100% Sicheres Einkaufen

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Sicheres Einkaufen

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Synth module accessories

View:
Options
Artikel 1 bis 34 von 34 auf Seite 1 von 1 anzeigen
FORTHCOMING
ALM Pamela's Discotheque Analogue DIN Sync Clock Device For Use With Pioneer CDJ's
coming soon TBA
FORTHCOMING
Boredbrain Splix 3.5mm Inline Splitter Mixer (amethyst purple)
Cat: 725975
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
coming soon $13.24
FORTHCOMING
Boredbrain Splix 3.5mm Inline Splitter Mixer (astral white)
Cat: 725970
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
coming soon $13.24
FORTHCOMING
Boredbrain Splix 3.5mm Inline Splitter Mixer (dark graphite)
Cat: 725978
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
coming soon $13.24
FORTHCOMING
Boredbrain Splix 3.5mm Inline Splitter Mixer (moon grey)
Cat: 725974
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
coming soon $13.24
FORTHCOMING
Boredbrain Splix 3.5mm Inline Splitter Mixer (nuclear yellow)
Cat: 725969
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
coming soon $13.24
FORTHCOMING
Boredbrain Splix 3.5mm Inline Splitter Mixer (oblivion black)
Cat: 725971
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
coming soon $13.24
FORTHCOMING
Boredbrain Splix 3.5mm Inline Splitter Mixer (plasmic pink)
Cat: 725965
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
coming soon $13.24
FORTHCOMING
Boredbrain Splix 3.5mm Inline Splitter Mixer (quantum blue)
Cat: 725967
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
coming soon $13.24
FORTHCOMING
Boredbrain Splix 3.5mm Inline Splitter Mixer (slime green)
Cat: 725964
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
coming soon $13.24
FORTHCOMING
Boredbrain Splix 3.5mm Inline Splitter Mixer (solar orange)
Cat: 725976
 
Passive 1 to 2 splitter or 2 to 1 mixer
Notes: Whether you are mixing control voltage signals for more interesting modulations or just copying an audio signal for parallel processing, SPLIX is a handy addition to your arsenal of Eurorack tools.

Functioning as either a mixer or splitter, its small lightweight form-factor means it can fit nearly anywhere without weighing down your patch. The thumb-wheel controls the crossfader balance of two inputs, or the level ratio between two outputs. SPLIX also functions as a passive inline attenuator when using only one input and one output.
Read more
coming soon $13.24
FORTHCOMING
Doepfer A-100B2v Vintage Blank Panel 2TE (black)
Cat: 731209
 
vintage aluminium panel
Notes: The Doepfer Blank Panel 2TE is a sleek, and robust panel designed for use with modular racks and other applications. The 2mm anodised aluminium construction ensures optimal durability and strength. The Doepfer Blank Panel boasts a width of 2HP and a height of 10mm. It's simple yet durable design is ideal for a range of racks and modular setups.
Read more
coming soon $5.56
FORTHCOMING
Doepfer A-100B42v Vintage Blank Panel 42TE (black)
coming soon $17.75
FORTHCOMING
Doepfer A-100B4v Vintage Blank Panel 4TE (black)
Cat: 731210
 
vintage blank panel
coming soon $6.62
FORTHCOMING
Doepfer A-100B8v Vintage Blank Panel 8TE (black)
coming soon $6.89
FORTHCOMING
Future Retro Flying Bus Cable
coming soon $9.52
FORTHCOMING
Pittsburgh Modular Lifeforms Research Console Angled Desktop Eurorack Case
coming soon $339.00
FORTHCOMING
Tangible Waves AE Modular 1 Row Rack Empty Case
Cat: 719708
 
Empty rack for AE modular, 16U
Notes: The 1-row rack for AE modular is 16 units wide; two of them are used by the MASTER module so you have 14U remaining for other modules.

Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.

Dimensions:41.3 x 11.2 x 4.5 cm (width x depth x height)
Read more
coming soon $28.34
FORTHCOMING
Tangible Waves AE Modular 10 x Patchwires (10cm)
Cat: 719704
 
Pack of 10 patch wires
Notes: A set of 10 Patchwires for AE modular; with a length of 10cm.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 10 x Patchwires (17cm)
Cat: 719721
 
Pack of 10 patch wires
Notes: A set of 10 Patchwires for AE modular; with a length of 17cm.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 10 x Patchwires (25cm)
Cat: 719705
 
Pack of 10 patch wires
Notes: A set of 10 Patchwires for AE modular; with a length of 25cm.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 10 x Patchwires (40cm)
Cat: 719706
 
Pack of 10 patch wires
Notes: A set of 10 Patchwires for AE modular; with a length of 40cm.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 10 x Patchwires (50cm)
Cat: 719707
 
Pack of 10 patch wires
Notes: A set of 10 Patchwires for AE modular; with a length of 50cm.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 12U Eurorack Adapter Frame
Cat: 719730
 
AE modular Eurorack adapter frame
Notes: The AE modular Eurorack adapter frame allows to integrate AE modular modules into Eurorack systems. It is basically an empty Eurorack-sized frame that can take up to 12 units of AE modules where two units are occupied by the mandatory MASTER module. Via the MASTER module the frame is powered from the Eurorack bus.

The product includes:

- The mounting frame with screws for mounting the AE modules
- The ribbon cable for Eurorack bus connection
- The bus cable
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 16U Eurorack Adapter Frame
Cat: 719731
 
AE modular Eurorack adapter frame
Notes: The AE modular Eurorack adapter frame allows to integrate AE modular modules into Eurorack systems. It is basically an empty Eurorack-sized frame that can take up to 16 units of AE modules where two units are occupied by the mandatory MASTER module. Via the MASTER module the frame is powered from the Eurorack bus.

The product includes:

- The mounting frame with screws for mounting the AE modules
- The ribbon cable for Eurorack bus connection
- The bus cable
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 1U Blank Module
Cat: 719722
 
Blank module for AE modular - 1U
Notes: If your rack isn't filled completely with modules, use this blank module to fill the spaces.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 2 Row Rack Empty Case
Cat: 719709
 
Empty rack for AE modular, 2 x 16U
Notes: The 2-row rack for AE modular is 16 units wide with 2 rows; the MASTER module consumes 2 units so you have 30U remaining for other modules.

Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.

Dimensions: 41.3 x 21.7 x 4.5 cm (width x depth x height)
Read more
coming soon $42.37
FORTHCOMING
Tangible Waves AE Modular 2U Blank Module
Cat: 719725
 
Blank module for AE modular - 2U
Notes: If your rack isn't filled completely with modules, use this blank module to fill the spaces.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 4U Blank Module
Cat: 719726
 
Blank module for AE modular - 4U
Notes: If your rack isn't filled completely with modules, use this blank module to fill the spaces.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 8U Eurorack Adapter Frame
Cat: 719727
 
AE modular Eurorack adapter frame
Notes: The AE modular Eurorack adapter frame allows to integrate AE modular modules into Eurorack systems. It is basically an empty Eurorack-sized frame that can take up to 8 units of AE modules where two units are occupied by the mandatory MASTER module. Via the MASTER module the frame is powered from the Eurorack bus.

The product includes:

- The mounting frame with screws for mounting the AE modules
- The ribbon cable for Eurorack bus connection
- The bus cable
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular Type 1 Bus Cable
Cat: 719711
 
Bus cable for AE modular
Notes: The Bus Cable connects the AE modular modules, it contains the power supply (GND, +5V) and CV, Gate, Controller, MIDI-clock/start/stop in a 10-pin ribbon cable. The folding pattern makes it possible to mount/unmount the module connected to the cable.

It has 16 sockets; one for connecting to the MASTER module and 15 for all other modules.

PLEASE NOTE: Type 1 is for a 1-row rack or the upper part of a 2-row rack (the row where the MASTER module is).
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular Type 2 Bus Cable
Cat: 719713
 
Bus cable for AE modular
Notes: The Bus Cable connects the AE modular modules, it contains the power supply (GND, +5V) and CV, Gate, Controller, MIDI-clock/start/stop in a 10-pin ribbon cable. The folding pattern makes it possible to mount/unmount the module connected to the cable.

It has 17 sockets; one for connecting to the MASTER module and 16 for all other modules.

PLEASE NOTE: Type 2 is for the lower part of a 2-row rack (the row below the MASTER module).
Read more
coming soon TBA
FORTHCOMING
Teenage Engineering ZM1 Oplab Expansion Module For OPZ
Cat: 725944
 
User-installable hardware expansion for the OP-Z synthesizer workstation
Notes: Imagine having the power and flexibility of the OP-Z sequencer available to any other music equipment. Now you can, with the new Oplab module - the magic link between OP-Z and the rest of the world. The Oplab module is the first hardware expansion module for OP-Z. Once mounted in the back of your OP-Z, you can use it to connect to any equipment using standard cv and gate, such as the pocket operator modular or any other modular system. It features three cv outs and one gate out, all programmable and playable from OP-Z. Have your wall of modules sequenced from the palm of your hands. Use the po sync out to unleash the power of your regular pocket operators and have them play in sync with the rest of your setup. Even connect standard midi devices, using midi over 3.5 mm jack or the included midi over din adapter cable. Oplab features both midi in and out ports as well as trig in and out for other synthesizers and sequencers.
Read more
coming soon TBA
FORTHCOMING
Tiptop Audio Tape Echo ZDSP Cartridge
Cat: 733659 Rel: 31 May 19
coming soon $79.45
Artikel 1 bis 34 von 34 auf Seite 1 von 1 anzeigen

Filter

Synth module accessories
DJ-Ausrüstung
Release Date
Featured
Close