100% Sicheres Einkaufen

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Sicheres Einkaufen

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Synthesizer

Startseite  Equipment  

Synthesizer

Options
Artikel 1 bis 6 von 6 auf Seite 1 von 1 anzeigen
Subscribe to our weekly Studio Equipment emails
FORTHCOMING
Division 6 Business Card Sequencer V2
Cat: 777968
 
business card sequencer
Notes: The Division 6 packs a lot of sequencer into a tiny package! This 16-step circuit can work as a sequencer or as a handheld keyboard.

Specifications:
Power In: 7-15VDC, tip positive through a 3.5mm jack. Find a voltage source on your synth to power it if you can! A 9V battery or AC adapter will work too.

Power supply: 7-15VDC (reverse-polarity protected!)
Power connection: 3.5mm phone jack, center-positive
Current draw: 15ma
Dimensions: 3.5" x 2" (the same as a business card!)
Read more
MRP:$108.50 SAVE 19%
coming soon $88.22
FORTHCOMING
Division 6 Business Card Synthesizer (fully assembled)
Cat: 777973
 
business card synthesiser
Notes: The Business Card Synthesizer is a tiny synth that can be connected to a Business Card Sequencer, other synth gear, or played by itself.

Headphones can be connected directly to the output of the synth, and there are plenty of knobs to play with, so you can easily make noises anywhere. Great for learning about synthesizers!

S&H Button: Enables Sample & Hold, which disables the external CV IN jack and uses LFO1 and LFO2 to determine oscillator pitch. LFO1 sets the sample rate (SHAPE is ignored for this), and LFO2 is the wave that gets sampled.

GATE Button: Manually turns on the gate so sound comes out of the synth. This control is momentary, but you can latch it on by tapping the S&H button while holding the GATE button down.

COARSE TUNE: Adjusts the pitch of the oscillator up or down in large increments

FINE TUNE: Adjusts the pitch of the oscillator up or down in fine increments

SHAPE: Changes the shape of the wave produced by the main oscillator (VCO). Turning this control fully CW gives you a triangle wave. Start turning it CCW takes you through sawtooth/ramp, then at about the 12:00 position you get a square wave. Continue turning it CCW and you get several higher duty cycle square waves
.
GLIDE: Adjusts the rate at which the pitch of the VCO takes to go between pitches (whether changed by the COARSE TUNE knob or CV IN). Fully CCW causes the pitch to react almost instantly, while fully CW makes it take its sweet time.

LFO 1 / LFO 2 SHAPE: Changes the shape of the waves produced by the low-frequency oscillators (LFOs). The shapes are similar to those of the VCO, except that the LFOs have sawtooth/ramp waves that go both up and down (since you can actually hear the difference at LFO rates).

LFO 1 / LFO 2 RATE: Controls how fast the LFOs go.

LFO -> VCO: Routes the two LFOs to control the pitch of the main oscillator. The 12:00 position is basically "off", and the LFOs have no effect on pitch. Start turning the control CCW and LFO1 starts changing the pitch of the VCO. Maximum effect is at about 10:00. Continuing to turn the control starts to bring in LFO2 as well. All the way CCW gives you full effect from both LFO1 and LFO2.

Turning the control CW from 12:00 does essentially the same thing, but brings in LFO2 first, then LFO1.

This might seem like kind of a weird control, but it gives you quite a bit of routing flexibility with one knob. You can have no pitch modulation, LFO1, LFO2, LFO1 with a little LFO2, or LFO2 with a little LFO1.

LFO -> VCA: Routes the two LFOs to control the amplitude of the oscillator. (See LFO -> VCO control description above for more information about how the control works.)

ATTACK: Controls how fast the audio amplitude fades in when the gate is triggered. CCW is fast and CW is slow.

DECAY: Controls how fast the audio amplitude fades out when the gate is released. CCW is fast and CW is slow.

VOLUME: Controls the overall volume of the signal coming from AUDIO OUT.

FILTER: Changes the cutoff frequency of an analog low-pass filter. Turn the knob fully CW and all frequencies (that you can hear) are let through. Start turning it CCW and the high frequencies start getting cut off, until the sound becomes muddy / muffled. Use in conjunction with the SHAPE control to get the tonal quality you are looking for.

Connections:
CV IN: Accepts a 1 volt/octave control voltage to control the pitch of the oscillator. It responds from about 0-5V, but voltages outside of this range won't cause damage. The CV input is quantized, so only valid (western scale) notes are played. This input is ignored when Sample & Hold is enabled.
GATE IN: A voltage greater than about 2.5V will turn on the gate and allow audio to come out the output of the synth.
AUDIO OUT: Connect to an amplifier or another synth. The jack has both the tip and ring connected, so you can even use stereo headphones and hear sound from both ears.
Power: Connect 7.5-15VDC to this 3.5mm TS jack to power the synthesizer. The tip is positive (don't worry, there's a protection diode in case you get it reversed). You can get power from a 9V battery, AC adapter, or you may even be able to find an output on your modular synthesizer that can provide enough current.

Specifications:
Power supply: 7-15VDC (reverse-polarity protected!)
Power connection: 3.5mm phone jack, center-positive
Current draw: 15ma
Dimensions: 3.5" x 2" (the same as a business card!)
Read more
MRP:$108.50 SAVE 19%
coming soon $88.22
Teenage Engineering PO137 Rick & Morty Pocket Operator Vocal Synthesiser & Sequencer With Built In Microphone
Cat: 737279 Rel: 14 Nov 19
 
Rick & Morty limited edition synth & sequencer pocket operator
Notes: Everyone's favourite dimension-hopping animated weirdos finally join the synth game. Eight voice character modes and unique Rick & Morty visuals. Utterly bonkers. We love it. Wubba lubba dub dub indeed.

Supplier's notes:
The Emmy award-winning producer Justin Roiland has stepped into the role of inventive mad scientist collaborating with Teenage Engineering. Together, they have created a limited-edition Pocket Operator (PO-137), a vocal synthesiser and sequencer with built-in microphone offering 8 different voice character sampling options, all voiced by Roiland himself plus all new custom Rick and Morty visuals.

Other features of the PO-137 include an animated LCD display, folding stand, 120-seconds sample memory, alarm clock and much more.
Read more
MRP:$111.11 SAVE 25%
 2 in stock $83.16
Teenage Engineering PO16 Pocket Operator Factory Synthesizer
Cat: 560993 Rel: 05 May 15
 
Melody synthesiser and sequencer with parameter locks, punch-in effects, arpeggio and chord play styles.
Notes: Melody synthesizer and sequencer with parameter locks, punch-in effects, arpeggio and chord play styles.

Pocket operators are cleverly designed on a single circuit board. By placing all vital and sensitive components under the LCD display there's no need for an outer case. By saving this cost, high quality components could be used to guarantee the best possible sound and very low power consumption. The space under the display also doubles as a speaker box.

Experience a fresh new way to create music using your thumbs. With its pocket size, its animated graphics, real synthesizer engines, sync, punch-in effects, built-in speaker, alarm clock and impossibly low price, making electronic music has never been this much fun!
Read more
MRP:$71.90 SAVE 21%
 2 in stock $56.64
Teenage Engineering PO20 Pocket Operator Arcade Synthesizer
Cat: 599814 Rel: 03 Feb 16
 
Pocket sized arcade synthesiser
Notes: Arcade-themed synth from Teenage Engineering's amazing Pocket Operator range. Tiny portable synth with quirky chiptune-style sounds, built-in sequencer effects. Super fun.

Supplier's notes:
Arcade synthesizer and sequencer, with parameter locks, chord control and punch-in effects.

All pocket operator models perfectly complement each other. From drum machine, bass and lead synthesisers to noise percussion, the six unique units allow you to start a pocket band. Use them separately or connect them together, the choice is yours.

Use the built-in speaker for instant sound, connect a pair of headphones for detailed personal listening, or hook up a speaker system and the club will go boom!

Pocket operators are designed on a single multiple-layer circuit board using high quality components. They all share a compact and durable form factor.

By placing all vital and sensitive components under the LCD display there's no need for an outer case. By saving this cost, high quality components could be used to guarantee the best possible sound and very low power consumption. The space under the display also doubles as a speaker box.

Optional extras:
Add the silicone pro case to protect your pocket operator and get anti-slip feet, neck strap, battery protection and pro feel buttons. Use the SP-10 display protection to protect the LCD screen, and start a jam sync session with your friends using the MC-3 mini cables.
Read more
MRP:$71.90 SAVE 23%
 1 in stock $55.06
Teenage Engineering PO28 Pocket Operator Robot Live Synthesizer
Cat: 599823 Rel: 03 Feb 16
 
Pocket-sized live synthesiser with real 8-bit synthesiser engines
Notes: Live synthesizer and sequencer, with parameter locks, glide control and punch-in effects.

All pocket operator models perfectly complement each other. From drum machine, bass and lead synthesisers to noise percussion, the six unique units allow you to start a pocket band. Use them separately or connect them together, the choice is yours.

Use the built-in speaker for instant sound, connect a pair of headphones for detailed personal listening, or hook up a speaker system and the club will go boom!

Pocket operators are designed on a single multiple-layer circuit board using high quality components. They all share a compact and durable form factor.

By placing all vital and sensitive components under the LCD display there's no need for an outer case. By saving this cost, high quality components could be used to guarantee the best possible sound and very low power consumption. The space under the display also doubles as a speaker box.

Optional extras:
Add the silicone pro case to protect your pocket operator and get anti-slip feet, neck strap, battery protection and pro feel buttons. Use the SP-10 display protection to protect the LCD screen, and start a jam sync session with your friends using the MC-3 mini cables.
Read more
MRP:$71.90 SAVE 23%
 1 in stock $55.06
Artikel 1 bis 6 von 6 auf Seite 1 von 1 anzeigen

Filter

Synthesizer
DJ-Ausrüstung
Release Date
Featured
Close