100% Sicheres Einkaufen

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Sicheres Einkaufen

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Synth module accessories

View:
Options
Artikel 1 bis 50 von 93 auf Seite 1 von 2 anzeigen
1  2  »
FORTHCOMING
Tangible Waves AE Modular 10 x Patchwires (10cm)
Cat: 719704
 
Pack of 10 patch wires
Notes: A set of 10 Patchwires for AE modular; with a length of 10cm.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 10 x Patchwires (25cm)
Cat: 719705
 
Pack of 10 patch wires
Notes: A set of 10 Patchwires for AE modular; with a length of 25cm.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 10 x Patchwires (40cm)
Cat: 719706
 
Pack of 10 patch wires
Notes: A set of 10 Patchwires for AE modular; with a length of 40cm.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 10 x Patchwires (50cm)
Cat: 719707
 
Pack of 10 patch wires
Notes: A set of 10 Patchwires for AE modular; with a length of 50cm.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 4U Blank Module
Cat: 719726
 
Blank module for AE modular - 4U
Notes: If your rack isn't filled completely with modules, use this blank module to fill the spaces.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 8U Eurorack Adapter Frame
Cat: 719727
 
AE modular Eurorack adapter frame
Notes: The AE modular Eurorack adapter frame allows to integrate AE modular modules into Eurorack systems. It is basically an empty Eurorack-sized frame that can take up to 8 units of AE modules where two units are occupied by the mandatory MASTER module. Via the MASTER module the frame is powered from the Eurorack bus.

The product includes:

- The mounting frame with screws for mounting the AE modules
- The ribbon cable for Eurorack bus connection
- The bus cable
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 1 Row Rack Empty Case
Cat: 719708
 
Empty rack for AE modular, 16U
Notes: The 1-row rack for AE modular is 16 units wide; two of them are used by the MASTER module so you have 14U remaining for other modules.

Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.

Dimensions:41.3 x 11.2 x 4.5 cm (width x depth x height)
Read more
coming soon $28.34
FORTHCOMING
Tangible Waves AE Modular 2 Row Rack Empty Case
Cat: 719709
 
Empty rack for AE modular, 2 x 16U
Notes: The 2-row rack for AE modular is 16 units wide with 2 rows; the MASTER module consumes 2 units so you have 30U remaining for other modules.

Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.

Dimensions: 41.3 x 21.7 x 4.5 cm (width x depth x height)
Read more
coming soon $42.37
FORTHCOMING
Tangible Waves AE Modular Type 1 Bus Cable
Cat: 719711
 
Bus cable for AE modular
Notes: The Bus Cable connects the AE modular modules, it contains the power supply (GND, +5V) and CV, Gate, Controller, MIDI-clock/start/stop in a 10-pin ribbon cable. The folding pattern makes it possible to mount/unmount the module connected to the cable.

It has 16 sockets; one for connecting to the MASTER module and 15 for all other modules.

PLEASE NOTE: Type 1 is for a 1-row rack or the upper part of a 2-row rack (the row where the MASTER module is).
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular Type 2 Bus Cable
Cat: 719713
 
Bus cable for AE modular
Notes: The Bus Cable connects the AE modular modules, it contains the power supply (GND, +5V) and CV, Gate, Controller, MIDI-clock/start/stop in a 10-pin ribbon cable. The folding pattern makes it possible to mount/unmount the module connected to the cable.

It has 17 sockets; one for connecting to the MASTER module and 16 for all other modules.

PLEASE NOTE: Type 2 is for the lower part of a 2-row rack (the row below the MASTER module).
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 10 x Patchwires (17cm)
Cat: 719721
 
Pack of 10 patch wires
Notes: A set of 10 Patchwires for AE modular; with a length of 17cm.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 1U Blank Module
Cat: 719722
 
Blank module for AE modular - 1U
Notes: If your rack isn't filled completely with modules, use this blank module to fill the spaces.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 2U Blank Module
Cat: 719725
 
Blank module for AE modular - 2U
Notes: If your rack isn't filled completely with modules, use this blank module to fill the spaces.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 12U Eurorack Adapter Frame
Cat: 719730
 
AE modular Eurorack adapter frame
Notes: The AE modular Eurorack adapter frame allows to integrate AE modular modules into Eurorack systems. It is basically an empty Eurorack-sized frame that can take up to 12 units of AE modules where two units are occupied by the mandatory MASTER module. Via the MASTER module the frame is powered from the Eurorack bus.

The product includes:

- The mounting frame with screws for mounting the AE modules
- The ribbon cable for Eurorack bus connection
- The bus cable
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 16U Eurorack Adapter Frame
Cat: 719731
 
AE modular Eurorack adapter frame
Notes: The AE modular Eurorack adapter frame allows to integrate AE modular modules into Eurorack systems. It is basically an empty Eurorack-sized frame that can take up to 16 units of AE modules where two units are occupied by the mandatory MASTER module. Via the MASTER module the frame is powered from the Eurorack bus.

The product includes:

- The mounting frame with screws for mounting the AE modules
- The ribbon cable for Eurorack bus connection
- The bus cable
Read more
coming soon TBA
Cat: 727746 Rel: 08 Apr 19
 
Eurorack case with power supply
Notes: The EVZ1 6U 104 HP is a compact and lightweight case. It is made of metal and gets a noble vintage look thanks to beautiful wooden side parts. This 6U case is flat and offers two rows of 104 HP for the installation of modules.

The integrated 4 HP wide KAZU power solution with switching PSU and EVE1 bus board works extremely accurately and delivers very clean power. A total of up to 20 modules can be connected.

The KAZU PSU solution is of high quality and delivers a constant current without getting hot.

- Switching power supply, developed especially for modular systems
- Minimal voltage peaks and interferences
- Very little heating, even at high loads
- Overvoltage and short-circuit protection
- Primary voltage: 100 - 240 V
Read more
 1 in stock $403.63
Click for better price!
quote 727746
Cat: 727747 Rel: 03 May 19
 
Compact & lightweight metal case with wooden side panels
Notes: Made of metal, and with a noble vintage look thanks to beautiful wooden side parts, this 6U case is flat and offers two rows of 84 HP for the installation of modules. The integrated 4 HP wide KAZU power solution with switching PSU and EVE1 busboard works extremely accurately and delivers very clean power. A total of up to 20 modules can be connected. The KAZU PSU solution is of high quality and delivers a constant current without getting hot.
Read more
 1 in stock $340.06
Click for better price!
quote 727747
Cat: 698459 Rel: 08 Aug 18
 
Universal low-impedance bus board
Notes: The ACL EVE 1 busboard is used to distribute the operating voltages of a power supply unit to supply up to 20 modules in a Eurorack case.

It was developed with the aim of achieving the lowest possible electrical contact resistance between the power supply unit and the modules connected to it.

This is reflected in minimal potential differences between the power supply unit and between all connection terminals of the modules and the terminals, which almost completely eliminates any couplings between modules and the resulting interference.

This is achieved by a six-layer sandwich design in which each voltage supplied by the power supply unit has its own complete layer for distribution to the module connection terminals, i.e. +12V, -12V and +5V each have the complete surface of the bus board available as copper surface, while the ground even has three layers available, resulting in an extremely low resistance of the ground bar (ground). The arrangement of the layers is like a sandwich, there is almost no influence between e.g. the +5V rail on which often disturbing digital modules are connected and ground or the +/- 12V rails. In addition, there are 4 buffer capacitors with 22uF and 100nF each for the +12V and -12V rail, which are arranged as parallel connected packets with 22uF and 100nF each at the outer ends left and right. These capacitors are Ultra Low ESR MLCC types.

Furthermore, a CV and a gate bus are available up to four times (two at the top and two at the bottom, each bridged by a jumper). These are consequently shielded from each other and from the voltage bars and thus cannot influence each other or other voltage bars (+/- 12V, +5V) by crosstalk, which further rounds off the "low-noise design".
Read more
 1 in stock $62.51
ACL Kazu To EVE1 Connection Cable (module connection cable)
Cat: 698460 Rel: 08 Aug 18
 
Module connection cable
Notes: This cable is needed to connect the ACL KAZU PSU module to the EVE busboard. The cable is equipped with two five-pin connectors, which are compatible to KAZU and EVE-1.

Module and bus board are not included.
Read more
 1 in stock $10.58
FORTHCOMING
Future Retro Flying Bus Cable
coming soon $9.52
FORTHCOMING
Boredbrain Splix 3.5mm Inline Splitter Mixer (moon grey)
Cat: 725974
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
coming soon $13.24
FORTHCOMING
Boredbrain Splix 3.5mm Inline Splitter Mixer (slime green)
Cat: 725964
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
coming soon $13.24
FORTHCOMING
Boredbrain Splix 3.5mm Inline Splitter Mixer (plasmic pink)
Cat: 725965
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
coming soon $13.24
FORTHCOMING
Boredbrain Splix 3.5mm Inline Splitter Mixer (quantum blue)
Cat: 725967
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
coming soon $13.24
FORTHCOMING
Boredbrain Splix 3.5mm Inline Splitter Mixer (nuclear yellow)
Cat: 725969
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
coming soon $13.24
FORTHCOMING
Boredbrain Splix 3.5mm Inline Splitter Mixer (astral white)
Cat: 725970
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
coming soon $13.24
FORTHCOMING
Boredbrain Splix 3.5mm Inline Splitter Mixer (amethyst purple)
Cat: 725975
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
coming soon $13.24
FORTHCOMING
Boredbrain Splix 3.5mm Inline Splitter Mixer (solar orange)
Cat: 725976
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
coming soon $13.24
FORTHCOMING
Boredbrain Splix 3.5mm Inline Splitter Mixer (dark graphite)
Cat: 725978
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
coming soon $13.24
FORTHCOMING
Boredbrain Splix 3.5mm Inline Splitter Mixer (oblivion black)
Cat: 725971
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
coming soon $13.24
Cat: 714409 Rel: 31 Dec 18
 
Pack of 50 cross head M3 eurorack screws
Notes: M3 is the original mounting screw as specified by Doepfer in the Eurorack specification. M3 screws are used in cases by Doepfer, TipTop, Intellijel and others.
Read more
 More than 10 in stock $3.17
Cat: 714419 Rel: 31 Dec 18
 
Pack of 50 cross head M2.5 eurorack screws
Notes: M2.5 screws have gained popularity in the US with manufacturers such as Elite, Make Noise, and anyone using Vector rails.
Read more
 3 in stock $3.17
Cat: 714403 Rel: 31 Dec 18
 
Screwdriver with reversible phillips and flat head types
Notes: Screwdriver with reversible phillips and flat head types.

Fits both Eurorack screw sizes: M3 and M2.5.
Read more
 2 in stock $4.76
Cat: 714422 Rel: 31 Dec 18
 
10-16 pin power cable
Notes: Standard Eurorack power cable.

Use the 10-16 variant for most modules. 16-16 is for modules that use the internal +5V rail.

Length: 25CM (9.8")
Read more
 5 in stock $1.05
Cat: 714415 Rel: 31 Dec 18
 
Single cross head M2.5 screw - 7mm long
Notes: M2.5 screws have gained popularity in the US with manufacturers such as Elite, Make Noise, and anyone using Vector rails.
Read more
 7 in stock $3.17
Cat: 700033 Rel: 28 Aug 18
 
Pack of 100 screws
Notes: Frap Tools cross recessed pan head screws.
Read more
 2 in stock $8.69
Cat: 700034 Rel: 24 Aug 18
 
Pack of 100 plastic washers
Notes: Black plastic washers for M3 screws.

Fits: M3x6 Black Button Head Socket Cap Screws, M3x6 Zinc Phillips Panhead Screws
Read more
 4 in stock $8.69
Cat: 604235 Rel: 09 Mar 16
 
3.5mm jack plug connected to bipolar LED light, for purely aesthetic purposes - compatible with Eurorack systems
Notes: 3.5mm jack plug connected to bipolar LED.

Blue LED indicates positive voltage.

Red LED indicates negative voltage.
Read more
 3 in stock $5.29
Cat: 604233 Rel: 09 Mar 16
 
3.5mm jack plug connected to bipolar LED light, for purely aesthetic purposes - compatible with Eurorack systems
Notes: 3.5mm jack plug connected to bipolar LED

Red LED indicates positive voltage.

Yellow LED indicates negative voltage.
Read more
 2 in stock $5.09
FORTHCOMING
Pittsburgh Modular Lifeforms Research Console Angled Desktop Eurorack Case
coming soon $339.00
Cat: 719530 Rel: 13 Feb 19
 
Precision machined solid oak end cheeks for the Arturia Keystep
Notes: Custom made Solid Oak Arturia Keystep stand with additional 94 HP Eurorack rails - precision machined to give a snug fit for the Arturia Keystep.

The Keystep sits in a recess to stop it from moving or sliding, gripped by the sides which forms a strong and sturdy stand. The oak has been oiled and is ready to assemble and should stay looking beautiful for a long time.
Read more
 1 in stock $105.93
Click for better price!
quote 719530
Cat: 598247 Rel: 08 Mar 16
 
Lifeforms logo blank panel - 6HP wide
Notes: Lifeforms HP-6

A 6HP logo panel manufactured using the same custom matte aluminium finish and logo graphic as the Lifeforms modules line.


Panel size 6hp
Read more
 2 in stock $12.98
Cat: 598242 Rel: 08 Mar 16
 
Hand-stained all hardwood eurorack synth module enclosure with power - 360HP of space
Notes: ***POWER SET FOR EU AND AUSTRALIA 220-230V:
The Pittsburgh Modular Structure 208 and Structure 360 eurorack enclosures use a switching power supply that needs manually set to the correct AC input voltage. The internal switch has already be properly set for 220-230 VAC. This setting works for the EU and Australia or other countries that use 220-230 VAC power.
For use in countries that use 100-120 VAC power, such as North America and Japan, the switch inside the case on the AC/DC regulator needs to be switched to the left. The switch is marked with a Yellow sticker printed with "AC input voltage can be selected by switch. Check input voltage avoiding damage before power on." The switch is located on the side of the enclosure below the arrow.
Please contact Pittsburgh Modular with any questions. service@pittsburghmodular.com***

Structure EP-360 Eurorack Enclosure

Maximum Power for a New Generation -

Beautifully stained hardwood triple row, 360hp powered eurorack travel case with lid. A huge case to house a monster synth. Features include a professional, heavy duty, internal power supply designed to exceed the needs of the most demanding analog and digital eurorack systems.




Everything is New:
With years of research and two case lines under our belt, we decided to start over and produce a line of cases for the next generation of eurorack synthesizers. The eurorack modular ecosystem is expanding faster than ever and manufacturers are constantly pushing eurorack cases and power supplies to the limits. What started as a power supply designed to drive primarily analog synthesizers has transformed into a supply that needs to simultaneously meet the unique demands of sensitive analog circuitry, power hungry digital processors, and ground sensitive user interface modules.

We started with what matters most. Clean power. A lot of it. Up to 3x the amount of clean power available in cases from other brands. Next we turned our focus to the enclosure itself and there was only one goal. Make the case stronger. Our engineers tested countless combinations utilizing different types of wood, joints, adhesives, assembly techniques, and hardware to ensure that Structure cases are as durable as they are beautiful.

With a clean and gorgeous design that promotes creative exploration, the Structure enclosures are our most robust and refined case line yet. With massive amounts of both room and clean power, you can reach completely new heights in your creative performances.






Includes:
Structure EP-360

Power
:
6 Amps of Clean +12v Power

6 Amps of Clean -12v Power

5 Amps of Clean +5v Power

Custom Powered Bus Board with 15 Keyed Eurorack Power Headers Per Row, 45 Power Headers Total

External On-off Rocker Power Switch with LED

Universal IEC Power Connector Works Anywhere

Structure EP-360 Enclosure
:
Hardwood and Steel Construction (No cheap plastic here)

Triple 120hp Rows

Removable Lid

Lid Fits Over Fully Patched System (No need to remove patch cables)

Edge to Edge Rail Design Reduces Gaps Between Modules and the Side of the Case

24 Smooth Sliding Square Nuts Per Rail (Holds up to 72 modules)

Beautifully Hand-Stained Hardwood

Matching Black Steel Hardware Set




Structure EP-360 Dimensions
:
External Depth with lid:9 1/4"
External Depth without Lid: 5 1/2"
External Height: 17"
External Width: 25 1/2"
Internal Depth Above Power Supply: 2 3/4"
Internal Depth Above Bus Board: 3 3/4"
Internal Depth Above Nothing: 4 1/4"
Read more
 1 in stock $794.56
Cat: 725946 Rel: 25 Mar 19
 
Sensor Pack B - features three useful components for owners of the Field Kit
Notes: The Field Kit Sensor Pack B consists of 3 sensors:

- Accelerometer
- Capacitive Touch
- Sequential Voltage Source
- 2 x Dupont 3 contact cable to connect the Sensors to the Field Kit

Accelerometer:

This board measures acceleration along three axis. Those measurements are used to generate CV signals or triggers. The accelerometer board features three modes:

- Tap Detector with continuous CV output
- Tap Detector with trigger output
- The 'motorcycle mode'

Capacitive Touch:

Connect the Capacitive Touch to organic items and use them as a controller, the Field Kit Sensor Interface will send out signals once you touch the matter. Banana rock, Cucumber Swing, Avocado Samba!

Sequential Voltage Source:

The Sequential Voltage Source is a little magical module which you can use in your musical setup quite easily and allows your Field Kit to become a Sequencer too. This board has three different modes: Stepped Random Voltage, CV Sequencer and a Euclidean Trigger Sequencer.
Read more
 2 in stock $51.90
Click for better price!
quote 725946
Erica Synths Pico Case (synth module case)
Cat: 686700 Rel: 27 Apr 18
 
Compact enclosure designed to house Erica Synths Pico modules
Notes: Small desktop enclosure for Eurorack modules with 42 HP space and a maximum depth of 32mm. A relatively strong power solution with an external power supply and an on/off switch located at the case is included.

The power supply provides:

- 850 mA at +12V
- 850mA at -12V
- 500mA at +5V

The power distribution has 14 connectors and the case can house exactly fourteen modules from Erica's Pico Series.
Read more
 3 in stock $163.14
Click for better price!
quote 686700
Cat: 725948 Rel: 25 Mar 19
 
Ribbon controller for the Field Kit
Notes: This is an awesome addition to the Field Kit. Slide your finger over the Softpot and the voltage will increase and decrease. The Softpot has a hold function, so you can play it like a keyboard, outputting voltages that are very useful to control motors and casually search through the radio bands, or to control a hacked walkman!

The product consists of:

- Field Kit Linear Softpot Sensor
- 1 x Dupont 3 contact cable to connect the Sensors to the Field Kit
Read more
 5 in stock $26.75
Cat: 614712 Rel: 20 Jun 16
 
Eurorack synth module case, with built-in power supply - 84HP wide
Notes: Desktop Eurorack moduile case 3U - 84HP with power supply on the left side.

Plexiglas side panels 5mm thick.

Aluminium chassis.

6cm deep, but only 4cm deep all along the 5HP of the power supply. Check your modules before!

Tech specs:
- Width : 84HP
- Depth : 6cm
- Depth all along the 5HP of the power supply : 4cm
- Current Consumption : +12V : 2.4A ; -12V : 1.2A ; +5V : 0.5A
Read more
 1 in stock $176.92
Click for better price!
quote 614712
Cat: 614713 Rel: 20 Jun 16
 
Eurorack synth module case, with built-in power supply - 104HP wide
Notes: Desktop Eurorack moduile case 3U - 104HP with power supply on the left side.

Plexiglas side panels 5mm thick.

Aluminium chassis.

6cm deep, but only 4cm deep all along the 5HP of the power supply. Check your modules before!

Tech specs:
- Width : 104HP
- Depth : 6cm
- Depth all along the 5HP of the power supply : 4cm
- Current Consumption : +12V : 2.4A ; -12V : 1.2A ; +5V : 0.5A
Read more
 1 in stock $194.92
Click for better price!
quote 614713
Cat: 725949 Rel: 15 Apr 19
 
3U 40HP compact skiff case including PSU
Notes: The Mini Case offers 40 HP for mounting modules. A power supply is built-in.

208 mm long x 45mm deep.

PLEASE NOTE: Comes with EU 2 pin plug only - UK adapter may be required.
Read more
 2 in stock $113.35
Click for better price!
quote 725949
Cat: 716764 Rel: 31 Jan 19
 
Skiff-friendly power supply for Eurorack modules
Notes: Excalibus is an affordable, skiff friendly powerful power supply (1.2A per rail) and bus. It provides the best of all worlds, power, stability, small size and price. Specially designed for two rows systems with mid to high power consumption. DIY friendly and safe, as it works with any standard DC supply.

Measurements: 50mm x 400mm x 12mm
Read more
 1 in stock $128.18
Click for better price!
quote 716764
Artikel 1 bis 50 von 93 auf Seite 1 von 2 anzeigen
1  2  »

Filter

Synth module accessories
DJ-Ausrüstung
Release Date
Featured
Close