100% Sicheres Einkaufen

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Sicheres Einkaufen

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Coming Soon: Studio Equipment

View:
Options
Artikel 1 bis 50 von 174 auf Seite 1 von 4 anzeigen
1  2  3  4  »
FORTHCOMING
Tangible Waves AE Modular LFO Module
Cat: 719694
 
LFO module
Notes: The LFO module generates modulation voltages mostly below the audio range; this module offers:

- PWM modulation for the Pulse out
- RATE knob for controlling the frequency
- SLOW/FAST switch for two frequency ranges; with FAST the rate can go into the lower audio range
- Triangle/Sawtooth switch; changes the waveform of the output
- PULSEWIDTH knob, this sets the pulsewidth of the according output
- Control LED for sawtooth/triangle and for pulse
- Three separate output signals: Square (even duty cycle), TRIANGLE/Sawtooth, Pulse
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 3VCSWITCH Multi Purpose Electronic Switch Module
Cat: 719697
 
Three multi-purpose electronic switches
Notes: 3VCSWITCH contains three electronic toggle switches that can be operated either manual (latched or momentary by two buttons) or by an external gate signal. The connection by the switch is bidirectional and can be used for any kind of signal within AE modular, e.g. for dynamic signal routing/selection of modulation sources.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 10 x Patchwires (10cm)
Cat: 719704
 
Pack of 10 patch wires
Notes: A set of 10 Patchwires for AE modular; with a length of 10cm.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 10 x Patchwires (25cm)
Cat: 719705
 
Pack of 10 patch wires
Notes: A set of 10 Patchwires for AE modular; with a length of 25cm.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 10 x Patchwires (40cm)
Cat: 719706
 
Pack of 10 patch wires
Notes: A set of 10 Patchwires for AE modular; with a length of 40cm.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 10 x Patchwires (50cm)
Cat: 719707
 
Pack of 10 patch wires
Notes: A set of 10 Patchwires for AE modular; with a length of 50cm.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular Power Splitter Cable
Cat: 719717
 
Power splitter cable for AE modular
Notes: The Power Splitter Cable allows it to power up to four devices with one Power supply adapter. The PSU you find here has enough capacity to run up to four AE modular racks (or other devices with 9V supply voltage). Please make sure the total current consumption is below 1.3 amperes!

Recommended if you use extender cables, as the four cables of this splitter are only 20cm in length each.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular Power Extender Cable
Cat: 719718
 
Extender cable for AE modular
Notes: This extender cable is useful if you use the power splitter cable; the length of 1m allows it to arrange your devices as you like and still have them powered by one single power supply.

Length: 1m

Plugs: 5.5 x 2.1 mm female / 5.5 x 2.1 mm male
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular MIDI Breakout Cable
Cat: 719720
 
MIDI breakout cable for AE modular
Notes: The MIDI Breakout Cable is an adapter from the "classic" DIN-5 MIDI Socket to a stereo 3.5mm minijack plug, which is used as MIDI in on AE modular.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 4U Blank Module
Cat: 719726
 
Blank module for AE modular - 4U
Notes: If your rack isn't filled completely with modules, use this blank module to fill the spaces.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 8U Eurorack Adapter Frame
Cat: 719727
 
AE modular Eurorack adapter frame
Notes: The AE modular Eurorack adapter frame allows to integrate AE modular modules into Eurorack systems. It is basically an empty Eurorack-sized frame that can take up to 8 units of AE modules where two units are occupied by the mandatory MASTER module. Via the MASTER module the frame is powered from the Eurorack bus.

The product includes:

- The mounting frame with screws for mounting the AE modules
- The ribbon cable for Eurorack bus connection
- The bus cable
Read more
coming soon TBA
FORTHCOMING
Erica Synths Black Spring Reverb Module
Cat: 732832 Rel: 01 Jul 19
coming soon TBA
FORTHCOMING
Teenage Engineering ZM1 Oplab Expansion Module For OPZ
Cat: 725944
 
User-installable hardware expansion for the OP-Z synthesizer workstation
Notes: Imagine having the power and flexibility of the OP-Z sequencer available to any other music equipment. Now you can, with the new Oplab module - the magic link between OP-Z and the rest of the world. The Oplab module is the first hardware expansion module for OP-Z. Once mounted in the back of your OP-Z, you can use it to connect to any equipment using standard cv and gate, such as the pocket operator modular or any other modular system. It features three cv outs and one gate out, all programmable and playable from OP-Z. Have your wall of modules sequenced from the palm of your hands. Use the po sync out to unleash the power of your regular pocket operators and have them play in sync with the rest of your setup. Even connect standard midi devices, using midi over 3.5 mm jack or the included midi over din adapter cable. Oplab features both midi in and out ports as well as trig in and out for other synthesizers and sequencers.
Read more
coming soon TBA
FORTHCOMING
Make Noise XOH Stereo Line Headphone Amp Module
Cat: 732818 Rel: 01 Jul 19
coming soon TBA
FORTHCOMING
EBS The Ultimate Billy Sheehan Signature Drive Pedal
EBS
Cat: 718776
 
Flexible overdrive/compression pedal designed in collaboration with Billy Sheehan
Notes: When Billy Sheehan first turned to EBS to create his signature pedal, he needed to capture the essence of his sound in a pedal to serve him when he could not bring his entire rig. It turned out so great it has been a significant part of his main setup ever since and served thousands of other bass players as well. Now it's time for the ultimate version!

"This pedal is a distillate of several important principles in the signal chain for bass. Compression, distortion, tone-shaping and blending all together", Billy said when EBS released his first signature pedal in 2013. The original concept is still the same, but with more features added along the way.

Since the pedal splits the signal into two parallel paths - one clean and one with distortion - it becomes as if running the sound through two different bass rigs at the same time. The two Clean and Drive Level controls decides how you set the mix and melt the paths together. For a tighter, more defined sound you can engage the built-in compressor. Threshold settings for the compressor can be adjusted inside.

A Phase Inverter switch brings back more low-end to the drive channel at times. The Boost footswitch kicks up the drive gain a notch when needed.

The new and major feature of the Ultimate version is the Hi or Lo Frequency Filter. This switch moves the whole frequency spectrum of the Tone filter up or down, to extend the capabilities of the pedal.

The Hi setting adds a whole new palette of distortion sounds that was not possible to create with previous versions of the pedal.

The individual Effect Loops for each channel can be used to colour the channels individually with external effects. The Clean Loop jack can also be used as a clean input if you have a bass that features dual outputs. It sounds great if you run the lows through the Clean Loop jack while the mids/highs go through the main input, which leaves the lows untouched and only the higher frequencies treated by the drive.

This version has inherited all the features from the Deluxe version (including the possibility to swap the drive chip without the need of soldering). But the palette of sounds you can create is expanded by the new Hi or Lo frequency filter to make it complete.
Read more
coming soon TBA
FORTHCOMING
EBS MicroBass 3 Preamp Pedal
EBS MicroBass 3 Preamp Pedal (preamp pedal/DI box)
EBS
Cat: 718777
 
Professional analogue bass preamp/DI box
Notes: The EBS Microbass 3. We've all been there. Being forced by circumstances to rely on someone else's gear and left with that uneasy feeling it could turn into a disaster. With the new EBS Microbass 3, you can let go of that feeling and be confident you'll have your sound no matter the situation.

The EBS MicroBass 3 is a 2-channel preamp, built exclusively with premium components. It is engineered by EBS in Sweden with technologies from the famous HD360 and Fafner II amplifier designs. The preamp operates at a signal level equal to a professional mixing console (+/- 15V) which gives you plenty of headroom. The high signal level makes it suitable to use as a preamp in combination with any type of power amp.

Run the Clean and Drive channels in series or parallel. Use the dual balanced XLR-outputs to tap the signal post and pre EQ at the same time. If you run the Effects loop in stereo mode, the balanced outputs become a Left and Right output instead. With 10 Mohms input impedance, it handles any type of bass - passive, active or with piezo pickups.

The built-in tuner makes it easy to tune between songs without the need of an external device. The MicroBass 3 also carries an onboard compressor, similar to the one found on several EBS amplifiers, and several more features.

The analog EBS MicroBass 3 ensures your sound - every time.
Read more
coming soon TBA
FORTHCOMING
ALM Pamela's Discotheque Analogue DIN Sync Clock Device For Use With Pioneer CDJ's
coming soon TBA
FORTHCOMING
ART Patch In Patchbay & Insert Point Pedal
Cat: 719376
 
pedalboard patch-bay & insert point
coming soon TBA
FORTHCOMING
ART L Switch Latching Footswitch Pedal
Cat: 719377
 
Latching switch for effects or amps
Notes: The LSwitch is a normally closed (NC) latching footswitch for use with various effect units or amplifiers that have an external footswitch jack. The onboard LED is supplied power by the switching circuitry on the host device; not all host units will necessarily power the LED properly, but the footswitch will work in spite of this.
Read more
coming soon TBA
FORTHCOMING
ART Loop Switch Effects Switcher & True Bypass Pedal
coming soon TBA
FORTHCOMING
Behringer DS80 Polyphonic Analogue Keyboard Synthesiser
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular RACKLINK 2 x Module Kit (connect 2 AE cases using RACKLINK)
Cat: 719690
 
2 x Eurorack modules + cable
Notes: Connect two AE cases with RACKLINK!

The RACKLINK is a module for connecting two AE cases; the kit contains of 2 identical modules and a connector cable (length 50 cm). The modules are placed in both cases and are connected by the cable.

By this, you get the following:

The second case is powered by the first one

All bus lines (CV, GATE, CONTROL, MIDI clock/start/stop) are connected to the second case

Additionally, there are 8 connections that can be freely used; so it is not necessary to have connections between two cases. E.g. the second rack can run a patch for a drone sound, the output is then sent via Racklink line 1 to the first rack and here patched to a mixer, via line 2 the second rack can receive a modulation signal from the first one. The lines are bi-directional!
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 2OSC V2 Dual Oscillator Module
Cat: 719691
 
Dual oscillator
Notes: The 2OSC module contains two oscillators; each of them features:

- One frequency knob
- CV input (1V/octave)
- PWM input
- SYNC input
- Square/Saw/Narrow pulse (sync) output

The first oscillator additionally has a pulsewidth knob; the second oscillator can be pulsewidth-modulated by the PWM input.

The 1V/octave characteristic and stability in this module is a bit less than in the VCO module; but on the other hand you get two oscillators in one small module!
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular VCO Module
Cat: 719693
 
Classic VCO for AE modular
Notes: The VCO module is a "classic" VCO featuring:

- Two CV inputs 1V/octave
- MODulation input with Level-knob, switchable to frequency or pulsewidth
- PWM input
- Coarse/Fine knob for frequency
- Pulsewidth knob for squarewave
- Square/Triangle/Sawtooth output

The module works well if you need an oscillator for primary musical/melodic use.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 2SIGNALAMP Dual Audio Signal Amplifier Module
Cat: 719699
 
Amplifier for audio signals
Notes: 2SIGNALAMP contains two amplifier stages for audio signals; the amplification can be adjusted up to 15:1.

A clip LED indicates that the amplified level exceeds the usual range of AE modular and is short before clipping.

Main purpose of this module is to boost external audio signals for further processing within AE modular, or also the triangle output of the VCO which has by design a lower signal amplitude.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular USBPOWER Triple USB Power Output Socket Module
Cat: 719700
 
Three USB power output sockets
Notes: Each of the three USB-A sockets on the USBPOWER module can be used to charge your mobile phone, connect a USB lamp or supply power to any other USB device. Furthermore, the output socket provides +5V and ground to supply e.g. DIY circuits on a breadboard.

Please note: This is only a power source via USB sockets; no USB data communication is possible here.

Includes additional USB lamp!
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 2OSC/d Dual Hybrid Oscillator Module
Cat: 719701
 
Dual hybrid oscillator
Notes: The 2OSC/d module contains two 1V/octave hybrid oscillators. Each of them features:

- One frequency knob plus a range switch +2 octaves
- CV input (1V / octave)
- PWM input
- SYNC input
- Sawtooth/Square/Sub-octave output

The pulsewith knob controls either the pulsewidth of the first oscillator (with the second one having a fixed pulsewidth), or via a switch the second oscillator is also controlled by the pulsewidth knob. Both oscillators can be pulsewidth-modulated independently by their PWM inputs.

The module is designed as a hybrid digital/analogue module; the oscillator frequencies are determined digitally and are therefore quite stable and have a good tracking; the output wavefom itself is created analogue. It's a new idea/concept that I have implemented here; the design causes the waveform to get a bit gritty at higher frequencies (but not "digital noise") - it's the character of this thing!
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular Type 1 Bus Cable
Cat: 719711
 
Bus cable for AE modular
Notes: The Bus Cable connects the AE modular modules, it contains the power supply (GND, +5V) and CV, Gate, Controller, MIDI-clock/start/stop in a 10-pin ribbon cable. The folding pattern makes it possible to mount/unmount the module connected to the cable.

It has 16 sockets; one for connecting to the MASTER module and 15 for all other modules.

PLEASE NOTE: Type 1 is for a 1-row rack or the upper part of a 2-row rack (the row where the MASTER module is).
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular Type 2 Bus Cable
Cat: 719713
 
Bus cable for AE modular
Notes: The Bus Cable connects the AE modular modules, it contains the power supply (GND, +5V) and CV, Gate, Controller, MIDI-clock/start/stop in a 10-pin ribbon cable. The folding pattern makes it possible to mount/unmount the module connected to the cable.

It has 17 sockets; one for connecting to the MASTER module and 16 for all other modules.

PLEASE NOTE: Type 2 is for the lower part of a 2-row rack (the row below the MASTER module).
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 9V Power Supply Adapter (1.3A)
Cat: 719715
 
Power supply for AE modular
Notes: This power supply adapter is suitable for AE modular and other devices. The maximum current of 1.3A is enough to feed several AE modular racks in parallel.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 10 x Patchwires (17cm)
Cat: 719721
 
Pack of 10 patch wires
Notes: A set of 10 Patchwires for AE modular; with a length of 17cm.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 1U Blank Module
Cat: 719722
 
Blank module for AE modular - 1U
Notes: If your rack isn't filled completely with modules, use this blank module to fill the spaces.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 2U Blank Module
Cat: 719725
 
Blank module for AE modular - 2U
Notes: If your rack isn't filled completely with modules, use this blank module to fill the spaces.
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 12U Eurorack Adapter Frame
Cat: 719730
 
AE modular Eurorack adapter frame
Notes: The AE modular Eurorack adapter frame allows to integrate AE modular modules into Eurorack systems. It is basically an empty Eurorack-sized frame that can take up to 12 units of AE modules where two units are occupied by the mandatory MASTER module. Via the MASTER module the frame is powered from the Eurorack bus.

The product includes:

- The mounting frame with screws for mounting the AE modules
- The ribbon cable for Eurorack bus connection
- The bus cable
Read more
coming soon TBA
FORTHCOMING
Tangible Waves AE Modular 16U Eurorack Adapter Frame
Cat: 719731
 
AE modular Eurorack adapter frame
Notes: The AE modular Eurorack adapter frame allows to integrate AE modular modules into Eurorack systems. It is basically an empty Eurorack-sized frame that can take up to 16 units of AE modules where two units are occupied by the mandatory MASTER module. Via the MASTER module the frame is powered from the Eurorack bus.

The product includes:

- The mounting frame with screws for mounting the AE modules
- The ribbon cable for Eurorack bus connection
- The bus cable
Read more
coming soon TBA
FORTHCOMING
Erica Synths Black Input Module
Cat: 732837 Rel: 01 Jul 19
coming soon TBA
FORTHCOMING
Erica Synths Pico VC EG Voltage Controlled Envelope Generator Module
coming soon TBA
FORTHCOMING
Erica Synths Pico BBD Bucket Brigade Device Delay Module
coming soon TBA
FORTHCOMING
Erica Synths Pico Ring Modulator Module
Cat: 732852 Rel: 01 Jul 19
coming soon TBA
FORTHCOMING
Erica Synths Pico Drum 2 Module
Cat: 732840 Rel: 01 Jul 19
coming soon TBA
FORTHCOMING
Erica Synths Pico VCO 2 Module
Cat: 732841 Rel: 01 Jul 19
coming soon TBA
FORTHCOMING
Erica Synths Pico LPG Low Pass Gate Module
Cat: 732843 Rel: 01 Jul 19
coming soon TBA
FORTHCOMING
Steinberg AXR4 Audio & MIDI Interface
coming soon TBA
FORTHCOMING
Critter & Guitari USB WiFi Adapter For Organelle & ETC Synthesisers
coming soon TBA
FORTHCOMING
Critter & Guitari 16GB USB Drive For Organelle & ETC Synthesisers
coming soon TBA
FORTHCOMING
Erica Synths Pico Seq 2 Sequencer & Waveshaper Module
coming soon TBA
FORTHCOMING
Erica Synths Pico Noise Module
Cat: 732846 Rel: 01 Jul 19
coming soon TBA
FORTHCOMING
Erica Synths Pico LFO/S&H Module
Cat: 732847 Rel: 01 Jul 19
coming soon TBA
FORTHCOMING
Erica Synths Black Sequencer Module
Cat: 732854 Rel: 01 Jul 19
coming soon TBA
FORTHCOMING
Erica Synths Cowbell Module
Cat: 732855
coming soon TBA
Artikel 1 bis 50 von 174 auf Seite 1 von 4 anzeigen
1  2  3  4  »

Filter

Coming Soon: Studio Equipment
Close