100% Sicheres Einkaufen

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Sicheres Einkaufen

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Effects pedals

Startseite  Equipment  

Effects pedals

Options
Artikel 1 bis 50 von 382 auf Seite 1 von 8 anzeigen
1  2  3  4  5  6  7  8  »
Subscribe to our weekly Studio Equipment emails
Barn3 OX9 Dual Auxiliary Footswitch For Eventide H9 Pedal
Cat: 747784 Rel: 17 Sep 19
 
Auxiliary 2-switch for the Eventide H9
Notes: Your Eventide H9 is one of the most advanced guitar pedals, but it only has two buttons. Unleash its full potential with a new kind of auxiliary switch. Meet the OX9 - a handcrafted H9 auxiliary switch with a form-fitting design that gives you more control and takes up less space on your board.

Stop fiddling with your iPad on stage and use your feet (like we used to do it the 20th century). The OX9's two additional buttons let you unleash the full potential of your H9 (with no hands)! The OX9 saves you a ton of pedalboard real-estate versus other auxiliary switches.

The input jack on the OX9 allows you to add another button or an expression pedal. The OX9's custom designed and moulded plug ensures you can still access every jack on the back of your H9.

The OX9 has a laser cut bottom plate, so it securely attaches to your H9 without hiding any of its sexy contours! Every OX9 is assembled, tested, and packaged in Klecknersville, PA.
Read more
MRP:$119.91 SAVE 17%
! low stock $99.93
Click for better price!
or call +44 20 7424 1960
quote 747784
Behringer ADI21 V Tone Acoustic Driver DI Acoustic Amp Modeler/Direct Recording Preamp/DI Box
Cat: 493805 Rel: 26 Jun 13
 
Analog modelling acoustic guitar preamp with DI recording output
Notes: For an unplugged sound that's rich, loud and electrifying, step on the V Tone Acoustic Driver DI ADI21. This amazing little box is essential for piezo equipped guitars and will make your acoustic guitar sound come to life!

By their very nature, piezo pickups tend to be very bright, with somewhat reduced bass response and warmth. The ADI21 combines the features of an active DI (direct injection) box with our proprietary microphone/tube emulation. If you don't want to use the emulation feature, the ADI21 also functions as a superb active DI box. The blend control allows you to mix the amount of modeled tone with your instrument's normal output. The resulting sound is more natural with smooth saturation, just as if your guitar were being miked.

Armed with an onboard 3 band EQ, with sweepable mids to keep feedback under control, the ADI21 effectively eliminates the harsh harmonics of piezo pickups. The output is laid out on 1/4" TS or balanced gold plated XLR connectors, which can be used to send a low impedance signal to the mixing console or straight to tape. You also get a ground lift switch to eliminate annoying ground loop hum problems. You can power this little lifesaver with a 9V battery or Behringer's PSU-SB DC power supply (not included).
Read more
 More than 10 in stock $22.45
Behringer CS400 Compressor/Sustainer Ultimate Dynamics Effects Pedal
Cat: 493807 Rel: 27 Jul 13
 
Guitar compression/sustain effects pedal with dedicated level, tone, attack, and sustain dials
Notes: If tone is the name of your game, the Compressor/Sustainer CS400 will add amazing impact to your tone and provide endless sustain.

Dynamics play an important role in music. They help to convey emotion, whether it's a sultry blues solo or the unrelenting gallop of unfettered metal. But uncontrolled dynamics can take all your best intentions and turn them into so much, well - mush. That's where compression comes in, softening loud sounds and boosting low signal levels to keep everything more uniform. So, a compressor's main job is to make every note the same volume.

Ever notice how some strings on your guitar or bass sound louder than others? This is partly due to physics. Strings with lower mass just don't put out as much volume as the heavier ones. When used properly, a compressor makes all of the strings the same volume. Compressors are also great for slap style bass players, making thumb slaps, string pulls and muted notes all the same volume, for an extremely percussive effect.

You can dial in the right amount of compression using the dedicated Attack and Sustain dials. The Level control allows you to set the output to subtle, or engage a monster volume boost. Tone lets you add exactly the right level of highs. From clean, snappy country leads to rock solos that scream for eons, the CS400 is built to make your sound the center of attention.

Its LED tells you when it's on, and the top quality on/off switch maintains outstanding signal integrity in bypass mode.

You can power this scene stealer with either a 9V battery or Behringer's PSU-SB DC power supply (not included).
Read more
 More than 10 in stock $27.79
Behringer HD300 Heavy Distortion Heavy Metal Distortion Effects Pedal
Cat: 493731 Rel: 26 Jun 13
 
Guitar distortion effects pedal with dedicated gain, distortion, tone, bottom and level controls
Notes: When you're ready to go beyond the boundaries of brutality, you have to throw some serious weight to get the job done. That's when you break out the Heavy Distortion HD300.

In addition to providing loads of devastating distortion, this little sonic warhead allows you crank up the bottom end and the gain, to lay waste to everything in your path.

With its dedicated gain boost, distortion, tone, bottom and level control, you can dial in a trademark sound all your own. The blue status LED tells you when this pedal is activated, and the rock solid on/off switch maintains outstanding signal integrity in bypass mode.

You can power this behemoth with either a 9 V battery or a PSU-SB DC power supply (not included)
Read more
 More than 10 in stock $21.33
Behringer UT300 Ultra Tremolo Classic Tremolo Effects Pedal
Cat: 493794 Rel: 26 Jul 13
 
Guitar temolo effects pedal with dedicated rate, wave and depth controls
Notes: When you've got to have the classic tremolo made famous by vintage '50s amps, get the Behringer Ultra Tremolo UT300.

The classic surf music of the '50s and '60s might not have even happened if tremolo hadn't come along. Vintage amps produced this intriguing effect by pulsing the volume of the instrument signal at a user-adjustable rate. The UT300 pays homage to this legendary sound, bringing it up to date for modern surf freaks.

With its dedicated Rate, Wave and Depth dials, you can shape a pulsating tremolo that nails every sound from rowdy rockabilly and surging surf, to modern space rock.

A red LED tells you when the effect is activated, and you can power this groovy stomp box with either a Behringer PSU-SB DC power supply (not included) or a 9 V battery.

A top quality on/off switch maintains excellent signal integrity in bypass mode.
Read more
 1 in stock $27.51
FORTHCOMING
Cornell Legacy Fuzz Effects Pedal
Cornell Legacy Fuzz Effects Pedal (fuzz effects pedal)
Cat: 804722 Rel: 31 Mar 21
 
Fuzz pedal
Notes: The Cornell Legacy Fuzz has that classic Sound without the historical problems that has plagued the famous pedal.Top musicians know that Cornell are the go to people for the unique custom design guitar amplification, it is also well known that Cornell was involved with the famous Abiter Fuzz Face.in fact it was Cornell that Arbiter went to when the re issue model was made in 1999 based on the Original 60's Design.So with that history and knowledge Cornell Has set out to make a new Fuzz pedal design.Starting with tackling the problems of the original design yet maintaining that classic tone.
Read more
MRP:$336.83 SAVE 24%
coming soon $255.97
Danelectro Billionaire Billion Dollar Boost Pedal
Cat: 676314 Rel: 09 Mar 18
 
Compact boost effect pedal for electric guitar
Notes: The 'Billion Dollar Boost' reissue of a rare 80's 'hidden gem'. Boosts all frequencies, plus provides pure pre-amp clean with lots of gain. Clean and crisp at 50% or less, but pushes the amp into crunchy bite at 50% or more, this pedal will become your secret weapon.
Read more
MRP:$107.78 SAVE 51%
 1 in stock $52.76
Click for better price!
or call +44 20 7424 1960
quote 676314
Danelectro Billionaire Filthy Rich Tremolo Pedal (B-STOCK)
Cat: 803411 Rel: 09 Mar 18
 
B-STOCK: Slight surface marks
Notes: ***B-STOCK: Slight surface marks ***


Danelectro invented the thickest, deepest amplifier tremolo in the late 1940's. Billionaire brings back this original Danelectro technology for the richest tremolo tones ever. One listen and this will be a prized part of your arsenal.
Read more
 1 in stock $51.44
Danelectro Billionaire Pride Of Texas Overdrive Pedal
Cat: 676311 Rel: 09 Mar 18
 
Overdrive effect pedal for electric guitar
Notes: The 'Pride of Texas' recreates that 'holy grail' bluesy tone of one of the greatest and most influential guitar players to walk the earth, fattening up your signal without losing clarity or voice. Ideal for both single coils or humbuckers, the 'Pride of Texas' provides plenty of boost for crunchy rhythm or screaming lead solos.
Read more
MRP:$121.26 SAVE 51%
 1 in stock $59.50
Click for better price!
or call +44 20 7424 1960
quote 676311
Danelectro The Breakdown Boost Overdrive Pedal
Cat: 727397 Rel: 13 May 19
 
Vintage style boost/overdrive effects pedal
Notes: Rewind to 1968. Famous guitar god uses this pedal to record his first album. Entire planet goes nuts. Inexplicably, the pedal then disappears. Until now. Danelectro resurrects this awesome, incredibly organic sounding pedal. 6 position "Break Up" control takes your guitar signal and slams the front of your amp with increasing punch. Positions 1 through 3 are ear-friendly and have "leave on all the time" potential. Positions 4 through 6 grab you and knock you back against the nearest piece of concrete. But in the most pleasant way. Caution: Do not listen to this... unless you want it to be your life companion.
Read more
 2 in stock $118.31
Danelectro The Breakdown Boost Overdrive Pedal (B-STOCK)
Cat: 792809 Rel: 13 May 19
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Rewind to 1968. Famous guitar god uses this pedal to record his first album. Entire planet goes nuts. Inexplicably, the pedal then disappears. Until now. Danelectro resurrects this awesome, incredibly organic sounding pedal. 6 position "Break Up" control takes your guitar signal and slams the front of your amp with increasing punch. Positions 1 through 3 are ear-friendly and have "leave on all the time" potential. Positions 4 through 6 grab you and knock you back against the nearest piece of concrete. But in the most pleasant way. Caution: Do not listen to this... unless you want it to be your life companion.
Read more
 1 in stock $117.24
Digitech Drop Polyphonic Drop Tune Pedal
Cat: 548856 Rel: 06 Oct 14
 
Polyphonic drop tune pedal with range from 1 semitone to 1 octave
Notes: The DigiTech Drop is a dedicated polyphonic drop tune pedal that allows you to drop your tuning from one semitone all the way down to a full octave. Get down-tuned chunk without having to change guitars! The Drop also features a momentary/latching switch. With the switch set to momentary, you can turn the Drop into a true performance pedal. Fast trills and roller-coaster pitch dips are at the tip of your toes.

Controls:
EFFECT SELECTOR KNOB- Selects which of the Drop effect settings is used when the effect is active.
MOMENTARY ON/OFF SWITCH - Selects how the effect footswitch will operate. Setting this switch to "ON" will cause the footswitch to act as a momentary switch (the effect will be enabled or disabled only as long as the footswitch is pressed and held). Setting this switch to "OFF" will cause the footswitch to act as a standard latching on/off switch.

Drop Effects Settings:
Setting 1 - Transposes guitar signal down 1 semitone
Setting 2 - Transposes guitar signal down 2 semitones
Setting 3 - Transposes guitar signal down 3 semitones
Setting 4 - Transposes guitar signal down 4 semitones
Setting 5 - Transposes guitar signal down 5 semitones
Setting 6 - Transposes guitar signal down 6 semitones.
Setting 7 - Transposes guitar signal down 7 semitones
Setting OCT - Transposes guitar signal down 1 octave.
Setting OCT + DRY - Transposes guitar signal down 1 octave and adds dry signal
Read more
 1 in stock $118.83
DiMavery DP1 Distortion Pedal
Cat: 700851 Rel: 31 Aug 18
 
Mini distortion effects pedal
Notes: - Distortion from hard rock to metal
- Compact size for more space on the pedal board
- Rugged metal housing
- Robust footswitch
- True bypass
- Controls: Level, Tone, Gain
- Connections via 6.3 mm audio jacks
- AC adaptor not included
Read more
 1 in stock $39.40
DiMavery TP1 Tube Pusher Overdrive Pedal
Cat: 700858 Rel: 31 Aug 18
 
Mini overdrive effects pedal
Notes: - Top boost mode
- Compact size for more space on the pedal board
- Rugged metal housing
- Robust footswitch
- True bypass
- Controls: Level, Tone, Gain, Mode
- Connections via 6.3 mm audio jacks
- AC adaptor not included
Read more
 1 in stock $40.00
DOD Rubberneck Analogue Delay Pedal
DOD
Cat: 638955 Rel: 20 Oct 17
 
Analog delay effects pedal with tap tempo & built-in effects loop
Notes: The new DOD Rubberneck Analog Delay has double the features with the cool new double-wide chassis. The Rubberneck boasts over a second of warm and musical 100% analog repeats you crave, along with tap-tempo, subdivisions, and tails. Double concentric knobs give you independent control of the Modulation Rate and Depth as well as Gain and Tone of the delay.

Double footswitches allow for unique extended features like user customizable momentary control of oscillation and momentary control of the dizzying pitch sweep of "Rubbernecking." These extended features are controlled by individual clear mini knobs that double as multi-colour LED status indicators. Feedback loop send/return, remote footswitch control, true bypass, and rugged metal construction, make the Rubberneck Analog Delay the must have delay of the year.

The Rubberneck also has jacks to allow FS3X 3-button remote foot switching, and a send and return so you can add external effects to the delay path.

The DOD Rubberneck uses a 9VDC power supply to easily integrate into your existing pedalboard.
Read more
 1 in stock $206.58
Earth Quaker Devices Acapulco Gold V2 Power Amp Distortion Pedal
Cat: 781143 Rel: 14 Jul 20
 
Distortion pedal
Notes: The Acapulco Gold is a dirt-simple distortion Device modeled after the sound of a cranked vintage Model T amplifier, bringing the openness, clarity, and crunch that only a dimed tube amp can provide, at a fraction of the size, and without expensive maintenance costs!

Since tone is in the hands, the controls of the Acapulco Gold are as simple as possible. The footswitch turns the pedal on and off, and the giant knob controls the output volume. That's it. The rest is at your fingertips. Want less gain? Turn down your guitar's volume knob. Need a darker rhythm tone? Roll back your guitar's tone control. Easy, right?

Big Knob: The big knob sets the output level, sometimes known as Volume. PLEASE BE CAREFUL, the Acapulco Gold is extremely loud!

With your guitar's volume all the way up, the Acapulco Gold roars like a wide-open Model T on the verge of explosion. At just-barely-backed-off, the Gold becomes a raunchy overdrive. At minimum guitar volume settings, the Acapulco Gold delivers a hazy, Nashville-sounding spank to your tone.

How about this? If your guitar has separate volume and tone controls for each pickup and a three-way selector switch, this little one-knob banger becomes a three-channel tone monster at the flick of your wrist!

This device is true bypass and uses electronic relay-based switching. Audio will not pass without power.

This device can be powered by a 9v battery or a standard 9-volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise.

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs

Current Draw: 18 mA

Read more
MRP:$181.89 SAVE 20%
 3 in stock $145.95
Click for better price!
or call +44 20 7424 1960
quote 781143
Earth Quaker Devices Afterneath V3 Enhanced Otherworldly Reverberator Pedal
Notes: Giant ambience from this cleverly designed reverb pedal. Straightforward, intuitive approach with a clever 'drag' control to spread out and separate the individual digital delay lines.

Supplier notes:
The Afterneath sounds a lot like it looks - a wizard bursting forth from ethereal cave and ready for the ambient battle.

Once inside the cave, a reflection of light from an unknown source catches your eye, and you notice a bizarre sheen on the walls of the cave. You timidly inch closer to the walls of the cave. Placing your hand gently on the cavern wall, you feel the rock move. The cave is alive! Alarmed, you emit a loud gasp, which reverberates throughout the subterranean landscape. Upon further listening, it appears as though the reverberations of your voice are in fact a swarm of short digital delays which may be used to create wild and cavernous reverbs, or scattered, short, rhythmic delays with bizarre characteristics.

Take a moment to consider your Intelligence and Wisdom scores, as well as your spell inventory before proceeding further. You have seven spells at your disposal.

Will you cast "Length," which controls the decay length of the reverb?
What about "Diffuse," which adjusts the spread of the reverb? With your wand (or just the knob) turned counterclockwise, the reverb is sharper with more attack, resulting in a stuttering sputter of individual early reflections. Clockwise casts a washy, more ambient-sounding hex.

Overwhelmed by fear, you hastily cast "Dampen!" As you shout the incantation, you notice that a counterclockwise variation of this spell results in brighter tones, while as you rotate your wand clockwise; you hear darker tones with a mellower top-end. It's almost as if your magic changes the hardness of the cavern walls, and thus the tonal characteristics of the reverb!

Elsewhere in your book of magic is "Drag," which separates the individual digital delay lines, literally dragging them through the very fabric of time and space towards an unknown event horizon from which they may never return. Clockwise "Drag" positions will gather the delay lines close together for a more reverb-like effect. Turn the "Drag" counterclockwise, and the delay lines will begin to pull apart for a scattered ping-pong delay effect.

The Drag can be put under voltage or expression control using the "EXP" jack located on the side and operates in 9 different modes which are selected by the small "Mode" control. These modes are: Unquantized, Unquantized with slew, Unquantized volt/octave,
Chromatic scale, Major scale, Minor scale, Pentatonic scale, Octaves & fifths and Octaves. These modes drastically change the way the Drag control functions, especially while using an expression control or CV.

The "Reflect" alters the depth of the cave, and with it the regeneration of the reverb. This acts as a feedback control and will self-oscillate if cast by a high-level user. Turn clockwise for more wash and echoes, counterclockwise for less.

Finally, the "Mix" alters the alchemical balance between the input signal and the effect. The Afterneath does not go fully wet but does lower the level of the input signal as you raise this control to create the appearance of a fully wet reverb.

Modes
The Modes control changes the way the Drag control functions. The LED will change colors indicating which mode you are in.

1. Unquantized: Smooth, unquantized response over the operating range

2. Unquantized with Slew: Smooth, unquantized response over the entire operating range, but with a musical slew that is reminiscent of turning the varispeed knob on a vintage British tape delay. The "Drag" will lag behind the knob or cv changes, but then quickly catch up.

3. Unquantized Volt/Octave: Smooth and unquantized, yet scaled to align with the 1v/octave curve to allow melodic modulation of audio in the buffer, or control the frequency of self-oscillation like a voltage controlled oscillator.?

4. Chromatic Scale: Quantized 1v/octave to the chromatic scale?

5. Minor Scale: Quantized 1v/octave to the minor scale?

6. Major Scale (Lydian): Quantized 1v/octave to the major scale (Lydian)?

7. Pentatonic Scale: Quantized 1v/octave to the pentatonic scale?

8. Octaves & Fifths: Quantized 1v/octave to omit all but octaves and fifths?

9. Octaves: Quantized 1v/octave to omit all but octaves

Specifications:

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs

Current Draw: 100 mA

Input Impedance: 1 MO

Output Impedance: 500 O
Read more
MRP:$276.20 SAVE 22%
 5 in stock $214.44
Earth Quaker Devices Aqueduct True Pitch Vibrato pedal
Cat: 781154 Rel: 14 Jul 20
 
Vibrarto pedal
Notes: Aqueduct is a vintage-inspired pitch vibrato with eight modulation modes delivering synth-like sonar pulses, touch-sensitive frequency modulation, gentle rolling pitch-wobbles, steady kosmische pulsations, rapid trills, slimy sonic squiggles, whammy bar wiggles, pitch bends, pseudo-flange, and anything else your pitch-warped brain can picture in your murky mind's eye.

Controls
The controls are simple. Rate (1) adjusts the LFO speed which controls how quickly the pitch rises and falls. Depth (2) controls the LFO amplitude, adjusting the intensity of the vibrato effect. The rotary switch labeled Mode (3) selects between one of eight LFO waveshape and envelope combinations which drastically alter the character of the modulation and make Aqueduct adaptable to nearly any musical situation.

Modes
Sine: The smoothest and most subtle of all waveforms, sine waves are most commonly associated with classic amp-like vibrato. Plug in, turn on, and commence the Chooglin'.

Triangle: Triangle waves have a sharper rise and fall than sine waves with a more pronounced pitch bend at the peak of each LFO cycle.

Ramp: Like a triangle wave with a twist. The Ramp waveform has a sharp sonar pulse followed by a rapid downward slope with a synthesizer-like sustain and release. This is where things start to get a little weird.

Square: Square waves are the most rigid and abrupt of the waveforms. Rather than gliding smoothly between pitches, square waves produce an instant on-or-off transition between notes. Use this mode for trills when you get tired of doing hammer-ons and pull-offs.

Random: This waveform isn't a waveform at all as much as it's a drunken master of modulation who slurs your notes into an unpredictable assortment of greasy pitch-bends before disappearing at last call and leaving you stuck with the tab. It has a "warped record" effect at low Depth settings and becomes sloppier and more randomized as you increase the Depth control.

Env D: This is Envelope-Controlled Depth mode. The waveshape is set to a sine wave, the speed of which may be adjusted using the Rate control. The Depth control sets the sensitivity of the envelope - the point at which the effect kicks in as you play. In this mode, your pick attack sets the intensity of the modulation. The harder you dig in, the more pronounced the effect. Try it during your next motorik jam.

Env R: This is Envelope-Controlled Rate mode. In this mode, the input level (i.e. pick attack) controls the LFO rate. The LFO uses a sine waveshape. Play harder for faster modulation or lay low for slower modulation speeds. The Rate control adjusts the sensitivity of the envelope. Depth selects the LFO intensity.

Env P: This is Envelope-Controlled Pitch mode, which has been lovingly nicknamed "The My Bloody Valentine setting". If your instrument doesn't have a tremolo bar, it does now. In this mode, the LFO is set to a sine waveshape, and frequency modulation is controlled by the dynamics of your pick attack and not the LFO. Do yourself a favor and try this one with Flexi-Switching™.
Depth sets the wet/dry mix. This is the only mode that contains a wet/dry mix and may be set to taste to create touch-sensitive dynamic vibrato, chorus, flanger, or tactile pitch drops. Full counterclockwise is all dry, full clockwise is all wet. With this control set to noon you will get a 50/50 mix with a small amount of phase cancellation.
Rate sets the sensitivity and overall range of the pitch bend.

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs

Current Draw: 68 mA

Input Impedance: 1 MO

Output Impedance: <10 kO
Read more
MRP:$268.11 SAVE 17%
 2 in stock $222.29
Click for better price!
or call +44 20 7424 1960
quote 781154
Earth Quaker Devices Arpanoid V2 Polyphonic Pitch Arpeggiator Pedal
Cat: 781496 Rel: 14 Jul 20
 
Arpeggiator pedal
Notes: Welcome to the first dedicated compact polyphonic pitch arpeggiator effect pedal for electrical guitar! What does the Arpanoid do? The Arpanoid takes whatever you play and transforms it into an adjustable ascending or descending scale. It features 8 intuitive and expandable modes and will work on complex chords as well as single notes in any key. The Arpanoid has an all analog dry signal, all digital wet signal and true bypass switching. Like all EarthQuaker Devices pedals, this dude is handmade one at a time in sunny Akron Ohio.

1. Rate: Adjusts the speed of the sequence.

2. Up/Up-Down/Down Toggle: Switch to control the direction of the sequence. All the way left is up, the sequence will continually repeat going up. In the middle is up/down, the sequence will continually repeat going up then back down. All the way right is down, the signal will continually repeat going down.

3. Step: Selects how many notes there are in the sequence.

4. Wet: Level control for the effect signal. Unity is around noon.

5. Mode: 8 position selector switch to choose the octave and key:

Major: -1 octave to root.

Major: root to +1 octave.

Major: -1 octave through +1

Major: Random pattern

Minor: -1 octave to root.

Minor: root to +1 octave.

Minor: -1 octave through +1

Minor: Random pattern

6. Dry: Level control for the dry signal. Unity is around noon.

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 65 mA
Input Impedance: 1 MO
Output Impedance: <1 kO
Flexi-Switchr Technology
This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies are generally recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!
Read more
MRP:$308.53 SAVE 21%
 2 in stock $244.75
Earth Quaker Devices Arrows V2 Pre Amp Booster Pedal
Cat: 781561 Rel: 14 Jul 20
 
Pre-amp booster pedal
Notes: The Arrows is an all-discrete tone sculpting preamp booster. It was designed with the intention of adding an additional channel of gain to all your dirt pedals as well as brightening up neck pickups. It boosts midrange, tightens up the low end and makes the top end shine while adding some push to drive your dirt into blooming sustain with excellent harmonics. Its simple interface is no nonsense; a single control that will either boost or cut your signal. Use the Arrows to remove the muck from bass heavy fuzz pedals, push light overdrives into higher gains than you thought possible or even on its own to make your signal really pop with more pizazz. All analog, true bypass and handmade one at a time in the weird pit of Akron, Ohio.

Level: Adjusts Arrows output level. Clockwise is loud, counterclockwise is quiet.

This device is true bypass and uses electronic relay-based switching. Audio will not pass without power.

This device can be powered by a 9v battery or a standard 9-volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies are generally receommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs

Current Draw: 8 mA
Input Impedance: 10 MO
Output Impedance: <10 kO
Read more
MRP:$146.86 SAVE 24%
 1 in stock $112.27
Earth Quaker Devices Avalanche Run V2 Stereo Reverb & Delay with Tap Tempo Pedal
Cat: 781595 Rel: 28 Jul 20
 
Stereo reverb & delay pedal
Notes: The Avalanche Run is a dreamy stereosonic exploratory multi-tool that includes up to 2 seconds of delay time, reverse delay, tap tempo with subdivision control, switchable true bypass or buffered bypass with 5 different tail lengths (including a sound-on-sound style lo-fi looping mode) and an assignable expression control that maps the expression jack to a control of your choice, including the toggle! The delay section allows tweaking from tape emulation to bucket brigade styles with a twist of the wide-range Tone control. The cavernous, plate-style reverb has just a touch of modulation similar to the one found in our precious Dispatch Master only more lush with an adjustable Decay. Otherworldly reverse delay and dynamic swelling reverb settings are accessible through a 3-way toggle switch. And that's just the beginning...

1. Time: This controls the delay time and goes from 0ms to just under 2000ms.

2. Repeats: Controls the regeneration of the delay, from zero repeats to near infinite.

3. Tone: Controls the tone for the delay line only. Roll off highs to the left, roll off lows to the right and get a flat response in the middle.

4. Mix: The is the volume control for the delay line. This blends in the wet with dry until 1 o'clock, 1 o'clock to 3 o'clock boosts the wet signal over the dry and 3 o'clock up brings down dry until it is fully wet when all the way up.

5. Expression Jack Assign Switch: Use this switch to map the expression jack to one of the assigned controls.

Decay: Controls the reverb decay length

R Mix: Controls the reverb mix

Time: This takes over for the delay time control and is DRASTICALLY different than the interface control. Using the expression pedal to control the time will give you all kinds of wild effects that can not be achieved by turning the knob.

Repeats: Controls the delay repeats

D Mix: Controls the delay mix

Toggle: This takes over for the toggle switch and will cross fade from forward delay in heel down position to reverse delay in toe down position.

6. Ratio Selector Switch: Selects delay subdivisions when time is set by the "Tap" switch.

1/1: Quarter Note

3/4: Dotted 8th

2/3: Quarter Note Triplet

1/2: 8th Note

1/3: 8th Note Triplet

1/4: 16th Note

7. Decay: Controls the decay length of the reverb, short decay counterclockwise, long cavernous decay clockwise.

8. Toggle Switch (Mode Selector)

Normal: This is the standard delay and reverb mode

Reverse: This is reverse delay mode with standard reverb

Swell: This is the volume swell mode

9. Mix: This is the volume control for the reverb. Blends in the wet with dry until 1 O'clock, 1 O'clock to 3 O'clock boosts the wet signal over the dry and 3 O'clock up brings down dry until it is fully wet when all the way up.

The expression jack is located on the west side of the pedal. It is a TRS jack with the tip acting as the wiper.

Using a Moog expression pedal, with the output adjustment knob all the way up, is recommended. Any other expression pedal is not guaranteed to work with the Avalanche Run.

This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

For best results, please use the included 9v center-negative 1-amp DC power supply.

Dimensions: 4.65 x 4.15 x 2.25 in. (118 x 105 x 57 mm) with knobs
Current Draw: 410 mA
Input Impedance: 1 MO
Output Impedance: 100 O
Read more
MRP:$437.87 SAVE 24%
 1 in stock $332.33
Earth Quaker Devices Cloven Hoof V2 Fuzz Grinder Pedal
Cat: 781610 Rel: 28 Jul 20
 
Fuzz grinder pedal
Notes: The Cloven Hoof is the Hoof's evil twin. It looks a lot like the Hoof, only more, um . . . Cloven.

The tightness and clarity you loved about the Hoof has been kept, along with the wide range of fuzz sounds, and the rest was thrown away. NOS Germanium transistors? Nope! In their place, a set of four specially selected Silicon transistors were installed for cleaner cleans, higher gain, improved temperature stability, and a grittier, grindier, nastier fuzz tone with over 4x the gain of the original Hoof. The key resistors were replaced with with NOS Carbon Comp components to sprinkle a little bit of vintage flavor into the Cloven Hoof's searing fuzz fury. It's like they always say, "In with the old, out with the new".

The Tone and Shift controls remain intact, only now they're re-voiced for a smoother sweep, and more precise control over the Cloven Hoof's beefy low-end. Speaking of low-end, have you heard this thing on bass? Wow. Try the Cloven Hoof on a bass guitar. Seriously- you can still cut or boost the mids, and there's still a metric ton of output on tap, just do us a favor, and for the love of all that's Cloven, play this pedal with a bass guitar.

Controls:
1. Shift: This adjusts the mid content. Clockwise for scooped mids,
counterclockwise for boosted.

2. Tone: Bass to the left. Treble to the right

3. Level: Use this control to make the Cloven Hoof louder or quieter.

4. Fuzz: Clockwise for heavy, counterclockwise for light.

Tech Specs:

This device is true bypass and uses electronic relay-based switching. Audio will not pass without power.

This device can be powered by a 9v battery or a standard 9-volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 14 mA
Input Impedance: 150 kO
Output Impedance: <10 kO
Read more
MRP:$235.78 SAVE 26%
 1 in stock $174.02
Earth Quaker Devices Data Corrupter Modulated Monophonic Harmonizing PLL Pedal
Cat: 781617 Rel: 28 Jul 20
 
Harmonizing pedal
Notes: The Data Corrupter is a monophonic analog harmonizing PLL with modulation. It takes your input signal and brutally amplifies it into a crushing square wave fuzz tone that is then multiplied, divided and modulated to create a wild, yet repeatable, three-voice guitar synthesizer.

The Master Oscillator is the central nervous system at the heart of the Data Corrupter's cyberpunk hive mind. It feeds your input to the signal harvester in its original octave (Unison), one octave down (-1) or two octaves down (-2) for maximum compatibility with your preferred instrument and frequency register. Once you've chosen your input octave, then the Data Corrupter will perform its calculations and spit out an analog synthesized frequency, which can be pitch-bent for portamento or vibrato sounds by the Frequency Modulator! From there, you can blend in one of eight Subharmonic intervals up to three octaves below the input and mix in a square wave fuzz tone for maximum data corruption.

The Master Oscillator (1) is the central nervous system at the heart of the Data Corrupter's cyberpunk hive mind. The three-position switch on the Master Oscillator control panel labeled Root (2) feeds your input to the signal harvester in its original octave (Unison), one octave down (-1) or two octaves down (-2). Use the Master Oscillator's Root Switch to fine tune the Data Corrupter's tracking response for maximum compatibility with your preferred instrument and frequency register. Once you've chosen your input octave, the Data Corrupter will perform its calculations and spit out a synthesized frequency, the octave and/or interval of which may be selected via the Master Oscillator's eight-position rotary switch.

The Voice Mixer's Oscillator Control (3) adjusts the Master Oscillator blend.

The Frequency Modulator (4) applies pitch-bend modulation to the Master Oscillator. In Glide mode, you'll hear a smooth portamento as each note slides into the next. In Vibrato mode the pitch modulates up and down for a retro sci-fi laser effect.

The Subharmonic (5) assimilates the input signal into one of eight lower octave programs between one and three octaves below the original. For a more stable lower octave, set the Subharmonic's Root Switch to the Unison position, which divides the Square Wave input signal, and removes the Frequency Modulator from the Subharmonic signal path.

To unleash the cracked machine lurking within the mainframe, set the Subharmonic Root Switch to Oscillator and try not to look away as the sonic malware you just installed mangles your input signal into the sum and difference of both the Master Oscillator and Subharmonic with the Frequency Modulator applied to the upper and lower octaves.

If you think you're brave enough, set the Subharmonic Root Switch to Oscillator and try experimenting with different Master Oscillator and Subharmonic programs to wind up the doomsday clock and inch ever closer to the Singularity. Adjust the Voice Mixer's Subharmonic Control to set the lower octave volume.

Finally, (or is it?) the Square (6) control located top-left on the Voice Mixer blends in a fuzzed-out square-wave take of your input in its original octave.

The heart of this pedal is based around a CMOS Phase Locked Loop (PLL) IC. In a nutshell, the PLL takes your input signal and compares its phase and frequency against an oscillator, generates an output proportional to their difference then feeds it back to the oscillator. This then causes the oscillator to lock onto the input signal and generate a synthesized frequency. Pretty cool, right? This synthesized frequency is referred to as the Master Oscillator on the Data Corrupter.

This device takes its inspiration from the Electrax Synthax and the "Basic Frequency Synthesizer" by Ray Marston. Neither of these were really intended to be guitar effect pedals and a lot of work went into creating the Data Corrupter to provide excellent tracking and long sustain. We think you'll find it more expressive and accurate than pretty much any other PLL based effect pedal around.

This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Dimensions: 5.65 x 4.75 x 2.25 in. (144 x 121 x 57 mm) with knobs
Read more
MRP:$316.62 SAVE 24%
 2 in stock $241.38
Earth Quaker Devices Disaster Transport SR Advanced Modulated Delay & Reverb Machine Pedal
Cat: 781635 Rel: 28 Jul 20
 
Reverb & modulation delay pedal
Notes: The Disaster Transport SR is a dual delay with reverb and modulation. It was designed from the ground up to create an intense wash of lo-fi swirling tape styled echo. While it may look intimidating at first glance, it's actually pretty easy to navigate. The top row of controls are for delay A and the bottom row of controls are for delay B. Delay A is a 600ms delay with modulation and delay B is a 300ms delay with reverb. Both delays can be run separately, in parallel, in series or in series/parallel. To take it one step further, there are also expression controls for the repeats on delay A as well as bleeding delay A into delay B. The switching was designed so each delay can be used individually or in tandem with both true bypass or trails.

In addition to being used as a straight delay, straight reverb, rhythmic delay, modulated delay and old school tape-style echo, the Disaster Transport SR can also be used to create a wide variety of wild sounds ranging from warped records, clanging flange, smooth chorus, echoed out squalls and various other-worldly effects that will blow your mind, man. If you are a fan of old school tape delay and crazy lo-fi sounds, you will get hours of enjoyment every time you plug into the Disaster Transport SR.

The controls for delay A and B are separated by row. The top row is for delay A and the bottom row is for delay B.

Time: Controls the delay time from about 30ms up to 600ms.

Repeats: Controls how many regenerations of the signal there are. This ranges from one single repeat through an endless wash into self oscillation. This can also be controlled via an expression pedal. The Moog EP-2 is recommended.

Mix: Level control for the wet signal. Unity is around center, anything above is boosted. Boosting this works great when using a distorted signal. Please keep in mind this is a gain control, a bit of hiss is normal when it's above unity.

Depth: Controls the intensity of the modulation, from no modulation to all out seasick pitch bends.

Rate: Controls the rate of the modulation. The LED for delay A flashes in time with the modulation to visually show where the rate is set.

Bleed: This feeds delay A into delay B, post reverb (see block diagram for visual explanation). Use this control for series or series/parallel operation to create rhythmic repeats, extra long delay time or an all out echo wash. This can also be controlled via an expression pedal. The Moog EP-2 is recommended. When using the bleed, experiment with the repeat controls on each delay line. Try using them in different settings, both together and individually, for different timing and textures.

Delay B Controls
Reverb: Controls the amount of reverb added to the input of delay B.

Mix: Level control for the wet signal. Unity is around center, anything above is boosted. Boosting this works great when using a distorted signal. Please keep in mind this is a gain control, a bit of hiss is normal when it's above unity.

Repeats: Controls how many regenerations of the signal there are. This ranges from one single repeat through an endless wash into self oscillation.

Time: Controls the delay time from about 30ms up to 300ms.

The switches for both delays switch the inputs only. The outputs are always connected. This allows you to have trails by always leaving the bypass switch engaged or to use the bypass switch as the master on/off for true bypass. Additionally, you can feed delay A in to delay B with the bleed control without having delay B switched on for a cleaner rhythmic delay.

Tech Specs:

This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 5.65 x 2.25 in. (121 x 144 x 57 mm) with knobs
Current Draw: 107 mA
Input Impedance: 500 kO
Output Impedance: <1 kO
Read more
MRP:$429.79 SAVE 26%
 1 in stock $319.97
Earth Quaker Devices Dispatch Master V3 Digital Delay & Reverb Pedal
Cat: 781637 Rel: 28 Jul 20
 
Delay & reverb pdeal
Notes: The Dispatch Master is a hi-fi digital Delay & Reverb Device that combines independent delay and reverb effects into one space-saving enclosure, so you can keep deep ambient echoes (or just a quick slapback) on speed-dial.

The best-selling EarthQuaker Devices pedal just got better with new Flexi-Switchr Technology. Want to dip into ambient delay and reverb sounds for just one note? Press and hold the footswitch for as long as you use the effect, release it when you're finished, and resume your regularly scheduled dry sound. To use the Dispatch Master as a normal effects pedal, press the switch once to activate and again to bypass.

To Use Both Effects at the Same Time, Simply Adjust all Controls to Taste:

The Mix (1) control is a wet/dry blend that adjusts the overall level of the affected signal.

Time (2) sets the delay time from 0ms to 1500ms (1.5 seconds).

Reverb (3) controls the amount of reverb. Counterclockwise is less reverb, clockwise is more reverb.

Repeats (4) controls the regeneration of the delay signal. When the Repeats control is set to maximum, you'll get infinite repeats without runaway self-oscillation, which makes it great for creating drones, dialing in the ultimate post-rock guitar sound without feedback, or just having fun.

To Use the Dispatch Master as a Delay Only:

Turn the Reverb control all the way down.

Adjust the Time, Repeats, and Mix controls to taste:

To Use the Dispatch Master as a Reverb Only:

Turn the Time and Repeats controls all the way down

Adjust the Reverb and Mix controls to taste

THIS IS IMPORTANT! In Reverb-only mode, the Repeats control has a secondary function. It can be used to adjust the decay, depth, and tonal quality of the reverb! Turn it up for more dynamics and a thicker tone.

This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 78 mA
Input Impedance: 1 MO
Output Impedance: <1 kO
Read more
MRP:$276.20 SAVE 21%
 1 in stock $217.80
Earth Quaker Devices Dunes V2 Mini Mega Ultimate Overdrive Pedal
Cat: 781639 Rel: 28 Jul 20
 
Overdrive pedal
Notes: Dunes is a condensed take on our highly popular Palisades "808-style" overdrive. All the glitz and glamour of the original Palisades has been stripped away, leaving only the bare essentials required for a rippin' mid-boosting transparent overdrive. It has all the great tone of the grown-up Palisades but with a simplified interface and a smaller footprint!

The Dunes features the same Gain, Tone and Level controls as the Palisades, along with Earth Quaker's favoured voice and bandwidth settings, as well as the Normal/Bright toggle. The selectable clipping Voices are: MOSFET for a tight crunchy sound (Palisades' Setting 3); Silicon Asymmetrical clipping for tighter light gain OD closest to the classic 808 sound (Palisades' Setting 4), and None, which goes from clean boost to gritty, pure op-amp distortion with a massive volume boost (Palisades' Setting 1). The two Bandwidth settings are Stock for the classic tone (Palisades' Setting 3) and Full Range for more low end (Palisades' Setting 5).

Controls:
1. Tone: Brighter clockwise, warmer counterclockwise

2. Voice: MF- MOSFET diode clipping, N- No diode clipping, Si- Silicon diode clipping

3. Gain: Adjusts the drive, dirtier clockwise, cleaner counterclockwise

4. Normal/Bright: Normal is a warm full tone, Bright is livelier tone with more chime

5. Volume: Sets the output level

6. Bandwidth: Left is brighter with more emphasis on the mids, right is full range for more low end

Tech Specs:

This device is true bypass and uses electronic relay-based switching. Audio will not pass without power.

This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies, are a;ways recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 16 mA
Input Impedance: 500 kO
Output Impedance: <1 kO
Read more
MRP:$262.72 SAVE 15%
 1 in stock $222.29
Click for better price!
or call +44 20 7424 1960
quote 781639
Earth Quaker Devices Erupter	Ultimate Fuzz Tone Pedal
Cat: 781640 Rel: 23 Jul 20
 
Fuzz tone pedal
Notes: When's the last time you turned up your favorite fuzz pedal to anything but eleven? If there's one true thing about rock n' roll, it's that it sounds best cranked all the way up. But where do we go from here? We go one louder. Enter the Erupter.

The Erupter is the result of over two years' worth of tone-chasing, tweaking, and experimentation in search of the ultimate classic fuzz tone with a big low end, a biting top end without being too harsh, and just enough output to politely send a tube amp over the top to deliver a well-rounded and defined fuzz tone with just enough pummeling intensity, so you can rock n' roll all night and still get to bed at a reasonable hour.

It's the perfect fuzz... just sayin'.

Controls:
Bias: This control has a center detent for the perfect fuzz setting. When in the center position, the tone will be big and round with a slight volume boost and great sustain. As you turn this counterclockwise it becomes more gated with lower output. As you turn this clockwise it becomes louder and more refined.

Tech Specs:

This device is true bypass and uses electronic relay-based switching. Audio will not pass without power.

This device can be powered by a 9v battery or a standard 9-volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 9 mA
Input Impedance: 500 kO
Output Impedance: <1 kO
Read more
MRP:$214.22 SAVE 28%
 1 in stock $154.93
Earth Quaker Devices Grand Orbiter V3 Phase Machine Pedal
Cat: 781668 Rel: 28 Jul 20
 
Phase machine pedal
Notes: Grand Orbiter is a 4 stage OTA-based phaser with a diverse feature set that can go from stationary and resonant to slow and mellow and on through fast and swirly. It has three way toggle switch to select between the ranges of modulation. The master Rate control fine tunes the speed of the LFO in each of these modes and the flashing red LED acts as a visual indicator, even when the effect is in bypass mode. The Depth control blends the shifted signal in with the dry signal and controls the intensity of the effect. The Sweep control governs the peak frequency of the phased signal's tone, turned full clockwise the sweep is lively and intense, whereas turning counter clockwise yields a darker, more laid back peak. The Resonance provides a wide range of control over regeneration and at higher settings adds a more pronounced and resonant tone. You can also use the Grand Orbiter as a true pitch vibrato with the "Phase/Vibrato" switch. When in "Vibrato" mode, the dry signal is removed and the Depth controls acts as a volume control. This pedal is 100% analog, true bypass and built by entirely by hand in beachy Akron, Ohio.

1. Sweep: Controls the frequency peak of the sweep. Higher peak clockwise, lower peak counter clockwise.

2. Rate 1,2,3: Changes the range of the speed control. Rate 1 is slow mode, Rate 2 is LFO kill to use the Orbiter as a fixed resonant filter, Rate 3 is fast mode.

3. Rate: Controls the speed of the LFO. Faster clockwise, slower counterclockwise.

4. Depth: Controls the amount of phase effect mixed with dry signal. Clockwise for more intense phasing, counterclockwise for less. In "Vibrato" mode, this acts as a volume control.

5. Phase/Vibrato: Cuts the dry signal to create a vibe/vibrato effect depending on the setting of the other controls. Vibrato is created by turning the resonance down low.

6. Resonance: Controls the regeneration of the phased signal. More resonant clockwise, more subtle counterclockwise.

Tech Specs:

This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 15 mA
Input Impedance: 1 MO
Output Impedance: <1 kO
Read more
MRP:$276.20 SAVE 24%
 3 in stock $211.07
Earth Quaker Devices Hoof Reaper V2 Double Fuzz With Octave Up Pedal
Cat: 781683 Rel: 14 Jul 20
 
Dual fuzz pedal
Notes: The Hoof Reaper features Earth popular Hoofr and Tone Reaper fuzz pedals in one handy enclosure with the added bonus of an old school analog octave up. It was originally released as a special limited run item back in 2010 and demand was so high that Earth Quaker decided to reintroduce it back into their line. Capable of creating everything from subtle octave-up overtones through crushing octave squalls that simulate exploding stacks of amps. Each effect can be used individually as well as in series but the order of effects is preset for optimum performance.

Controls:
Hoof
1. Level: Controls the output volume

2. Fuzz: Controls sustain and gain

3. Tone: Treble to the right. Bass to the left

4. Shift: Controls the mid frequencies. More pronounced to the left. Scooped to the right.

Tone Reaper
5. Level: Controls the output volume

6. Fuzz: Controls the sustain and nature

7. Tone: Treble to the left. Bass to the right

Dimensions: 4.75 x 5.65 x 2.25 in. (121 x 144 x 57 mm) with knobs
Current Draw: 18 mA

Hoof
Input Impedance: 130 kO
Output Impedance: <10 kO

Tone Reaper
Input Impedance: 47 kO
Output Impedance: <1 kO

Octave
Input Impedance: 160 kO
Output Impedance: <10 kO
Read more
MRP:$437.87 SAVE 23%
 1 in stock $335.71
Earth Quaker Devices Levitation V2 Reverberation Machine Pedal
Cat: 781688 Rel: 23 Jul 20
 
Reverberationmachine pedal
Notes: Have you ever wanted your tone to soar like a majestic eagle in a vast canyon? Perhaps you are a simpler mortal and just want your tone to echo like the cries of a sparrow in a small room... Now you can do both like a champ plus a whole lot more! Welcome to the Levitation reverberation machine! This Levitation device is a vintage-voiced reverb that aims to fit somewhere between dirty sixties chambers, classic spring and the big, ringing plate reverbs of days gone by. Four knobs and one switch control quite a bit more than you'd expect. Want a slap back small room sound? Set all of your controls to the minimum and use the mix to dial in the sound of room devoid of any thing but a guitar and amp. Want to revel in infinite spatial oscillations? Flip the toggle to Long, turn up the Atmosphere and Decay then tune out. Dial in a bright chiming slap back by turning the Tone all the way counterclockwise and reducing the Decay. Dime everything for a rattling, full-bandwidth assault. You are only limited by your imagination!

Controls:
1. Mix: This controls how much wet signal is blended in with the dry. More reverb clockwise, less counterclockwise.

2. Length (Toggle): Broad stroke control for decay time. Shorter to left, longer to the right.

3. Decay: Controls the length of the reverb decay. Longer clockwise, shorter counterclockwise.

4. Tone: This is an input bandwidth control for the reverberated signal. All the way clockwise reduces all low end content to make a brighter reverb, turning counterclockwise allows more low end to pass through resulting in a fuller reverberated tone.

5. Atmosphere: This is a harmonic regeneration control, it feeds the upper frequencies of the reverb trails back through to create a more harmonic (ringing) reverb. More atmosphere clockwise, less counterclockwise.

Tech Specs:
Flexi-Switchr Technology
This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Power
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 72 mA
Input Impedance: 1 MO
Output Impedance: <10 kO
Read more
MRP:$268.11 SAVE 26%
 1 in stock $198.71
Earth Quaker Devices Night Wire V2 Harmonic Tremolo Pedal
Cat: 781691 Rel: 28 Jul 20
 
Tremolo pedal
Notes: Really clever and creative approach to tremolo effects here: the signal is split into high and low frequencies, then the signals are modulated with low-frequency oscillators for funky, organic movement.

Supplier notes:
The Night Wire is a feature-rich harmonic tremolo. What is harmonic tremolo? In short, the signal is split into high pass and low pass filters, then modulated with an LFO that is split 180 degrees. The Night Wire takes the traditional harmonic tremolo a few steps further by allowing the center point of both filters to be adjusted for different tones. The filter frequency has three modes: Manual, LFO and Attack. In Manual mode, the center point can be set to a fixed position with the frequency control. In LFO mode, the filters are continuously swept and the frequency control adjusts the speed. In Attack mode, the filters are dynamically swept according to pick attack and the frequency control acts as a range control, much like a standard envelope filter. The tremolo section has two modes, Manual and Attack. In Manual mode, the speed of the tremolo is governed by where the rate control is set. In Attack mode the speed is controlled by pick attack and the rate controls the sensitivity; the harder you pick, the faster the rate and vice-versa. The tremolo can be subtle and shimmery or full-on throbbing depending on where the depth control is set. With the depth set to zero, the Night Wire will act like a fixed filter, phase shifter or envelope-controlled filter depending on which mode the filter frequency is in. It also features a cut/boost volume control to get your levels just right.

Controls:
1. Depth: Adjusts the depth of the tremolo. More clockwise, less counterclockwise. When fully counterclockwise, the amplitude modulation will be removed and the Night Wire will function as a fixed filter, envelope controlled filter or phaser depending on where the Frequency toggle is set.

2. Rate Toggle: This toggle lets you select between two ways to control the speed of the tremolo. Attack lets you adjust the speed by pick attack. In this mode, the Rate knob controls the sensitivity of the dynamic tremolo. The higher the rate and harder you pick, the faster the speed will rise and vice versa. In Manual mode, the Rate control adjusts the speed like a common tremolo.

3. Rate: In Manual mode, this controls the speed of the tremolo. Faster speed clockwise and slower speed counterclockwise. In Attack mode, this controls the sensitivity of the dynamic tremolo. The higher the Rate and harder you pick, the faster the speed will rise and vice versa.

4. Level: Sets the output level, unity is around noon.

5. Frequency Toggle: This toggle lets you select one of 3 different ways to control the center frequency of the filter section. In LFO mode, the frequency is continuously swept by an LFO. In this mode, the Frequency knobs adjusts the speed of the LFO. In Manual mode, the frequency is determined by where the Frequency knob is set. In Attack mode, the center frequency is dynamically controlled by pick attack and the Frequency knob adjusts the sensitivity.

6. Frequency: Controls the center frequency of the filters in Manual mode: higher clockwise, lower counterclockwise. In LFO mode this controls the rate of the sweep: faster clockwise and slower counterclockwise. In Attack mode this controls the sensitivity of the envelope: lower Frequency gives slower rise and lower peak, higher Frequency gives faster rise and higher peak. Simple, right?

Tech Specs:
Flexi-Switchr Technology
This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Power
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 65 mA
Input Impedance: 1 MO
Output Impedance: <1 kO
Read more
MRP:$268.11 SAVE 20%
 1 in stock $215.55
Earth Quaker Devices Organizer V2 Polyphonic Organ Emulator Pedal
Cat: 781694 Rel: 14 Jul 20
 
Organ emulator pedal
Notes: The Organizer is a polyphonic organ emulator designed to mimic the organ tones of yesteryear crossed with the highly unique "Guitorgan". It has a warm and very analog feel with a hint of Leslie warble that is unlike other modern octave shifters. It is simple to dial in and tracks chords as well as single notes perfectly all over the neck on both guitar and bass. Not only can the Organizer be used on strings, it has been widely used on everything from vocals and synths to horns and drums. If it makes sound, the Organizer can handle it! The Organizer uses a mix of analog and DSP circuitry with true bypass switching and an all analog dry signal path.

Controls:
1. Up: Level control for the octave up.

2. Down: Level control for the octave down.

3. Choir: This control takes a mix of the octave Up and octave Down setting and regenerates it. The end result is an additional 2 octaves up, 2 octaves down and direct signal with a slight delay that adds a "church organ" like feel. This control only works if the octave Up and octave Down are in use.

4. Lag: Delay control for the wet signal. Full counterclockwise is minimal delay. Delay time increases as it rotates clockwise.

5. Tone: Rolls off the high end as you dial it counterclockwise.

6. Direct: Level control for the analog dry signal.

Tech Specs:
Switching
This device is true bypass and uses electronic relay-based switching. Audio will not pass without power.

Power
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 81 mA
Input Impedance: 1 MO
Output Impedance: 500 O
Read more
MRP:$262.72 SAVE 26%
 1 in stock $193.11
Earth Quaker Devices Palisades V2 Mega Ultimate Overdrive Pedal
Cat: 781697 Rel: 14 Jul 20
 
Overdrive pedal
Notes: After loads of requests, for an overdrive based on the legendary TS808, Earth Quaker Devices finally buckled. Tests were ran with every popular clone on the market as well as several vintage originals, compared, contrasted and took loads of notes. It was exhausting but informative. In the end, Earth Quaker Devices used their ears and came up with the most versatile relative of the 808 available today.

With 6 different clipping voices, 5 bandwidth settings and 2 gain channels, you will be hard-pressed to not find a setting that will wipe every mid-boosting overdrive off your board. The Palisades is a versatile dude that will give you years of loving companionship.

Controls:
1. Boost: Sets the level of the output boost.

2. Gain A: Sets the gain for the Channel A (lower gain)

3. Volume: Sets the output level.

4. Gain B: Sets the gain for Channel B (higher gain)

5. Tone: Brighter clockwise, warmer counterclockwise.

Rotary Switches

6. Voice: This sets the nature of the Palisades distortion by changing the clipping diodes.

No diodes: The most open and least distorted.

LED clipping: Light clipping with a lot of volume.

Mosfet clipping: Light gain OD with great harmonics.

Asymmetrical Silicon clipping: Tighter light gain OD closest to stock 808.

Symmetrical silicon clipping: Tighter distorted tone.

Schottky Diode clipping: Looser fuzzy tone.

7. Bandwidth: This sets the overall tone and gain structure of the Palisades. 1 is the thinnest setting with the least amount of gain and 5 is the fattest setting with the heaviest gain. Everything else is in between. This control has a major effect on all the settings of the Palisades, especially the Gain and Voice controls.

Toggle Switches

8. Normal/Bright: Normal is a warm full tone. Bright is livelier tone with more chime.

9. Buffer: Turns the input buffer on or off. ON is a tighter and brighter tone while OFF is a warmer tone with more sag. The buffer is part of the drive circuit & is only available when the Palisades is activated.

Foot Switches

10. Boost: Activates the output level boost, Features Flexi-Switching.

11. Gain B: Activates Gain Channel B, Features Flexi-Switching.

12. Activate: True bypass switch

Tech Specs:
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages!

Dimensions: 4.75 x 5.65 x 2.25 in. (121 x 144 x 57 mm) with knobs
Current Draw: 25 mA
Input Impedance: 500 kO
Output Impedance: <10 kO
Read more
MRP:$335.48 SAVE 30%
 1 in stock $235.45
Earth Quaker Devices Park Fuzz Sounds Vintage Germanium Fuzz Pedal
Cat: 781700 Rel: 14 Jul 20
 
Fuzz pedal
Notes: Park Amplifiers and Earth Quaker Devices have teamed up to bring you a faithful recreation of the original Park Fuzz Sound! While it retains the original sounds, there are several modern upgrades to improve performance, reduce extraneous background noise and add versatility:

Metal film resistors and caps for quieter performance.

NOS matched germanium transistors for consistent, reliable tones

Wider fuzz range, more than twice the original

Smaller footprint, true bypass switching with LED indication and power supply compatible

Controls:
1. Volume: This is the level control, louder to the right, quieter to the left.

2. Treble/Bass: This is the tone control, thicker tones to the right, brighter to the left.

3. Fuzz: This is the gain control, more fuzz to the right, less to the left.

Tech Specs:
This device can be powered by a standard 9 volt DC power supply intended for musical instruments with a negative center 2.1mm barrel or a 9v battery. Even though this pedal is a germanium fuzz, it will play nice on a daisy chain due to it's internal voltage regulation.

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 3 mA
Input Impedance: 100 kO
Output Impedance: <1 kO
Read more
MRP:$268.11 SAVE 23%
 1 in stock $206.58
Earth Quaker Devices Plumes	 Small Signal Shredder Overdrive Pedal
Cat: 781709 Rel: 28 Jul 20
 
Overdrive pedal
Notes: Plumesr is a unique, all-analog approach to a classic tube-like overdrive circuit offering 3 different clipping voices, loads of headroom and almost three-dimensional clarity that will push your amp over the edge. The reimagined tone control is finely tuned to sculpt low end, clear top end, and focus midrange with blooming sustain.

Controls:
1. Level: This controls the output volume.

2. Gain: This controls the amount of drive.

3. Tone: More bass to the left, more middles in the middle and more treble to the right.

4. Clipping Modes (3-Way Toggle):

1. Symmetrical LED clipping - More Crunch and Compression.

2. No clipping - Wide open OpAmp drive for clean boost.

3. Asymmetrical silicon diode clipping - More transparency with a loose feel.

Tech Specs:
Flexi-Switchr Technology
This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Power
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 25 mA
Input Impedance: 10 MO
Output Impedance: 100 O
Read more
MRP:$141.47 SAVE 23%
 4 in stock $108.90
Earth Quaker Devices Pyramids Stereo Flanging Device Pedal
Cat: 781712 Rel: 28 Jul 20
 
Flanger pedal
Notes: Pyramids is a Stereo Flanging Device with five presets, eight flanger modes, tap tempo, tap subdivision, a multifunction Modify control, positive and negative Feedback, and a variable Mix control, which is something you don't see on a flanger every day.

Built upon the same proprietary DSP architecture as the Avalanche Run™, Pyramids delivers convincing jet-engine roar, authentic through-zero tape-style warble, infinite barber pole sweeps, flexible I/O routing, and the ability to re-trigger the LFO cycle via footswitch opens up a fourth dimension of rhythmic possibilities that's sure to tickle your third ear.

Controls:
1. Manual: Controls the delay time of the modulated signal. Manual can also be controlled via expression pedal.

2. Rate: Controls the speed of the LFO as well as the rise time in Trigger Up mode and fall time in Trigger Down mode. The Rate control has three ranges of operation: Slow, Normal and Fast. These modes are selected by the Rate & Tap toggle switch.

3. Width: Controls the frequency range of the LFO sweep. You might also think of it as a depth control for the LFO.

4. Mix: This is the volume control for the modulated signal. The modulated signal gets louder when you turn it clockwise and quieter when you turn it counterclockwise.

5. Activate Footswitch: The activate switch features our Flexi-Switch technology! This relay-based true-bypass switch allows for momentary or latching operation.

6. Feedback: Regeneration control for the modulated signal.

7. Rate & Tap Toggle Switch: Normal (center position) is 1:1. The tempo you tap in is the tempo Pyramids will spit out. When set to Slow (left position), the tempo you tap is divided for a slower sweep. When set to Fast (right position), the tempo you tap is multiplied and delivers a faster sweep.

8. Modify: The behavior of this control depends upon which mode you're using:

Classic: Tone control for the modulated signal. Clockwise cuts the low end and allows the high frequencies to pass through. Counterclockwise cuts the high end and allows bass frequencies to pass through.

Through-Zero: Delay time for the unmodulated dry signal. This controls where in the LFO cycle the through-zero point occurs, which is where you'll hear the most drastic cancellation.

Barber Pole Up: Tone control for the modulated signal. Clockwise from center is a high pass filter. Counterclockwise from center is a low pass filter.

Barber Pole Down: Tone control for the modulated signal. Clockwise from center is a high pass filter. Counterclockwise from center is a low pass filter.

Trigger Up: Sensitivity control for the sweep. This controls how quickly the re-triggering reacts to your pick attack.

Trigger Down: Sensitivity control for the sweep. This controls how quickly the re-triggering reacts to your pick attack.

Step: Adjusts the glide between steps. Low Modify settings produce sharp, stair-stepped transitions between steps. Higher Modify settings introduce a smoother glissando effect.

Random: Adjusts the glide between steps. Low Modify settings produce sharp, stair-stepped transitions between steps. Higher Modify settings introduce a smoother glissando effect.

9. Tap / Trigger Footswitch: In Classic, Through-Zero, Barber Pole Up, Barber Pole Down, Step, and Random modes, this footswitch is a tap tempo control. In Trigger Up and Trigger Down modes, this footswitch triggers the effect whenever it is pressed.

10. Presets Rotary Switch: Selects between Live mode and one of five presets. Pyramids comes with our favorites programmed in, but you're allowed to re-write them if you want. We don't mind.

11. Mode Rotary Switch: Selects between Pyramids' eight flanger modes

Tech Specs:
Flexi-Switchr Technology
This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

For best results, please use the included 9v center-negative 1-amp DC power supply.

To use with multiple output transformer-balanced isolated pedal-specific power supplies, Pyramids' may be powered from two outlets combined using a current-doubling cable. DO NOT USE A VOLTAGE-DOUBLING CABLE BECAUSE THAT WILL SEND 18V TO PYRAMIDS AND FRY IT LIKE AN OVEREASY EGG AT A GREAZY SPOON DINER.

Dimensions: 4.65 x 4.15 x 2.25 in. (118 x 105 x 57 mm) with knobs
Current Draw: 460 mA
Input Impedance: 1 MO
Output Impedance: 100 O
Read more
MRP:$451.35 SAVE 30%
 1 in stock $315.42
Earth Quaker Devices Rainbow Machine V2 Polyphonic Pitch Mesmerizer Pedal
Cat: 781717 Rel: 23 Jul 20
 
Pitch mesmerizer pedal
Notes: Welcome to the Rainbow Machine, in all its synthetic glory! This one is for experimenters, adventurists, and noisemakers. Totally not for purists and/or tone hounds. There are no natural sounds that come from this box. It takes modern DSP and uses it as a tool of future past to create real-time pitch shifting using digital oscillators.

Controls:
The Rainbow Machine has been completely re-imagineered from the pixie dust-covered ground up to be more versatile, twice as loud as the original, with an extended delay time, deeper chorus tones, silent flexiswitch footswitches on both the Activate (1) and Magic (2) functions, and most of all, more Magic.

The Rainbow Machine is built around a DSP pitch warping engine that's designed to be slightly imperfect; colored with digital remnants of the cosmic dust we've picked up across the multiverse. That is to say it's a cold digital beast made to pretend it has feelings.

The Pitch (3) control adjusts the frequency of the polyphonic pitch-warped harmony from a fourth below your input, to a third above, and every atonal pitch in-between. Noon is the unison position. Pitch may also be controlled via expression pedal. Use the Primary (4) function control to adjust the volume of the polyphonic harmony.

[Pro Tip: With the Pitch control set to noon, the Rainbow Machine acts as a chorus. Use the Primary control to adjust the wet signal volume and select the delay time with the Tracking control. The tracking improves as this control is increased, so turn it up for tighter tracking with a shorter delay time or turn it down for longer delays and more ambience.]

The Tracking (5) control adjusts the lag time between the wet and dry signals. Tone (6) rolls off some treble for a darker, vintage sound. Clockwise Tone settings are bright, counterclockwise is dark.

The Secondary (7) control adds an octave of the Primary harmony. When the Pitch control is above noon, Secondary adds an octave above the harmony. When the Pitch control is below noon, the Secondary control will add one octave below the harmony. With the Pitch set to noon, the Secondary control adds an additional chorus voice for modulated, triple-tracked tones. Use this control to blend in faux-shimmer sounds or a low-frequency rumble. It's up to you. From there, it's only a matter of how weird you wanna get.

And you can choose how weird you get with the Magic (8) control. This is a regeneration control that creates aliasing (among other things) by feeding the Primary and Secondary signals back on themselves and each other, and a bunch of other stuff no one understands.

With the Magic engaged and the control set low, you can squeeze a few extra repeats out of whatever setting you happen to be using. As you increase the Magic control, you'll start noticing increased ambience, resonant, edge-of-oscillation pitch-shifting delays, chorus, metallic digi-flanging, ascending (or descending) pixie trails, controllable self-oscillation, squalls of synthetic noise, whale song, and finally, distortion. It'll take you way beyond and open up your third eye, trust us. In conjunction with the Tracking control, the Magic creates wild pitch take offs and descends, chaos chorusing, shrieks, groans, gurgles, wizard-blessed wizardry, signal transformation, imminent destruction, and other general mayhem.

Maybe you only wanna get weird for a second? Okay, with the Rainbow Machine engaged, hold down the Magic footswitch, get weird, and then let go to return to your boring, old Magic-less guitar tone. Or, press the switch like normal, and the Magic remains engaged until you press the switch again. Ditto for the Activate switch. Press and hold to use the Rainbow Machine as a momentary effect, then let go to bypass; or feel free to press the switch like normal and use the Rainbow Machine like you would any other effects pedal.

This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.65 x 3.65 x 2.25 in. (118 x 93 x 57 mm) with knobs
Current Draw: 68 mA
Input Impedance: 1 MO
Output Impedance: <1 kO
Read more
MRP:$308.53 SAVE 28%
 4 in stock $222.29
Earth Quaker Devices Sea Machine V3 Super Chorus Pedal
Cat: 781720 Rel: 14 Jul 20
 
Chorus pedal
Notes: The Sea Machine is a chorus pedal with as many modulation possibilities as there are fish in the ocean. That's a lot of fish. And a lot of modulation. From subtle, shimmery chorus sounds, to wobbly, seasick, warbly pitch-bent detuning that rocks the boat, the Sea Machine is the audio bait that'll help you reel in the big one.

The Sea Machine ain't no one-trick seahorse. With a mix of standard and unique controls, everything from subtle warble, classic Leslie, seasick pitch bends, strangled alien sounds, stunted arpeggiations and many more far out sounds are available. Or you could just use it as a chorus. That works, too. Oh, and if you're a bass player who fancies themselves a fan of the classic 80s post-punk bass sound, the Sea Machine is pretty much just like (tone) heaven.

Controls:
1. Animate: How far the pitch shifted signal swings, lower levels equals a tighter and more focused shift a la traditional chorus. As you increase the control a more wild and animated pitch shift begins to emerge.

2. Dimension: Adds a slight slap-back at low levels, reverb-like ambiance at mid levels and an echo-resonance that will lead to self-oscillation at max.

3. Intensity: Adjusts how much modulated signal is blended in with the dry signal. Unity for this control is right around noon, everything above that is boosting the modulated signal.

4. Depth: Adjusts how strongly the LFO modulates the delay time.

5. Shape: Goes from triangle wave to square wave as you turn clockwise.

6. Rate: This sets the speed of the LFO. The miniature LED will blink to the tempo, even in bypass mode.

Tech Specs:
Flexi-Switchr Technology
This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Power
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 40 mA
Input Impedance: 10 kO
Output Impedance: <1 kO
Read more
MRP:$268.11 SAVE 27%
 2 in stock $194.54
Earth Quaker Devices Space Spiral V2 Modulated Delay Device Pedal
Cat: 781722 Rel: 28 Jul 20
 
Delay pedal
Notes: The Space Spiral is a dark and dreamy modulated delay designed to take you across the highways of fantasy. While the delay may be designed around a "dawn of digital" echo processor, the sound is out of this world, man. If you are a fan of the dreary echoes produced by old oil can delays or the ethereal sound of a well-loved tape delay, the Space Spiral is totally going to tickle your tone bone.

The Space Spiral's delay time ranges from a tight 30ms to a fast and loose 600ms. Can you imagine having 600ms of delay time at your fingertips? Out of this world! With all of this adjustable delay time you create anything from a classic slapback to a rhythmic wash of cosmic proportions. You want to take it even further? Maybe to an astral plane? Crank up the repeats and let the infinite oscillation of the Space Spiral take you to the other side.

Space Spiral- It'll get you through the night.

Controls:
1. Time: Delay time goes from 30ms to 600ms; Clockwise for long and counterclockwise for short.

2. Repeats: Controls the regeneration of the delay signal. Repeats increase clockwise and gradually begin to build into self-oscillation around 3 o'clock. This oscillation will infinitely continue until the Repeats control is brought back down below the 3 o'clock threshold. These oscillations will last even when the pedal is in bypass mode.

3. Mix: Blends the delay signal in with the dry; Clockwise for more and counterclockwise for less.

4. Depth: Controls the desired amount of modulation; Clockwise for more and counterclockwise for less.

5. Shape: Morphs the wave shape from a soothing triangle shape to a choppy square shape as you turn clockwise.

6. Rate: Controls the speed of the modulation; Clockwise for fast and counterclockwise for short.

Tech Specs:
Flexi-Switchr Technology
This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Power
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 38 mA
Input Impedance: 1 MO
Output Impedance: <1 kO
Read more
MRP:$268.11 SAVE 22%
 1 in stock $209.95
Earth Quaker Devices Spatial Delivery V2  Envelope Filter With Sample & Hold Pedal
Cat: 781724 Rel: 28 Jul 20
 
Envelope filter pedal with sample & hold module
Notes: The Spatial Delivery is an oddball, a voltage controlled envelope filter that allows you to step outside the universe of funk while reinforcing your secret love affair with auto-wah. It has 3 modes: Up Sweep, Down Sweep and Sample and Hold.

With Range, Resonance and Filter controls you can get super emphasized filter sweeps in the Up and Down modes. The Range, in combination with pick attack, controls the sensitivity and reaction time of the envelope and thus the width of the frequency sweep. The higher the Range and harder the attack equals a faster reaction time and higher frequency sweep and vice versa. Reign in the controls a bit, add your favorite overdrive/fuzz after the Spatial Delivery and you've got a real nice resonant, cut-through-the-mix lead tone. Crank the controls back up and you're a neo-bedroom rock god. In the Sample and Hold mode the filter is controlled by random voltage and the Range controls the speed. Add a sub octave into the mix (before or after) and you've just created a deep fried space droid computer freak-out. The filter can be cross faded between high pass (counterclockwise), band pass (center) and low pass (clockwise) for a wide variety of voices. The Resonance control goes from zero to the brink of oscillation and adds more body and ring to the filter voice.

Controls:
1. Range: Adjusts the sensitivity of the envelope in Up and Down mode. In Sample and Hold mode, this controls the speed.

2. Mode Toggle: This toggles between Upward Sweep, Downward Sweep or Sample and Hold.

3. Resonance: This is the filter feedback control, it adds more body and ring to the filter voice.

4. Filter: This crossfades between high pass and low pass filters and allows you to get everything in between. High pass is fully counterclockwise, low pass is full clockwise and center is band pass. This is much more useful than a simple switch because it allows you to blend the filters for different sounds!

Suggested Placement
We recommend placing the Spatial Delivery first in your signal chain. However, due to its envelope control, experimenting with pairing and signal chain placement can take the potential of the Spatial Delivery even further.

Tech Specs:
Flexi-Switchr Technology
This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Power
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 68 mA
Input Impedance: 500 kO
Output Impedance: <1 kO
Read more
MRP:$276.20 SAVE 20%
 2 in stock $221.17
Click for better price!
or call +44 20 7424 1960
quote 781724
Earth Quaker Devices Swiss Things Pedalboard Reconciler Pedal
Cat: 781741 Rel: 14 Jul 20
 
Pedalbord reconciiler pedal
Notes: Swiss Things combines two true-bypass Flexi-Switchr enabled effects loops, a Flexi-Switchr AB-Y box with transformer isolation between outputs, a buffered tuner output, 20dB of clean boost with adjustable gain, an expression pedal output for volume control and a quiet, high headroom output buffer into a compact pedalboard-friendly signal routing junction box that lives at the top-right corner of your pedalboard and really ties your rig together without any signal loss.

This is what you can do with it:

Use as many pedals as you'd like without tone-suck

Quickly and easily bypass or engage all of your effects with one click

Use Flexi-Switchr Technology with every pedal in your setup

Eliminate volume pedal tone-suck by using any expression pedal to control volume

Use multiple amps without phase issues, ground loops, or extra noise

Tidy up your rig, shorten cable runs, and reduce tone loss by keeping all inputs and outputs in one location

Controls:

Here's what the footswitches do:
1. Loop 1: Press this to engage Loop 1. It features Flexi-Switchr Technology and is unbuffered for use with all distortion, overdrive, and fuzz pedals, or anything else that doesn't like being buffered.

2. Loop 2: Press this to engage Loop 2. It also features Flexi-Switchr Technology and is buffered for use with time-based effects (delay, reverb, modulation, etc.).

Note: when nothing is plugged into Loop 2, it functions as a mute.

3. Boost: press this to activate the boost. It is Flexi-Switchr Technology enabled and provides up to 20dB of clean boost post-effects loops and is intended for use as an output booster.

4. A/B: selects between Output A and Output B.

Note: Output B is transformer-isolated and includes a Phase switch for use with pedals and/or amplifiers which invert phase.

5. Both: activates Output A and Output B at the same time and features Flexi-Switchr Technology

Here's what the input, output, send, return, and expression jacks are for:
6. Input: plug your instrument in here.

Note: If you have any "always-on" pedals (compressors, preamps, EQs, etc.) place them before Swiss Things' input.

7. Loop 1 Send: Plug this into the input of the first pedal in the octave/overdrive/distortion/fuzz section of your board.

8. Loop 1 Return: Plug the output of the last pedal of the octave/overdrive/distortion/fuzz section into this jack.

9. Loop 2 Send: Plug this into the input of the first pedal in the modulation section of your board.

10. Loop 2 Return: Plug the output of the last pedal of your modulation section into this jack.

11. Tuner Output: Connect this to the input of your tuner.

Note: Tuner must be always turned on. If you bypass your tuner, you may experience ground loops or hum.

12. Volume EXP: Connect any expression pedal to this output to control volume.

Note: Most volume pedals create "tone-suck" by loading the signal down and have limited travel. This solves that problem with a buffered output and allows you to use any expression pedal with the same results. The expression jack is placed after the "dirt" effects loop (Loop 1) which allows you to change volume levels without affecting gain.

13. Output A: connect this to the input of your amplifier.

14. Output B: connect this to the input of a separate amplifier to use multiple amps and/or to play in stereo.

Note: To use Swiss Things with stereo effects, they should be placed after Outputs A & B and both outputs must be selected using the Both switch.

Note: Output B is transformer-isolated and includes a Phase switch for use with pedals and/or amplifiers which invert phase.

Note: To use stereo effects after Swiss Things, do not have the Phase switch engaged otherwise the L & R inputs of your stereo effects will be out of phase.

Tech Specs:
Flexi-Switchr Technology
This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Power
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedals will make extra noise if there is ripple or unclean power. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 5.65 x 2.25 in. (121 x 144 x 57 mm) with knobs
Current Draw: 40 mA
Input Impedance: 1 MO
Read more
MRP:$335.48 SAVE 21%
 1 in stock $266.08
Earth Quaker Devices The Depths V2 Analog Optical Vibe Machine Pedal
Cat: 781628 Rel: 28 Jul 20
 
Optical vibe machine pedal
Notes: The Depths is Earth Quaker Devices' take on the classic optical vibe circuit. Now you can swab the decks with the same lush, pulsating, three-dimensional swirling sound you know and love, with some modern accouterments for all you land-lubbers out there.

The Depths is optimized for use with all kinds of instruments, pickups, and to play well with dirt, so nobody's left waiting on shore. If it's got a 1/4" output, plug it in and get deep!

Controls:
1. Intensity: This controls how subtle or intense the overall effect is. Counterclockwise from noon are the more subtle, classic sounds. Clockwise from noon are the more drastic and intense sounds.

2. Voice: Dials in the overall sound. Turn it clockwise for a fuller sound with more lows, bring it back for a thinner, more midrange focused tone.

3. Rate: Controls the speed of the effect. Counterclockwise for slow, clockwise for fast.

4. Level: Controls the volume of the effect. Unity is around 1 o'clock, everything above that is boost.

5. Throb: This controls the low end pulse. It may not be immediately evident on the bridge pickup, but switch to the neck or add some dirt and it comes alive. All the way up for more throb, dial it back for less. Works best when the Voice is set to a warmer tone.

Tech Specs:
Flexi-Switchr Technology
This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Power
This device takes a standard 9-18 volt DC power supply with a 2.1mm negative center barrel. Pedals will make extra noise if there is ripple or unclean power. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 21 mA
Input Impedance: 1 MO
Output Impedance: <1 kO
Read more
MRP:$268.11 SAVE 20%
 1 in stock $213.32
Click for better price!
or call +44 20 7424 1960
quote 781628
Earth Quaker Devices The Warden V2 Optical Compressor Pedal
Cat: 781755 Rel: 28 Jul 20
 
Comrpessor pedal
Notes: Hey boss, thanks for taking a visit from The Warden! The Warden is an optical compressor with a feature set usually reserved for studio grade units. Built with high grade components and internally powered by 18v, The Warden has loads of gain and sustain on tap. With complete control over attack, release, sustain and ratio, The Warden will allow everything from a heavy squash with fast attack and release to "barely there" subtle compression. Optical compression has a reputation for having more character than a VCA or FET-based compression and The Warden is no exception.

Controls:
1. Tone: This pedal was designed to slightly color your tone, and the coloration can be dialed-in to your taste. Counterclockwise is treble cut, clockwise is treble boost. The tone is nearly flat around 11 o'clock.

2. Attack: This controls how quickly the compressor reacts and starts leveling the signal. All the way counterclockwise is a fast, nearly immediate reaction. Turning the attack clockwise slows the reaction time.

3. Release: This controls how long it takes the signal to raise back up to the level determined by the Sustain and Ratio settings. All the way counterclockwise is a fast release and the release time slows as you turn it clockwise.

4. Level: This controls the overall output and is affected by the Sustain and Ratio settings. There is no specific unity setting; adjust to taste when you find your perfect compression setting.

5. Ratio: This determines how much the gain reduction affects the signal. All the way up is full compression and the compression is reduced as you turn this counterclockwise which allows more of the boosted, less-compressed signal to come through. There are no defined ratios here.

6. Sustain: This is the heart of The Warden. It controls how hot the signal is, which changes the dynamics of the compression. The Warden is a feedback-style compressor; the hotter the signal, the more active the compression. Very little Sustain= very little compression, less active Attack and Release and a cooler signal. Max Sustain= heavy compression, longer sustain, hotter signal and more lively Attack and Release.

Tech Specs:
Switching
This device is true bypass and uses electronic relay-based switching. Audio will not pass without power.

Power
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 31 mA
Input Impedance: 1 MO
Output Impedance: <1 kO
Read more
MRP:$268.11 SAVE 21%
 1 in stock $212.20
Earth Quaker Devices Tone Job V2 EQ & Boost Pedal
Cat: 781748 Rel: 14 Jul 20
 
EQ & boost pedal
Notes: This compact Boost & EQ device is based around the tone-shaping options available in old audiophile-grade stereo preamps, making it a great addition to your pedalboard, no matter what instrument you play.

So what does that mean, exactly? It means that you'll hear full frequency response from your Tone Job everywhere you plug it in - guitar, bass, drum machine, synthesizers, steel drums, harpsichord, kazoo, car stereo, or wherever!

The Tone Job has active EQ controls for Bass, Mid and Treble, with up to 20 dB of cut or boost, which is handy for pairing up with other pedals in your chain to breathe new life into old dirt. Unlike boring old graphic EQs, the Tone Job's EQ controls are interactive, so you can experiment with different settings to alter the response and overall feel of the device, getting your tone out of the lunchroom and back on the clock.

Place the Tone Job at the beginning of your chain to alter the overall character of your guitar, or use it at the end to boost output at the end of a long cable run and fine-tune your tone. The Level control on the Tone Job can boost your signal up to 5x the original input level, so you'll always be heard, and makes for a fantastic solo and/or clean boost!

Controls:
1. Level: Post EQ volume control. Can boost the signal up to 5x the input. Unity is around 10 o'clock.

2. Treble: The center position is flat and marked with a center detent in the potentiometer. All settings above this point boost the treble and all settings below cut treble.

3. Bass: The center position is flat and marked with a center detent in the potentiometer. All settings above this point boost the bass and all settings below cut bass.

4. Middle: The center position is flat and marked with a center detent in the potentiometer. All settings above this point boost the middle and all settings below cut middle.

Tech Specs:
Switching
This device is true bypass and uses electronic relay-based switching. Audio will not pass without power.

Power
This device takes a standard 9-18 volt DC power supply with a 2.1mm negative center barrel. Pedals will make extra noise if there is ripple or unclean power. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 21 mA
Input Impedance: 1 MO
Output Impedance: <1 kO
Read more
MRP:$222.30 SAVE 21%
 2 in stock $176.27
Earth Quaker Devices Westwood Translucent Drive Manipulator Pedal
Cat: 781758 Rel: 14 Jul 20
 
Overdrive manipulator pedal
Notes: Westwood is a touch sensitive translucent overdrive manipulator as clean and pure as the breeze which blows through a grove of Douglas Fir trees, and as hot as a damn fine cup of coffee.

This mild-mannered light to medium-gain overdrive with active EQ controls will still knock the socks right off your trusty low-wattage combo amp, pushing it into anything from cutting, edge-of-breakup rhythm tones, all the way to articulate, singing lead tones stacked high with pleasing even-order harmonics and sweet, sweet sustain. And if you pair it up with your favorite head and cab, you should probably call the neighbors first, because the Westwood's Level control has enough output on tap to alert the proper authorities. Even the FBI.

Each and every Westwood is a real Blue Rose case, hand built by a team of special agents in the Black Lodge of Akron, Ohio, USA, where the owls are not what they seem, there's always music in the air, and the birds sing a pretty song.

Controls:
1. Level: Adjusts Westwood's output level. Clockwise is loud, counterclockwise is quiet.

2. Drive: Adjusts the amount of overdrive. Clockwise is dirty, counterclockwise is clean.

3. Bass: Selects amount of low frequencies around 80Hz. Clockwise to boost, counterclockwise to cut.

4. Treble: Selects amount of high frequencies around 2kHz. Clockwise to boost, counterclockwise to cut.

Tech Specs:
Switching
This device is true bypass and uses electronic relay based switching. Audio will not pass without power.

Power
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw 18 mA
Input Impedance 1 MO
Output Impedance <1 kO
Read more
MRP:$241.17 SAVE 20%
 1 in stock $193.11
Click for better price!
or call +44 20 7424 1960
quote 781758
EBS Acoustic Preamp Stanley Clarke Signature Effects Pedal
EBS
Cat: 798772 Rel: 13 Nov 20
 
Acoustic preamp effects pedal
Notes: The Stanley Clarke Signature Acoustic Preamp is a 2-channel preamp, built exclusively with premium components. It is engineered and designed by EBS together with the legendary bass player and composer Stanley Clarke.

Since the preamp operates at a signal level equal to professional mixing consoles it provides a huge amount of headroom. The superior signal quality makes it suitable to use as a preamp in combination with any power amp. The headroom and specific features make it ideal for handling the complex sonic characteristics of an upright bass.

The A and B channels both feature an input GAIN control and an EQ strip with BASS, MIDS (pick the frequency range with one knob and cut or boost in that range with another) and TREBLE. They both also have a secret weapon, a control knob that can be used either as a HIGH PASS or NOTCH filter. A switch decides the function, while the control knob picks the frequency range. The notch and high pass filters are excellent tools to prevent unwanted feedback and adjust the sound to the characteristics of the room and your instrument.

With 10 Mohms input impedance for both the A and B channels, it handles any instrument with passive, active, or high impedance piezo pickups. The A channel also provides support for Electret pickups when activating a dedicated switch. The B channel allows you to use a 48V Phantom powered (or passive) dynamic or condenser microphone as the source via an XLR-input. Choose whether to use the XLR or 1/4"-input for the B channel with a switch.

The preamp lets you jump between the A and B channels to allow for different settings when you play with a bow or pizzicato or mix the two if you use two different input sources.

Blending two different sound input sources can sometimes cause a phase issue. If that occurs, a Phase Inverter switch, attached to the A channel, will solve the problem.

Hook up additional effects in serial or parallel through the EFFECTS LOOP (requires a Y-split insert cable). A TUNER OUT lets you plug in an external tuner. A BALANCED XLR-OUTPUT sends a studio-quality line signal to front-of-house or a recording device. Use it in conjunction with a Speaker Simulator and use the Ground Lift to prevent hum. The Aux Input and professional-grade Headphones output makes practicing and learning new songs easy.

Can this pedal be used with other instruments?

Yes, of course. The frequency range of an upright bass is wide and complex, which means most other instruments - acoustic or electric - fits within the range that this pedal covers. Other acoustic instruments benefit from the same specific features that this pedal is equipped with to handle the upright bass. Electric bass players may find the two similar channels an excellent way to make individual EQ settings for two different instruments and make it possible to switch between the two smoothly at a gig.

Input Impedance: 10 Mohms // 22 pF
Gain: Gain Range -oo/+30 dB Gain Peak LED (ch A = RED, B = yellow) +10 dBv Frequency Response +0/-3 dB 20-20.000 Hz
Bass Filter: Type Shelving Gain Range +/- 15 dB @ 40 Hz
Mid Filter: Type Bandpass Filter Gain Range +/- 13 dB Frequency Range 70 - 2500 Hz Q 0.8
Treble Filter: Type Shelving Gain Range +/- 15 dB @ 10 kHz
HP Filter: Type 12 dB/octave High Pass Frequency Range 20(off) - 450 Hz
Notch Filter: Type Bandpass Notch Frequency Range 70 - 2200 Hz Q 7 Attenuation 7 dB (typically)
Electret Power (Channel A): 5V, 2mA

Common Features:
Effects Loop:
Loop Signal Level -10 dBv (nominal)
Gain Unity (1:1)
Output Impedance 2 kohms
Input Impedance 100 kohms
Modes Serial or Parallel

Phones Out: Recommended Imp. 32 - 200 ohms
Aux Input: Input Impedance 20 kohms
Nominal Level -10 dBv
Output: Output Impedance 1 kohms
Signal Level 0 dBv (nominal)
Balanced Output: Output Level -20dBv (nominal)

XLR Connections 1-GND, 2-Hot, 3-Cold Options
Gnd Lift, SPKR Sim
Balanced Input (Channel B): Input Level -30dBv (nominal)
XLR Connections 1-GND, 2-Hot, 3-Cold
48V Phantom Yes
Auxiliary Info: Power Requirements Idle 500mA @9V
max 800mA @9V (with headphones at max output level)

Dimensions (WxDxH): max 168 x 124 x 53 mm / 6.6" x 4.9" x 2.1"
Weight: 660 g (1.5 lbs.)
Read more
 1 in stock $335.69
Click for better price!
or call +44 20 7424 1960
quote 798772
EBS Black Haze Distortion & Overdrive Pedal
EBS
Cat: 639060 Rel: 09 Feb 17
 
Analog overdrive/distortion pedal for guitar & bass
Notes: The Black Haze is an overdrive pedal in the new 'blue label' pedals series, developed for guitar and suitable for bass.

The Black Haze is developed by EBS with input from several Swedish top session guitarists. It is a beautiful drive with some darkness to it to make it interesting and irresistible. The Black Haze features dual drive engines and low-range compensation.

Full control. The pedal feature controls for Drive, Tone and Volume and a switch for Thin, Normal or Deep character.

Brand new design. A new compact housing design include recessed jacks to reduce space between pedals on a pedal board and a comfortable angle that makes switching smoother.

Can I use it with bass? The Black Haze offers a rich and creamy drive sound for your bass with solid bottom-end. Use the Drive, Tone and Volume controls to tweak your sound, and pick your favourite character between Thin, Normal and Deep, where Deep makes it interesting and dark while Thin and Normal makes it stand out more. It adds a new flavour of distortion to EBS existing product portfolio of bass effects.
Read more
 1 in stock $83.07
Click for better price!
or call +44 20 7424 1960
quote 639060
EBS Microbass 2 Preamp Pedal
EBS
Cat: 623416 Rel: 23 Aug 16
 
Professional analog signal processing tool with DI box, 2 channel preamp, speaker simulation and effects loop
Notes: The EBS Microbass 2 preamp is the bass players 'Swiss Army Knife'.
A DI box, two-channel preamp, with speaker simulation, effects loop, phones output and loads of other great features. This is the ultimate bass tool. Period!

Two Channels and A Useful Loop. The MicroBass II can be used as an active direct box, a one or two channel preamp, instrument switcher or blender.

The two channels provide sound shaping from high end solid-state types to distorted timbres, using the awarded tube emulation circuitry found in the EBS range of professional bass heads.

An incorporated effects loop gives the user added flexibility for connecting to other effect pedals, or for mixing in an external audio source such as a CD player for rehearsal purposes.

Unmatched Flexibility - The balanced output with speaker simulator option provides unmatched flexibility in live and studio situations. Footswitches control mute and channel operation/switching. Other features include headphone output, low battery indicator, link and master outputs, bass, 'sweepable' midrange, treble, bright and edge filters, drive and effects mix controls.

The EBS MicroBassII delivers that big, burning EBS sound wherever you go.
Read more
 2 in stock $184.12
Click for better price!
or call +44 20 7424 1960
quote 623416
EBS MicroBass 3 Preamp Pedal
EBS MicroBass 3 Preamp Pedal (preamp pedal/DI box)
EBS
Cat: 718777 Rel: 24 Jun 19
 
Professional analogue bass preamp/DI box
Notes: The EBS Microbass 3. We've all been there. Being forced by circumstances to rely on someone else's gear and left with that uneasy feeling it could turn into a disaster. With the new EBS Microbass 3, you can let go of that feeling and be confident you'll have your sound no matter the situation.

The EBS MicroBass 3 is a 2-channel preamp, built exclusively with premium components. It is engineered by EBS in Sweden with technologies from the famous HD360 and Fafner II amplifier designs. The preamp operates at a signal level equal to a professional mixing console (+/- 15V) which gives you plenty of headroom. The high signal level makes it suitable to use as a preamp in combination with any type of power amp.

Run the Clean and Drive channels in series or parallel. Use the dual balanced XLR-outputs to tap the signal post and pre EQ at the same time. If you run the Effects loop in stereo mode, the balanced outputs become a Left and Right output instead. With 10 Mohms input impedance, it handles any type of bass - passive, active or with piezo pickups.

The built-in tuner makes it easy to tune between songs without the need of an external device. The MicroBass 3 also carries an onboard compressor, similar to the one found on several EBS amplifiers, and several more features.

The analog EBS MicroBass 3 ensures your sound - every time.
Read more
 1 in stock $336.81
Click for better price!
or call +44 20 7424 1960
quote 718777
EBS OctaBass Blue Label Triple Mode Analogue Octave Divider Pedal
EBS
Cat: 751988 Rel: 24 Oct 19
 
OctaBass pedal - Blue Label edition
Notes: The new EBS Octabass Blue Label pushes the boundaries for what has seen as possible with an analogue octave effect. The quality and character of the octave tone, as well as the precision and speed of the tracking, is outstanding.

The EBS OctaBass was the first effect unit ever made by EBS. It is famous for fast and accurate tracking and a fat, natural sound. When you play your instrument, it "tracks" the note you play and produce a sound one octave below to mix in with the note you play. The 'Blue Label' model has a couple of new features that enhance the tracking range and improves the control of the sound.

Improve the tracking where it matters the most:

A new Range-switch makes possible to move the optimized focus area of the tracking to either higher up or lower down the fretboard. All to match your playing style and needs. This feature makes the tracking speed and range outstanding for an analogue octave pedal. Note: Don't confuse this switch with the Range-switch on previous OctaBass pedals where it changed the character of the tone.

Enhanced tone control:

By adding a seamless tone control you can go from a present, focused octave sound that cuts through the mix all the way to a sub-bass backdrop of lows that discreetly supports the note you play. The tone control enhances the palette of sounds and also makes it easier to achieve a synthesized bass sound.

Power the Blue Label OctaBass with 9-18V DC power. The footprint is reduced by 12% compared to the previous Studio and Black Label editions.
Read more
 1 in stock $177.39
Click for better price!
or call +44 20 7424 1960
quote 751988
Artikel 1 bis 50 von 382 auf Seite 1 von 8 anzeigen
1  2  3  4  5  6  7  8  »

Filter

Effects pedals
DJ-Ausrüstung
Release Date
Close