Juno Daily

Music and tech news, interviews, features, reviews and more.

Visit Juno Daily

100% Sicheres Einkaufen

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Sicheres Einkaufen

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices. Visit Juno DJ

vinyl bestsellers
USD
Meine Sprache
Meine Währung
Your wishlist is empty
Items in wishlist:
Recently added:
Loading...
Cart
Dein Warenkorb ist leer.
Items in cart:
Zwischensumme:
Recently added:
Loading...
Warenkorb anzeigen
Startseite  Labels  

Hungry Robot

Receive new release alerts for Hungry Robot

Filter

Hungry Robot
Release Date
Featured
Artikel 1 bis 8 von 8 auf Seite 1 von 1 anzeigen
Hungry Robot The Collective Complex Fuzz Pedal
Cat: 872177 Rel: 05 May 23
 
The Collective is an over-designed, complex fuzz pedal, a true desert island fuzz designed to please the most ardent fuzz connoisseur.
Notes: The Collective is a brand new fuzz pedal designed by Hungry Robot. The Collective is an over-designed, complex fuzz pedal, a true desert island fuzz designed to please the most ardent fuzz connoisseur. The Collective covers a lot of ground with plenty of external controls as well as over a DOZEN internal parameters to narrow down that perfect fuzz tone. The Collective is a pedal that requires and encourages exploration. The Collective has three fuzz circuits in one box. On top of that there is a 2-band State Variable Filter and a chatotic feedback loop.

Starting at the top of the pedal, the "Conventional" knob is a traditional sounding fuzz. This is meant to balance out the more chaotic fuzz tones and provides a bread-and-butter sound when you need it. The "Low Spectrum" and "High Spectrum" knobs are part of an active State-Variable Filter, similar to the one found on The Lumen. The "Synthetic" knob is a logic based CMOS fuzz that can be described using the words, velcro-ey, synth-ey, gate-ey, and glitch-ey. The "Pristine" knob allows you to blend in your clean signal when you need a bit of pureness to balance out the crazier sounds. On the left is the "Overload" knob. This controls the amount of signal let back through an internal feedback loop. The output of the fuzz is fed back into the input causing self-oscillation and some gnarly textures. Underneath the knob is a dedicated momentary footswitch to activate the feedback loop or you can latch the feedback loop ON by flipping the toggle switch up. On the right is the "Submerge" knob. This is a monophonic sub-octave fuzz. Similar to the "Synthetic" fuzz, this is also CMOS-based, so similar gated, unstable tones. The "Submerge" also has a dedicated momentary footswitch to add in the sub-octave with its own toggle switch that can latch the sub-octave.

Controls

Conventional: Adjusts the volume of the Conventional Fuzz
Synthetic: Adjusts the volume of the Synthetic Fuzz
Pristine: Adjusts the volume of the clean signal.
Overload: Controls how much feedback is looped back into front end when Overload is active.
Latching Toggle Next to Overload: Latches the Overload effect ON when up. When down, the effect is bypassed.
Footswitch Below Overload: Momentary control of Overload effect. Does the opposite of what the Toggle Mode is set to.
Submerge: Amount of Submerge, monophonic sub-octave is sent to the output.
Latching Toggle to Submerge: Latches the Submerge effect ON when up. When down, the effect is bypassed.
Footswitch Below Submerge: Momentary control of Submerge effect. Does the opposite of what the Toggle Mode is set to.
Middle Footswitch: Master Bypass

Technical specifications:

Current Draw: 97 mA
Dimensions: 5.7" x 4.7"
Powering: 9V DC - Negative Center - 2.1mm Barrel
Read more
Tags: Fuzz pedal
MRP:$2,222.36 SAVE 90%
 1 in stock $220.02
Click for better price!
or call +44 20 7424 1960
quote 872177
Hungry Robot The Aether Modulating Delay Effects Pedal
Cat: 912588 Rel: 05 May 23
 
The Aether is a modulating delay pedal.
Notes: The Aether is a modulating delay pedal.

The initial vision for the design of The Aether came shortly after the release of the Wardenclyffe Deluxe. The intention was to take design the philosophies and incorporate tonal characteristics that made the Wardenclyffe so special, but this time as a delay pedal.

At the heart of The Aether is a PT2399, tap tempo delay. It has the standard Echo, Feedback, and Time controls you would expect on any delay, but what makes it special is the Color, Saturation, and Degrade Controls. The Color toggle completely changes the character of the Aether and has two voices: Warm Analog and Bright Tape. The Saturation knob is a gain adjustment that overdrives the delay chip. The Degrade toggle adds lofi textures and artifacts to the delay line. The Degrade toggle removes a very vital section of the delay circuitry that keeps the delay stable with longer delay times. As you increase the delay time, the artifacts become more present and lofi.

The Aether uses a simple, but versatile modulation LFO core inspired by the Wardenclyffe, but with more features. The LFO cores sets it apart from other modulated delays out there. The speed of the modulation core can be set 3 different ways: Rate knob, tap tempo tact switch, and Sync toggle. When the Sync toggle is set to its middle position, the LFO can run at whatever speed you want. When the Sync toggle is in the up position it is synced to the delay time. When the Sync toggle is in the down position, it is synced to delay time, but in half-time for slower evolving moduation. The Shift knob determines the depth of the modulation; this has plenty of range in case you want to get really obscene. The Stray toggle changes the LFO from a typical Sine wave to a Slewed Random waveform. Creative exploration of the modulation section of The Aether is strongly encouraged. The way the delay rate and LFO rate interact with each other can yield very creative results.
Read more
 2 in stock $248.44
Click for better price!
or call +44 20 7424 1960
quote 912588
Hungry Robot The Wash V2 Tap Tempo Delay With Wash Reverb Pedal
Cat: 780920 Rel: 03 Sep 20
 
Delay/reverb pedal
Notes: The Wash is a dream come true for ambient player and ushers in a new chapter in the world of delays. It accomplishes the arduous task of creating an organic, below-the-mix wash. Normally this requires stacking 3-4 reverb and delay pedals at the end of your chain. The unique "Wash Circuit" creates the perfect wash with only one pedal.

For the new version (V2), Hungry Robots worked hard to squeeze the circuit into a smaller enclosure while keeping the build quality and tone quality identical. The circuit that hundreds of users have fell in love with is unchanged. The new versions are 2 inches smaller left and right. In addition to the smaller enclosure, the new option for top mounted jacks can save you a lot of board space.

At its most basic utility, The Wash is an outstanding analog-voiced, tap-tempo delay with just over 1000ms of delay time.

The Wash circuit is what makes the pedal stand out from other delays on the market. The Wash circuit adds reverb to the signal and through a complicated network of internal feedback loops, subtle multi-head Binson effect, and what is known as "ripple effect," It works to add a hauntingly beautiful wash to your signal in ways that can't be accomplished by stacking a reverb and a delay in series. It does all of this while keeping the clarity and presence of your original signal without getting lost in the soup of decay.

The Wash reacts to your playing unlike the common DSP reverb/delays with an infinate sustain function. There is a dynamic quality to it that is hard to replicate with any other single pedal.

The "Ripple" knob controls The Ripple Effect. The Ripple Effect is a feature in which each successive delay trail slowly scatters and transforms into reverb. The "Resonance" knob is to fine-tune the resonance and decay of the wash. The Middle "The Wash" knob controls the mix/level of the wash.

Current Draw: 92-93 mA

Switching: True-Bypass

Dimensions: 4.7" x 3.7" x 1.96"

Powering: 9V DC - Negative Center - 2.1mm Barrel
Read more
 1 in stock $217.91
Click for better price!
or call +44 20 7424 1960
quote 780920
Hungry Robot The Moby Dick V2 Lofi Tape Delay With Modulation & Tap Tempo Pedal
Notes: The Moby Dick V2 brings up to date one of the first pedals that put Hungry Robot on the map. The original Moby Dick is well known for its chimey, tape-emulating delay line with slight lo-fi imperfections and subtle modulation; a "back-to-basics" delay in the world of multi-mode DSP delays.

The V2 has an obviously smaller footprint, but the most exciting changes lie in the circuit updates. When working on the V2, Hunry Robots wanted to further explore the sonic capabilities of the Moby Dick tape-emulation, rather than a miniature version of the pedal- specifically in a lo-fi, wrecked-tape context.

One of the magical qualities of recording to tape is the lovely saturation. The original Moby Dick had a gritty, saturated quality, but in the V2, this quality was pushed to its limit. A "Lo-Fi" knob which allows you to dial in additional tape saturation to the delay line. This is done by applying pre-gain amplification to the front end of the delay chip, resulting in a wonderfully organic character when gain is applied.

The capabilities of the modulation were also expanded. The original Moby Dick had a very subtle chorusing effect. Though it sounded great, it was admittedly subtle. The V2 increases the modulation depth dramatically, allowing it to travel beyond subtle chorusing into more extreme pitch bending territory. The "Mod" in conjunction with a cranked "Lo-Fi" knob creates the most amazing broken tape-deck quality, but when these knobs are dialed back it retains the overall character of the original.

Current Draw: 30 mA

Switching: True-Bypass

Dimensions: 4.7" x 2.6" x 1.5"

Delay Time: Approximately 1000ms

Powering: 9V DC - Negative Center - 2.1mm Barrel
Read more
 1 in stock $174.75
Hungry Robot Looping ADSR Desktop Module
Cat: 780975 Rel: 03 Sep 20
 
ASDR module
Notes: The Looping ADSR is an extremely versatile envelope generator. It can act as a traditional ADSR envelope requiring a gate signal to activate or as a looping ADSR. Envelopes can be output with both linear and exponential curves. In Loop Mode it repeats the cycle of Attack, Decay, & Release. Once the Release phase is complete, it loops back to the Attack and begins the cycle again. The Looped envelope can be further manipulated with the Loop Scale knob. Loop Scale shrinks the overall size of the envelope while keeping the ratio of A:D:R identical. All knobs on the Looping ADSR have CV input. As with all Hungry Robot "Modular Boxes" the Looping ADSR can be powered with a simple 9V DC, Negative Center power supply.

KNOBS
-ATTACK: Sets the attack length (1st stage of ADSR cycle). Determines how long it takes to come to full voltage after gate is applied (up to 10 sec.)
-DECAY: Sets the decay length (2nd stage of ADSR cycle). Determines how long it takes to go from full voltage to sustain voltage (up to 10 sec.)
-SUSTAIN: Sets the sustain level. Determines what voltage the envelope returns to after decay stage
-RELEASE: Sets the release length (Final stage of ADSR cycle). Determine how long it takes to return to 0V after gate is released (up to 10 sec.)
-LOOP SCALE: When in loop mode, this knob scales down the length of the envelope while keeping the ratios identical

SWITCHES
-LIN/EXP: Selects the envelope type: linear vs. exponential curve
-LOOP/ADSR: Switches between Loop and ADSR mode. LOOP turns the loop on. ADSR is a traditional ADSR requiring a gate signal
-RPT./GATE: Works only in LOOP mode. RPT. automatically repeats the loop without a gate. GATE mode requires a gate to begin looping.

PATCH POINTS
-LS.CV: CV input for Loop Scale. Allows for CV control of this parameter.
-A.CV: CV input for Attack. Allows for CV control of this parameter.
-D.CV: CV input for Decay. Allows for CV control of this parameter.
-S.CV: CV input for Sustain. Allows for CV control of this parameter.
-R.CV: CV input for Release. Allows for CV control of this parameter.
-GATE: Gate input for ADSR mode as well as Gate/Loop mode
-OUT: Output of final envelope for all modes.

Dimensions: 4.7" x 3.7" x 1.96"
Power: 9V DC - Negative Center - 2.1mm Barrel
Read more
 1 in stock $157.65
Click for better price!
or call +44 20 7424 1960
quote 780975
Hungry Robot Sample & Hold Desktop Module
Cat: 780982 Rel: 03 Sep 20
 
Sample & hold module
Notes: The Hungry Robot Sample & Hold provides basic S&H functionality with some added bells and whistles. It uses an internal clock dialed into a very useful range. If the internal clock rate is not to your liking, you can bypass the Rate knob by patching a clock signal into Clk In. The Sample & Hold has a built in attenuverter giving a bit of added control over the random voltages that are outputted. White noise out for uses elsewhere. Traditionally a S&H samples voltages from chaotic white noise, but E.In allows you to bypass the white noise and patch in your own sample source (i.e. patching an LFO in for a bit crushed LFO). As with all Hungry Robot "Modular Boxes" the Sample & Hold can be powered with a simple 9V DC, Negative Center power supply.

KNOBS
-MINUS/PLUS: Attenuverter for output. Allows you to sweep between positive and negative voltage outputs.
-RATE: On board clock source ranging from approximately 25ms to 1000ms.

PATCH POINTS
-E.IN: Bypasses internal white noise as a sample source. Patch in any CV source that you want to sample from
-STATIC: Taps into white noise output (0-5V range)
-CLK IN: Bypasses internal clock with your provided external clock
-S&H OUT: Two buffered outputs of S&H voltage

Dimensions: 4.7" x 2.6" x 1.5"
Power: 9V DC - Negative Center - 2.1mm Barrel
Read more
 1 in stock $135.27
Click for better price!
or call +44 20 7424 1960
quote 780982
Hungry Robot VCF Desktop Module
Cat: 780987 Rel: 03 Sep 20
 
VCF module
Notes: Lovely little mono filter module in a compact desktop format. Based on the classic Prophet 5 filter, ideal for processing synths and signals, hooking up to Eurorack or other Hungry Robot modules.

Supplier's Notes:

The Hungry Robot VCF is an all analog, 4-pole low pass filter with a self-oscillating resonance control. It is a close replication of the filter circuit found on the famous Prophet 5. It uses a HM2040 which is a high quality, faithful replication of the original SSM2040 chip. This resonant filter has a beautiful tonal quality. The over-sized knobs provide a satisfying tactile response. The cutoff frequency can be controlled by external control voltage. It has a built-in attenuator and invert switch for the incoming CV. CV input does not track at 1V/Oct, but is scaled to act as a VCA when a 5V signal is applied to CV input. As with all Hungry Robot "Modular Boxes" the VCF can be powered by a simple 9V DC, Negative Center power supply.

KNOBS
-FREQUENCY: Sweeps the cutoff frequency of the filter.
-CV: Attenuator for incoming CV input.
-RESONANCE: Sets resonance of filter. Small volume drop is to be expected. Will self-oscillate at higher settings.

SWITCHES
-INVERT: Inverts the incoming CV input. Toggle to the right to invert incoming CV

PATCH POINTS
-IN: Patch Audio Signal In
-CV: CV input for Frequency. Allows for CV control of this parameter.
-OUT: Patch Audio Signal Out

Dimensions: 4.7" x 2.6" x 1.5"
Power: 9V DC - Negative Center - 2.1mm Barrel
Read more
 1 in stock $134.23
Hungry Robot Mixer Desktop Module
Cat: 780992 Rel: 03 Sep 20
 
Mixer module
Notes: The 4 Channel Mixer is a basic DC coupled mixer with 4 inputs and 4 attenuators. DC coupled means that it will accept both DC and AC (Audio) signals. As with all Hungry Robot "Modular Boxes" the 4 Channel Mixer can be powered with a simple 9V DC, Negative Center power supply.

PATCH POINTS
-IN (x4): Patch in any audio or CV signal to any of the 4 inputs. (NOTE: Avoid mixing CV and Audio)
-OUT: This output is the sum of the four channels

KNOBS
-LEVEL (x4): Each input has its own attenuator that allow you to bring down the level of the inputs

Dimensions: 4.7" x 2.6" x 1.5"
Power: 9V DC - Negative Center - 2.1mm Barrel
Read more
 1 in stock $90.28
Click for better price!
or call +44 20 7424 1960
quote 780992
Artikel 1 bis 8 von 8 auf Seite 1 von 1 anzeigen
Cart subtotal: