100% Sicheres Einkaufen

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Sicheres Einkaufen

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

MIDI converters & accessories

View:
Options
Artikel 1 bis 21 von 21 auf Seite 1 von 1 anzeigen
Cat: 691664 Rel: 31 May 18
 
Converts analog trigger clock signals to MIDI clock signals & vice versa
Notes: The Audiowerkstatt trigger2midi2trigger v2 has all functions of the classic version 1, but comes in a powder-coated steel-enclosure and stores its settings.

If used as trigger-clock-to-MIDI-clock-converter or MIDI-clock-to-trigger-clock-converter, there is always a MIDI-clock-signal (incl. start/stop) sent at the "midi out"-jack. At the tip of the "clock"-phone-jack, an analog trigger-clock-signal (v-trigger: 0v/5v, s-trigger "open"/"closed") is sent. The tip of the "start/stop"-phone-jack is 5v while the masterclock is running and 0v while the masterclock is paused for v-trigger and "closed" while the masterclock is running and "open" while the masterclock is paused, if s-trigger is used.

A clock-source can be connected to the "midi in"-jack or to the ring of the "clock"- and "start/stop"-phone-jack.

Normal insert-cables can be used to connect the analog inputs/outputs. If only the analog outputs are used, normal phone-jack-cables (mono or stereo) can be used.

The following parameters can be adjusted:

1. Clock-source (MIDI-clock or analog trigger-clock).
2. Trigger-type of the analog input (s-trigger or v-trigger).
3. Trigger-type of the analog output (s-trigger or v-trigger).
4. Clock-divider of the incoming analog trigger-clock (1/4, 1/8. 1/16 or 1/32).
5. Clock-divider of the outgoing analog trigger-clock (1/4, 1/8. 1/16 or 1/32).
6. Pulse-length of the outgoing analog trigger-clock (adjustable in 6 steps, the pulse-length is calculated dependent on clock-divider and clock-frequency).

In addition to the clock-signal, start-/stop-signals from the masterclock are detected and processed, but it is also possible to send start-/stop-signals manual.

The settings for the analog output (trigger.type out, clock.divider out and pulse.length) can be changed without losing synchronisation, while the masterclock is running.

The Audiowerkstatt trigger2midi2trigger v2 can also be used as a tool for analog-trigger-signals, if it isn't used as a converter.

The following uses are possible:

a) "S-trigger" to "V-trigger" converter
b) "V-trigger" to "S-trigger" converter
c) Analog clock-divider
d) Analog clock-multiplier
e) Gate to trigger converter
f) Trigger to gate converter with adjustable gate-length

Power: 9-12V AC or DC (polarity doesn't matter)
Dimensions: 112 mm x 72 mm x 48 mm
Weight: 290g
Read more
 2 in stock $181.49
Cat: 686702 Rel: 27 Apr 18
 
Compact MIDI box featuring 8 MIDI through splitters
Notes: Erica Synths MIDI thru box is professional quality, no latency, one MIDI In to 8 MIDI Through splitter in rigid aluminium case. It allows to connect up to 8 instruments to your sequencer or master keyboard and control them simultaneously without undesired delays and interference.
Read more
 2 in stock $123.44
Click for better price!
quote 686702
Cat: 531918 Rel: 02 Sep 14
 
Jitter-free MIDI masterclock for hardware gear or synchronisation with DAWs
Notes: Sync all your sequencers with ease and control the BPM - that's what we designed the midiclock for!

It's an ultra-stable hardware MIDI-Masterclock generator & has a great knob to give you full control over the tempo of your performances.

The midiclock generates incredibly accurate MIDI Clock messages.

It has two DIN MIDI outputs to connect to your gear. The clock signal can be distributed to more than two slaves by using MIDI Thru and you can start and stop everything with a single button.

Simply attach all devices that have MIDI Clock slave capabilities: Sequencers, synthesizers, drummachines and software like 'Live' from Ableton.

How to actually set the current BPM depends on the operating mode:

While using 'Live' mode, the BPM change immediately by turning the knob. You can use this mode if you want to make smooth tempo changes in your performance and are aware, that every turn of the knob changes the BPM.

In the 'Normal' mode, the changed value must be confirmed with a single click of the knob. This mode is perfect if you want to set your tempo once and simply need a stable clock signal. Accidental turning of the knob doesn't affect your BPM.
Read more
 1 in stock $168.82
Cat: 600727 Rel: 12 Feb 16
 
Professional conversion box for syncing multiple hardware devices
Notes: Professional Sync:
The multiclock solves your sync issues in the studio and on stage once and for all.
Synchronisation of the multiclock to a DAW relies on a sample accurate audio clock stream, which in consequence guarantees absolutely tight clock signals with i1 sample of jitter.
Moreover, you can use it as a standalone generator or hook it up to follow other MIDI, DIN or analog master clocks.

Shift & Shuffle:
To compensate for any time lag of connected gear, you can shift each output channel individually and in realtime back and forth relative to the master clock.
The shift range is completely configurable and has a maximum of i400ms, the resolution is 20us.
If you have set your machines up to be on the spot, start playing with shuffle. Again, individually for each channel and in realtime.

Midi, Din, Modular & LFO:
Each channel can be set to either emit MIDI Clock, DIN sync (sync24) or analog clock.
Analog clock signals are configurable in polarity, start/reset behaviour and feature a flexible clock divider. An analog LFO is available with various waveforms and a range of 0-5V.
If you got them configured, channel settings can always be named and saved as a preset for later recall. Just in case you have a lot of gear.

USB Add-On
If you want, you can have your multiclock with an extra class-compliant USB Midi Add-On.
This enables you to send any MIDI commands from a DAW to your connected slaves while syncing to audio clock.
There is one virtual MIDI output for each channel and all commands are priority-merged with the accurate clock.
Read more
 1 in stock $449.49
Cat: 477605 Rel: 20 Dec 12
 
MIDI interface
Notes: The KMI MIDI Expander enables you to use KMI gear such as SoftStep, 12 Step and QuNeo to control your MIDI hardware devices with 5-pin MIDI DIN connectors.

Plug in your MIDI devices to the KMI MIDI Expander and you're ready to send and receive MIDI data with or without a computer.

Read more
 8 in stock $52.75
Click for better price!
quote 477605
Cat: 578608 Rel: 07 Jul 15
 
Bi-directional MIDI to DIN Sync converter with 1 MIDI In & 1 MIDI Out / 1 Sync In & 1 Sync Out
Notes: Receives MIDI clock and stop/start data and converts them to DIN-Sync (Sync-24). Also converts DIN-Sync back to MIDI.

High quality Kenton MIDI MIDI to DIN-Sync converter box with opto-isolated MIDI In plus MIDI Out, Sync In & Sync Out sockets. Powered from a multi-region mains adaptor (wall wart) so you can fit and forget. Can also be powered from a USB socket (although not a USB product)
Read more
 1 in stock $93.25
Click for better price!
quote 578608
Cat: 443853 Rel: 11 Jan 12
 
Merge MIDI box with 4 inputs/2 outputs
Notes: The Kenton Merge 4 can merge the data from up to 4 separate MIDI sources (e.g. Master keyboards or controllers) into a single MIDI data stream which appears at both of the MIDI out sockets. It features 4 opto-isolated MIDI inputs and 2 MIDI outputs.

The Kenton Merge 4 is powered from a mains adaptor (wall wart) so you can fit and forget.

PLEASE NOTE: Comes with UK 3-pin power supply
Read more
 3 in stock $91.79
Click for better price!
quote 443853
Cat: 433906 Rel: 10 Sep 11
 
USB host to MIDI converter for 'Class Compliant' USB MIDI devices
Notes: Your USB device is plugged into the USB MIDI Host MkII instead of into a computer. It provides MIDI In & Out sockets for USB MIDI keyboards and controllers which have only a USB B type socket. For example, used with a USB-Solo, it allows the USB-Solo to be used in a standard MIDI setup, just like a Pro-Solo. It has a USB Host port (USB A type socket), a MIDI In and a MIDI Out (both 5 pin DIN).

MIDI data received at the MIDI In socket will be sent to the USB device. MIDI data received from the USB device will be sent to the MIDI Out socket.

The attached USB MIDI device MUST be 'Class Compliant'.

The MIDI USB HOST is powered by a regulated 5V mains adaptor (supplied), and can supply up to 1 Amp of buss power to the attached USB device. This product is supplied with a multi-region power supply suitable for use in most countries.
Read more
 7 in stock $93.90
Click for better price!
quote 433906
Cat: 443845 Rel: 11 Jan 12
 
Bi-directional MIDI-DCB interface, including 14 pin DCB lead
Notes: The Kenton Pro-DCB brings instant MIDI to those much-loved instruments, the Juno-60 and Jupiter-8 (must have an existing DCB 14 pin). Just plug in and go.

As well as offering control of notes (and program change on Jupiter-8), the interface also has output sockets for filter control and arpeggio clocking. In addition, it boasts a built-in programmable LFO and works both ways (ie. it's bi-directional), so your Juno can be used as a master keyboard if required. We think that you'll find this the most comprehensive MIDI-DCB converter available today, and it's fast too.

2 x 3.5mm mono jack to 1/4" mono jack leads for Clock and VCF are included as well as the selected DCB lead.

*Supplied with UK 3-pin power adapter
Read more
 2 in stock $176.20
Cat: 584896 Rel: 16 Sep 15
 
1 MIDI in to 25 MIDI thru sockets, works for ALL MIDI messages including Clock, SysEx, MTC etc
Notes: Receives MIDI data from a single MIDI OUT (e.g. sequencer or master keyboard) and produces identical copies at the 25 MIDI THRU sockets. These can then be connected to the MIDI INs of sound modules or other devices which require MIDI signals sent to them.

High quality Kenton MIDI Thru box with opto-isolated MIDI In and separate drive for each MIDI Out. Powered from a mains adaptor (wall wart) so you can fit and forget.

PLEASE NOTE: Comes with UK 3-pin power supply
Read more
 2 in stock $169.87
Click for better price!
quote 584896
Cat: 725749 Rel: 16 Sep 15
 
B-STOCK: Box damaged, product unused & in perfect condition
Notes: ***B-STOCK: Box damaged, product unused & in perfect condition***


Receives MIDI data from a single MIDI OUT (e.g. sequencer or master keyboard) and produces identical copies at the 25 MIDI THRU sockets. These can then be connected to the MIDI INs of sound modules or other devices which require MIDI signals sent to them.

High quality Kenton MIDI Thru box with opto-isolated MIDI In and separate drive for each MIDI Out. Powered from a mains adaptor (wall wart) so you can fit and forget.

PLEASE NOTE: Comes with UK 3-pin power supply
Read more
 1 in stock $156.72
Cat: 358433 Rel: 18 Jun 09
 
Thru box with 1 MIDI input to 5 MIDI thru. mains adaptor included
Notes: The Kenton Thru-5 is a high quality MIDI Thru box with opto-isolated MIDI In and separate drive for each MIDI Out. It is powered from a mains adaptor (wall wart) so you can fit and forget.

PLEASE NOTE: Comes with UK 3-pin power supply
Read more
 3 in stock $62.24
Click for better price!
quote 358433
Cat: 524241 Rel: 13 Mar 14
 
Compact MIDI event processor with a wide variety of functions
Notes: The MIDI Solutions Event Processor Plus offers all of the functionality of the MIDI Solutions Event Processor, with 32 settings instead of the Event Processor's 10, and 8 variable storage locations instead of the Event Processor's 2. Each of the Event Processor Plus's 32 settings can be programmed with a unique MIDI processing function. By combining these settings the Event Processor Plus becomes an extremely powerful tool capable of processing MIDI events in almost any way imaginable. You can map MIDI events or ranges of MIDI events to other MIDI events, filter MIDI events or ranges of MIDI events, trigger MIDI events, toggle between MIDI events, sequence through MIDI events, scale or crossfade MIDI messages, transpose notes, scale velocities, map to and from System Exclusive, NRPN, Bank Select messages, store incoming values in variables for later use... the Event Processor is like a swiss army knife of MIDI processing products, an indispensable tool in any MIDI musician's arsenal.

The Event Processor Plus works by comparing each incoming MIDI event with each of its 32 settings. When an incoming MIDI event matches a setting, the event is processed according to that setting. By combining different settings for different incoming events, the Event Processor Plus becomes an extremely powerful tool capable of achieving virtually any combination of MIDI-processing functions.

Following is a list of the Event Processor Plus's functions, but better yet download the Event Processor Plus Programming Tools software and read the Guide to the Event Processor and Event Processor Plus by Bruce Wahler of Ashby Solutions. The Programming Tools software is free for download, quick to install, and contains lots of example files that demonstrate the many applications of the Event Processor Plus. And the Guide to the Event Processor and Event Processor Plus is a comprehensive guide that makes it easy to understand everything these amazing products are capable of!

Filter MIDI Events

Map MIDI Events

Trigger MIDI Events

Cycle Through a Sequence of MIDI Events

Turn Settings On and Off

Store Incoming Values in Variables


The Event Processor Plus is programmed by sending it MIDI System Exclusive messages (see FAQs - Programming). This is easily done with the Event Processor Plus Programming Tools software. Once programmed, the Event Processor Plus's settings are retained even after power is removed. The Event Processor Plus can be reprogrammed with new settings as often as needed.

The Event Processor Plus is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.

weight: 3.8 oz.
dimensions: 4-3/16" x 2-3/16" x 1-3/32"
Read more
 2 in stock $145.60
MIDI Solutions Footswitch Controller (footswitch controller)
Cat: 524238 Rel: 13 Mar 14
 
Compact footswitch controller for converting 1/4" jack signal into MIDI events
Notes: The MIDI Solutions Footswitch Controller provides a 1/4" phone jack input for connection to a footswitch or contact closure which can be used to trigger MIDI events (for eight footswitch inputs in a single rack space unit, see the MIDI Solutions F8). Triggered MIDI events are merged with incoming MIDI messages and sent to the MIDI output of the Footswitch Controller.

Triggered event types are programmable and include: Note, Control Change, Pitch Bend, Program Change, Start/Stop, System Exclusive

Other functions include: Program Change INC/DEC, Rechannelize, Transpose, Tap Tempo, Note-on Filter

MIDI Echo and Footswitch Toggle parameters are selectable on/off.

The Polarity of the footswitch can be determined automatically on power-up, or programmed to normally-open or normally-closed.

The Footswitch Controller is programmed by sending it MIDI System Exclusive messages (see FAQs - Programming). This can be done easily with the Processors Programming Tools software. Once programmed, its settings are retained even after power is removed. The Footswitch Controller can be reprogrammed with new settings as often as needed.

The Footswitch Controller is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.
Read more
 2 in stock $127.66
Click for better price!
quote 524238
Cat: 524233 Rel: 13 Mar 14
 
Compact 2 in 2 out MIDI merger
Notes: The MIDI Solutions Merger is a 2-in 2-out MIDI Merger. All MIDI messages appearing at the two inputs are merged to the outputs (including System Exclusive, MIDI Clock, and MIDI Time Code messages). A fast merging algorithm ensures that all MIDI data is processed accurately with the minimal possible delay.

The Merger is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.
Read more
 More than 10 in stock $68.59
Click for better price!
quote 524233
Cat: 524234 Rel: 13 Mar 14
 
Compact 4 in 1 out MIDI merger
Notes: The MIDI Solutions Quadra Merge packs four MIDI inputs into a 4.5" x 2.5" x 1.25" package. All MIDI messages appearing at the four inputs of the Quadra Merge are merged to the output (including System Exclusive, MIDI Clock, and MIDI Time Code messages). A fast merging algorithm ensures that all MIDI data is processed accurately with the minimal possible delay.

The Quadra Merge is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.
Read more
 1 in stock $111.85
Click for better price!
quote 524234
Cat: 524237 Rel: 13 Mar 14
 
Compact 1 in 4 out MIDI thru box
Notes: The MIDI Solutions Quadra Thru is a 1 in 4 out MIDI Thru Box. All MIDI messages appearing at the input are sent to all four Thru outputs. Active circuitry cleans up any skewing of MIDI data bits that has occurred at the input, ensuring reliable operation in setups that require daisy chaining or long cable runs.

The Quadra Thru is MIDI powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.
Read more
 9 in stock $52.76
Click for better price!
quote 524237
MIDI Solutions Thru Box V2 (MIDI interface)
Cat: 524235 Rel: 13 Mar 14
 
Compact 1 in 2 out MIDI thru box
Notes: The MIDI Solutions Thru is a 1 in 2 out MIDI Thru Box. All MIDI messages appearing at the input are sent to both Thru outputs. Active circuitry cleans up any skewing of MIDI data bits that has occurred at the input, ensuring reliable operation in setups that require daisy chaining or long cable runs.

The MIDI Solutions Thru is MIDI powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.
Read more
 5 in stock $43.25
Click for better price!
quote 524235
Cat: 437471 Rel: 10 Oct 11
 
5-in/5-out MIDI interface, compatible with Mac and Windows
Notes: Built from the same technology found in MOTU's flagship MIDI Timepiece, the Micro Lite is a professional MIDI interface that provides portable, plug-and-play connectivity to any USB-equipped Mac or Windows computer.

The Micro Lite provides 5 MIDI inputs, 5 MIDI outputs, 80 MIDI channels and compatibility with all Mac and Windows software. Large front-panel LEDs illuminate to indicate MIDI activity.

The Micro Lite takes full advantage of USB, giving you high-speed MIDI throughput, sub-millisecond timing accuracy, support for hot-swapping and plug-and-play expansion. Need to connect another sound module or synth? No problem. Just add another MOTU USB MIDI interface via any available USB port. And the Micro Lite is powered by the USB port i no wall wart or AC plug.

With its attractive yet rugged metal casing, the Micro Lite slides easily into a shoulder bag or briefcase for ultra-compact portability and convenient desktop operation. Removable rack attachments, as well as a custom center-joint fastener, are included and allow you to easily mount 2 Micro Lites side by side in a standard 19" equipment rack.

No other MIDI interface offers this much value, performance and portability at such an affordable price.

Read more
 2 in stock $130.91
Cat: 452150 Rel: 23 Apr 12
 
8-input/8-output MIDI interface compatible with Mac and Windows
Notes: The MIDI Express 128 is an 8-input/8-output MIDI interface compatible with Mac and Windows.

Built from the same technology found in MOTU's flagship MIDI Timepiece, the MIDI Express 128 is a professional MIDI interface that provides plug-and-play connectivity to any USB-equipped Mac or Windows computer. The Express 128 provides 8 x MIDI input, 9 x MIDI output, 128 x MIDI channels and compatibility with all Macintosh and Windows software.

The MIDI Express 128 takes full advantage of USB, giving you high-speed MIDI throughput, sub-millisecond timing accuracy, support for hot-swapping and plug-and-play expansion. Need to connect another sound module or synth? No problem. Just add another MOTU USB MIDI interface via any available USB port. And the Express 128 is powered by USB, no wall wart or AC plug.

No other MIDI interface offers this much value and performance at such an affordable price.

Read more
 3 in stock $207.86
Cat: 440724 Rel: 10 Nov 11
 
8-input/8-output MIDI interface, patchbay and merger with time code sync
Notes: Built with MOTU's award-winning MIDI interface technology, the MIDI Express XT is a professional MIDI interface and SMPTE synchronizer that provides plug-and-play connectivity to any USB-equipped Mac or Windows computer.

The Express XT provides 8 MIDI inputs, 9 MIDI outputs, 128 MIDI channels and compatibility with all Mac and Windows software. 16 convenient, one-touch presets (8 x factory and 8 x user programmable) give you instant front-panel access to multiple operational configurations.

The included ClockWorks console software for Mac OS X and Windows provides comprehensive MIDI routing, merging and muting.

As a professional-grade SMPTE time code synchronizer, the Express XT converts and stripes SMPTE in all frame formats (23.976, 24, 25, 29.97 drop and non-drop, and 30). SMPTE jam sync with adjustable freewheeling provides glitch-free sync.

The Express XT also supports MIDI Machine Control (MMC), with the ability to serve as either an MMC master or slave. The Express XT can distribute MMC transport commands to all other connected MMC devices.

Connect a foot switch to the convenient front-panel pedal input and then program it to generate MIDI data when pressed. Send the data to any connected devices. For example, you could send MIDI patch changes to synths and sound modules during live performance.

The MIDI Express XT takes full advantage of USB, giving you high-speed MIDI throughput, sub-millisecond timing accuracy, support for hot-swapping and plug-and-play expansion. Need to connect another sound module or synth? No problem. Just add another MOTU USB MIDI interface via any available USB port. And the Express XT's internal international power supply delivers reliable performance and professional operation.

No other MIDI interface offers this much value and performance at such an affordable price.
Read more
 1 in stock $348.19
Artikel 1 bis 21 von 21 auf Seite 1 von 1 anzeigen

Filter

MIDI converters & accessories
DJ-Ausrüstung
Release Date
Close