and amplitude modulation. Beautiful.

Supplier's Notes:
Thru Zero Complex Oscillator

A new complex oscillator, featuring two independent VCO's. Both voices have a unique signal path and flavour. Complex cross modulations entangle them together, opening up completely new timbral territories.

Features include the Thru Zero trinity; Frequency, Phase and Amplitude modulation.

Each oscillator also has its own Low Pass Filter, which works great to mellow the harsher tones from complex intermodulations.

Each VCO has great tracking and temperature stability, there is no distinction between a carrier and modulator.

The FM bus lets you modulate the index of each individual voice, with linear and exponential inputs for external sources. There are also inputs for Sync in, with both soft and hard sync.

VCO 1

The left VCO signal chain starts with a shape function, that let's you morph between triangle and saw. This waveform is also available as a separate output.

Next is a sinusoidal wavefolder, which changes its response dramaticaly based on shape of the waveform. The circuit is based on a modified version of a design by Barrie Gilbert from 1977, popularized by Open-Music-Labs (used with permission).

This circuit also creates the possibility of Thru Zero Phase Modulation, here the depth is controlled with the third slider. The source is normaled to VCO 2, but external modulation sources can be patched in, and the depth can also be modulated with CV.

Lastly there's a 2-pole Low Pass Filter, before going out the MAIN output. All parameters can be CV controlled, and feature handy attenuators at the inputs.

VCO 2

The first slider is a continuous waveform shaper, that morphs from sine to tri to saw.

This waveform then enters the Thru Zero Amplitude Modulation (Ringmod) section. The slider sets the depth of modulation, with the source normalized to VCO 1. The depth can be CV controlled, and an external source can be patched as well. The result is also available on a separate output, pre wavefolder/filter (VCO 2 sine).

The third slider is a wavefolder, it's based around a novel wavefolding topology, with a unique and more aggressive sound compared to the sinusoidal folder of VCO 1.

The wavefolded signal goes into a 2 pole Low Pass Filter, and out of the MAIN output.

Dimensions
26 HP
27 mm deep

Current Draw
190 mA +12V
190 mA -12V
0 mA 5V

Notes: *** This version of UTILITIES comes with PULSAR-23 style turrets designed for connecting alligator clips. ***

UTILITIES contains a set of simple auxiliary modules to expand the functionality of the PULSAR-23 drum machine. UTILITIES modules can also be used with any gear that works with CV signals (Eurorack, semi-modular synthesizers, etc.).

The modules included in UTILITIES can be divided into two groups:
1) Passive elements such as switches, resistors, capacitors.
2) Various types of amplifiers and waveshapers, linear, non-linear, controlled and uncontrolled.
Passive elements are designed to expand the possibilities of switching and controlling the PULSAR.

Linear amplifiers are needed when you need to feed a signal from a device operating in a lower voltage format to the PULSAR inputs. For example, it can be a step sequencer with an output voltage of 5 volts, while the PULSAR needs 10 volts to fully trigger the drum modules. Or it could be the output of a cassette tape recorder, which has an output of 1 volt, while for normal operation the PULSAR needs an input level of an audio signal of 5 volts. Non-linear and controlled amplifiers and waveshapers are designed to control the signal level, while simultaneously changing its spectrum, distorting its shape and adding harmonics. The circuitry of these amplifiers is very simple and based on the early developments of the transistor era, with its inherent beauty and grace.

UTILITIES connectors are made in the PULSAR-23 format on pins designed to connect the alligator clips. There are also adapters for 3.5mm Eurorack mini-jacks.

The top panel and enclosure of UTILITIES are made of PCBs, which significantly reduced the cost of the device.

There are also adapters for 3.5mm Eurorack mini-jacks. The top panel and enclosure of UTILITIES are made of PCBs, which significantly reduced the cost of the device.

The top panel and enclosure of UTILITIES are made of PCBs, which significantly reduced the cost of the device.

Power supply: DC +12 v 5.5 x 2.1 mm center plus
Current consumption: 50 ma max
Dimensions: 288 x 193 x 40 mm
Weight: 0.75 kg

Notes: Simple, powerful and high-quality voice recording solution, ideal for interviews, videography and podcasting. Clip on the lavalier microphone and record directly into the tiny battery-powered unit in high-quality 32-bit float resolution.

Supplier's Notes:
Small Appearance, Big Impact.

Videographers love the Tascam DR-10L Pro portable recorder with clip-on microphone as an easy and unobtrusive solution for capturing audio for video. Combining the clip-on convenience of a lavalier microphone with an ultra-compact portable recorder, this form factor solves many of the problems content creators often face. It's a superior solution for busy events such as weddings and on-location film shoots.

While traditional wireless microphone systems can pose workflow concerns, the rock-solid performance of a Tascam wired lavalier recorder is proven and assured. Simple plug-and-go operation also makes the DR-10L Pro an easy backup system for your typical voice recording setup.

The DR-10L Pro's 32-bit float recording technology lets you capture a whisper, a scream and everything in between with impeccable fidelity, ultra-low noise and no need to fine-tune gain levels. Support for wireless timecode sync with Atomos products, the ability to wirelessly control up to five recorders from the app*, plus long battery life and generous storage capacity make the DR-10L Pro ideal for professional applications.

*optional AK-BT1 required for app control and wireless timecode sync

Ultra-compact and lightweight, the DR-10L Pro is the perfect solution when stealth is a priority. Fitting in the palm of your hand and weighing just 65 grams, this recorder is easy to hide at film shoots, weddings, stage performances, and other projects where invisibility is crucial.

The included belt clip attaches easily and securely to clothing, allowing you to capture great audio without compromising your talent.

Using the DR-10L Pro's standard 32-bit float recording mode, two analogue-to-digital converters (ADCs) capture sound over an enormous dynamic range without distortion or excessive noise. This means that videographers can avoid having to discard recordings due to poor levels. With 32-bit float resolution, there's no need to adjust input gain levels, so you can set up faster and be confident that you're recording excellent audio in every situation.

The included TM-10L microphone captures clear, detailed audio while handling high sound pressure levels without distortion, making it the perfect lav mic for 32-bit float recording with the the DR-10L Pro.

Whether you're recording people at a wedding reception, a busy convention or a lengthy ceremony, the DR-10L Pro is ready for service as long as you are. There's no need to worry about changing batteries during recording: the DR-10L Pro personal recorder runs on just two AAA batteries for up to 24.5 hours*.

In addition, files are saved on the microSD card approximately every 20 seconds during recording to minimise the risk of data loss due to unexpected power cuts.

*Lithium batteries

With the optional AK-BT1 Bluetooth dongle, up to five DR-10L Pro recorders can be controlled wirelessly from iOS, iPadOS and Android devices using the free DR-10L Pro CONNECT app. The app allows videographers to check device status*, view the recorded waveforms in real time and create up to five presets. A preset can be applied to a single recorder or to all controlled units at once. You can also use the app to name devices for easy identification, for example "Bride", "Groom", and so on.

With the optional AK-BT1 Bluetooth dongle, the DR-10L Pro is ready to wirelessly synchronise timecode with supported Atomos products. Timecode allows videographers to perfectly align audio with video, even when there is no audio on the camera.

Timecode is critical for videographers when dealing with multi-camera video shoots, saving valuable time in post-production.

*Audio monitoring via app is not supported

Whether you're in a dark environment or outdoors in the sun, the DR-10L Pro's highly visible OLED display lets you confirm settings at a glance.

You can check your battery level, recording status, and input levels directly from the display, and all advanced functions are just a few button presses away.

The DR-10L Pro lavalier recorder has a headphones output for easy monitoring. You can listen to the input before or during recording, and also check the quality of your recordings immediately without having to first transfer them to a computer.

The DR-10L Pro comes bundled with a free version of RX Elements, a groundbreaking audio repair and noise reduction tool from iZotope. RX Elements gives videographers powerful audio restoration capabilities that need to be heard to be believed, from seamlessly removing coughs and background noise to reducing wind roar and ambient noise. Live video shoots for weddings, on-location interviews, and documentaries can present countless post-production challenges, and RX Elements gives videographers the tools they need to overcome them.

Specifications

Storage media and file formats

Recording media: microSD card (64 MB - 2 GB), microSDHC card (4-32 GB), microSDXC card (64-512 GB)

Recording and playback formats:
WAV: mono/poly (BWF format), 44.1/48 kHz, 16-bit, 24-bit, 32-bit float
MP3: 44.1/48 kHz, 128/192 kbit/s (recording) 32-320 kbit/s (playback)

Analogue audio inputs and outputs
Microphone input: 3.5-mm mini TRS jack (with screw lock)
Maximum input level: -11 dBu
Gain range: 7.5-38 dB
Input impedance: +/-2 kO
Included microphone: TM-10L
Sensitivity: -42 dBV/Pa
Maximum sound pressure level: 115 dB SPL
Supply voltage: 2.3 V
Analogue output (Headphones jack): 3.5-mm mini stereo jack (dual mono audio output)
Maximum output power: 10 mW + 10 mW (THD =0.1 %, 32 O)

Audio performance
Frequency response (input to recorded data): 20 Hz - 20 kHz, +0/-1 dB
Distortion: 0.01 % (1 kHz, input level -21 dBV)
Dynamic range: +/-105 dB

Power supply and other specifications

Power supply
2 AAA batteries (alkaline, NiMH or lithium rechargeable, sold separately)
USB bus power from a computer

Power consumption (batteries): 0.3 W (maximum)
Current consumption (USB bus power): 0.1 A (maximum)
Dimensions (W × H × D): 53 mm × 51 mm × 21 mm (excluding protrusions)
Weight@ 65 g (with batteries), 43 g (without batteries)
Permissible operating temperature range: 0-40 -C

Battery operation time
Conditions: WAV recording at 48 kHz, 32-bit float, mic connected, headphones not connected, limiter off, mono file, continuous operation, in hours:minutes (JEITA CP-2905)
Alkaline battery (Evolta)
16:30: No Bluetooth connection
16:00: Bluetooth connection

NiMH battery (Eneloop)
11:30: No Bluetooth connection
10:30: Bluetooth connection

Lithium battery (Energizer Ultimate Lithium)

24:30: No Bluetooth connection
23:00: Bluetooth connection

Note: Operation times may vary depending on the recording media being used. Reduced battery life when using headphones.

Notes: Do you use pedals that don't match the outputs of your power supply? With EBS new power adapter cables, there's a way to solve most matters.

It sucks when you realize your coolest vintage pedal or latest digital processor-driven unit can't be fed from your pedalboard power supply because they are thirstier or uses different power inputs than your power supply features. At worst, you may even skip bringing your favourite toys to avoid the hassle. However, with the new EBS adapter cables, you can solve many of these issues easily and save the space that those extra power supplies may occupy.

Need to convert a 2.1 mm plug to 2.5 mm? No problem.
Need more current than you get from one output? No problem.
Need 18 or 24V DC power from 9 and 12V outputs? No problem.
You can even change the polarity from the common Center Negative to Center Positive using one of the new EBS adaptor cables.

Here's how you do it:
To go from 2.1 to 2.5 mm, use the DC1-48 90/0 2.5 adaptor.
Want to change the polarity? Use the DC1-48 90/0 RP adaptor.
To increase the current, use the DC1-48 90/0 PAR and connect two outputs from your power supply. The total current will be the current from both outputs added together.*
To increase the voltage, use the DC1-48 90/0 SER and connect two outputs from your power supply. The total voltage will be the voltage from both outputs added together.*

* IMPORTANT! Requires a power supply with isolated, floating outputs.