100% Sicheres Einkaufen

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Sicheres Einkaufen

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Synth module accessories

View:
Options
Artikel 1 bis 50 von 96 auf Seite 1 von 2 anzeigen
1  2  »
Cat: 725500 Rel: 15 Apr 19
 
Official 10HP 4ms blank panel
Notes: Make Noise blank panel - 10HP width. Black coloured PCB material with Make Noise logo.
Read more
 1 in stock $8.45
4ms 16 Pin Multi Power Cable (Eurorack power cable)
Cat: 711994 Rel: 12 Dec 18
 
Flexible power cable for Eurorack modules
Notes: 16-conductor ribbon cable with four 16-pin connectors (20" total length), for connecting more than 2 modules in a Pod.
Read more
 2 in stock $5.87
Cat: 725492 Rel: 15 Apr 19
 
Jumper cable for daisy chaining 4ms Listen modules and/or 4ms WAV recorder
Notes: The Audio Jumper 3-pin cable can be used to connect two Listen 4, Listen 4 Quarters and/or Listen IO modules to form a larger mixer. It's also possible to connect a WAV recorder with a Listen module for direct recording.
Read more
 1 in stock $2.38
Cat: 725497 Rel: 15 Apr 19
 
Official 4HP 4ms blank panel
Notes: Make Noise blank panel - 4HP width. Black coloured PCB material with Make Noise logo.
Read more
 1 in stock $5.55
Cat: 725499 Rel: 15 Apr 19
 
Official 8HP 4ms blank panel
Notes: Make Noise blank panel - 8HP width. Black coloured PCB material with Make Noise logo.
Read more
 1 in stock $7.67
Cat: 720434 Rel: 11 Feb 19
 
Bus stick, unshrouded
Notes: Bus Sticks are low-profile, small footprint power distribution boards for powering up to 13 modules using un-shrouded headers. Simply connect to a Row Power module using the included cable. Attaches to your case using adhesive pads (included) or by drilling and screwing.
Read more
 2 in stock $31.98
Cat: 720436 Rel: 11 Feb 19
 
Two 14" flying bus cables with a total of 14 male header pins
Notes: Flying Bus (male pin) are passive power distribution cables that work with the Row Power to distribute power to your modules. Can be daisy-chained if extra headers are needed.
Read more
 2 in stock $24.05
Cat: 706834 Rel: 12 Dec 18
 
20HP metal enclosure for Eurorack modules with built-in power supply
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod20 is 20HP with 1.34" (34mm) of available module depth. The built-in power supply has two power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod20 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.
Read more
 2 in stock $81.94
Cat: 706833 Rel: 12 Dec 18
 
20HP metal enclosure for Eurorack modules
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod20 Unpowered is 20HP with 1.34" (34mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.
Read more
 2 in stock $48.63
Click for better price!
quote 706833
Cat: 706836 Rel: 12 Dec 18
 
26HP metal enclosure for Eurorack modules
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod26 Unpowered is 26HP with 1.34" (34mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.
Read more
 2 in stock $52.60
Click for better price!
quote 706836
Cat: 706840 Rel: 12 Dec 18
 
32HP metal enclosure for Eurorack modules with built-in power supply
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod32 is 32HP with 1.34" (34mm) of available module depth. The built-in power supply has two power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod32 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.
Read more
 4 in stock $111.01
Click for better price!
quote 706840
Cat: 706839 Rel: 12 Dec 18
 
32HP metal enclosure for Eurorack modules
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod32 Unpowered is 32HP with 1.34" (34mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.
Read more
 2 in stock $57.09
Cat: 725502 Rel: 12 Apr 19
 
Portable, compact enclosure that turns Eurorack modules into table-top instruments
Notes: The Pod40X is 40HP with 2.00" (51mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod40 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.
Read more
 1 in stock $130.04
Cat: 725503 Rel: 12 Apr 19
 
Portable, compact enclosure that turns Eurorack modules into table-top instruments
Notes: The Pod40X Unpowered is 40HP with 2" (51mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.
Read more
 2 in stock $71.89
Click for better price!
quote 725503
Cat: 725517 Rel: 12 Apr 19
 
Portable, compact enclosure that turns Eurorack modules into table-top instruments
Notes: The Pod48X is 48HP with 2.00" (51mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod48X includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.
Read more
 1 in stock $138.50
Cat: 725518 Rel: 12 Apr 19
 
Portable, compact enclosure that turns Eurorack modules into table-top instruments
Notes: The Pod40X Unpowered is 48HP with 2" (51mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.
Read more
 2 in stock $76.12
Click for better price!
quote 725518
Cat: 698459 Rel: 08 Aug 18
 
Universal low-impedance bus board
Notes: The ACL EVE 1 busboard is used to distribute the operating voltages of a power supply unit to supply up to 20 modules in a Eurorack case.

It was developed with the aim of achieving the lowest possible electrical contact resistance between the power supply unit and the modules connected to it.

This is reflected in minimal potential differences between the power supply unit and between all connection terminals of the modules and the terminals, which almost completely eliminates any couplings between modules and the resulting interference.

This is achieved by a six-layer sandwich design in which each voltage supplied by the power supply unit has its own complete layer for distribution to the module connection terminals, i.e. +12V, -12V and +5V each have the complete surface of the bus board available as copper surface, while the ground even has three layers available, resulting in an extremely low resistance of the ground bar (ground). The arrangement of the layers is like a sandwich, there is almost no influence between e.g. the +5V rail on which often disturbing digital modules are connected and ground or the +/- 12V rails. In addition, there are 4 buffer capacitors with 22uF and 100nF each for the +12V and -12V rail, which are arranged as parallel connected packets with 22uF and 100nF each at the outer ends left and right. These capacitors are Ultra Low ESR MLCC types.

Furthermore, a CV and a gate bus are available up to four times (two at the top and two at the bottom, each bridged by a jumper). These are consequently shielded from each other and from the voltage bars and thus cannot influence each other or other voltage bars (+/- 12V, +5V) by crosstalk, which further rounds off the "low-noise design".
Read more
 1 in stock $62.38
Cat: 727746 Rel: 08 Apr 19
 
Eurorack case with power supply
Notes: The EVZ1 6U 104 HP is a compact and lightweight case. It is made of metal and gets a noble vintage look thanks to beautiful wooden side parts. This 6U case is flat and offers two rows of 104 HP for the installation of modules.

The integrated 4 HP wide KAZU power solution with switching PSU and EVE1 bus board works extremely accurately and delivers very clean power. A total of up to 20 modules can be connected.

The KAZU PSU solution is of high quality and delivers a constant current without getting hot.

- Switching power supply, developed especially for modular systems
- Minimal voltage peaks and interferences
- Very little heating, even at high loads
- Overvoltage and short-circuit protection
- Primary voltage: 100 - 240 V
Read more
 1 in stock $402.83
Click for better price!
quote 727746
Cat: 727747 Rel: 03 May 19
 
Compact & lightweight metal case with wooden side panels
Notes: Made of metal, and with a noble vintage look thanks to beautiful wooden side parts, this 6U case is flat and offers two rows of 84 HP for the installation of modules. The integrated 4 HP wide KAZU power solution with switching PSU and EVE1 busboard works extremely accurately and delivers very clean power. A total of up to 20 modules can be connected. The KAZU PSU solution is of high quality and delivers a constant current without getting hot.
Read more
 1 in stock $339.39
Click for better price!
quote 727747
ACL Kazu To EVE1 Connection Cable (module connection cable)
Cat: 698460 Rel: 08 Aug 18
 
Module connection cable
Notes: This cable is needed to connect the ACL KAZU PSU module to the EVE busboard. The cable is equipped with two five-pin connectors, which are compatible to KAZU and EVE-1.

Module and bus board are not included.
Read more
 1 in stock $10.56
FORTHCOMING
ALM Pamela's Discotheque Analogue DIN Sync Clock Device For Use With Pioneer CDJ's
coming soon TBA
Cat: 675764 Rel: 13 Apr 18
 
88 HP comprehensive Eurorack case with 5 HP power module & Arturia Link system
Notes: RackBrute 3U is a comprehensive Eurorack housing, transport, and protection solution. Featuring configurable positions, dependable power supply, and maximum practicality, you can be assured your precious modules will be well guarded.

Modular gear is a precious commodity, and you need a versatile housing and security system to accommodate them. A first glance, you'll see that this is a perfectly fitted 3U, 88 HP case made of a light but strong aluminium chassis, fitted with wood side panels. Deceptively simple, RackBrute is far more than a simple box. It includes many smart additions, such as the included +12V / -12V / +5V power supply that ensures that keeps everything up and running, and the multi-position handle system that not only lets you carry your collection with ease, but also lets you deploy an optimal operating angle, whatever your preference.

In addition to keeping your modules safe and secure, RackBrute 3U gives you total control of the situation, no matter the context. The first of its secret weapons is the Link fastening system. Paired with the included handle, it will let you choose one of several configurations and orientations for your modular arsenal. Whether you want your gear stealthy and prone, or standing to attention, RackBrute is at your command.

The second trick up its sleeve is the stalwart, ever-reliable, power supply module. Including two independent circuits to supply common modular voltages, it will more than cover your need for +12V, -12V and +5V, providing up to 1600mA in total.

Thirdly, its robust power rail includes sophisticated noise-filtering technology and provides 20 standard slots to leave plenty of space for your collection.

Once you're powered, in position, and locked down, you'll feel like your modular rig could withstand a siege.

The Link fastening system not only equips the RackBrute 3U, but also its large-calibre sibling, RackBrute 6U as well the MiniBrute 2 and MiniBrute 2S. No matter the combination you go for, you can make the most out of your extensive module collection, or create a powerful EcoSystem with the extensive CV/Gate connectivity of the MiniBrute 2 and 2S.
Read more
 2 in stock $210.39
Cat: 675765 Rel: 13 Apr 18
 
176 HP all-inclusive Eurorack case with 5 HP power module & Arturia Link system
Notes: RackBrute 6U is an all-inclusive Eurorack case ensuring the total security of your modules and maximum practicality in all conditions of use. Its multi-position configuration and included dependable power supply make it the true specialist solution.

RackBrute 6U provides you with 176HP to store and secure your enviable collection of Eurorack modules in an everlasting yet lightweight aluminium chassis flanked by two wood panels. Once you're locked and loaded, your modular setup will look and feel like a monolith, yet more flexible than ever thanks the Link fastening system and the paired handle. When on the move, it will make the transport of your modular equipment a walk in the park. When in position, it will let you organize your command centre the way you want it. Modules don't live on love alone, and RackBrute 6U keeps everything alive with its +12V / -12V / +5V power supply.

When you have to hold your position for hours, it's better to be well set up and to have a clear view of the surroundings. For this reason, Arturia developed the Link system, a convenient and simple-to-use fastening system that allows you to orientate the dedicated handle so that you can give your modular the most tactically advantageous position. Whether prone, crouching, or standing to attention, RackBrute 6U will always be on the lookout, ready for orders.

Troops are nothing if they are not properly fed. No problem, RackBrute 6U is not just a box. It includes a formidable +12V / -12V / +5V power supply ensuring your firepower up to 1600mA. This is coupled with a military-grade power rail with 32 available slots, including advanced noise filtering technology that guarantees optimum conditions.

With RackBrute 6U, even the most headstrong modules fall into line.

The RackBrute 6U fully takes advantage of the Link System, and it's not alone. You'll also find the Arturia Link on the more compact RackBrute 3U, as well as the self-contained MiniBrute 2 and MiniBrute 2S synthesizers. What solution will you go for? Will your field of operations be fully based on Eurorack, or the powerful force of analog monosynth flagship supported by a fleet of complementary modules?
Read more
 3 in stock $287.03
Cat: 670993 Rel: 21 Dec 17
 
Push-button control for the Bastl Bit Ranger
Notes: The Synapsis is a 4x4 pushbutton matrix that offers performative control of the Bit Ranger.

There are 8 patch points connected to 4 rows (ABCD) and 4 columns (1234) of buttons. Pressing button A1 connects point A to point 1. A2 connects A to 2. B2 connects B to 2 and so on.

Package includes:

- The Synapsis
- 10 short + 10 long jumper wires
- Hex key

Using the Synapsis:

It is best used by dedicating rows to outputs (like divider or mix bits) and columns to inputs (like the byte section or inhibit points). In this configuration every possible combination of buttons will connect outputs to inputs and cause a change in the behaviour of the BitRanger. As always it is best to experiment and try new things.

Installing the Synapsis:

- Remove the screws from the bottom of the bit ranger and then remove the bottom plate.
- Remove the small section of plastic from the front edge of the face plate and place it somewhere safe. In newer models there is a slot in the middle of the bottom opening where the mini plate can be placed for storage.
- Screw the bottom plate back onto the BitRanger.
- Slide the Synapsis into the opening in the front.
- Place screws through the holes in the front of the bottom plate to secure Synapsis in place.

That's it!
Read more
 1 in stock $30.93
Cat: 716764 Rel: 31 Jan 19
 
Skiff-friendly power supply for Eurorack modules
Notes: Excalibus is an affordable, skiff friendly powerful power supply (1.2A per rail) and bus. It provides the best of all worlds, power, stability, small size and price. Specially designed for two rows systems with mid to high power consumption. DIY friendly and safe, as it works with any standard DC supply.

Measurements: 50mm x 400mm x 12mm
Read more
 1 in stock $127.93
Click for better price!
quote 716764
FORTHCOMING
Boredbrain Splix 3.5mm Inline Splitter Mixer (amethyst purple)
Cat: 725975
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
coming soon $13.22
FORTHCOMING
Boredbrain Splix 3.5mm Inline Splitter Mixer (astral white)
Cat: 725970
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
coming soon $13.22
FORTHCOMING
Boredbrain Splix 3.5mm Inline Splitter Mixer (dark graphite)
Cat: 725978
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
coming soon $13.22
FORTHCOMING
Boredbrain Splix 3.5mm Inline Splitter Mixer (moon grey)
Cat: 725974
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
coming soon $13.22
FORTHCOMING
Boredbrain Splix 3.5mm Inline Splitter Mixer (nuclear yellow)
Cat: 725969
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
coming soon $13.22
FORTHCOMING
Boredbrain Splix 3.5mm Inline Splitter Mixer (oblivion black)
Cat: 725971
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
coming soon $13.22
FORTHCOMING
Boredbrain Splix 3.5mm Inline Splitter Mixer (plasmic pink)
Cat: 725965
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
coming soon $13.22
FORTHCOMING
Boredbrain Splix 3.5mm Inline Splitter Mixer (quantum blue)
Cat: 725967
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
coming soon $13.22
FORTHCOMING
Boredbrain Splix 3.5mm Inline Splitter Mixer (slime green)
Cat: 725964
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
coming soon $13.22
FORTHCOMING
Boredbrain Splix 3.5mm Inline Splitter Mixer (solar orange)
Cat: 725976
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
coming soon $13.22
FORTHCOMING
Doepfer A-100B2v Vintage Blank Panel 2TE (black)
Cat: 731209
 
vintage aluminium panel
Notes: The Doepfer Blank Panel 2TE is a sleek, and robust panel designed for use with modular racks and other applications. The 2mm anodised aluminium construction ensures optimal durability and strength. The Doepfer Blank Panel boasts a width of 2HP and a height of 10mm. It's simple yet durable design is ideal for a range of racks and modular setups.
Read more
coming soon $5.55
FORTHCOMING
Doepfer A-100B42v Vintage Blank Panel 42TE (black)
coming soon $17.71
FORTHCOMING
Doepfer A-100B4v Vintage Blank Panel 4TE (black)
Cat: 731210
 
vintage blank panel
coming soon $6.61
FORTHCOMING
Doepfer A-100B8v Vintage Blank Panel 8TE (black)
coming soon $6.87
Cat: 714422 Rel: 31 Dec 18
 
10-16 pin power cable
Notes: Standard Eurorack power cable.

Use the 10-16 variant for most modules. 16-16 is for modules that use the internal +5V rail.

Length: 25CM (9.8")
Read more
 6 in stock $1.05
Cat: 714419 Rel: 31 Dec 18
 
Pack of 50 cross head M2.5 eurorack screws
Notes: M2.5 screws have gained popularity in the US with manufacturers such as Elite, Make Noise, and anyone using Vector rails.
Read more
 3 in stock $3.16
Cat: 714415 Rel: 31 Dec 18
 
Single cross head M2.5 screw - 7mm long
Notes: M2.5 screws have gained popularity in the US with manufacturers such as Elite, Make Noise, and anyone using Vector rails.
Read more
$3.16 SAVE 10%
 7 in stock $2.85
Cat: 714409 Rel: 31 Dec 18
 
Pack of 50 cross head M3 eurorack screws
Notes: M3 is the original mounting screw as specified by Doepfer in the Eurorack specification. M3 screws are used in cases by Doepfer, TipTop, Intellijel and others.
Read more
 More than 10 in stock $3.16
Cat: 714405 Rel: 31 Dec 18
 
Single cross head M3 screw - 7mm long
 1 in stock $3.16
Cat: 714403 Rel: 31 Dec 18
 
Screwdriver with reversible phillips and flat head types
Notes: Screwdriver with reversible phillips and flat head types.

Fits both Eurorack screw sizes: M3 and M2.5.
Read more
 2 in stock $4.75
Cat: 614713 Rel: 20 Jun 16
 
Eurorack synth module case, with built-in power supply - 104HP wide
Notes: Desktop Eurorack moduile case 3U - 104HP with power supply on the left side.

Plexiglas side panels 5mm thick.

Aluminium chassis.

6cm deep, but only 4cm deep all along the 5HP of the power supply. Check your modules before!

Tech specs:
- Width : 104HP
- Depth : 6cm
- Depth all along the 5HP of the power supply : 4cm
- Current Consumption : +12V : 2.4A ; -12V : 1.2A ; +5V : 0.5A
Read more
 1 in stock $194.54
Click for better price!
quote 614713
Cat: 725949 Rel: 15 Apr 19
 
3U 40HP compact skiff case including PSU
Notes: The Mini Case offers 40 HP for mounting modules. A power supply is built-in.

208 mm long x 45mm deep.

PLEASE NOTE: Comes with EU 2 pin plug only - UK adapter may be required.
Read more
 2 in stock $113.12
Click for better price!
quote 725949
Cat: 614712 Rel: 20 Jun 16
 
Eurorack synth module case, with built-in power supply - 84HP wide
Notes: Desktop Eurorack moduile case 3U - 84HP with power supply on the left side.

Plexiglas side panels 5mm thick.

Aluminium chassis.

6cm deep, but only 4cm deep all along the 5HP of the power supply. Check your modules before!

Tech specs:
- Width : 84HP
- Depth : 6cm
- Depth all along the 5HP of the power supply : 4cm
- Current Consumption : +12V : 2.4A ; -12V : 1.2A ; +5V : 0.5A
Read more
 1 in stock $176.57
Click for better price!
quote 614712
Erica Synths Pico Case (synth module case)
Cat: 686700 Rel: 27 Apr 18
 
Compact enclosure designed to house Erica Synths Pico modules
Notes: Small desktop enclosure for Eurorack modules with 42 HP space and a maximum depth of 32mm. A relatively strong power solution with an external power supply and an on/off switch located at the case is included.

The power supply provides:

- 850 mA at +12V
- 850mA at -12V
- 500mA at +5V

The power distribution has 14 connectors and the case can house exactly fourteen modules from Erica's Pico Series.
Read more
 3 in stock $162.82
Click for better price!
quote 686700
Cat: 700034 Rel: 24 Aug 18
 
Pack of 100 plastic washers
Notes: Black plastic washers for M3 screws.

Fits: M3x6 Black Button Head Socket Cap Screws, M3x6 Zinc Phillips Panhead Screws
Read more
 4 in stock $8.67
Artikel 1 bis 50 von 96 auf Seite 1 von 2 anzeigen
1  2  »

Filter

Synth module accessories
DJ-Ausrüstung
Release Date
Featured
Close