100% Sicheres Einkaufen

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Sicheres Einkaufen

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

KMA Audio Machines

Startseite  Labels  

KMA Audio Machines

Options
Artikel 1 bis 12 von 12 auf Seite 1 von 1 anzeigen
KMA Audio Machines Astrospurt Dreamy 4 Stage JFet Phaser Pedal
Cat: 782201 Rel: 24 Aug 20
 
Phaser pedal
Notes: Time and Space are lost within the sound of the universe. Breath in and breath out, slow down and be ready for the Astrospurt. Fasten your seatbelt and get lost in the wide, warm and soft soundscapes generated by this pedal! The Astrospurt is KMA's take on the classic four-stage JFET based phaser. Taking this classic analog circuit, KMA Audio Machines have squeezed out as much as possible to give you a versatile and great sounding, but very easy to use phaser.

In place of the fixed volume when engaiging the pedal, a control to dial in the right amount of signal was put in place, either to boost it or cut it. To give you a possibility for a more subtle phasing sound, the Astrospurt has a DEPTH control where you can choose between a pronounced phased tone or a more slightly modulated signal. The Astrospurt is not just a regular phaser though, it covers all the spacey, dizzy and wobble sounds and has these all on tap. The MIX control defines the ratio of clean and phase shifted signal - turn it fully clockwise to get just a clean tone, but start turning it the other way and the sound gets much more crazier. Turn it fully counter-clockwise to get the pulsing vibe of the stars surrounding you. But there is something you cannot miss to hear before flipping the switch on the left - listen to the secrets of the black hole. Some crackling noise here, or a tock tock there. Turn up the EMPH control to push everything over the edge. Adding a distortion or a fuzz in front of the Astrospurt will bring you synthetic and metallic sounds - once tried, you will never head back! So turn up the SPURT control, see how fast the engines will flicker and at the end of your journey, turn it down and rest in that wide and swooshy tone.

Powered by an optional standard 9V-18V DC PSU (negative center, 2.1mm, approx. 5mA current draw)

Every pedal is designed, assembled, silkscreened, tested and numbered by hand in our small workshop. We use doublesided PCBs which are designed, tested and assembled by ourselfs, to guarantee a high quality standard and keep the price of our pedals reasonable. The use of an indestructible powdercoated die-cast enclosure ensures a maximum durability.

Emph

The emphase control transforms your Astrospurt into an all-noise from universe receiving station. Flip the switch below to activate it. Listen to a slight dok dok to a strong click click, over to that scary oscillating sounds from that hole in front of you.

Signal

Dial in the right level of the effect. You want to stay behind the band? Turn it down and roll off the carpet. To cut trough by a solo, turn it up to get a little boost.

Mix

Define your own mix of phase shifted and clean signal. Turn it clockwise for a clean signal. Go back to 12 o'clock for the classic deep and warm phase tone. Fully counter clockwise you can dive into dizzy vibrato sounds.

Depth

To get a deep phasing, raise the depth control. If you wanna a more subtile sound, dial it pack and enjoy.

Spurt

Choose between a long swoshy phase sound or a very fast chopp chopp modulation. Mind the engine to check out the speed.

Power: 9V-18V DC PSU (negative center, 2.1mm)
Current Draw: 5mA (approx)
Read more
MRP:$227.38 SAVE 19%
 1 in stock $184.06
Click for better price!
or call +44 20 7424 1960
quote 782201
KMA Audio Machines Belfry Buffer Quality Buffer Pedal
Cat: 782212 Rel: 31 Jul 20
 
Buffer pedal
Notes: There once was a time where all the streets were grey and dark, filled with dust, dirt and lifeless existence. Humankind was lost and slowly losing its belief in the beauty of the world. Until one day, something began to tower above the smoke-filled chimneys. Something with a serene and clear clang that steered the people out of the darkness and towards the enlightenment they had craved. Open your ears and hear the sweet chime coming from the graceful Belfry Buffer.

The Belfry Buffer is KMA Audio Machines' take on a high-fidelity studio-quality buffer that'll keep your signal safe from the tone-sucking constraints of long cable-runs and epic pedalboards the size of a small spaceship. This leaves your instrument sounding as crisp, clear and natural as if it was going straight into an amp and nothing else.

Belfry sports a unique multi-path design with two buffers running in parallel in order to greatly reduce noise (123dB signal-to-noise ratio and a mind-bogglingly low Total Harmonic Distortion rating of 0,0007%) and to push the output stage for a supremely free-flowing signal.

The Belfry's high 1Meg input impedance ensures that even pedals with a high output impedance can be used before it without any issues, while the low 200Ohm output impedance will guarantee a full frequency spectrum, independent from what's coming after the Belfry.

Hence you won't experience any tone colouration such as the dreaded over-pronounced and shrill highs, which can be typical for many lower quality buffers. With the Belfry, you will simply sound like you again. Nothing less, nothing more.

Powered by a standard 9V DC power supply, the Belfry internally converts this to 18V for massively increased headroom. This helps you preserve your precious core signal and consequently tone, including all the sparkling highs and that nice round and punchy low-end.

In addition, Belfry sports a super-small housing in order for it to fit on or even under your pedalboard without any problems.

So, plug in to the Belfry Buffer and hear your tone ring out as clear as a bell again.

Studio-Quality Dual Buffer - Perfectly restores your tone with zero colouration
Supremely low Total Harmonic Distortion of 0,0007%
Signal-to-noise ratio of 123dB
Extremely small footprint - Will fit on or under any pedalboard
True-Bypass switching
Powered by opt. 9V PSU
(9V DC, centre -, 2.1mm, ~10mA current draw)
Read more
MRP:$115.64 SAVE 20%
 1 in stock $92.03
Click for better price!
or call +44 20 7424 1960
quote 782212
KMA Audio Machines Dead Stag Fuzz/Distortion Pedal
Cat: 782215 Rel: 31 Jul 20
 
Distortion pedal
Notes: Deep black mud is covering his jaws, but the rising sun reveals the glancing brake draped antlers of a majestic dead stag. His massive blast of distortion will tear down even the thickest boondock wilderness and set the world on fire.

The Dead Stag is based on one of the most classic discrete fuzz/distortion circuits in pedal history. This design has been built into countless versions by many pedal builders along the last forty odd years, however KMA wanted to take the evolution further than ever before and give you a Big Muff style pedal, but one with many more tonal options and smart features to make as versatile a fuzz/distortion pedal as possible.

Beneath the active Bass/Treble EQ with a 15db cut/boost, KMA designed a parametric mid EQ with a 12db cut/boost between 400Hz and 2.4kHz. Apart from the internal Q Bandwidth control, every EQ control is on top of the pedal which gives you a ton of tonal options.

From a thick low-end rumble or spitty mid-range, to scooped mids or a low mid hump, everything is possible. The MUD control sets up the grade of distortion, while GROWL controls the overall volume.

In addition, you can choose between two gain levels with the high/low switch and give your high mids a boost at the end of the circuit by the smooth/sharp switch.
Read more
 1 in stock $160.24
KMA Audio Machines Fuzzly Bear Silicium Fuzz Pedal
Cat: 782224 Rel: 31 Jul 20
 
Fuzz pedal
Notes: Holy Spirit of the forest, the Fuzzly Bear fuzz pedal is here, so kick the Switch to unleash the beast!

The sound of this fuzz-pedal is influenced by an old rare and underrated fuzz box from the 1970s, the classic Jordan Boss Tone. The main reason though why this pedal did not conquer the world of effects back in the day, was due to its massive lack of bass. However, the fuzz could be heavenly and ranged from a snake's hiss, to a kitten's purr or it could just be downright nasty and trebly. When you found the sweet spot though, it had such a rich voice and all in a day when most fuzz boxes prided themselves on being overwhelmingly grainy or just downright harsh.

KMA refined the circuit to get the essence of that old-school sound, but with a modern twist. First of all, they brought back the low end and added a bias control to explore lots of new capabilities of this long forgotten pedal.

The essential SKIN/MEAT knob controls the bias of the circuit. You can dial in a sharp skinny fuzzy drive tone or a thick and meaty wall of furry. The GAIN control delivers a whole range of different fuzz shapes.

Back it off to get a dirty chunky overdriven tone, turn it up and your tone becomes thicker and thicker. Set the gain fully clockwise and magic will happen: The smooth decay turns into a starved and gated fuzz sound, perfect for classic tunes.

Powered by an optional standard 9V-18V DC PSU (negative center, 2.1mm, approx. 2mA current draw)

Every pedal is designed, assembled, silkscreened, tested and numbered by hand in our small workshop. Doublesided PCBs designed, tested and assembled by KMA were used, to guarantee a high quality standard and keep the price of the pedals reasonable. The use of an indestructible powdercoated die-cast enclosure ensures maximum durability.



Read more
MRP:$201.39 SAVE 31%
 1 in stock $139.00
KMA Audio Machines Horizont Interdimensional Multispatial JFET Phaser Pedal
Notes: Amazingly versatile phaser business in this brilliantly designed pedal. Watch the demo video to hear the amazing range of sounds this one can do. Best phaser ever? Might just be.

Supplier's Notes:

Jump into spaceship Horizont and begin your trek into star- filled galaxies, all while discovering the incredible vastness of the sounds created by this inter-dimensional multi-spatial stereo analog JFET Phaser. The unexpected is waiting for you behind the far away horizon and it will be a journey you'll never forget!

The Horizont's mission is to push way beyond the classic phasing sounds of yesteryear, and take you to uncharted phaser worlds the second you plug in. By combining lush analog JFET phasing with digitally controlled dynamics, Horizont creates a vivid and expressive modulation experience, all while providing experimental and creative features that'll kick phasing well into the 21st century.

Besides the more common phaser controls, the Horizont offers a plethora of new and exciting options for all the interstellar tone chasers out there. To greatly broaden the range of phasing tones available, KMA implemented a digital LFO with no less than eight different waveforms: Ramp Up/Down, Sine/Triangle/Square wave, a sweeping waveform, Sample & Hold and a random slope waveform going from 20s down to 40ms.

The implemented envelope generator is one of Horizont's absolute key features. It transforms your input signal into a control source to modulate the speed of the digitally controlled LFO or lets you manually phase for a resonant touch wah- like sound, depending on the state of the SWP- and SPURTCONTROL-Switch.

Set the SPURTCONTROL switch to LFO to let the SPURT knob adjust the internal phasing speed. However, by flicking the switch to ENV (Envelope) mode, it allows you to dynamically modulate the speed along the full LFO speed range, based on how loud the input source is (e.g. when you attack the strings hard). You can also combine the SPURT knob and the envelope by flicking the toggle to LFO+ENV where SPURT then sets the minimum speed. For even more control, you can even plug in an external expression pedal/CV-source (0-5V) to alter the minimum speed on-the-fly or you can use the TAP TEMPO switch (tap just twice) to set the speed to fit in with the tempo of your music.

The EXP-Mode switch also lets you choose between a manual phasing mode, controlled by an expression-pedal or an external CV source. Setting the EXP-Mode switch to the middle position will disable any external expression control.
The SWP (Sweep) switch lets you decide to use either the LFO or the envelope of your instrument signal to control the phasing.

The envelope can be set to upwards or downwards operation via the ENV switch, seeing the LFO either slowing down or speeding up, or flipping the orientation when phasing manually from lows to highs and vice versa. In conjunction with the FUEL (Sensitivity) and the DECAY controls, the envelope can be tailored perfectly to your needs.

The EMPH (Emphasis) mode from the original Astrospurt Phaser was kept, but have reworked and refined it extensively for the Horizont. The four toggle-switches determine the stage in which the phase-shifted signal is fed back into itself, while the REG (Regeneration) control sets the feedback amount. We also smoothed out the overall sound of the EMPH mode for a more pronounced, and crisp vocal-like tone. Each of the different switch variations and turn of the REG control will yield different results, seeing you discover new wild, fuzzy and noisy galaxies as you travel deeper down this sonic wormhole.

In order for you to levitate through spacetime, a stereo output has been added to the Horizont. You can switch between a standard stereo output or a panning output, via the STEREOPAN switch. Synchronized with the LFO speed, the upper cycle of the LFO sends the signal to the OUT1 and the bottom cycle to the OUT2. This is without a shadow of a doubt the most liquid and astonishing phasing experience you'll ever embark upon. But wait, there's more! Stop and take a deep breath, set the MIX control to fully clean and the Horizont is transformed into a Tremolo on-the-spot, with all the other aforementioned features.

Last but by no means least, the Horizont was equipped with an FX-Loop right in front of the phase-shifting line. This enables you to add your own secret sonic weapons to this spaceship, seeing you create your very own unique phasing sounds.The pedals' headroom was also increased drastically by boosting the internal circuit voltage to 18V, from the regular 9V input, to give the cleanest phasing possible no matter what instrument or line source you use.



Read more
MRP:$336.52 SAVE 26%
 1 in stock $250.10
KMA Audio Machines Logan Overdrive Pedal With Switchable Mid Boost
Cat: 782231 Rel: 31 Jul 20
 
Overdrive pedal
Notes: Versatile overdrive capable of subtlety or filth. Three-band active EQ allows you to sculpt the tone with a sweepable mid band (with optional expression pedal) and dedicated midrange boost switch.

Supplier's Notes:

Logan is made to transcend the well-known boundaries of overdrive. It doesn't matter if a musician is looking for a pre-amp, a low/mid-gain drive or a screaming resonant cocked-wah sound, Logan will deliver the goods and more! Combined with KMA's active 3-Band EQ, including a fully parametric Mid-EQ with a separate On/Off-Footswitch, Pre or Post Gain position-switch and an expression-in for hands-free filter sweeps, Logan is sure to provide great tones and outstanding flexibility.

Logan's gain structure is carefully balanced for an open and super touch-responsive drive tone, giving you and your instrument ample room to be expressive. You could describe its sound as smooth and harmonically rich, but that would be selling it short. There's a true fire raging under the embers here, one that allows you add more hair, grit and sizzling depth as you pile on the gain, making Logan fit for anything from clean boost, amp-like breakup, indie clang to full-on rock machine.

It also sports an impressively high-headroom-design (up to 25 dB), enabling you to use Logan as a very versatile pre-amp too - all of you amp-less/cab-sim players can thank us later.

But what truly pushes Logan over the edge is its 3-band active EQ. The Bass and Treble EQ knobs are able to both boost or cut your signal by around 15 dB. This enables you to beef up thin-sounding single coils, add some chime to chunky humbuckers or get rid of boomy bass frequencies, when changing from a sweet 2x12 to a fat 4x12 cabinet. In addition, the tonal flexibility is even further extended by Logan's fully parametric Mid-EQ section, where the MID control lets you set your preferred mid frequency between 100 Hz to 2.5 kHz, while the CUT/BOOST control lets you cut or boost the selected frequency by up to 12 dB.

But the frequency fest doesn't stop there. Logan even sports a dedicated footswitch to activate or deactivate the Mid-EQ and a position-switch which lets you place it either before the main gain-stage (PRE) or after it (POST), opening up a whole world of tonal possibilities. Place the Mid-EQ post-gain to give yourself a level boost for solos or place it pre-gain to saturate your preferred frequency even more, effectively giving you a second gain-stage.

Then there's the kicker! You can take complete hands-free control of the Mid-EQ Frequency via a regular expression-pedal. This lets you make instant tone changes on the fly, as well as unleash everything from fast and quacky wah-like sounds to slow and enveloping phasery filter sweeps.

You'd think the feature-well would have run dry by now, but no, there's even more cool sonic secrets under the hood.

The pedal has been set at the factory to sound stellar right out of the box, however some people might want to tweak some more options to taste. Via a hole in the base plate, you get direct access to an internal trim-pot to set the bandwidth (Q) of the Mid-EQ. Turn it counter-clockwise for a broad bandwidth, for smooth frequency sweeps or turn it completely clockwise for really resonant sounds. Removing the base plate will reveal a second trim-pot, which enables you to blend in your clean signal with the overdriven tone, making Logan transcend the world of guitar. Bass? Drums? Synths? Vocals? Bring it on! This pedal will handle it all.

Logan really is an all-in-one overdrive solution and trust us, once you plug in you'll never want to turn it off again!

Powered by an optional standard 9V DC (max.) PSU (negative center, 2.1mm, approx. 30mA current draw)
Read more
MRP:$214.38 SAVE 20%
 1 in stock $171.07
Click for better price!
or call +44 20 7424 1960
quote 782231
KMA Audio Machines Minos Germanium Fuzz Pedal
Cat: 782232 Rel: 31 Jul 20
 
Fuzz pedal
Notes: Conqueror of old lands and cursed with the unholy horned bastard son, King Minos has returned, filled with anger to deliver those ancient tones of fuzz-history!

The Minos is KMA Audio Machines' modern approach to the old-fashioned and beloved three- stage germanium fuzz sound, derived from and inspired by the legendary Tonebender MKII and the unique, but now hard-to-find Superfuzz pedals. However, much more than just mere recreations of these classics, Minos is a versatile tool for many different styles of fuzz sounds and music.

With the INPUT control, you can dial in the perfect amount of pre-gain and bass input. Turn it to the left and it gives you a gritty and crisp overdriven tone, which is perfect for garage and blues, while turning it in the other direction gives you a thick and woolly fuzz.

KMA's attempt of the 'Tonebender-ish' style of pedal has a much broader range of gain structures though. Sweep through any shades of dirty tone, from raunchy low gain distortion to thick angry fuzz.

Every combination of amp and instrument behaves differently, so to help tailor the pedal to your own rig, KMA added some additional tone-shaping controls. Tailor the bass response at the output with the three-way switch. This allows you to choose between lo-fi jangle, punchy low mid or a deep and boomy fuzz that will tear down everything! If it is all too shrill though, you can modify the high-end with the tone-cut, which tames the brightness on full gain.

The overall character of the fuzz can be changed with two internal trim-pots which set the bias of the second and third transistor. Change that bias at your own risk though, as it may unleash the wrath of the Minotaur!

Read more
MRP:$227.38 SAVE 20%
 1 in stock $181.89
Click for better price!
or call +44 20 7424 1960
quote 782232
KMA Audio Machines Moai Maea Analog Octaver Pedal
Cat: 782235 Rel: 31 Jul 20
 
Octaver pedal
Notes: Moai Maea is KMA Audio Machines' answer to long forgotten analog octaver tones. The pedal generates one higher octave and up to two sub-octaves, helping you generate a huge wall of sound by playing just one note.

The higher octave has an edgy and fuzzy character which is reminiscent of old late '60s early '70s octave-up tones, as used by legends like Hendrix or The Stooges. The sub-octaves turn your guitar into a filthy bass guitar with ground shaking lows. Choose between either the first (-I), the second (-II) or both together (-I/-II), which gives you the sought-after wall of sound.

The Moai Maea also gives you the possibility to create an individual mix of each generated octave and the original signal. To expand your soundscapes, the pedal features a serial buffered FX-Loop, within the clean path, plus a phase inverter to avoid phase-cancelation when mixing signals this way. Each octave section is foot-switchable. You can turn on and off the higher octave by jumping on the SHRIEK switch and the sub-octave by the DRONE switch.

So if you are looking for a pedal to you that extra edge for your guitar sound, Moai Maea might well be the nirvana you've been looking for.

Powered by an optional standard 9V-18V DC PSU (negative center, 2.1mm, approx. 20mA current draw)

The Moai Maea is an analog octaver and works monophonic only, not polyphonic! That means for a clean and perfect tracking, you have to play single notes because of the analog circuit design. Keep in mind that chords will sound glitchy, but charming anyway.

Every pedal is designed, assembled, silkscreened, tested and numbered by hand in our small workshop. External manufactured PCBs to guarantee our high quality standard and keep the price of our pedals reasonable. The use of an indestructible powdercoated die-cast enclosure ensures a maximum durability.
Read more
MRP:$245.57 SAVE 25%
 1 in stock $184.06
KMA Audio Machines Queequeg Sub Octave Generator Pedal
Cat: 782237 Rel: 31 Jul 20
 
Octave generator pedal
Notes: Guided by an immortal spirit and encouraged by the old seer's prophecy to plunge into the abyssal sea fulfilling his destiny. He is holding his weapon with ease willing to tame the tremendous beast and showing you the beauty of the deepest sounds. Queequeg - just one man to pave the way for your intense suboctave experience!

Queequeq is KMA Audio Machine's take on a simple, yet massive analog monophonic suboctave generating device. Our aim was to provide a super easy to use and ultra-fast tracking suboctaver in a small footprint that works equally well on guitar, bass and synth, so these classic earth-shakingly awesome tones can find their way to any setup out there.

With its one knob SUB control, you are able to dial in the right blend of the generated suboctave and your clean signal. Queequeq's quick tracking benefits from the all-analog circuit design, giving you a very organic and smooth suboctave sound.

Thickening up your tone slightly, blasting out faux bass-synth resonances or even filling in for a missing bass sound are just some of Queequeg's specialties. The SUB control goes from completely clean on the left, to 100% suboctave action on the right side and with different sonic blends in between.
Your search for an easy to set and great-sounding all analog sub octaver ends right here with the Queequeg.

Powered by an optional standard 9V-18V DC PSU (negative center, 2.1mm, approx. 10mA current draw)
Read more
MRP:$167.61 SAVE 16%
 1 in stock $140.75
Click for better price!
or call +44 20 7424 1960
quote 782237
KMA Audio Machines Strokkur Treble Booster Pedal
Cat: 782243 Rel: 31 Jul 20
 
Treble booster pedal
Notes: Iceland, a place full of myths, miracles and fairy tales. Mighty forces are hidden underneath the barren valley of Haukadalur. A geyser so graceful, that sees you stand still in awe of the pure power of nature. Its name is Strokkur, the namesake of KMA Audio Machines' Germanium Treble-to-full-range Booster.

Strokkur is KMA Audio Machines' inspired take on the iconic Dallas Arbiter Rangemaster. Well known for its power and exploding harmonics when pushing a tube amp on the edge of breakup, this pedal has helped shape and define legendary guitar tones throughout the ages. Now with Strokkur's updated and refined feature-set, these tones are ready to rock and inspire a new generation of players.

Strokkur is equipped with hand-selected NOS AC125 Tungsram transistors in order to stay true to the power and tone of the original, all while standing out from other germanium treble boosters on the market with its additional RANGE control and its two-band EQ-Section. This allows players to perfectly sculpt their own boosted tone, so it'll suit any amp, any instrument and any style!

With its RANGE control, you can dial in anything between the classic treble booster sound to a full range boost, giving you a meaty sound with tight low-mids. The BOOST control, although not in need of much explanation, is very powerful. Set it low and simply use Strokkur as a subtle tone shaper, or begin cranking it and hear your tone shoot and soar into Rock 'N Roll heaven with its mighty 17dB of boost on tap.

KMA added a passive TREBLE and BASS control to fine-tune your sound. TREBLE tames the high frequencies and the transients (>2.4kHz) when the boost is fully cranked, which helps you to quickly find the sonic sweet spot in combination with your amp. BASS helps to prevent overloading the amp by cutting lower frequencies (<240Hz), but leaves the low- mids untouched. Works especially well with humbucker guitars.

Unlike most germanium boosters on the market, Strokkur is fitted with an internal DC converter and hence works with every regular 9V DC supply without fuss. So, plug in your guitar and feel the force of nature!

Read more
MRP:$219.58 SAVE 18%
 1 in stock $180.81
Click for better price!
or call +44 20 7424 1960
quote 782243
KMA Audio Machines Tyler Two Channel Signal Splitter Pedal
Cat: 782246 Rel: 31 Jul 20
 
Signal splitter pedal
Notes: Can you hear the sounds coming from the woods? The steely strikes of an axe are echoing clearly through the forest, alongside the separated heavy thuds of chopped trees falling. It's Tyler - a man, rough and towering, wielding his steely axe with only one aim: Splitting up your sound!

KMA Audio Machines bring you Tyler - The Frequency Splitter. The ultimate tool for developing new sounds and pushing your creativity to new unprecedented heights.

Tyler is an active and variable two channel crossover/signal splitter, which divides your signal with HIGH PASS and LOW PASS paths. Both filters have a 12db/Oct. roll-off with a variable cut-off frequency from 20Hz to 3kHz.

Each channel has its own foot-switchable buffered FX-Loop to process your lows (WOOD) or your highs (STEEL) with independent effects loops in parallel. The MIX knob controls the ratio of the Low Pass and High Pass signals. The range goes from 100% LP over to a 50/50 ratio until 100% HP when set fully clockwise. The mix control has a flat response, with equally chosen cut-off frequencies for the LP and HP to avoid notches or bumps. If required, the LEVEL control can boost your mixed signal up to 14dB.

To avoid any phase-cancellation issues when external pedals are inserted, KMA also added a phase inverter and internal trim pots to better control the impedance for not only the main input, but also for each effects-loop. This is pretty handy when you want to insert your favourite fuzz pedal and get the tone just right.

Some examples of use: Bass players want to retain their low end while using their favourite fuzz or dirt pedal. Insert your dirt box in the highpass FX-Loop and adjust the cut-off frequency of the High and Low Pass to your needs. Dial in your preferred ratio of those Low and High Pass signals, engage the STEEL footswitch and you will never turn off TYLER again! You can also insert different modulation pedals, for example insert a lush phaser for the lows and a nice shimmering delay for the highs and TYLER will make it sound like two different guitars are playing at once. Mix up your modulation pedals with any dirt pedals, for a very pronounced and punchy sound all coming from one amp.

As you can see, TYLER is like a Swiss army knife for your tone, being both a sonic tool and a supreme source of creativity - so take your axe and let the magic happen.

Read more
MRP:$271.55 SAVE 20%
 1 in stock $216.54
Click for better price!
or call +44 20 7424 1960
quote 782246
KMA Audio Machines Wurm Metal Distortion Pedal
Cat: 782248 Rel: 31 Jul 20
 
Distortion pedal
Notes: This dark legend has been told for thousands of years. An old creature, full of grief and malice, it will bring destruction and terror over tracts of the land. Feel the fear and the destructive energy of that ancient monster, with the WURM.

KMA Audio Machines brings you the legendary distortion sound from the out of production Boss HM2 MIJ pedal. Its sound was a key element of the Swedish chainsaw metal, invented by Bands like Dismember and Entombed.

Taking the essential ingredients of this classic, while in the process developing a way more flexible metal-distortion pedal, KMA kept the classic active EQ section and added two more bands, giving a much wider range of tones to tailor your evil and gritty distortion sound. Each band has an internal trim-pot to change the centre frequency and fine-tune your tone.

To switch between the original HM2 high control and the KMA Audio Machines designed EQ bands, KMA added internal DIP switches for even more tonal variations.

Activating Switch 1 alone selects the WURM high-mids mode. To get the classic HM2 'chainsaw' high-mids character however, put switch 1 in the off position and switch 2 to on, crank the LOWS and the HIGH MIDS and rip that Swedish forest to shreds.

Activating both switch 1 and 2 together though gives you three bands, which are controllable via the HIGH MIDS control. TERROR dials in the malice and the evil distortion sound you are searching for! Crank it up and you will feel the rage of the ancient WURM.
Read more
MRP:$253.36 SAVE 17%
 1 in stock $211.12
Artikel 1 bis 12 von 12 auf Seite 1 von 1 anzeigen

Filter

KMA Audio Machines
Release Date
Featured
Close