100% Sicheres Einkaufen

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Sicheres Einkaufen

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Synth modules

Startseite  Equipment  

Synth modules

Options
Artikel 1 bis 50 von 235 auf Seite 1 von 5 anzeigen
1  2  3  4  5  »
Subscribe to our weekly Studio Equipment emails
Cat: 775080 Rel: 22 Jun 20
 
sampling module
Notes: Bitbox micro provides Eurorack sampling for smaller racks and smaller budgets. In only 18 HP of rack space you can get a touch screen based sampler with support for 8 stereo sample pads. Now you can record samples directly into the module or load them from the microSD card. Trigger your samples via CV or MIDI, then apply effects and mix the outputs. Save your configurations to multiple presets for later reuse.

Sample Playback

Play up to 24 stereo polyphonic notes when your samples fit in the 64 MB of internal memory or up to 8 larger stereo samples streaming directly from the microSD card
Configure 8 stereo sample pads per preset as single or multi-samples, clips, slicers, granular or new recordings
Stream long samples from the microSD card with a max sample size of 4 GB, which can be many hours of audio
Trigger samples with the touch screen, CV gate inputs, or MIDI input
Control how samples start and stop by choosing from one-shot, toggle, and gate launch modes
Tweak playback through a variety of sample parameters, including start position, length, pitch, gain, filter, loop mode, launch quantization, ADSR, Exclusive Grouping, clip synchronization, slice placement and sequencing, grain size, grain spread, grain count, and MIDI note and channel mapping

Sample Recording

Record Eurorack level audio straight into the module:

Record samples from a stereo audio input pair
Configure each pad for stereo or mono recording with the option to synchronize the start and stop times to clock inputs
Trigger recording via audio level threshold
Create perfectly sized loops by setting the recording length
Enable immediate playback after recording for live looping capabilities
Make recordings up to 4 hours in length
Resample the master output without patching
Automate recording of a multi-sample bank via MIDI and CV
Store recorded samples as WAV files on the micro SD card then remove the card to transfer them to your computer

Sample Modes
Find creative ways of using your samples with our 5 sample playback modes:

Trigger one shots or launch loops using sample mode
Load a folder of samples into a sample mode pad to improve the quality of the pitch shifting when playing a sample chromatically or to trigger different samples with each note
Play time-synchronized loops with constant pitch time shifting in clip mode
Skip between slices of a WAV using slicer mode
Create rich textures and other worldly sounds with granular mode

Inputs and Outputs
Use the 8 inputs the way you want: assignments include a stereo audio input, up to 8 gate inputs, up to 8 CV inputs and 1 clock input.
Route the audio from each pad out to one of 3 stereo audio outputs or one of 6 mono audio outputs
Listen to all of the pad outputs combined on the master stereo output

External Control and Synchronization
Playback can be immediate or synchronized to internal clock, TRS clock in, or MIDI clock in and out
Confidently connect with both TRS MIDI Type A and Type B, no adapter needed
Play a single or multi-sample pad pitch shifted using MIDI notes or CV
Trigger different sample slices using MIDI notes or CV
Modulate a wide variety of sample parameters through the MIDI input and up to 8 CV signals
Quickly set up MIDI modulation using Learn mode - no need to look up CC numbers
Module Features
Use the 2? diagonal touch screen to intuitively explore the features of the module
Get more creative with double the processing power of the original bitbox
Refine your sound with reverb and delay
Import or export WAV files with your Mac or PC using a microSD card
Save and recall multiple presets
Increase your capacity with larger microSD cards
Inputs and outputs are DC coupled so you can record and play out CV signals
Read more
MRP:$517.55 SAVE 19%
 More than 10 in stock $418.46
Click for better price!
or call +44 20 7424 1960
quote 775080
Cat: 775085 Rel: 22 Jun 20
 
sampling module
Notes: Bitbox mk2 delivers powerful sampling and mangling for Eurorack. With this module you can add recording, sample playback, clip launching, slicing, granular sounds and musically intelligent looping capabilities to your Eurorack rig. With a 3.5 inch touchscreen, bitbox mk2 makes easy work of selecting, editing, and tweaking your samples. You can stream large samples of up to 4 GB file size straight from the microSD card. Interact with other musical components via CV and MIDI. Tweak your configurations to get them just right, then save them to multiple presets for future reuse. With the new bitbox mk2 hardware, you can now do more with the new more powerful processor.

Sample Playback
Play up to 24 polyphonic notes when your samples fit in the 64 MB of internal memory or up to 8 larger samples streaming directly from the microSD card
Configure 16 sample pads per preset as single or multi-samples, clips, slicers, granular or new recordings
Stream long samples from the microSD card with a max sample size of 4 GB, which can be many hours of audio
Trigger samples with the touch screen, CV gate inputs, or MIDI input
Use MIDI for polyphonic playback of samples or slices
Control how samples start and stop by choosing from one-shot, toggle, and gate launch modes
Tweak playback through a variety of sample parameters, including start position, length, pitch, gain, filter, loop mode, launch quantization, ADSR, Exclusive Grouping, clip synchronization, slice placement and sequencing, grain size, grain spread, grain count, and MIDI note and channel mapping

Record Eurorack level audio straight into the module:

Record samples from a stereo audio input pair
Configure each pad for stereo or mono recording with the option to synchronize the start and stop times to clock inputs
Trigger recording via audio level threshold
Create perfectly sized loops by setting the recording length
Enable immediate playback after recording for live looping capabilities
Make recordings up to 4 hours in length
Store recorded samples as WAV files on the micro SD card then remove the card to transfer them to your computer
Sample Modes
Find creative ways of using your samples with our 5 sample playback modes:

Trigger one shots or launch loops using sample mode
Load a folder of samples into a sample mode pad to improve the quality of the pitch shifting when playing a sample chromatically or to trigger different samples with each note
Play time-synchronized loops with constant pitch time shifting in clip mode
Skip between slices of a WAV using slicer mode
Create rich textures and other worldly sounds with granular mode
Inputs and Outputs
Connect up to 8 CV modulators to control numerous sample parameters
Trigger each of the 16 pads with a dedicated gate input
Record through the dedicated stereo audio input pair
Use CV to keep time through the dedicated clock input
Confidently connect with both TRS MIDI Type A and Type B, no adapter needed
Route the audio from each pad out to one of 2 stereo audio output pairs or any of the corresponding single channels
Inputs and outputs are DC coupled so you can record and play out CV signals

External Control and Synchronization
Playback can be immediate or synchronized to internal clock, TRS clock in, or MIDI clock in and out
Trigger each pad independently through a dedicated gate input
Use MIDI to trigger pads via a note per pad
Play a single or multi-sample pad pitch shifted using MIDI notes or CV
Trigger different sample slices using MIDI notes or CV
Modulate a wide variety of sample parameters through the MIDI input and up to 8 CV signals
Quickly set up MIDI modulation using Learn mode- no need to look up CC numbers
Module Features
Use the 3.5? diagonal touch screen to intuitively explore the features of the module
Get more creative with double the processing power of the original bitbox
Fill out your sound with reverb and delay
Import or export WAV files with your Mac or PC using a microSD card
Save and recall multiple presets
Increase your capacity with larger microSD cards
Select Flipped UI mode to mount the unit with the screen on the bottom and use the screen, knobs, buttons, and CV jacks as you normally would
Read more
MRP:$771.95 SAVE 17%
 9 in stock $639.82
Click for better price!
or call +44 20 7424 1960
quote 775085
Cat: 740064 Rel: 09 Aug 19
 
Dual oscillator Eurorack module with patented wave-slicing design - 26HP
Notes: Proper freaky digital Eurorack business. Based on the synth plugin of the same name, Waverazor is a bonkers aggro waveshaping oscillator. Ideal for filthy bass sounds and nasty leads.

Supplier notes:
The Waverazor Dual Oscillator is a result of a special collaboration between 1010music and MOK. It is the first hardware module to bring MOK's patented wave-slicing? oscillator design to Eurorack format. Waverazor's novel approach to synthesis splices waveforms into twisted and aggressive new timbres. Featuring fresh sound generation techniques like Multi-Sync and Mutant AM, the Waverazor oscillator is perfect for biting leads, glitched-out basses, cinematic drones and everything in between.

One Waverazor Eurorack oscillator can contain up to 8 wave slices, creating a multi-segment "Frankenstein" waveform that produces extended harmonic content beyond any single wave shape. Each individual slice has independent control over wave pitch, volume, phase and DC offset, allowing a single oscillator to contain a multitude of timbral colours. Even the "Razor" itself can be adjusted, with parameters for its own slice frequency, step size multiplier and duty cycle.

The Waverazor Dual Oscillator module provides a central waveform display that allows you to visualize the output. There's an audio input for slicing up any sound you like. Four endless knobs make it possible to morph multiple parameters at once, while the touch screen enables X/Y performance controllers that allow you to manipulate the sound with the swipe of your finger. Top it all off with 20 modulation CV inputs for complete sonic insanity!

What is included:

- Waverazor Dual Oscillator Eurorack module
- MicroSD card with Waverazor firmware and patch data loaded on it
- Eurorack power cable
- Waverazor Dual Oscillator Quick Start guide
- MIDI Adapter
Read more
 2 in stock $590.29
Click for better price!
or call +44 20 7424 1960
quote 740064
2hp
Cat: 727389 Rel: 02 Oct 19
 
Digital oscillator module with sub output & wavefolding - black
Notes: Sine is a harmonically pure VCO with two distinct outputs.

The primary output contains a perfect sine wave with a wide frequency range and pristine volt per octave tracking. The Sub output features two sine tones that can be blended together to achieve a mix of one octave below, or a fifth above the primary output's frequency.

In addition, both outputs have an internal wavefolder that adds harmonic content to the signal allowing for spectrally complex tones within a single module. Keep your tones pure (or not!) with Sine.
Read more
MRP:$170.85 SAVE 17%
 3 in stock $141.33
Click for better price!
or call +44 20 7424 1960
quote 727389
Cat: 752435 Rel: 25 Oct 19
 
Small passive expander for the Listen Four & Listen IO modules - 4HP
Notes: The Listen Up is a small passive expander for the Listen modules that provides stereo 1/4" (6.35mm) jack inputs and outputs. It connects to one or two Listen modules and/or WAV Recorder module with the included 3-pin cables. There are four 1/4" jacks arranged in left/right pairs. The left jack of each pair can be used as a TRS stereo jack if the right jack is unpatched.
Read more
MRP:$73.58
 2 in stock $70.67
Click for better price!
or call +44 20 7424 1960
quote 752435
Cat: 752443 Rel: 25 Oct 19
 
32HP metal enclosure for Eurorack modules - Beta version
Notes: Limited Beta version of the popular Pod32. These are new, fully tested and functional units. The only difference between the Pod32 Beta and the regular Pod32 is that the Beta version has fewer holes to screw in modules. Most common Eurorack sizes will fit from 4HP to 32HP, but some odd sizes and combinations won't fit. Please refer to the product image, or visit the 4ms website for possible module combinations.

Pods are a perfect way to get started in Eurorack module, or add a couple more modules to your monster system!

Made from 100% anodized aluminium, Pods are light, tough and perfect for on-the-go set ups. Mix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!
Read more
MRP:$28.68 SAVE 17%
 4 in stock $23.91
Cat: 752437 Rel: 25 Oct 19
 
25W Eurorack power supply
Notes: The Row Power 25 is a clean, regulated, and protected power supply module for Eurorack systems. It requires a barrel-style power brick (15V - 20V DC) and supplies power to modules via flying bus cables, direct connection, and/or bus boards.

The Row Power 25 provides 25W of power for any Eurorack modules (typically 4-10 modules*):

+12V @ 1.4A maximum, 1.0A recommended
-12V @ 0.8A maximum, 0.5A recommended
+5V @ 1.0A maximum, 0.8A recommended

*number of modules can vary depending on each module's power consumption.

Simply plug a universal power supply (laptop style) into either of the barrel plugs on the 4HP panel. Connect your modules via flying-bus cables or the Bus Stick.

Multiple Row Power modules can be powered from a single power brick by daisy-chaining with an inexpensive barrel cable. The Row Power 25 can also be daisy-chained to Pods. Each Row Power and Pod will be independently regulated and protected for ultra-low cross-talk between rows.
Read more
MRP:$113.49 SAVE 17%
 4 in stock $94.57
Click for better price!
or call +44 20 7424 1960
quote 752437
Cat: 739048 Rel: 29 Jul 19
 
Eurorack power supply module - 4HP
Notes: Row Power is a clean, regulated, and protected power solution for eurorack systems. Row Power 35 provides 35W of power, suited for any typical eurorack row (84HP to 168HP):

+12V @ 1.4A
-12V @ 1.25A
+5V @ 1.0A

Simply plug a universal power supply (laptop style) into either of the barrel plugs on the 4HP panel. Connect your modules via flying-bus cables or the Bus Stick.

Daisy-chain multiple Row Powers to use a single power brick for multiple rows (typically 3-5 rows per power brick). Each row will be independently regulated and protected for ultra-low cross-talk between rows. Rows can also be hot-swapped (plugged/unplugged without powering the whole system down).
Read more
MRP:$165.86 SAVE 24%
 2 in stock $126.79
Cat: 763098 Rel: 04 Feb 20
 
controlled noisillator module
Notes: Really clever noise-based oscillator from AJH. Drones, sweeps and bleeps aplenty, ranging from tamed to out-of-control filth. Also doubles up as a more conventional ring mod and distortion module.

Supplier's notes:
This 14HP wide module is a voltage controlled noise based oscillator, or noisillator for short. It generates 1/f noise and this is then sent through a feedback loop which allows the noise to be "tuned" to varying degrees depending on the settings of the frequency and resonance controls, or incoming frequency or resonance CV's. The tuned circuit can be FM modulated too, for some thunderous sweeping sounds. We have bright and dark outputs, which are pre and post filter respectively. The Bright output will always have a degree of noise present in the signal, whereas the Dark output can be tuned noise only when 4 pole resonance is selected. We also have an external Sync input, which will reset the resonant waveform, and we also have an Audio input, so that an external signal can be mixed into the resonant loop. Combinations of external waveforms to these two inputs can create some massive drone sounds, or sweeping sync sounds.

There is also an XOR ring modulator, which can be used as a module in its own right too. Lastly, we have an XOR amplifier, which is another independant circuit that can be used to add noise and distortion to any audio signal.
Read more
MRP:$293.07 SAVE 17%
! low stock $243.18
Click for better price!
or call +44 20 7424 1960
quote 763098
Cat: 755446 Rel: 07 Nov 19
 
Precision voltages module - dark edition
Notes: Sometimes real precision is required with pitch control voltages - this module features a super accurate "Cal" output, which is accurate to <1mV over 20V, translates to one cent over 20 octaves! It is ideal for calibrating the scaling of VCO's, indeed we have been using our own version of this circuit to calibrate our own MiniMod VCO's for the last three years.

As well as being a precision voltage source it is also a very accurate voltage adder, it has two channels (A & B) and both full volts (octaves) or 1/12th volt increments (notes) can be either added to or subtracted from the incoming signal. Perfect for adding a voltage offset to the output of a sequencer or it can be used to add switchable octaves to a VCO which only has course and fine tunes controls.

It also has a "mix" output, which allows either A channel on its own, or with the three way toggle switch channel B can either be added to, or subtracted from channel B, and this is in addition to the addition and subtraction per channel mentioned earlier.

Dimensions: 10HP wide, 26mm Deep
Read more
MRP:$261.89 SAVE 17%
 1 in stock $217.21
Click for better price!
or call +44 20 7424 1960
quote 755446
Cat: 757948 Rel: 09 Dec 19
 
Expander for the mmMIDI, adding 8 additional gate outputs
Notes: The 'mmT' is an optional 3HP expander which connects directly to the mmMidi. It maps a third MIDI channel's key presses to 8 trigger/gate outputs as shown on the mmT front panel.
Read more
 1 in stock $82.10
Click for better price!
or call +44 20 7424 1960
quote 757948
Cat: 733238 Rel: 18 Jul 19
 
Eight channel audio & CV sampler for Eurorack - 21HP
Notes: Our favourite module of 2019. Eight channels of audio and CV sampling with real-time editing and processing. Does basic sampling well but quickly gets creative and weird. We love it.

Supplier's notes:
The 'Squid Salmpler' is a Eurorack 8 channel audio & CV sampler. It is designed for immediate real time sampling, editing and mangling within a modular context.

Taking influence from early hardware samplers, The Squid Salmple focuses on usability and instinctive operation, incorporating a proven Pamela's Workout style user interface for minimal screen dependence and a fun, hands on experience.

With support for sampling and playback for both audio and CV, as well as CV control of all parameters, on-the-fly bank loading and saving to USB, The Squid Salmple brings a unique take on old school sampling into the modular realm.

The Squid Salmple comes with a USB Stick containing approximately 90 banks of original carefully curated royalty free samples. This includes a wide range of sounds from classic drum machines and weird synths to field recordings and CV modulations. Banks are provided by both ALM and some of our favourite artists and friends including Mumdance, Solid Blake, Russell Haswell, Lauren Flax, Dave Burraston (NYZ), Sue Zuki, Dungeon Acid, Sasha Lewis and Andrew Duff.
Read more
 More than 10 in stock $413.63
Click for better price!
or call +44 20 7424 1960
quote 733238
Cat: 777032 Rel: 26 Jun 20
 
filter module
Notes: Genuine EMS synthi filter, with redesigned faceplate!

This legendary filter can be switched between pre1974 and post 1974 filter type and response. For the first time response can be voltage controlled which was designed on the circuit board but not available on the matrix. This module is made under license from EMS. The only officially licensed remake of the EMS diode lowpass filter used in the VCS3 and AKS synths. It´s a faithful recreation of the original circuit, featuring some modifications that are also done on vintage EMS equipment, like a switchable faster CV response option for very quick modulations. Another switch determines if the filter has 18dB/oct slope as used by EMS pre-1974 or 24dB. The cutoff frequency and also the resonance are voltage controllable. Signal inputs and outputs have level controls.
Read more
MRP:$261.89 SAVE 16%
 1 in stock $219.28
Click for better price!
or call +44 20 7424 1960
quote 777032
Cat: 776867 Rel: 26 Jun 20
 
oscillator module
Notes: The RS-95N oscillator is a premium, british sounding VCO with waveshaping possiblities. It has a new front panel design with elongated holes.

It is based on the RS-90 but has more features, predominantly a very special sine wave.

The RS-95N presented here is technically identical but instead a normal frequency control it features a gorgeous, lockable potentiometer with ten turns. This allows precise fine tune control and adds the look of an EMS synthesiser to the VCO.

The module has three audio outputs: pulse, triangle and sine.

The upper shape control affects the pulse width. The lower shape control not only morphs from a falling sawtooth over triangle to a rising saw (or ramp) but simultaneously alters the sine wave and produces a kind of smoothed, softer sawtooth. Additionally the saw/sine output is a CV-INPUT for the symmetry of the sine. Very extraordinary feature that all are voltage controllable.

The oscillator sync is "soft" and not only reacts to square waves but works with all waveforms.

The frequency control has three switchable modes:

STD (standard) with a range of two octaves.
2 is two octaves lower than STD.
WIDE mode gives a range from 0.3 Hz - 17kHz and thus allows use of the RS-95 as VC-LFO with waveshaping options!
The "vary" control not only attenuates but also can amplify the pitch CV. It controls linearly from 0V over 1V/oct to 0.4 V/oct.
Read more
MRP:$311.78 SAVE 17%
 1 in stock $259.81
Cat: 760202 Rel: 10 Mar 20
 
distortion module
Notes: A legendary German band that influenced industrial music for years to come. A young drum virtuoso and breakout techno talent. A recording engineer to the likes of St. Vincent, Queens of the Stone Age and Ozzy Osbourne. A former Dire Straits and Paul McCartney drummer. A multifaceted producer and DJ who can play the most underground cuts to audiences of 35000 while producing for the likes of Lady Gaga and Frank Ocean. A hard techno legend known for smashing raves around the world with long, powerful live sets.

All of the above have offered praise for the Godeater pedal and consider it a pivotal part of their arsenal, with good reason. The extreme saturation of the low end guarantees a bass distortion like no other, making it no longer a necessity but a matter of aesthetic choice whether to dial the clean in or not.

Popular demand dictated that we release the Godeater in Eurorack format - after almost two years of research and development, it's finally in production. The delay gave us time to understand what people wanted from this module, and gave us the inputs we needed to make this one seriously special. This module offers CV control over almost every parameter without compromising on the signature sound that users of noisy things the world over have fallen in love with.
Read more
MRP:$291.82 SAVE 19%
 4 in stock $236.95
Click for better price!
or call +44 20 7424 1960
quote 760202
Cat: 779154 Rel: 10 Mar 20
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


A legendary German band that influenced industrial music for years to come. A young drum virtuoso and breakout techno talent. A recording engineer to the likes of St. Vincent, Queens of the Stone Age and Ozzy Osbourne. A former Dire Straits and Paul McCartney drummer. A multifaceted producer and DJ who can play the most underground cuts to audiences of 35000 while producing for the likes of Lady Gaga and Frank Ocean. A hard techno legend known for smashing raves around the world with long, powerful live sets.

All of the above have offered praise for the Godeater pedal and consider it a pivotal part of their arsenal, with good reason. The extreme saturation of the low end guarantees a bass distortion like no other, making it no longer a necessity but a matter of aesthetic choice whether to dial the clean in or not.

Popular demand dictated that we release the Godeater in Eurorack format - after almost two years of research and development, it's finally in production. The delay gave us time to understand what people wanted from this module, and gave us the inputs we needed to make this one seriously special. This module offers CV control over almost every parameter without compromising on the signature sound that users of noisy things the world over have fallen in love with.
Read more
 1 in stock $225.06
Cat: 777207 Rel: 10 Mar 20
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


A legendary German band that influenced industrial music for years to come. A young drum virtuoso and breakout techno talent. A recording engineer to the likes of St. Vincent, Queens of the Stone Age and Ozzy Osbourne. A former Dire Straits and Paul McCartney drummer. A multifaceted producer and DJ who can play the most underground cuts to audiences of 35000 while producing for the likes of Lady Gaga and Frank Ocean. A hard techno legend known for smashing raves around the world with long, powerful live sets.

All of the above have offered praise for the Godeater pedal and consider it a pivotal part of their arsenal, with good reason. The extreme saturation of the low end guarantees a bass distortion like no other, making it no longer a necessity but a matter of aesthetic choice whether to dial the clean in or not.

Popular demand dictated that we release the Godeater in Eurorack format - after almost two years of research and development, it's finally in production. The delay gave us time to understand what people wanted from this module, and gave us the inputs we needed to make this one seriously special. This module offers CV control over almost every parameter without compromising on the signature sound that users of noisy things the world over have fallen in love with.
Read more
 1 in stock $224.67
Cat: 749081 Rel: 25 Oct 19
 
Eurorack instrument interface with Neutrik combo connector - 8HP
Notes: Instrument Interface is a Eurorack pre-amp capable of bringing any type of audio signal to modular levels, thanks to its amplification circuit.

The module can drive regular and condenser microphones (+48V Phantom Powered), as well as Instrument and Line signals with a very low distortion ratio.

Going further from the regular re-amp operation, Instrument Interface offers some additional extra functions like a Trig/Gate extractor and Envelope Follower circuits, allowing you to use the character of your audio signal in more creative ways.
Read more
MRP:$273.11 SAVE 21%
 1 in stock $216.16
Click for better price!
or call +44 20 7424 1960
quote 749081
Cat: 749089 Rel: 24 Oct 19
 
Dual pre-amplifier module - 4HP
Notes: Inamp is a dual pre-amp in just 4 HPs. Featuring 6,3 Jacks inputs as well as Minijacks.

Both inputs are summed so you can use them at the same time as an input mixer.

The unit is designed to amplify up to x20 the input signal, allowing to amplify most of the music machines out there (Domestic line levels) as well as some guitars (Humbucker-like pickups and so).

The first channel is normalled to second one in series, so it's possible to have two stages of amplification or two separate ones.
Read more
MRP:$168.36 SAVE 36%
 3 in stock $108.09
Click for better price!
or call +44 20 7424 1960
quote 749089
Cat: 739915 Rel: 24 Oct 19
 
Full voltage-controlled instrument interface
Notes: Interesting MIDI option for Eurorack. Eight faders and buttons, mappable to MIDI note, CC and lots more parameters, then controllable using CV and gate signals. Versatile.

Supplier's notes:
A fully editable MIDI controller with eight faders and push buttons. Each of them with a CV or Gate input associated to automate their functioning via external signals or to be configured independently for further control.

Each control on VCMC can be edited on its OLED screen and will be output either via DIN-5 or USB as a class compliant MIDI device.

- Current needs: +12V: 64mA, -12V: 12mA
- Width: 20 HP
- Depth: 30 mm
- Aluminium, heat-treated front panel
Read more
MRP:$397.82 SAVE 21%
 2 in stock $313.86
Click for better price!
or call +44 20 7424 1960
quote 739915
Cat: 772856 Rel: 19 Jun 20
 
dual VCA module
Notes: This is the Behringer SYSTEM 100 130 DUAL VCA. An authentic reproduction of the original System 100M circuitry from the 80's that can fit in a standard Eurorack case- at a very affordable price. Mix the 130 DUAL VCA in with your existing rig or start your modular synth journey from here.

Each VCA in the 130 DUAL VCA comes equipped with three Sig In signal input jacks with their own gain controls. These inputs can accept audio signals via a 3.5 mm jack. The VCA's in the 130 also have a manual gain control, a low and high output as well as signal and clip indicators to keep an eye on your signal's levels. The low output can be connected to guitar amplifiers or mixers while the high output can connect to line level inputs in mixers or powered speakers. The outputs can be further modified to be linear or exponential via a switch located next to the gain knob.

The 130 DUAL VCA can also accept signals from other modules via the 3.5 mm Mod In jacks to shape the waveforms of the Sig In signals. These inputs have also have their own Mod In Knobs that control the amount of signal that goes through the Mod In jacks.

Installing the 130 DUAL VCA is designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 130 to be mixed with other synth modules for a truly unique set up.
Read more
 3 in stock $102.87
Click for better price!
or call +44 20 7424 1960
quote 772856
Behringer 902 VCA Module (eurorack module)
Cat: 772937 Rel: 19 Jun 20
 
VCA module
Notes: Enter the Behringer 902 VOLTAGE CONTROLLED AMPLIFIER. An authentic reproduction of the circuitry from the Modular 55, 35 and 15 series attenuators used by the world's most famous pop, rock and jazz musicians. Now you can build your very own, unique synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The 902 module features two signal inputs and two signal outputs that can be used to amplify two sources, either audio or control voltage, at the same time via a 3.5 mm connector. A rocker switch allows you to toggle between linear and logarithmic response modes while you can manually set the control voltage with the Fixed Control Voltage knob. Control inputs at the bottom of the module can accept control voltage signals from other modules to be change the amplification level.

Installing the 902 is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 902 to be mixed with other synth modules for a truly unique set up.
Read more
 6 in stock $55.07
Click for better price!
or call +44 20 7424 1960
quote 772937
Cat: 772780 Rel: 19 Jun 20
 
low pass filter module
Notes: Enter the Behringer 904A VOLTAGE CONTROLLED LOW PASS FILTER Module. A vintage-sounding authentic reproduction of the circuitry from the Modular 55, 35 & 15 Series from the 70s used by the world's most famous pop, rock and jazz musicians for their shows. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

FILTER Module. A vintage-sounding authentic reproduction of the circuitry from the Modular 55, 35 & 15 Series from the 70s used by the world's most famous pop, rock and jazz musicians for their shows. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The 904A VOLTAGE CONTROLLED LOW PASS FILTER features a cutoff frequency knob that lets you decide which frequencies to attenuate. The resulting frequency is determined by this knob giving you the ability to change your sound with one turn.

Three Control Inputs plus audio ins and outs are available to send the processed signal to other modules and to connect voltage signals from other modules to affect the cutoff frequency.

The 904A VOLTAGE CONTROLLED LOW PASS FILTER provides you control of the resulting frequency and internal feedback with the Fixed Control Voltage and the Regeneration knob. A switch also allows you to command the frequency range by letting you decide which frequency band you want to operate in. This gives you real-time access to all important parameters with one module.
Read more
 7 in stock $101.84
Click for better price!
or call +44 20 7424 1960
quote 772780
Cat: 772936 Rel: 19 Jun 20
 
envelope generator module
Notes: Enter the Behringer 911 Analog Envelope Generator. An authentic reproduction of the circuitry from the Modular 55, 35 and 15 series envelope generators used by the world's most famous pop, rock and jazz musicians. Now musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match with specific modules to customize your synth to complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The 911 Module allows you to create a deeply contoured signal with its 4 independent controls for Attack (T1), Decay (T2), Release (T3) and Sustain levels from 0 to +5 Volts. Create snappy and percussive sounds or long evolving drones perfect for a funky groove or a brooding soundtrack to your latest cyberpunk epic.

For a more flexible setup, the 911 features a trigger input where you can connect an external trigger system like a keyboard via a 3.5mm TS cable as well as an output to send the envelope to another module

Installing the 911 is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 911 to be mixed with other synth modules for a truly unique set up.
Read more
 8 in stock $49.87
Click for better price!
or call +44 20 7424 1960
quote 772936
Cat: 773000 Rel: 19 Jun 20
 
dual trigger delay module
Notes: Enter the Behringer 911A DUAL TRIGGER DELAY. An authentic reproduction of the circuitry from the Modular 55 series used by the world's most famous pop, rock and jazz musicians. Now you can build your very own, unique synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The 911A comes with two delay triggers with their own delay time controls ranging from 2 ms up to 10 seconds and their own 3.5 mm S-Trig ins and outs. Connect the 911A to the Behringer 911 ENVELOPE GENERATOR module and turn your Attack/Decay/Sustain/Release (ADSR) module into a Delay/Attack/Decay/Sustain/Release (DADSR) module. Rather than just playing the note when the signal is triggered, the 911A creates a nice volume swell effect, rising from 0 until the peak volume then going through the rest of the phases set in the envelope generator.

The delays in the 911A can be coupled in three different ways. In the Off setting, the delays are triggered separately via the trigger inputs. In Parallel mode, the trigger connected to the input at the top section will activate both delays at the same time. Switching the knob to Series will trigger the top section first then the lower section after.

Installing the 911A is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 911A to be mixed with other synth modules for a truly unique set up.
Read more
 More than 10 in stock $59.22
Click for better price!
or call +44 20 7424 1960
quote 773000
Cat: 772998 Rel: 19 Jun 20
 
oscillator driver module
Notes: Enter the Behringer 921A OSCILLATOR DRIVER. An authentic reproduction of the circuitry from the Modular 55 and 35 series oscillator drivers used by the world's most famous pop, rock and jazz musicians. Now you can build your very own, unique synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The 921A OSCILLATOR DRIVER module features a frequency knob that can adjust between either octave or semitone frequencies. The included rocker switch can be used to select between the two frequency types. The width of the rectangular wave is adjusted via a control knob that goes from 10% up to 90%. You can also connect any incoming control voltage or modulation signal into either of the 3.5 mm Frequency or Width inputs.

The 921A not only controls just one 921B Oscillator, but 12 of them- providing you with more flexibility and more nuanced waveforms.

Installing the 921A is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 921A to be mixed with other synth modules for a truly unique set up.
Read more
 8 in stock $81.05
Click for better price!
or call +44 20 7424 1960
quote 772998
Cat: 772888 Rel: 19 Jun 20
 
sequential switch module
Notes: Enter the Behringer 962 SEQUENTIAL SWITCH Module. An authentic reproduction of the discrete circuitry from the Modular 55 Series used by the world's most famous pop, rock and jazz musicians for their shows. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The 962 is used as a latch, shifter and signal selector. Depending on the number of input jacks plugged into the module, the 962 can alternate between two or three signal inputs. It can also be used to expand the Behringer 960 SEQUENTIAL CONTROLLER from an 8-step sequencer up to a 24-step sequencer.

The 962 SEQUENTIAL SWITCH features 3-channel V-Trig inputs for selecting CV input channels and separate V-Trig outputs per channel. Triggers from other modules can be connected via 3.5 mm cables and can be manually selected with the Trigger buttons.

The SIG IN jacks are what allow the 962 to alternate between inputs. Connect an input signal to input 1 or 2 and the 962 will alternate between these two inputs. If all three inputs are used, then the module will automatically alternate between the three stages.

Installing the 962 SEQUENTIAL SWITCH is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 962 SEQUENTIAL SWITCH to be mixed with other synth modules for a truly unique set up.
Read more
 9 in stock $49.87
Click for better price!
or call +44 20 7424 1960
quote 772888
Cat: 772814 Rel: 19 Jun 20
 
Control voltages module
Notes: Enter the Behringer 992 CONTROL VOLTAGES Module. An authentic reproduction of the circuitry from the Modular 55 & 35 Series used by the world's most famous pop, rock and jazz musicians. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The 992 CONTROL VOLTAGES features 4 channels for CV signals routing to the 904A LPF module. This allows your sound to be freely connected/disconnected with a flip of a switch. Putting the switch in its up position means that you are allowing your signals to connect to other modules and vice versa.

An external input is available If you have an additional input you want to connect to the 992 CONTROL VOLTAGES module. And with the inverting Attenuator knob, you can adjust the CV level of this signal by turning it clockwise to adjust the CV level from 0 to 10 or counterclockwise to change it from 0 to -10.

3 switched and summed CV inputs are present for the frequency control of VCF modules which can be connected via 3.5 mm TS cables. The 992 CONTROL VOLTAGES allows you to send out the combined voltage from all 4 inputs via 3 parallel CV outputs; which can drive multiple 904A LPF and 904B HPF modules for an unlimited number of sonic combinations.

Installing the 992 CONTROL VOLTAGES is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and mount the module using the included screws. This allows for the 992 CONTROL VOLTAGES to be mixed with other synth modules for a truly unique set up.

Read more
 9 in stock $47.80
Cat: 772992 Rel: 19 Jun 20
 
power supply module
Notes: Enter the Behringer CP1A Module. A high-performance, ultra-low noise power supply. Easy activation of this module is facilitated by a toggle switch. There are 3 LED Indicators available for each power rail as well as a DC Input. Its narrow design helps it seamlessly fit in your modular synth.

Installing the CP1A is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the CP1A to be mixed with other synth modules for a truly unique set up.
Read more
! low stock $47.80
Cat: 772818 Rel: 19 Jun 20
 
attenuators module
Notes: Enter the Behringer CP35 ATTENUATORS Module. An authentic reproduction of the circuitry from the Modular 55, 35 and 15 Series used by the world's most famous pop, rock and jazz musicians. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The CP35 features 4 passive attenuators with linked inputs and 4 separate outputs. Each attenuator knob can be used to adjust the level of the input signal passively from - 8 to unity gain. Connecting a single signal to the first input will allow it to pass to all 4 outputs to have up to 4 variations of a single signal source. Introducing a signal into the subsequent outputs will break the chain from the previous input. For example, if you have a signal in input 2, then this will feed into input 3 and 4 leaving input 1 to feed out of output 1. Having multiple inputs allows you to attenuate 4 separate signals and be more flexible with your tone.

Along with the standard outputs, the CP35 also features 6-volt outputs. These outputs give a reference voltage of -6 Volts out of one pair and +6 Volts out the other. Also included are two banks of 4-point multiple circuits for you to be able to route multiple copies of input signals to other modules. The CP35 can be a powerful addition to your synthesizer rig by allowing you to have multiple sources output to multiple modules so you can shape and sculpt sounds that are sure to blow everyone away!

Installing the CP35 is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the CP35 to be mixed with other synth modules for a truly unique set up.
Read more
 1 in stock $78.98
Click for better price!
or call +44 20 7424 1960
quote 772818
Cat: 772823 Rel: 19 Jun 20
 
oscillator controller module
Notes: Enter the Behringer CP3A-O OSCILLATOR CONTROLLER module. An authentic reproduction of the circuitry from the Modular 55 and 35 series mixers used by the world's most famous pop, rock and jazz musicians. Now musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The CP3A-O Module features 4 routing switches that enable you to send Control Voltages to one or more oscillators. Switches 1 to 3 are connected to Control Inputs 1, 2 and 3; switch 4 can be used to route an external Control Voltage signal via a 3.5 mm TS plug and can be controlled by an attenuator knob.

You can route up to three external control voltage signals to any of the three summed Control Inputs. Signals from these inputs can be combined by flipping any of the matching routing switches on. The parallel jacks at the bottom will route the final combined voltage signal to any module they're connected to. A great way to utilize the CP3A-O is to have it drive multiple 921A or B oscillator modules which can allow you to create more intricate patches and hours and hours of fun.

Installing the CP3A-O is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and mount the module using the included screws. This allows for the CP3A-O to be mixed with other synth modules for a truly unique set up.
Read more
 9 in stock $44.68
Cat: 774014 Rel: 13 May 20
 
VCF module
Notes: This product is an analog filter that processes -5v/+5v synth level audio signals. This particular product is using a 10 stage diode ladder circuit influenced from a classic Steiner filter.

Width: 10hp
Current: +16mA,-15mA

16 mA +12V
15 mA -12V
32 mm deep
Read more
MRP:$160.88 SAVE 17%
 2 in stock $134.06
Click for better price!
or call +44 20 7424 1960
quote 774014
Cat: 774002 Rel: 13 May 20
 
bass drum module
Notes: This module use the classic 'twin T' circuit to generate a sine wave for percussion and drum duties. This particular module has an additional accent circuit. The accent circuit allows for volume changes when two trigger sources are used. This module covers a good spectrum of possible classic drum sounds : 808, 909, Gabber, wood blocks, etc.

There is a boost circuit to push the sine wave into a square wave shape.

Control: Tune knob, Sweep (like a fine knob), Tone knob (muffled or pop sound), Decay knob, accent knob, and boost knob.

Jacks: Accent trigger input, Trigger input, and BD output.

Operation is straight forward. You patch a trigger signal into the trigger input and use the Out jack to hear the drum sound. The toggle switch allows for long 808 style drums, middle position for shorter drums, and toggle right for shorter stuff.

For default position sound exploring have the tune knob fully clockwise and sweep knob in the middle. Then use the fine knob to fine tune the pitch. If you require a lower range then turn the tune knob a bit counter clockwise, and use the Sweep knob to again fine tune.

When using the Accent circuit, you will hear better results when the accent knob is middle position. If the accent knob is fully clockwise the effect is less noticeable.

32mm deep.
Read more
MRP:$165.86 SAVE 17%
 1 in stock $138.22
Click for better price!
or call +44 20 7424 1960
quote 774002
Cat: 774006 Rel: 13 May 20
 
envelope generator module
Notes: Module: Accented Percussion Envelope Module (APE)

envelope generator, percussion, vca

Width: 6hp

Depth: 32mm , 1.26 inches clearance

Current: +19mA, -32mA

Circuits: Attack Decay Envelope Generator, and VCA's.

What does this module do?

This module allows you to add that dynamic 'accented' sound found in vintage gear like the Pearl SY-1 without having to build one of those kits, or hunt down the original. This module was influenced by such gear, but with modern parts. The goal was not to clone, but to get you really close results.

-There is a vca on the envelope output (DEPTH) with it's own CV Level input. This Dynamic Envelope has it's own output to give external vco's a 'pitch' ability. To do Disco 'POW' for example.



-There is another vca set up with CV Accent control just for the audio input.


If you patch up a sequencer, you can get very close results to the DFAM envelope portion.

*Gate or trigger input mode.

*3 modes for envelope time: Long, Perc (middle), and Short.
Read more
MRP:$110.99 SAVE 17%
 1 in stock $92.50
Click for better price!
or call +44 20 7424 1960
quote 774006
BLM Arcade Kick Module (synth module)
Cat: 774017 Rel: 13 May 20
 
kick module
Notes: This product is used to produce drum and percussion sounds. You can make 909 type of kick drums- the toggle switch on the left chooses between long and short vca decay. The toggle switch on the left chooses long and short pitch envelope decay. Smack knob control lefts you mix in a noise 'paper' sound for the drum.

You can mix in two trigger sources to create complex percussion patterns. The internal circuit is using logic 'OR' triggering.

This product was refined for optimum sound and response from the controls. Part values were changed from the original 909 design.

-There is onboard distortion to get techno type of kick drums.

-This internal oscillator is triangular core, with internal reset.

-The internal trigger conditioner can take audio rate frequencies.

-There is a manual push button.

Width: 10hp

Current: +30mA,-24mA
Read more
MRP:$195.79 SAVE 17%
 1 in stock $163.16
Click for better price!
or call +44 20 7424 1960
quote 774017
Cat: 773978 Rel: 13 May 20
 
quantizer module
Notes: Quick and easy dual quantiser module from Blue Lantern. Two identical quantiser circuits, each offering a range of 16 scale options, adjustable independently.

Supplier notes:
This is a quantizer based on the Michael Barton simple quantizer firmware PIC. There are two identical circuits found on this module. You can select two modes using the toggle switch. The 'Stand' mode is the standard mode which includes the follow scales:

STANDARD BANK

1.Bypass - Inputted voltage is outputted

2.Major - Root, 2nd, 3rd, 4th, 5th, 6th, 7th

3.Minor - Root, 2nd, flat 3rd, 4th, 5th, flat 6th, flat 7th

4.Major Pentatonic - Root, 2nd, 3rd, 5th, 6th

5.Minor Pentatonic - Root, flat 3rd, 4th, 5th, flat 7th

6.Blues Scale Root, flat 3rd, 4th, flat 5th, 5th, flat 7th

7.Whole Tone - Root, 2nd, 3rd, flat 5th, flat 6th, flat 7th

8.Chromatic - All 12 notes



The 'OCT' mode is the Octave BANK, which includes the following:

OCTAVE BANK

1.Bypass - Inputted voltage is outputted

2.Octave - Root

3.Octave and Fifth - Root, 5th

4.Octave and Flat Fifth - Root, flat 5th

5.Major Arppegio - Root, 3rd, 5th

6.Minor Arppegio - Root, flat 3rd, 5th

7.Dominant Arppegio - Root, 3rd, 5th, flat 7th

8.Chromatic

You use the knobs to select the different scales.
Read more
MRP:$130.95 SAVE 17%
 2 in stock $109.12
Click for better price!
or call +44 20 7424 1960
quote 773978
Cat: 775739 Rel: 13 May 20
 
clock divider module
Notes: This has 4 musical divided sections: divide by /2, /4, /8, /16. Then each section has a phased output where you can delay a trigger event for example.
So this is designed around the falling edge of the inputted clock source (wave), the so called 'musical' division.
On the far right, to fill the space I included a powered multiple so that you could repeat a signal. The multiple does not have any output resistor, so what you patch in is going to output an exact copy (important for pitch processing).

You use the module to breakdown a clock source, for example an LFO or VCO, into subdivisions for triggering events. All the divided outputs are simultaneous, so you can patch to drum modules, high hats, sequencers, etc., at the same time.

The module will except just about any wave: saw, sine, triangle, square, ramp wave. Each one will influence the processing a little different as far as time is concerned. You can also use the outputs at audio rate, to use as a subharmonic generator.
(1) Master Clock Divider circuit, (1) op-amp powered multiple, (1) Clock input pass through and Reset pass through.
Read more
MRP:$180.83 SAVE 22%
 1 in stock $141.33
Click for better price!
or call +44 20 7424 1960
quote 775739
Cat: 775759 Rel: 27 May 20
 
synth module
Notes: The module has two filters, and two OTA-based VCAs. Most of the controls are setup to control both filters with one set of parameter knobs. There is a spread knob that separates the resonance peaks between both filters. You can get cool vocal and nasal filtering with careful adjustment. The filters self resonate. There is a trimmer for each filter which allows you to adjust how much feedback you want.

There is a CMOS based logic control system to select the state variable outputs. DG412 modern analog switch is used internally. This analog switch is made for audio (-5v / +5). There is a 'reset' button to quickly go back to LP flavor.
Read more
MRP:$342.95 SAVE 22%
 1 in stock $268.13
Click for better price!
or call +44 20 7424 1960
quote 775759
Cat: 783142 Rel: 13 May 20
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Excellent stereo/dual mono delay module. CV inputs allow you to control the delay times independently, allowing for some creative modulation effects.

Supplier notes:
This module has two echo delay effect circuits based on the Dwarf Star Semi Modular system. With this module you can add cool delay fx to synth level signals. Each of the parameters has CV control with their own attenuators. There are three parameters per channel. The two echo fx circuits are mirrored on the front panel: Channel A and Channel B.

The fx processing was fine tuned for clean fx processing. You can however patch a cv input into the 'REPEAT' parameter, have the RCV attenuator fully clockwise, and force it to feedback into loud trash. There is no switch jack on the input jacks. However, all the CV jacks have switch jack internal connections. This allows you to modulated both channels using only the the Channel A side. For true independent patching on each separate channel simple patch something into the corresponding Channel B jack.

The Kill toggle switches kill the dry signal input going into the pt2399 fx chip. It will however allow echo trails to keep going until they die out. So this is not just a mute switch to abruptly cut the echo trails in halfm which is potentaially better for live manipulation and recording.

The module also features onboard head phone monitoring. You can also use a JBL portable speaker or any other charger type portable speaker to hear your modular using a 3.5mm stereo cable. There is also a new spread parameter and fx bypass push button for live use.

width: 18hp
current: 10mA, -6mA
depth: 1.5 inches
FX Chip: PT2399.
Signal Levels for In/Outs: modular synth levels -5/+5.
Read more
 1 in stock $171.53
Cat: 783152 Rel: 13 May 20
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Excellent stereo/dual mono delay module. CV inputs allow you to control the delay times independently, allowing for some creative modulation effects.

Supplier notes:
This module has two echo delay effect circuits based on the Dwarf Star Semi Modular system. With this module you can add cool delay fx to synth level signals. Each of the parameters has CV control with their own attenuators. There are three parameters per channel. The two echo fx circuits are mirrored on the front panel: Channel A and Channel B.

The fx processing was fine tuned for clean fx processing. You can however patch a cv input into the 'REPEAT' parameter, have the RCV attenuator fully clockwise, and force it to feedback into loud trash. There is no switch jack on the input jacks. However, all the CV jacks have switch jack internal connections. This allows you to modulated both channels using only the the Channel A side. For true independent patching on each separate channel simple patch something into the corresponding Channel B jack.

The Kill toggle switches kill the dry signal input going into the pt2399 fx chip. It will however allow echo trails to keep going until they die out. So this is not just a mute switch to abruptly cut the echo trails in halfm which is potentaially better for live manipulation and recording.

The module also features onboard head phone monitoring. You can also use a JBL portable speaker or any other charger type portable speaker to hear your modular using a 3.5mm stereo cable. There is also a new spread parameter and fx bypass push button for live use.

width: 18hp
current: 10mA, -6mA
depth: 1.5 inches
FX Chip: PT2399.
Signal Levels for In/Outs: modular synth levels -5/+5.
Read more
 1 in stock $171.53
BLM Europa VCO Module (synth module)
Cat: 775763 Rel: 13 May 20
 
VCO module
Notes: Alan R. Pearlman inspired system. Part of the BLM7200

The system only mimics the collection of sections from the 2600 to make a complete instrument.

(Discrete Tri Core) sine, ramp, square, triangle waves
Read more
MRP:$298.06 SAVE 21%
 1 in stock $235.91
Click for better price!
or call +44 20 7424 1960
quote 775763
Cat: 775744 Rel: 13 May 20
 
joystick module
Notes: This is a nice small joystick to add some control to your modular. The joystick is acting as an attenue-inverter. At center position is zero. Swinging the joystick side to side gives + or -. There are two attenue-inverters, one for each axis. When nothing is patched into the 'input' jack, the joystick is using an internal reference voltage (7v). You can use that to control a fitler module for example.When you patch a vco or lfo into the input jack you can add some fm to another external vco and have control over the FM with the Joystick.The joystick also has a push button. The gate out jack allow you to trigger your other modules that don't have manual trigger control.
Read more
MRP:$210.76 SAVE 22%
 1 in stock $165.24
Click for better price!
or call +44 20 7424 1960
quote 775744
BLM Hermippe VCF Module (synth module)
Cat: 773986 Rel: 13 May 20
 
analogue filter module
Notes: This is an analog filter with a lot of low end. The design uses a JRC 13700 OTA dual vca chip to produce 12db Low pass and 12db high pass filtering. The module can easily self oscillate. There is a trimmer to adjust how much sine wave you want. There is a 2 channel internal mixer, so that you can patch two sound sources. There is a bi polar FM input, and a 'MOD' input with level control. These are used to voltage control the Cutoff knob.

The 'ping' input is a unique trigger conditioner that will send a spike to the filter. This is used to produce percussion type sounds from the output. This is used in combination with the Rez knob. The cutoff knob determines the sine wave frequency.
Read more
MRP:$135.93 SAVE 17%
 2 in stock $113.27
Click for better price!
or call +44 20 7424 1960
quote 773986
Cat: 773976 Rel: 13 May 20
 
ADSR module
Notes: A Simple Envelope Generator that produces an Attack, Decay, Sustain, and Release voltage output. This product only produces voltage. You will need an external VCA module for you to complete the common Envelope + Amplifier Patch. This module can also be used to modulate for example a vco. This is a digital product. There is positive CV control for the output,amplitude level of the envelope.
Read more
MRP:$106.00 SAVE 17%
 1 in stock $88.33
Click for better price!
or call +44 20 7424 1960
quote 773976
Cat: 774000 Rel: 13 May 20
 
VCO module
Notes: Typically excellent stuff from Blue Lantern Modules. Proper versatile VCO that also goes slow enough to handle LFO duties, with a wealth of FM, sync and modulation options plus sub-osc output.

Supplier's notes:
This product produces continuous wave forms that can be used as an LFO or audio rate VCO. There are 11 possible wave form outputs. This is a discrete, triangle core design based on the Bergfotron 'Advanced' VCO. This particular version uses a VCA based exponential converter for the core 1v per octave converter.

11 Wave Form Outputs: Ramp, Double Saw x2 Frequency, Sine with Level Out, Triangle, Saw, Even Harmonic, Pulse with PWM, Falling Stairs, Folded Triangloid, Pulse Train, Sub Generated Pulse Output (Divider)

Model: BLM Lunar Modulation Lab VCO
Analog Oscillator, LFO,VCO
Width: 18hp
Current: +91mA,-61mA


Read more
MRP:$385.35 SAVE 17%
 2 in stock $321.13
Click for better price!
or call +44 20 7424 1960
quote 774000
Cat: 774004 Rel: 13 May 20
 
metallic generator module
Notes: Freshly updated to a more user-friendly and versatile MK2 form, this percussion module was always a great value and now even better. MK2 introduces layout changes, FM and easier tuning.

Supplier's notes:
There are 3 square wave oscillators that ring mod each other twice to produce 'shimmery' sounding tones or drones. The internal sound does not stop. When you patch from the 'drone' jack it is a constant sound. You use the A, B, and C knobs to tune each individual oscillator. Then you use the 'Tune' Knob to adjust all of the oscillators when you find that perfect sound. There is a TR influenced circuit that uses the abrupt dirty transistor vca to produce hi-hats or metallic percussion. I added the essential accent control to vary the amplitude. You need a gate or trigger signal from an lfo, etc, to activate the TR VCA portion of the module.

Otherwise if you want clean hi-fi sounding percussion from this unit, you patch from the 'Drone' jack to your hi quality ssm2164, or cool audio v2164 vca.

Model: Mini Shimmery Module MK2
Percussive Metallic Generator
Depth: 2.5 inches
Width: 10hp
Current: TBA
Colors: Matt Black
Read more
MRP:$148.40 SAVE 17%
 5 in stock $123.67
Click for better price!
or call +44 20 7424 1960
quote 774004
Cat: 775747 Rel: 13 May 20
 
mixer module
Notes: Alan R. Pearlman inspired system- part of the BLM7200
The system only mimics the collection of sections from the 2600 to make a complete instrument.

Audio Mixer, Noise Generator, Sample and Hold, Ring Mod (633 chip)

32 mm deep
Read more
MRP:$180.83 SAVE 22%
 1 in stock $141.33
Click for better price!
or call +44 20 7424 1960
quote 775747
Cat: 773981 Rel: 13 May 20
 
LFO module
Notes: This module contains about 5 modules in one. You get a lot of features. This is using a Phase Lock Loop based internal patch to create the oscillation (LFO). I then give you access to the clock divider used in the Phase Lock process.

This LFO can go audio rate or really slow using the toggle switch to decide LFO/HFO mode. There is an internal CV switch for you to select from 6 wave forms. The special wave form is the step generated wave. It sounds like a quantized ramp wave, and moves at half the overall internal lfo rate. There is a nice Level out knob to control the LFO wave output. This LFO has very HARD sync, that will reset the LFO.

The other half of this module contains a clock divider that also uses a CV selectable output. The clock divider can also go audio rate and sound like a sub harmonic generator when in audio rate. At very high frequencies (FREQ knob fully clockwise), the clock divider will lock up, this is due to the cmos chip.

The clock divider can be used with internal clock or external clock.

This is a fun performance type of lfo with just about all the features an LFO should have. There is 1v/ octave tracking of about 4 octaves when used as an oscillator. This product is for most part more of an LFO. The best patch one can do with this product is a 'cross' patch from the Phobos Lunar LFO, and have it patched to your Oscillator module. Then patch your oscillator to the CV waveform select on the Phobos.
Read more
MRP:$235.70 SAVE 17%
 1 in stock $196.42
Click for better price!
or call +44 20 7424 1960
quote 773981
BLM Simple VCLFO Module (synth module)
Cat: 775771 Rel: 13 May 20
 
LFO module
Notes: This is another analog lfo made specifically for those who may be on a really tight budget- this particular module is good for modulating your filter module or VCO module.
Read more
MRP:$106.00 SAVE 21%
 1 in stock $84.18
Click for better price!
or call +44 20 7424 1960
quote 775771
BLM Slim TPC VCO Module (synth module)
Cat: 773995 Rel: 13 May 20
 
VCO module
Notes: This is an analog vco based on the Bergfotron Advanced VCO. It has heavy modification compared to other buchla vco's. It will track much better then the competition. Why? because this is using a VCA based tracking system instead of the matched transistor system. The 'Lock' switch allows for setting up your favorite reference Frequency. For example you can set it up on Zero Volts equals low Note 'C'.

You use this as a sound source.
You use this as a precision LFO.
You get a bonus analog sample and hold.

There are two possible sound source outputs:
-Wave Out. This has 8 possible wave shapes: Triangle, Saw, Double Saw, Pulse Width, Sine, Ramp, Even Harmonics, and Double Pusle wave. All of this is selected by push button. The selector circuit is using a Precision DG412 IC chip, so there is absolutely no bleeding. There is of coarse CV input for the selector (by Triggering).
All 8 waves are roughly -5/+5

-(Positive) Static Square Wave Out. This is a great clock source, it is also a great sync source for other products.

The analog sample and hold is using the internal VCO as the 'clock'. You simply patch a sound source on the 'input' and use the output to monitor the result. The (red knob) Tune knob above is used to control the S&H rate.

This product is the evolution of the 'Transistor Pyramid Core' saga.

WIDTH: 12HP
CURRENT: TBA
DEPTH: 1.5" Clearance, 1.3" min.

Two Stacker PCB manufacturing method.
1. Control PCB
2. CORE vco PCB
Read more
MRP:$342.95 SAVE 17%
 1 in stock $285.80
Click for better price!
or call +44 20 7424 1960
quote 773995
Artikel 1 bis 50 von 235 auf Seite 1 von 5 anzeigen
1  2  3  4  5  »

Filter

Synth modules
DJ-Ausrüstung
Release Date
Close