100% Sicheres Einkaufen

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Sicheres Einkaufen

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Synth modules

Startseite  Equipment  

Synth modules

Options
Artikel 1 bis 50 von 997 auf Seite 1 von 20 anzeigen
1  2  3  ...  20  »
Subscribe to our weekly Studio Equipment emails
Cat: 660457 Rel: 29 Aug 17
 
10HP Eurorack module generating warm, lush chorus & vibrato effects
Notes: An instant classic just like the pedal with sparkly compression sweeping through lush dreamy chorus to the hypnotic vibrato of low-fidelity warped vinyl-like goodness.

Controls are:

- Knobs and CV ins for Compression/LoFi vibrato mix, Speed, Depth, and Dry-Wet
- Three selectable wave shapes and CV in for modulation control

This module was designed to emulate the sounds and textures of the Lo-Fi Loop Junky in real time, but it goes far beyond that. Click it on and mix your sparkly clear compressed signal with the smashed, lo-fidelity warbled signal and listen to it become a luscious emulsification that can be blended to the most perfect depth. Achieve new haunting chorus sounds and pulsating vibrato. Unusual and fun, you've never heard anything quite like it.
Read more
 2 in stock $289.22
Cat: 660454 Rel: 29 Aug 17
 
14HP Eurorack fuzz & overdrive synth module
Notes: You've been waiting all your life for the ZVEX Fuzz Factory Eurorack module. Over the years there have been many requests from the synth community for a Fuzz Factory that would behave the same way for them as the Fuzz Factory does for guitarists. The self oscillation, the gating, the gooey, sticky fuzz, all of that strange wonderful interactive excitement has arrived in this incredibly controllable box of mayhem...

Basic controls include:

- Three position range switch settings of 0db, -20db, and -40db, critical for fixing the operating level
- Knobs and CV ins for the standard Fuzz Factory controls Gate, Comp, Drive, and Stab
- New knobs and CV ins for Input Level, Input Impedance, Fatness and Dry/Wet mix
Read more
 1 in stock $290.25
Cat: 689804 Rel: 03 Sep 18
 
Innovative quad envelope - 10HP
Notes: Zadar is a powerful, four-channel envelope, modulation, and transient generator, in a compact yet very complete, feature-rich package. It is capable of synthesising a vast palette of envelope shapes starting from hundreds of shapes stored in the memory. These starting shapes are not mere wavetables, but flexible vectors that can be stretched (from a fraction of a millisecond to half an hour), flipped, warped, distorted, delayed, shuffled, repeated, and amplitude modulated in real time. A set of freely assignable CV inputs allows for external control of most parameters. Each channel can work independently or combined with other channels within one of the chaining and looping algorithms.

Operating Zadar is quick and immediate, thanks to its accessible interface and crisp OLED display. The main screen displays all parameters together with the currently selected shape. Entering the simple 3-page menu is needed only for advanced settings.
Read more
 More than 10 in stock $278.81
Cat: 633370 Rel: 28 Nov 16
 
Voltage distributor synth utility module
Notes: Warna is a very useful utility module that helps you to manage control voltages in the system. Crammed in just 6 hp, there are five normalled sections: two buffered mults, two inverters, and a summing mixer. Each multiple routes the input signal to separated outputs without loss in voltage. Warna is designed for unity gain - if you apply a specific voltage to any input, it remains the same on the respective outputs. Inverters are hardwired to mults and invert the polarity of the signal applied to them. Both mults are also normalled to the mixer section via inputs. Patching anything to these inputs breaks the normalization.

The top and the bottom section both are buffered 1-in-4 multiples. The input can be inverted with a switch, i.e. its polarity will be changed by 180 degrees. Four inverted copies are then available at the outputs, meaning you can use these two sections as inverter. Bi-polar LEDs display whether the signal is positive or negative: yellow = negative, red = positive. The centre section is a four-input summing stage with amplification factor 1, a so-called unity-gain mixer. The multiples are normalized to the mixer which can be deactivated by patching.
Read more
 1 in stock $80.10
Cat: 657758 Rel: 21 Jul 17
 
Compact step sequencer & modulation source module - 6HP
Notes: Tirana is a super-compact step sequencer and modulation source, serving as the utility module for supporting other sequencing devices, but due to a suite of smart features, the module shines on its own terms. Tirana sports unipolar and bipolar voltages, mutable step triggering, transposition, and direction change controlled externally via CV. The step repeat function and virtually infinite expandability make it even more powerful.
Read more
 3 in stock $168.53
Cat: 671740 Rel: 04 Dec 17
 
Dual voltage control amplifier & overdrive - 6HP
Notes: Tallin is a dual voltage controlled amplifier (VCA) with overdrive, offering some unusual control features and a range of attractive tonal characteristics. Each of the two identical channels offers two simultaneously available inputs for voltage control over signal attenuation or gain, with linear and exponential response to CV. Volume control knobs offer manual gain settings ranging from fully closed (-80dB) up to +18dB. A colour LED indicator displays output signal levels. A soft-clip circuit avoids harsh clipping distortion, while a switchable overdrive circuit offers two carefully crafted distortion responses, simulating the sound of classic tube amplifiers.

Since both CV inputs are simultaneously active, they can be jointly exploited within patches featuring more complex volume control that otherwise would require using two traditional VCAs in series. As the signal path is DC-coupled, Tallin can also be used for handling the control voltages.
Read more
 3 in stock $142.53
Cat: 676518 Rel: 15 Feb 18
 
Multi-function Eurorack module - 10HP
Notes: Sewastopol is a multifunction Eurorack module designed for easy interfacing of external gear to your modular environment. It can export line and professional level audio, import audio from instruments and electroacoustic transducers, and analyse the incoming audio to generate voltages and triggers to control your modular system.

This is a second, vastly improved revision to the original 2014 Sewastopol, featuring a completely redesigned preamplifier circuit, better ergonomics and various other improvements.
Read more
 3 in stock $237.18
Cat: 633371 Rel: 14 Feb 17
 
Multi-tool synth module for audio signals & control voltages
Notes: Samara is a "Swiss Army Knife" type of module, intended to serve the most common voltage and audio signal processing purposes such as attenuation, offsetting, mixing, inverting, and even basic waveshaping. Samara features four channels, each with two inputs and an attenuator, additional switchable offset generators, four voltage level and polarity indicators, two adders with switchable scale, and a precision four-channel processor that selects minimum and maximum voltage.
Read more
 1 in stock $164.38
Cat: 689812 Rel: 22 Nov 19
 
Addiditive synthesis engine
Notes: Additive synthesis oscillator based on the concept of building up harmonics from sine waves. A complex idea nicely executed for ease of use.

Suppliers notes:
Odessa implements the principle of additive synthesis controlled by a set of carefully tailored macro parameters to harness thousands of sinusoidal partials that altogether form the resulting sound.

The interface is kept simple and accessible, so you can easily build rich and full, great sounding timbres of very complex spectra, that can be either harmonic or inharmonic. Even though inharmonic spectra yield non-periodic waveforms, all partials are frequency related to the common fundamental controlled by a V/oct input. The series of harmonics can be squeezed or spread apart, tilt, and pruned by a comb-like frequency response, resulting in a variety of unearthy sounds. Animating the comb response yields radical effects similar to flanging and phasing. Additional, often sought after features are implemented: through-zero linear frequency modulation, and unison detune: up to 5 copies of the sound can be spread apart for a fat and dense cluster of voices.

There are nine parameters, each controlled by a dedicated knob, so the workflow is as smooth and immediate as possible. Furthermore, every parameter has a dedicated CV input, allowing live animation for organic audio effects. Odessa sports two main outputs for banks of harmonic partials that can be further scaled in frequency, as well as an additional output that can either spit out a square wave or a single sinusoid of the fundamental frequency. Interesting spatial effects, crazy modulation feedbacks as well as synchronisation is possible that way.

The hardware is based on a powerful FPGA chip offering massive parallel computing. The synthesized signal is devoid of aliasing through the entire audio range thanks to intrinsically bandlimited algorithm. A simplified spectral analyser helps you to keep a visual track of what is actually happening to the harmonics.

For even more control over Odessa, you can use the Leibniz subsystem (or just the Lipsk) that can be connected to a header at the back of the module.
Read more
 1 in stock $424.46
Cat: 718920 Rel: 23 Apr 19
 
Expansion module for Zadar - 3HP
Notes: An expander for Zadar, adding one more assignable input for each Zadar channel and manual triggers.
Read more
 3 in stock $59.30
Click for better price!
or call +44 20 7424 1960
quote 718920
Cat: 758859 Rel: 16 Dec 19
 
Digital waveshaper that transforms your oscillators into 8-bit sounds
Notes: Bonkers digital processing business from Xaoc. Crunchy 8-bit waveshaping, additive Walsh synthesis, freaky modulation. Wild stuff.

Supplier notes:
The new component of the Leibniz Subsystem which operates on signals and voltages through manipulating binary 8-bit numbers. Jena connects to the Drezno module in a loopback. A binary transfunctioner maps input functions (e.g. waveshapes) to some other functions through the classic table look-up mechanism. Input 8-bit values are treated as indices to an internal memory map. The value read from successive locations of the memory are passed to the output.

A simple VCO sawtooth or a triangle wave may be transformed to a plethora of waveshapes from any of the shape banks, with additional, deep through-zero phase modulation. Individual bit outputs may be used to produce interesting signals as well. There is a dedicated bank of Walsh functions - with these signals you can perform additive Walsh synthesis, not very common in Eurorack, but a quite powerful technique.

Transforming slow waveforms to sequences of binary signals is a great way to create rhythmic drum patterns. Jena comes with a special bank that has plenty of such patterns - just connect up to 8 drum voices to individual bit outputs on Jena. The rhythms can be selected or morphed on the fly through external CV input.

Obviously, being limited to 8 bits both in phase and signal value, Jena will not deliver crystal clear timbres you may know from many wavetable oscillators. Instead, it offers buzzy, jittery and gritty sounds as well as jerky and skippy rhythms, just like vintage computers, that were sometimes unreliable and unpredictable.
Read more
 1 in stock $233.04
Cat: 718919 Rel: 23 Apr 19
 
Expander for XAOC Devices Praga mixer
Notes: The XAOC HRAD is an expander for their Praga voltage-controlled mixing console, adding CV control for Aux levels, master level control, gate-controlled muting, and other powerful features.

- Additional set of controls for the PRAGA mixer
- Stereo sum level control
- Euro/line switchable output level
- Sum LED meters
- Stereo headphone amp
- Cue input
- Mix/solo cue auditioning
- Individual AUX inserts
- Voltage control over AUX send amount
- Two stereo controls for AUX return level
- Gate inputs for VC channel muting
- Power drawn from Praga
Read more
 1 in stock $233.04
Cat: 621354 Rel: 28 Nov 16
 
Quadruple Low Frequency Oscillator (LFO) synth module in Eurorack format - 10HP wide
Notes: Batumi is a fully voltage controlled, quadruple digital LFO module with a slew of interesting and user-customizable features. Each oscillator can be used independently or in one of 3 synchronized modes: quadrature, phase and divide. For each oscillator, there are sine, square and assignable (saw, ramp, triangle and trapezoid) waveform otputs available. Voltage control is possible for each oscillator's frequency, reset, and external sync ("tap tempo"). The total frequency range spans from 28 hours in voltage controlled divide mode, up to 500 Hz.
Read more
 9 in stock $247.60
WMD/SSF Ultrafold Module (synth module)
Cat: 588817 Rel: 02 Oct 15
 
Voltage controlled wave folder synthesiser module - 6HP wide
Notes: ULTRAFOLD is a powerful voltage controlled wave folder.

The input drive and wave fold controls make up the heart of the design, providing warm saturation and additive harmonics to the input signal.

The wave shift control offsets the input signal to allow for asymmetrical folding - unveiling the subtleties in the distribution of spectral content.

The novel bipolar feedback control takes wave folding to a new level by returning the folded output to the input, thereby skewing the wave shapes for dramatic changes to the upper harmonics.

An auxiliary feedback input is provided to allow for insane folded FM sounds when another oscillator drives this input.

Power Draw: +30mA, -30mA. 6HP width. 25mm Depth.
Read more
MRP:$210.98 SAVE 17%
 1 in stock $174.76
Click for better price!
or call +44 20 7424 1960
quote 588817
Cat: 588816 Rel: 02 Oct 15
 
Saw-core voltage controlled oscillator (VCO) synthesiser module - 10HP wide
Notes: SPECTRUM is a precision, saw-core VCO with eight possible waveforms (six simultaneous outputs), an eight octave switch, LFO mode and FM mode select with attenuation.

In addition to the standard waveforms; sine, pulse, triangle and saw, SPECTRUM features two selectable saw/pulse hybrid waveforms and two selectable sub-octave waveforms with variable range.

Additional features include pulse width modulation with CV and attenuation, hard sync and panel accessible 1V/OCT calibration.

Power Draw: +80mA, -55mA. 10HP width. 25mm Depth.
Read more
MRP:$293.37 SAVE 24%
 2 in stock $222.63
Cat: 588813 Rel: 02 Oct 15
 
Passive quad attenuator synthesiser module - 4HP wide
Notes: QUAD ATTEN is a passive quad attenuator in a small 4hp profile.

Although quite basic, attenuators are extremely powerful in a modular system.

They are especially useful for adjusting the depth of control voltages going into modules that lack CV attenuators.

Power Draw: +0mA, -0mA (Passive). 6HP width. 25mm Depth.
Read more
MRP:$81.15 SAVE 21%
 4 in stock $64.49
Click for better price!
or call +44 20 7424 1960
quote 588813
Cat: 640973 Rel: 27 Feb 17
 
Tempo-syncable modulation source module - 6HP
Notes: The Modbox is a tempo syncable modulation source with a three-phase LFO, CV Skewable LFO, Sample and Hold, and White Noise generator.

LFO 1 is a three-phase LFO with independent outputs for each phase which are set at 0, 120, and 240 degrees. Shape can be switched between Sine, Triangle, and Saw with a push of a button.

LFO 2 is a Skewable LFO with three shapes. The LFO shape can be smoothly changed from a Ramp through Triangle to Saw wave shapes. The skew shape can be changed with the Skew knob or with CV

The Sample and Hold circuit's clock is normalled to the 2nd LFO but can be clocked externally as well. The sample and hold samples voltage from and internal white noise source. There is also an input for an external sample source. White noise has its own output as well for use with other modules and applications.

Both LFOs can be sync'd to an external clock source by holding the wave shape button for different lengths of time. As they are independent of each other, one can be sync'd while the other runs free like a gazelle on an African plain.

Tempo sync calculates the time between incoming clocks and reacts instantly to each new clock pulse. Each rate knob becomes a multiplier/divider when sync is engaged.
Read more
MRP:$230.95 SAVE 23%
 2 in stock $178.93
Cat: 588826 Rel: 02 Oct 15
 
Delay synthesiser module - 4HP wide
Notes: DPLR is a delay module with two interactive delay lines, each with 750mS of delay time.

One input is split to two delays which share overall delay time (DELAY) and regeneration (REGEN). Side B has control over its delay offset (SPREAD) from side A.

Delay, Spread and Regen are all voltage controllable. Regen at max will echo indefinitely, and can create interesting noise swashes.

The pushbutton at the top taps through seven different crosstalk configurations (Regen isolated through ping-pong). Push and hold to change through four different Regen Filter settings from very bright to dark.
Read more
MRP:$212.23 SAVE 29%
 2 in stock $150.84
WMD/SSF ADSRVCA Module (synth module)
Cat: 588820 Rel: 02 Oct 15
 
Multi-mode envelope generator with an integrated Voltage Controlled Amplifier(VCA) synthesiser module - 6HP wide
Notes: ADSRVCA is a multi-mode envelope generator with an integrated Voltage Controlled Amplifier(VCA).

This envelope generator is capable of producing a classic, gate driven Attack/Decay/Sustain/Release (ADSR) envelope as well as a self sustaining, looping Attack Decay (AD) and Attack Decay Release (ADR) one shot envelopes.

The integrated VCA eliminates the need for an external VCA module and can be used independently when an external control voltage is utilized.

The envelope controls the shape of the VCA’s amplitude response by default.

Power Draw: +36mA, -16mA. 6HP width. 25mm Depth.
Read more
MRP:$199.74 SAVE 25%
 1 in stock $149.81
Cat: 742232 Rel: 16 Dec 19
 
4HP voltage expander module for the METRON trigger & gate sequencer
Notes: Expander for WMD's Metron, a 16-channel trigger and gate sequencer module. Adds four tracks of voltage sequencing per module, turning the Metron into an even more powerful sequencer

Supplier notes:
Voltera is a voltage expander module for the METRON trigger and gate sequencer and adds 4 bipolar voltage tracks in 4hp. Up to 16 Volteras can be added to a single METRON giving you up to 64 CV Sequencing lanes for your Eurorack modular system!

With independent voltage ranges and quantize settings per track, Voltera allows for real time control over 4 different parameters at once, allowing you to dial that track to the parameter you are sequencing.

Sequence melodies, modulate parameters, and more with ease by adding Voltera to your METRON set up.
Read more
MRP:$230.95 SAVE 24%
 7 in stock $174.76
Cat: 760485 Rel: 06 Jan 20
 
Polyphonic CV source expander for WMD Arpitecht
Notes: A companion module to the Arpitecht,Triad sends out three static voltages to be used with three oscillators in order to create chords underneath your Arpeggios. Triad connects to the back of the Arpitecht via included ribbon cable and will adhere to the scale and transpose information set by it's master.

Triad knob and CV input set different combinations so your chord can be completely unique, while still in key with your arpeggio. Inversion switch and CV input allow you to select three different chord voicings easily.

Controls:

- Triad Knob: Selects the 3-note combination sent via CV. Becomes an offset with CV.
- Inversion Switch: Selects which inversion of the chord the Triad will play. Set at 0 for use with CV as it will "take over".

Jacks:

- Note 1,2,3: CV outputs for use with 1V/Oct inputs on 3 oscillators
- New: This output sends a trigger each time a new chord is made/selected
- Inv: CV input for the inversion selection. Accepts 0V to +5V
- Thresholds for 1st and 2nd inversions are 1.25V and 2.5V respectively
- Triad: CV input for Triad selection. Accepts 0V to +5V.

Other:

- Size: 4HP
- Connector: 20 pin ribbon cable
Read more
MRP:$118.60 SAVE 26%
 4 in stock $87.39
Cat: 771732 Rel: 20 Apr 20
 
slew module
Notes: Compact dual slew module adds slide/glide to sequences in a compact format. Includes some nice added features allowing it to work as an envelope or envelope follower.

Supplier notes:
The acid style pitch slew effect has made it to Eurorack in a small easy to use package. You no longer need to dedicate more complicated modules patched in wacky ways to achieve this classic sound. Finally, a dual slew, with the right interface, at the perfect size. Add some slide and smoothness to your patches on your own accord with Time Warp.

TIME WARP is a dual channel, gated slew module with some extra features that make a powerful and versatile addition to any Eurorack Modular Synthesizer System.

Its unique, Gated Slew function allows users to add slew to any voltage signal at designated times by sending it a gate signal from a sequencer or similar source. Switch it up with Invert Logic on the gate input, or use the switch as a real time performance tool for hands-on control over when the slew will take place.
With two modes of symmetry and a full wave rectifier on the input, Time Warp can function as 2 independent Slews, two A/R Envelopes with tied controls, or even as an envelope follower, taking audio and turning it into a useful envelope signal. CV control over the Rate of slew! Time warp puts all of that in a compact, 4hp package.

Size: 4hp (20.32mm)
Depth: 30mm(with cables)
Power: 50mA +12V, 50mA -12V

Gate Inputs:
100k ohm impedance
2V threshold Schmitt Trigger
Patching into the Gate input disables the Full Wave Rectifier

CV Outputs:
470 ohm impedance, zero-impedance compensating buffer
1V/Octave no drop
22Vpp range
Gain error: 0.1% maximum. 0.025% typical.
Offset error: 1.5mV maximum. 0.5mV typical.

Regulatory:
RoHS, CE, & WEEE Compliant
Made with Lead Free solder and processes
Read more
MRP:$198.50 SAVE 17%
 5 in stock $164.36
Click for better price!
or call +44 20 7424 1960
quote 771732
Cat: 580285 Rel: 03 Aug 15
 
4 input / 4 output routing synth module - 16HP wide
Notes: Introducing the WMD Sequential Switch Matrix: Our take on an essential module.

Four inputs can be routed with individual buttons to four outputs. Those routing settings are stored in an array of matrices that can be sequenced or controlled with CV. Preset routing, feedback loops, chop sequences, trigger blasts (with expander), four-bit-wavetable-synthesis, and dramatic controllable mayhem are all possible.

The Sequential Switch Matrix (SSM) is a four input, four output signal routing system. The digitally controlled analog signal paths allow for a variety of routing control options. The open architecture allows for many uses beyond simple signal routing and unity mixing.

The Sequential Switch Matrix (SSM) is a four input, four output signal routing system. The digitally controlled analog signal paths allow for a variety of routing control options. The open architecture allows for many uses beyond simple signal routing and unity mixing.

The signal path uses 0.1% resistors and will pass precision pitch or other CV signals with minimal gain and offset errors.
Inputs 1 - 4: These inputs accept bipolar +-10V signals before clipping. Signal level will illuminate the adjacent LED; green for positive voltages, red for negative.

Outputs 1 - 4: These outputs (along the bottom) contain the signals from the inputs (summed together) if the routing LED is lit.

Comparator: The Compare In input voltage is compared to each output voltage. If the output is higher than the Compare In voltage, the Comp output will be high (10V gate) for that channel. The blue LED will also be illuminated.

DAC 1:2 Out: This output is generated from the status of the first two columns. It is a weighted Digital to Analog conversion. 1-1 is the most significant bit, carrying a weight of 2.5 volts. 2-1 is exactly half that weight (1.25V). 4-2 is the least significant bit (0.020V). The two columns provide an 8 bit voltage output that is always present.
Read more
MRP:$380.76 SAVE 26%
 3 in stock $280.89
Cat: 580286 Rel: 29 Jul 15
 
Synth module unit for extended functionality of the SSM module
Notes: The SSM Expand 8 HP module provides extended functionality of the SSM.

Gate/Trig: Gate (Green LED lit) provides 10V outputs for each routing button. It mirrors the routing shown by the SSM LEDs. Trig mode (Red LED lit) will output a trigger when a step (CV, Step/Gate or Reset) is taken. Pushing a routing button will not change the output thus providing synchronized triggers.

Trigger Length: CV and knob provide adjustable trigger length.

Retrig on Step: When on, gates and triggers will retrigger quickly when a step is taken.

Invert Behavior: When on, routings that are OFF will produce ON triggers or Gates.

DAC3/4: Two 4 bit DAC outputs that output a weighted 4 bit voltage between 0 and 5 volts. From routing columns 3 and 4.

Step: Outputs a trigger for each step, reset or CV change that is made to the SSM.

Installation: Connect the 20 pin ribbon cable to the GTExp header on the SSM, and the ToSSM connector on the Expand. Red Stripe Down.

Specs: 8 HP. 25mm Depth. 10V Gate Outputs. Current consumption is +40mA, -3mA. 12 month warranty.
Read more
MRP:$173.53 SAVE 29%
 2 in stock $122.76
Cat: 765963 Rel: 24 Feb 20
 
three-channel switch module
Notes: SL3KT (pronounced "Select") is a simple three-channel switch module for Eurorack Modular Synthesizers.
Three independent, two-way switches allow for users two select between different sources or destinations of both CV and Audio Signals. Useful for many tasks in a Eurorack system such as sequence selecting, CV selecting, boolean logic operations, group switching, group routing, gating, waveform mixing, and so much more!
Read more
MRP:$161.04 SAVE 20%
 2 in stock $129.00
Click for better price!
or call +44 20 7424 1960
quote 765963
FORTHCOMING
WMD SCLPL Stereo 5-Band Digital EQ & Morphing Filter Module
Cat: 776823 Rel: 31 Aug 20
 
filter module
Notes: SCLPL (pronounced SCALPEL) is a Stereo 5-Band Digital EQ / Morphing Filter module for eurorack modular synthesizers. Use it to cut out problem frequencies on voices in your mix or to add pleasing enhancements to your stereo field.

Dual Mono and Stereo Control Schemes make it an excellent addition to any WMD Performance Mixer Setup. Add 4 SCLPL for 8 channels of EQ in 16HP. Put a 5th on the Master Bus and you have the ultimate eurorack mixing setup!

A simple user interface makes it a powerful tool for many use cases. It features 9 user-programmable preset slots that can then be "morphed" between seamlessly with CV or the Level knob in Morph Mode.

Each frequency band is set independently with the Level, Q, and Frequency knobs, and a helpful LED display aids in knowing exactly what's going on at all times.

Frequency bands include a Low Shelf, 3 Mid-Range Peaking Bands, and a High Shelf.
Read more
coming soon $246.55
Cat: 665765 Rel: 14 Nov 17
 
Eight-channel mixer module designed especially for live performances & jam sessions - 40HP
Notes: A game changing mixer for live performance within the Eurorack modular synth ecosystem.

The Performance Mixer is an 8 channel audio mixer designed specifically for live performance and jam sessions within the modular ecosystem. With 12 audio inputs for the first 6 channels, and 2 true stereo channels, there is plenty of room for all your modular signals and more.

2 mono auxiliary sends with dual mono returns, stereo send and return, and another set of stereo mix inputs give you the routing you need to send signals to interesting effects as well as utility uses such as bus compression and master equalizers.

Tired of not being able to tune oscillators and program sequencers on the fly? Not to worry, the performance mixer also includes a cue mix section so you can monitor your incoming signals in headphones before sending them to the front of house mix. Just like on a traditional DJ mixer, the cue mix knob determines how much of the cue vs the FOH mix you hear in the phones.

Two headphone outputs for convenience and teamwork. Collaborate with friends without wasting any channels by sending the stereo output of their mixer into the unity gain mix input. Monitor with the dual headphone outputs and you can both hear the entire mix.
Read more
MRP:$867.64 SAVE 29%
 2 in stock $611.70
Cat: 640977 Rel: 30 May 17
 
Stereo filter module in 6HP with high pass & low pass circuits
Notes: The WMD Overseer is a stereo filter inspired by those commonly found on DJ mixers and DJ software. It features two filters on one knob, stereo ins and outs, bypass switch, and a fun stereo "Tilt" function which offsets the filter cut-off frequency across the stereo field creating some dizzying stereo effects.

Controls:

- Bypass Switch: Turns the filter on and off. LED will be red when the filter is engaged. Toggles on button release.
- Filter Cut-off Knob (the big one): Turn Left for Low-Pass filtering and Right for High-Pass filtering. No filtering in the middle. Becomes offset with CV.
- Filter Cut-off Switch: Switched to the left limits both filters to audible frequencies so you cannot accidentally filter out all signal. Switched to the right disables the limit allowing you to filter the signal into oblivion.
- Resonance knob: Controls the amount of frequency boost at the cut-off point. Will not self-oscillate. Knob becomes offset with CV.
- Tilt Knob: In the middle applies no tilt. Rotate left or right to off set the offset to the filter cut-off on each side. Knob becomes offset with CV.
- Tilt Switch: Allows you to apply the Tilt function to either or both HP and LP. Left for LP, right for HP, centre for both.
- HP - LP Knobs: Attenuverters for incoming CV over the filters.
- HP - LP Switch: Switch to the right sends 5V to the HP - LP knobs and turns them into independent controls for the cut-off frequency of both filters, allowing you to control both filters at the same time with these independent knobs.

Jacks:

- HP: CV input for the High-Pass filter
- LP: CV input for the Low-Pass Filter
- Tilt: CV input for the Stereo Tilt function
- Res: CV input for the Resonance of both filters
- Master: CV Input over both filters, accepts -5V to +5V

Other:

- Input Impedance: 40k
- Output Impedance: 220 ohms
- Frequency Response: 20Hz to 20kHz +-1dB
- LPF Cut-off Range (-3dB Fc)
- Limited LPF: 22Hz to 32kHz
- Unlimited LPF: 1Hz to 32kHz
- HPF Cut-off Range (-3dB Fc)
- Limited HPF: 3Hz to 12kHz
- Unlimited HPF: 3Hz to 38kHz
- Signal Path: AC Coupled at all times
Read more
MRP:$312.10 SAVE 27%
 3 in stock $226.80
Cat: 640972 Rel: 27 Feb 17
 
Stereo compressor in 4 HP
Notes: MSCL is a stereo compressor in 4 HP designed for your master bus to help "glue" your mix together. Inspired by the DBX "Over Easy" style compressor, it features independent attack and release knobs, output gain, and an all-in-one knob function for compression which decreases threshold, increases gain and ratio all with one turn. Limit Switch allows the MSCL to act more like a peak limiter. The threshold switch lets you compress signals of different amplitudes. It also features a side chain input for classic ducking sounds on stereo tracks.

Controls:

- Comp knob: Adjusts makeup gain, threshold, ratio simultaneously
- Attack Knob: Controls how fast the compressor will react to incoming transients
- Release Knob: Controls the speed in which the compressor will release
- Gain Knob: Adds up to +-35dB on the output
- Threshold Switch: Changes the threshold range
- Limit Switch: Limits the comp knob's makeup gain. Makes the MSCL operate more as a peak limiter

Other:

- Size: 4HP
- Input Impedance: 20k
- Side Chain Impedance 100k
- Output Impedance: 220 ohms
- RMS and Adaptive Detector Response
- Green/Red indicator for Gain/Reduction
- AC Coupled signal pass
- DC coupled bypass
- AC coupled Sidechain
Read more
MRP:$293.37 SAVE 21%
 2 in stock $231.99
Cat: 709199 Rel: 08 Mar 19
 
36HP Eurorack module featuring 16 channels of trigger & gate signals
Notes: WMD Metron is an advanced trigger and gate sequencer. It features 16 channels with up to 256 steps per pattern, which you can save to an SD card. Thanks to a random pattern generation function, you will never run out of ideas! Furthermore it offers a probability-function per step which will bring your patterns to life. If you have rhythm flowing through your veins, use the recording function and just tap in patterns with the corresponding buttons. With beat repeat, ratcheting and a fill function, it is meant to be a performance sequencer but makes just as much sense in the studio. Metron: so much sequencing power in 36 HP!
Read more
MRP:$749.04 SAVE 22%
 2 in stock $586.75
Click for better price!
or call +44 20 7424 1960
quote 709199
Cat: 580271 Rel: 03 Aug 15
 
Invert offset synth module for modifying control voltages for other modules
Notes: The 6 HP Invert Offset module creates an easy way to modify control voltages for other modules in your system.

The Invert Offset consists of two identical channels. Signal applied to the In jack is vertically offset by the knob, additionally a CV signal may be applied to offset the signal vertically.

The +Out jack puts out a non-inverted signal with the specified offset. The -Out jack puts out an inverted signal with the same offset as the +Out.

The Offset CV input allows you to mix two signals together, Offset will never be inverted, while the signal at the In jack will be inverted based on the selected output.

There is also a sum output (1+2) that takes the non-inverted outputs and adds them together. Also there is a comparator gate output that is on if the channel 1 output is more positive than channel 2.
Read more
MRP:$106.11 SAVE 32%
 1 in stock $71.78
Cat: 696393 Rel: 06 Aug 18
 
Dual channel digitally controlled VCA - 4HP
Notes: The DVCA is a redux of the classic WMD Digital VCA module, giving it more features while reducing its size and power consumption.

Channel A is now unipolar/bipolar switchable, allowing for use as a bipolar VCA.

With control parameters for bias and CV, users can create classic ring modulation and attenuversion effects. Channel B still has the character and features of the Digital VCA.
Read more
MRP:$230.95 SAVE 20%
 2 in stock $185.18
Click for better price!
or call +44 20 7424 1960
quote 696393
Cat: 728569 Rel: 20 May 19
 
synth module with professional trigger input and audio input
Notes: Feel the sizzle as you harness the energy of liquid metal. Forge your sonic desires, and rain hot fire onto the eardrums of your listeners. Cymbals, gongs, bells, and sheet metal are the territory of Crucible.

Have you ever wanted to start with the smallest cowbell, and then CV it until it becomes a gong larger than the room you're standing in? Crucible makes this possible.

By utilizing classic digital synthesis blocks like delay and digital filters, Crucible can fully synthesize, in real time, sounds similar to thin struck pieces of metal.

We expose the engine to the user through parameters specifically chosen for their sonic resemblance to the "parameters" of a real drum kit cymbal.

Size, Pitch, Tone, and Deform give the user the tools to shape their cymbal. The Excite knob allow the user to shape their exciter, completely changing Crucible's response. Finally, select where the exciter contacts the engine by triggering the EDGE and MID inputs, or trigger both to strike the "bell."

All of this adds up to a module that is lively and energetic, completely mimicking the feeling of playing a real cymbal, while still incorporating WMD's "New Sounds, Maximum Experience" philosophy.

- Realistic sound!

- Positional trigger input. Hit the edge, middle, or bell.

- 3 Model Types: Cymbal, Cracked Cymbal, and Curved Plate

- Audio input for experimental effects.

- Separate Pitch and Size controls for maximum realism.

- Choke input for perfectly timed catches.

- Proprietary Synthesis model using digital filter and delay networks. No samples!
Read more
MRP:$312.10 SAVE 27%
! low stock $226.78
Cat: 759362 Rel: 30 Dec 19
 
Eurorack bass drum module - 8HP
Notes: Best of both worlds, Crater is an analogue/digital hybrid bass drum that plays as hard as it kicks.

The analogue side is where crater gets its tone and its power.

Like a 909 style kick drum, Crater's analogue section features a pitch envelope that ranges from snappy attacks, to laser sounds, to disco toms. 1 volt per octave tracking and an amplitude envelope that allows users to use Crater for classic 808 style hip hop bass lines as well as rolling techno kicks. Speaking of rolling bass, Crater has a new feature we have yet to see on a dedicated kick drum module, which is the Sustain stage. The sustain knob lets you dial in a sustain level that Crater will stay at as long as the gate is high. Inspired by using samplers in "gate mode", the sustain circuit lets you use gate length to sequence different kick lengths, while keeping your decay setting constant. This is perfect for getting multiple sounds from of one module.

The Digital side is where we feel Crater really becomes unique and ultra-useful in a live performance Eurorack system.

The "secret sauce" of kick drums is usually found in layering different sounds to create a drum that cuts through the mix in the high frequencies, while remaining powerful in the lows. Many kicks you hear in dance music tracks are samples made from layering two or more sounds and we wanted to achieve this level of polished sound with our kick. So, what we did was add in a digital section for the Attack side of the kick drum. The Timbre knob lets you dial in different attack sounds we've created, inspired by classic drum machines, music we like, and sample packs we've used in the past. The "Body" knob shapes the attack while adding a bit of delayed noise which simulates things in the room being affected by the kick such as loose lugs or a snare drum rattling nearby. This gives the kick more of a natural and acoustic feel to the sound.
Read more
MRP:$349.55 SAVE 23%
 4 in stock $268.41
Click for better price!
or call +44 20 7424 1960
quote 759362
Cat: 664480 Rel: 11 Oct 17
 
Percussion module using granular synthesis - 8HP
Notes: The Chimera, pronounced "kai-meer-ah", is WMD's first percussion synthesizer module for Eurorack.

First, they recorded samples of different metallic hits to create the sonic signatures that they call Surfaces. The sources include tambourines, sleigh bells, drill bits, wrenches, shell casings, coins, chains and stomp box enclosures.

Second, they built a proprietary granular synthesis engine around the sonic signatures with the goal of making a module that could sound like a human hitting and shaking a tambourine. With the fundamentals finished, they tweaked the control ranges, built the post-engine effects, and bomb-proofed the hardware.

From there they pushed and polished the engine and user experience, squeezing every juicy drop out of 8HP.

Humanistic shakers, drum machine tambourines, laser guns, minimal techno offbeats, giant-robot movie sound design, etc. It's all yours with the Chimera.
Read more
MRP:$312.10 SAVE 27%
 1 in stock $226.78
Cat: 580265 Rel: 03 Aug 15
 
3 channel buffered multiple module
Notes: WMD's next utility module is a three channel buffered multiple. Each channel has a dual color LED indicating Green for a positive voltage, and Red for a negative voltage.

Each channel is normaled to the next channel for a total of nine outputs from one input.
Read more
MRP:$131.08 SAVE 30%
 5 in stock $91.55
Cat: 737960 Rel: 21 Aug 19
 
All-analogue dual stereo crossfader - 6HP
Notes: Stereo patching is becoming more common each day in the Eurorack Modular Synth System and we here at the shop are performing out a ton. Over the past couple years we consistently felt the need for a simple crossfader module that would allow users to switch between two stereo sources, add a stereo effect path, or easily mix a mono source with a stereo one. AXYS was born from this need.

Each crossfader features stereo inputs with normalling for mono to stereo uses as well as independent CV control. Control both crossfaders with one CV easily and decide how the Y will react to X's CV.

Easily transition between two performers similar to a DJ transitioning between decks with one channel and add some master buss effects with the other. Use one channel for adding stereo effects and the other to dial up some nice parallel compression. Perfect for live performance and momentary effect blasts. A simple easy to use module with tons of uses.

All analogue signal path keeps your tone intact and sounding the way you intended it to.
Read more
MRP:$268.41 SAVE 23%
 1 in stock $205.99
Click for better price!
or call +44 20 7424 1960
quote 737960
Cat: 771731 Rel: 20 Apr 20
 
expander module
Notes: AXXENT is an expander module for the METRON trigger and gate sequencer and adds 16 "accent" gate outputs. Each track is specifically tied to METRON tracks, making it a very intuitive addition to any METRON sequencing ecosystem.

Use AXXENT to send signals to additional envelopes, slews, drum accents, and other gate triggered functions.

METRON will need its Firmware updated to support AXXENT.

Dimensions:
Width: 4HP (20.32mm)
Height: Eurorack 3U (128.5mm Panel, 112mm PCB behind panel)
Depth Including Cables: 43mm

Do not connect power to expansion headers.
Read more
MRP:$235.95 SAVE 26%
 1 in stock $174.76
Cat: 760486 Rel: 06 Jan 20
 
Rhythmic arpeggio generator & quantizer module - 12HP
Notes: Simply put, Arpitecht is a voltage controlled Quantizer and rhythmic arpeggio generator. As one of WMD's most musical modules to date, Arpitecht is designed to be an inspiring tool for the modular musician.

With the Arpitecht, you can create intricate melodies span 8 octaves, imply chord changes, instant acid basslines, evolving generative sequences, and, using the Triad expander, polyphonic chord generation.

The Arpitecht features 16 scales, each with a unique set of "note masks" offering hundreds of note combinations with the ability to dial in via knobs on the front panel or CV. 32 rhythm patterns and 32 slide patterns all with CV control let you feed a static clock into it and get unique, evolving patterns of gates and note changes.
Read more
MRP:$348.30 SAVE 17%
 3 in stock $290.25
Click for better price!
or call +44 20 7424 1960
quote 760486
Cat: 606407 Rel: 30 Mar 16
 
Variable-width bandpass filter synth module with 8-pole filter core
Notes: The Aperture is a variable-width bandpass filter with fast and tactile controls. It is capable of simple filtering, self oscillation FM timbres, nasty acidic squelches, and capturing images of UFOs descending from the heavens on a cold winter's night. The concept is a bandpass that ranges from transparent to gnarly, with precision controls that behave under stress, all while being joyful to wreak havoc with.
Read more
MRP:$410.72 SAVE 38%
 1 in stock $255.92
Click for better price!
or call +44 20 7424 1960
quote 606407
Cat: 777841 Rel: 04 Jun 20
 
attenuator & generator module
Notes: Simple but effective four-channel module, allowing you to attenuate or offset CV or audio signals. Normalled 5V source on each channel allows you to generate a standalone CV signal without an input.

Supplier notes:
4TTEN (pronounced either ATTEN or FOUR-TEN) is a four channel attenuator and offset generator.
Use 4TTEN to attenuate any CV or audio signal by running through the ins and outs.
A +5V voltage source is normalled to each input, making it a standalone offset when there is no cable patched into an input.
Each channel is completely independent.
Ever-so-useful in live performance, we designed this module with 4 sliders for easy maneuverability, visual feedback, and enjoyable to play interface. Make your eurorack modular synthesizer system more playable with 4TTEN!
*** 4TTEN's PCB is 113mm (4.45") tall and may be a tight fit in some cases ***
Highlights
- 4 independent attenuators for Control Voltage and Audio signals
- Performance friendly sliders
- Can be used as 0 to +5V Offset
- Comfortable fader caps from the Performance Mixer
- Only 4 hp!
SPECS:
Size: 4hp
Depth: 30mm(with cables)
Power: +5mA , -5mA
Virtually no drop on 1V/Oct signals.
VERTICAL PCB LENGTH: 113mm (4.45")
IMPEDANCE = (SOURCE + 100ohm ) / 100kohm
UNBUFFERED
Read more
MRP:$118.60 SAVE 23%
 2 in stock $91.55
Click for better price!
or call +44 20 7424 1960
quote 777841
Cat: 695384 Rel: 06 Jul 18
 
Analog 12db/octave multimode filter with distortion - 18HP
Notes: VCF1 brings sound and functions of our popular Rocket and 2-Pole to your Eurorack. Besides being a filter, VCF1 boosts an experimental distortion stage to add harmonic distortion to the signal. Watch out - it can get brutal!

The efficiently designed user interface allows direct access to all important sound parameters. Equipped with real metal knobs the parameter range of the pots are made for perfect musical results.

VCF1 allows you to side-chain an additional audio signal, and the organic filter resonance can be used for extreme self-oscillating effects.
Read more
 3 in stock $174.76
Click for better price!
or call +44 20 7424 1960
quote 695384
Cat: 561577 Rel: 15 Sep 15
 
Wavetable module with 21st century advanced wavetable engine with classic Waldorf wavetables included - 32HP
Notes: nw1 is our debut product for the popular Eurorack format. It includes an advanced wavetable engine with independent control of spectral envelope and noisiness - just like Nave.

Wavetable scanning is cyclic with optional modulation of travel speed, position, spectrum, and more besides. By providing the worshipped Waldorf wavetable set from the classic Microwave and Wave synthesizers, nw1 will enrich your Eurorack modular system as a potently powerful sound source. The nw1 sound engine also allows for onboard creation of user wavetables via time domain multiple foldover analysis. All you need to do is connect any sound source to the nw1 to transfer audio into a wavetable. Or use the integrated speech synthesizer to translate typed text into wavetables.

Wavetable synthesis is an extremely powerful sound source suited to producing all kinds of vivid metallic hues and digital clangorous tones. It can create organic, bell-like timbres, as well as spectacular-sounding scans through various waveforms with truly ear-opening results. It was almost impossible to create these kinds of sharp-edged, digital sounds back before the invention of wavetable synthesis in the late-Seventies.

Starting with the wavetable synthesizers of those days, a whole new sound palette left its imprint on so many hit records. Today, with Waldorf's neatly-sized nw1 Wavetable Module, this sound is readily available for the popular Eurorack standard - sounding just as pure, sharp, and massively destructive as it did back in the golden days of digital!
Read more
 More than 10 in stock $164.36
Click for better price!
or call +44 20 7424 1960
quote 561577
Cat: 599599 Rel: 19 Dec 16
 
Compressor synth module with flexible side-chaining & RMS/peak modes
Notes: A true high-end analogue compressor not only adds punch to your signal, but it also can be modulated in intriguing and unconventional ways!

Side-chaining with an adjustable balance control will open a huge set of modular possibilities.

The CMP1 has all the features you expect from a modern compressor including attack and release control, automatic and manual modes, hard and soft knee as well as output gain and bleed amount of the original signal.
Read more
 3 in stock $168.52
Click for better price!
or call +44 20 7424 1960
quote 599599
Cat: 662842 Rel: 18 Sep 17
 
Dual filter module with flexible routing & excellent audio properties - 24HP
Notes: There is almost no modular system without at least one filter-module. You can look at them as the stars within the giant Eurorack-jungle. twinVCFilter is such a star as well. A dual filter module with flexible routing and excellent audio properties. It covers a huge range of different applications without the slightest effort.

Features and Routing:

Each filter section of twinVCFilter works as low- or highpass-filter with a slope of 12 dB/octave or as bandpass-filter with 6 db/octave. Signals can be directed in three ways through the module:

- Serial: The incoming signal passes both filter sections in a row.
- Dual: The filter sections act completely separated of each other. As if they were two individual filter modules.
- Parallel: The incoming signal passes both filters at the same time.

With these routings you can i.e. generate bandpasses or notches with variable slopes and different resonance settings or doubling the filter's slope. These are the more obvious combinations but there is a lot more to discover.

The convenient link-feature allows to couple cutoff- and resonance of both filter sections for straightforward stereo use in dual mode.

Mix section:

The flexible signal-routing is supplemented by the mix-section. Here you can crossfade both filter sections manually or by control voltages. Seamless movements from low- to highpass-filter, is as easy as crossfading from half to doubled slope. Of course you can mix two completely individual signals or toggle between them by using a rectangle-LFO-modulation.

Resonance:

Resonance is a key factor in the context of sound-shaping and sound-generation using a filter. Therefore we carefully trimmed twinVCFilter's resonance to be as musically and stable as possible. You can apply subtle frequency-dependent emphasis to signals and tear them up to self-oscillation. The latter generates a solid sine-wave which is an excellent base for percussive sounds. Possible cross-modulations significantly enhance the sound-generator features. By the way: If you are missing a vibrato-LFO in a patch, twinVCFilter can do the job.

twinVCFilter offers a huge set of features to form impressive soundscapes. It can take subtle influence to signals or massively truncate frequencies. It leaves nothing to be desired. Despite, for those who need additional possibilities we especially designed the tVCF-Extension module.
Read more
 1 in stock $300.65
Click for better price!
or call +44 20 7424 1960
quote 662842
Cat: 553428 Rel: 30 Jun 16
 
Transformer isolatoed audio interface synth module
Notes: The TAI-4 not only makes it easy to get balanced signals out of or into a modular system, it also does that job with superior audio quality. Above, it galvanically separates the inputs from the outputs by using a total of four high-end audio transformers and thus prevents unwanted noise interferences.

We decided to uses switches instead of potentiometers for adjusting the gain levels. This ensures accurate and equal leveling of stereo signals.

The TAI-4 is an extremely useful module when it comes to integrate external studio processors, or the opposite, connecting the modular system to outboard equipment or DAWs.
Read more
 1 in stock $258.01
Click for better price!
or call +44 20 7424 1960
quote 553428
Cat: 745109 Rel: 06 Sep 19
 
Compact yet flexible mix module - 6HP
Notes: Even with small patches with only a few modules, you usually have to combine individual signals into a single sum: You need one mixer, maybe two, and preferably as small as possible.

With Sum 42, Vermona present a compact yet versatile Eurorack mixer. You can use it as two 4-in-1 or one 8-in-1 mixers. It can process both audio signals and control voltages.

Sum 42 is an indispensable tool with a perfect size/benefit ratio.
Read more
 1 in stock $108.20
Click for better price!
or call +44 20 7424 1960
quote 745109
Cat: 677526 Rel: 13 Feb 18
 
Random-based trigger sequencer - 24 HP
Notes: RandomRHYTHM is a random-based dual-channel trigger sequencer with a very unique concept. What you cannot do with it is manually setting steps or tapping-in a rhythm. Instead you have four sliders per rhythm-section to set the probability for the appearance of quarters, eighths, sixteenths and triplets to form sequences.

Realtime or Dice:

Each of the rhythm-section can work in realtime or dice mode.

Realtime means, that the module is continuously generating new random values for each note value whereas in dice-mode it generates them for a complete 3/4- or 4/4-bar. In both modes, even if a bar has been diced, the sliders still influence the resulting sequence.

Clock central and multiple outputs:

Beside the sequence output of each rhythm-section there are individual outs for the quarters, eighths, sixteenths and triplets. You can use them with or without random. The latter makes RandomRHYTHM a precise tool to generate or multiply clocks.

Apropos clocks, the module can create its own or work with external clocks (per rhythm-section if you like).

Additional fun is guaranteed by the flexible RESET input that lets you mute the outputs or restart your diced bar. As with all parameters, the functionality can be set individually per rhythm-section.

Endless creativeness:

RandomRHYTHM is a creativeness booster. It is easy to create complex rhythms or straight four-to-the-floor beats. Its fool proof user interface lets you play it without thinking about randomness and probabilities, although that's the fundamental concept of the module. You don't need to be a stochastic genius!

It doesn't matter if you use it as sole rhythm-base or as valuable addition to other sequencers. RandomRHYTHM gives you a different view to rhythms and the way to generate them.
Read more
 1 in stock $263.20
Click for better price!
or call +44 20 7424 1960
quote 677526
Cat: 662852 Rel: 18 Sep 17
 
Four-channel voltage controlled polarizer featuring four identical attenuators - 10HP
Notes: You never can have enough modules that influence levels - be it for audio signals or control voltages.

quadroPOL is a four-channel polarizer module. It can attenuate any incoming signal, in-phase or out of phase. One of its most special features is the way each channel's level control works. Instead of having one dedicated zero-point, it has a "dead zone" where the input signal will be completely suppressed. Thus, you will easily find the off-position, even without a centre-click, while, at the same time you'll be able to create extremely sensitive level increases.

Further outstanding features are:

- A channel's output signal will optionally be forwarded to the next one, which allows the use of quadroPOL as a mixer-module. This way you can sum up to four signals.
- The module can be controlled via control voltages. Beside manually setting the level you can use each channel as VCA. You never can have enough VCAs in a modular system, can you?
- quadroPOL's circuits work with a four-quadrant-multiplier. This means the module is a ringmodulator without compromises - sorry - four ringmodulators.

Do you have 10 HP unused rack-space left in your Eurorack-system? You should consider getting a quadroPOL module. It is so versatile that it's hard to live without one, once you've gotten your hands on one of it.
Read more
 1 in stock $222.63
Click for better price!
or call +44 20 7424 1960
quote 662852
Cat: 617815 Rel: 30 Jun 16
 
Quad MIDI interface synth module
Notes: Format conversion the flexible way:
Our quad MIDI Interface picks up the flexible voice assignment of VERMONA's PERfourMER MKII to provide a fourfold MIDI-to-CV/Gate converter for Eurorack-compatible modular systems. This way, you can play your modular synthesizer in different monophonic modes or even polyphonically using MIDI.

More than just pitch:
Each of the four "output channels" offers a CV-output with 1V/octave-characteristic, a gate-output plus two additional control voltage outputs. These can be easily addressed by MIDI-controllers such as the modulation-wheel or pitch bender. The output channels can freely be combined or be used with independent MIDI-channels. Combined output channels can be used in unison, monophonically with rotating voice assignment or even to create polyphony. qMI 2 also offers four clock-divider-outputs. These convert incoming MIDI-clock signals into analogue gate-voltages. A reset-output allows sequencers with corresponding input to run in sync by MIDI-start/stop commands. A new feature of qMI 2 is the option to switch between both monophonic voice assignment modes using a gate signal.

Easy access to functionality:
An important part of the modular concept is the easy access to every parameter, without using displays or complicated menu structures. qMI 2 will help you to integrate your modular-system into your MIDI-setup straight-forwardly!
Read more
 1 in stock $267.37
Click for better price!
or call +44 20 7424 1960
quote 617815
Artikel 1 bis 50 von 997 auf Seite 1 von 20 anzeigen
1  2  3  ...  20  »

Filter

Synth modules
DJ-Ausrüstung
Release Date
Close