100% Sicheres Einkaufen
Studio equipment
Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.
100% Sicheres Einkaufen
DJ equipment
Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices. Visit Juno DJ
Hilfe
BestellenProbleme beim BestellenHäufig gestellte FragenKontaktiere unsKontaktiere uns (Lieferanten)Über JunoJuno DailyNeuerscheinungen dieser WocheDJ & Studio StoreTagsFeedbackDatenschutzregelungReturns & refundsAGBFinanceJuno Vinyl DistributionJuno Vinyl WholesaleJuno Marketing and PR departmentPromote your label / releases
Filter
Synth Module Accessories
Essentials for any Eurorack modular synth setup, we stock a full range of accessories including patch cables, screws and cases. Our most popular accessories include Befaco’s excellent Knurlies, which make it quick and easy to swap modules without tools. You’ll also find cables and adaptors for MIDI, power supplies and audio signals as well as CV/gate patch cables. Cable holders, blank Eurorack panels and a range of powered Eurorack cases of all sizes complete our selection. Brands like ALM Busy Circuits, 4ms and Doepfer make a wide variety of handy accessories to help make your modular rig complete.
Options
Sort
Artist
Artist
- Bestseller:
- Absteigend sortieren
- Artist:
- Alphabetisch sortieren (aufsteigend)
- Alphabetisch sortieren (absteigend)
- Title:
- Alphabetisch sortieren (aufsteigend)
- Alphabetisch sortieren (absteigend)
- Brand:
- Alphabetisch sortieren (aufsteigend)
- Alphabetisch sortieren (absteigend)
- Date:
- Nach Alter sortieren (absteigend)
- Nach Alter sortieren (aufsteigend)
- Price:
- Nach Preis sortieren (aufsteigend)
- Nach Preis sortieren (absteigend)
- Brand rank:
- Low to high
- High to low
People also bought...
Notes: Two interconnected attenuators that can perform a variety of mixing functions without taking space or power in the rack. Mix, pan or use each attenuator separately. The 0ttenuator does all kinds of useful tasks throughout the rack.
The 0ttenuator can:
Mix two signals together
Send one signal to two places
Attenuate two signals separately
Be advised that even when the knobs are all the way up there is a little bit of signal loss.
Whether you need some extra utilities for your studio behemoth or you need to save space on the road, 0HP gives you options. These modules come as a small circuit board mounted to a colourful piece of laser cut plexiglass, with a small chance to get one of Mystic Circuits' fabulous rare colors. With a robust line of modules planned in the future, full DIY kits and an open hardware license we aim to make modular synthesis accessible and fun for the veteran and new user alike.
Disclaimers
Since the modules are passive, some signal loss and distortion should be expected.
… Read moreThe 0ttenuator can:
Mix two signals together
Send one signal to two places
Attenuate two signals separately
Be advised that even when the knobs are all the way up there is a little bit of signal loss.
Whether you need some extra utilities for your studio behemoth or you need to save space on the road, 0HP gives you options. These modules come as a small circuit board mounted to a colourful piece of laser cut plexiglass, with a small chance to get one of Mystic Circuits' fabulous rare colors. With a robust line of modules planned in the future, full DIY kits and an open hardware license we aim to make modular synthesis accessible and fun for the veteran and new user alike.
Disclaimers
Since the modules are passive, some signal loss and distortion should be expected.
out of stock $29.58
People also bought...
Notes: The 0HP VCA/ AND acts like a faucet: When a high control voltage is present, the input is allowed to flow to the output. When there is a low control voltage, the flow is restricted and nothing is present at the output. Using a high speed optocoupler, the module accepts audio at all inputs so audio-rate amplitude modulation is possible for pseudo-ring modulation effects. When used with gates at both the input and the CV input, the module acts as a logical AND gate (an AND gate outputs a high voltage when both of the inputs are high.) A built in trigger converter outputs spike whenever the main output transitions from low to high.
Whether you need some extra utilities for your studio behemoth or you need to save space on the road, 0HP gives you options. Mystic Circuits' modules come as a small circuit board mounted to a colorful piece of laser cut plexiglass, with a small chance to get one of their fabulous rare colours. With a robust line of modules planned in the future, full DIY kits and an open hardware licence we aim to make modular synthesis accessible and fun for the veteran and new user alike.
… Read moreWhether you need some extra utilities for your studio behemoth or you need to save space on the road, 0HP gives you options. Mystic Circuits' modules come as a small circuit board mounted to a colorful piece of laser cut plexiglass, with a small chance to get one of their fabulous rare colours. With a robust line of modules planned in the future, full DIY kits and an open hardware licence we aim to make modular synthesis accessible and fun for the veteran and new user alike.
out of stock $38.15
People also bought...
Notes: The Blinkus is a cluster of LEDs that behaves kind of like a ring modulator. Every input is also an output and all inputs clamp each other to create weird wobbly cross-breeds of each other at the outputs. Oh yeah, and it blinks.
This is definitely one of Mystic Circuits' more experimental 0HPs but it isn't just a gag. The module has four jacks that all function as either inputs or outputs where all of the inputs clamp each other in different ways for each output. This means that you can have three voltage sources combined to one output, one voltage source can be turned into three different outputs, and and two inputs can create two different output signals. Each output is a weird wobbly version of all of the inputs, anything from ring modulated distortion to bizarre modulation shapes and logic gate functions.
… Read moreThis is definitely one of Mystic Circuits' more experimental 0HPs but it isn't just a gag. The module has four jacks that all function as either inputs or outputs where all of the inputs clamp each other in different ways for each output. This means that you can have three voltage sources combined to one output, one voltage source can be turned into three different outputs, and and two inputs can create two different output signals. Each output is a weird wobbly version of all of the inputs, anything from ring modulated distortion to bizarre modulation shapes and logic gate functions.
out of stock $29.58
People also bought...
Notes: The 0HP Butt0n from Mystic Circuits is a deceptively useful yet simple entry into the 0HP modular line. Two buttons that work in tandem to create a variety of switching behaviours. Use either the latching or momentary button to activate or deactivate two connected signals. Some clever routing also allows the latching button to change the momentary button from normally open to normally closed. Similar signal paths to Mystic Circuits' 0ttenuator module allow both channels to be used separately, two signals to be mixed together or one signal to be sent to two destinations.
… Read more 1 in stock $30.09
People also bought...
Notes: Dont let the name fool you, this module is quite a bit more than just an envelope. ePatch in a gate and your output will behave as a normal sustain- release envelope, staying high while the gate is high and slowly decaying once it goes low. Patch in audio and you have an envelope follower, extracting amplitude data from whatever signal is coming in. Patch in any positive control voltage and you have a slew, adding glide whenever the incoming voltage falls. All three modes boast voltage control over the release/ response time and can use the on board input mult to either daisy chain multiple envelopes or to extract amplitude data from an audio input and then send the audio somewhere else. Possibly Mystic Circuits' most useful 0HP module yet.
Whether you need some extra utilities for your studio behemoth or you need to save space on the road, 0HP gives you options. Mystic Circuits' modules come as a small circuit board mounted to a colorful piece of laser cut plexiglass, with a small chance to get one of Mystic Circuits' fabulous rare colours. With a robust line of modules planned in the future, full DIY kits and an open hardware licence we aim to make modular synthesis accessible and fun for the veteran and new user alike.
… Read moreWhether you need some extra utilities for your studio behemoth or you need to save space on the road, 0HP gives you options. Mystic Circuits' modules come as a small circuit board mounted to a colorful piece of laser cut plexiglass, with a small chance to get one of Mystic Circuits' fabulous rare colours. With a robust line of modules planned in the future, full DIY kits and an open hardware licence we aim to make modular synthesis accessible and fun for the veteran and new user alike.
1 in stock $38.92
People also bought...
Notes: An audio filter in a tiny package! A blend between Mystic Circuits' "AND - gate" and their "Vactrol Low Pass Gate" circuits, the cutoff frequency can be modulated at audio rate. It also features a voltage controlled clipping circuit which allows for further wave shaping. The response of this circuit is much faster than that of the Vactrol Low Pass Gate, so it will react to very plucky envelopes and even triggers.
Whether you need some extra utilities for your studio behemoth or you need to save space on the road, 0HP gives you options. Mystic Circuits' modules come as a small circuit board mounted to a colorful piece of laser cut plexiglass, with a small chance to get one of their fabulous rare colors. With a robust line of modules planned in the future, full DIY kits and an open hardware license we aim to make modular synthesis accessible and fun for the veteran and new user alike.
… Read moreWhether you need some extra utilities for your studio behemoth or you need to save space on the road, 0HP gives you options. Mystic Circuits' modules come as a small circuit board mounted to a colorful piece of laser cut plexiglass, with a small chance to get one of their fabulous rare colors. With a robust line of modules planned in the future, full DIY kits and an open hardware license we aim to make modular synthesis accessible and fun for the veteran and new user alike.
1 in stock $31.14
People also bought...
Notes: The 0HP OR Gate can be used to combine different signals, usually gate or clock signals. The output will give a high voltage whenever a high voltage is present at either of the inputs. This can be useful for combining multiple different gate sources together to trigger the same module, such as using a gate sequencer and a burst generator on a drum module to get drum fills. This module can also process fluctuating voltages, outputting the maximum of the two inputs (the highest of the input voltages above 0). The built in trigger converter outputs a spike whenever the main output transitions from low to high.
Whether you need some extra utilities for your studio behemoth or you need to save space on the road, 0HP gives you options. Mystic Circuits' modules come as a small circuit board mounted to a colorful piece of laser cut plexiglass, with a small chance to get one of Mystic Circuits' fabulous rare colours. With a robust line of modules planned in the future, full DIY kits and an open hardware licence, Mystic Circuits aim to make modular synthesis accessible and fun for the veteran and new user alike.
… Read moreWhether you need some extra utilities for your studio behemoth or you need to save space on the road, 0HP gives you options. Mystic Circuits' modules come as a small circuit board mounted to a colorful piece of laser cut plexiglass, with a small chance to get one of Mystic Circuits' fabulous rare colours. With a robust line of modules planned in the future, full DIY kits and an open hardware licence, Mystic Circuits aim to make modular synthesis accessible and fun for the veteran and new user alike.
out of stock $29.32
People also bought...
1010 Music 3.5mm TRS Patch Cables (pack of 5, 30cm) (TRS patch cable)
Cat: 877200 Rel: 25 May 22
A five pack of black TRS cables with male 3.5mm minijacks on either end of a 30cm/11.75 cable with 1010music printed on the jacks.
Notes: Use these black cables with the 1010music logo on either end of the jack to connect your 1010music eurorack modules to other modules that also use stereo minijack connections. This is a TRS cable with male 3.5mm minijacks on either end. It is available in two lengths: 30cm/11.75" and 60cm/23.5". These cables can be used for connections between any two 1010music modules, and to any other modules that use a compatible mapping of MIDI signals to stereo minijack connectors.
Weight: 0.04 lbs
Dimensions: 4 × 3.5 × 0.25 in
Length: 60 cm / 23.5"
Pack size: 5 Pack
… Read moreWeight: 0.04 lbs
Dimensions: 4 × 3.5 × 0.25 in
Length: 60 cm / 23.5"
Pack size: 5 Pack
2 in stock $28.01
People also bought...
1010 Music Bitbox MK1 & MK2 Replacement Faceplate (black) (replacement faceplate)
Cat: 882303 Rel: 29 Jun 22
Black Faceplate for Bitbox MK1 or MK2
Notes: You can now update your Bitbox mk1 or mk2 with a black faceplate. Now you can have an all black rack and have digital sampling capabilities. This is just the faceplate.
Give your module a facelift
These replacement faceplates are designed for use with the module in the traditional orientation with the screen on top. These are the same faceplates used when manufacturing our modules, but now in black. They are anodized aluminium with a bead blasted finish.
Swapping out a faceplate is easy to do, and requires a small wrench or pliers. Here are the steps to replace a faceplate:
Remove the module from the rack.
Use a small wrench or pliers to remove the small round nuts around each of the mini jacks. Note that these nuts have a notch on the top side of them. This notch fits into a specialized tool that can be used to remove these nuts more easily.
Gently tug on the four knobs to pull them off.
Use a small wrench or pliers to remove the hex nuts from the knob stems.
Remove the washers from the knob stems.
Gently pull up on the faceplate and it will slide off easily.
Place the new faceplate on the module.
Replace the washers on the knob stems.
Use a small wrench or pliers to replace the hex nuts on the knob stems.
Use a small wrench or pliers to replace the small round nuts around each of the mini jacks. Note that the notch should be on the top side of the nuts, the side away from the faceplate.
Look at the underside of the knobs and the post that they rest on. You will see that the knobs are keyed. Line up the flat edge of the hole in the knob with the flat edge of the post, and then push the knob onto the post. If you have the knob aligned properly, it should go on with moderate pressure. If it seems to require more force, please check the alignment.
Weight: 0.19 lbs
Dimensions: 5.5 × 5 × 0.25 in
Touchscreen product: bitbox, fxbox, synthbox, toolbox
… Read moreGive your module a facelift
These replacement faceplates are designed for use with the module in the traditional orientation with the screen on top. These are the same faceplates used when manufacturing our modules, but now in black. They are anodized aluminium with a bead blasted finish.
Swapping out a faceplate is easy to do, and requires a small wrench or pliers. Here are the steps to replace a faceplate:
Remove the module from the rack.
Use a small wrench or pliers to remove the small round nuts around each of the mini jacks. Note that these nuts have a notch on the top side of them. This notch fits into a specialized tool that can be used to remove these nuts more easily.
Gently tug on the four knobs to pull them off.
Use a small wrench or pliers to remove the hex nuts from the knob stems.
Remove the washers from the knob stems.
Gently pull up on the faceplate and it will slide off easily.
Place the new faceplate on the module.
Replace the washers on the knob stems.
Use a small wrench or pliers to replace the hex nuts on the knob stems.
Use a small wrench or pliers to replace the small round nuts around each of the mini jacks. Note that the notch should be on the top side of the nuts, the side away from the faceplate.
Look at the underside of the knobs and the post that they rest on. You will see that the knobs are keyed. Line up the flat edge of the hole in the knob with the flat edge of the post, and then push the knob onto the post. If you have the knob aligned properly, it should go on with moderate pressure. If it seems to require more force, please check the alignment.
Weight: 0.19 lbs
Dimensions: 5.5 × 5 × 0.25 in
Touchscreen product: bitbox, fxbox, synthbox, toolbox
2 in stock $31.66
People also bought...
Cat: 805961 Rel: 02 Feb 21
Pack of 15 green pach cables
Notes: Plug in and play with the 2hp Patch Cables! Available in multiple sizes and bundles, these 2hp color-certified green cables will bring the pop to your system in a sleek, tiny package. Designed to work with 2hp's tiny modules, the 2hp Patch Cables will comfortably fit into the most crowded corners of your system, big or small!
Sleek, tiny package
Lunchbox cables
… Read moreSleek, tiny package
Lunchbox cables
out of stock $26.98
People also bought...
4ms Bus Stick With 13 Connectors & Bare Headers (bus stick)
Cat: 720434 Rel: 11 Feb 19
Bus stick, unshrouded
Notes: Bus Sticks are low-profile, small footprint power distribution boards for powering up to 13 modules using un-shrouded headers. Simply connect to a Row Power module using the included cable. Attaches to your case using adhesive pads (included) or by drilling and screwing.
… Read moreout of stock $33.22
People also bought...
Cat: 720435 Rel: 11 Feb 19
Bus stick, shrouded
Notes: Bus Sticks are low-profile, small footprint power distribution boards for powering up to 13 modules using shrouded (keyed) headers. Simply connect to a Row Power module using the included cable. Attaches to your case using adhesive pads (included) or by drilling and screwing.
… Read more 1 in stock $44.38
Click for better price!
or call +44 20 7424 1960
quote 720435
quote 720435
People also bought...
4ms Pod20 20HP Unpowered Synth Module Enclosure Case (black) (synth module enclosure case)
Cat: 706833 Rel: 12 Dec 18
20HP metal enclosure for Eurorack modules
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.
The Pod20 Unpowered is 20HP with 1.34" (34mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.
… Read moreThe Pod20 Unpowered is 20HP with 1.34" (34mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.
out of stock $46.71
People also bought...
4ms Pod26 26HP Unpowered Synth Module Enclosure Case (black) (synth module enclosure case)
Cat: 706836 Rel: 12 Dec 18
26HP metal enclosure for Eurorack modules
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.
The Pod26 Unpowered is 26HP with 1.34" (34mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.
… Read moreThe Pod26 Unpowered is 26HP with 1.34" (34mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.
out of stock $48.77
People also bought...
Accutronics Medium Spring Reverb Tank For Intellijel Springray (spring reverb tank)
Cat: 563702 Rel: 09 Mar 15
Spring reverb tank for Intellijel Springray module, medium size
Notes: Medium sized spring reverb tank, Type 8 Accutronics 8BB2C1B with 3×1 springs and medium decay (1.75 - 3 seconds).
Input impedance 190 Ohm, output impedance 2575 Ohm. Input connector insulated, output connector grounded.
… Read moreInput impedance 190 Ohm, output impedance 2575 Ohm. Input connector insulated, output connector grounded.
out of stock $41.00
People also bought...
AE Modular 1-Row 20x1 Wide Module Case (synth module case)
Cat: 786525 Rel: 19 Oct 20
20x1 rack case for Tangiible Waves AE Modular
Notes: The 1-row rack for AE modular is 20 units wide; two of them are used by the MASTER module so you have 18U remaining for other modules.
Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.
Dimensions:51.5 x 11.2 x 4.5 cm (width x depth x height)
… Read moreVia a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.
Dimensions:51.5 x 11.2 x 4.5 cm (width x depth x height)
out of stock $34.24
People also bought...
AE Modular 12U Eurorack Adapter Frame (Eurorack adapter frame)
Cat: 719730 Rel: 03 Sep 19
AE modular Eurorack adapter frame
Notes: The AE modular Eurorack adapter frame allows to integrate AE modular modules into Eurorack systems. It is basically an empty Eurorack-sized frame that can take up to 12 units of AE modules where two units are occupied by the mandatory MASTER module. Via the MASTER module the frame is powered from the Eurorack bus.
The product includes:
- The mounting frame with screws for mounting the AE modules
- The ribbon cable for Eurorack bus connection
- The bus cable
… Read moreThe product includes:
- The mounting frame with screws for mounting the AE modules
- The ribbon cable for Eurorack bus connection
- The bus cable
out of stock $28.55
People also bought...
AE Modular 2-Row 12x2 Narrow Case (synth module case)
Cat: 786519 Rel: 19 Oct 20
12x2 narrow case for Tangible Waves AE modular
Notes: This 2-row rack for AE modular is 12 units wide with 2 rows; the MASTER module consumes 2 units so you have 22U remaining for other modules.
Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.
Dimensions: 31,1 x 21.7 x 4.5 cm (width x depth x height)
… Read moreVia a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.
Dimensions: 31,1 x 21.7 x 4.5 cm (width x depth x height)
out of stock $43.33
People also bought...
AE Modular 2-Row 12x2 Narrow Case (B-STOCK) (synth module case)
Cat: 936906 Rel: 19 Oct 20
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***
This 2-row rack for AE modular is 12 units wide with 2 rows; the MASTER module consumes 2 units so you have 22U remaining for other modules.
Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.
Dimensions: 31,1 x 21.7 x 4.5 cm (width x depth x height)
… Read moreThis 2-row rack for AE modular is 12 units wide with 2 rows; the MASTER module consumes 2 units so you have 22U remaining for other modules.
Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.
Dimensions: 31,1 x 21.7 x 4.5 cm (width x depth x height)
out of stock $32.74
People also bought...
AE Modular 8U Eurorack Adapter Frame (Eurorack adapter frame)
Cat: 719727 Rel: 03 Sep 19
AE modular Eurorack adapter frame
Notes: The AE modular Eurorack adapter frame allows to integrate AE modular modules into Eurorack systems. It is basically an empty Eurorack-sized frame that can take up to 8 units of AE modules where two units are occupied by the mandatory MASTER module. Via the MASTER module the frame is powered from the Eurorack bus.
The product includes:
- The mounting frame with screws for mounting the AE modules
- The ribbon cable for Eurorack bus connection
- The bus cable
… Read moreThe product includes:
- The mounting frame with screws for mounting the AE modules
- The ribbon cable for Eurorack bus connection
- The bus cable
out of stock $23.88
People also bought...
ALM M3 6mm Modular Synthesiser Case Mount Screws (pack of 100) (modular syntheiser mount screws)
Cat: 911511 Rel: 16 Nov 22
Custom ALM finger friendly case mount screws sized M3 with a 6mm depth.
Notes: Custom ALM finger friendly case mount screws sized M3 with a 6mm depth.
No screwdriver necessary - makes your daily case rearranging ritual even easier!
These low profile and stylish screws stay out of hands way and will fit underneath a Decksaver lid with ALM cases.
Available in boxes of 100 screws.
… Read moreNo screwdriver necessary - makes your daily case rearranging ritual even easier!
These low profile and stylish screws stay out of hands way and will fit underneath a Decksaver lid with ALM cases.
Available in boxes of 100 screws.
4 in stock $30.88
People also bought...
Analogue Solutions 150cm CV LED Patch Cables (pack of 5) (CV LED patch cables)
Cat: 839534 Rel: 28 Jul 21
Pack of 5 150cm CV LED patch cables
Notes: 5 x LED CV cables - mono mini jack- ideal for Eurorack.
These will light red / green as the signal swings from a positive to negative voltage.
The colours are swapped for each end:
Jack 1: red / green (+/-), Jack 2: green / red (+/-).
Expect a very small drop in signal power! Light requires energy! However, in most applications, you will not notice any drop.
The cables are slightly translucent and you can see the core of the cable. Material is a soft touch rubber that is presently flexible.
Plugs are embossed with the words ANALOGUE SOLUTIONS and also the logo.
These don't just look pretty, they have practical advantages too:
Help seeing what's going on in the dark!
Help diagnose signal flow.
… Read moreThese will light red / green as the signal swings from a positive to negative voltage.
The colours are swapped for each end:
Jack 1: red / green (+/-), Jack 2: green / red (+/-).
Expect a very small drop in signal power! Light requires energy! However, in most applications, you will not notice any drop.
The cables are slightly translucent and you can see the core of the cable. Material is a soft touch rubber that is presently flexible.
Plugs are embossed with the words ANALOGUE SOLUTIONS and also the logo.
These don't just look pretty, they have practical advantages too:
Help seeing what's going on in the dark!
Help diagnose signal flow.
out of stock $44.38
People also bought...
Analogue Solutions 30cm CV LED Patch Cables (pack of 5) (CV LED Patch Cables)
Cat: 839523 Rel: 28 Jul 21
Pack of 5 30cm CV LED patch cables
Notes: 5 x LED CV cables - mono mini jack- ideal for Eurorack.
These will light red / green as the signal swings from a positive to negative voltage.
The colours are swapped for each end:
Jack 1: red / green (+/-), Jack 2: green / red (+/-).
Expect a very small drop in signal power! Light requires energy! However, in most applications, you will not notice any drop.
The cables are slightly translucent and you can see the core of the cable. Material is a soft touch rubber that is presently flexible.
Plugs are embossed with the words ANALOGUE SOLUTIONS and also the logo.
These don't just look pretty, they have practical advantages too:
Help seeing what's going on in the dark!
Help diagnose signal flow.
… Read moreThese will light red / green as the signal swings from a positive to negative voltage.
The colours are swapped for each end:
Jack 1: red / green (+/-), Jack 2: green / red (+/-).
Expect a very small drop in signal power! Light requires energy! However, in most applications, you will not notice any drop.
The cables are slightly translucent and you can see the core of the cable. Material is a soft touch rubber that is presently flexible.
Plugs are embossed with the words ANALOGUE SOLUTIONS and also the logo.
These don't just look pretty, they have practical advantages too:
Help seeing what's going on in the dark!
Help diagnose signal flow.
out of stock $48.00
People also bought...
Analogue Solutions 60cm CV LED Patch Cables (pack of 5) (CV LED patch cables)
Cat: 839530 Rel: 28 Jul 21
Pack of 5 60cm CV LED patch cables
Notes: 5 x LED CV cables - mono mini jack- ideal for Eurorack.
These will light red / green as the signal swings from a positive to negative voltage.
The colours are swapped for each end:
Jack 1: red / green (+/-), Jack 2: green / red (+/-).
Expect a very small drop in signal power! Light requires energy! However, in most applications, you will not notice any drop.
The cables are slightly translucent and you can see the core of the cable. Material is a soft touch rubber that is presently flexible.
Plugs are embossed with the words ANALOGUE SOLUTIONS and also the logo.
These don't just look pretty, they have practical advantages too:
Help seeing what's going on in the dark!
Help diagnose signal flow.
… Read moreThese will light red / green as the signal swings from a positive to negative voltage.
The colours are swapped for each end:
Jack 1: red / green (+/-), Jack 2: green / red (+/-).
Expect a very small drop in signal power! Light requires energy! However, in most applications, you will not notice any drop.
The cables are slightly translucent and you can see the core of the cable. Material is a soft touch rubber that is presently flexible.
Plugs are embossed with the words ANALOGUE SOLUTIONS and also the logo.
These don't just look pretty, they have practical advantages too:
Help seeing what's going on in the dark!
Help diagnose signal flow.
out of stock $48.26
People also bought...
Analogue Solutions 90cm CV LED Patch Cables (pack of 5) (CV LED patch cables)
Cat: 839533 Rel: 28 Jul 21
Pack of 5 90cm CV LED patch cables
Notes: 5 x LED CV cables - mono mini jack- ideal for Eurorack.
These will light red / green as the signal swings from a positive to negative voltage.
The colours are swapped for each end:
Jack 1: red / green (+/-), Jack 2: green / red (+/-).
Expect a very small drop in signal power! Light requires energy! However, in most applications, you will not notice any drop.
The cables are slightly translucent and you can see the core of the cable. Material is a soft touch rubber that is presently flexible.
Plugs are embossed with the words ANALOGUE SOLUTIONS and also the logo.
These don't just look pretty, they have practical advantages too:
Help seeing what's going on in the dark!
Help diagnose signal flow.
… Read moreThese will light red / green as the signal swings from a positive to negative voltage.
The colours are swapped for each end:
Jack 1: red / green (+/-), Jack 2: green / red (+/-).
Expect a very small drop in signal power! Light requires energy! However, in most applications, you will not notice any drop.
The cables are slightly translucent and you can see the core of the cable. Material is a soft touch rubber that is presently flexible.
Plugs are embossed with the words ANALOGUE SOLUTIONS and also the logo.
These don't just look pretty, they have practical advantages too:
Help seeing what's going on in the dark!
Help diagnose signal flow.
out of stock $41.51
People also bought...
Analogue Solutions LED CV Jack Pins (pack of 5) (LED jack pins - mono mini jack)
Cat: 860633 Rel: 13 Jan 22
5 x LED jack pins - mono mini jack. Ideal for Eurorack.
Notes: Branded Analogue Solutions LED Jack Pins.
These will light red / green as the signal swings from a positive to negative voltage.
Use the for diagnostics - or, just because they look cool (especially in the dark!)
The plugs are slightly translucent and you can see the core of the cable. Material is a soft touch rubber that is presently flexible.
Plugs are embossed with the words ANALOGUE SOLUTIONS and also the logo.
These don't just look pretty - they have practical advantages too!
Help seeing what's going on in the dark!
Help diagnose signal flow.
… Read moreThese will light red / green as the signal swings from a positive to negative voltage.
Use the for diagnostics - or, just because they look cool (especially in the dark!)
The plugs are slightly translucent and you can see the core of the cable. Material is a soft touch rubber that is presently flexible.
Plugs are embossed with the words ANALOGUE SOLUTIONS and also the logo.
These don't just look pretty - they have practical advantages too!
Help seeing what's going on in the dark!
Help diagnose signal flow.
1 in stock $29.06
People also bought...
Befaco M2.5 Knurlies Synth Module Screws (pack of 100) (synth module screws)
Cat: 699920 Rel: 06 Nov 18
Pack of 100 Knurlies Eurorack M2.5 rack screws
Notes: 100 of Befaco's unique screws designed specifically for Eurorack. These M2.5 screws can be secured by hand, all common screwdrivers and Allen Key. These are great for saving time when rearranging your synth.
Each Knurlie comes with a fitted plastic washer to prevent rack rash.
… Read moreEach Knurlie comes with a fitted plastic washer to prevent rack rash.
out of stock $40.22
People also bought...
Befaco M2.5 Knurlies Synth Module Screws With Washers (pack of 50) (synth module screws)
Cat: 699919 Rel: 06 Nov 18
Pack of 50 Knurlies Eurorack M2.5 rack screws
Notes: 50 of Befaco's unique screws designed specifically for Eurorack. These M2.5 screws can be secured by hand, all common screwdrivers and Allen Key. These are great for saving time when rearranging your synth.
Each Knurlie comes with a fitted plastic washer to prevent rack rash.
… Read moreEach Knurlie comes with a fitted plastic washer to prevent rack rash.
out of stock $20.24
People also bought...
Befaco M3 Knurlies Synth Module Screws (pack of 100) (synth module screws)
Cat: 668667 Rel: 09 Nov 17
Pack of 100 screws specially designed for Eurorack
Notes: Knurlies are the first screws specially designed for Eurorack - engineered with love by Befaco to make re-arranging your case a matter of minutes!
Knurlies can be fastened by hand, phillips, slot or allen, and include plastic washers to avoid rack-rash.
These screws are M3x7mm, so they can also be used on 3mm thick panels as well as regular 2mm ones.
… Read moreKnurlies can be fastened by hand, phillips, slot or allen, and include plastic washers to avoid rack-rash.
These screws are M3x7mm, so they can also be used on 3mm thick panels as well as regular 2mm ones.
out of stock $40.22
People also bought...
Befaco M3 Knurlies Synth Module Screws (pack of 50) (synth module screws)
Cat: 668668 Rel: 09 Nov 17
Pack of 50 screws specially designed for Eurorack
Notes: Knurlies are the first screws specially designed for Eurorack - engineered with love by Befaco to make re-arranging your case a matter of minutes!
Knurlies can be fastened by hand, phillips, slot or allen, and include plastic washers to avoid rack-rash.
These screws are M3x7mm, so they can also be used on 3mm thick panels as well as regular 2mm ones.
… Read moreKnurlies can be fastened by hand, phillips, slot or allen, and include plastic washers to avoid rack-rash.
These screws are M3x7mm, so they can also be used on 3mm thick panels as well as regular 2mm ones.
out of stock $22.32
People also bought...
Cat: 929638 Rel: 19 May 23
Black patch cables, 5x pack, assorted lengths.
Notes: Bocuma's own line of patch cables. Pack of 5 high quality cables, 3.5mm.
Available in packs of gray or black.
Each package includes:
2x 30cm
2x 60cm
1x 90cm
A good system requires a diet rich in NUDOLS: Organic Patch Cables.
… Read moreAvailable in packs of gray or black.
Each package includes:
2x 30cm
2x 60cm
1x 90cm
A good system requires a diet rich in NUDOLS: Organic Patch Cables.
1 in stock $24.70
People also bought...
Cat: 929630 Rel: 19 May 23
Grey patch cables, 5x pack, assorted lengths.
Notes: Bocuma's own line of patch cables. Pack of 5 high quality cables, 3.5mm.
Available in packs of gray or black.
Each package includes:
2x 30cm
2x 60cm
1x 90cm
A good system requires a diet rich in NUDOLS: Organic Patch Cables.
… Read moreAvailable in packs of gray or black.
Each package includes:
2x 30cm
2x 60cm
1x 90cm
A good system requires a diet rich in NUDOLS: Organic Patch Cables.
1 in stock $24.70
People also bought...
BoredBrain 12ft Optical Cable (pair) (2 x optical cable)
Cat: 846139 Rel: 28 Sep 21
Optical cable 2 pack
Notes: 2 x digital lightpipe optical audio cables
… Read moreout of stock $24.14
People also bought...
Notes: Digital lightpipe optical audio cable.
… Read moreout of stock $31.13
People also bought...
Cre8audio NiftyCASE BigEARS Stand (NiftyCASE stand)
Cat: 839517 Rel: 08 Nov 21
A slick way to put 2 NiftyCASES together and make a Nifty Stack for double your NiftyCASE fun.
Notes: The Cre8audio NiftyCASE BigEARS is the simplest solution for expanding your modular Eurorack synthesizer, by allowing you to connect two Cre8audio NiftyCASE's together seamlessly. Elegant and classy, the BigEARS is made from wood to match the design and aesthetic of the NiftyCASE to create a cohesive look, while providing an immense amount of stability and rigidity. When two cases are connected, you'll have a huge 168HP of rack space to add to your collection that can unlock your true creative potential.
… Read more 2 in stock $42.82
Click for better price!
or call +44 20 7424 1960
quote 839517
quote 839517
People also bought...
Decksaver Behringer Eurorack Go Dust Cover (modular synthesiser case dust cover)
Cat: 862508 Rel: 10 Mar 22
Smoked polycarbonate cover for Behringer Eurorack Go
Notes: The tools we use to compose and produce music are dear to our hearts.
Dust, liquid and accidental impact have taken many a good modular synth down over the years - this is where Decksaver steps in.
Precision designed and trimmed for a perfect fit, whilst still accommodating cables, the Eurorack Go can sit ready for operation.
This cover is designed with additional clearance for patch cables, meaning you can leave your cables in place when travelling or protecting your modular setup in the studio.
Shields delicate controls and internal components from damage at home, on the road and on stage.
Dimensions
Weight: 1.35kg
Length: 72.6cm
Width: 31.2cm
Height: 8.2cm
… Read moreDust, liquid and accidental impact have taken many a good modular synth down over the years - this is where Decksaver steps in.
Precision designed and trimmed for a perfect fit, whilst still accommodating cables, the Eurorack Go can sit ready for operation.
This cover is designed with additional clearance for patch cables, meaning you can leave your cables in place when travelling or protecting your modular setup in the studio.
Shields delicate controls and internal components from damage at home, on the road and on stage.
Dimensions
Weight: 1.35kg
Length: 72.6cm
Width: 31.2cm
Height: 8.2cm
2 in stock $47.23
Click for better price!
or call +44 20 7424 1960
quote 862508
quote 862508
People also bought...
Decksaver Behringer Eurorack Go Dust Cover (smoked clear) (B-STOCK) (modular synthesiser case dust cover)
Cat: 919533 Rel: 10 Mar 22
B-STOCK: Scratches on unit, refurbished
Notes: ***B-STOCK: Scratches on unit, refurbished***
The tools we use to compose and produce music are dear to our hearts.
Dust, liquid and accidental impact have taken many a good modular synth down over the years - this is where Decksaver steps in.
Precision designed and trimmed for a perfect fit, whilst still accommodating cables, the Eurorack Go can sit ready for operation.
This cover is designed with additional clearance for patch cables, meaning you can leave your cables in place when travelling or protecting your modular setup in the studio.
Shields delicate controls and internal components from damage at home, on the road and on stage.
Dimensions
Weight: 1.35kg
Length: 72.6cm
Width: 31.2cm
Height: 8.2cm
… Read moreThe tools we use to compose and produce music are dear to our hearts.
Dust, liquid and accidental impact have taken many a good modular synth down over the years - this is where Decksaver steps in.
Precision designed and trimmed for a perfect fit, whilst still accommodating cables, the Eurorack Go can sit ready for operation.
This cover is designed with additional clearance for patch cables, meaning you can leave your cables in place when travelling or protecting your modular setup in the studio.
Shields delicate controls and internal components from damage at home, on the road and on stage.
Dimensions
Weight: 1.35kg
Length: 72.6cm
Width: 31.2cm
Height: 8.2cm
out of stock $47.23
People also bought...
Doepfer A-100B42v Vintage Blank Panel 42TE (black) (blank panel)
Cat: 731212 Rel: 29 May 19
Robust, blank front panel for use with modular racks & other applications - 42HP wide
Notes: Blank panel, 42HP, constructed from anodised aluminium, black.
… Read moreout of stock $22.06
People also bought...
Cat: 755436 Rel: 12 Nov 19
Passive Eurorack bus board
Notes: The A-100BUS from Doepfer is a simple passive busboard for use with Eurorack modules. It features 14 power headers along with three sets of spade terminals for connection to power supplies such as the Doepfer PSU3 and daisy-chaining with other A-100 bus boards.
… Read moreout of stock $42.56
People also bought...
Cat: 763100 Rel: 31 Jan 20
Notes: Bus board to connect 14 modules
An assembled and tested bus board, 22 sockets, e.g. for customers who want to built their own case and need a bus board for A-100 modules, includes cables for connection to +/-12V power supply (4 wires with flat connectors on both ends, length about 30cm), but no mechanical parts (e.g. screws, spacers, nuts, washers).
In the new version of the A-100 bus board (labeled Version 6 / 2019) boxed pin headers are used which are equipped with a reverse protection (gap for the "nose" of the socket of the bus cable). When the bus cable coming from the module is connected to the boxed header in question the "nose" has to point to the right. The polarity of the cable is correct if the red wire of the bus cable then points to the bottom (to the continuous line labeled"RED WIRE" on the pc board). If this is not the case please do not connect the module to the bus board ! Otherwise both the module and the power supply (A-100PSU3) may be damaged ! In that case please contact the manufacturer of the module and ask for a suitable bus cable with the correct polarity of the connector.
The bus cables of original A-100 modules manufactured by Doepfer are equipped with suitable bus cables since 2012. Only for older A-100 modules manufactured before 2012 it may happen that the polarity of the 16 pin female connector of the bus cable is wrong (nose points to the left when red wire points to the bottom). This is because in the past unboxed pin headers were used and the position of the "nose" did not matter. In such a case please contact Doepfer or one of their dealers and order a suitable bus cable.
… Read moreAn assembled and tested bus board, 22 sockets, e.g. for customers who want to built their own case and need a bus board for A-100 modules, includes cables for connection to +/-12V power supply (4 wires with flat connectors on both ends, length about 30cm), but no mechanical parts (e.g. screws, spacers, nuts, washers).
In the new version of the A-100 bus board (labeled Version 6 / 2019) boxed pin headers are used which are equipped with a reverse protection (gap for the "nose" of the socket of the bus cable). When the bus cable coming from the module is connected to the boxed header in question the "nose" has to point to the right. The polarity of the cable is correct if the red wire of the bus cable then points to the bottom (to the continuous line labeled"RED WIRE" on the pc board). If this is not the case please do not connect the module to the bus board ! Otherwise both the module and the power supply (A-100PSU3) may be damaged ! In that case please contact the manufacturer of the module and ask for a suitable bus cable with the correct polarity of the connector.
The bus cables of original A-100 modules manufactured by Doepfer are equipped with suitable bus cables since 2012. Only for older A-100 modules manufactured before 2012 it may happen that the polarity of the 16 pin female connector of the bus cable is wrong (nose points to the left when red wire points to the bottom). This is because in the past unboxed pin headers were used and the position of the "nose" did not matter. In such a case please contact Doepfer or one of their dealers and order a suitable bus cable.
1 in stock $36.07
People also bought...
Doepfer A-100MNT Mini Power Supply & Bus Board For Eurorack (power supply/bus board)
Cat: 755435 Rel: 12 Nov 19
Miniature PSU/bus board
Notes: The A-100 MNT (Mini power supply/bus) is composed of a miniature power supply and system bus, with connectors for four modules. It's designed to be used with a small set-up of just a few modules, in your own custom-designed case. The idea is that then you can use individual A-100 modules - for instance the filters, the filterbank, frequency shifter, sampler, MIDI interface, etc. - as free-standing pieces of equipment, which can easily be integrated with your other instruments or recording equipment.
The power supply provides the usual A-100 system requirements of +12 V and -12 V, and an additional +5 V supply, for the few modules (for instance A-190, A-191) which need it. The maximum current loading capacity totals 100 mA for +/- 12 V and/or 50 mA for the +5 V supply.
The system bus provides connections for four System A-100 modules. As well as the power supply, it also carries "INT.CV" and "INT.GATE" connections (see A-100 manual, main introduction, chapter 3, 'The A-100 signal flow'.).
The A-100 MNT is supplied as standard with an external power supply, which has to be connected to the socket on the MNT's circuit board.
… Read moreThe power supply provides the usual A-100 system requirements of +12 V and -12 V, and an additional +5 V supply, for the few modules (for instance A-190, A-191) which need it. The maximum current loading capacity totals 100 mA for +/- 12 V and/or 50 mA for the +5 V supply.
The system bus provides connections for four System A-100 modules. As well as the power supply, it also carries "INT.CV" and "INT.GATE" connections (see A-100 manual, main introduction, chapter 3, 'The A-100 signal flow'.).
The A-100 MNT is supplied as standard with an external power supply, which has to be connected to the socket on the MNT's circuit board.
out of stock $46.69
People also bought...
ElectroSmith Daisy Patch Submodule Eurorack DSP Development Board (synth module DSP development board)
Cat: 862806 Rel: 21 Mar 22
The Daisy Patch Submodule is a DSP platform for Eurorack synthesizer modules.
Notes: The Daisy Patch Submodule is a DSP platform for Eurorack synthesizer modules. It features a lightning fast STM32 processor, high fidelity stereo audio codec, and enough RAM for 10 minute long buffers - all with standard signal levels and conditioning for the Eurorack ecosystem.
Simply design your carrier board, and let the Patch Submodule do the rest!
Programming is a breeze with support for C++, Max/MSP Gen~, Pure Data, Arduino, and more. These languages can be coupled with our open source DSP library, DaisySP, for a powerful music synthesis programming environment.
Create your dream Eurorack module with the Daisy Patch SM!
STM32 processor at 480MHz, 96kHz / 24-bit audio, RAM for up to 10 minute audio buffers
Stereo audio IO, x12 ADC inputs ( 16-bit bipolar CV or potentiometer), x2 CV outputs (12-bit), x2 gate inputs, x2 gate outputs, x12 GPIO
Flash firmware over USB via open source web programmer
Support for SDDMC, SPI, UART, I2C, and USB
FCC / CE Tested and Compliant
… Read moreSimply design your carrier board, and let the Patch Submodule do the rest!
Programming is a breeze with support for C++, Max/MSP Gen~, Pure Data, Arduino, and more. These languages can be coupled with our open source DSP library, DaisySP, for a powerful music synthesis programming environment.
Create your dream Eurorack module with the Daisy Patch SM!
STM32 processor at 480MHz, 96kHz / 24-bit audio, RAM for up to 10 minute audio buffers
Stereo audio IO, x12 ADC inputs ( 16-bit bipolar CV or potentiometer), x2 CV outputs (12-bit), x2 gate inputs, x2 gate outputs, x12 GPIO
Flash firmware over USB via open source web programmer
Support for SDDMC, SPI, UART, I2C, and USB
FCC / CE Tested and Compliant
2 in stock $34.51
People also bought...
Endorphin.esTrippy Cables 3.5mm Mono Patch Cables (red/black/mint, 15cm/30cm/50cm/75cm, pack of 13) (patch cables)
Cat: 805633 Rel: 14 Dec 20
Set of 13 patch cables
Notes: Small set of 3.5 mm patch cables (mono). Shielded, gold plated pins, TPE isolation.
4x 15 cm red
3x 30 cm black
3x 50 cm red
3x 50 cm black
Comes with 1 extra green 80cm cable
… Read more4x 15 cm red
3x 30 cm black
3x 50 cm red
3x 50 cm black
Comes with 1 extra green 80cm cable
out of stock $36.59
People also bought...
Erica Synths 6.3mm Studio/MOTM Patch Cable Holder (30cm) (patch cable holder)
Cat: 829458 Rel: 07 Jun 21
Patch cable holder
Notes: Rigid, 2mm aluminium powder coated and 300mm wide studio cable holder can host over 80 studio cables in perfect order! Two screws for fixing the cable holder are included.
… Read more 1 in stock $27.76
People also bought...
Erica Synths Black Wavetable VCO Bank ROM 3 Chip (memory chip)
Cat: 821337 Rel: 08 Apr 21
Read-only memory chip that provides 8 custom wavetables
Notes: A third Black Wavetable VCO expansion ROM chip brings you 8 great sounding custom wavetables and a whole new palette of sounds for your Black Wavetable VCO.
The new wavetables are: Computer Organ 1, Computer Organ 2, Nasal Cyborg, Sine Pairs, Spiky FM, Sliced Sine, Stabbed sine and AM Sweep. Wavetables are made in collaboration with Galbanum.
The installation of the new chip is plug and play - just insert it the free slot on the back of the Black Wavetable VCO (pay attention to the orientation of the chip) and the VCO will automatically identify it. The first LED blinking will signal that you are selecting wavetables from the third ROM chip.
… Read moreThe new wavetables are: Computer Organ 1, Computer Organ 2, Nasal Cyborg, Sine Pairs, Spiky FM, Sliced Sine, Stabbed sine and AM Sweep. Wavetables are made in collaboration with Galbanum.
The installation of the new chip is plug and play - just insert it the free slot on the back of the Black Wavetable VCO (pay attention to the orientation of the chip) and the VCO will automatically identify it. The first LED blinking will signal that you are selecting wavetables from the third ROM chip.
out of stock $27.76
People also bought...
Erica Synths Patch Cable Holder (20cm) (patch cable holder)
Cat: 758855 Rel: 05 Dec 19
Patch cable holder
Notes: We wanted to organize patch cables that were hanging on all possible objects in our Lab, therefore we decided to make patch cable holders.
Rigid, 2mm aluminium powder coated cable holders can host over 100 patch cables in perfect order! Two screws for fixing the cable holder are included.
… Read moreRigid, 2mm aluminium powder coated cable holders can host over 100 patch cables in perfect order! Two screws for fixing the cable holder are included.
1 in stock $22.32
People also bought...
Erica Synths Patch Cable Holder (30cm) (patch cable holder)
Cat: 755444 Rel: 05 Nov 19
Patch cable holder
Notes: We wanted to organize patch cables that were hanging on all possible objects in our Lab, therefore we decided to make patch cable holders.
Rigid, 2mm aluminium powder coated cable holders can host over 100 patch cables in perfect order! Two screws for fixing the cable holder are included.
… Read moreRigid, 2mm aluminium powder coated cable holders can host over 100 patch cables in perfect order! Two screws for fixing the cable holder are included.
out of stock $28.01
People also bought...
Erica Synths Pico Drum Programmer (drum programmer)
Cat: 686691 Rel: 27 Apr 18
Companion board for uploading your samples to Pico Drums
Notes: If you wish to upload your own drum samples to Pico Drum module, you'll need the Pico Drum Programmer. Please refer to the Pico Drum user manual for sample upload instructions via a plug in for the Google Chrome browser.
- 5 pin header connects with the module, USB header connects with the computer
- USB cable is not included
… Read more- 5 pin header connects with the module, USB header connects with the computer
- USB cable is not included
out of stock $21.80
People also bought...
Erica Synths SYNTRX Rack Ears (pair) (synth module enclosure case rack ears)
Cat: 829512 Rel: 24 Jan 22
Rack ears for SYNTRX
Notes: Rack ears to install your SYNTRX in a studio deck.
Replace wooden side panels with rack ears and integrate the SYNTRX in your studio rack.
… Read moreReplace wooden side panels with rack ears and integrate the SYNTRX in your studio rack.
1 in stock $27.40
People also bought...
Cat: 670820 Rel: 20 Nov 17
8 x patch cables, 6.3mm TRS to same, 3ft
Notes: These cables are designed to interconnect pro audio gear with balanced phone jacks. They are ideal for use with balanced phone patch bays. Features include:
- Nickel-plated plugs for rugged durability and efficient signal transfer
- Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
- OFC spiral shields for effective EMI and RFI rejection and flexibility
Connectors: 1/4 in TRS to Same
Conductors: 26 AWG x 2 OFC
Shield: 85% OFC Spiral
Quantity: 8 pc
… Read more- Nickel-plated plugs for rugged durability and efficient signal transfer
- Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
- OFC spiral shields for effective EMI and RFI rejection and flexibility
Connectors: 1/4 in TRS to Same
Conductors: 26 AWG x 2 OFC
Shield: 85% OFC Spiral
Quantity: 8 pc
2 in stock $24.29
