100% Sicheres Einkaufen

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Sicheres Einkaufen

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

MIDI converters & accessories

View:
Options
Artikel 1 bis 6 von 6 auf Seite 1 von 1 anzeigen
Cat: 691664 Rel: 31 May 18
 
Converts analog trigger clock signals to MIDI clock signals & vice versa
Notes: The Audiowerkstatt trigger2midi2trigger v2 has all functions of the classic version 1, but comes in a powder-coated steel-enclosure and stores its settings.

If used as trigger-clock-to-MIDI-clock-converter or MIDI-clock-to-trigger-clock-converter, there is always a MIDI-clock-signal (incl. start/stop) sent at the "midi out"-jack. At the tip of the "clock"-phone-jack, an analog trigger-clock-signal (v-trigger: 0v/5v, s-trigger "open"/"closed") is sent. The tip of the "start/stop"-phone-jack is 5v while the masterclock is running and 0v while the masterclock is paused for v-trigger and "closed" while the masterclock is running and "open" while the masterclock is paused, if s-trigger is used.

A clock-source can be connected to the "midi in"-jack or to the ring of the "clock"- and "start/stop"-phone-jack.

Normal insert-cables can be used to connect the analog inputs/outputs. If only the analog outputs are used, normal phone-jack-cables (mono or stereo) can be used.

The following parameters can be adjusted:

1. Clock-source (MIDI-clock or analog trigger-clock).
2. Trigger-type of the analog input (s-trigger or v-trigger).
3. Trigger-type of the analog output (s-trigger or v-trigger).
4. Clock-divider of the incoming analog trigger-clock (1/4, 1/8. 1/16 or 1/32).
5. Clock-divider of the outgoing analog trigger-clock (1/4, 1/8. 1/16 or 1/32).
6. Pulse-length of the outgoing analog trigger-clock (adjustable in 6 steps, the pulse-length is calculated dependent on clock-divider and clock-frequency).

In addition to the clock-signal, start-/stop-signals from the masterclock are detected and processed, but it is also possible to send start-/stop-signals manual.

The settings for the analog output (trigger.type out, clock.divider out and pulse.length) can be changed without losing synchronisation, while the masterclock is running.

The Audiowerkstatt trigger2midi2trigger v2 can also be used as a tool for analog-trigger-signals, if it isn't used as a converter.

The following uses are possible:

a) "S-trigger" to "V-trigger" converter
b) "V-trigger" to "S-trigger" converter
c) Analog clock-divider
d) Analog clock-multiplier
e) Gate to trigger converter
f) Trigger to gate converter with adjustable gate-length

Power: 9-12V AC or DC (polarity doesn't matter)
Dimensions: 112 mm x 72 mm x 48 mm
Weight: 290g
Read more
 2 in stock $182.22
Cat: 531918 Rel: 02 Sep 14
 
Jitter-free MIDI masterclock for hardware gear or synchronisation with DAWs
Notes: Sync all your sequencers with ease and control the BPM - that's what we designed the midiclock for!

It's an ultra-stable hardware MIDI-Masterclock generator & has a great knob to give you full control over the tempo of your performances.

The midiclock generates incredibly accurate MIDI Clock messages.

It has two DIN MIDI outputs to connect to your gear. The clock signal can be distributed to more than two slaves by using MIDI Thru and you can start and stop everything with a single button.

Simply attach all devices that have MIDI Clock slave capabilities: Sequencers, synthesizers, drummachines and software like 'Live' from Ableton.

How to actually set the current BPM depends on the operating mode:

While using 'Live' mode, the BPM change immediately by turning the knob. You can use this mode if you want to make smooth tempo changes in your performance and are aware, that every turn of the knob changes the BPM.

In the 'Normal' mode, the changed value must be confirmed with a single click of the knob. This mode is perfect if you want to set your tempo once and simply need a stable clock signal. Accidental turning of the knob doesn't affect your BPM.
Read more
 1 in stock $169.50
Cat: 656385 Rel: 07 Jul 17
 
High specification CV to MIDI converter - designed to work with all types of CV inputs
Notes: - CV & Gate inputs on 3.5mm mono jack sockets
- A to D conversion for main CV input is 16 bit high quality ADC
- V/octave, Hz/V or 1.2V/oct modes selectable
- Gate type can be selected as Gate or S-trig
- Aux1 & 2 inputs on 3.5mm mono jack (continuously variable or switch selectable)
- Auxes can select controller number
- Auto tune feature makes setup easy
- MIDI Out on 5 pin DIN socket
- Non-volatile memory EEPROM (no back-up battery required)
- 32 bit ARM processor

PLEASE NOTE: Comes with UK 3-pin power supply
Read more
 1 in stock $151.49
Click for better price!
quote 656385
Cat: 443845 Rel: 11 Jan 12
 
Bi-directional MIDI-DCB interface, including 14 pin DCB lead
Notes: The Kenton Pro-DCB brings instant MIDI to those much-loved instruments, the Juno-60 and Jupiter-8 (must have an existing DCB 14 pin). Just plug in and go.

As well as offering control of notes (and program change on Jupiter-8), the interface also has output sockets for filter control and arpeggio clocking. In addition, it boasts a built-in programmable LFO and works both ways (ie. it's bi-directional), so your Juno can be used as a master keyboard if required. We think that you'll find this the most comprehensive MIDI-DCB converter available today, and it's fast too.

2 x 3.5mm mono jack to 1/4" mono jack leads for Clock and VCF are included as well as the selected DCB lead.

*Supplied with UK 3-pin power adapter
Read more
 2 in stock $176.91
Cat: 584896 Rel: 16 Sep 15
 
1 MIDI in to 25 MIDI thru sockets, works for ALL MIDI messages including Clock, SysEx, MTC etc
Notes: Receives MIDI data from a single MIDI OUT (e.g. sequencer or master keyboard) and produces identical copies at the 25 MIDI THRU sockets. These can then be connected to the MIDI INs of sound modules or other devices which require MIDI signals sent to them.

High quality Kenton MIDI Thru box with opto-isolated MIDI In and separate drive for each MIDI Out. Powered from a mains adaptor (wall wart) so you can fit and forget.

PLEASE NOTE: Comes with UK 3-pin power supply
Read more
 2 in stock $170.56
Click for better price!
quote 584896
Cat: 725749 Rel: 16 Sep 15
 
B-STOCK: Box damaged, product unused & in perfect condition
Notes: ***B-STOCK: Box damaged, product unused & in perfect condition***


Receives MIDI data from a single MIDI OUT (e.g. sequencer or master keyboard) and produces identical copies at the 25 MIDI THRU sockets. These can then be connected to the MIDI INs of sound modules or other devices which require MIDI signals sent to them.

High quality Kenton MIDI Thru box with opto-isolated MIDI In and separate drive for each MIDI Out. Powered from a mains adaptor (wall wart) so you can fit and forget.

PLEASE NOTE: Comes with UK 3-pin power supply
Read more
 1 in stock $157.35
Artikel 1 bis 6 von 6 auf Seite 1 von 1 anzeigen

Filter

MIDI converters & accessories
DJ-Ausrüstung
Release Date
Featured
Close