100% Sicheres Einkaufen

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Sicheres Einkaufen

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

DI boxes

View:
Options
Artikel 1 bis 9 von 9 auf Seite 1 von 1 anzeigen
Cat: 450014 Rel: 12 Mar 12
 
2 x passive interfaces let you connect instrument, line or speaker level signals to a mixer or other balanced inputs
Notes: The DUALZDirect provides 2 x independent high quality totally passive interfaces that let you connect instrument, line, or speaker level signals to a mixer or other balanced inputs through high performance audio isolation transformers. Each of the high impedance single-ended 1/4" inputs is converted by a transformer into an isolated, balanced, low impedance signal output. The DUALZDirect's audio transformers have an extremely flat and wide frequency response and can handle high signal levels. This gives the DUALZDirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments.

The input attenuator switches allow for a wide range of signal levels and the input Thru jacks allows for tapping off of your signal chain. The ground lift switches let you totally separate the input and output signal grounds, when appropriate, to isolate 2 x systems, thereby reducing hum and ground-loop noise.

What further sets the DUALZDirect apart from other DI boxes are its extended features and versatility. Art have added switchable low pass filters that cut out all very high frequency interference. These Bessel filters on the outputs are placed out of the audio range and are primarily intended to reduce radio frequency interference before it gets into the main system. The filters are also very effective in reducing any digital computer noise artifacts when using the DUALZDirect as an interface between a computer-based audio workstation and your monitors. The pase invert switches, while not normally included with your run of the mill DI box, have been added to allow you to switch signal polarity right at the source. This feature is especially handy when you are combining a direct tap with a microphone feed in the mix.

The compact black-anodized all aluminum case and it's passive design allow the DUALZDirect to provide years of trouble free service in live sound, permanent/fixed Install, DJ, and virtually any PA application. It's full feature set, rugged construction, and high-end specifications make the DUALZDirect the obvious choice.
Read more
 1 in stock $40.27
Cat: 455715 Rel: 11 May 12
 
Passive interface lets you connect instrument, line, or speaker level signals to a mixer or other balanced input thru an audio isolation transformer
Notes: The Zdirect is a high quality totally passive interface that lets you connect instrument, line, or speaker level signals to a mixer or other balanced input thru a high performance audio isolation transformer. The high impedance single-ended 1/4" input is converted by the transformer into an isolated balanced low impedance signal source. The Zdirect's audio transformer has an extremely flat and wide frequency response and can handle high signal levels while still maintaining an isolated balanced low impedance output. This gives the Zdirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments.

The input attenuator switches allow for a wide range of signal levels and the input thru jack allows for tapping off of your signal chain. The ground lift switch lets you totally separate the input and output signal grounds, when appropriate, to isolate 2 systems, thereby reducing hum and ground-loop noise.

What further sets the Zdirect apart from other DI boxes are its extended features and versatility. ART have added a switchable low pass filter that cuts out all very high frequency interference. This Bessel filter on the output is placed out of the audio range and is primarily intended to reduce radio frequency interference before it gets into the main system. The filter is also very effective in reducing any digital computer noise artifacts when using the Zdirect as an interface between a computer-based audio workstation and your monitors. The phase invert switch, while not normally included with your run of the mill DI box, has been added to allow you to switch signal polarity right at the source. This feature is especially handy when you are combining a direct tap with a microphone feed in the mix.

The compact black anodized all aluminum case and it's passive design allow the Zdirect to provide years of trouble free service in Live Sound, Permanent/Fixed Install, DJ, and virtually any PA application. It's full feature set, rugged construction, and high-end specifications make the Zdirect the obvious choice.
Read more
 2 in stock $32.60
Cat: 493501 Rel: 14 Jun 13
 
Active DI box powered by batter or phantom power
Notes: With the DI100, you can rest assured that your sound source will reach the console balanced and noise free. Behringer's take on the all important active DI box gives you functionality, durability and incredible sound at a remarkable price.

Plug into the DI100's balanced 1/4" TRS or XLR input, then send a signal to your console via the balanced XLR output. You can even plug your guitar or bass amp's speaker output into the DI100, which can handle ratings of up to 3,000 Watts and still deliver a perfect signal. It also features a 1/4" link jack to send your signal to an on stage amplifier.

The DI100 also has a switchable attenuation pad, allowing input levels of up to +50dB. There is also a ground lift switch to eliminate noise associated with ground loops. The DI100 also features Behringer's renowned OT-1 output transformer.
Read more
 7 in stock $28.36
Cat: 493504 Rel: 25 Aug 16
 
Passive DI box with impedance and signal matching
Notes: The Behringer Ultra DI DI400P is a passive DI (Direct Injection) box for connecting a guitar, bass or keyboard directly to your mixer. With the DI400P as your go between, impedance matching problems become a thing of the past, and long cable runs will not sacrifice all of your precious tone.

With its parallel 1/4" in and out jacks, the DI400P allows you to plug in your instrument and send the same signal to your onstage amplifier, while the XLR Output sends a balanced signal to your mixer. A ground lift switch eliminates hum associated with ground loops and our high performance transformer provides the ultimate in signal integrity.

The Ultra DI DI400P is compact and we house it in a tough, road ready metal case. This means the DI box will give you great sound gig after gig, session after session. And thanks to its low price, you can afford to outfit the entire band!
Read more
 More than 10 in stock $22.71
Cat: 607860 Rel: 13 Apr 16
 
Passive DI box with built-in niose filter & attenuation switch
Notes: Passive Direct Injection box with noise filter to reduce RF interference, pad switch (attenuator) and ground lift option. Professional solution for connecting musical instruments directly to a mixing console.
Read more
 2 in stock $22.89
Cat: 677264 Rel: 29 Jun 18
 
Passive DI box - ideal for mono sound sources such as guitar & bass, plus many more stage & studio applications
Notes: From acoustic guitars to laptops, always sound your best with MDB Series Direct Boxes. Available in four different models, the MDB Series will give you the peace of mind that your sound will faithfully get to your audience the way that you hear it on stage.

An essential tool for every musician and engineer, the MDB-1P Passive DI has everything you need to adapt unbalanced, high-impedance audio to a balanced, low-impedance output with minimal noise. Featuring a 1/4" high-impedance input and thru with -15db pad and a balanced XLR output with ground lift.

Premium - without the price tag:
Direct boxes are an essential tool for any stage or studio. They make it easy to get clean, low-noise audio to a mixer no matter what instrument you are using. Available in four versatile models, our ultra-affordable DI's offer the Mackie sound quality that you expect with 'Built-Like-A-Tank' construction for maximum reliability. From acoustic guitars to laptops, be ready for anything with MDB Series direct boxes.

The Perfect Match:
With four models to choose from, you can get the perfect match for your instruments. Acoustic guitars and keyboards are right at home with the MDB-1P and MDB-2P. High output instruments will appreciate the extra headroom in the MDB-1A.

Premium Analog Circuitry:
MDB Series direct boxes offer excellent noise performance and transparency. Whether you are in the studio or performing on stage, your instruments will always sound as good as they do at the source.

'Built-Like-A-Tank':
From the inside out, MDB Series direct boxes are built to last. Thick steel chassis, impact resistant corners, and long-wearing jacks will keep these in your bag for years to come.

Get the best sound from your laptop:
The MDB-USB is the ultimate way to get pristine digital audio from your laptop directly to a mixer or front-of-house in a venue.
Read more
 1 in stock $49.81
Cat: 708927 Rel: 09 Nov 18
 
DI box ideal for use with electronic musical instruments
Notes: The Passive DI Box converts high impedance unbalanced signals such as musical instruments to a low level balanced output signal, eliminating unwanted noise and reducing loss of high frequencies when using long cables. With 1 x 6.35 mm mono socket input and 1 x 6.35 mm link output for connection to an on-stage combo, etc, and XLR socket output. Constructed with a strong metal case for durability, this piece of kit is built for reliable, everyday use.
Read more
 1 in stock $22.66
Cat: 647536 Rel: 28 Apr 17
 
Passive cabinet merger
Notes: The concept behind Palmer's Cab Merger may be very simple, but the unit fills an important gap! Have you ever wanted to connect two guitar cabinets to just one amplifier output? It's quite simple with the PCABM!

In addition, you can choose parallel or series wiring. For instance, two 8 ohm cabinets can be connected for a total load of 4 ohms (parallel) or 16 ohms (in series). The device is entirely passive and does not affect tone in any way.
Read more
 2 in stock $28.11
Cat: 647580 Rel: 28 Apr 17
 
Passive DI box with transformer balanced XLR output
Notes: Passive DI box. Jack input with parallel "THRU" output, transformer balanced XLR output. Attenuable input sensitivity, can handle both line level and speaker level signals.
Read more
 2 in stock $41.94
Artikel 1 bis 9 von 9 auf Seite 1 von 1 anzeigen

Filter

DI boxes
DJ-Ausrüstung
Release Date
Featured
Close