100% Sicheres Einkaufen

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Sicheres Einkaufen

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Koma Elektronik

View:
Options
Artikel 1 bis 7 von 7 auf Seite 1 von 1 anzeigen
Cat: 705386 Rel: 23 Oct 18
 
High-quality amplifier for audio signals - 12HP
Notes: The KOMA Dual Discrete VCA offers two independent high quality VCA channels, both built up out of discrete transistor cells with low CV and audio bleed, very low noise and distortion. The VCA's feature set also enables you to experiment with the linear/exponential response curve, changing the dynamics of your sound. Play around with the gain settings for creative distortion effects in the classic KOMA style:

High quality sound by default, noise by choice!
Read more
out of stock $165.42
Cat: 708823 Rel: 23 Oct 18
 
10 pin to 16 pin Eurorack power cable
Notes: 10 pin to 16 pin Eurorack power cable, for connecting modules to a Eurorack busboard - 25cm long.
Read more
out of stock $1.56
Cat: 725948 Rel: 25 Mar 19
 
Ribbon controller for the Field Kit
Notes: This is an awesome addition to the Field Kit. Slide your finger over the Softpot and the voltage will increase and decrease. The Softpot has a hold function, so you can play it like a keyboard, outputting voltages that are very useful to control motors and casually search through the radio bands, or to control a hacked walkman!

The product consists of:

- Field Kit Linear Softpot Sensor
- 1 x Dupont 3 contact cable to connect the Sensors to the Field Kit
Read more
out of stock $27.31
Cat: 725945 Rel: 25 Mar 19
 
Sensor Pack A - features five useful components for owners of the Field Kit
Notes: The Field Kit Sensor Pack A consists of 5 sensors:

- Button/Jack
- Electret Microphone
- Light Sensor
- Temperature Sensor
- Ball Switch
- 2 x Dupont 3 contact cable to connect the Sensors to the Field Kit

Button/Jack:

This is rather a utility tool than an actual sensor. It allows you to either use a pushbutton or any CV-Signal (0- 5V) as a signal source. You can select to either use the button or any signal connected to the jack input with the jumper located right next to pin-header. The voltage present at the output upon a button press can be selected with the two jumpers next to the button. The button and jack can be used with both the ANALOG IN and the DIGITAL IN of the Field Kit's Sensor Interface.

Electret Microphone:

The electret microphone provides a simple solution to use your surroundings as a sample source. The board features a little trimmer to adjust the gain of the microphone pre-amplifier. Use a little screwdriver to adjust the gain according to the printing on the sensor board. It's preferable to adjust the signal level with the trimmer first and only use the level pot of the analog signal interface as a second adjustment stage. The electret microphone has an omnidirectional directivity and is capable of capturing the whole frequency spectrum from 20 to 20000 Hz. The electret microphone is best be used with the ANALOG IN of the Field Kit's Sensor Interface.

Light Sensor:

The light sensor will change the output voltage depending on the light intensity. The spectral sensitivity is similar to the human eye, covering the full spectra of visible light, with a peak at 570nm (green/yellow). The change of the voltage according to the light intensity can be set with the three jumpers on the board. Set those jumpers according to printing on the board. The light sensor can be used with the ANALOG IN and the DIGITAL IN of the Field Kit's Sensor Interface.

Temperature Sensor:

The temperature board features two output modes: a continuous CV or a trigger.

CV Mode: The board will output a continuous voltage in range 0 - 5 V depending on the measured temperature and scaled to the set lower and upper temperature limit.

Trigger Mode: The board will generate a trigger whenever the measured temperature rises above the set upper limit temperature. LED 1 will blink whenever a trigger is generated. The sensor covers a temperature range from -55-C to +125-C.

Ball Switch:

The ball switch consists of a little bouncy ball jumping around in a container connecting two contacts and thus acts like a switch. In contrary to a normal push button, which has very well defined states, the switching of a ball switch is more similar to a percussion shaker. There are two resting-positions which define a certain state of the switch: the board is lying flat on the table with its bottom facing the table: the switch is open the board is lying flat on the table with its top facing the table: the switch is closed. The voltage assigned to those states can be set with the two jumpers on the board. Refer to the printing on the board to identify the position that suits your needs. The ball switch can be used with the ANALOG IN and the DIGITAL IN of the Field Kit's Sensor Interface.
Read more
out of stock $52.01
Cat: 725946 Rel: 25 Mar 19
 
Sensor Pack B - features three useful components for owners of the Field Kit
Notes: The Field Kit Sensor Pack B consists of 3 sensors:

- Accelerometer
- Capacitive Touch
- Sequential Voltage Source
- 2 x Dupont 3 contact cable to connect the Sensors to the Field Kit

Accelerometer:

This board measures acceleration along three axis. Those measurements are used to generate CV signals or triggers. The accelerometer board features three modes:

- Tap Detector with continuous CV output
- Tap Detector with trigger output
- The 'motorcycle mode'

Capacitive Touch:

Connect the Capacitive Touch to organic items and use them as a controller, the Field Kit Sensor Interface will send out signals once you touch the matter. Banana rock, Cucumber Swing, Avocado Samba!

Sequential Voltage Source:

The Sequential Voltage Source is a little magical module which you can use in your musical setup quite easily and allows your Field Kit to become a Sequencer too. This board has three different modes: Stepped Random Voltage, CV Sequencer and a Euclidean Trigger Sequencer.
Read more
out of stock $47.85
Cat: 705385 Rel: 23 Oct 18
 
Pack of cables for use with the Koma Elektronik Strom Mobile power solution
Notes: Strom Mobile Cable Pack includes:

- 1 x USB B cable (specifically designed version, to minimize voltage drop)
- 1 x 1-to-5 daisychain DC cable
- 2 x DC cable
- 1 x polarity changing DC cable (for instance to go from centre negative to positive and visa versa)
Read more
 2 in stock $31.20
Cat: 705380 Rel: 23 Oct 18
 
Reliable voltage source for powering equipment on the move
Notes: Strom Mobile is a portable power solution for music makers and everyone who needs reliable voltage source at all times! The Strom Mobile transforms the output voltage of USB power banks (5V DC) to either 9V or 12V DC to power any (music) device running on those voltages. There are two independent channels which can output individually set voltages. The Strom Mobile includes an input current feedback system to save the user from exceeding the maximum output current of the USB powerbank in use.

1 unit consists of the Strom Mobile, 1 x USB B Cable and 2 x DC Cable and an English user manual. Please note: USB Powerbanks not included.
Read more
 2 in stock $137.32
Artikel 1 bis 7 von 7 auf Seite 1 von 1 anzeigen

Filter

Koma Elektronik
Release Date
Featured
Close