All genres charts

Notes: The new PerFourMer is a real analog synthesizer, through its simple control surface and very flexible sound production it is able to offer a near inexhaustible variety of Bass, Lead, Pad and Effect sounds. Additionally, with its total of six filter inputs, the PerFourMer is also perfectly suited as a complex filter-bank. Even though the PerFourMer is not considered a modular system, it can still be described as a modular or at the very least a semi-modular. The basic concept is reminiscent of classics such as the Oberheim 4 Voice or the Korg Monopoly.

The PerFourMer is a 4 voice synthesizer, consisting of completely independent synthesizers, which can be adjusted and played independently from each other. These four synthesizer channels can be linked with each other and be played in 3 different operating modes.

Next to the already mentioned filter inputs, each channel has a single output, which can also be used as an insert for external effect devices, and make it possible to easily integrate the PerFourMer with already established equipment. It is also possible to transmit the unedited VCO signal. Additionally the opportunities of the PerFourMer can be expanded through internal patching between the channels, for example; you can route a VCO through multiple filters and VCAs, or use 2 channels to create 1 voice with 2 ADSR envelopes (1 for VCA and 1 for VCF). Use the PerFourMer as a filter-bank and the slope envelope can be doubled by interconnecting the filter in series. The PerFourMer is controlled via MIDI and additionally via CV/gate (1V/octave) inputs for every synthesizer channel.

Notes: The Korg Monotron Duo is capable of creating even stranger, extreme and diverse sounds. The combination of 2 oscillators in unison provide thick, rich analogue tones, while tuning them to different intervals can create classic solo synth sounds and powerful effects. Korg have utilized their X-Mod (cross modulation taken from their classic Mono/Poly synths) circuitry in the Monontron Duo, enabling you to generate the mildest of sounds, to vibrant vibrato, to sharp, fm style abrasive synth sounds.

The Monotron Duo features Korg's fantastic enhanced ribbon controller keyboard and now features the same scale function as used on the Kaossilator, chromatic, major, minor or off scales are available, allowing your music juices to flow freely over any music. The distinctive tone of an analog filter (VCF) can dramatically alter and enrich the sound. The Monotron Duo uses the same highly acclaimed VCF circuit as Korg's classic MS-10 and MS-20 semi modular synthesizers. Originally released over 30 years ago, these instruments are still coveted today for their aggressive, dynamic filters. The VCF Cutoff knob sets the frequency or tone of the filter; the VCF Peak knob adds emphasis. A powerful filter is an essential aspect of any analog synthesizer, applying dramatic tonal changes to the sound, and projecting an intense personality that will stand out in any live performance.

The input jack (AUX input) built into the Monotron Duo's compact body allow you to place any audio source into the Monotron Duo's signal path, directly before the analog filter. This provides a great way to connect a Kaossilator, a guitar, or a digital audio player to the Monotron and enjoy tone-bending filter effects.

A miniature speaker is built into the Monotron Duo. Along with the battery operation and compact size, this feature allows you to enjoy the share the Monotron Duo's analog synthesis sound with your friends, anywhere, at any time. There's also a headphone output that you can use when practicing in private, creating sounds at home, recording, or for connecting to an amplifier or PA system.

http://www.youtube.com/watch?v=wWLOxRSll5Q

Notes: Inspired by the legendary UDG ProducerBag, the UDG Ultimate ProducerBag Large has been created to cater for those electronic musicians who crave more space for their performance equipment.

Fits: Pioneer DJM-S5, Toraiz SP-16, Denon DJ Prime Go, Novation AFX, Akai MPC Live II, Reloop Elite, Rane Seventy, Seventy-Two, NI Maschine Jam, and various pedalboards

The UDG ProducerBag Large offers increased space for performers using laptops up to 18.4" and larger MIDI Controllers. Constructed from high quality fabrics, the backpack style UDG ProducerBag Large features padded walls with an adjustable divider to create an internal partition to suit your own requirements. Available in black, the bag offers both comfortable transportation and padded protection for your valuable items.

Specifications

Colour: Black, Orange inside
Weight: 3,25 kg / 7.15 lbs
Outer Dimensions (W x H x D): 56.0 x 45.0 x 18.0 cm | 22.0 x 17.0 x 7.1 inch
Inner Dimensions (W x H x D): 46.5 x 32.0 x 15.0 cm | 18.3 x 12.6 x 5.9 inch
Material: Water Resistant Nylon 420D
Protection: Padded MIDI Controller compartment
Bottom guards fabrics protect from scuffing and abration.

Extras

6 pockets for Accessories and smaller gears
Top carry handles
Ergonomic detachable shoulder strap
Integrated combination lock.

Fits:

Up to 18.4" laptop
Pioneer DJM-S5, Toraiz SP-16, DJS-1000, DJM-750MK2
NI Traktor Kontrol S2 MK2, Maschine Jam/ MK3/ MK2, Traktor Z2
Denon DJ Prime Go, MC6000 MK2, MC3000
Numark iDJ Live II, Mixtrack II / Pro II
Rane Seventy, Seventy-Two
Akai MPC Live II, APC 40 MK2, MPD232, MPD26, MPD32
Reloop Elite, Beatpad/2, Beatmix, Digital Jockey-3, Jockey 3 Remix, Terminal Mix 2
Novation AFX, 25SL MK2, Launchkey 25, Nocturn 25
Hercules DJConsole RMX2, DJControl Jogvision, DJ Control Air+ S
M-Audio Oxygen 25, Trigger Finger Pro, Xponent
Stanton SCS.4DJ, DJC.4
Livid OHM 64
Vestax VCI-380/400/400DJ,
Arturia Drumbrute, Keylab 25
Various pedalboards

Notes: The UDG Ultimate DIGI Backpack Black/Orange Inside is specially designed to cater for the laptop-based generation DJ affording them maximum functionality with performance orientated style.

Fits: Pioneer DJM-S5, DDJ-XP2, DDJ-200, Akai MPC Live II, NI Maschine MK3/ Jam, Numark Scratch, PT01 Scratch, or similar size controllers.

Ultimate DIGI Backpack specially designed for the laptop DJ. Constructed from high quality water resistant Nylon, it contains a cleverly designed side entry compartment for a laptop up to 15.4" without having the hassle of going through the main body of the bag. The bag main compartment can hold an extra laptop and it can also hold a Native Instruments MASCHINE MK2 size MIDI controller. There is a detachable interface pouch and on top of the bag there is a padded, quick access headphone pocket. There are 5 zipped compartments to securely store USB sticks, SD cards, wires and cables, AC power adapters, compact camera's, MP3 player, and other accessories.

Specifications

Colour: Black, Orange inside
Weight: 1,80 kg / 3.96 lbs
Outer Dimensions (W x H x D): 43.0 x 31.0 x 28.0 cm | 16.9 x 12.2 x 11.0 inch
Inner Dimensions (W x H x D): 42.0 x 30.0 x 13.0 cm | 16.5 x 11.8 x 5.1 inch
Material: Water Resistant Nylon 450D
Protection: Various padding used

Extras

Front compartment with organization panel and detachable pouch for audio interface
5 exterior pockets for personal essentials, including one with earbud pass-through for Mp3 players
S-curved shoulder straps for ultimate comfort.

Fits:

Up to 15.4" laptop, LP's
Pioneer DJM-S5, DDJ-XP2, DDJ-200, DDJ-XP1, DDJ-SP1, DDJ-WeGO 3/ 4, Toraiz Squid
NI Maschine MK3/ Jam/ MK2
Denon DJ MC2000, SC2000
Akai MPC Live/ II, MPD226, MPD232, MPD32, MPD26, MPK Mini MK II, MPC Element, MPC 500, APC 20, APC Key 25
Ableton Push/ 2
Allen & Heath Xone 23/ C, Xone 43C
Novation Launch Control XL, LaunchPad Pro, Circuit, Twitch, Numark Scratch, Omni Control, Stealth Control, Party Mix, iDJ Live II, Mixtrack Edge
Reloop Beatmix, Digital Jockey III/ II, Mixage IE, Neon
Roland Aira MX-1, TR-707, MC-202, TR-8, TR-8S
Korg MicroKey 25
M-Audio Oxygen 25, Trigger Finger Pro,
Arturia Drumbrute
Gemini FirstMix Pro, Slate2, Slate4, CDJ-700,
Hercules P32 DJ Controller, Universal DJ, DJ Consule 4-MX, DJ Control Air S, DJ Control Wave, DJ Control Instinct
Livid CNTRL:R
Stanton DJC.4
Vestax Spin 2, VCI-300/MK2, VCI-100/MK2
Audio interface or MP3/MP4 player, books and magazines

Notes: The Kenton Merge 4 can merge the data from up to 4 separate MIDI sources (e.g. Master keyboards or controllers) into a single MIDI data stream which appears at both of the MIDI out sockets. It features 4 opto-isolated MIDI inputs and 2 MIDI outputs.

The Kenton Merge 4 is powered from a mains adaptor (wall wart) so you can fit and forget.

Comes with multi-region power supply

Notes: The Chord cable lead is the high quality audio lead for exceptional sound quality and reliability. The high grade cable comprises 2 insulated pure copper cores and global shielding. The durable PVC sheath has a soft texture and is reinforced with cotton cord to avoid tangling. Each end is terminated with a pro-quality 6.3mm stereo (TRS) jack plug.

Notes: The Chord cable lead is the high quality audio lead for exceptional sound quality and reliability. The high grade cable comprises 2 insulated pure copper cores and global shielding. The durable PVC sheath has a soft texture and is reinforced with cotton cord to avoid tangling. Each end is terminated with a pro-quality 6.3mm stereo (TRS) jack plug.

Notes: The Chord cable lead is the high quality audio lead for exceptional sound quality and reliability. The high grade cable comprises 2 insulated pure copper cores and global shielding. The durable PVC sheath has a soft texture and is reinforced with cotton cord to avoid tangling. Each end is terminated with a pro-quality 6.3mm stereo (TRS) jack plug.

Notes: The Chord cable lead is the high quality audio lead for exceptional sound quality and reliability. The high grade cable comprises 2 insulated pure copper cores and global shielding. The durable PVC sheath has a soft texture and is reinforced with cotton cord to avoid tangling. Each end is terminated with a pro-quality 6.3mm stereo (TRS) jack plug.

Notes: Pulse 2 Analog Synthesizer is proof positive that good things can come to those that wait. For ever since this high-quality synthesizer developer discontinued its original rack-mountable Pulse and Pulse+ programmable analogue monosynths boasting ballsy bass tones and legendary leads beyond compare, those Nineties electronic musicdominating sounds have been severely sought after by those in the know. Which was exactly what drove us into development overdrive to produce an all-new Pulse fit for the 21st Century.

As an all-new, all-analogue synthesizer design, Pulse 2 flawlessly delivers exactly what synth connoisseurs around the world have been truly craving for quite some time - three analogue oscillators living in perfect harmony with a VCF (VoltageControlled Filter), yet we did not stop there: the fresh filter circuits in the Pulse 2 now offer 12dB Highpass and Bandpass modes in addition to 24dB/12dB Lowpass for strengthened sound-sculpting flexibility, while we added analogue Filter FM, two Overdrive circuits, and Ring Modulation from OSC 3, together with Paraphonic and Unison modes allowing up to eight-voice chords - a fantastic feature found on our recently-released Rocket Synthesizer.

Pulse 2 is housed in a sturdy metal desktop casing. Alongside its generous 128x64-character backlit LCD, eight eye-catching stainless steel knobs are available to nimbly navigate through the parameter matrix - logically laid out across the front panel for all to see at all times, set the master Volume, and easily edit display-accessible parameters.

Connectivity comes well catered for courtesy of USB, MIDI In, MIDI Out, Ext In (external analogue signal input), line OUT, and headphone output - not forgetting, of course, CV Out (supporting both the V/octave and Hz/V standards) and Gate Out (V-Trigger- and S-Trigger-compatible), allowing a myriad of suitably equipped older (or newer) synths to be connected to the Pulse 2 to mirror whatever MIDI 'note' information is being played by the Pulse 2, including the output of its powerful ARP (arpeggiator). And if that's not enough to be getting on with, the CV Out can even be modulated in the eight-slot modulation Matrix, making for even more tantalising tone colours and performance possibilities!

Alongside analogue must-haves like a noise generator, Pulsewidth modulation, and hard Sync, other notable features include an Alternating Pulsewidth Modulation mode new to the Pulse 2 (offering a dense PWM sound without affecting perceived loudness), and an XOR Osc mode (that is a binary XOR combination of two PWM oscillators with two distinct output levels - high and low only - capable of producing inharmonic spectra unlike anything associated with any analogue synthesizer other than the original Pulse) - all of which, of course, contribute to kickstarting those still soughtafter sounds right here, right now in the 21st Century. Speaking of which, 500 onboard sound programs should be more than
enough to keep the most diehard synthesist smiling! What's more, all are backwards-compatible with the original Pulseseries, so original Pulse owners can quickly transfer their favourite sounds to their new Pulse 2 via MIDI (dump).

Notes: Balanced microphone/audio lead terminated at one end with an XLR socket and at the other end with an XLR plug.

Notes: The NT5 matched pairs are a masterpiece of small-diaphragm cardioid-condenser microphone design.

Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a 1/2" capsule, an active J-FET impedance converter with bipolar output buffer.

Finished in durable satin nickel, the NT5 is intended for either single or stereo X/Y mic set-ups. The NT5 matched pairs comes supplied in a custom carry case with windshields and mounts.

NT5 - Matched Pair Box Contains :

As of 2022, the updated packaging is made from engineered cardboard instead of foam or plastic blister, making it more environmentally friendly, and they all share a unified look to further enhance brand consistency.

RODE have also made a change to the box contents removing the hard cases and including a zip case instead. This has meant that the new dimensions of the packaging are significantly smaller than the original packaging.

2 x NT5
2 x RM5 (mic clip)
2 x WS5 (windshield)
1 x ZP1 (zip pouch)

Notes: Heavy duty keyboard stand with 5 height adjustments via a robust locking mechanism. The product is easy to assembly and folds down to a very compact size for storage.

Ideal for Use with Most Keyboards
Quick and Simple self-assembly
Light Weight and Portable with a Maximum load of 22kG
Folds Down for Easy and Compact Storage

Notes: This pack of 6 guitar audio patch leads from Chord is designed for connecting effects processors, sound modules, pedals etc. in coloured insulation. They are terminated at each end with a right angled 6.3mm jack plug.

Notes: This pack of 6 guitar/audio patch leads from Chord is designed for connecting effects processors, sound modules, pedals etc. in coloured insulation. They are terminated at each end with a right angled 6.3mm jack plug.

Notes: *** Synthesizer comes with a free copy of The Waldorf Edition software, including D Pole Filter Module, PPG Wave 2.V & Attack ***

Waldorf are back in the game. With the Blofeld. this synthesizer offers all the unique qualities that made Waldorf a truly legendary brand.

The engine inside the heavy duty, full metal chassis of the Blofeld delivers the same fat and rich sound that so many Waldorf users worldwide love when they play their Pulse, Q, Q+, Micro Q, Microwave, Microwave II/XT, or even the flagship Wave.

Yes, you've heard it right. The Blofeld is not only capable of producing these warm, organic analog sounds known from the Q synthesizer line, it also sports a wavetable engine like its predecessors with Wave in their names.

This unique synthesis system is based upon the revolutionary PPG Wave synthesizers of the early 80s. So when you listen to the Blofeld for the first time, you will instantly recognize those edgy, hard-hitting and bell-like timbres that have been an integral part of so many world hits from the PPG era on, and become increasingly popular once more.

In fact it is amazing to realize that nowadays this complex technology fits into such a slim and elegant device. And for a price no-one would have imagined a couple of years ago.

Notes: Vintage and more.

With its unmistakably unique exterior and its inimitable sound, the microKorg set the standard for analog modeling synthesizers. The year 2008 saw the introduction of the microKorg XL, which inherited the microKorg's fat and powerful sounds, while adding keyboard staples such as electric piano and the CX-3 organ. And now, in the next evolutionary step, the microKorg XL+ delivers a fresh update to the sounds and design of the microKorg XL, making it the ideal compact keyboard.

The microKORG XL featured a sound selector that lets you choose your sound using 2 large dials: music genre and instrument category. The new microKORG XL+ offers an additional selection of these music genres to fit today's fast-moving music scene. Now you can select a program that matches your song more intuitively than ever. For even more convenience, you can also leave one of the dials fixed and only use the other dial to make program changes during a song (music genre fixed), or use the dial to select vocoder variations (instrument category fixed).

Lush analog modeled synthesizer sounds that are characteristic of the microKORG have been freshly added to the microKORG XL+. In addition, for band use, the microKORG XL+ comes equipped with the piano sound from Korg's classic stage piano, the SGproX (famous for its ability to stand out in your band's mix), as well as its hard-edged grand-type electric piano. This compact package also includes sounds from the M1 and the VOX organ, vintage tape-type string and flute machines, as well as other gorgeous sounds from keyboard history. Each of these 128 programs are genuinely usable sounds, giving the microKORG XL+ plenty of variety to serve as your main keyboard or of course as a secondary keyboard in your rig.

The microKORG XL+ projects a style that's reminiscent of vintage electric pianos, featuring a futuristic yet retro design with a stylish black panel. High-quality parts such as metal levers, dials that move with an audible click, and knobs with a sturdy operating feel are some of the ways that the microKORG XL+ outclasses other instruments in its range and enhances your experience editing synthesizer sounds.

The microKORG XL+'s sound engine uses MMT (Multiple Modeling Technology), borrowing from Korg's well proven wealth of analog modeling technology. The MMT sound engine has been featured on numerous products, and provides 2 oscillators that generate huge powerful sounds. Oscillator 1 (OSC1) gives you a total of 7 types of oscillator algorithm to choose from, including formant waveforms such as human voice, and PCM/DWGS waveforms for vintage keyboard and strings. It also lets you use techniques that cannot be imitated on typical PCM synthesizers, such as cross modulation, unison, and VPM (Variable Phase Modulation). By taking advantage of modulation (sync or ring) with oscillator 2 (OSC2), it's easy to create complex and powerful sounds.

The microKORG XL+ can function as a powerful vocoder that lets you connect a mic and use its audio input to shape the tonal character of the oscillator's sound to create talking effects. The vocoder consists of a 16-band filter bank that can simulate the vocoder sounds of the past and also shift the filter frequencies (Format Shift function) or adjust the level and pan of each band to dramatically change the sonic character. Using the Vocoder is an easy way to add sounds that can be found in today's popular electronic music. Since a gooseneck microphone is included, you can immediately start using thevocoder in your songs.

2 master effects utilize the effect engine that was brought to perfection in Korg's Kaoss Pad series, giving you a total of 17 powerful effect types including delay and echo effects as well as dramatic effects such as ring modulator and grain shifter. In addition, effects such as delay can be synchronized to MIDI clock for a wide range of possibilities in live performance.

Notes: Wooden side cheeks for The Vermona DRM1 (any mark).

If you would like to use those instruments as desktop unit you do cover the rack mount wholes with these nice wood sides, the unit feels much more handable and robust while packaging and using it in your live set.

Notes: Replacement coiled cable with gold-plated 3.5mm mini plug and 6.35mm adapter, for DT 250-series headphones.

Notes: The DeadCat VMP is a furry wind cover for the VideoMic Pro, designed for use in windy environments.

Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent.

Notes: Used by artist's such as Dubfire, Richie Hawtin and Carl Craig the d+ RCA series is specialized for DJs and designed according to feedbacks of DJs, Artists, and Clubs. By connecting between a DJ mixer and some DJ equipments such as CDJ, Traktor and Serato, you can get a huge advantage about the sound quality.

About the product planning for the d+ RCA series, Neo contemplated the best combination of important materials and factors such as its structure, conductor, insulator, shielding, outer sheath, and contact of plug.As a matter of course, for not only a data compressed file but also WAV, AIFF, and CD, it contributes to dissolve the stiffness and shallowness of digital sounds. In addition, its hi-definition playback property helps for making a good quality file recording for vinyl sound capturing.

Notes: Used by artist's such as Dubfire, Richie Hawtin and Carl Craig the d+ RCA series is specialized for DJs and designed according to feedbacks of DJs, Artists, and Clubs. By connecting between a DJ mixer and some DJ equipments such as CDJ, Traktor and Serato, you can get a huge advantage about the sound quality.

About the product planning for the d+ RCA series, Neo contemplated the best combination of important materials and factors such as its structure, conductor, insulator, shielding, outer sheath, and contact of plug.As a matter of course, for not only a data compressed file but also WAV, AIFF, and CD, it contributes to dissolve the stiffness and shallowness of digital sounds. In addition, its hi-definition playback property helps for making a good quality file recording for vinyl sound capturing.

Notes: Used by artist's such as Dubfire, Richie Hawtin and Carl Craig the d+ RCA series is specialized for DJs and designed according to feedbacks of DJs, Artists, and Clubs. By connecting between a DJ mixer and some DJ equipments such as CDJ, Traktor and Serato, you can get a huge advantage about the sound quality.

About the product planning for the d+ RCA series, Neo contemplated the best combination of important materials and factors such as its structure, conductor, insulator, shielding, outer sheath, and contact of plug.As a matter of course, for not only a data compressed file but also WAV, AIFF, and CD, it contributes to dissolve the stiffness and shallowness of digital sounds. In addition, its hi-definition playback property helps for making a good quality file recording for vinyl sound capturing.

Notes: Used by artist's such as Dubfire, Richie Hawtin and Carl Craig the d+ RCA series is specialized for DJs and designed according to feedbacks of DJs, Artists, and Clubs. By connecting between a DJ mixer and some DJ equipments such as CDJ, Traktor and Serato, you can get a huge advantage about the sound quality.

About the product planning for the d+ RCA series, Neo contemplated the best combination of important materials and factors such as its structure, conductor, insulator, shielding, outer sheath, and contact of plug.As a matter of course, for not only a data compressed file but also WAV, AIFF, and CD, it contributes to dissolve the stiffness and shallowness of digital sounds. In addition, its hi-definition playback property helps for making a good quality file recording for vinyl sound capturing.

Notes: Used by artist's such as Dubfire, Richie Hawtin and Carl Craig the d+ RCA series is specialized for DJs and designed according to feedbacks of DJs, Artists, and Clubs. By connecting between a DJ mixer and some DJ equipments such as CDJ, Traktor and Serato, you can get a huge advantage about the sound quality.

About the product planning for the d+ RCA series, Neo contemplated the best combination of important materials and factors such as its structure, conductor, insulator, shielding, outer sheath, and contact of plug.As a matter of course, for not only a data compressed file but also WAV, AIFF, and CD, it contributes to dissolve the stiffness and shallowness of digital sounds. In addition, its hi-definition playback property helps for making a good quality file recording for vinyl sound capturing.

Notes: The KMI MIDI Expander enables you to use KMI gear such as SoftStep, 12 Step and QuNeo to control your MIDI hardware devices with 5-pin MIDI DIN connectors.

Plug in your MIDI devices to the KMI MIDI Expander and you're ready to send and receive MIDI data with or without a computer.

Notes: High quality audio leads for exceptional sound quality and reliability. High grade cable comprises 2 insulated pure copper cores and global shielding. The durable PVC sheath has a soft texture and is reinforced with cotton cord to avoid tangling. Terminated at one end with a 3.5mm stereo (TRS) jack and at the other end with a 6.3mm stereo (TRS) jack plug.

Notes: Korg's MS-20 monophonic synthesizer, first introduced in 1978, is still a coveted instrument to this day, thanks to its thick, robust sound, its powerful, iconic analog filter, and its versatile patching options. Over 300,000 people have enjoyed the distinct MS-20 sounds from the original, from Korg's MS-20 plugin synth, or the iMS-20 iPad app.

Today, the sounds of the MS-20 have been reborn in hardware, as the MS-20 Mini. The same engineers who developed the original MS-20 have perfectly reproduced its circuitry and fit into a body that's been shrunk to 86% of the original size, yet retains the distinctive look of the original.

The MS-20 mini will amaze you with its absolutely authentic analog synth sound.

The Korg MS-20 Mini features 2 improved lower noise voltage controlled oscillators with selectable waveforms including ring modulation and noise, 2 voltage controlled high and low pass filters, 2 voltage controlled amplifiers, 2 envelope generators and an LFO. Part of the appeal of the original was its self oscillating, resonant filters that could be driven into distortion. They remain popular to this day and can also be found in the recent monotron and monotribe units as well as on the new MS-20 Mini.

Part of the versatility of the original Korg MS-20 was its flexible patching system, making it semi modular, and this has been recreated for the MS-20 Mini. It allows users to create uniquely complex, evolving, organic sounds by using patch cables to access and change the internal synth architecture, with the front panel flow chart guiding easy operation straight out of the box. Users can even patch external sources via the external signal processor to be processed in the same way as an oscillator, as well as benefitting from the rich harmonics added by the circuitry and filters.

This reissue of a modern classic will be an extremely welcome addition to Korg's current synth line and, with fantastic sound, versatility and ease of use, the MS-20 Mini is sure to win over many fans old and new.

Notes: A metal professional standard floor microphone stand with boom arm that is adjustable for height, angle and extension. The product features tripod style foldaway legs and has a remarkable stability when in use. The Boom arm extends 760mm.

Notes: The microKEY series are a compact family of USB MIDI keyboards featuring the velocity-sensitive Natural Touch mini-keyboard; acclaimed on instruments such as the microKORG XL and microARRANGER. In addition to the existing 37-key model, the lineup has been expanded with the addition of a supremely portable 25-key model, and a 5-octave 61-key model providing the space to play freely with both hands.

Bundled software and discount coupons are more generous than ever; the 61-key model even comes with a license for the Korg Legacy Collection. The microKEY is the ideal USB MIDI keyboard for the musician who wants to assemble a convenient and compact music production system.

The microKEY25 features excellent portability, allowing you to enjoy playing and producing with a great-feeling keyboard even when you're away from home. It features an expressive Joystick, as traditionally found on larger controllers, and provides simultaneous control of multiple parameters at the same time, along with control of the built-in tempo-synced arpeggiator function. That's not all; the microKEY25 can be powered directly from your iPad via the Camera Connection Kit, and it can be immediately used to control MIDI-capable apps such as Korg's iMS-20. The microKEY25 also includes a download code for FREE Korg M1Le software, giving you all of the preset sounds and all of the PCM waveforms of the original M1, and a browser/search function that makes it easy to find that perfect sound.

Also included are licenses for Applied Acoustics Systems' Strum Acoustic Session, Lounge Lizard Session, and Ultra Analog Session as well as a license for Toontrack's software drum sound module EzDrummer Lite, and a discount coupon for Ableton's Live, Live Suite, and Live LE DAW software, widely popular for its sophisticated functionality.

Notes: The new PerFourMer is a real analog synthesizer, through its simple control surface and very flexible sound production it is able to offer a near inexhaustible variety of bass, lead, pad and effect sounds. Additionally, with its total of 6 filter inputs, the PerFourMer is also perfectly suited as a complex filter-bank. Even though the PerFourMer is not considered a modular system, it can still be described as a modular or at the very least a semi-modular. The basic concept is reminiscent of classics such as the Oberheim 4 Voice or the Korg Monopoly.

The PerFourMer is a 4 voice synthesizer, consisting of completely independent synthesizers, which can be adjusted and played independently from each other. These 4 synthesizer channels can be linked with each other and be played in 3 different operating modes.

Next to the already mentioned filter inputs, each channel has a single output, which can also be used as an insert for external effect devices, and make it possible to easily integrate the PerFourMer with already established equipment. It is also possible to transmit the unedited VCO signal. Additionally the opportunities of the PerFourMer can be expanded through internal patching between the channels, for example; you can route a VCO through multiple filters and VCAs, or use 2 channels to create 1 voice with 2 ADSR envelopes (1 for VCA and 1 for VCF). Use the PerFourMer as a filter-bank and the slope envelope can be doubled by interconnecting the filter in series. The PerFourMer is controlled via MIDI.

www.youtube.com/watch?v=UWFsfUa9pUk

Notes: The VXLR is used to convert a mono 3.5mm mini-jack to a 3-pin XLR.

Notes: The Pro VLA II is a tube driven Vactrol-based compressor/leveling amplifier designed to excel in any professional audio environment. Superior performance and an incredible tone makes the Pro VLA II and indispensable tool for tracking, mixing, mastering, dynamic control of live sound sources or for use in broadcast audio.

Capable of delivering a far more musical natural sounding and sonically transparent compression than competitive units in its class, the Pro VLA II uses an Opto-electronic circuit rather than the more typical design VCA driven level detection circuit. This VCA-less design coupled with a 12AT7 vacuum tube in the gain stage makes the Pro-VLA II the ideal dynamic control device for critical audio applications.

Exceptional signal integrity with extremely low noise and low distortion is achieved in the Pro VLA II by utilizing a transformerless design throughout.

Unlike typical compression units that use Voltage Controlled Amplifiers (VCA's) to handle level detection, the Pro VLA II's Opto-electronic design allows a far more transparent and musical sounding compression without sounding aggressive or un-natural. This Vactrol based optical electronic circuitry is the basic component of the classic highly sought after compressors of past.

The Vactrol design allows the Pro VLA II to react to audio signal in much the same way the eye naturally adjusts to fluctuations in light levels, smoothly, quietly and almost imperceptibly.

The Pro VLA II is a soft knee leveling amplifier by design. Although capable of providing dramatic compression effects, the Pro VLA II was designed to excel in any application where transparent, expressively musical dynamics control is desired.

Large highly visible backlit analog VU meters accurately display input and output levels while extremely fast 10-segment LED's display gain reduction. For added functionality, the LED's display either average level for mastering & mixing applications or peak hold for monitoring individual sources when tracking audio.

XLR and 1/4" TRS balanced inputs and outputs are provided to ensure the Pro VLA II can connect with any audio source or hardware. A +4 dBu/-10 dBu mode switch optimizes the Pro VLA II I/O for either consumer or professional equipment.

Notes: T stands for Time.

The T-Resonator transforms timely events into an analog feedbacked filter network. What comes out of this you can hear in the audio samples.

The T-Resonator is something like an M-Resonator + Digital Delay. But you can select 8 different delay algorithms, each with different delays and different feedbacks and modulate them even with an LFO.

Delays reach from less than a millisecond to 1 second, range and structure is depending on the algorithm.

The delay feedback comes across the analog filters, of course.

You can create gaining analog echoes, klingon parties by extremely feedbacked wave guide algorithm and much more.

By the analog feedback everything sounds organic.

The screaming analog feedbacks can delay themselves and thereby form new sound patterns.

The sine LFO gets retriggered by the audio signal and can be shaped with the audio envelope or just run alone. In center position the amount is 0, to the left it's envelope-shaped LFO, to the right it's only LFO.

The filters are made from discreet parts and form a 24 dB pole lowpass filter transistor cascade.

They can, in any thinkable way, be self feedbacked and be coupled or feedbacked with each other, so that extreme sounds and chaotic states create - all what you need today for creative analog sound design.

Incredible bass gains or screaming scratch sounds are no problem. The mix pots are zeroed in center position; any other angle will couple or feedback negatively or positively. FM in both directions is also available.

The input has an adjustable gain and a Hi-Z input to plug in a guitar directly. Any line level signal can be processed, be it either mono or stereo.

NB: Comes with EU plug power supply

www.youtube.com/watch?v=P6FHbqRb9S4

Notes: The MBase11 can do only one thing, but it does it right, and it does this even better than in the past.

The MBase11 is the logical follower of the MBase01 and offers even better performance, more versatility and an even phatter sound. It generates analog bass drums, from extremely powerful to soft and covers the whole range from 909-style to 808-fashioned. And also, the LFO has 8 different waveforms including true sine that can be used to create very different envelopes. The resulting sounds are not simply kicks, this turns out to be a bass drum synthesizer.

The MBase11 has a compression parameter to vary the thickness of decaying sound. It offers a variable gate time to to create very different sounding attacks. It also has a metalise parameter to have hundreds of variations on the attack noise.

For more intuitive editing, JoMox have added an analog potentiometer that works alternatively to the parameter editing when scrolling the data wheel is too hard.

The MBase11 purposefully sounds a bit different to the XBASE 999/888, making it a great sounding expansion for our other drum products and other analog percussion.

The kick sets in very precisely and the attack sounds very snappy at all kinds of sound variations.

The MBase11 can also be used as a real bass with some limitations. If decay is cranked up it is long enough for tones and the pitch can be played on the keyboard in semitones over three octaves.

The kick drum can be triggered by an external analog trigger input. This is especially useful for live drummers who want to thicken up their live drum kit. The trigger input works with regular piezo pickups or audio signals.

Last but not least: one of the most convincing arguments for the MBase11 is the price: This is an inexpensive tool that helps you to create great kick sounds, without the time-consuming searching associated with mostly not satisfying samples. You save time and energy while reaching the sound quality you always imagined.

Tweak the sound you need. Everything is real.

Notes: Classic closed-back headphones in a low-impedance version designed to play nicely with outputs on phones, laptops and interfaces. One of the best all-round options for production.

Supplier's notes:
The Beyerdynamic DT 770 Headphones 80 Ohm are closed back dynamic headphones that use the same comfortable, sound isolating design as the 250 Ohm studio version, but with a lower resistance for general purpose and mobile applications. Because of the lower resistance, the DT 770 Pro 80 Ohm headphones are louder and work on low power devices such as smart phones, MP3 player, laptops and bus powered interfaces. Therefore, if you are working in a loud environment or using a battery operated device, the Beyerdynamic DT 770Pro 80 Ohm headphones make the perfect choice of headphone.

When out and about, you really need to block as much ambient noise out as possible and a lot of headphones do this by clamping the ear-pads as tightly to your ears as possible and using materials that absorb a lot of sound. This produces two unwanted issues; discomfort, after prolonged use; and a loss of audio quality as sound being generated by the driver is absorbed by the cup. The DT 700 Pro series avoids this by using a clever bass reflex system and a large circumaural cup design with velour pads. Of course the real technology is in the transducer itself, which produces a nominal frequency response of 5Hz to 35kHz and a nominal SPL of 96dB, an exceptional performance.

Notes: Well, it's not very glamorous, but everybody needs a patchbay. And as for the PB-48, it is a patchbay that just works, all the time, every time. It comes in 2 flavors: half-normalled or de-normalled, with 48 1/4" points on the front panel, connected to 48 1/4" points on the rear.

The PB-48 is a rugged, noise-free, versatile patchbay designed to serve all your patchbay needs, from providing clear and easy access to your mixer and other studio gear, to reducing the wear and tear on their jacks, to facilitating quick and precise rerouting of devices within your studio setup. See, not glamorous, but it works great.

The specifications:

Chassis dimensions (H x W x D): 44mm x 482mm x 68mm
Module dimensions (H x W x D): 40mm x 18mm x 68mm
Shipping weight: 1.06kg
Jacks: 1/4" phone, balanced or unbalanced.

Notes: 8000 series Genelec stand plates are designed for use together with the Iso-Pod that comes with all 8000 series monitors. The Iso-Pod allows you to tilt the monitor for optimal alignment. Simply mount the stand plate onto the 3/8" thread on the tube and ensure tight screw connection. Place the Iso-Pod over the four pins of the stand plate. The stand plate is available in black and white.

Width
93 mm

Notes: The floor stand comes with a cast iron base with an anti-vibration rubber ring. The height of the stand is adjustable from 870 to 1565 mm. It weighs 5.4 kg and its base diameter is 250 mm. Available in black color. Packed in a single cardboard box.

Stand plates which are designed to fit the Iso-Pod stand are recommended to use with this product. Please note, that we don't recommend using this product with the 8331 monitor.

Length min.
870 mm
Length max.
1565 mm
Width
250 mm

Notes: The Kenton Thru-5 is a high quality MIDI Thru box with opto-isolated MIDI In and separate drive for each MIDI Out. It is powered from a mains adaptor (wall wart) so you can fit and forget.

Comes with multi-region power supply

Notes: The Skytronic gound loop isolator is designed to connect between 2 pieces of audio equipment that have a ground loop problem

Notes: One of the hardest in the game. Dedicated kick drum synth from analogue experts Vermona. Shape your own sounds from scratch. Killer.

Supplier's notes:
The Kick Lancet generator is a handy analogue percussion synthesizer with priority to kick-drum sounds.

The heart of the Kick Lancet's sound structure is an analogue oscillator that produces sine and square waves, which can blend seamlessly from one to the other. 2 independent envelope generators with a decay/release phase can modulate the oscillator's frequency and the VCA. Additionally the VCO pitch can be modulated by the fast LFO (3Hz to 3 kHz, triangle). Noise and a pulse signal can be added in the mixer section. Vermona have a balls-controller for making it really big.

The Kick Lancet can be triggered by MIDI but beside that there are 3 different trigger inputs. A gate trigger, which impulse can trigger the Kick Lancet in normal way with additional accent or completely dynamical depending on the incoming voltage, a simply short current trigger (i.e. momentary foot switch) and an audio input, which offers the possibility to trigger the Kick Lancet by an audio signal statically or dynamically. Drum pads can also be connected here.

Notes: 3 pin XLR plug to RCA phono socket.

Notes: ZED-6 has been created for musicians, singer / songwriters and venues seeking Allen & Heath's renowned build and audio quality in a compact, portable format. Whether it's bouncing ideas around at home, performing live or recording tracks to share on YouTube and Soundcloud, ZED-6 is a versatile companion for every step of the creative journey. Featuring the new GSPre boutique preamp design, developed from the revered GS-R24 studio recording console, the ZED boasts exceptionally low noise and massive headroom, with a signature analogue warmth and depth. Guitarists will be pleased to know that ZED-6 comes with a pair of Guitar DI high impedance inputs, allowing guitars to be plugged straight into the mixer without the hassle and expense of carrying separate DI boxes.

ZED-6 features an exceptional new preamp design, created by analogue guru, Mike Griffin and developed from his highly acclaimed GS-R24 studio recording console. Known as GSPre, the preamps deliver exceptionally low noise and massive headroom, and the warmth and depth that Allen & Heath's analogue range is famous for. For tonal shaping, the precise MusiQ EQ controls have been carefully calibrated for responsiveness and precision, making it easy to shape and enhance each musical source.

All ZED mixers are designed and built to Allen & Heath's legendary touring grade standards to ensure a long life in the toughest environments. All channels are on individual, vertical circuit boards and all rotary controls are secured to the front panel with a steel nut to guard against impact damage.

ZED-6 comes with two Guitar DI high impedance jack inputs, allowing guitars to be plugged straight into the mixer without the need for DI boxes. That's one less piece of gear to buy, carry and set up.

Allen & Heath has been a trusted name in professional audio since 1969. The ZED technology advances, but the commitment to audio excellence and build quality endures.

Notes: ZED-6FX delivers Allen & Heath's renowned build and audio excellence in a compact, portable format, making it the ideal choice for quality conscious musicians, singer / songwriters and venues. Whether it's bouncing ideas around at home, performing live or recording tracks to share on YouTube and Soundcloud, ZED-6FX is a versatile companion for every step of the creative journey. Featuring the new GSPre boutique preamp design, developed from the revered GS-R24 studio recording console, the ZED boasts exceptionally low noise and massive headroom, with a signature analog warmth and depth. ZED-6FX is the first mixer to include a specially created suite of studio quality reverbs, delays and special multi-model FX, crafted by Allen & Heath's acclaimed in-house effects aficionados. Guitarists will be pleased to know that ZED-6FX comes with a pair of Guitar DI high impedance inputs, allowing guitars to be plugged straight into the mixer without the hassle and expense of carrying separate DI boxes.

ZED-6FX features an exceptional new preamp design, created by analog guru, Mike Griffin and developed from his highly acclaimed GS-R24 studio recording console. Known as GSPre, the preamps deliver exceptionally low noise and massive headroom, and the warmth and depth that Allen & Heath's analog range is famous for. For tonal shaping, the precise MusiQ EQ controls have been carefully calibrated for responsiveness and precision, making it easy to shape and enhance each musical source.

ZED-6FX boasts a brand new suite of studio quality reverbs and delays, painstakingly crafted to enhance your recordings and performances. Special multi-model effects provide uniquely dynamic combinations of reverbs and delays.

All ZED mixers are designed and built to Allen & Heath's legendary touring grade standards to ensure a long life in the toughest environments. All channels are on individual, vertical circuit boards and all rotary controls are secured to the front panel with a steel nut to guard against impact damage.

ZED-6FX comes with two Guitar DI high impedance jack inputs, allowing guitars to be plugged straight into the mixer without the need for DI boxes. That's one less piece of gear to buy, carry and set up.

Allen & Heath has been a trusted name in professional audio since 1969. The ZED technology advances, but the commitment to audio excellence and build quality endures.

Notes: ZEDi-8 gives musicians, recording artists and venues the ruggedness and hands-on control of an analog mixer, paired with the versatility and convenience of a 2×2 USB interface. Whether it's bouncing ideas around at home, performing live or recording tracks to share on YouTube and Soundcloud, ZEDi-8 is a versatile companion for every step of the creative journey. Featuring the new GSPre boutique preamp design, developed from the revered GS-R24 studio recording console, the ZED boasts exceptionally low noise and massive headroom, with a signature analog warmth and depth. Guitarists will be pleased to know that ZEDi-8 comes with a pair of Guitar DI high impedance inputs, allowing guitars to be plugged straight into the mixer without the hassle and expense of carrying separate DI boxes.

ZEDi-8 offers the best of both worlds, incorporating a studio quality 2 in / 2 out, 24-bit/96kHz USB audio interface for hassle-free recording and playback to/from a Mac or PC, or to an iOS device using the iOS camera kit. The USB output source can be set up in several different ways to match your workflow. ZEDi-8 is class compliant with Mac and iOS.

ZEDi-8 comes with the acclaimed Cubase LE software. Cubase LE offers powerful yet easy-to-use software tools for audio recording, editing, MIDI sequencing and mixing. Its vast range of proven editing and sequencing tools can be used for a large range of music styles and areas of application. From singers and songwriters recording vocal lines to rock bands jamming in their rehearsal room, Cubase LE is as easy as it gets - with outstanding audio quality as well as time-saving recording and editing functionality.

The mixer also comes bundled with the Cubasis LE app. Cubasis LE is the compact version of Steinberg's streamlined, multitouch sequencer for the iPad, providing the same look and feel of its bigger brother Cubasis. Specially designed for quick and easy operation, Cubasis LE makes recording, editing and mixing a breeze.

ZEDi-8 features an exceptional new preamp design, created by analog guru, Mike Griffin and developed from his highly acclaimed GS-R24 studio recording console. Known as GSPre, the preamps deliver exceptionally low noise and massive headroom, and the warmth and depth that Allen & Heath's analog range is famous for. For tonal shaping, the precise MusiQ EQ controls have been carefully calibrated for responsiveness and precision, making it easy to shape and enhance each musical source.

All ZED mixers are designed and built to Allen & Heath's legendary touring grade standards to ensure a long life in the toughest environments. All channels are on individual, vertical circuit boards and all rotary controls are secured to the front panel with a steel nut to guard against impact damage.

ZEDi-8 comes with two Guitar DI high impedance jack inputs, allowing guitars to be plugged straight into the mixer without the need for DI boxes. That's one less piece of gear to buy, carry and set up.

Allen & Heath has been a trusted name in professional audio since 1969. The ZED technology advances, but the commitment to audio excellence and build quality endures.

Notes: Z-Rails are mounting rails for the Eurorack modular synthesizer format and are designed to be used for professional and DIY case mounting assemblies.

Z-Rails are sold in sets of two (2) aluminium, clear or black anodized rails, each containing a nickel-plated brass threaded strip with 3mm threads using 5.08mm spacing. The racks are easy to install into any frame using two (2) M4 screws, one for each side of the individual Z-Rails.

Notes: Z-Rails are mounting rails for the Eurorack modular synthesizer format and are designed to be used for professional and DIY case mounting assemblies.

Z-Rails are sold in sets of two (2) aluminium, clear or black anodized rails, each containing a nickel-plated brass threaded strip with 3mm threads using 5.08mm spacing. The racks are easy to install into any frame using two (2) M4 screws, one for each side of the individual Z-Rails.

Notes: The ZEUS Passive Bus Board is used to distribute power to modules coming from either the first generation of ZEUS Powered Bus Board, uZEUS or any other power supply available from other manufacturers. The Passive Bus Board contain both standard quick fit terminals as well as screw terminal block for connecting to power. The quick fit connect are mounted on the bottom side of the bus board to provide clean wiring, while the screw terminal blocks available simultaneously upfront for the most simple and easy connection to power if needed.

Although called Passive, the ZEUS Passive Bus board can produce up to 220ma of +5V supply by its own built in regulator, giving you the confidence that a 5V supply will be there for you in case one of your new modules requires it.

NOTE: This board does not interface with Zeus Studio Bus

Notes: The microZEUS is a 4HP power supply module for Eurorack format synthesizers. It is the smallest and most powerful power supply available for its size.

uZEUS with flying bus boards: this version features two ribbon bus boards. All you have to do is plug in your modules and play.

The uZEUS mixes linear and switching power technology to produce 1000mA at +12V, 500mA at -12V, and 170mA at +5V and uses a standard +15VDC non-regulated wall adapter for power.