100% Sicheres Einkaufen

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Sicheres Einkaufen

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

MIDI Solutions

View:
Options
Artikel 1 bis 35 von 35 auf Seite 1 von 1 anzeigen
MIDI Solutions Beat Converter (MIDI beat converter)
Cat: 592379 Rel: 10 Nov 15
 
Can be programmed to send out a Note or Control Change message on the beat in response to MIDI Clock messages
Notes: The Beat Converter can be programmed to send out a Note or Control Change message on the beat in response to MIDI Clock messages. This enables devices that only allow their tap tempo function to be controlled by a Note or Control Change message to be synchronized to devices that send MIDI Clock.

The Beat Converter is programmed by sending it MIDI System Exclusive messages (see FAQs - Programming). For a complete description of the programming options, see the Beat Converter Operating Instructions (.pdf file). Once programmed, settings are retained even after power is removed. The Beat Converter can be reprogrammed with new settings as often as needed.

The Beat Converter is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information).
Read more
out of stock $90.21
MIDI Solutions Beat Indicator (MIDI beat indicator)
Cat: 592381 Rel: 10 Nov 15
 
Contains an ultra bright LED that can be programmed to flash on the beat in response to MIDI Clock messages
Notes: The Beat Indicator contains an ultra bright LED that can be programmed to flash on the beat in response to MIDI Clock messages. An invaluable tool for enabling drummers or live musicians to keep time with MIDI sequences during breaks or intros. The flash can be advanced or delayed by up to 128 ms from the actual beat, and the brightness of the flash is programmable. The Beat Indicator can also be programmed to flash in response to a Note or Control Change message.

The Beat Indicator is programmed by sending it MIDI System Exclusive messages (see FAQs - Programming). For a complete description of the programming options, see the Beat Indicator Operating Instructions (.pdf file). Once programmed, settings are retained even after power is removed. The Beat Indicator can be reprogrammed with new settings as often as needed.

The Beat Indicator is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). It is recommended that no more than one Beat Indicator be powered from a single MIDI Out or Thru, if other MIDI Solutions products are required in series with the Beat Indicator a MIDI Solutions Power Adapter is recommended.
Read more
out of stock $90.21
Cat: 524243 Rel: 14 Mar 14
 
Compact MIDI unit for generating MIDI data from Yamaha BC3A and older BC2 Breath Controller
Notes: * Note that Yamaha has discontinued the BC3A, however we will continue to produce this product in the near term for customers that have previously purchased the BC3A.

The MIDI Solutions Breath Controller is a breath to MIDI converter for use with the Yamaha BC3A Breath Controller (TM). The Breath Controller accepts the BC3A as input and generates continuous MIDI data corresponding to the amount of breath pressure applied to it. The Breath Controller will also accept older Yamaha BC2 units.

The Breath Controller can be programmed to send:

Aftertouch

Pitch Bend

Control Change

System Exclusive

The Breath Controller has a MIDI Echo parameter that is selectable on/off.

Another unique feature of the Breath Controller is its ability to add a variable amount of curvature to the response of the applied pressure of the BC3A. This allows you to correct for a nonlinear response, or to add greater response at one end of the breath range compared to the other.

The Breath Controller is programmed by sending it MIDI System Exclusive messages (see FAQs - Programming). Once programmed, its settings are retained even after power is removed. The Breath Controller can be reprogrammed with new settings as often as needed. The Breath Controller's factory default settings are for it to send CC #7 (volume) on MIDI channel 1, with the Echo parameter set to ON.

The Breath Controller is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.

weight: 4.1 oz.
dimensions: 4-3/16" x 2-3/16" x 1-3/32"
Read more
out of stock $136.69
MIDI Solutions Dual Footswitch Controller (MIDI footswitch controller)
Cat: 592369 Rel: 10 Nov 15
 
1/4" connection to an external dual footswitch or two contact closures which can be used to trigger MIDI events
Notes: The MIDI Solutions Dual Footswitch Controller provides a 1/4" stereo phone jack input for connection to an external dual footswitch or two contact closures which can be used to trigger MIDI events. Triggered MIDI events are merged with incoming MIDI messages and sent to the MIDI output of the Dual Footswitch Controller.

Triggered event types are programmable and include:
Note
Control Change
Pitch Bend
Program Change
Start/Stop
System Exclusive

Other functions include:
Program Change INC/DEC
Rechannelize
Transpose
Tap Tempo
Note-on Filter

MIDI Echo and Footswitch Toggle parameters are selectable on/off.

The Polarity of each footswitch can be determined automatically on power-up, or can be programmed to normally-open or normally-closed. It's also possible for the Dual Footswitch Controller to send out the state of its footswitches immediately on power-up rather than waiting for each to be depressed.

The Dual Footswitch Controller is programmed by sending it MIDI System Exclusive messages (see FAQs - Programming). This is easily done with the MIDI Solutions Programming Tools software. Once programmed, its settings are retained even after power is removed. The Dual Footswitch Controller can be reprogrammed with new settings as often as needed.

The Dual Footswitch Controller is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.
Read more
out of stock $160.98
Cat: 524240 Rel: 14 Mar 14
 
Compact MIDI unit for processing MIDI events with a wide variety of functions
Notes: If you need to map, filter, and process MIDI events in specific ways, the MIDI Solutions Event Processor may be exactly the solution you are looking for. The Event Processor offers 10 settings, each of which can be programmed with a unique MIDI processing function (for 32 settings see the Event Processor Plus). By combining these settings the Event Processor becomes an extremely powerful tool capable of processing MIDI events in almost any way imaginable. You can map MIDI events or ranges of MIDI events to other MIDI events, filter MIDI events or ranges of MIDI events, trigger MIDI events, toggle between MIDI events, sequence through MIDI events, scale or crossfade MIDI messages, transpose notes, scale velocities, map to and from System Exclusive, NRPN, Bank Select messages, store incoming values in variables for later use... the Event Processor is like a swiss army knife of MIDI processing products, an indispensable tool in any MIDI musician's arsenal.

The Event Processor works by comparing each incoming MIDI event with each of its 10 settings. When an incoming MIDI event matches a setting, the event is processed according to that setting. By combining different settings for different incoming events, the Event Processor becomes an extremely powerful tool capable of achieving a wide range of MIDI-processing functions.

Following is a list of the Event Processor's functions, but better yet download the Event Processor Programming Tools software and read the Guide to the Event Processor and Event Processor Plus by Bruce Wahler of Ashby Solutions. The Programming Tools software is free for download, quick to install, and contains lots of example files that demonstrate the many applications of the Event Processor. And the Guide to the Event Processor and Event Processor Plus is a comprehensive guide that makes it easy to understand everything these amazing products are capable of!

Filter MIDI Events

Map MIDI Events

Trigger MIDI Events

Cycle Through a Sequence of MIDI Events

Turn Settings On and Off

Store Incoming Values in Variables

The Event Processor is programmed by sending it MIDI System Exclusive messages (see FAQs - Programming). This is easily done with the Event Processor Programming Tools software. Once programmed, the Event Processor's settings are retained even after power is removed. The Event Processor can be reprogrammed with new settings as often as needed.

The Event Processor is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.

weight: 3.8 oz.
dimensions: 4-3/16" x 2-3/16" x 1-3/32"
Read more
out of stock $101.50
Cat: 524241 Rel: 13 Mar 14
 
Compact MIDI event processor with a wide variety of functions
Notes: The MIDI Solutions Event Processor Plus offers all of the functionality of the MIDI Solutions Event Processor, with 32 settings instead of the Event Processor's 10, and 8 variable storage locations instead of the Event Processor's 2. Each of the Event Processor Plus's 32 settings can be programmed with a unique MIDI processing function. By combining these settings the Event Processor Plus becomes an extremely powerful tool capable of processing MIDI events in almost any way imaginable. You can map MIDI events or ranges of MIDI events to other MIDI events, filter MIDI events or ranges of MIDI events, trigger MIDI events, toggle between MIDI events, sequence through MIDI events, scale or crossfade MIDI messages, transpose notes, scale velocities, map to and from System Exclusive, NRPN, Bank Select messages, store incoming values in variables for later use... the Event Processor is like a swiss army knife of MIDI processing products, an indispensable tool in any MIDI musician's arsenal.

The Event Processor Plus works by comparing each incoming MIDI event with each of its 32 settings. When an incoming MIDI event matches a setting, the event is processed according to that setting. By combining different settings for different incoming events, the Event Processor Plus becomes an extremely powerful tool capable of achieving virtually any combination of MIDI-processing functions.

Following is a list of the Event Processor Plus's functions, but better yet download the Event Processor Plus Programming Tools software and read the Guide to the Event Processor and Event Processor Plus by Bruce Wahler of Ashby Solutions. The Programming Tools software is free for download, quick to install, and contains lots of example files that demonstrate the many applications of the Event Processor Plus. And the Guide to the Event Processor and Event Processor Plus is a comprehensive guide that makes it easy to understand everything these amazing products are capable of!

Filter MIDI Events

Map MIDI Events

Trigger MIDI Events

Cycle Through a Sequence of MIDI Events

Turn Settings On and Off

Store Incoming Values in Variables


The Event Processor Plus is programmed by sending it MIDI System Exclusive messages (see FAQs - Programming). This is easily done with the Event Processor Plus Programming Tools software. Once programmed, the Event Processor Plus's settings are retained even after power is removed. The Event Processor Plus can be reprogrammed with new settings as often as needed.

The Event Processor Plus is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.

weight: 3.8 oz.
dimensions: 4-3/16" x 2-3/16" x 1-3/32"
Read more
 2 in stock $141.74
Cat: 524248 Rel: 14 Mar 14
 
1U rackmounted footswitch controller providing 8 x 1/4" jack inputs use to trigger MIDI events
Notes: The MIDI Solutions F8 8 input MIDI Footswitch Controller provides eight 1/4" phone jack inputs for connection to footswitches or contact closures which can be used to trigger MIDI events. Triggered MIDI events are merged with incoming MIDI messages and sent to the MIDI output of the F8.

Triggered event types are programmable and include:

Note

Control Change

Pitch Bend

Program Change

Start/Stop

System Exclusive

Other functions include:

Program Change INC/DEC

Rechannelize

Transpose

Tap Tempo

Note-on Filter


MIDI Echo and Footswitch Toggle parameters are selectable on/off.

The Polarity of each footswitch can be determined automatically on power-up, or can be programmed to normally-open or normally-closed. It's also possible for the F8 to send out the state of its footswitches immediately on power-up rather than waiting for each to be depressed.

The F8 is programmed by sending it MIDI System Exclusive messages (see FAQs - Programming). This can be done easily with the Programming Tools software for the F8 and R8. One of our customers has also developed a Programming Tools application for Mac OS X, we do not provide support for this application but it is available here: www.crfmw.be/MS

Once programmed, the F8's settings are retained even after power is removed. The F8 can be reprogrammed with new settings as often as needed.

The F8 is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.

weight: 4.2 lbs.
dimensions: 19" x 6.5" x 1.75"
Read more
out of stock $201.49
MIDI Solutions Footswitch Controller (footswitch controller)
Cat: 524238 Rel: 13 Mar 14
 
Compact footswitch controller for converting 1/4" jack signal into MIDI events
Notes: The MIDI Solutions Footswitch Controller provides a 1/4" phone jack input for connection to a footswitch or contact closure which can be used to trigger MIDI events (for eight footswitch inputs in a single rack space unit, see the MIDI Solutions F8). Triggered MIDI events are merged with incoming MIDI messages and sent to the MIDI output of the Footswitch Controller.

Triggered event types are programmable and include: Note, Control Change, Pitch Bend, Program Change, Start/Stop, System Exclusive

Other functions include: Program Change INC/DEC, Rechannelize, Transpose, Tap Tempo, Note-on Filter

MIDI Echo and Footswitch Toggle parameters are selectable on/off.

The Polarity of the footswitch can be determined automatically on power-up, or programmed to normally-open or normally-closed.

The Footswitch Controller is programmed by sending it MIDI System Exclusive messages (see FAQs - Programming). This can be done easily with the Processors Programming Tools software. Once programmed, its settings are retained even after power is removed. The Footswitch Controller can be reprogrammed with new settings as often as needed.

The Footswitch Controller is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.
Read more
 4 in stock $122.50
Click for better price!
quote 524238
Cat: 575470 Rel: 13 Mar 14
 
B-STOCK: Box opened, product in perfect working order
Notes: *** B STOCK - Box opened, product in perfect working order ***

The MIDI Solutions Footswitch Controller provides a 1/4" phone jack input for connection to a footswitch or contact closure which can be used to trigger MIDI events (for eight footswitch inputs in a single rack space unit, see the MIDI Solutions F8). Triggered MIDI events are merged with incoming MIDI messages and sent to the MIDI output of the Footswitch Controller.

Triggered event types are programmable and include: Note, Control Change, Pitch Bend, Program Change, Start/Stop, System Exclusive

Other functions include: Program Change INC/DEC, Rechannelize, Transpose, Tap Tempo, Note-on Filter

MIDI Echo and Footswitch Toggle parameters are selectable on/off.

The Polarity of the footswitch can be determined automatically on power-up, or programmed to normally-open or normally-closed.

The Footswitch Controller is programmed by sending it MIDI System Exclusive messages (see FAQs - Programming). This can be done easily with the Processors Programming Tools software. Once programmed, its settings are retained even after power is removed. The Footswitch Controller can be reprogrammed with new settings as often as needed.

The Footswitch Controller is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.
Read more
out of stock $116.43
Cat: 524246 Rel: 14 Mar 14
 
1U rackmounted 8 input MIDI merger unit
Notes: The MIDI Solutions M8 8 input MIDI Merger is an 8 in 1 out MIDI Merger. All MIDI messages appearing at any of the eight inputs are merged to the output (including System Exclusive, MIDI Clock, and MIDI Time Code messages). A fast merging algorithm ensures that all MIDI data is processed accurately with the minimal possible delay.

The M8 is MIDI powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.

weight: 4.3 lbs.
dimensions: 19" x 6.5" x 1.75"
Read more
out of stock $188.33
Cat: 606539 Rel: 13 Mar 14
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


The MIDI Solutions Merger is a 2-in 1-out MIDI Merger. All MIDI messages appearing at the two inputs are merged to the output (including System Exclusive, MIDI Clock, and MIDI Time Code messages). A fast merging algorithm ensures that all MIDI data is processed accurately with the minimal possible delay.

The Merger is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.
Read more
out of stock $66.83
Cat: 689200 Rel: 13 Mar 14
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


The MIDI Solutions Merger is a 2-in 2-out MIDI Merger. All MIDI messages appearing at the two inputs are merged to the outputs (including System Exclusive, MIDI Clock, and MIDI Time Code messages). A fast merging algorithm ensures that all MIDI data is processed accurately with the minimal possible delay.

The Merger is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.
Read more
out of stock $62.62
Cat: 524233 Rel: 13 Mar 14
 
Compact 2 in 2 out MIDI merger
Notes: The MIDI Solutions Merger is a 2-in 2-out MIDI Merger. All MIDI messages appearing at the two inputs are merged to the outputs (including System Exclusive, MIDI Clock, and MIDI Time Code messages). A fast merging algorithm ensures that all MIDI data is processed accurately with the minimal possible delay.

The Merger is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.
Read more
 2 in stock $68.84
Click for better price!
quote 524233
Cat: 592374 Rel: 10 Nov 15
 
High accuracy programmable MIDI delay
Notes: The MIDI Delay is a high accuracy programmable MIDI delay. All MIDI data received by the device is delayed by the programmed delay time. Delay times are programmable from 0 - 1023 ms, in 1 ms increments.

The MIDI Delay is programmed by sending it MIDI System Exclusive messages (see FAQs - Programming). For a complete description of the these messages, see the MIDI Delay Operating Instructions (.pdf file). Once programmed, the MIDI Delay's settings are retained even after power is removed. The MIDI Delay can be reprogrammed with new settings as often as needed.

The MIDI Delay is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.
Read more
out of stock $188.31
Cat: 524242 Rel: 13 Mar 14
 
Compact MIDI unit for generating MIDI data using an external expression pedal
Notes: The Pedal Controller accepts an expression pedal (such as the Yamaha FC7 or Roland EV-5 or any potentiometer connected to a 1/4" stereo phone plug) as an input and generates continuous MIDI data based on its position. The Pedal Controller may be inserted inline at any point in the MIDI data stream, allowing you to send continuous controller information to any device in your MIDI setup.

The Pedal Controller's factory default settings are for it to send CC#7 (volume) on MIDI channel 1, so if this is what you need the Pedal Controller to do then no programming is necessary - just insert the Pedal Controller in your setup and it's ready to use. The Pedal Controller can also be programmed to send other types of MIDI messages, for more info read on...

The Pedal Controller can be programmed to send:

Aftertouch

Pitch Bend

Control Change

System Exclusive

The Pedal Controller has a MIDI Echo parameter that is selectable on/off.

The Pedal Controller accurately tracks the position of the pedal or potentiometer connected to it. Small fluctuations are eliminated when the pedal is in a stationary position and no extraneous messages are sent out. When the pedal is moved slightly, the Pedal Controller will send an update even if its position has only changed by a single value. Many control wheels or knobs only update themselves every two or every four values, resulting in coarser control, and sometimes zipper noise.

Another unique feature of the Pedal Controller is its ability to add a variable amount of curvature to the response of the pedal. This allows you to correct for pedals with nonlinear responses, or to add greater response at one end of the pedal compared to the other.

The Pedal Controller is programmed by sending it MIDI System Exclusive messages (see FAQs - Programming). Once programmed, its settings are retained even after power is removed. The Pedal Controller can be reprogrammed with new settings as often as needed. The Pedal Controller's factory default settings are for it to send CC #7 (volume) on MIDI channel 1, with the Echo parameter set to ON.

The Pedal Controller is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.

weight: 4.1 oz.
dimensions: 4-3/16" x 2-3/16" x 1-3/32"
Read more
out of stock $122.50
Cat: 633582 Rel: 13 Mar 14
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


The Pedal Controller accepts an expression pedal (such as the Yamaha FC7 or Roland EV-5 or any potentiometer connected to a 1/4" stereo phone plug) as an input and generates continuous MIDI data based on its position. The Pedal Controller may be inserted inline at any point in the MIDI data stream, allowing you to send continuous controller information to any device in your MIDI setup.

The Pedal Controller's factory default settings are for it to send CC#7 (volume) on MIDI channel 1, so if this is what you need the Pedal Controller to do then no programming is necessary - just insert the Pedal Controller in your setup and it's ready to use. The Pedal Controller can also be programmed to send other types of MIDI messages, for more info read on...

The Pedal Controller can be programmed to send:

Aftertouch

Pitch Bend

Control Change

System Exclusive

The Pedal Controller has a MIDI Echo parameter that is selectable on/off.

The Pedal Controller accurately tracks the position of the pedal or potentiometer connected to it. Small fluctuations are eliminated when the pedal is in a stationary position and no extraneous messages are sent out. When the pedal is moved slightly, the Pedal Controller will send an update even if its position has only changed by a single value. Many control wheels or knobs only update themselves every two or every four values, resulting in coarser control, and sometimes zipper noise.

Another unique feature of the Pedal Controller is its ability to add a variable amount of curvature to the response of the pedal. This allows you to correct for pedals with nonlinear responses, or to add greater response at one end of the pedal compared to the other.

The Pedal Controller is programmed by sending it MIDI System Exclusive messages (see FAQs - Programming). Once programmed, its settings are retained even after power is removed. The Pedal Controller can be reprogrammed with new settings as often as needed. The Pedal Controller's factory default settings are for it to send CC #7 (volume) on MIDI channel 1, with the Echo parameter set to ON.

The Pedal Controller is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.

weight: 4.1 oz.
dimensions: 4-3/16" x 2-3/16" x 1-3/32"
Read more
out of stock $120.94
MIDI Solutions Power Adapter (MIDI power adapter)
Cat: 592382 Rel: 10 Nov 15
 
Power Adapter for MIDI Solutions products
Notes: This power adapter provides power to MIDI Solutions products in instances when it is not available or where a large number of items are being chained in series. It has an optically isolated MIDI In, MIDI Thru, and power connection for a 9V (AC or DC) wall adapter. It's possible to power up to 20 MIDI Solutions products from the power adapter's single Thru output. It can also be used in a transmitter/receiver configuration to send MIDI over long distances.
Read more
 2 in stock $44.54
Click for better price!
quote 592382
Cat: 743108 Rel: 10 Nov 15
 
B-STOCK: Packaging opened, product unused & in perfect condition
Notes: ***B-STOCK: Packaging opened, product unused & in perfect condition***


This power adapter provides power to MIDI Solutions products in instances when it is not available or where a large number of items are being chained in series. It has an optically isolated MIDI In, MIDI Thru, and power connection for a 9V (AC or DC) wall adapter. It's possible to power up to 20 MIDI Solutions products from the power adapter's single Thru output. It can also be used in a transmitter/receiver configuration to send MIDI over long distances.
Read more
 1 in stock $41.51
Cat: 592372 Rel: 10 Nov 15
 
Allows MIDI messages to be routed from either of its two MIDI inputs to its MIDI output
Notes: The Programmable Input Selector allows MIDI messages to be routed from either of its two MIDI inputs (InA or InB) to its MIDI output. All MIDI messages, or all MIDI messages except Note messages, can be routed from either of the MIDI inputs. Inputs are switched by a footswitch or contact closure connected to the 1/4" phone jack Fsw input, or by receipt of MIDI Program Change messages appearing at InA. The LED can be programmed to flash in different ways to indicate which state the device is in.

The factory default settings for the Programmable Input Selector are for it to toggle between sending all MIDI messages from InA and all MIDI messages from InB. The Programmable Input Selector is programmed by sending it MIDI System Exclusive messages (see FAQs - Programming). For a complete description of the programming options, see the Programmable Input Selector Operating Instructions (.pdf file). Once programmed, settings are retained even after power is removed. The Programmable Input Selector can be reprogrammed with new settings as often as needed.

The Programmable Input Selector is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information).
Read more
out of stock $117.96
Cat: 592373 Rel: 10 Nov 15
 
Allows MIDI messages to be routed to either of two MIDI outputs
Notes: The Programmable Output Selector allows MIDI messages to be routed to either of two MIDI outputs (OutA or OutB). All MIDI messages, or all MIDI messages except Note messages, can be routed to either of the MIDI outputs. Outputs are switched by a footswitch or contact closure connected to the 1/4" phone jack Fsw input, or by receipt of MIDI Program Change messages. The LED can be programmed to flash in different ways to indicate which state the device is in.

The factory default settings for the Programmable Output Selector are for it to toggle between sending all MIDI messages to OutA and all MIDI messages to OutB. The Programmable Output Selector is programmed by sending it MIDI System Exclusive messages (see FAQs - Programming). For a complete description of the programming options, see the Programmable Output Selector Operating Instructions (.pdf file). Once programmed, settings are retained even after power is removed. The Programmable Output Selector can be reprogrammed with new settings as often as needed.

The Programmable Output Selector is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information).
Read more
out of stock $116.43
Cat: 524234 Rel: 13 Mar 14
 
Compact 4 in 1 out MIDI merger
Notes: The MIDI Solutions Quadra Merge packs four MIDI inputs into a 4.5" x 2.5" x 1.25" package. All MIDI messages appearing at the four inputs of the Quadra Merge are merged to the output (including System Exclusive, MIDI Clock, and MIDI Time Code messages). A fast merging algorithm ensures that all MIDI data is processed accurately with the minimal possible delay.

The Quadra Merge is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.
Read more
 2 in stock $102.77
Click for better price!
quote 524234
Cat: 613068 Rel: 13 Mar 14
 
B-STOCK: Outer box missing, product in perfect working order
Notes: ***B-STOCK: Outer box missing, product in perfect working order***


The MIDI Solutions Quadra Thru is a 1 in 4 out MIDI Thru Box. All MIDI messages appearing at the input are sent to all four Thru outputs. Active circuitry cleans up any skewing of MIDI data bits that has occurred at the input, ensuring reliable operation in setups that require daisy chaining or long cable runs.

The Quadra Thru is MIDI powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.
Read more
out of stock $50.12
Cat: 683569 Rel: 13 Mar 14
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


The MIDI Solutions Quadra Thru is a 1 in 4 out MIDI Thru Box. All MIDI messages appearing at the input are sent to all four Thru outputs. Active circuitry cleans up any skewing of MIDI data bits that has occurred at the input, ensuring reliable operation in setups that require daisy chaining or long cable runs.

The Quadra Thru is MIDI powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.
Read more
out of stock $44.70
Cat: 524237 Rel: 13 Mar 14
 
Compact 1 in 4 out MIDI thru box
Notes: The MIDI Solutions Quadra Thru is a 1 in 4 out MIDI Thru Box. All MIDI messages appearing at the input are sent to all four Thru outputs. Active circuitry cleans up any skewing of MIDI data bits that has occurred at the input, ensuring reliable operation in setups that require daisy chaining or long cable runs.

The Quadra Thru is MIDI powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.
Read more
 More than 10 in stock $52.64
Click for better price!
quote 524237
Cat: 524249 Rel: 14 Mar 14
 
1U rackmounted 8 output MIDI controlled relay array unit
Notes: The MIDI Solutions R8 8 output MIDI controlled Relay Array contains eight relays which can be programmed to open or close in response to MIDI events.

Event types are programmable and include:

Note

Control Change

Program Change

System Exclusive

Fast reed relays are used for a response time of less than 2ms. Relay contacts are rated at 500mA. Contacts are made available via connections at the tip and sleeve of 1/4" mono phone jacks. When switching inductive loads be aware of precautions that must be taken to avoid back EMF problems.

The R8 is programmed by sending it MIDI System Exclusive messages (see FAQs - Programming). This can be done easily with the Programming Tools software for the F8 and R8. Once programmed, the R8's settings are retained even after power is removed. The R8 can be reprogrammed with new settings as often as needed.

The R8 is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.

weight: 4.4 lbs.
dimensions: 19" x 6.5" x 1.75"
Read more
out of stock $302.74
MIDI Solutions Relay (MIDI relay)
Cat: 524239 Rel: 13 Mar 14
 
Programmable relay can be set to open or close in response to MIDI events
Notes: The MIDI Solutions Relay contains a relay that can be programmed to open or close in response to MIDI events (for eight relays in a single rack space unit, see the MIDI Solutions R8).

Event types are programmable and include: Note, Control Change, Program Change, System Exclusive

A fast reed relay is used for a response time of less than 2ms. Relay contact is rated at 500 mA. Contacts are made available via connection at the tip and sleeve of a 1/4" mono phone jack. When switching inductive loads be aware of precautions that must be taken to avoid back EMF problems.

The Relay is programmed by sending it MIDI System Exclusive messages (see FAQs - Programming). This can be done easily with the Processors Programming Tools software. Once programmed, its settings are retained even after power is removed. The Relay can be reprogrammed with new settings as often as needed.

The Relay is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.
Read more
out of stock $101.24
MIDI Solutions Router (MIDI router)
Cat: 524244 Rel: 13 Mar 14
 
1 in / 2 out MIDI data router and filter unit
Notes: The MIDI Solutions Router is a 1 in 2 out MIDI data router/filter. Selected MIDI messages can be routed to either, both, or neither of the Router's two MIDI outputs.

The Router can route/filter selected ranges of most MIDI data types (see examples). Messages can also be rechannelized to any other MIDI channel. (for on-the-fly rechannelizing, see the MIDI Solutions Footswitch Controller).

The Router will accept a total of 10 settings. Settings are stored in a priority format - if two settings conflict the higher priority setting takes precedence.

The Router is programmed by sending it MIDI System Exclusive messages (see FAQs - Programming). This can be done easily with the Processors Programming Tools software. Once programmed, its settings are retained even after power is removed. The Router can be reprogrammed with new settings as often as needed.

The Router is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.

weight: 4.0 oz.
dimensions: 4-3/16" x 2-3/16" x 1-3/32"
Read more
out of stock $150.85
Cat: 524247 Rel: 13 Mar 14
 
Compact 1 in / 8 out MIDI Thru uni
Notes: he MIDI Solutions T8 8-output MIDI Thru Box is a 1-in 8-out MIDI Thru Box. All MIDI messages appearing at the input are sent to all eight Thru outputs. Active circuitry cleans up any skewing of MIDI data bits that has occurred at the input, ensuring reliable operation in setups that require daisy chaining or long cable runs.

The T8 is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.

weight: 4.2 lbs.
dimensions: 19" x 6.5" x 1.75

Read more
out of stock $131.61
Cat: 649812 Rel: 13 Mar 14
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


he MIDI Solutions T8 8-output MIDI Thru Box is a 1-in 8-out MIDI Thru Box. All MIDI messages appearing at the input are sent to all eight Thru outputs. Active circuitry cleans up any skewing of MIDI data bits that has occurred at the input, ensuring reliable operation in setups that require daisy chaining or long cable runs.

The T8 is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.

weight: 4.2 lbs.
dimensions: 19" x 6.5" x 1.75

Read more
out of stock $121.50
Cat: 593572 Rel: 13 Mar 14
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


The MIDI Solutions Thru is a 1 in 2 out MIDI Thru Box. All MIDI messages appearing at the input are sent to both Thru outputs. Active circuitry cleans up any skewing of MIDI data bits that has occurred at the input, ensuring reliable operation in setups that require daisy chaining or long cable runs.

The MIDI Solutions Thru is MIDI powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.
Read more
out of stock $36.45
Cat: 650744 Rel: 13 Mar 14
 
B-STOCK: Box damaged, product unused & in perfect condition
Notes: ***B-STOCK: Box damaged, product unused & in perfect condition***


The MIDI Solutions Thru is a 1 in 2 out MIDI Thru Box. All MIDI messages appearing at the input are sent to both Thru outputs. Active circuitry cleans up any skewing of MIDI data bits that has occurred at the input, ensuring reliable operation in setups that require daisy chaining or long cable runs.

The MIDI Solutions Thru is MIDI powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.
Read more
out of stock $39.49
MIDI Solutions Thru Box V2 (MIDI interface)
Cat: 524235 Rel: 13 Mar 14
 
Compact 1 in 2 out MIDI thru box
Notes: The MIDI Solutions Thru is a 1 in 2 out MIDI Thru Box. All MIDI messages appearing at the input are sent to both Thru outputs. Active circuitry cleans up any skewing of MIDI data bits that has occurred at the input, ensuring reliable operation in setups that require daisy chaining or long cable runs.

The MIDI Solutions Thru is MIDI powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.
Read more
 3 in stock $44.54
Click for better price!
quote 524235
Cat: 735499 Rel: 13 Mar 14
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


The MIDI Solutions Thru is a 1 in 2 out MIDI Thru Box. All MIDI messages appearing at the input are sent to both Thru outputs. Active circuitry cleans up any skewing of MIDI data bits that has occurred at the input, ensuring reliable operation in setups that require daisy chaining or long cable runs.

The MIDI Solutions Thru is MIDI powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.
Read more
out of stock $38.92
Cat: 725742 Rel: 13 Mar 14
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


The MIDI Solutions Thru is a 1 in 2 out MIDI Thru Box. All MIDI messages appearing at the input are sent to both Thru outputs. Active circuitry cleans up any skewing of MIDI data bits that has occurred at the input, ensuring reliable operation in setups that require daisy chaining or long cable runs.

The MIDI Solutions Thru is MIDI powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.
Read more
out of stock $38.59
Cat: 524245 Rel: 13 Mar 14
 
Compact unit for applying selected velovity curves to incoming MIDI signals
Notes: The MIDI Solutions Velocity Converter applies selected velocity curves to incoming MIDI notes. Curves can be selected from 40 preset curves or a user defined curve. Even though the 40 presets offer a wide range of curves that are enough to cover most needs, the user curve makes the Velocity Converter a completely versatile device by allowing one curve to be created to an exact specification.

The Velocity Converter can apply a separate curve to each MIDI channel, allowing the velocity response of a sending keyboard to be matched to individual sound modules that are each set to receive on a different MIDI channel.

Another feature of the Velocity Converter is the option to assign velocities based on a selected incoming Control Change value. In this mode, the Velocity Converter monitors the value of a selected Control Change message on a selected MIDI channel, and applies this value to all incoming velocities on that MIDI channel. It is also possible to add an offset to this value to keep the outgoing velocities above a specified level.

The Velocity Converter is programmed by sending it MIDI System Exclusive messages (see FAQs - Programming). This can be done easily with the Processors Programming Tools software. Once programmed, its settings are retained even after power is removed. The Velocity Converter can be reprogrammed with new settings as often as needed.

The Velocity Converter is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.

weight: 3.8 oz.
dimensions: 4-3/16" x 2-3/16" x 1-3/32"
Read more
out of stock $101.24
Artikel 1 bis 35 von 35 auf Seite 1 von 1 anzeigen

Filter

MIDI Solutions
Close