100% Sicheres Einkaufen

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Sicheres Einkaufen

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Synth modules

Startseite  Equipment  

Synth modules

Options
Artikel 1 bis 50 von 224 auf Seite 1 von 5 anzeigen
1  2  3  4  5  »
Subscribe to our weekly Studio Equipment emails
2hp
Cat: 667369 Rel: 31 Oct 17
 
Gate-driven arpeggiator
Notes: Arp is a gate-driven arpeggiator with a multitude of chord types and playback modes. Voltage control over both root note and chord type allow for sequencing any combination of chords in any key imaginable.

With the rate of the arpeggio and reset capability in your own hands, you're free to create dynamic rhythmic melodies from your favourite chords. Take your tonality for a ride with Arp.
Read more
MRP:$125.96
 3 in stock $125.22
Click for better price!
or call +44 20 7424 1960
quote 667369
2hp
Cat: 725426 Rel: 03 Apr 19
 
Melodic percussion generator
Notes: Bell is a melodic percussion generator based on modal synthesis. By synthesizing the vibrations of complex geometric shapes, Bell provides a simple interface for creating metallic sounds that can both emulate acoustic instruments, and defy physics. Its sonic palette includes numerous physical models that span the range of vibraphone, marimba, glockenspiel and Tibetan bowls. In addition, damping allows for the articulation of all voices, and enables drastically changing the tone of your patch with a single knob turn.

It's time to ring your Bell!
Read more
MRP:$170.85 SAVE 22%
 2 in stock $134.06
2hp
Cat: 686012 Rel: 04 May 18
 
Comb filter with self oscillation capability
Notes: Comb is an IIR peaking comb filter with control over cutoff frequency, resonance that can be driven into self oscillation, and a dampening filter in the feedback path. An incredibly short, tuned delay line will alter the character of your input by imposing harmonic peaks on the source. Subtle settings can result in thickening timbres, reminiscent of phaser-like effects, while more extreme settings can create lustrous string sounds from white noise, or tear your waveform to shreds. Explore new sonic territory with Comb.
Read more
MRP:$125.96 SAVE 19%
 1 in stock $101.85
FORTHCOMING
2hp Comp Module (black faceplate)
2hp
Cat: 766649
 
compressor module
Notes: Compressor with side chain functionality.
Read more
MRP:$153.39 SAVE 17%
coming soon $127.82
FORTHCOMING
2hp Comp Module (silver faceplate)
2hp
Cat: 766648
 
compressor module
Notes: Compressor with side chain functionality.
Read more
MRP:$153.39 SAVE 17%
coming soon $127.82
2hp
Cat: 686019 Rel: 04 May 18
 
Looper module for Eurorack synthesisers - 2HP
Notes: Freez is a voltage controlled locked looper. It captures moments of audio in buffers, where they can be minced and mangled beyond recognition. Once frozen, adjusting size will cause pitch and timbre changes to the locked audio.

Adjusting the sample rate control will distort and decimate the incoming audio as well as warp the time domain of the currently locked buffer. From beat repeat to granular audio buffer, Freez will create new sounds and textures out of any input signal.
Read more
MRP:$148.40
 1 in stock $146.53
Click for better price!
or call +44 20 7424 1960
quote 686019
2hp
Cat: 652192 Rel: 06 Jun 17
 
Looper module for Eurorack synthesisers - 2HP
Notes: Freez is a voltage controlled locked looper. It captures moments of audio in buffers, where they can be minced and mangled beyond recognition. Once frozen, adjusting size will cause pitch and timbre changes to the locked audio.

Adjusting the sample rate control will distort and decimate the incoming audio as well as warp the time domain of the currently locked buffer. From beat repeat to granular audio buffer, Freez will create new sounds and textures out of any input signal.
Read more
MRP:$148.40 SAVE 26%
 1 in stock $109.12
Click for better price!
or call +44 20 7424 1960
quote 652192
2hp
Cat: 686020 Rel: 04 May 18
 
Versatile hi hat with six oscillator architecture
Notes: Hat is a hi-hat cymbal with a wild side. Finding something unique is easy with a blend of sounds ranging from robotic to metallic. At its core are three unique sound sources made up of six oscillators, a noise generator, and a number of filters. Sizzle affects each source independently, adjusting oscillator and filter frequencies, allowing for a broad range of sounds. In addition, separate trigger inputs for open and closed allow for a complete hi-hat pattern on a single module. No matter what situation it's in, Hat provides shimmering, metallic timbres for any percussive purpose.
Read more
MRP:$148.40 SAVE 18%
 2 in stock $121.59
Click for better price!
or call +44 20 7424 1960
quote 686020
2hp
Cat: 675793 Rel: 26 Jan 18
 
Versatile hi hat with six oscillator architecture
Notes: Hat is a hi-hat cymbal with a wild side. Finding something unique is easy with a blend of sounds ranging from robotic to metallic. At its core are three unique sound sources made up of six oscillators, a noise generator, and a number of filters. Sizzle affects each source independently, adjusting oscillator and filter frequencies, allowing for a broad range of sounds. In addition, separate trigger inputs for open and closed allow for a complete hi-hat pattern on a single module. No matter what situation it's in, Hat provides shimmering, metallic timbres for any percussive purpose.
Read more
MRP:$148.40 SAVE 18%
 1 in stock $121.59
Click for better price!
or call +44 20 7424 1960
quote 675793
2hp
Cat: 675790 Rel: 26 Jan 18
 
Flexible kick drum synthesiser
Notes: Kick is a bass drum synthesizer with a dramatic timbral range. Its flexible synthesis engine ranges from 808 to IDM with its punchy kicks and smooth distorted tones. 1V/Octave tracking across five octaves allows for tonal sequencing of the entire frequency range. Drop a beat with Kick.
Read more
MRP:$148.40 SAVE 24%
 1 in stock $113.27
FORTHCOMING
2hp Loop Module (black faceplate)
2hp
Cat: 766647
 
loop module
Notes: Sound on sound looper with 5 minute audio buffer.

Audio specs: 48kHz, 24 bit.
Read more
MRP:$172.10 SAVE 17%
coming soon $143.42
FORTHCOMING
2hp Loop Module (silver faceplate)
2hp
Cat: 766646
 
sound looper module
Notes: Sound on sound looper with 5 minute audio buffer.

Audio specs: 48kHz, 24 bit.
Read more
MRP:$172.10 SAVE 17%
coming soon $143.42
2hp
Cat: 706870 Rel: 15 Oct 18
 
Voltage controlled multi mode filter
Notes: MMF is an analogue, multimode filter with a 12dB per octave slope. Its sonic character swings all the way from classic low pass to squelchy acid lines. Simultaneous outputs of low pass, high pass, and band pass filter types are provided allowing for many variations of the input signal. Whether you're looking for smooth and creamy, or resonant and wild, MMF can go there.
Read more
MRP:$137.18 SAVE 23%
 2 in stock $105.48
2hp
Cat: 706868 Rel: 15 Oct 18
 
Voltage controlled multi mode filter
Notes: MMF is an analogue, multimode filter with a 12dB per octave slope. Its sonic character swings all the way from classic low pass to squelchy acid lines. Simultaneous outputs of low pass, high pass, and band pass filter types are provided allowing for many variations of the input signal. Whether you're looking for smooth and creamy, or resonant and wild, MMF can go there.
Read more
MRP:$137.18 SAVE 19%
 1 in stock $111.20
Click for better price!
or call +44 20 7424 1960
quote 706868
FORTHCOMING
2hp Pitch Module (black faceplate)
2hp
Cat: 766655
 
pitch shifter module
Notes: Time domain pitch shifter with flutter control.
Read more
MRP:$137.18 SAVE 17%
coming soon $114.32
FORTHCOMING
2hp Pitch Module (silver faceplate)
2hp
Cat: 766651
 
pitch module
Notes: Time domain pitch shifter with flutter control.
Read more
MRP:$137.18 SAVE 17%
coming soon $114.32
2hp
Cat: 709207 Rel: 05 Dec 18
 
Compact sampler featuring Micro SD slot for easy sample loading - black faceplate
Notes: Play is a high-fidelity sample player with a full feature set.

Up to 32 samples can be loaded at a time and dynamically switched between using the file knob and associated CV input. Playback modes include one-shot, looping, or gated playback; all with extremely low latency. Transform your samples by pitching them up two octaves or down three octaves, all with a pitch knob that can be free running or quantized to semitones. The pitch CV input tracks volt per octave across its entire range and allows for musical sequencing of samples. Play ships with a pre-loaded SD card packed with loops, drum hits, and field recordings to get you up and running immediately.
Read more
MRP:$170.85 SAVE 18%
 1 in stock $139.25
2hp
Cat: 709206 Rel: 05 Dec 18
 
Compact sampler featuring Micro SD slot for easy sample loading - silver faceplate
Notes: Play is a high-fidelity sample player with a full feature set.

Up to 32 samples can be loaded at a time and dynamically switched between using the file knob and associated CV input. Playback modes include one-shot, looping, or gated playback; all with extremely low latency. Transform your samples by pitching them up two octaves or down three octaves, all with a pitch knob that can be free running or quantized to semitones. The pitch CV input tracks volt per octave across its entire range and allows for musical sequencing of samples. Play ships with a pre-loaded SD card packed with loops, drum hits, and field recordings to get you up and running immediately.
Read more
MRP:$170.85 SAVE 18%
 1 in stock $139.26
Click for better price!
or call +44 20 7424 1960
quote 709206
2hp
Cat: 778513 Rel: 05 Dec 18
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Play is a high-fidelity sample player with a full feature set.

Up to 32 samples can be loaded at a time and dynamically switched between using the file knob and associated CV input. Playback modes include one-shot, looping, or gated playback; all with extremely low latency. Transform your samples by pitching them up two octaves or down three octaves, all with a pitch knob that can be free running or quantized to semitones. The pitch CV input tracks volt per octave across its entire range and allows for musical sequencing of samples. Play ships with a pre-loaded SD card packed with loops, drum hits, and field recordings to get you up and running immediately.
Read more
 1 in stock $130.67
2hp
Cat: 684048 Rel: 28 Mar 18
 
Karplus-Strong based physical modelling synth module - 2HP
Notes: Pluck is a physical modelling synth voice. It uses the Karplus-Strong algorithm to create plucked string sounds. The dampening control sets the size of the string and allows for dramatic timbral shifts.

The decay control changes note length from percussive transients to infinite harp sounds. In addition, four voice polyphony provides complex layered tones; all from a single sound source.

Strum a new chord with Pluck.
Read more
MRP:$170.85 SAVE 19%
 3 in stock $138.22
2hp
Cat: 727389 Rel: 02 Oct 19
 
Digital oscillator module with sub output & wavefolding - black
Notes: Sine is a harmonically pure VCO with two distinct outputs.

The primary output contains a perfect sine wave with a wide frequency range and pristine volt per octave tracking. The Sub output features two sine tones that can be blended together to achieve a mix of one octave below, or a fifth above the primary output's frequency.

In addition, both outputs have an internal wavefolder that adds harmonic content to the signal allowing for spectrally complex tones within a single module. Keep your tones pure (or not!) with Sine.
Read more
MRP:$170.85 SAVE 17%
 3 in stock $141.33
Click for better price!
or call +44 20 7424 1960
quote 727389
2hp
Cat: 727388 Rel: 23 May 19
 
Digital oscillator module with sub output & wavefolding - silver
Notes: Sine is a harmonically pure VCO with two distinct outputs.

The primary output contains a perfect sine wave with a wide frequency range and pristine volt per octave tracking. The Sub output features two sine tones that can be blended together to achieve a mix of one octave below, or a fifth above the primary output's frequency.

In addition, both outputs have an internal wavefolder that adds harmonic content to the signal allowing for spectrally complex tones within a single module. Keep your tones pure (or not!) with Sine.
Read more
MRP:$170.85 SAVE 17%
 1 in stock $141.33
Click for better price!
or call +44 20 7424 1960
quote 727388
2hp
Cat: 686037 Rel: 04 May 18
 
Snare drum module featuring classic to esoteric snare sounds & blips
Notes: Snare goes from short blips to 909 hits and everywhere in between. More than just a typical snare sound, this module is a powerful sound design tool that encourages exploration. 1V/Octave tracking allows percussive melodies with atypical timbres, while snap dials in the texture of the metaphorical membrane. Hit the back beat with Snare.
Read more
MRP:$148.40 SAVE 24%
 1 in stock $113.27
2hp
Cat: 675792 Rel: 26 Jan 18
 
Snare drum module featuring classic to esoteric snare sounds & blips
Notes: Snare goes from short blips to 909 hits and everywhere in between. More than just a typical snare sound, this module is a powerful sound design tool that encourages exploration. 1V/Octave tracking allows percussive melodies with atypical timbres, while snap dials in the texture of the metaphorical membrane. Hit the back beat with Snare.
Read more
 1 in stock $113.27
2hp
Cat: 704937 Rel: 01 Oct 18
 
Powerful, easy-to-use speech synthesiser & oscillator
Notes: Vowel is a speech synthesis and formant oscillator. It synthesises and approximates the human voice by generating vowel sounds. These can be manipulated to provide deep low baritones, or high-pitched squeaks. Two unique algorithms provide separate takes on this exciting synthesis method and allow for a multitude of talking synth sounds.
Read more
MRP:$170.85 SAVE 19%
 1 in stock $138.22
Click for better price!
or call +44 20 7424 1960
quote 704937
Cat: 739048 Rel: 29 Jul 19
 
Eurorack power supply module - 4HP
Notes: Row Power is a clean, regulated, and protected power solution for eurorack systems. Row Power 35 provides 35W of power, suited for any typical eurorack row (84HP to 168HP):

+12V @ 1.4A
-12V @ 1.25A
+5V @ 1.0A

Simply plug a universal power supply (laptop style) into either of the barrel plugs on the 4HP panel. Connect your modules via flying-bus cables or the Bus Stick.

Daisy-chain multiple Row Powers to use a single power brick for multiple rows (typically 3-5 rows per power brick). Each row will be independently regulated and protected for ultra-low cross-talk between rows. Rows can also be hot-swapped (plugged/unplugged without powering the whole system down).
Read more
MRP:$165.86 SAVE 24%
 2 in stock $126.79
ACL Sum Sum Mixer Module (synth module)
Cat: 776668 Rel: 30 Jun 20
 
mixer module
Notes: The ACL SUM SUM consists of two rows of six inputs that are summed into one output each.

It can be used as a stereo signal summer or two mono signal summers, either audio or CV.

The internal gain of each row can be switched between Unity gain, a gain of 0.5 (-6dB) or 0.33 (-9.5dB) using convenient dip switches on the back of the module.
Read more
MRP:$168.36 SAVE 17%
 2 in stock $140.29
FORTHCOMING
ADDAC System ADDAC103 T-Networks Module (black faceplate)
Cat: 776114
 
4-voice percussion module
Notes: Inspired by Twin T-Networks circuits used in many lengendary drum machines, ADDAC system have developed a simple and straight forward 4 voice percussion module with frequency controls for each of its voices.

At each voice input there's a gate to trigger converter so any input source is possible.
Audio inputs can also be used as an input, in this case and due to the nature of the gate to trigger converter, each voice can be used as very destructive filters.

The top 2 channels feature a higher frequency range, the bottom 2 channels feature a lower frequency range.

Tech Specs:
6HP
2.5 cm deep
40mA +12V
40mA -12V
Read more
MRP:$107.25
coming soon $102.87
FORTHCOMING
ADDAC System ADDAC105 4 Voice Cluster Module (black faceplate)
Cat: 776118
 
4-voice cluster module
Notes: Following the ADDAC103 T-Networks, this new module is inspired by it's simplicity. This is a 4 voice Square Oscillator with VCA, FM switch and a slew decay for the incoming Trigger IN. All voices are then sent through a Multimode Filter.

Each voice has it's own VCA input where any input is accepted (Trigger, Gate, CV) The [DECAY] controls the slew decay applied to the incoming signal, if [DECAY] is fully anti-clockwise then it works as a Mute. The [FM ON] switches activate/deactivate the FM input coming from the previous voice: Voice 1 FM comes from voice 4, voice 2 FM comes from voice 1, and so on, so you can FM all of them in a FM loop.

All 4 voices are summed and sent through a filter with controls over [CUTOFF] with an Attenuverter for the CV input and [RESO- NANCE]. Three filter outputs are provided [LOWPASS], [BANDPASS] and [HIGHPASS]

The [EXTERNAL IN] input can be routed through a jumper on the back of the module allowing the incoming signal to go to:
the filter input for processing an external audio source.
all of the 4 voices Frequency control allowing for some experi- mental CV control over pitch of all 4 voices at the same time (due to the specificities of the circuit and to keep the module at a low price these inputs are not callibrated to 1v/octave).

Read more
MRP:$107.25
coming soon $102.87
FORTHCOMING
ADDAC System ADDAC111B Ultra .WAV Player Expansion Module (red faceplate)
Notes: The ADDAC111B EXPANSION allows the user to access the first 8 files (a to h) through a trigger.

Files do not play simultaneously, if several triggers happen at the same time top priority goes from top to bottom- meaning that if B E and F triggers are received at once the file that will be played is file B.

The expansion module should be plugged to the back of the Ultra .Wav Player module. There's no connection to the bus boards.

Specificaitons:
Mechanical:
Format: Eurorack
Width: 16 hp
Depth: 3 cm

Control voltage i/o:
CV inputs: i 5v
CV outputs: 0 +10v

Electrical:
Max current: 150ma
Compatible with +-12v and +-15v power supplies
Bus board cable: 8x2 idc (doepfer style) connect
Read more
MRP:$128.45
coming soon $123.66
FORTHCOMING
ADDAC System ADDAC202 Amplifiers Module (red faceplate)
Cat: 776175
 
amplifier module
Notes: A dual channel Amplifier that either boosts your signals up to 10 times the original input or attenuates it to zero.

It also features two leds per channel, to monitor your output polarity.

MECHANICAL:
Format: Eurorack
Width: 4 HP
Depth: 2.5 cm

CONTROL VOLTAGE I/O:
CV inputs: i 10v
CV outputs: i10v

ELECTRICAL:
Max current: 30mA
Compatible with +-12v and +-15v power supplies
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$128.45
coming soon $123.66
FORTHCOMING
ADDAC System ADDAC208 Comparator & Rectifiers Module (red faceplate)
Notes: A Comparator is an electronic circuit that compares two voltages and switches its output to indicate which is larger. The Comparator operates between -10 or +10V

The Output is always -10V if below Threshold and +10V if above Threshold.

A Rectifier is an electronic circuit that is used to transform AC signals to an equivalent DC signal while removing one of it's polarities, i.e. Positive rectification excludes negative signals and vice-versa.
Both sections can be used to change the shape of any waveform as well as its harmonic content.

FRONTPANEL:
1 Comparator Threshold Knob
1 Comparator Jack Output
2 Comparator Monitor Led1 Common Signal Jack Input
4 Rectificated Outputs

MECHANICAL:
Format: Eurorack
Width: 4 HP
Depth: 2.5 cm

CONTROL VOLTAGE I/O:
CV inputs: i 10v
CV outputs: i10v

ELECTRICAL:
Max current: 30mA
Compatible with +-12v and +-15v power supplies
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$128.45
coming soon $123.66
FORTHCOMING
ADDAC System ADDAC215 Dual S&H+ Module (black faceplate)
Cat: 776254
 
dual sample & holds module
Notes: This new module should not be judged by it's size, at 6hp it's packed with features.

At its core it features a noise source and two precision Sample & Holds with 0.01% of maximum deviation from the Input which allows for quantized signals to be sent through without any noticeable detuning or the typical voltage drops over time.

The Sample & Hold sections can also be used as a Track & Hold meaning it holds the incoming input while the Trigger input is ON and lets the input flow to the output when the Trigger input is OFF.
Each section also features it's own slew processor with a single control over attack and decay and an ON/OFF switch.

The noise signal is normalled to both sections inputs, meaning that without a jack plugged into the Input the sample and hold function will act upon the incoming noise signal generating random CV values.

The [Trigger A Alternate] switch allows to Link both sections so that any trigger input in Trigger A will alternate between triggering the A and B section.

Besides each section outputs there's also 4 extra outputs: Noise, Difference, Average and Sum. The Noise output is coming from the noise source, the Difference output is the subtraction of section A minus section B, the Average output is the sum of both A plus B and then divided by 2 and finally the Sum output is the sum of both A plus B sections.

MECHANICAL:
Format: Eurorack
Width: 6 HP
Depth: 4 cm

ELECTRICAL:
Max current: +50mA/-50mA
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$134.69
coming soon $129.90
FORTHCOMING
ADDAC System ADDAC216 Sum & Difference Module (black faceplate)
Cat: 776260
 
sum & difference module
Notes: There are two equal sections in this module labeled A and B.

This module is a peculiar type of mixer that instead of just summing two input signals (X & Y) it also allows the possibility to subtract the two signals.
It works both for audio and CV signals and hence the possibility to get the diference of two CVs or cancel the phase of two audio signals. The resulting signal, of sum or subtraction, is then routed through a switchable (on/off) full rectification circuit labeled: Absolute. After this the gain of the mixed signal goes through another attenuverter labeled: Amplitude to control the resulting signal gain which, being an attenuverter, also allows the possibility to invert the incoming signal. After the Amplitude comes an AC/DC coupling switch followed by an bipolar Offset knob.

Besides the normal output, there's also an inverted output for each of the A & B sections.

The outputs of section A & B are also summed and sent to the Average Output.

Using a single input, just the X or Y input, the module can also be used as a simple dual Attenuverter & Offset CV processor with full rectification and AC coupling options.

Average mix output of both sections.
Read more
MRP:$134.69
coming soon $129.90
FORTHCOMING
ADDAC System ADDAC300 Power Starvation Module (150mA version) (red faceplate)
Notes: Power starvation is the first hack that any "DIY'er" learns. It's also one of the hacks that can generate some of the most interesting sonic effects in circuit bending, and ADDAC have applied this principle to the modular world. Plug any module of your choice through it and independently tune it's i power.

This will have most interesting effects in analog modules: filters, delays, mixers. They can either go silent or start screaming at your ears, going berserk with the lack of current to behaving normally.

Two IDC connectors on the back allow to independently plug 2 modules of your choice.

Bypass switches for easy operation.

The trimmers allow for setting a minimum voltage plateau. Most modules will shut down from 3 to 10v. These trimmers allow to set them at the right sweet spot and enjoy the full range of the pot for the power starving.

This module uses special potentiometers which are way more expensive than regular ones.

Specs:
. Passive Module
. Width: 4 HP
. Depth: 4 cm
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$128.45
coming soon $124.70
FORTHCOMING
ADDAC System ADDAC306 VC Transitions Module (black faceplate)
Cat: 776305
 
VC transitions module
Notes: ADDAC306 is a 5 channel multi-directional CV generator.

You can think of it as a "sweet spot" controller, or a hands-on way of transiting from one state to another.

Each of the five channels has MINIMUM, SPAN and DIRECTION controls, a common CV IN and a common TRANSITION CONTROLLER slider.

MINIMUM sets the minimum channel voltage.

SPAN sets the voltage range of the channel.
It essentially sets the maximum voltage that can be output from the channel, relative to what the current channel MINIMUM is. For a given SPAN value, if the MINIMUM voltage is changed then the maximum voltage output from that channel will also change respectively.

DIRECTION sets whether the voltage transition for each channel goes from MINIMUM to maximum, or maximum to MINIMUM.

The TRANSITION CONTROLLER slider controls the transition from the minimum value (A) to the maximum value (B) or vice versa, according to the settings of each independent channel.
Moving this slider generates 5 different voltages with 5 different ranges and directions. The transition can also be operated from a CV source at the CV IN, in which case the slider position acts as an attenuator for the incoming voltage.

The maximum range of each channel can be set to either 5 or 10 volts, by 5 jumpers in the back of the module. Only positive voltages are generated at the output.

Using the CV IN you can use two ADDAC306 modules to expand your control options to 9 voltage outputs under one common slider control.
Use the VC Transitions to multiply the polyphony of a single CV sequencer by passing its outputs through the ADDAC207.
VC Transition makes for an awesome state transition controller. Plug its outputs to various CV controller parameters of your audio effects modules. Set the slider to position A, and set the minimum values for each channel. Then move the slider to position B and set the SPAN settings for each channel. Use the TRANSITION CONTROLLER slider to morph from state A to state B and backwards. Flip the DIRECTION switches to change the direction of the transition for each channel. Use the CV IN to automate the transition using LFOs, ADSRs or sequencers.
Plug the output of your ADSR envelope to the CV IN and set the channels differently to get 5 different ADSRs from one common source.


This module was developed based on an initial idea by Konstantine Fioretos.
Read more
MRP:$128.45
coming soon $124.70
FORTHCOMING
ADDAC System ADDAC402B HRG Expansion Module (red faceplate)
Cat: 776312
 
MIDI expansion module
Notes: ADDAC402B MIDI Expansion allows full I/O Midi control of ADDAC402 plus access to a powerfull midi interface, with:

Midi Sync:
Allows the module to synchronize with any external MIDI device’s Clock, including transport messages like play, stop and continue.

CV to MIDI:
5 CV inputs (Fills 1 to 4 and Assign) to MIDI Notes and/or CC messages, the Note and CC number can be independently configured via the Configuration Menu.
These CV inputs can be sent on independent MIDI Channels, for ex: Fills 1 to 4 on MIDI Channel 1 and Assign on MIDI Channel 2.

MIDI Controller:
All panel controls (9 knobs, 4 toggle switches and 11 push buttons) can be sent to MIDI Out as CC controls as any standard MIDI controller. The individual CC numbers can be configured through the Configuration Menu.

MIDI to Gate:
All 4 Gate outputs can be controlled/sequenced from an external MIDI device.
For ex: we can configure Gate 1 to be responsive to CC 1, Gate 2 to CC 2 and so on. Everytime CC 1 gets a value of 127 Gate 1 will be turned ON, if it gets a 0 value Gate 1 will be turned OFF.

MIDI Control:
All panel controls (9 knobs, 4 toggle switches and 11 push buttons) can be controlled/sequenced from MIDI CC controls. This allow full automation of the module via MIDI
The individual CC numbers can be configured through the Configuration Menu and includes a midi learn feature for easier configuration.
Also controllable via MIDI is the change of Presets and Modes.
Read more
MRP:$107.25
coming soon $103.92
FORTHCOMING
ADDAC System ADDAC501B Complex Random Expansion Module (red faceplate)
Notes: The ADDAC501B expansion is connected directly to the ADDAC501 Complex Random. It extends functionality by adding gate outputs to the random generators.

If ADDAC501 generates a new random above the average between Minimum and Maximum, then the respective gate on ADDAC501B is triggered.

There are three pairs of gates, corresponding to the respective outputs on ADDAC501. Each gate pair has both positive and inverted outputs.

This expansion module also offers a dedicated knob for gliding effects. With it you can have a voltage ramp between two consecutive random numbers- randomized "legato" expressiveness.

Mechanical:
. Format: Eurorack
. Width: 4 HP
. Depth: 5 cm

Control Voltage I/O:
. Gate outputs: 0 - 5v

Electrical:
. Connects directly to ADDAC501
. Max current: 20mA
Read more
MRP:$128.45
coming soon $124.70
FORTHCOMING
ADDAC System ADDAC602 Passive Ring Modulator Module (red faceplate)
Cat: 776350
 
ring modulator module
Notes: A dual channel classic Passive Ring Modulator, with transformers and germanium diodes.

Mechanical:
. Format: Eurorack
. Width: 4 HP
. Depth: 3.5 cm

Electrical:
. Passive
Read more
MRP:$128.45
coming soon $124.70
FORTHCOMING
ADDAC System ADDAC801 Simple Mixer Module (red faceplate)
Notes: This module allows you to mix up to three input signals, either audio or control voltages.

Each of the inputs has a dedicated amplitude knob to control the channel volume.

Two mix outputs are available, a standard out and a secondary output with phase selection.

A jumper on the board allows the user to change the phase of the second output to be normal or inverted.


Mechanical:
. Format: Eurorack
. Width: 4 HP
. Depth: 2.5 cm

Electrical:
. Compatible with +-12v and +-15v power supplies
. Max current: 20mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$128.45
coming soon $124.70
FORTHCOMING
ADDAC System ADDAC810 Phono Pre-Amp Module (red faceplate)
Notes: The Phono Pre Amplifier module- connect your turntable to it and bring it's sound straight into any of your patches.

Specs:
. Width: 4 HP
. Depth: 4.5 cm
. Current: 40mA
Read more
MRP:$128.45
coming soon $124.70
FORTHCOMING
ADDAC System ADDAC812VU Module (black faceplate)
Cat: 776439
 
metering module
Notes: Stereo/dual VU metering module with buffered thru outputs for each channel.

An additional switch turns the beautiful lamps behind the VU meters off, in case your rack is running low on power!

A couple trimmers on the back of the module allows the user to define the VU range of each channel independently.

Mechanical:
. Format: Eurorack
. Width: 8 HP
. Depth: 3.5 cm

Electrical:
. Max current with lamps on: +100mA/-10mA
. Max current with lamps off: +10mA/-10mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$139.68
coming soon $135.10
Cat: 637041 Rel: 22 Mar 17
 
Precision buffered multiple module with individual output trimmers - dark edition
Notes: This is a precision active buffer and multiple. This module has outstanding performance: it features very high input impedance, very low output impedance and an offset voltage of <1mV.

Not all active multi's are born equal, some designs do not fully solve impedance mismatch and tracking problems, or they apply offset voltages to the output and in rare cases can cause more problems than they solve!

AJH Synth have added a very useful (and unique) feature to cure tracking problems: four of the five outputs can be adjusted up or down by +/-5% from the front panel, so that VCO's and VCF's that don't track 1V/Oct exactly can be easily compensated to track correctly without having to re-calibrate the VCO or VCF themselves.
Read more
MRP:$130.95 SAVE 17%
 1 in stock $108.09
Click for better price!
or call +44 20 7424 1960
quote 637041
Cat: 688774 Rel: 31 Jan 19
 
Compact digital oscillator with a resolution of 16Bit/48kHz
Notes: The 'MCO' is a compact digital oscillator. It features a main 'morphing' wavetable output, an additional copy of this output with overlaid variable pulse width segments (ala Alpha Juno style saw wave pwm) and a sub square wave output an octave down to the main output. The waveform and pulse segment width and be both directly and voltage controlled. The pulse segment distribution can also be voltage controlled via the 'type' input.

Expect an early 90s slightly crunchy digital type sound (ala Ensoniq, Kawaii KX synths) rather than something striving for perfect analog emulation.
Read more
 6 in stock $138.22
Click for better price!
or call +44 20 7424 1960
quote 688774
FORTHCOMING
Analogue Systems RS-180N VCA Module
Cat: 777037
 
VCA module
Notes: VCA-Module with exponential and linear control inputs. This way it can be controlled by any CVs and it is suitable to control audio signals as well as CVs.

With the "initial level" control you can open the VCA manually what is handy if the modulation signal is bipolar: e.g. when doing a tremolo with a sine wave LFO. Tow CV inputs with attenuators are available: The linear one is better when you want to control CV signals or if the modulation signal is a slow LFO. The exponential input is better for punchy, fast modulation, e.g. by an envelope and is also better suited when you want to control audio signals. Two signal inputs make a mixer module pre-VCA obsolete.
Read more
MRP:$158.38 SAVE 10%
coming soon $142.37
Cat: 749089 Rel: 24 Oct 19
 
Dual pre-amplifier module - 4HP
Notes: Inamp is a dual pre-amp in just 4 HPs. Featuring 6,3 Jacks inputs as well as Minijacks.

Both inputs are summed so you can use them at the same time as an input mixer.

The unit is designed to amplify up to x20 the input signal, allowing to amplify most of the music machines out there (Domestic line levels) as well as some guitars (Humbucker-like pickups and so).

The first channel is normalled to second one in series, so it's possible to have two stages of amplification or two separate ones.
Read more
MRP:$168.36 SAVE 36%
 3 in stock $108.09
Click for better price!
or call +44 20 7424 1960
quote 749089
Cat: 689670 Rel: 14 Jun 18
 
Output interface & headphone amp - 4HP
Notes: Befaco's new Output Module is designed to be the master output for your modular system, providing an extra Cue Input to monitor any signal.

Left IN is routed to both channels when no Right signal is present. Both Outputs are TRS balanced.

A Headphones out is available. You can route Headphone OUT to the main out or an independent signal with CUE switch. Like this you can either pre-listen your sounds with the CUE Input or listen to your main out without disturbing your neighbours!

Level LEDs are available to monitor levels of each signal on the module.
Read more
MRP:$168.36 SAVE 22%
 2 in stock $131.98
Click for better price!
or call +44 20 7424 1960
quote 689670
Cat: 716763 Rel: 14 Feb 19
 
Stereo mixer - 6HP
Notes: Stmix is a compact 4 channel stereo mixer with an Auxilliar input. This input will allow us to chain a few of them or to insert an extra fifth input.

This module is compatible with our Hexmix system, and can be internally connected to hexmix module to add the output of STMIX to your main mix.
Read more
MRP:$168.36 SAVE 23%
 7 in stock $128.86
Click for better price!
or call +44 20 7424 1960
quote 716763
FORTHCOMING
Behringer 112 Dual VCO Module
Cat: 780465 Rel: 27 Jul 20
 
analog dual VCO module
Notes: Eurorack module; two identical analog VCOs in one module.

Selectable waveforms: triangle, sawtooth and squarewave/pulse; adjustable pulsewidth and PWM CV input with attenuator; octave-switch and fine-tune control knob; hard and soft sync; 3 pitch CV inputs with attenuators;

Power consumption: 130mA (+12V) / 70mA (-12V); width: 16 HP; depth: 46mm
Read more
coming soon $103.92
FORTHCOMING
Behringer 121 Dual VCF Module
Cat: 772865
 
dual VCF module
Notes: This is the Behringer SYSTEM 100 121 DUAL VCF Module. An authentic reproduction of the original System 100M circuitry from the 80s that can fit in a standard Eurorack case, at a very affordable price. Mix the 121 DUAL VCF in with your existing rig or start your modular synth journey from here.

The 121 DUAL VCF features 3 CV inputs and 3-channel mixers per VCF; allowing you to independently mix all input signals. All of these inputs have their own attenuators to provide you more control over each signal that goes into the module.

Each VCF has its own output accompanied by a resonance slider that boosts resonance frequencies and a cutoff control to adjust the cutoff frequency of the lowpass filter. The 121 DUAL VCF also features a 3-mode Fixed HPF switch where you can select between Off, 1 (1 kHz), 2 (2 kHz) or 3 (5 kHz). Combine this with the resonance and cutoff sliders to create intricate and interesting patches.

Installing the 121 DUAL VCF is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 121 DUAL VCF to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $103.92
Artikel 1 bis 50 von 224 auf Seite 1 von 5 anzeigen
1  2  3  4  5  »

Filter

Synth modules
DJ-Ausrüstung
Release Date
Close