Juno Daily

Music and tech news, interviews, features, reviews and more.

Visit Juno Daily

100% Sicheres Einkaufen

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Sicheres Einkaufen

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.  Visit Juno DJ

MIDI controllers

Startseite  Equipment  

MIDI controllers

Options
Artikel 1 bis 3 von 3 auf Seite 1 von 1 anzeigen
Subscribe to our weekly Studio Equipment emails
Doepfer A-198 Trautonium Manual Ribbon Controller (manual only)
Cat: 755442 Rel: 13 Nov 19
 
Linear position sensor, for use with the A-198 module or R2M control box
Notes: Touching the sensor with a finger generates a control voltage CV1 that is proportional to the position of the finger. The scale (i.e. the relation between position difference and voltage difference) is adjustable with a potentiometer at the front panel. A hold switch is used to determine if the CV voltage is held after removing the finger (hold = on) or if the CV voltage jumps to 0V (hold = off). In the last case (hold = off) a gate signal is derived from the CV voltage whenever a finger touches the sensor (e.g. for triggering an envelope generator).

A sensitive pressure sensor located below the position sensor generates a second control voltage CV2 that increases with higher pressure of the finger. Even for CV2 the scale is adjustable. A second gate signal is triggered as soon as the pressure exceeds a certain value. The gate threshold is adjustable at the front panel.

The sensors are located in a separate metal frame (length about 600 mm, width about 30 mm, height about 18 mm, weight: about 900 g, colour: silver-grey). The connection between the module and the sensor frame is made by a 4 pin cable (same as used for USB connections).

Typical applications:

- Trautonium manual, the string is replaced by the position sensor that is much easier to use and cheaper than the string. In combination with the Subharmonic Oscillator A-113, the Trautonium Filter A-104 and some auxiliary modules a complete Trautonium replica may be realized. In combination with the Quantizer A-156 exact semitone intervals are possible.

- Ribbon Controller for any A-100 parameter (e.g. pitch, filter frequency, loudness, panorama, speed, modulation depth and so on)
Read more
 2 in stock $161.36
Click for better price!
or call +44 20 7424 1960
quote 755442
Nektar Pacer MIDI USB DAW Footswitch Controller
Cat: 683864 Rel: 09 May 18
 
MIDI foot controller with USB/MIDI connectivity, 24 preset locations, 10 footswitches & 1 encoder
Notes: PACER boosts your creativity by providing hands-free control of your DAW, MIDI guitar soft- or hardware as well as channel and FX switching on your trusted analog amp. All integrated into one rugged and stage-ready foot pedal with 10 programmable LED foot switches, 4 switching relays and connections for up to 4 external foot switches and 2 expression pedals. That's a lot of switching power right at your feet: With just one press of a button, you can send up to 16 MIDI and relay messages to reconfigure a setup instantly. Step up your pace with this powerful MIDI DAW Footswitch Controller!

THE POWER OF SWITCHES:
Pacer's programming options are extensive. In the most basic state, a switch can send a MIDI message or change a relay state. But being able to send MIDI messages in a sequence of steps, takes the usefulness of a preset to another level. Use one switch to step through program change messages during your song and the other switches are free for FX on/off control. Or switch your amp channel, start playback in your DAW and change program on your effects rack, all by just pressing ONE button within the same preset. Another 16 MIDI messages/relay settings can be programmed for triggering when each of the 24 presets are selected.

DAW CONTROL OPTIONS:
Don't stop the music: PACER is the only true hands-free solution for controlling a DAW and features a complete set of dedicated track and transport controls. For MCU (Mackie Control Universal) compatible DAWs, a Transport preset provides control over Cycle/Loop, Rewind, Forward, Stop, Play and Record. Each switch has its own large icon illuminated by an RGB LED to show the current status. The Track preset controls Solo, Mute, Record Arm and Click. Almost every DAW is compatible with MCU including Ableton Live, FL Studio or Sonar.

Nektar DAW integration provides the highest level of integration with additional options for track and patch selection, customized RGB LED colour feedback and in some cases additional functionality. Nektar DAW integration supports Bitwig, Cubase, GarageBand, Logic, Nuendo, Reason, Reaper and Studio One.

CONTROL CENTER:
PACER has 10 programmable foot switch controls, each equipped with an RGB LED. Add to that a crisp and large two row LED display, a dedicated switch for Preset recall and an encoder with push switch for programming, navigation and control. So, PACER definitely won't leave you in the dark, figuratively speaking: Depending on the active mode, the top or middle row icons are illuminated. The RGB LEDs in the bottom row display switch status.

DISPLAY AND LEDs:

A red LED display with two rows shows the active preset name/number, mode and selected parameter and value. The data encoder with push switching right next to it makes parameter selection and programming swift and easy. Each foot switch has its own RGB activity LED and function LEDs, which are also part of a preset. So, if you'd like a switch to use a different colour or LED, you can easily customize that!

SWITCHES A-D:

These switches are fully programmable, but factory assigned with these presets:

A: Track preset (for DAW control)
B: Transport preset (for DAW control)
C: Load previous preset
D: Load next preset

You can reconfigure the switches to send any other function or MIDI message.

SWITCHES 1-6:
You can program the switches to send MIDI messages, control one of PACER's 4 relays or to load presets. When DAW Transport or Track functions are assigned, the top and middle row icons are illuminated by default. Worth mentioning is, that each switch can change up to 6 actions simultaneously or in a sequence of presses. That's a lot of switching power right there!

PRESET SWITCH:
PACER has 24 presets. Any switch can be programmed to select a preset, but pressing and holding "Preset" and then selecting a bank & number is available at any time.
Read more
 2 in stock $184.17
Click for better price!
or call +44 20 7424 1960
quote 683864
Presonus Faderport MK2 USB Controller (B-STOCK)
Cat: 811615 Rel: 09 Oct 18
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Bring hands-on control to your software with Presonus' simple little USB controller. Physical transport controls and a nice long fader to help streamline your creative process in your DAW.

Supplier's notes:
The latest generation of PreSonus classic USB control surface, the FaderPort enables you to record and mix with a smooth, touch-sensitive, motorized, 100 mm fader; transport controls; and many of the new workflows introduced in the FaderPort 8 and 16. Manage markers, punch in and out with a footswitch (not included), arm tracks, and employ the innovative Session Navigator to control your favourite DAW application quickly and easily. The FaderPort connects via USB 2.0 and offers native control of PreSonus Studio One DAW (Studio One Artist is included), including Control Link support and parameter follow, allowing quick hardware access to any control.
Read more
 1 in stock $168.98
Artikel 1 bis 3 von 3 auf Seite 1 von 1 anzeigen

Filter

MIDI controllers
DJ-Ausrüstung
Release Date
Featured
Close