100% Sicheres Einkaufen

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Sicheres Einkaufen

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Effects units

View:
Options
Artikel 1 bis 4 von 4 auf Seite 1 von 1 anzeigen
Subscribe to our weekly Studio Equipment emails
Cat: 690929 Rel: 15 Jun 18
 
Multi-purpose analogue effects unit featuring dual BBD chips
Notes: Erica Synths Fusionbox is a distinct multifunctional analogue effects unit that combines BBD chip-based effects - delay, flanger, chorus - with tube overdrive in the delay output and feedback path for extra thickness of sound.

Fusion Box lowpass filtering is fully adjustable from none to extreme for a really deep bass sound. A special feature, not found in other contemporary stompboxes or effect units, is the Vintage Stereo Ensemble.

The Vintage Stereo Ensemble provides the classic "stereo ensemble" effect, found on many vintage synthesizers from almost any brand and make. In stereo ensemble effect, the delayed, processed and filtered sound is added back to the dry (mono) audio with inverted phase for one channel, and direct phase in the other. This gives it the distinct and unique moving character, different from that obtained with chorus effects. However, use of inverted phase in stereo field also adds certain peculiarities to watch out for. For example, when such stereo audio is played back on an older "surround" decoding sound system, ensemble effect sound may move to the rear sound channel. Also, if the output gets mixed back to mono, the effect may disappear. This also applies to mono subwoofer systems, or speakers that are placed too close. This is normal, and occurs with any similar vintage stereo ensemble processing. In this case and if such oddities are undesirable, to avoid mono mixing issues, you can choose to use only one of the output channels, or use two separate ensemble processors for left and right channels.

Fusionbox has adjustable input gain, therefore it works with various sound sources - guitars, units with line level signals (synthesizers, grooveboxes, etc.) and modular synths. Footswitch allows to switch on or bypass effects making Fusionbox ideal for guitar players.
Read more
 1 in stock $427.86
Cat: 742655 Rel: 04 Dec 14
 
B-STOCK: Box damaged, product unused & in perfect condition
Notes: ***B-STOCK: Box damaged, product unused & in perfect condition***


*** NO POWER SUPPLY INCLUDED - USES GENERIC 12VAC ADAPTER ***

Basically, the Ekdahl Moisturizer is a spring reverb where the springs are exposed so they can be played/hit/fiddled with. As well as being capable of creating sound in itself, you can of course also play sound through the springs like a regular spring reverb - this makes for happy-fun-time finger-modulation of the reverb on whatever audio that's going through it. On top of this there's an analog multimode filter that can be used to attenuate or exaggerate certain frequencies in the sound, this is real handy while playing the springs as you can - for instance - cut all the highs and just make thunderous doomy sounds or do the opposite; cut all the lows and make that ear piercing high frequency special love. Also, it incorporates an LFO that's internally routable to the filter and that also has some external routing-stuff. The Ekdahl Moisturizer has tons of CV / Expression pedal options on the back for even more hillarious moments. The Moisturizer is a mono unit.

The Moisturizer was developed with the help of Jason Willett (Half Japanese, Leperchaun Catering), Martin Schmidt (Matmos, Instant Coffee), Joshua Atkins (Polygons, Major Powers), mom & dad and many more.

The Ekdahl Moisturizer contains exactly:
Preamp (up to 10 times gain)
Reverb
Reverb / Preamp wet/dry crossfader (Knob & CV/EP controllable)
State variable filter with
Lowpass/Bandpass/Highpass seamless crossover (Knob, CV/EP & LFO controllable)
Cutoff (Knob, CV/EP & LFO controllable)
Resonance (WITHOUT resonance limiter)
LFO with
Speed control (Knob & CV/EP controllable)
Square / Triangle crossover
External output with output amplitude knob
Filter / No filter wet/dry crossfader (Knob & CV/EP controllable)

The preamp section is designed for a max of 10 times gain, this to accomodate for low level output instruments such as guitars etc. The reverb tank has normal reverb signal gain on it, meaning that if you hit the springs hard they'll distort like crap which is real nice, if you hit them softly the sound won't be distorted.

The filter in the Ekdahl Moisturizer is abrasive, the fact that it doesn't have any resonance limiting makes it possible to get the filter to sound *really* bubbly & metallic (way more then any filter i've ever heard), but it's also of course capable of sounding completely "normal" - it all depends on the amount of resonance and/or gain. The fact that you can seamlessly fade inbetween lowpass, bandpass or highpass filter (or lowpass+bandpass and highpass+bandpass) makes the unit pretty damn versatile and by using the wet/dry filter/no filter crossfader there's some neat shit that can be done too. Now it should be said that due to the fact that there's no resonance limiter, if using very high gain, with high resonance and turning the cutoff frequency very high the filter might cut out - not to worry, just turn the cutoff back a bit and the filter pops in again. This happens because the filter gets overloaded and can be avoided with a resonance limiter, however if i had one of those all the super-awesome bounce would be gone and it'd sound like all the other filter out there.

The Ekdahl moisturizer has six CV/Expression pedal related jacks on the back, one of them is a LFO output so you can control other shit with The Moisturizer's LFO. All the other jacks are inputs and takes either CV or Expression pedal, they are: Reverb Mixture, VCF Cutoff, VCF Filter Mode (LP/BP/HP), Filter Mixture and LFO Speed.
Read more
 1 in stock $477.29
FORTHCOMING
TouellSkouarn Ar Merc'het Brao Dual Filter & Overdrive Desktop Effects Unit
coming soon $379.73
Cat: 433131 Rel: 19 Aug 11
 
Desktop spring reverb
Notes: Today's digital effects and plug-ins can create almost perfect room simulations. However, when it comes to characteristic and charismatic reverb, analogue effect-processors are yet to beat. The reverberating sound of a spring is so lively and unique that its sound is almost impossible to recreate in the digital domain. In addition to this, Retroverb Lancet is not just a spring reverberation system - it is an analogue multi-effects-processor. It offers overdrive, filtering, VCA, envelope and LFO to manipulate the spring sound and create different sounds like auto-wah, tremolo, distortion, delay, gater and of course reverb.

The typical spring reverb sound is generated by a Belton/Accutronics type 4 spring tank with 3 individual springs. It can be placed pre or post the VCF/VCA section and equalized by the Tone parameter.

The Crash function generates the popular thunder effect that occurs when kicking an amplifier with spring tank. You don't have to kick Retroverb Lancet you simply can achieve this effect by pressing the Crash button. It also can be triggered by a Gate voltage.

The multimode filter works as lowpass or highpass with a slope of 24 dB per octave or as bandpass with 12 dB per octave. It is followed by a voltage controlled amplifier. The filter and amplifier can be modulated individually by different sources.

The Retroverb Lancet offers 3 internal modulation sources:

Envelope follower: the envelope follower converts the amplitude characteristic of the audio input signal into a control voltage.
Envelope generator: the envelope generator can be triggered by the input signal itself, a second audio signal or a gate voltage. Depending on the trigger source it works as Attack-Decay or as Attack-Sustain-Release envelope.
LFO: the LFO offers saw up and saw down, square, sine as well as sample&hold. Additionally it can use the envelope generators settings as waveform. It can oscillate freely or reset by different trigger sources.

The Retroverb Lancet also offers a CV/Pedal input which can be feed by external control voltages or can be used with expression pedals.
Read more
 2 in stock $426.80
Click for better price!
quote 433131
Artikel 1 bis 4 von 4 auf Seite 1 von 1 anzeigen

Filter

Effects units
DJ-Ausrüstung
Release Date
Close