100% Sicheres Einkaufen

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Sicheres Einkaufen

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Synth modules

Startseite  Equipment  

Synth modules

Options
Artikel 1 bis 11 von 11 auf Seite 1 von 1 anzeigen
Subscribe to our weekly Studio Equipment emails
Erica Synths Black VCO 2 Anlogue VCO With Built In Waveshaper & LFOs Black Series Module
Cat: 799541 Rel: 23 Nov 20
 
LFO/oscillator/waveshaper synth module
Notes: Erica Synths Black VCO2 is an analogue VCO with built in SAW waveshaper and two modulation LFOs.

Erica Synths Black VCO2 is all analogue, highly accurate and stable VCO with four simultaneous waveform outputs, one octave down suboscillator and some unique features. Unlike harsh, logic divider based sub-oscillators, Black VCO2 transistor-based suboscillator generates distinct, rounded squarewave. Furthermore, the Black VCO2 has built in SAW waveshaper and two modulation LFOs. Together with Black VCO Expander - waveform mixer you get massive analogue sound source with plenty of patch points for modular use.

Erica Black Series include high-end, unique functionality and superior quality modules. Only the best, highest quality components are used, all inputs and outputs are protected against undesired over-voltage. Erica Black Series consist of range of modules that are needed to put together entire synth.

Technical specifications:

Audio output amplitude: 10Vptp
Octave range: C0 - C8
Panel width: 12HP
Module depth: 35mm
Power consumption: 71mA@+12V, 62mA@-12V
Power consumption with Expander: 102mA@+12V, 87mA@-12V
Read more
MRP:$330.09 SAVE 22%
 2 in stock $255.97
Hungry Robot Output Module Desktop Module
Cat: 780994 Rel: 23 Nov 20
 
Output module
Notes: The Hungry Robot Output Module allows users to interface your modular system with headphones, speakers, and recording interfaces. It uses a high quality amplifier circuit to boost the signal to the level you need. It accepts both mono and stereo signals. Plug in you inputs and output however you need, internal switching will automatically route the signal to where it needs to be based on what you have plugged in. As with all Hungry Robot "Modular Boxes" the Output Module can be powered with a simple 9V DC, Negative Center power supply.

KNOB
-VOLUME: Controls the overall volume of the output. Adjust to taste.

PATCH POINTS
-IN(L/MONO): Left input. Use this if you are running mono and want it split into stereo.
-IN(R): Right Input
-OUT(L/STEREO): Left output. Use this for stereo situations (TRS/Headphones)
-OUT(R): Right Output

Dimensions: 4.7" x 2.6" x 1.5"
Power: 9V DC - Negative Center - 2.1mm Barrel
Read more
MRP:$126.65 SAVE 17%
 2 in stock $105.53
Click for better price!
or call +44 20 7424 1960
quote 780994
MGR Synthesizer 3320 LPF 24dB Resonant Low Pass Compact Filter Module
Cat: 798347 Rel: 25 Nov 20
 
Low pass compact filter module
Notes: The MRG 3320 LPF is a low pass voltage controlled filter based on the AS3320 (clone of the CEM3320).

This is a compact, but powerful and high quality 24dB 4 poles resonant low pass filter.

It is a clean, low noise filter, but can reach some screamy qualities when resonance is turned to the maximum.

All parameters are both voltage and knob controlled.

The panel is a 1.6mm FR4 PCB, matte black.

Lead-free PCBs, components and solder.

Technical Details:
Width: 4HP (2cm).
Depth: 4cm (can be used in skiffs).

Audio Signals
INPUT: Input Audio Signal.
OUTPUT: Output Filtered Signal.

Control Signals
CUTOFF: CV for filter cutoff modulation.
PEAK: CV for filter peak modulation.

Controls
C: Cutoff base frequency.
P: Peak base amount.

CM: Attenuator for the CUTOFF input.
PM: Attenuator for the PEAK input.
Read more
MRP:$101.05 SAVE 17%
 2 in stock $84.19
Modbap Modular Per4mer Quad Performance Effects Eurorack Module
Modbap Modular Per4mer Quad Performance Effects Eurorack Module (effect/delay/digital/quad/reverb/dual & stereo/dynamics/sampling synth module)
Cat: 795892 Rel: 23 Nov 20
 
Quad performance effects module
Notes: Unique hands-on performance effects module inspired by DJ gear, featuring colour processing, compression, reverb, glitch and much more besides. Great sound and lots of CV options.

Supplier's Notes:
Per4mer is a 14hp eurorack formatted quad performance effects unit. Inspired by time-honored DJ effects processing boxes, Per4mer allows for a hands-on and CV / Gate controlled eurorack effects performance interaction. Whether momentarily engaging or latching FX, Per4mer offers an unrivaled and fun experience.

The basic principle of Per4mer is to feed in an audio input and to trigger on-the-fly effects, bringing DJ style live improvisation to a modular environment. Effects can be triggered simultaneously or individually where an inspiring effect palette combines to generate unique creative beats and melodies.

Per4mer includes 4 performance effects (Delay, Reverb, Glitch, Tape Stop) and 2 processing effects (Color processor & Compressor). Each of the 4 performance effects has its own set of 4 parameters controlled by the 4 knobs or CV inputs. Effects can be used simultaneously or individually allowing for a vast variety of creative effects combinations.

The Color processor allows for engaging any of the 4 coloration presets - Classic (12bit), LoFi (8 Bit), Saturation, and Wax. Combine any one of these color presets with the onboard Compressor and Side-Chain input to instantly transform any audio signal's mood and vibe.

Engaging the Reverb along with the "12-bit classic" color option gives an incredibly lush lo-fi reverb sound while disengaging the color option allows the reverb to remain just as beautifully lush and hi-fi. The potential is nearly limitless.

Per4mer's 'Glitch' effect is inspired by classic beat repeat and looper effects offering 4 controls - Wet/Dry (sound on sound), Loop size, Pitch, and reverse. Conversely, the Tape Stop effect allows for the perfect punctuation of any audio signal.

Width: 14HP
Depth: 25mm
Power: +12V: 50mA, -12V: 0mA
Read more
MRP:$482.33 SAVE 17%
 1 in stock $401.94
Click for better price!
or call +44 20 7424 1960
quote 795892
MRG ADSR Compact Envelope Generator Module
MRG ADSR Compact Envelope Generator Module (envelope generator synth module)
Cat: 798361 Rel: 25 Nov 20
 
Compact ADSR envelope generator module
Notes: Simple, compact envelope generator at a nice price. Capable of ultra-fast envelopes as well as long, slow slopes with attack up to five seconds and decay/release up to eight seconds each.

Supplier's Notes:
This is a classic envelope generator, based on AS3310, a clone of the CEM3310. Features a separate trigger input, normal and inverse envelope output, high quality components and careful engineering.

When the TRIGGER input is unconnected, rising and falling edges of the GATE input will trigger a classic ADSR envelope.

If the TRIGGER input is connected, a high GATE level will bring the output to SUSTAIN level, and the GATE falling edge will start the release phase. A TRIGGER input when GATE is high will start an attack/decay cycle. Attack, Decay and Release times vary exponentially with the control knob. For each of these parameters, the ratio between the longest possible time and the shortest is slightly more than 3000:1.

The panel is a 1.6mm FR4 PCB, matte black.

Lead-free PCBs, components and solder.

This is the second version of the MRG ADSR. The previous one is sold out. Although the module has been completely redesigned, the only visible change from the previous module is the knob orientation.

Technical details
Width: 4HP (2cm).
Depth: 4cm (can be used in skiffs).

Attack time range: 1.75msec to 5s.
Decay time range: 2.4msec to 8s.
Release time range: 2.4msec to 8s.

Attack level: 5 V
Sustain level:0 to 5V
Inverse envelope: 0 to -5V
Read more
 4 in stock $84.19
Click for better price!
or call +44 20 7424 1960
quote 798361
MRG Synthesizer 3340 VCO Precision Compact VCO Module
Cat: 798345 Rel: 25 Nov 20
 
Precision compavtr VCO synth module
Notes: The MRG 3340 VCO is an oscillator based on the AS3340 (clone of the CEM3340).

Quality components, polypropylene timing capacitor, and precise tuning make this a small, simple, but high quality oscillator.

1V/Oct CV stable over more than 6 octaves, precise waves, PWM and SYNC input.

Output waves are square and sawtooth.

When no PWM input is present, the square wave has a duty cycle of 50% - this is actually configurable by an internal trimmer.

The panel is a 1.6mm FR4 PCB, matte black.

11 mA +12V
13 mA -12V
0 mA 5V
40 mm deep

Technical Details:
Width: 4HP (2cm).
Depth: 4cm (can be used in skiffs).

Frequency range: 16Hz-24kHz
Sawtooth output: +5V/-5V
Square output: +5/-5V

Inputs
CV: 1V/Oct CV input.
MOD: Exponential FM input.
SYNC: Hard Sync.
PWM: Pulse-Width Modulation Input.

Controls
M: Attenuator for the MOD input.
C: Coarse base frequency.
F: Fine base frequency.

Outputs
SAW OUT: Sawtooth output.
SQUARE OUT: Square/Pulse output.
Read more
MRP:$101.05 SAVE 17%
 2 in stock $84.19
MRG Synthesizer 3360 VCA Dual Linear Compact VCA Module
Cat: 798351 Rel: 25 Nov 20
 
Dual linear compact VCA module
Notes: This is a Dual Linear Low Noise VCA module, based on the AS3360.

Both VCAs can be controlled by a CV entry, modulated by control knob.

VCA1 also has an initial gain control (B1), that offsets the CV input by a constant value. This allows VCA1 to be left always open, with the initial gain controlling the amplification.

If both input jacks are used (IN1, IN2), the two VCAs will operate independently. The output of VCA1 will go to OUT1, the output of VCA2 will go to OUT2.

If there's no jack in IN2, the two VCAs will be cascaded, and the output of VCA1 will go both to OUT1 and as an input to VCA2.

This allows this module to be used to process both the MIDI Velocity and the envelope of an audio signal.

Inputs:

IN1: Input Signal for VCA1.
CV1: Control Voltage for VCA1's amplification.
IN2: Input Signal for VCA2. If no IN2 is present, the input of VCA2 will be the output of VCA1.
CV2: Control Voltage for VCA2's amplification.
Outputs:

OUT1: Output of VCA1
OUT2: Output of VCA2
Controls:

M1: Attenuator for CV1
B1: Initial gain of VCA1
M2: Attuenator for CV2

40 mm deep
Read more
MRP:$101.05 SAVE 17%
 2 in stock $84.19
MRG Synthesizer ATT Compact Passive Triple Attenuator Module
Cat: 798358 Rel: 25 Nov 20
 
Passive triple attenuator synth module
Notes: Triple Passive Attenuator Module for Eurorack Modular Synthesizers.

This is a simple module that allows to attenuate three signals independently.

A simple but very useful modules that it's always handy to have in a rack.

It is passive, thus requires no external power.
Read more
MRP:$43.11 SAVE 17%
 4 in stock $35.92
MRG Synthesizer MULTI Compact Passive Multiple 4x2 or 2x4 Module
Cat: 798355 Rel: 25 Nov 20
 
Compact passive synth module
Notes: This is a simple module that allows to duplicate signals. Each column can be used either as a dual 1x2 multiple, or as a 1x4 multiplier, depending on the presence of a jack in slots 3 and 4.

Really simple, but incredibly useful.

This module is passive, i.e. requires no external power.
Read more
MRP:$33.68 SAVE 17%
 4 in stock $28.06
Noise Engineering Fractio Solum Clock Divider & Multiplier Module (silver faceplate)
Cat: 801247 Rel: 24 Nov 20
 
Clock divider & multiplier synth module
Notes: Fractio Solum is a simple and easy-to-use clock divider/multiplier. Patch a clock in, dial in a fraction, and you're off! CV over ratio opens up an extra level of clocking and sequencing power. FS is loaded with features, including a reset input to keep you on the 1, x2 and /2 outs that further divide and multiply the selected ratio for even more variation, a mute feature for breaks and drops, and a BOC output that sends a trigger each time the division starts a cycle. Flip the mode switch to use FS as a divider/multiplier, to use the more common rhythms based on 2 and 3, or go wild with any division between 1/10 and 10/1.

Size and power:

4 HP

+12v: 50mA

-12v: 14mA

+5v: 0mA

Fractio -- from latin: "fraction"

Solum -- from latin: "foundation"

"Foundation of fractions"
Read more
MRP:$180.54
 1 in stock $166.16
Click for better price!
or call +44 20 7424 1960
quote 801247
Rossum Electro-Music Mob Of Emus Polyfunctional Harmonic Sextet Module
Cat: 797062 Rel: 25 Nov 20
 
Polyfunctional harmonic sextet module
Notes: A lot to unpack here. Six-channel multipurpose oscillator/noise source/modulation generator with quantisation, trigger generators and even more. Seriously powerful all-round digital goodness.

Supplier's Notes:
Mob of Emus is a powerful music and sound design tool that packs an enormous amount of creative power into an amazingly compact 16HP module.

Mob of Emus gives you six channels of oscillators, noise sources, cyclical and 1-shot modulators (including LFOs, envelopes, and various other shapes), sample and hold waveshapes, slow random modulators, triggers, rhythm patterns, and quantization (of both internal and external signals) in pretty much any combination (well, any combination of six channels, anyway).

In addition to being able to independently program the function of each individual channel, Mob of Emus' Hex Mode provides a macro control layer that allows you to control all of its channels simultaneously (while maintaining the relationships of each channel's independent programming).

What's more, Mob of Emus' "harmonic" control structure makes it extremely easy to combine its oscillators into rich additive timbres, to combine its LFOs into stacked harmonic low frequency modulation waves, and to create modulation sources and triggers with intricate polyrhythmic patterns.

With an external trigger input, six CV inputs that can operate in six different control modes, six independent outputs, and an assignable mix output, Mob of Emus can operate as the heart of an almost unlimited variety of patches. And its 8 real-time controls will give you immediate hands-on access to a channel's (or all six channels') key parameters, inviting (and rewarding) exploration and improvisation.

Mob of Emus features include:

Six channels that can function independently or can be further controlled by a Hex Mode macro layer that lets you control all six simultaneously. Channels can be:
Wide-range digital oscillators
Noise sources
Cyclical and 1-shot modulators (including LFOs, envelopes, and various other shapes)
Sample and hold waveshapes
Slow random modulators
Triggers
Rhythm patterns
Quantizers (of both internal and external(!) signals)
Six CV inputs that can function in six different control modes
Eight real-time controls for immediate access to key channel parameters
Six individual channel outputs and an assignable mix output
The ability to store and recall 12 user presets
And much more.

Mob of Emus is 16HP wide and 25mm deep.

Power requirements (max): 130mA +12V, 25mA -12V. Reverse polarity protected.
Read more
MRP:$485.03 SAVE 15%
 5 in stock $413.18
Click for better price!
or call +44 20 7424 1960
quote 797062
Artikel 1 bis 11 von 11 auf Seite 1 von 1 anzeigen

Filter

Synth modules
DJ-Ausrüstung
Release Date
Featured
Close