100% Sicheres Einkaufen

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Sicheres Einkaufen

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Synth modules

View:
Options
Artikel 1 bis 50 von 120 auf Seite 1 von 3 anzeigen
1  2  3  »
Subscribe to our weekly Studio Equipment emails
Cat: 634778 Rel: 06 Feb 17
 
Digital processor with high precision analog CV circuitry
Notes: QuantiZer is a creative melody composing module that uses cutting edge analog electronics and DSP to tune analog VCOs precisely into Western musical scales. The front panel is packed with functions that makes it very playable and intuitive to use, with a layout that moves forward from the typical quantizer design. At its centre is a slider that can be set to play notes, add Portamento to an incoming sequence, transpose a sequence with in an octave range or transpose a sequence within 5 octave range. The 12 note keyboard can be set to play notes manually, add and subtract notes from scales, transpose a sequence as well as setup a variety of settings that define the quantizer behaviour and sync with other modules.

Major and Minor keys are both built in to let you switch scales in a very playable way, making it pretty easy to explore musical progression. There are also 24 user scales ready to be filled up with your own custom scales. A built in sketch pad records and plays back keys entered manually on the keyboard and slider in sync with external clock and reset signal, or Tiptop's SyncBus which chains the QuantiZer recording function to the Circadian Rhythms time line for precise recording and playback. Scale CV in can be set to switch between changing scales or transposing pitches using CV from sequencers. Quantization can be set for free run or Trigger mode for even more interesting ways to interact with external sequencers.

Quantizer sets a new performance standard for Eurorack that offers incredibly stable CV quantization minimizing glitches on input, utilizes high precision temperature compensated 1V/Oct CV generation on output and features stunning conversion latency of less than half a millisecond. QuantiZer can be set to process a wide variety of CV voltage input ranges, +/-5V CV from LFOs, bi-polar envelopes and such, or 0-10V / 0-5V standard CV from sequencers. Continuing the tradition of advanced Tiptop digital modules, the QuantiZer Firmware running the digital brain is upgradeable via a USB thumb drive interface at its back allowing for continuous improvement and fine tuning of function and stability over time.
Read more
 1 in stock $251.63
Cat: 569586 Rel: 30 Jun 15
 
MIDI interface and MIDI event processor Eurorack synth module with 4 CV outputs and 4 trigger/gate outputs - 12HP size
Notes: Yarns is a MIDI interface providing up to 4 channels of CV/Gate conversion, and providing some of the MIDI message processing features of Mutable Instruments' MIDIpal, including arpeggiator, euclidean sequencer, and a SH-101 inspired step sequencer.

Yarns provides 4 CV outputs and 4 Gate/trigger outputs, which can be assigned to up to 4 voices. In single voice mode, note, velocity, modulation and aftertouch (or other CC) CV are produced, along with a gate, a trigger, and a clock/reset output. In two voices mode, two channel of note, modulation or aftertouch CV are produced, along with two gates, and clock/reset outputs. Finally, in four voices mode, four pairs of CV/Gate outputs are provided.

The 2 and 4-voice modes are available both in a "polyphonic" and "multitimbral" flavour. The former receives chords from one single MIDI channel and dispatches them to the voices; while the later provides independent monophonic parts - which can be addressed to different MIDI channels, keyboard ranges, or even velocity levels. Various note priority modes (low, high, last) and polyphonic allocation schemes (voice-stealing, random, cyclic) allows you to fine-tune the CV/Gate conversion to your playing style. Each voice has a built-in digital LFO to interpret modulation wheel messages as a vibrato; can respond to pitch-bend messages; or can be smoothed with a glide/portamento control - no need for a dedicated module and patches to get the right response from a MIDI keyboard!

Each part can generate sequences either through an arpeggiator/euclidean sequencer combo; or with a SH-101 style sequencer with step-by-step recording, storing up to 64 notes. The module can sync to an external MIDI clock, and generate a clock/reset output at any subdivisions of the MIDI clock.

Other unique features include support for microtunings (either through standard MIDI messages or from a selection of historical tunings or indian ragas), just intonation, and an audio output mode which can transform one, two, or four of the CV outputs into simple digital oscillators.
Read more
 3 in stock $256.79
Cat: 557451 Rel: 19 Dec 14
 
Random voltage generator synth module
Notes: The "WoggleBug" is a random voltage generator, originally designed by Grant Richter of Wiard Synthesizers. It is a continuation of the "smooth" and "stepped" fluctuating random voltage sources pioneered by Don Buchla within the Model 265 "Source of Uncertainty," expanding it to include the other-worldly Woggle CVs (stepped voltages with decaying sinusoids edges).

The Wogglebug is a very musical random voltage generator where it is possible to synchronize all random signal to a Master Clock. Guaranteed to unleash your synthesizer's ID MONSTER!
Read more
 1 in stock $225.74
Cat: 563579 Rel: 10 Mar 15
 
Dual slider based ADSR envelope synth module, 14HP wide
Notes: The circuit is based in part on the Roland SH-101 / System100m design with several enhancements.
Read more
 3 in stock $205.02
Cat: 563679 Rel: 10 Mar 15
 
Quad functon/envelope generator synth module with 4 x function generators and 3 modes: "ad (attack - decay), "ahr (attack - hold - release)", & cycle (ad envelope loops)
Notes: Each function can have a linear or exponential curve.

wide time range for attack/decay controls: <0.5ms to well over 30s

All analog and discrete logic for function generation (totally smooth and continous waveforms)

12hp and skiff friendly
Read more
 1 in stock $249.55
Cat: 718062 Rel: 18 Feb 19
 
2-channel quantizer & step sequencer - 8HP
Notes: Scales is an 8hp dual-channel note quantizer and step sequencer. Fundamentally, it takes an input voltage, quantizes it to notes in a user-defined scale, and sends that quantized voltage to an output, where you can use it as a melodic pitch source for oscillators or any other module that expects to see discreet note values at its input.

Scales goes far beyond the fundamental, allowing you unprecedented control of the pitches and intervals hiding inside your control voltages; turn LFO's into arpeggiators; random voltages into harmonic counterpoint; and unquantized external CV sequencers into chromatically tuned note sequencers.

Quantization can be locked to an incoming trigger. There are a number of trigger output options as well, ranging from no triggering (good for pitch shifting drones); through triggers that sync with either of the two outputs (or both); to a trigger or gate transmitted in sync with one sent to the module's TRIG input.

Shift:

Scales features two independent outputs, enabling you to create shifted harmonic intervals within your chosen scale using only a single pitch input. Using the SHIFT input you can modulate changes on OUT A and/or OUT B.

You can also use the shift input to switch between scales or to change the root of any existing scale pattern or split Scales into two quantizers - each conforming to a common scale, but fed entirely different voltage sources.

Sequence:

Scales also features a 128-step SH-101 style step sequencer (complete with storage for up to 35 fully programmable patterns) - allowing you to feed OUT B with sequenced notes and rhythm patterns, while OUT A continues to function as a standard pitch quantizer for external voltages. You can even sync the sequencer to quantizer events on OUT A.
Read more
 2 in stock $267.15
Cat: 718065 Rel: 18 Feb 19
 
4 track gate & trigger sequencer - 8HP
Notes: Steppy is a 4-track programmable gate sequencer with eight internal memory slots, external clocking, numerous tweakable parameters, and a performance-first design aesthetic.

Each track features numerous independent parameters that govern its playback independently of the other tracks. Specifically:

- Each track has its own length, which can range from 1-step to 64-steps, allowing for polyrhythms, fills, or constantly evolving gate interactions between tracks.
- Each track has its own gate length, which ranges from very short to very long, with tied gates possible at the extreme setting.
- Each track has its own clock divider, allowing patterns to play out over completely different periods of time.
- Each track has its own swing setting, which offsets the timing of every other step.
- Each track has its own delay setting, which offsets the timing of every step.
- Each track has its own probability control, which sets the likelihood that each programmed gate will fire when called upon by the pattern.
- Each track can be shifted (or 'rotated') forward or backward by a number of steps. So if you've created a pattern that 'feels' like it has its downbeat on step 3, you can shift that pattern two steps to the left, so that the downbeat sits on step 1.

Tracks can be programmed by entering active steps on the grid or tapped in live as the sequence is moving. Tracks can be selected and modified in real time as the sequence plays. A select button allows you to directly access each track (and each page of 16 steps within that track) directly through Steppy's intuitive multifunction buttons array.

Tracks can be individually muted and unmuted, and a special performance mode (called "Loopy") enables you to touch any two gate steps and instantly create a performance that loops between those steps.

Track patterns can be cleared without clearing its playback parameters, and all track patterns (along with their individual playback and performance parameters) can be saved as a preset to one of eight internal memory slots.
Read more
 2 in stock $221.60
Cat: 643385 Rel: 29 May 18
 
Touch-sensitive control surface for Eurorack - 20HP
Notes: Tetrapad is a versatile, multi-dimensional, touch-sensitive control surface for Eurorack. Each of its four pads use force sensing resistors to respond to both the vertical position of your finger and its pressure. Four push encoders and a shift function give you even more tactile control over your modular system.

Tetrapad operates in numerous modes - each of which configures the module to perform a specific control task. Through these modes, Tetrapad can emulate a bank of faders; a voltage storage device; a finger drumming surface; a chord generator; an 8-key keyboard; four independent LFOs; or an 8-switch panel. The chosen mode determines what type of signal (CV, note, trigger, gate, etc.) is sent from each of Tetrapad's eight independent outputs, while its multitude of multi-coloured LEDs keep you informed of exactly what's happening within each mode.

Tetrapad automatically remembers how you've configured each of its modes and retains these settings when powered off. By default, Tetrapad automatically saves these settings every minute, or whenever you change modes. This makes Tetrapad ideal for live performance, since you know it will always power up with your configurations intact.
Read more
 1 in stock $274.40
Cat: 643391 Rel: 29 May 18
 
Updated version of the Springray module with added parametric EQ
Notes: There are many excellent digital reverbs available these days but there is still nothing quite like the timeless and magical character of a true spring reverb.

For the Intellijel Springray II, each tank has a totally different set of characteristics, with many unexpected surprises when feeding it through a wide variety of sound sources. One of the most interesting results is how a slow attack saw waveform from a Dixie almost sounds like a realistic cello!

Version two of the Springray provides a number of changes and improvements to the original design. The shelving EQs have been replaced with a parametric EQ with frequency, Q, and gain controls. The CV inputs for feedback and mix balance have been replaced with inputs to control the filter frequency and gain. Lastly, the feedback and limiter circuits have been redesigned, and the drive quality has been improved.

PLEASE NOTE: Does not include Spring Reverb Tank.
Read more
 2 in stock $225.73
Cat: 685134 Rel: 24 Jul 18
 
Random gate/voltage generator - 18HP
Notes: Marbles is a source of random gates and voltages, which offers an extensive amount of (voltage) control on all the different flavours of randomness it produces.

The module gives the musician many different ways of imposing structure on the random events generated by the module: synchronization to external clocks, control of the repetition or novelty of the generated material, quantization of the voltages, or randomization of gates or voltages generated by traditional sequencers.

T: The random gate generator

Marbles either follows its own internal clock, or locks onto an adjustable multiplication/division of an external clock (or regular rhythmic pattern). This regular clock is perturbed by a process simulating an musician playing along a click and trying to catch up on their errors - from perfect accuracy to complete chaos.

From this imperfect master clock, a 2-channel random rhythm is generated, using one of the following processes: random coin toss (similar to Branches), random ratcheting, or random drum pattern generation (similar to a randomly modulated Grids).

X: The random voltage generator

This generator produces 3 channels of random voltages, each of them clocked by the individual outputs of the t section, or by a common external clock signal.

Complete control on the distribution of the output voltages is provided: concentrated or spread-out, quantized or unquantized, smoothed or steppy, centred or biased towards a specific voltage. The same transformations can be performed on an external CV, for sample-and-hold or shift-register operation.

An auxiliary slowly fluctuating random voltage output (Y) is also available for self-patching fun!

A feeling of deja-vu:

Marbles remembers the history of every recent clock deviation, rhythm or voltage it has generated. The DEJA VU knob on the panel controls the probability of reusing past material instead of sampling fresh random data.

You are thus given control on the feeling of repetition and structure in the generated random voltages and rhythms. At the extreme, the module no longer generates any novel values and loops over the same pattern (or a random permutation of it). And of course, this (variably) random looping can be performed on external CVs!
Read more
 3 in stock $236.09
Click for better price!
quote 685134
Cat: 731192 Rel: 19 Jun 19
 
CV-controlled 5-channel stereo mixer - 10HP
Notes: X-PAN is a compact and powerful 5 channel Voltage Controlled Stereo Mixer with Low Noise and High Headroom allowing for creation of complex panoramic audio imagery in just 10hp.

X-PAN is highly responsive to control signals allowing for exploration of the fluctuating stereo sidebands possible with Audio Rate Crossfading and Panning. X-PAN is Direct coupled for use as a CV Processing and Routing toolbox.

X-PAN consists of two full featured Channels and one simpler Channel. The top two Channels each have voltage controlled cross-fading and panning while the third Channel is a stereo aux input with stereo VCA. All three Channels are combined together at the stereo SUM outputs.
Read more
 More than 10 in stock $206.06
Cat: 596644 Rel: 18 Dec 15
 
Physical modelling synthesis Eurorack synth module - 14HP wide
Notes: Rings brings physical modelling synthesis to your Eurorack system, from a more modular angle than Braids' models or Elements. Instead of trying to be a complete instrument, Rings focuses on the key ingredient, the resonator, ready to be excited by envelope clicks, trigger pulses, granular noise or any other audio source produced by the rest of your system.

Three families of vibrating structures are simulated by the module, with CV control over their parameters:

- Strings, membranes and tubes as modelled by Elements' resonator section (modal synthesis).
- Strings coupled together and vibrating in sympathy, with controllable intervals between them.
- Strings with a variable amount of inharmonicity.

Rings can be configured so that each new note is played on its own virtual string, while the previously played note(s) still decay(s). This unique take on polyphony allows the module to play strummed chords.

*For audio demo, please visit - http://mutable-instruments.net/modules/rings
Read more
 6 in stock $294.07
Click for better price!
quote 596644
Cat: 602195 Rel: 10 Aug 16
 
Full featured VCO/LFO synth module - 8HP wide
Notes: Full-featured triangle core VCO/LFO

The Dixie II+ is a larger variant of the classic Dixie II. Using the same great triangle core oscillator, it adds a number of features to make it even more versatile with only a modest increase in size. The Dixie II+ makes a great primary oscillator for a modular system, or a great companion the Rubicon.
Read more
 5 in stock $207.09
Cat: 686269 Rel: 27 Apr 18
 
Universal, patch-programmable modulation source - 14HP
Notes: ASR envelope, complex 6-stage envelope, LFO, 4-step sequence or switched LFO: Stages can be any kind of modulation.

Not because all these behaviours have been pre-programmed in the module, but because it allows you to describe your own modulations in terms of basic operations: ramp from one voltage to another, hold a voltage at a set level, wait for a trigger and slew. With or without looping.

Whether you need one complex envelope, or several simpler modulations, Stages reconfigures itself according to which of its gate inputs are patched. There is always a role for it in your patch.

That's it. Really, there isn't more to the story.

Self-generating chiptunes? Very weird LFO shapes? Random gate delay? Stages probably does strange and wonderful things when patched in a certain way.

Flexible input/output layout:

The module detects the presence of jacks on its gate inputs to group its segments: whether it is configured as a complex 6-stage envelope, or 6 individual envelopes, or 3+3, 2+4... depends simply on how you patch it. Dummy patch cables might come handy!

When used as a multi-segment envelope, a segment activation signal is produced on all secondary outputs - for example to trigger an external event when an ADSR envelope enters its decay, sustain or release stages.

In case more than 6 segments are required, up to six modules can be chained together thanks to a connector at the back of the module.

Three segment types:

- Ramp segments go from one voltage to another, in a CV-controlled amount of time, with an adjustable curve (accelerating, uniform, decelerating). They are the building block used for the attack, decay or release segments in envelopes... or for LFOs.
- Hold segments stay at a constant (but CV-controllable) voltage for a programmable amount of time. They serve as the sustain or hold segments in envelopes.
- Step segments glide to a target (CV-controllable) voltage, then stay at this voltage for a certain amount of time until a trigger is received. They are the main ingredient for step sequences, but also for building sequential switches or a sample-and-hold.

Looping:

A segment, or a group of segments, can loop on itself: if the last segment of the envelope is included in the loop, the loop lasts forever. Otherwise, the loop remains active while the gate is high, then continues past the last segment of the loop. These two behaviours allow the creation of self-looping envelopes (LFOs), or the sustain stage of a good old ADSR envelope!

Single segment processing:

Even when they aren't part of any group and don't receive any gate or trigger signals, individual segments can perform interesting functions: Ramp can loop on itself and turn into an LFO, Hold can delay a CV and Step can slew it.

Now patch a trigger signal: the self-looping Ramp turns into a tempo-synced LFO, the Hold segment becomes a pulse generator, the Step segment a sample-and-hold.
Read more
 More than 10 in stock $238.15
Click for better price!
quote 686269
Cat: 581798 Rel: 04 Jan 16
 
Dual envelope generator & low frequency oscillator (LFO) eurorack module - 16HP wide
Notes: Based on the classic SYSTEM-100M modular synthesizer, the SYSTEM-500 is a fully analog recreation of one of the most revered electronic instruments of all time. Newly designed in Eurorack format, the SYSTEM-500 delivers the classic character and functionality of the original with the advantages of a modern instrument. Built in the USA and assembled in Japan, the SYSTEM-500 is made to exacting standards with top-quality components and solid controls. And it's surprisingly affordable, turning the fantasy of finally owning this legendary instrument into reality.

The SYSTEM-500 consists of Eurorack format modules that you can mix and match in any combination to create the ultimate Roland modular synthesizer. Each module is completely analog and has been designed for maximum compatibility with the world of contemporary synthesizer and effects modules. The SYSTEM-500 is a compact, powerful system that opens up vast possibilities for sound design and musical exploration.

The 540 Dual Envelope Generator and LFO (low frequency oscillator) is a multi-purpose modulation source. This unit features two independent ADSR (attack, decay, sustain, release) envelope sections that produce variable voltages for controlling other Eurorack format synthesizer modules such as oscillators, filters, and VCAs. Each section can be triggered externally, internally, or manually with dedicated jacks for each envelope, as well as an inverted output.

Additionally, the 540 includes a voltage controlled LFO with 5 waveform outputs. Front panel controls adjust both frequency and delay time of the LFO start. Delay and reset can be triggered from either envelope 1 or 2.
Read more
 2 in stock $292.77
Cat: 660453 Rel: 16 Aug 17
 
High quality MIDI to CV converter for Eurorack A100 format modular systems
Notes: Kenton's Modular Solo is a high-end MIDI/CV converter with lots of nifty additional functions. The module looks like a Eurorack version of the Pro Solo. However, it offers some nice additional features like clock divisors and more flexible auxiliary outputs.
Read more
 1 in stock $212.27
Cat: 688775 Rel: 31 Jan 19
 
Flexible five stage function generator - 19HP
Notes: The 'Quaid Megaslope' is a five stage function generator or modulator which operates in one of 3 modes; a multistage 'CZ' or 'Juno' style complex envelope, a super flexible LFO and a step sequencer with per step programmable slew or slides.

Each mode produces a varying output voltage moving from point to point across a set number of chained together stages. Each stage features a destination level, an overall rate or time to reach its destination level and a variable slope for the output path to take. As well as direct control, every stage feature voltage control of both level and rate. There are both unipolar and bipolar voltage outputs together with triggers emitted for the end of each stage and the end of a full cycle.

The Quaid Megaslope is designed to be fun, flexible and intuitive to use.
Read more
 2 in stock $221.59
Click for better price!
quote 688775
Cat: 607837 Rel: 18 May 16
 
Eurorack SID voice synth module - 19HP wide
Notes: The original SID GUTS took the legendary SID chip and tailored it into the eurorack modular environment. By use of a real SID chip the classic sound was taken in a new direction with the levels of direct and voltage control only a modular system can offer.

The 'SID GUTS DELUXE' improves upon the original SID GUTS 'Eurorack SID Voice' by adding both new features and further control.

The module now includes improved frequency control, a chord mode using all available oscillators and numerous other tweaks.

*SWIN SID chip included (please note - ALM & Juno do not offer any support for this product)*

Technical Specifications:
Supply: +/-12V
Current Draw: ~50-200ma (with vintage SID chip)
Size: 19 HP
Depth: 32mm (including power header)
Read more
 1 in stock $267.15
Cat: 628650 Rel: 17 Oct 16
 
Complete drum voice featuring algorithm selection, operator release envelopes, ratios, waveforms & feedback
Notes: 'Akemie's Taiko' is an authentic complete FM synthesis based drum voice created using original Yamaha IC's. It builds on the same technology used in the mighty Akemie's Castle but in a more complete triggered voice form featuring both signal generation and envelope shaping.

The module provides CV and direct control over a number of FM parameters including algorithm selection, operator release envelopes, ratios, waveforms & feedback. This gives a massive range of unique sounds.

The voice is able to track 1 volt per octave allowing it to be used for melodic lines as well as percussion. Also optional 'frequency ramps' can be enabled for additional audio effects.

The drum voice includes a trigger input as well as accent and choke trigger inputs to add further expressive and rhythmic control.
Read more
 4 in stock $252.65
Click for better price!
quote 628650
Cat: 648928 Rel: 25 May 17
 
Compact programmable clocked modulation source in Eurorack format - 8HP
Notes: 'Pamela's NEW Workout' is a compact programmable clocked modulation source for your Eurorack modular synthesiser system. It provides 8 highly editable outputs producing various control voltage signals correlated and synced to a BPM based master clock.

Building on the original 'Pamela's Workout', this new evolved model maintains the original's form factor and intuitive workflow but greatly improves on and adds many new features with upgraded hardware, a new OLED display and rewritten software.

Each output is now able to provide not just clocked triggers but also rhythmic waveforms with many parameters controllable directly and via assigning to external CV control. Pamela has grown beyond a clever clock and now provides almost limitless synced modulation possibilities.

Improvements have been made to overall clock stability and integration with external clocks and devices. Also new are dedicated MIDI and Din Sync clock outputs available via optional expander modules.
Read more
 9 in stock $225.73
Click for better price!
quote 648928
4ms Wav Recorder Module (synth module)
Cat: 648950 Rel: 29 Jun 18
 
6HP Eurorack module for recording high-fidelity, low-noise stereo WAV files
Notes: The WAV Recorder from 4ms Company is a high fidelity, two-channel stereo audio recorder with basic playback features. Accepting a wide range of input signals, from line-level to modular-level, the WAV Recorder stores audio onto a microSD card in lossless .wav format up to 96kHz/24-bit. The trigger jack can be used for capturing rhythmic loops or synchronizing multiple WAV Recorder modules for multi-track recording. In Playback mode, the trigger jack or button plays the most recent recording. A simple file/folder navigation system can be used to browse the folders on the card for playing back .wav files. A Gain knob allows for up to +20dB of boost, and an LED Signal Meter indicates clipping and the signal level.
Read more
 2 in stock $227.80
Cat: 676695 Rel: 20 Dec 18
 
Four-channel MIDI-CV interface for playing polyphonic patches - 16HP
Notes: Module A-190-5 is a four voice Midi/USB to CV/Gate interface. For each voice a pitch control voltage (CV1, 1V/octave standard to control VCOs), a gate output (to control envelope generators) and two additional control voltages (CV2, CV3) are available. The two additional CV outputs can be controlled by Midi velocity, volume, modulation, pitch bend, after touch or free assignable Midi controllers.

- Four voice monophonic (i.e. to control four monophonic voices by four succeeding Midi channels)
- Four voice polyphonic (i.e. to control four monophonic voices by one Midi channel) with several sub-modes (e.g. rotating/non-rotating)
- Two voice polyphonic (i.e. to control two monophonic voices by one Midi channel)
- Unisono

The basic mode is selected by means of a momentary switch (probably Mode or Algor.) and is shown in the LC display. Certain parameters of each mode can be edited (e.g. the midi channel(s), the midi reference note for 0V CV, assigned controllers for CV2 and CV3). For this the momentary switch Edit/Play is used. The parameter values (e.g. midi channels) are shown in the display and can be modified by means of the momentary switches 1...4. In Play mode the LEDs of these four switches display the gate states.
Read more
 2 in stock $267.15
Click for better price!
quote 676695
Cat: 698542 Rel: 14 Aug 18
 
Sound source deriving four subharmonics from an incoming square wave signal - 26HP
Notes: Module A-113 is a new sound source that derives four so-called subharmonics (German: Subharmonische) from an incoming pulse signal. The term subharmonics was introduced by Oskar Sala in connection with his so-called Mixtur-Trautonium. A subharmonic means in this context a sawtooth wave (German: Kippschwinger) whose frequency is derived from a master frequency and the master frequency is an integer multiple in the range of 1...24 of the subharmonic - in other words: the master frequency is divided by an integer 1...24 to obtain the subharmonic.

The output waveform of a subharmonic is sawtooth (as also used in the original Trautonium) and not sine. The term subharmonics is somewhat misleading. The master frequency comes e.g. from an A-110 or A-111 to the frequency input of the A-113. The frequency dividers of the 4 subharmonics is adjusted with up/down buttons as displayed with two character LED displays. The subharmonics are available as single outputs and as mix output with adjustable levels for the subharmonics.

Two gate type control inputs enable to select between 4 different mixtures, i.e. 4 different settings of the frequency dividers. In the original Trautonium these are controlled by foot switches to switch between 3 mixtures while playing (the original Trautonium has only 3 mixtures available but with the 2 gate inputs of the A-113 four different settings can be addressed).

Additionally, the A-113 features a mixture memory with 50 presets. Each preset consists of 4 mixtures that can be selected with the gate inputs, each mixture contains the values of the 4 frequency dividers.
Read more
 1 in stock $227.80
Click for better price!
quote 698542
Cat: 589490 Rel: 10 Dec 15
 
4 channel voltage controlled clock divider/multiplier synthesiser module with master tap tempo - 10HP wide
Notes: Four channel voltage controlled Clock Divider/Multiplier with master Tap Tempo. Each channel can be synced to the tap tempo, to the channel above, or to an external clock. Each channel also has a reset jack.

With a Tap Tempo button and five sync'ed clock outputs, the QCD is a versatile head-of-the-chain "Master" clock module, and/or a complex rhythmic pattern generator.
Read more
 1 in stock $217.44
Cat: 589494 Rel: 10 Dec 15
 
Compact, playable four-channel tap-tempo, clock-syncable LFO synthesiser module with variable skew and reset - 12HP wide
Notes: The Quad Pingable LFO is a compact, playable four-channel tap-tempo, clock-syncable LFO with variable skew and reset.

The QPLFO is designed to be useful in small portable systems that require maximum functionality in minimal space, as well as large systems that need maximum modulation sources.

Controls and jacks:
- Tap tempo button ("Ping") for manually setting the tempo
- Ping jack sets tempo with an external clock (any complex signal can be used as a clock)
- On/mute button enables or mutes the output (latching button)
- Skew knob and CV jack control the waveshape by altering the ratio between rise and fall times
- At 0% Skew (0V of CV), the shape is a "plucky" near-expo curve
- At 1% Skew (just over 0V of CV), the shape is ramp-down
- At 50% Skew (about 5V of CV), the shape is a triangle
- At 100% Skew (about 10V of CV), the shape is ramp-up
- Skew knob provides offset to the incoming CV signal, so any range of CV is acceptable
- Reset jack restarts the LFO without changing the tempo (rising edge triggered)
- OUT jack outputs either a 0 to 10V waveshape, or a -5V to +5V waveshape (jumper selectable)
- LED flashes and dims to the signal on the OUT jack
- Tap tempo button flashes to the internal tap-tempo clock or to incoming pulses on the Ping jack
- On/Mute button lights up when channel is On

Advanced:
- Ping and Reset inputs use comparators, so any waveshape can be used for triggering (audio waves, complex LFOs, even the QPLFO itself!)
- Trim-pot on PCB allows for adjustment of comparator threshold value

- "Fire-on-unmute" jumper per channel:
- When this optional jumper is installed, pressing the On button to turn the channel on will reset the LFO.
- If the jumper is not installed (factory default), pressing On will unmute the LFO without resetting (LFO runs in the background when muted)

- Bipolar/Unipolar jumper:
- Setting jumper to Bipolar makes the outputs -5V to +5V
- Setting jumper to Unipolar makes the outputs 0V to +10V
- One jumper controls all four channels

- One-shot mode: Reset jack can be used to trigger a one-shot envelope if the external ping clock is stopped. See manual for detailed discussion

- Floating Reset mode: Holding a high gate on Reset jack allows the waveshape to run freely without automatically re-syncing to the ping clock. A bare cable plugged into the jack causes a high gate

- Connects to other modules using ribbon cables:
- Outputs can connect to the 4ms VCA Matrix, or the 4ms SISM, the Circuit Abbey Intermix or the Toppobrillo Mixiplexer
- Normalization of ping jacks can connect to the 4ms Quad Clock Distributor
Read more
 1 in stock $242.30
Cat: 676518 Rel: 15 Feb 18
 
Multi-function Eurorack module - 10HP
Notes: Sewastopol is a multifunction Eurorack module designed for easy interfacing of external gear to your modular environment. It can export line and professional level audio, import audio from instruments and electroacoustic transducers, and analyse the incoming audio to generate voltages and triggers to control your modular system.

This is a second, vastly improved revision to the original 2014 Sewastopol, featuring a completely redesigned preamplifier circuit, better ergonomics and various other improvements.
Read more
 2 in stock $213.30
Cat: 718919 Rel: 23 Apr 19
 
Expander for XAOC Devices Praga mixer
Notes: The XAOC HRAD is an expander for their Praga voltage-controlled mixing console, adding CV control for Aux levels, master level control, gate-controlled muting, and other powerful features.

- Additional set of controls for the PRAGA mixer
- Stereo sum level control
- Euro/line switchable output level
- Sum LED meters
- Stereo headphone amp
- Cue input
- Mix/solo cue auditioning
- Individual AUX inserts
- Voltage control over AUX send amount
- Two stereo controls for AUX return level
- Gate inputs for VC channel muting
- Power drawn from Praga
Read more
 3 in stock $223.66
Cat: 633368 Rel: 28 Nov 16
 
All-analogue voltage controlled filter module - Eurorack compatible
Notes: Belgrad is an all-analogue voltage controlled filter module which - on par with our other modules - brings something new to the table. While it can be used as a traditional VCF for "academic" subtractive synthesis, we guarantee countless hours of exciting timbral explorations thanks to its unique character, flexibility, and features. The most prominent feature is that it offers a multitude of frequency responses with two resonant peaks.

- Eurorack synth compatible
- 14HP, skiff friendly
- Current draw: +45mA / -42mA
- Reverse power protection
Read more
 3 in stock $273.36
Cat: 633369 Rel: 05 Dec 16
 
Analog signal processing module with simultaneous four & six-stage outputs - Eurorack compatible
Notes: Kamieniec is an analog signal processing module directly inspired by a range of classic phaser effect units from 1970s that helped to define entire musical genres. Most of these classic devices contained a fairly small number of phase shifting stages, but made up for that lack with tons of character! However, what was initially intended for guitars is not necessarily sufficient for synthesizers. Therefore, the intention is to preserve the classic sound as it's transported it to a new tonal space while prioritizing flexible modular usability.

Just like many of the famous OTA-based phasers of the 1970s, Kamieniec sports four tuneable stages. However, there are two additional fixed stages included so as to increase the number of notches, and ultimately offer two versions of the mixed signal (that may be used as a stereo pair) at the two outputs of the unit. While the general topology is similar to a certain very classic phaser pedal, the circuitry has been redesigned with modern components and low noise op-amps to bring down the noise floor, improve the bandwidth, and offer a wider range of tuning. The feedback control can be set extremely deep, which results in a very high resonance that is capable of self-oscillation. This produces a unique sound otherwise unreachable for typical phasers, which can vary from subtle and creamy to utterly brutal and grinding. On top of that we've included switchable feedback paths, individual stage group outputs, CV inputs, built-in LFO, and daisy chaining ability to provide a comprehensive integration with a modular synthesizer system.

Expandability:
Unlike any other phaser module, multiple Kamieniec units can be chained together to achieve a more radical response with many notches. The general idea of chaining is to pass along the phase shifted signal to subsequent units before it is mixed with the original version in the last unit of the chain. This approach has a very different effect than plain cascading (connecting multiple phaser units in series), because a long chain of allpass sections yields a dense and uniform pattern of multiple notches, exactly like in a long phaser.

- Eurorack synth compatible
- 9hp, skiff friendly
- Current draw: +40mA / -40mA
- Reverse power protection
Read more
 1 in stock $208.13
Cat: 689804 Rel: 03 Sep 18
 
Innovative quad envelope - 10HP
Notes: Zadar is a powerful, four-channel envelope, modulation, and transient generator, in a compact yet very complete, feature-rich package. It is capable of synthesising a vast palette of envelope shapes starting from hundreds of shapes stored in the memory. These starting shapes are not mere wavetables, but flexible vectors that can be stretched (from a fraction of a millisecond to half an hour), flipped, warped, distorted, delayed, shuffled, repeated, and amplitude modulated in real time. A set of freely assignable CV inputs allows for external control of most parameters. Each channel can work independently or combined with other channels within one of the chaining and looping algorithms.

Operating Zadar is quick and immediate, thanks to its accessible interface and crisp OLED display. The main screen displays all parameters together with the currently selected shape. Entering the simple 3-page menu is needed only for advanced settings.
Read more
 1 in stock $268.18
Cat: 621354 Rel: 28 Nov 16
 
Quadruple Low Frequency Oscillator (LFO) synth module in Eurorack format - 10HP wide
Notes: Batumi is a fully voltage controlled, quadruple digital LFO module with a slew of interesting and user-customizable features. Each oscillator can be used independently or in one of 3 synchronized modes: quadrature, phase and divide. For each oscillator, there are sine, square and assignable (saw, ramp, triangle and trapezoid) waveform otputs available. Voltage control is possible for each oscillator's frequency, reset, and external sync ("tap tempo"). The total frequency range spans from 28 hours in voltage controlled divide mode, up to 500 Hz.
Read more
 6 in stock $237.12
Cat: 668637 Rel: 09 Nov 17
 
6-channel performance mixer with EQ's & mutes
Notes: Hex mix VCA is a compact six channel VCA with an unique response curve range from logarythmic to linear and to exponential using a pot.

All outputs are routed to output six to act as a mixer, with a normalization of each one to remove each VCA from the Mix.

Hexmix VCA can act as six independent VCAs as well as a Mixer for all the inputs (Selectable via a switch). Featuring an internal connection to interface with our Hexmix system.

Every VCA has a response pot for the incoming CV, being full logarythmic at maximum setup and full exponentiall at minimum setup, having the linear response in the centre position.

The pot provides the full range of responses to adecuante to our prefered application, such as percusive sounds or panning effects.

Level pot of each channel is an attenuator of the signal coming out of each VCA.

Jacks are normalled to 10 volts, so when we have no CV present VCA would be fully open and our Level pot will act as a volume.
Read more
 1 in stock $236.09
Cat: 689669 Rel: 14 Feb 19
 
Punchy kick drum module - 6HP
Notes: Kickall is a 6HP compact synth voice that features everything needed to make a big fat Kick sound: A stable VCO that tracks V/oct, a couple of VCAs, envelopes for volume and pitch and an aggressive wave shaper.

The module has been designed with a kick synthesis patch in mind: VCO to VCA with an envelope to open the VCA and another one to change VCO pitch. As addition a CV controlled waveshapper has been added to the VCO and an extra VCA at the end of the signal path to control the volume of the sound to act as kind of an accent.
Read more
 4 in stock $218.49
Click for better price!
quote 689669
Cat: 689665 Rel: 14 Jun 18
 
VC addressable sequential switch & sequencer - 16HP
Notes: Muxlicer is a sequential signal processor designed for add a huge range of special functions to your modular setup in the minimum space.

Muxlicer is divided in three main blocks: Digital Step Controller, Gate Generator and Analog Switch (a.k.a. Mux/DeMux).

The module is designed with high "function to HP ratio" philosophy, to have maximum flexibility in minimum space.
Read more
 2 in stock $214.35
Click for better price!
quote 689665
Cat: 633328 Rel: 28 Nov 16
 
Full-featured synth module including saw/square wave oscillator, ladder type low pass filter, decay envelope & VCA
Notes: The Domino is a redesign of its desktop synth bigger brother. Packing a full-featured synthesizer voice into 10HP, the Domino includes a saw/square wave oscillator, ladder type low pass filter, decay envelope and VCA. A plethora of patching possibilities makes this module a keen choice for portable systems, and those looking for deep sonic crafting within a tight HP space. Pair with a sequencer for instant basslines and acid lead lines, add some modulation to unlock the full sound design potential

Controls:
- Cutoff - filter frequency
- Res - filter resonance
- Switch - switches between gate>VCA to envelope>VCA
- Pitch - pitch tuning
- Mix - blend saw and square waves
- P Mod - pitch modulation attenuator
- Decay - envelope decay
- Filter Envelope - modulation amount, pre-patched from envelope to filter
- F Mod - filter cutoff modulation attenuator

In:
- CV
- VCA
- PWM (square wave)
- Mix 1 in - input for external oscillator/sound source to replace saw wave
- Gate - gate in
- P Mod - pitch modulation, pre-patched to envelope
- F Mod - frequency modulation for filter cutoff, pre-patched to CV in
- Mix 2 in - input for external oscillator/sound source to replace square wave

Out:
- Saw
- Square
- Env - envelope output
- Out - out from VCA
Read more
 2 in stock $239.19
Click for better price!
quote 633328
Cat: 690942 Rel: 19 Sep 18
 
Dual drive & distortion module with two independent distortion circuits 10 HP
Notes: For extreme, distorted drums Dual Drive module is a must! The module features two identical overdrive sections with adjustable Gain and Drive level, each with three flavours of overdrive.
CV control over Gain and Drive adds more expression, while built in limiter prevents output signal to run into undesired clipping.

Furthermore, the output of the first section is normaled to the input of the second, so you automatically get extreme, versatile dual overdrive circuit.
The module can be used in the stereo applications as well and it's not limited for drums only - it will turn any sound source into roaring monster.
Read more
 3 in stock $222.62
Click for better price!
quote 690942
Cat: 703010 Rel: 01 Oct 18
 
5U format digital synthesiser voice module
Notes: Manis Iteritas Magnus is a voice based on the architecture of Basimilus Iteritas, but designed to be more gritty and aggressive. It accomplishes this by producing only sawtooth waves that are manipulated, modulated, and distorted through a rethought interface. Manis is suitable for leads, bass lines, drums, darkness, detuned madness, or pure mayhem.

Size: 2 MU
Depth: 1.5 Inches
Read more
$257.84 SAVE 20%
 More than 10 in stock $206.27
Cat: 739108
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Mimetic Digitalis is a 10HP step sequencer optimized for live use. MD includes four individually editable CV outputs and a trigger out. Each step can be manually programmed or use MD to live record CV sequences using the encoder. The zero button mutes the CV at a step and shred randomizes the voltage. Save and load up to 16 patterns. Edit a pattern and use undo to return to the unedited version.
Read more
 1 in stock $215.01
Cat: 703012 Rel: 01 Oct 18
 
Analogue-inspired parameterised digital percussion
Notes: Basimilus Iteritas Magnus is a digital drum synthesiser with its roots in the analogue world. At its heart is a six-oscillator additive synthesiser with adjustable waveform, harmonic spread, attack, decay and noise. These get fed into a built-in wave folder for extra crunch.

Size: 2 MU
Depth: 1.5 Inches
Read more
 8 in stock $284.75
Cat: 717577 Rel: 31 Jan 19
 
Stereo mixer featuring 3 mono channel strips with level potentiometers - 14HP
Notes: Erica Synths Black Output is a high-quality output mixer and a stereo panner with balanced outputs and headphone amplifier for monitoring your modular masterpieces.

All inputs are buffered, we use stereo potentiometers (similar to those used in high quality studio mixers) for panning, IN4 is a stereo input with simultaneous level adjustment for both channels, IN3 has a CV controlled auto-pan function. There is also a 6.3mm jack for the balanced outputs and headphones.
Read more
 1 in stock $247.47
Cat: 741570 Rel: 29 Jul 19
 
Dynamic rhythm generator module
Notes: Integra Funkitus takes up to four input rhythms and combines and modifies them into rhythm outputs. There are three modes: two based on probability and one on generalized logic combinations.

Feed up to four rhythms from a rhythm module (such as Numeric Repetitor) into the inputs.

Connect the gate outputs to percussion modules, then turn the knobs to control how the rhythms are combined and modified.

Size: 8HP Eurorack
Depth: 1 Inch
Power: 2x5 Eurorack
Draw +12V: 50 mA
Draw -12: 5 mA
Read more
 3 in stock $227.80
Click for better price!
quote 741570
Cat: 690939 Rel: 25 Oct 18
 
Synth module for creating punchy tom sounds - 16HP
Notes: Toms is developed in collaboration with the French company e-licktronick and it's Erica Synths' take on analogue toms circuits adapted for modular systems. Massive, punchy sound, Accent and Tone CV make it distinctively expressive in studio and live performances.
Read more
 1 in stock $284.75
Click for better price!
quote 690939
Cat: 641950 Rel: 28 Feb 17
 
Probabilistic beat crossfader module
Notes: Confundo Funkitus crossfades between two sets of four rhythms using probability. Three different probability curves can be selected to control the behaviour of the crossfader. Per-part switch mutes are included with live performance in mind.

Connect up to four rhythm outputs to each of the two sets of inputs. Connect the outputs to modules that take triggers. Drums that take triggers are perhaps the easiest.

Toggle the Curve switch to the top position. If the crossfader is fully left, then only inputs on the left will create gates. If the crossfader is positioned in the middle, the Centre light is illuminated the two rhythms are blended together: gates are generated any time either rhythm is played. If the crossfader is all the way to the right the gates generated come from the second (right-hand) set of inputs.

Between these extremes the produced rhythm is a combination of both sets of input weighted by the position of XFADE and which curve is selected.

Size: 12HP Eurorack
Depth: 1 Inch
Power: 2x5 Eurorack
Draw +12V: 50 mA
Draw -12: 5 mA
Read more
 1 in stock $217.44
Cat: 690947 Rel: 01 Nov 18
 
Two Spin FV-1 chips in one module, each filled with eight custom effect programs
Notes: To add some space to your compositions and nuances in sound design Erica Synths Dual FX module brings you two identical sections of 8 custom effects with two adjustable and CV controllable parameters.

Dual FX combines two Spin FV-1 chips in one module, each filled with eight custom effect programs with two adjustable and CV controlled parameters per effect and analogue dry/wet circuit. All parameter settings can be saved with the effect and recalled instantly during the performance. Also the output of the first FX section is normalised to the second input so creating huge layers of effects is easy.
Read more
 1 in stock $274.40
Click for better price!
quote 690947
Cat: 690937 Rel: 25 Oct 18
 
Synth module for creating bass drum sounds - 14HP
Notes: Bass Drum is developed in collaboration with the French company e-licktronick and it's Erica Synths' take on analogue bass drum circuits adapted for modular systems. Massive, punchy sound, Accent & CV control over key parameters of the module make it distinctively expressive in live performances.
Read more
 2 in stock $247.47
Click for better price!
quote 690937
Cat: 690941 Rel: 06 Feb 19
 
Sample-based drum module with analogue VCA & decay envelope - 10HP
Notes: Hi-Hats D is Erica Synths take on classical digital hi-hats. Instead of using an integrated circuit DAC chip Hi-Hats D are using 6-bit discrete DAC for that unmistakable crunchy sound. For amplitude shaping samples are passed trough AS3330 based VCA and are controlled with an analogue envelope generator for versatile and snappy sound. Extra feature is Open Hi-Hat looping - when it's on, a certain part of the sample is looped while the envelope decay is on, thus creating distinct, delay-like effect.

Erica Synths Drum Sequencer has connectors for internal Trigger and Accent connections to Erica synths Drum modules. The connections are made via six wire ribbon cables with 2x3 connectors (similar to Eurorack PSU connectors), and you can save some patch cables if you have a lot of Erica Synths Drum modules. Internal connections will work only with Erica Synths modules and no other manufacturer module will support this functionality. If you have Erica Synths Drum Sequencer and other Erica Synths Drum modules and want to use internal connections, select "Hi-Hats D with internal connectors" option. If you do not want to use internal connections, select cheaper "Hi-Hats D without internal connectors" option.
Read more
 1 in stock $227.80
Click for better price!
quote 690941
Cat: 712706 Rel: 10 Jan 19
 
Drum modulator featuring two independent modulation/pitched noise sources
Notes: Erica Synths Modulator is an advanced modulation and pitched noise source with focus on rhythmic (but not limited to) compositions in mind. It features two identical syncable to the BPM LFOs/noise sources with selectable morphing waveshapes. LFO frequency can be manually adjustable, as well as they provide frequency divisions and multiplication in Sync mode. Each LFO has two outputs- main one and secondary one with adjustable phase, so you can create evolving modulations. Furthermore, LFOs can be linked to work at the same frequency and the first LFO has built in VCA to control output signal amplitude.
Read more
 1 in stock $205.02
Click for better price!
quote 712706
Cat: 676565 Rel: 19 Jun 18
 
Complex 16-step CV sequencer - 10HP
Notes: Mimetic Digitalis is a 10HP step sequencer optimized for live use. MD includes four individually editable CV outputs and a trigger out. Each step can be manually programmed or use MD to live record CV sequences using the encoder. The zero button mutes the CV at a step and shred randomizes the voltage. Save and load up to 16 patterns. Edit a pattern and use undo to return to the unedited version.
Read more
 1 in stock $227.80
Cat: 747621 Rel: 20 Sep 19
 
8HP drum/percussion synth module
Notes: Originally inspired by audience applause, hip-hop samples, and classic drum machines, Fracture is a multi-particle percussion synthesizer that applies concepts from classic analogue clap circuits to granular synthesis methods.

It all starts from proprietary micro-samples we recorded specifically for this purpose and ends with an engine built to suit these samples.
Unlike our other percussion module, the Chimera which uses impulse rich samples as it's tonal centre, Fracture uses single impulse samples like Claps, Snaps, Ping Pong Balls, Opening a beer can, and many more. It then plays a group of similar samples back in a psuedo random order for unique hits. Density, Decay, and Tail affect tone and how "tight" your virtual clappers are to playing together.

Our goal was to design a clap percussion module covering the range from classic drum machine claps all the way to full audience applause. We ended up with a module that covers a huge range of timbres beyond claps. We hope this engine provides you with the tools to intuitively create wild percussion sounds that bring your system to life in a new way.
Read more
 2 in stock $263.01
Click for better price!
quote 747621
Cat: 728569 Rel: 20 May 19
 
synth module with professional trigger input and audio input
Notes: Feel the sizzle as you harness the energy of liquid metal. Forge your sonic desires, and rain hot fire onto the eardrums of your listeners. Cymbals, gongs, bells, and sheet metal are the territory of Crucible.

Have you ever wanted to start with the smallest cowbell, and then CV it until it becomes a gong larger than the room you're standing in? Crucible makes this possible.

By utilizing classic digital synthesis blocks like delay and digital filters, Crucible can fully synthesize, in real time, sounds similar to thin struck pieces of metal.

We expose the engine to the user through parameters specifically chosen for their sonic resemblance to the "parameters" of a real drum kit cymbal.

Size, Pitch, Tone, and Deform give the user the tools to shape their cymbal. The Excite knob allow the user to shape their exciter, completely changing Crucible's response. Finally, select where the exciter contacts the engine by triggering the EDGE and MID inputs, or trigger both to strike the "bell."

All of this adds up to a module that is lively and energetic, completely mimicking the feeling of playing a real cymbal, while still incorporating WMD's "New Sounds, Maximum Experience" philosophy.

- Realistic sound!

- Positional trigger input. Hit the edge, middle, or bell.

- 3 Model Types: Cymbal, Cracked Cymbal, and Curved Plate

- Audio input for experimental effects.

- Separate Pitch and Size controls for maximum realism.

- Choke input for perfectly timed catches.

- Proprietary Synthesis model using digital filter and delay networks. No samples!
Read more
 5 in stock $253.69
Click for better price!
quote 728569
Artikel 1 bis 50 von 120 auf Seite 1 von 3 anzeigen
1  2  3  »

Filter

Synth modules
DJ-Ausrüstung
Release Date
Close